Merge branch 'depends/cleanup' into next/drivers

* depends/cleanup: (375 commits) ARM: at91: fix board-rm9200-dt after sys_timer conversion clocksource: use clockevents_config_and_register() where possible ARM: use clockevents_config_and_register() where possible clockevents: export clockevents_config_and_register for module use timer: vt8500: Move timer code to drivers/clocksource irqchip: Move ARM vic.h to include/linux/irqchip/arm-vic.h ARM: picoxcell: use common irqchip_init function ARM: spear: use common irqchip_init function irqchip: Move ARM VIC to drivers/irqchip ARM: samsung: remove unused tick.h ARM: remove unneeded vic.h includes ARM: remove mach .handle_irq for VIC users ARM: VIC: set handle_arch_irq in VIC initialization ARM: VIC: shrink down vic.h irqchip: Move ARM gic.h to include/linux/irqchip/arm-gic.h ARM: use common irqchip_init for GIC init irqchip: Move ARM GIC to drivers/irqchip ARM: remove mach .handle_irq for GIC users ARM: GIC: set handle_arch_irq in GIC initialization ARM: GIC: remove direct use of gic_raise_softirq ...
2024-12-30 13:38:40 +00:00 · 2013-01-28 13:36:23 -08:00 · 2013-01-28 13:36:23 -08:00 · 7bcdd8d5e3
commit 7bcdd8d5e3
parent 96e61b8e34 f8060f5446
1999 changed files with 9353 additions and 10188 deletions
--- a/Documentation/DocBook/media/v4l/driver.xml
+++ b/Documentation/DocBook/media/v4l/driver.xml
@ -116,7 +116,7 @@ my_suspend              (struct pci_dev *               pci_dev,
 	return 0; /* a negative value on error, 0 on success. */
 }

-static void __devexit
+static void
 my_remove               (struct pci_dev *               pci_dev)
 {
 	my_device *my = pci_get_drvdata (pci_dev);
@ -124,7 +124,7 @@ my_remove               (struct pci_dev *               pci_dev)
 	/* Describe me. */
 }

-static int __devinit
+static int
 my_probe                (struct pci_dev *               pci_dev,
 			 const struct pci_device_id *   pci_id)
 {
@ -157,7 +157,7 @@ my_pci_driver = {
 	.id_table = my_pci_device_ids,

 	.probe    = my_probe,
-	.remove   = __devexit_p (my_remove),
+	.remove   = my_remove,

 	/* Power management functions. */
 	.suspend  = my_suspend,
--- a/Documentation/PCI/pci-iov-howto.txt
+++ b/Documentation/PCI/pci-iov-howto.txt
@ -76,7 +76,7 @@ To notify SR-IOV core of Virtual Function Migration:

 Following piece of code illustrates the usage of the SR-IOV API.

-static int __devinit dev_probe(struct pci_dev *dev, const struct pci_device_id *id)
+static int dev_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	pci_enable_sriov(dev, NR_VIRTFN);

@ -85,7 +85,7 @@ static int __devinit dev_probe(struct pci_dev *dev, const struct pci_device_id *
 	return 0;
 }

-static void __devexit dev_remove(struct pci_dev *dev)
+static void dev_remove(struct pci_dev *dev)
 {
 	pci_disable_sriov(dev);

@ -131,7 +131,7 @@ static struct pci_driver dev_driver = {
 	.name =		"SR-IOV Physical Function driver",
 	.id_table =	dev_id_table,
 	.probe =	dev_probe,
-	.remove =	__devexit_p(dev_remove),
+	.remove =	dev_remove,
 	.suspend =	dev_suspend,
 	.resume =	dev_resume,
 	.shutdown =	dev_shutdown,
--- a/Documentation/PCI/pci.txt
+++ b/Documentation/PCI/pci.txt
@ -183,12 +183,6 @@ Please mark the initialization and cleanup functions where appropriate
 			initializes.
 	__exit		Exit code. Ignored for non-modular drivers.

-
-	__devinit	Device initialization code.
-			Identical to __init if the kernel is not compiled
-			with CONFIG_HOTPLUG, normal function otherwise.
-	__devexit	The same for __exit.
-
 Tips on when/where to use the above attributes:
 	o The module_init()/module_exit() functions (and all
 	  initialization functions called _only_ from these)
@ -196,20 +190,6 @@ Tips on when/where to use the above attributes:

 	o Do not mark the struct pci_driver.

