mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-14 12:49:08 +00:00
libata: remove no longer needed pata_winbond driver
Winbond W83759A controller is fully supported by pata_legacy driver so remove no longer needed pata_winbond driver. Leave PATA_WINBOND_VLB config option for compatibility reasons and teach pata_legacy to preserve the old behavior of pata_winbond driver. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
This commit is contained in:
Bartlomiej Zolnierkiewicz
Jeff Garzik
parent
aba8a08ded
commit
6d981b9a91
@ -828,6 +828,7 @@ config PATA_SAMSUNG_CF
|
||||
config PATA_WINBOND_VLB
|
||||
tristate "Winbond W83759A VLB PATA support (Experimental)"
|
||||
depends on ISA && EXPERIMENTAL
|
||||
select PATA_LEGACY
|
||||
help
|
||||
Support for the Winbond W83759A controller on Vesa Local Bus
|
||||
systems.
|
||||
|
||||
@ -89,7 +89,6 @@ obj-$(CONFIG_PATA_QDI) += pata_qdi.o
|
||||
obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o
|
||||
obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o
|
||||
obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o
|
||||
obj-$(CONFIG_PATA_WINBOND_VLB) += pata_winbond.o
|
||||
|
||||
obj-$(CONFIG_PATA_PXA) += pata_pxa.o
|
||||
|
||||
|
||||
@ -44,6 +44,9 @@
|
||||
* Specific support is included for the ht6560a/ht6560b/opti82c611a/
|
||||
* opti82c465mv/promise 20230c/20630/qdi65x0/winbond83759A
|
||||
*
|
||||
* Support for the Winbond 83759A when operating in advanced mode.
|
||||
* Multichip mode is not currently supported.
|
||||
*
|
||||
* Use the autospeed and pio_mask options with:
|
||||
* Appian ADI/2 aka CLPD7220 or AIC25VL01.
|
||||
* Use the jumpers, autospeed and set pio_mask to the mode on the jumpers with
|
||||
@ -135,12 +138,18 @@ static int ht6560b; /* HT 6560A on primary 1, second 2, both 3 */
|
||||
static int opti82c611a; /* Opti82c611A on primary 1, sec 2, both 3 */
|
||||
static int opti82c46x; /* Opti 82c465MV present(pri/sec autodetect) */
|
||||
static int qdi; /* Set to probe QDI controllers */
|
||||
static int winbond; /* Set to probe Winbond controllers,
|
||||
give I/O port if non standard */
|
||||
static int autospeed; /* Chip present which snoops speed changes */
|
||||
static int pio_mask = ATA_PIO4; /* PIO range for autospeed devices */
|
||||
static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */
|
||||
|
||||
#ifdef PATA_WINBOND_VLB_MODULE
|
||||
static int winbond = 1; /* Set to probe Winbond controllers,
|
||||
give I/O port if non standard */
|
||||
#else
|
||||
static int winbond; /* Set to probe Winbond controllers,
|
||||
give I/O port if non standard */
|
||||
#endif
|
||||
|
||||
/**
|
||||
* legacy_probe_add - Add interface to probe list
|
||||
* @port: Controller port
|
||||
@ -1297,6 +1306,7 @@ MODULE_AUTHOR("Alan Cox");
|
||||
MODULE_DESCRIPTION("low-level driver for legacy ATA");
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_VERSION(DRV_VERSION);
|
||||
MODULE_ALIAS("pata_winbond");
|
||||
|
||||
module_param(probe_all, int, 0);
|
||||
module_param(autospeed, int, 0);
|
||||
@ -1305,6 +1315,7 @@ module_param(ht6560b, int, 0);
|
||||
module_param(opti82c611a, int, 0);
|
||||
module_param(opti82c46x, int, 0);
|
||||
module_param(qdi, int, 0);
|
||||
module_param(winbond, int, 0);
|
||||
module_param(pio_mask, int, 0);
|
||||
module_param(iordy_mask, int, 0);
|
||||
|
||||
|
||||
@ -1,282 +0,0 @@
|
||||
/*
|
||||
* pata_winbond.c - Winbond VLB ATA controllers
|
||||
* (C) 2006 Red Hat
|
||||
*
|
||||
* Support for the Winbond 83759A when operating in advanced mode.
