ARM: nomadik: convert all clocks except timer to dt

This moves all Nomadik clocks except the one used for the
timer/clocksource over to the device tree.

Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Documentation/devicetree/bindings/arm/ste-nomadik.txt

@@ -3,6 +3,11 @@ ST-Ericsson Nomadik Device Tree Bindings
 For various board the "board" node may contain specific properties
 that pertain to this particular board, such as board-specific GPIOs.
 
+Required root node property: src
+- Nomadik System and reset controller used for basic chip control, clock
+  and reset line control.
+- compatible: must be "stericsson,nomadik,src"
+
 Boards with the Nomadik SoC include:
 
 S8815 "MiniKit" manufactured by Calao Systems:

arch/arm/boot/dts/ste-nomadik-stn8815.dtsi

@@ -45,6 +45,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		gpio-bank = <0>;
+		clocks = <&pclk>;
 	};
 
 	gpio1: gpio@101e5000 {
@@ -57,6 +58,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		gpio-bank = <1>;
+		clocks = <&pclk>;
 	};
 
 	gpio2: gpio@101e6000 {
@@ -69,6 +71,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		gpio-bank = <2>;
+		clocks = <&pclk>;
 	};
 
 	gpio3: gpio@101e7000 {
@@ -81,12 +84,50 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		gpio-bank = <3>;
+		clocks = <&pclk>;
 	};
 
 	pinctrl {
 		compatible = "stericsson,nmk-pinctrl-stn8815";
 	};
 
+	src: src@101e0000 {
+		compatible = "stericsson,nomadik-src";
+		reg = <0x101e0000 0x1000>;
+		clocks {
+			/*
+			 * Dummy clock for primecells
+			 */
+			pclk: pclk@0 {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <2400000>;
+			};
+			/*
+			 * The 2.4 MHz TIMCLK reference clock is active at
+			 * boot time, this is actually the MXTALCLK @19.2 MHz
+			 * divided by 8. This clock is used by the timers and
+			 * watchdog. See page 105 ff.
+			 */
+			timclk: timclk@2.4M {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <2400000>;
+			};
+			/*
+			 * At boot time, PLL2 is set to generate a set of
+			 * fixed clocks, one of them is CLK48, the 48 MHz
+			 * clock, routed to the UART, MMC/SD, I2C, IrDA,
+			 * USB and SSP blocks.
+			 */
+			clk48: clk48@48M {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <48000000>;
+			};
+		};
+	};
+
 	/* A NAND flash of 128 MiB */
 	fsmc: flash@40000000 {
 		compatible = "stericsson,fsmc-nand";
@@ -97,6 +138,7 @@
 			<0x41000000 0x2000>,	/* NAND Base ADDR */
 			<0x40800000 0x2000>;	/* NAND Base CMD */
 		reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
+		clocks = <&pclk>;
 		status = "okay";
 
 		partition@0 {
@@ -211,6 +253,8 @@
 			reg = <0x101fd000 0x1000>;
 			interrupt-parent = <&vica>;
 			interrupts = <12>;
+			clocks = <&clk48>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
 		};
 
 		uart1: uart@101fb000 {
@@ -218,6 +262,8 @@
 			reg = <0x101fb000 0x1000>;
 			interrupt-parent = <&vica>;
 			interrupts = <17>;
+			clocks = <&clk48>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
 		};
 
 		uart2: uart@101f2000 {
@@ -225,17 +271,23 @@
 			reg = <0x101f2000 0x1000>;
 			interrupt-parent = <&vica>;
 			interrupts = <28>;
+			clocks = <&clk48>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
 			status = "disabled";
 		};
 
 		rng: rng@101b0000 {
 			compatible = "arm,primecell";
 			reg = <0x101b0000 0x1000>;
+			clocks = <&clk48>, <&pclk>;
+			clock-names = "rng", "apb_pclk";
 		};
 
 		rtc: rtc@101e8000 {
 			compatible = "arm,pl031", "arm,primecell";
 			reg = <0x101e8000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 			interrupt-parent = <&vica>;
 			interrupts = <10>;
 		};
@@ -243,6 +295,8 @@
 		mmcsd: sdi@101f6000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x101f6000 0x1000>;
+			clocks = <&clk48>, <&pclk>;
+			clock-names = "mclk", "apb_pclk";
 			interrupt-parent = <&vica>;
 			interrupts = <22>;
 			max-frequency = <48000000>;

arch/arm/mach-nomadik/cpu-8815.c

@@ -280,28 +280,12 @@ device_initcall(cpu8815_mmcsd_init);
 
