Merge branch 'qcom/drivers' into next/drivers

* qcom/drivers:
  tty: serial: Limit msm_serial_hs driver to platforms that use it
  mmc: msm_sdcc: Limit driver to platforms that use it
  usb: phy: msm: Move mach dependent code to platform data

Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/Makefile

@@ -106,7 +106,8 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
 	kirkwood-ts219-6282.dtb
 dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
 dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \
-	qcom-msm8960-cdp.dtb
+	qcom-msm8960-cdp.dtb \
+	qcom-apq8074-dragonboard.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
 	armada-370-mirabox.dtb \
 	armada-370-netgear-rn102.dtb \

arch/arm/boot/dts/qcom-apq8074-dragonboard.dts

@@ -0,0 +1,6 @@
+#include "qcom-msm8974.dtsi"
+
+/ {
+	model = "Qualcomm APQ8074 Dragonboard";
+	compatible = "qcom,apq8074-dragonboard", "qcom,apq8074";
+};

arch/arm/boot/dts/qcom-msm8974.dtsi

@@ -0,0 +1,97 @@
+/dts-v1/;
+
+#include "skeleton.dtsi"
+
+/ {
+	model = "Qualcomm MSM8974";
+	compatible = "qcom,msm8974";
+	interrupt-parent = <&intc>;
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@f9000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0xf9000000 0x1000>,
+			      <0xf9002000 0x1000>;
+		};
+
+		timer {
+			compatible = "arm,armv7-timer";
+			interrupts = <1 2 0xf08>,
+				     <1 3 0xf08>,
+				     <1 4 0xf08>,
+				     <1 1 0xf08>;
+			clock-frequency = <19200000>;
+		};
+
+		timer@f9020000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0xf9020000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@f9021000 {
+				frame-number = <0>;
+				interrupts = <0 8 0x4>,
+					     <0 7 0x4>;
+				reg = <0xf9021000 0x1000>,
+				      <0xf9022000 0x1000>;
+			};
+
+			frame@f9023000 {
+				frame-number = <1>;
+				interrupts = <0 9 0x4>;
+				reg = <0xf9023000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9024000 {
+				frame-number = <2>;
+				interrupts = <0 10 0x4>;
+				reg = <0xf9024000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9025000 {
+				frame-number = <3>;
+				interrupts = <0 11 0x4>;
+				reg = <0xf9025000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9026000 {
+				frame-number = <4>;
+				interrupts = <0 12 0x4>;
+				reg = <0xf9026000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9027000 {
+				frame-number = <5>;
+				interrupts = <0 13 0x4>;
+				reg = <0xf9027000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9028000 {
+				frame-number = <6>;
+				interrupts = <0 14 0x4>;
+				reg = <0xf9028000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		restart@fc4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0xfc4ab000 0x4>;
+		};
+	};
+};

arch/arm/configs/msm_defconfig

@@ -20,6 +20,7 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARCH_MSM=y
 CONFIG_ARCH_MSM8X60=y
 CONFIG_ARCH_MSM8960=y
+CONFIG_ARCH_MSM8974=y
 CONFIG_SMP=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
@@ -88,6 +89,8 @@ CONFIG_SSBI=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_MSM=y
 CONFIG_THERMAL=y
 CONFIG_REGULATOR=y
 CONFIG_MEDIA_SUPPORT=y

arch/arm/mach-msm/Kconfig

@@ -44,6 +44,7 @@ endchoice
 
 config ARCH_MSM8X60
 	bool "MSM8X60"
+	select ARCH_MSM_DT
 	select ARM_GIC
 	select CPU_V7
 	select GPIO_MSM_V2
@@ -52,15 +53,25 @@ config ARCH_MSM8X60
 
 config ARCH_MSM8960
 	bool "MSM8960"
+	select ARCH_MSM_DT
 	select ARM_GIC
 	select CPU_V7
 	select HAVE_SMP
 	select GPIO_MSM_V2
 	select MSM_SCM if SMP
 
+config ARCH_MSM8974
+	bool "MSM8974"
+	select ARCH_MSM_DT
+	select ARM_GIC
+	select CPU_V7
+	select HAVE_ARM_ARCH_TIMER
+	select HAVE_SMP
+	select MSM_SCM if SMP
+	select USE_OF
+
 config ARCH_MSM_DT
-	def_bool y
-	depends on (ARCH_MSM8X60 || ARCH_MSM8960)
+	bool
 	select SPARSE_IRQ
 	select USE_OF
 

arch/arm/mach-msm/board-dt.c

@@ -26,7 +26,16 @@ static const char * const msm_dt_match[] __initconst = {
 	NULL
 };
 