|
||||
* Multichip mode is not currently supported.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/blkdev.h>
|
||||
#include <linux/delay.h>
|
||||
#include <scsi/scsi_host.h>
|
||||
#include <linux/libata.h>
|
||||
#include <linux/platform_device.h>
|
||||
|
||||
#define DRV_NAME "pata_winbond"
|
||||
#define DRV_VERSION "0.0.3"
|
||||
|
||||
#define NR_HOST 4 /* Two winbond controllers, two channels each */
|
||||
|
||||
struct winbond_data {
|
||||
unsigned long config;
|
||||
struct platform_device *platform_dev;
|
||||
};
|
||||
|
||||
static struct ata_host *winbond_host[NR_HOST];
|
||||
static struct winbond_data winbond_data[NR_HOST];
|
||||
static int nr_winbond_host;
|
||||
|
||||
#ifdef MODULE
|
||||
static int probe_winbond = 1;
|
||||
#else
|
||||
static int probe_winbond;
|
||||
#endif
|
||||
|
||||
static DEFINE_SPINLOCK(winbond_lock);
|
||||
|
||||
static void winbond_writecfg(unsigned long port, u8 reg, u8 val)
|
||||
{
|
||||
unsigned long flags;
|
||||
spin_lock_irqsave(&winbond_lock, flags);
|
||||
outb(reg, port + 0x01);
|
||||
outb(val, port + 0x02);
|
||||
spin_unlock_irqrestore(&winbond_lock, flags);
|
||||
}
|
||||
|
||||
static u8 winbond_readcfg(unsigned long port, u8 reg)
|
||||
{
|
||||
u8 val;
|
||||
|
||||
unsigned long flags;
|
||||
spin_lock_irqsave(&winbond_lock, flags);
|
||||
outb(reg, port + 0x01);
|
||||
val = inb(port + 0x02);
|
||||
spin_unlock_irqrestore(&winbond_lock, flags);
|
||||
|
||||
return val;
|
||||
}
|
||||
|
||||
static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
||||
{
|
||||
struct ata_timing t;
|
||||
struct winbond_data *winbond = ap->host->private_data;
|
||||
int active, recovery;
|
||||
u8 reg;
|
||||
int timing = 0x88 + (ap->port_no * 4) + (adev->devno * 2);
|
||||
|
||||
reg = winbond_readcfg(winbond->config, 0x81);
|
||||
|
||||
/* Get the timing data in cycles */
|
||||
if (reg & 0x40) /* Fast VLB bus, assume 50MHz */
|
||||
ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
|
||||
else
|
||||
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
|
||||
|
||||
active = (clamp_val(t.active, 3, 17) - 1) & 0x0F;
|
||||
recovery = (clamp_val(t.recover, 1, 15) + 1) & 0x0F;
|
||||
timing = (active << 4) | recovery;
|
||||
winbond_writecfg(winbond->config, timing, reg);
|
||||
|
||||
/* Load the setup timing */
|
||||
|
||||
reg = 0x35;
|
||||
if (adev->class != ATA_DEV_ATA)
|
||||
reg |= 0x08; /* FIFO off */
|
||||
if (!ata_pio_need_iordy(adev))
|
||||
reg |= 0x02; /* IORDY off */
|
||||
reg |= (clamp_val(t.setup, 0, 3) << 6);
|
||||
winbond_writecfg(winbond->config, timing + 1, reg);
|
||||
}
|
||||
|
||||
|
||||
static unsigned int winbond_data_xfer(struct ata_device *dev,
|
||||
unsigned char *buf, unsigned int buflen, int rw)
|
||||
{
|
||||
struct ata_port *ap = dev->link->ap;
|
||||
int slop = buflen & 3;
|
||||
|
||||
if (ata_id_has_dword_io(dev->id)) {
|
||||
if (rw == READ)
|
||||
ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
|
||||
else
|
||||
iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
|
||||
|
||||
if (unlikely(slop)) {
|
||||
__le32 pad;
|
||||
if (rw == READ) {
|
||||
pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr));
|
||||
memcpy(buf + buflen - slop, &pad, slop);
|
||||
} else {
|
||||
memcpy(&pad, buf + buflen - slop, slop);
|
||||
iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr);
|
||||
}
|
||||
buflen += 4 - slop;
|
||||
}
|
||||
} else
|
||||
buflen = ata_sff_data_xfer(dev, buf, buflen, rw);
|
||||
|
||||
return buflen;
|
||||
}
|
||||
|
||||
static struct scsi_host_template winbond_sht = {
|
||||
ATA_PIO_SHT(DRV_NAME),
|
||||
};
|
||||
|
||||
static struct ata_port_operations winbond_port_ops = {
|
||||
.inherits = &ata_sff_port_ops,
|
||||
.sff_data_xfer = winbond_data_xfer,
|
||||
.cable_detect = ata_cable_40wire,
|
||||
.set_piomode = winbond_set_piomode,
|
||||
};
|
||||
|
||||
/**
|
||||
* winbond_init_one - attach a winbond interface
|
||||
* @type: Type to display
|
||||
* @io: I/O port start
|
||||
* @irq: interrupt line
|
||||
* @fast: True if on a > 33Mhz VLB
|
||||
*
|
||||
* Register a VLB bus IDE interface. Such interfaces are PIO and we
|
||||
* assume do not support IRQ sharing.
