sky2: truncate oversize packets

Turn on truncation to prevent getting choked by frames larger than expected.
Without this fix, driver hangs after receiving an oversize packet.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
This commit is contained in:
Stephen Hemminger 2006-03-07 11:06:37 -08:00 committed by Francois Romieu
parent b19666d920
commit 70f1be4812

View File

@ -622,8 +622,8 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
/* Configure Rx MAC FIFO */
sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR);
sky2_write16(hw, SK_REG(port, RX_GMF_CTRL_T),
GMF_RX_CTRL_DEF);
sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
GMF_OPER_ON | GMF_RX_F_FL_ON);
/* Flush Rx MAC FIFO on any flow control or error */
sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR);
@ -995,6 +995,10 @@ static int sky2_rx_start(struct sky2_port *sky2)
sky2_rx_add(sky2, re->mapaddr);
}
/* Truncate oversize frames */
sky2_write16(hw, SK_REG(sky2->port, RX_GMF_TR_THR), sky2->rx_bufsize - 8);
sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON);
/* Tell chip about available buffers */
sky2_write16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX), sky2->rx_put);
sky2->rx_last_put = sky2_read16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX));
@ -1712,10 +1716,12 @@ static void sky2_tx_timeout(struct net_device *dev)
#define roundup(x, y) ((((x)+((y)-1))/(y))*(y))
/* Want receive buffer size to be multiple of 64 bits, and incl room for vlan */
/* Want receive buffer size to be multiple of 64 bits
* and incl room for vlan and truncation
*/
static inline unsigned sky2_buf_size(int mtu)
{
return roundup(mtu + ETH_HLEN + 4, 8);
return roundup(mtu + ETH_HLEN + VLAN_HLEN, 8) + 8;
}
static int sky2_change_mtu(struct net_device *dev, int new_mtu)
@ -1798,7 +1804,7 @@ static struct sk_buff *sky2_receive(struct sky2_port *sky2,
if (!(status & GMR_FS_RX_OK))
goto resubmit;
if ((status >> 16) != length || length > sky2->rx_bufsize)
if (length > sky2->netdev->mtu + ETH_HLEN)
goto oversize;
if (length < copybreak) {