+static const char * const apq8074_dt_match[] __initconst = {
+	"qcom,apq8074-dragonboard",
+	NULL
+};
+
 DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
 	.smp = smp_ops(msm_smp_ops),
 	.dt_compat = msm_dt_match,
 MACHINE_END
+
+DT_MACHINE_START(APQ_DT, "Qualcomm MSM (Flattened Device Tree)")
+	.dt_compat = apq8074_dt_match,
+MACHINE_END

arch/arm/mach-msm/board-msm7x30.c

@@ -30,6 +30,7 @@
 #include <asm/memory.h>
 #include <asm/setup.h>
 
+#include <mach/clk.h>
 #include <mach/msm_iomap.h>
 #include <mach/dma.h>
 
@@ -60,10 +61,44 @@ static int hsusb_phy_init_seq[] = {
 	-1
 };
 
+static int hsusb_link_clk_reset(struct clk *link_clk, bool assert)
+{
+	int ret;
+
+	if (assert) {
+		ret = clk_reset(link_clk, CLK_RESET_ASSERT);
+		if (ret)
+			pr_err("usb hs_clk assert failed\n");
+	} else {
+		ret = clk_reset(link_clk, CLK_RESET_DEASSERT);
+		if (ret)
+			pr_err("usb hs_clk deassert failed\n");
+	}
+	return ret;
+}
+
+static int hsusb_phy_clk_reset(struct clk *phy_clk)
+{
+	int ret;
+
+	ret = clk_reset(phy_clk, CLK_RESET_ASSERT);
+	if (ret) {
+		pr_err("usb phy clk assert failed\n");
+		return ret;
+	}
+	usleep_range(10000, 12000);
+	ret = clk_reset(phy_clk, CLK_RESET_DEASSERT);
+	if (ret)
+		pr_err("usb phy clk deassert failed\n");
+	return ret;
+}
+
 static struct msm_otg_platform_data msm_otg_pdata = {
 	.phy_init_seq		= hsusb_phy_init_seq,
 	.mode                   = USB_PERIPHERAL,
 	.otg_control		= OTG_PHY_CONTROL,
+	.link_clk_reset		= hsusb_link_clk_reset,
+	.phy_clk_reset		= hsusb_phy_clk_reset,
 };
 
 struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {

arch/arm/mach-msm/board-qsd8x50.c

@@ -31,6 +31,7 @@
 #include <mach/irqs.h>
 #include <mach/sirc.h>
 #include <mach/vreg.h>
+#include <mach/clk.h>
 #include <linux/platform_data/mmc-msm_sdcc.h>
 
 #include "devices.h"
@@ -81,10 +82,44 @@ static int hsusb_phy_init_seq[] = {
 	-1
 };
 
+static int hsusb_link_clk_reset(struct clk *link_clk, bool assert)
+{
+	int ret;
+
+	if (assert) {
+		ret = clk_reset(link_clk, CLK_RESET_ASSERT);
+		if (ret)
+			pr_err("usb hs_clk assert failed\n");
+	} else {
+		ret = clk_reset(link_clk, CLK_RESET_DEASSERT);
+		if (ret)
+			pr_err("usb hs_clk deassert failed\n");
+	}
+	return ret;
+}
+
+static int hsusb_phy_clk_reset(struct clk *phy_clk)
+{
+	int ret;
+
+	ret = clk_reset(phy_clk, CLK_RESET_ASSERT);
+	if (ret) {
+		pr_err("usb phy clk assert failed\n");
+		return ret;
+	}
+	usleep_range(10000, 12000);
+	ret = clk_reset(phy_clk, CLK_RESET_DEASSERT);
+	if (ret)
+		pr_err("usb phy clk deassert failed\n");
+	return ret;
+}
+
 static struct msm_otg_platform_data msm_otg_pdata = {
 	.phy_init_seq		= hsusb_phy_init_seq,
 	.mode                   = USB_PERIPHERAL,
 	.otg_control		= OTG_PHY_CONTROL,
+	.link_clk_reset		= hsusb_link_clk_reset,
+	.phy_clk_reset		= hsusb_phy_clk_reset,
 };
 
 static struct platform_device *devices[] __initdata = {

arch/arm/mach-msm/board-trout.c

@@ -13,6 +13,7 @@
  * GNU General Public License for more details.
  *
  */
+#define pr_fmt(fmt) "%s: " fmt, __func__
 
