mirror of
https://github.com/FEX-Emu/linux.git
synced 2025-01-16 06:31:46 +00:00
Merge remote-tracking branch 'regulator/topic/lp872x' into regulator-next
This commit is contained in:
Mark Brown
commit
7455c7f4ac
160
Documentation/devicetree/bindings/regulator/lp872x.txt
Normal file
160
Documentation/devicetree/bindings/regulator/lp872x.txt
Normal file
@ -0,0 +1,160 @@
|
||||
Binding for TI/National Semiconductor LP872x Driver
|
||||
|
||||
Required properties:
|
||||
- compatible: "ti,lp8720" or "ti,lp8725"
|
||||
- reg: I2C slave address. 0x7d = LP8720, 0x7a = LP8725
|
||||
|
||||
Optional properties:
|
||||
- ti,general-config: the value of LP872X_GENERAL_CFG register (u8)
|
||||
(LP8720)
|
||||
bit[2]: BUCK output voltage control by external DVS pin or register
|
||||
1 = external pin, 0 = bit7 of register 08h
|
||||
bit[1]: sleep control by external DVS pin or register
|
||||
1 = external pin, 0 = bit6 of register 08h
|
||||
bit[0]: time step unit(usec). 1 = 25, 0 = 50
|
||||
|
||||
(LP8725)
|
||||
bit[7:6]: time step unit(usec). 00 = 32, 01 = 64, 10 = 128, 11 = 256
|
||||
bit[4]: BUCK2 enable control. 1 = enable, 0 = disable
|
||||
bit[3]: BUCK2 output voltage register address. 1 = 0Ah, 0 = 0Bh
|
||||
bit[2]: BUCK1 output voltage control by external DVS pin or register
|
||||
1 = register 08h, 0 = DVS
|
||||
bit[1]: LDO sleep control. 1 = sleep mode, 0 = normal
|
||||
bit[0]: BUCK1 enable control, 1 = enable, 0 = disable
|
||||
|
||||
For more details, please see the datasheet.
|
||||
|
||||
- ti,update-config: define it when LP872X_GENERAL_CFG register should be set
|
||||
- ti,dvs-gpio: GPIO specifier for external DVS pin control of LP872x devices.
|
||||
- ti,dvs-vsel: DVS selector. 0 = SEL_V1, 1 = SEL_V2.
|
||||
- ti,dvs-state: initial DVS pin state. 0 = DVS_LOW, 1 = DVS_HIGH.
|
||||
|
||||
Sub nodes for regulator_init_data
|
||||
LP8720 has maximum 6 nodes. (child name: ldo1 ~ 5 and buck)
|
||||
LP8725 has maximum 9 nodes. (child name: ldo1 ~ 5, lilo1,2 and buck1,2)
|
||||
For more details, please see the following binding document.
|
||||
(Documentation/devicetree/bindings/regulator/regulator.txt)
|
||||
|
||||
Datasheet
|
||||
- LP8720: http://www.ti.com/lit/ds/symlink/lp8720.pdf
|
||||
- LP8725: http://www.ti.com/lit/ds/symlink/lp8725.pdf
|
||||
|
||||
Example 1) LP8720
|
||||
|
||||
lp8720@7d {
|
||||
compatible = "ti,lp8720";
|
||||
reg = <0x7d>;
|
||||
|
||||
/* external DVS pin used, timestep is 25usec */
|
||||
ti,general-config = /bits/ 8 <0x03>;
|
||||
ti,update-config;
|
||||
|
||||
/*
|
||||
* The dvs-gpio depends on the processor environment.
|
||||
* For example, following GPIO specifier means GPIO134 in OMAP4.
