Pin control fixes for the v4.2 series:

- Some dead defines dropped from the Samsung driver, was
   targeted for -rc2 but got delayed
 - Drop the strict mode from abx500, this was too strict
 - Fix the R-Car sparse IRQs code to work as intended
 - Fix the IRQ code for the pinctrl-single GPIO backend to not
   enforce threaded IRQs
 - Clear the latched events/IRQs for the Broadcom BCM2835
   driver
 - Fix up debugfs for the Freescale imx1 driver
 - Fix a typo bug in the Schmitt Trigger setup in the LPC18xx
   driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVrpAVAAoJEEEQszewGV1zeq8P/1hIdJfHYpVb5whr4Cxq2JFh
 RHKFCBGI75JDj+K7dBjJkflBxnb158rFA7QxEumEFp2VnWFUzlFJeirGDM9KArXO
 Wxsp+Lm9oO8U7T1dUXhsEZJTmVNXSiNcYbuaYOkxtuVn4YlVSS/XB3T8dcXPzKRG
 3BHuKnOA5qpcvM9FaA1O1UiPwR/wc/SrtX38+c1Wt0dXJO+Tgj9PtiiK6iUQHskZ
 rbsxXZEBTP2mcmBBXNtMXbAh9qnL88uG44zSEv1nTDr/jHVYftIVnTdQ07ICT3S9
 mCKEloeZuvHPIkttZ9Ddlj5Jf5PbaqvJllSHhE9FPGEjkOgAtfNdf0zN+Zbqhj0F
 aZAHtknYRsOXFDKAHJckUvXlumFrOSd/8vDIeaVwC807Lz190syBdgUbKVBtzZYf
 r7+HC1y3XIyLk2M2ZiQLwaYJPr5DJqxNgxMm7Wg/E0mmwScPhvMhrYKNJQvSu2f2
 hE/l0XigFxaY7JYAj49ltjaCOKXy02IMGTcT7MAYS9mSWeI8XFI+xPN2ZjiUkQLS
 4nLG4oC9FfCndcAEYf4f/86L9F1k+5ysH+DsEbkB6aCjz1D3Lijb+IzoRJTH9CE9
 jRyQbhtaC3kPJb7Ucsr4RBVCLOevu8E6xiBp0mdeeSc9a2mHZcrE1IVTU033oNOp
 GDhPSA4vZApj0YJqZdTw
 =pDEn
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
 "Here are some overly ripe pin control fixes for the v4.2 series.

  They got delayed because of various crap commits and having to clean
  and rinse the patch stack a few times.  Now they are however looking
  good.

   - some dead defines dropped from the Samsung driver, was targeted for
     -rc2 but got delayed
   - drop the strict mode from abx500, this was too strict
   - fix the R-Car sparse IRQs code to work as intended
   - fix the IRQ code for the pinctrl-single GPIO backend to not enforce
     threaded IRQs
   - clear the latched events/IRQs for the Broadcom BCM2835 driver
   - fix up debugfs for the Freescale imx1 driver
   - fix a typo bug in the Schmitt Trigger setup in the LPC18xx driver"

* tag 'pinctrl-v4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: lpc18xx: fix schmitt trigger setup
  Subject: pinctrl: imx1-core: Fix debug output in .pin_config_set callback
  pinctrl: bcm2835: Clear the event latch register when disabling interrupts
  pinctrl: single: ensure pcs irq will not be forced threaded
  sh-pfc: fix sparse GPIOs for R-Car SoCs
  pinctrl: abx500: remove strict mode
  pinctrl: samsung: Remove old unused defines

drivers/pinctrl/bcm/pinctrl-bcm2835.c

@@ -473,6 +473,8 @@ static void bcm2835_gpio_irq_disable(struct irq_data *data)
 