|
||||
*/
|
||||
|
||||
static __init int winbond_init_one(unsigned long port)
|
||||
{
|
||||
struct platform_device *pdev;
|
||||
u8 reg;
|
||||
int i, rc;
|
||||
|
||||
reg = winbond_readcfg(port, 0x81);
|
||||
reg |= 0x80; /* jumpered mode off */
|
||||
winbond_writecfg(port, 0x81, reg);
|
||||
reg = winbond_readcfg(port, 0x83);
|
||||
reg |= 0xF0; /* local control */
|
||||
winbond_writecfg(port, 0x83, reg);
|
||||
reg = winbond_readcfg(port, 0x85);
|
||||
reg |= 0xF0; /* programmable timing */
|
||||
winbond_writecfg(port, 0x85, reg);
|
||||
|
||||
reg = winbond_readcfg(port, 0x81);
|
||||
|
||||
if (!(reg & 0x03)) /* Disabled */
|
||||
return -ENODEV;
|
||||
|
||||
for (i = 0; i < 2 ; i ++) {
|
||||
unsigned long cmd_port = 0x1F0 - (0x80 * i);
|
||||
unsigned long ctl_port = cmd_port + 0x206;
|
||||
struct ata_host *host;
|
||||
struct ata_port *ap;
|
||||
void __iomem *cmd_addr, *ctl_addr;
|
||||
|
||||
if (!(reg & (1 << i)))
|
||||
continue;
|
||||
|
||||
pdev = platform_device_register_simple(DRV_NAME, nr_winbond_host, NULL, 0);
|
||||
if (IS_ERR(pdev))
|
||||
return PTR_ERR(pdev);
|
||||
|
||||
rc = -ENOMEM;
|
||||
host = ata_host_alloc(&pdev->dev, 1);
|
||||
if (!host)
|
||||
goto err_unregister;
|
||||
ap = host->ports[0];
|
||||
|
||||
rc = -ENOMEM;
|
||||
cmd_addr = devm_ioport_map(&pdev->dev, cmd_port, 8);
|
||||
ctl_addr = devm_ioport_map(&pdev->dev, ctl_port, 1);
|
||||
if (!cmd_addr || !ctl_addr)
|
||||
goto err_unregister;
|
||||
|
||||
ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", cmd_port, ctl_port);
|
||||
|
||||
ap->ops = &winbond_port_ops;
|
||||
ap->pio_mask = ATA_PIO4;
|
||||
ap->flags |= ATA_FLAG_SLAVE_POSS;
|
||||
ap->ioaddr.cmd_addr = cmd_addr;
|
||||
ap->ioaddr.altstatus_addr = ctl_addr;
|
||||
ap->ioaddr.ctl_addr = ctl_addr;
|
||||
ata_sff_std_ports(&ap->ioaddr);
|
||||
|
||||
/* hook in a private data structure per channel */
|
||||
host->private_data = &winbond_data[nr_winbond_host];
|
||||
winbond_data[nr_winbond_host].config = port;
|
||||
winbond_data[nr_winbond_host].platform_dev = pdev;
|
||||
|
||||
/* activate */
|
||||
rc = ata_host_activate(host, 14 + i, ata_sff_interrupt, 0,
|
||||
&winbond_sht);
|
||||
if (rc)
|
||||
goto err_unregister;
|
||||
|
||||
winbond_host[nr_winbond_host++] = dev_get_drvdata(&pdev->dev);
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
||||
err_unregister:
|
||||
platform_device_unregister(pdev);
|
||||
return rc;
|
||||
}
|
||||
|
||||
/**
|
||||
* winbond_init - attach winbond interfaces
|
||||
*
|
||||
* Attach winbond IDE interfaces by scanning the ports it may occupy.
|
||||
*/
|
||||
|
||||
static __init int winbond_init(void)
|
||||
{
|
||||
static const unsigned long config[2] = { 0x130, 0x1B0 };
|
||||
|
||||
int ct = 0;
|
||||
int i;
|
||||
|
||||
if (probe_winbond == 0)
|
||||
return -ENODEV;
|
||||
|
||||
/*
|
||||
* Check both base addresses
|
||||
*/
|
||||
|
||||
for (i = 0; i < 2; i++) {
|
||||
if (probe_winbond & (1<<i)) {
|
||||
int ret = 0;
|
||||
unsigned long port = config[i];
|
||||
|
||||
if (request_region(port, 2, "pata_winbond")) {
|
||||
ret = winbond_init_one(port);
|
||||
if (ret <= 0)
|
||||
release_region(port, 2);
|
||||
else ct+= ret;
|
||||
}
|
||||
}
|
||||
}
|
||||
if (ct != 0)
|
||||
return 0;
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
static __exit void winbond_exit(void)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < nr_winbond_host; i++) {
|
||||
ata_host_detach(winbond_host[i]);
|
||||
release_region(winbond_data[i].config, 2);
|
||||
platform_device_unregister(winbond_data[i].platform_dev);
|
||||
}
|
||||
}
|
||||
|
||||
MODULE_AUTHOR("Alan Cox");
|
||||
MODULE_DESCRIPTION("low-level driver for Winbond VL ATA");
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_VERSION(DRV_VERSION);
|
||||
|
||||
module_init(winbond_init);
|
||||
module_exit(winbond_exit);
|
||||
|
||||
module_param(probe_winbond, int, 0);
|
||||
|
||||
Loading…
Reference in New Issue
Block a user