|
||||
*/
|
||||
ti,dvs-gpio = <&gpio5 6 0>;
|
||||
ti,dvs-vsel = /bits/ 8 <1>; /* SEL_V2 */
|
||||
ti,dvs-state = /bits/ 8 <1>; /* DVS_HIGH */
|
||||
|
||||
vaf: ldo1 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vmmc: ldo2 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vcam_io: ldo3 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vcam_core: ldo4 {
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vcam: ldo5 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vcc: buck {
|
||||
regulator-name = "VBUCK";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <2300000>;
|
||||
};
|
||||
};
|
||||
|
||||
Example 2) LP8725
|
||||
|
||||
lp8725@7a {
|
||||
compatible = "ti,lp8725";
|
||||
reg = <0x7a>;
|
||||
|
||||
/* Enable BUCK1,2, no DVS, normal LDO mode, timestep is 256usec */
|
||||
ti,general-config = /bits/ 8 <0xdd>;
|
||||
ti,update-config;
|
||||
|
||||
vcam_io: ldo1 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vcam_core: ldo2 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vcam: ldo3 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vcmmb_io: ldo4 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vcmmb_core: ldo5 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vaux1: lilo1 {
|
||||
regulator-name = "VAUX1";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vaux2: lilo2 {
|
||||
regulator-name = "VAUX2";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vcc1: buck1 {
|
||||
regulator-name = "VBUCK1";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-min-microamp = <460000>;
|
||||
regulator-max-microamp = <1370000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vcc2: buck2 {
|
||||
regulator-name = "VBUCK2";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-min-microamp = <460000>;
|
||||
regulator-max-microamp = <1370000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
@ -18,6 +18,9 @@
|
||||
#include <linux/regulator/lp872x.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_gpio.h>
|
||||
#include <linux/regulator/of_regulator.h>
|
||||
|
||||
/* Registers : LP8720/8725 shared */
|
||||
#define LP872X_GENERAL_CFG 0x00
|
||||
@ -723,8 +726,8 @@ static int lp872x_init_dvs(struct lp872x *lp)
|
||||
|
||||
gpio = dvs->gpio;
|
||||
if (!gpio_is_valid(gpio)) {
|
||||
dev_err(lp->dev, "invalid gpio: %d\n", gpio);
|
||||
return -EINVAL;
|
||||
dev_warn(lp->dev, "invalid gpio: %d\n", gpio);
|
||||
goto set_default_dvs_mode;
|
||||
}
|
||||
|
||||
pinstate = dvs->init_state;
|
||||
@ -829,6 +832,103 @@ static const struct regmap_config lp872x_regmap_config = {
|
||||
.max_register = MAX_REGISTERS,
|
||||
};
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
|
||||
#define LP872X_VALID_OPMODE (REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL)
|
||||
|
||||
static struct of_regulator_match lp8720_matches[] = {
|
||||
{ .name = "ldo1", .driver_data = (void *)LP8720_ID_LDO1, },
|
||||
{ .name = "ldo2", .driver_data = (void *)LP8720_ID_LDO2, },
|
||||
{ .name = "ldo3", .driver_data = (void *)LP8720_ID_LDO3, },
|
||||
{ .name = "ldo4", .driver_data = (void *)LP8720_ID_LDO4, },
|
||||
{ .name = "ldo5", .driver_data = (void *)LP8720_ID_LDO5, },
|
||||
{ .name = "buck", .driver_data = (void *)LP8720_ID_BUCK, },
|
||||
};
|
||||
|
||||
static struct of_regulator_match lp8725_matches[] = {
|
||||
{ .name = "ldo1", .driver_data = (void *)LP8725_ID_LDO1, },
|
||||
{ .name = "ldo2", .driver_data = (void *)LP8725_ID_LDO2, },
|
||||
{ .name = "ldo3", .driver_data = (void *)LP8725_ID_LDO3, },
|
||||
{ .name = "ldo4", .driver_data = (void *)LP8725_ID_LDO4, },
|
||||
{ .name = "ldo5", .driver_data = (void *)LP8725_ID_LDO5, },
|
||||
{ .name = "lilo1", .driver_data = (void *)LP8725_ID_LILO1, },
|
||||