 /* These are mostly to get the right device names for the clock lookups */
 static struct of_dev_auxdata cpu8815_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO0_BASE,
-		"gpio.0", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO1_BASE,
-		"gpio.1", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO2_BASE,
-		"gpio.2", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO3_BASE,
-		"gpio.3", NULL),
 	OF_DEV_AUXDATA("stericsson,nmk-pinctrl-stn8815", 0,
 		"pinctrl-stn8815", NULL),
-	OF_DEV_AUXDATA("arm,primecell", NOMADIK_UART0_BASE,
-		"uart0", NULL),
-	OF_DEV_AUXDATA("arm,primecell", NOMADIK_UART1_BASE,
-		"uart1", NULL),
-	OF_DEV_AUXDATA("arm,primecell", NOMADIK_RNG_BASE,
-		"rng", NULL),
-	OF_DEV_AUXDATA("arm,primecell", NOMADIK_RTC_BASE,
-		"rtc-pl031", NULL),
 	OF_DEV_AUXDATA("stericsson,fsmc-nand", NOMADIK_FSMC_BASE,
-		"fsmc-nand", &cpu8815_nand_data),
+		NULL, &cpu8815_nand_data),
 	OF_DEV_AUXDATA("arm,primecell", NOMADIK_SDI_BASE,
-		"mmci", &mmcsd_plat_data),
+		NULL, &mmcsd_plat_data),
 	{ /* sentinel */ },
 };
 

drivers/clk/clk-nomadik.c

@@ -3,24 +3,24 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/clk-provider.h>
+#include <linux/of.h>
 
 /*
  * The Nomadik clock tree is described in the STN8815A12 DB V4.2
  * reference manual for the chip, page 94 ff.
  */
 
+static const __initconst struct of_device_id cpu8815_clk_match[] = {
+	{ .compatible = "fixed-clock", .data = of_fixed_clk_setup, },
+	{ /* sentinel */ }
+};
+
 void __init nomadik_clk_init(void)
 {
 	struct clk *clk;
 
 	clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
 	clk_register_clkdev(clk, "apb_pclk", NULL);
-	clk_register_clkdev(clk, NULL, "gpio.0");
-	clk_register_clkdev(clk, NULL, "gpio.1");
-	clk_register_clkdev(clk, NULL, "gpio.2");
-	clk_register_clkdev(clk, NULL, "gpio.3");
-	clk_register_clkdev(clk, NULL, "rng");
-	clk_register_clkdev(clk, NULL, "fsmc-nand");
 
 	/*
 	 * The 2.4 MHz TIMCLK reference clock is active at boot time, this is
@@ -32,17 +32,5 @@ void __init nomadik_clk_init(void)
 	clk_register_clkdev(clk, NULL, "mtu0");
 	clk_register_clkdev(clk, NULL, "mtu1");
 
-	/*
-	 * At boot time, PLL2 is set to generate a set of fixed clocks,
-	 * one of them is CLK48, the 48 MHz clock, routed to the UART, MMC/SD
-	 * I2C, IrDA, USB and SSP blocks.
-	 */
-	clk = clk_register_fixed_rate(NULL, "CLK48", NULL, CLK_IS_ROOT,
-				      48000000);
-	clk_register_clkdev(clk, NULL, "uart0");
-	clk_register_clkdev(clk, NULL, "uart1");
-	clk_register_clkdev(clk, NULL, "mmci");
-	clk_register_clkdev(clk, NULL, "ssp");
-	clk_register_clkdev(clk, NULL, "nmk-i2c.0");
-	clk_register_clkdev(clk, NULL, "nmk-i2c.1");
+	of_clk_init(cpu8815_clk_match);
 }