 	spin_lock_irqsave(&pc->irq_lock[bank], flags);
 	bcm2835_gpio_irq_config(pc, gpio, false);
+	/* Clear events that were latched prior to clearing event sources */
+	bcm2835_gpio_set_bit(pc, GPEDS0, gpio);
 	clear_bit(offset, &pc->enabled_irq_map[bank]);
 	spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
 }

drivers/pinctrl/freescale/pinctrl-imx1-core.c

@@ -403,14 +403,13 @@ static int imx1_pinconf_set(struct pinctrl_dev *pctldev,
 			     unsigned num_configs)
 {
 	struct imx1_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev);
-	const struct imx1_pinctrl_soc_info *info = ipctl->info;
 	int i;
 
 	for (i = 0; i != num_configs; ++i) {
 		imx1_write_bit(ipctl, pin_id, configs[i] & 0x01, MX1_PUEN);
 
 		dev_dbg(ipctl->dev, "pinconf set pullup pin %s\n",
-			info->pins[pin_id].name);
+			pin_desc_get(pctldev, pin_id)->name);
 	}
 
 	return 0;

drivers/pinctrl/nomadik/pinctrl-abx500.c

@@ -787,7 +787,6 @@ static const struct pinmux_ops abx500_pinmux_ops = {
 	.set_mux = abx500_pmx_set,
 	.gpio_request_enable = abx500_gpio_request_enable,
 	.gpio_disable_free = abx500_gpio_disable_free,
-	.strict = true,
 };
 
 static int abx500_get_groups_cnt(struct pinctrl_dev *pctldev)

drivers/pinctrl/pinctrl-lpc18xx.c

@@ -823,7 +823,7 @@ static int lpc18xx_pconf_set_i2c0(struct pinctrl_dev *pctldev,
 		break;
 
 	case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
-		if (param)
+		if (param_val)
 			*reg &= ~(LPC18XX_SCU_I2C0_ZIF << shift);
 		else
 			*reg |= (LPC18XX_SCU_I2C0_ZIF << shift);
@@ -876,7 +876,7 @@ static int lpc18xx_pconf_set_pin(struct pinctrl_dev *pctldev,
 		break;
 
 	case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
-		if (param)
+		if (param_val)
 			*reg &= ~LPC18XX_SCU_PIN_ZIF;
 		else
 			*reg |= LPC18XX_SCU_PIN_ZIF;

drivers/pinctrl/pinctrl-single.c

@@ -1760,7 +1760,8 @@ static int pcs_irq_init_chained_handler(struct pcs_device *pcs,
 		int res;
 
 		res = request_irq(pcs_soc->irq, pcs_irq_handler,
-				  IRQF_SHARED | IRQF_NO_SUSPEND,
+				  IRQF_SHARED | IRQF_NO_SUSPEND |
+				  IRQF_NO_THREAD,
 				  name, pcs_soc);
 		if (res) {
 			pcs_soc->irq = -1;

drivers/pinctrl/samsung/pinctrl-samsung.c

@@ -33,11 +33,6 @@
 #include "../core.h"
 #include "pinctrl-samsung.h"
 
-#define GROUP_SUFFIX		"-grp"
-#define GSUFFIX_LEN		sizeof(GROUP_SUFFIX)
-#define FUNCTION_SUFFIX		"-mux"
-#define FSUFFIX_LEN		sizeof(FUNCTION_SUFFIX)
-
 /* list of all possible config options supported */
 static struct pin_config {
 	const char *property;

drivers/pinctrl/sh-pfc/sh_pfc.h

@@ -224,7 +224,7 @@ struct sh_pfc_soc_info {
 
 /* PINMUX_GPIO_GP_ALL - Expand to a list of sh_pfc_pin entries */
 #define _GP_GPIO(bank, _pin, _name, sfx)				\
-	[(bank * 32) + _pin] = {					\
+	{								\
 		.pin = (bank * 32) + _pin,				\
 		.name = __stringify(_name),				\
 		.enum_id = _name##_DATA,				\