-	o The ID table array should be marked __devinitconst; this is done
-	  automatically if the table is declared with DEFINE_PCI_DEVICE_TABLE().
-
-	o The probe() and remove() functions should be marked __devinit
-	  and __devexit respectively.  All initialization functions
-	  exclusively called by the probe() routine, can be marked __devinit.
-	  Ditto for remove() and __devexit.
-
-	o If mydriver_remove() is marked with __devexit(), then all address
-	  references to mydriver_remove must use __devexit_p(mydriver_remove)
-	  (in the struct pci_driver declaration for example).
-	  __devexit_p() will generate the function name _or_ NULL if the
-	  function will be discarded.  For an example, see drivers/net/tg3.c.
-
 	o Do NOT mark a function if you are not sure which mark to use.
 	  Better to not mark the function than mark the function wrong.

--- a/Documentation/acpi/enumeration.txt
+++ b/Documentation/acpi/enumeration.txt
@ -185,7 +185,7 @@ input driver:
 			.acpi_match_table  ACPI_PTR(mpu3050_acpi_match),
 		},
 		.probe		= mpu3050_probe,
-		.remove		= __devexit_p(mpu3050_remove),
+		.remove		= mpu3050_remove,
 		.id_table	= mpu3050_ids,
 	};

--- a/Documentation/devicetree/bindings/clock/imx23-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx23-clock.txt
@ -60,11 +60,6 @@ clks: clkctrl@80040000 {
 	compatible = "fsl,imx23-clkctrl";
 	reg = <0x80040000 0x2000>;
 	#clock-cells = <1>;
-	clock-output-names =
-		...
-		"uart",		/* 32 */
-		...
-		"end_of_list";
 };

 auart0: serial@8006c000 {
--- a/Documentation/devicetree/bindings/clock/imx25-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx25-clock.txt
@ -146,10 +146,6 @@ clks: ccm@53f80000 {
 	compatible = "fsl,imx25-ccm";
 	reg = <0x53f80000 0x4000>;
 	interrupts = <31>;
-	clock-output-names = ...
-			"uart_ipg",
-			"uart_serial",
-			...;
 };

 uart1: serial@43f90000 {
--- a/Documentation/devicetree/bindings/clock/imx28-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx28-clock.txt
@ -83,11 +83,6 @@ clks: clkctrl@80040000 {
 	compatible = "fsl,imx28-clkctrl";
 	reg = <0x80040000 0x2000>;
 	#clock-cells = <1>;
-	clock-output-names =
-		...
-		"uart",		/* 45 */
-		...
-		"end_of_list";
 };

 auart0: serial@8006a000 {
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
@ -211,10 +211,6 @@ clks: ccm@020c4000 {
 	reg = <0x020c4000 0x4000>;
 	interrupts = <0 87 0x04 0 88 0x04>;
 	#clock-cells = <1>;
-	clock-output-names = ...
-			     "uart_ipg",
-			     "uart_serial",
-			     ...;
 };

 uart1: serial@02020000 {
--- a/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt
@ -1,4 +1,19 @@
-GPIO line that should be set high/low to power off a device
+Driver a GPIO line that can be used to turn the power off.
+
+The driver supports both level triggered and edge triggered power off.
+At driver load time, the driver will request the given gpio line and
+install a pm_power_off handler. If the optional properties 'input' is
+not found, the GPIO line will be driven in the inactive
+state. Otherwise its configured as an input.
+
+When the pm_power_off is called, the gpio is configured as an output,
+and drive active, so triggering a level triggered power off
+condition. This will also cause an inactive->active edge condition, so
+triggering positive edge triggered power off. After a delay of 100ms,
+the GPIO is set to inactive, thus causing an active->inactive edge,
+triggering negative edge triggered power off. After another 100ms
+delay the GPIO is driver active again. If the power is still on and
+the CPU still running after a 3000ms delay, a WARN_ON(1) is emitted.

 Required properties:
 - compatible : should be "gpio-poweroff".
@ -13,10 +28,9 @@ Optional properties:
  property is not specified, the GPIO is initialized as an output in its
  inactive state.