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -68,12 +69,11 @@ static void __init trout_init(void)
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-#ifdef CONFIG_MMC
+	if (IS_ENABLED(CONFIG_MMC)) {
 		rc = trout_init_mmc(system_rev);
 		if (rc)
-                printk(KERN_CRIT "%s: MMC init failure (%d)\n", __func__, rc);
-#endif
-
+			pr_crit("MMC init failure (%d)\n", rc);
+	}
 }
 
 static struct map_desc trout_io_desc[] __initdata = {

drivers/mmc/host/Kconfig

@@ -324,7 +324,7 @@ config MMC_ATMELMCI
 
 config MMC_MSM
 	tristate "Qualcomm SDCC Controller Support"
-	depends on MMC && ARCH_MSM
+	depends on MMC && (ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50)
 	help
 	  This provides support for the SD/MMC cell found in the
 	  MSM and QSD SOCs from Qualcomm. The controller also has

drivers/tty/serial/Kconfig

@@ -1035,7 +1035,7 @@ config SERIAL_MSM_CONSOLE
 
 config SERIAL_MSM_HS
 	tristate "MSM UART High Speed: Serial Driver"
-	depends on ARCH_MSM
+	depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
 	select SERIAL_CORE
 	help
 	  If you have a machine based on MSM family of SoCs, you

drivers/usb/phy/phy-msm-usb.c

@@ -40,8 +40,6 @@
 #include <linux/usb/msm_hsusb_hw.h>
 #include <linux/regulator/consumer.h>
 
-#include <mach/clk.h>
-
 #define MSM_USB_BASE	(motg->regs)
 #define DRIVER_NAME	"msm_otg"
 
@@ -308,33 +306,30 @@ static void ulpi_init(struct msm_otg *motg)
 
 static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert)
 {
-	int ret;
+	int ret = 0;
 
-	if (assert) {
-		ret = clk_reset(motg->clk, CLK_RESET_ASSERT);
+	if (!motg->pdata->link_clk_reset)
+		return ret;
+
+	ret = motg->pdata->link_clk_reset(motg->clk, assert);
 	if (ret)
-			dev_err(motg->phy.dev, "usb hs_clk assert failed\n");
-	} else {
-		ret = clk_reset(motg->clk, CLK_RESET_DEASSERT);
-		if (ret)
-			dev_err(motg->phy.dev, "usb hs_clk deassert failed\n");
-	}
+		dev_err(motg->phy.dev, "usb link clk reset %s failed\n",
+			assert ? "assert" : "deassert");
+
 	return ret;
 }
 
 static int msm_otg_phy_clk_reset(struct msm_otg *motg)
 {
-	int ret;
+	int ret = 0;
 
-	ret = clk_reset(motg->phy_reset_clk, CLK_RESET_ASSERT);
-	if (ret) {
-		dev_err(motg->phy.dev, "usb phy clk assert failed\n");
+	if (!motg->pdata->phy_clk_reset)
 		return ret;
-	}
-	usleep_range(10000, 12000);
-	ret = clk_reset(motg->phy_reset_clk, CLK_RESET_DEASSERT);
+
+	ret = motg->pdata->phy_clk_reset(motg->phy_reset_clk);
 	if (ret)
-		dev_err(motg->phy.dev, "usb phy clk deassert failed\n");
+		dev_err(motg->phy.dev, "usb phy clk reset failed\n");
+
 	return ret;
 }
 

include/linux/usb/msm_hsusb.h

@@ -20,6 +20,7 @@
 
 #include <linux/types.h>
 #include <linux/usb/otg.h>
+#include <linux/clk.h>
 
 /**
  * Supported USB modes
@@ -135,6 +136,8 @@ struct msm_otg_platform_data {
 	enum msm_usb_phy_type phy_type;
 	void (*setup_gpio)(enum usb_otg_state state);
 	char *pclk_src_name;
+	int (*link_clk_reset)(struct clk *link_clk, bool assert);
+	int (*phy_clk_reset)(struct clk *phy_clk);
 };
 
 /**