{ .name = "lilo2", .driver_data = (void *)LP8725_ID_LILO2, },
|
||||
{ .name = "buck1", .driver_data = (void *)LP8725_ID_BUCK1, },
|
||||
{ .name = "buck2", .driver_data = (void *)LP8725_ID_BUCK2, },
|
||||
};
|
||||
|
||||
static struct lp872x_platform_data
|
||||
*lp872x_populate_pdata_from_dt(struct device *dev, enum lp872x_id which)
|
||||
{
|
||||
struct device_node *np = dev->of_node;
|
||||
struct lp872x_platform_data *pdata;
|
||||
struct of_regulator_match *match;
|
||||
struct regulator_init_data *d;
|
||||
int num_matches;
|
||||
int count;
|
||||
int i;
|
||||
u8 dvs_state;
|
||||
|
||||
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
|
||||
if (!pdata)
|
||||
goto out;
|
||||
|
||||
of_property_read_u8(np, "ti,general-config", &pdata->general_config);
|
||||
if (of_find_property(np, "ti,update-config", NULL))
|
||||
pdata->update_config = true;
|
||||
|
||||
pdata->dvs = devm_kzalloc(dev, sizeof(struct lp872x_dvs), GFP_KERNEL);
|
||||
if (!pdata->dvs)
|
||||
goto out;
|
||||
|
||||
pdata->dvs->gpio = of_get_named_gpio(np, "ti,dvs-gpio", 0);
|
||||
of_property_read_u8(np, "ti,dvs-vsel", (u8 *)&pdata->dvs->vsel);
|
||||
of_property_read_u8(np, "ti,dvs-state", &dvs_state);
|
||||
pdata->dvs->init_state = dvs_state ? DVS_HIGH : DVS_LOW;
|
||||
|
||||
if (of_get_child_count(np) == 0)
|
||||
goto out;
|
||||
|
||||
switch (which) {
|
||||
case LP8720:
|
||||
match = lp8720_matches;
|
||||
num_matches = ARRAY_SIZE(lp8720_matches);
|
||||
break;
|
||||
case LP8725:
|
||||
match = lp8725_matches;
|
||||
num_matches = ARRAY_SIZE(lp8725_matches);
|
||||
break;
|
||||
default:
|
||||
goto out;
|
||||
}
|
||||
|
||||
count = of_regulator_match(dev, np, match, num_matches);
|
||||
if (count <= 0)
|
||||
goto out;
|
||||
|
||||
for (i = 0; i < num_matches; i++) {
|
||||
pdata->regulator_data[i].id = (int)match[i].driver_data;
|
||||
pdata->regulator_data[i].init_data = match[i].init_data;
|
||||
|
||||
/* Operation mode configuration for buck/buck1/buck2 */
|
||||
if (strncmp(match[i].name, "buck", 4))
|
||||
continue;
|
||||
|
||||
d = pdata->regulator_data[i].init_data;
|
||||
d->constraints.valid_modes_mask |= LP872X_VALID_OPMODE;
|
||||
d->constraints.valid_ops_mask |= REGULATOR_CHANGE_MODE;
|
||||
}
|
||||
out:
|
||||
return pdata;
|
||||
}
|
||||
#else
|
||||
static struct lp872x_platform_data
|
||||
*lp872x_populate_pdata_from_dt(struct device *dev, enum lp872x_id which)
|
||||
{
|
||||
return NULL;
|
||||
}
|
||||
#endif
|
||||
|
||||
static int lp872x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
|
||||
{
|
||||
struct lp872x *lp;
|
||||
@ -838,6 +938,10 @@ static int lp872x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
|
||||
[LP8725] = LP8725_NUM_REGULATORS,
|
||||
};
|
||||
|
||||
if (cl->dev.of_node)
|
||||
cl->dev.platform_data = lp872x_populate_pdata_from_dt(&cl->dev,
|
||||
(enum lp872x_id)id->driver_data);
|
||||
|
||||
lp = devm_kzalloc(&cl->dev, sizeof(struct lp872x), GFP_KERNEL);
|
||||
if (!lp)
|
||||
goto err_mem;
|
||||
@ -882,6 +986,13 @@ static int lp872x_remove(struct i2c_client *cl)
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct of_device_id lp872x_dt_ids[] = {
|
||||
{ .compatible = "ti,lp8720", },
|
||||
{ .compatible = "ti,lp8725", },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, lp872x_dt_ids);
|
||||
|
||||
static const struct i2c_device_id lp872x_ids[] = {
|
||||
{"lp8720", LP8720},
|
||||
{"lp8725", LP8725},
|
||||
@ -893,6 +1004,7 @@ static struct i2c_driver lp872x_driver = {
|
||||
.driver = {
|
||||
.name = "lp872x",
|
||||
.owner = THIS_MODULE,
|
||||
.of_match_table = of_match_ptr(lp872x_dt_ids),
|
||||
},
|
||||
.probe = lp872x_probe,
|
||||
.remove = lp872x_remove,
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user