-
 Examples:

 gpio-poweroff {
 	compatible = "gpio-poweroff";
-	gpios = <&gpio 4 0>; /* GPIO 4 Active Low */
+	gpios = <&gpio 4 0>;
 };
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt
@ -0,0 +1,47 @@
+CSR SiRFprimaII pinmux controller
+
+Required properties:
+- compatible	: "sirf,prima2-pinctrl"
+- reg		: Address range of the pinctrl registers
+- interrupts    : Interrupts used by every GPIO group
+- gpio-controller : Indicates this device is a GPIO controller
+- interrupt-controller  : Marks the device node as an interrupt controller
+Optional properties:
+- sirf,pullups : if n-th bit of m-th bank is set, set a pullup on GPIO-n of bank m
+- sirf,pulldowns : if n-th bit of m-th bank is set, set a pulldown on GPIO-n of bank m
+
+Please refer to pinctrl-bindings.txt in this directory for details of the common
+pinctrl bindings used by client devices.
+
+SiRFprimaII's pinmux nodes act as a container for an abitrary number of subnodes.
+Each of these subnodes represents some desired configuration for a group of pins.
+
+Required subnode-properties:
+- sirf,pins : An array of strings. Each string contains the name of a group.
+- sirf,function: A string containing the name of the function to mux to the
+  group.
+
+  Valid values for group and function names can be found from looking at the
+  group and function arrays in driver files:
+  drivers/pinctrl/pinctrl-sirf.c
+
+For example, pinctrl might have subnodes like the following:
+ uart2_pins_a: uart2@0 {
+         uart {
+                 sirf,pins = "uart2grp";
+                 sirf,function = "uart2";
+         };
+ };
+ uart2_noflow_pins_a: uart2@1 {
+         uart {
+                 sirf,pins = "uart2_nostreamctrlgrp";
+                 sirf,function = "uart2_nostreamctrl";
+         };
+ };
+
+For a specific board, if it wants to use uart2 without hardware flow control,
+it can add the following to its board-specific .dts file.
+uart2: uart@0xb0070000 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_noflow_pins_a>;
+}
--- a/Documentation/i2c/instantiating-devices
+++ b/Documentation/i2c/instantiating-devices
@ -91,7 +91,7 @@ Example (from the nxp OHCI driver):

 static const unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };

-static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev)
+static int usb_hcd_nxp_probe(struct platform_device *pdev)
 {
 	(...)
 	struct i2c_adapter *i2c_adap;
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@ -36,7 +36,7 @@ neigh/default/unres_qlen_bytes - INTEGER
 	The maximum number of bytes which may be used by packets
 	queued for each	unresolved address by other network layers.
 	(added in linux 3.3)
-	Seting negative value is meaningless and will retrun error.
+	Setting negative value is meaningless and will return error.
 	Default: 65536 Bytes(64KB)

 neigh/default/unres_qlen - INTEGER
@ -215,7 +215,7 @@ tcp_ecn - INTEGER
 	Possible values are:
 		0 Disable ECN.  Neither initiate nor accept ECN.
 		1 Always request ECN on outgoing connection attempts.
-		2 Enable ECN when requested by incomming connections
+		2 Enable ECN when requested by incoming connections
 		  but do not request ECN on outgoing connections.
 	Default: 2

@ -503,7 +503,7 @@ tcp_fastopen - INTEGER
 tcp_syn_retries - INTEGER
 	Number of times initial SYNs for an active TCP connection attempt
 	will be retransmitted. Should not be higher than 255. Default value
-	is 6, which corresponds to 63seconds till the last restransmission
+	is 6, which corresponds to 63seconds till the last retransmission
 	with the current initial RTO of 1second. With this the final timeout
 	for an active TCP connection attempt will happen after 127seconds.

@ -1331,6 +1331,12 @@ force_tllao - BOOLEAN
 	race condition where the sender deletes the cached link-layer address
 	prior to receiving a response to a previous solicitation."

+ndisc_notify - BOOLEAN
+	Define mode for notification of address and device changes.
+	0 - (default): do nothing
+	1 - Generate unsolicited neighbour advertisements when device is brought
+	    up or hardware address changes.
+
 icmp/*:
 ratelimit - INTEGER
 	Limit the maximal rates for sending ICMPv6 packets.
@ -1530,7 +1536,7 @@ cookie_hmac_alg - STRING
 	* sha1
 	* none
 	Ability to assign md5 or sha1 as the selected alg is predicated on the
-	configuarion of those algorithms at build time (CONFIG_CRYPTO_MD5 and
+	configuration of those algorithms at build time (CONFIG_CRYPTO_MD5 and
 	CONFIG_CRYPTO_SHA1).

 	Default: Dependent on configuration.  MD5 if available, else SHA1 if
@ -1548,7 +1554,7 @@ rcvbuf_policy - INTEGER
 	blocking.

 	1: rcvbuf space is per association
-	0: recbuf space is per socket
+	0: rcvbuf space is per socket

 	Default: 0

--- a/Documentation/power/runtime_pm.txt
+++ b/Documentation/power/runtime_pm.txt
@ -642,12 +642,13 @@ out the following operations:
  * During system suspend it calls pm_runtime_get_noresume() and
    pm_runtime_barrier() for every device right before executing the
    subsystem-level .suspend() callback for it.  In addition to that it calls
-    pm_runtime_disable() for every device right after executing the
-    subsystem-level .suspend() callback for it.
+    __pm_runtime_disable() with 'false' as the second argument for every device
+    right before executing the subsystem-level .suspend_late() callback for it.

  * During system resume it calls pm_runtime_enable() and pm_runtime_put_sync()
-    for every device right before and right after executing the subsystem-level
-    .resume() callback for it, respectively.
+    for every device right after executing the subsystem-level .resume_early()
+    callback and right after executing the subsystem-level .resume() callback
+    for it, respectively.

 7. Generic subsystem callbacks

--- a/Documentation/rpmsg.txt
+++ b/Documentation/rpmsg.txt
@ -236,7 +236,7 @@ static int rpmsg_sample_probe(struct rpmsg_channel *rpdev)
 	return 0;
 }

-static void __devexit rpmsg_sample_remove(struct rpmsg_channel *rpdev)
+static void rpmsg_sample_remove(struct rpmsg_channel *rpdev)
 {
 	dev_info(&rpdev->dev, "rpmsg sample client driver is removed\n");
 }
@ -253,7 +253,7 @@ static struct rpmsg_driver rpmsg_sample_client = {
 	.id_table	= rpmsg_driver_sample_id_table,
 	.probe		= rpmsg_sample_probe,
 	.callback	= rpmsg_sample_cb,
-	.remove		= __devexit_p(rpmsg_sample_remove),
+	.remove		= rpmsg_sample_remove,
 };

 static int __init init(void)
--- a/Documentation/spi/spi-summary
+++ b/Documentation/spi/spi-summary
@ -345,7 +345,7 @@ SPI protocol drivers somewhat resemble platform device drivers:
 		},

 		.probe		= CHIP_probe,
-		.remove		= __devexit_p(CHIP_remove),
+		.remove		= CHIP_remove,
 		.suspend	= CHIP_suspend,
 		.resume		= CHIP_resume,
 	};
@ -355,7 +355,7 @@ device whose board_info gave a modalias of "CHIP".  Your probe() code
 might look like this unless you're creating a device which is managing
 a bus (appearing under /sys/class/spi_master).

-	static int __devinit CHIP_probe(struct spi_device *spi)
+	static int CHIP_probe(struct spi_device *spi)
 	{
 		struct CHIP			*chip;
 		struct CHIP_platform_data	*pdata;
--- a/Documentation/sysctl/kernel.txt
+++ b/Documentation/sysctl/kernel.txt
@ -38,6 +38,7 @@ show up in /proc/sys/kernel:
 - l2cr                        [ PPC only ]
 - modprobe                    ==> Documentation/debugging-modules.txt
 - modules_disabled
+- msg_next_id		      [ sysv ipc ]
 - msgmax
 - msgmnb
 - msgmni
@ -62,7 +63,9 @@ show up in /proc/sys/kernel:
 - rtsig-max
 - rtsig-nr
 - sem
+- sem_next_id		      [ sysv ipc ]
 - sg-big-buff                 [ generic SCSI device (sg) ]
+- shm_next_id		      [ sysv ipc ]
 - shm_rmid_forced
 - shmall
 - shmmax                      [ sysv ipc ]
@ -320,6 +323,22 @@ to false.

 ==============================================================

+msg_next_id, sem_next_id, and shm_next_id:
+
+These three toggles allows to specify desired id for next allocated IPC
+object: message, semaphore or shared memory respectively.
+
+By default they are equal to -1, which means generic allocation logic.
+Possible values to set are in range {0..INT_MAX}.
+
+Notes:
+1) kernel doesn't guarantee, that new object will have desired id. So,
+it's up to userspace, how to handle an object with "wrong" id.
+2) Toggle with non-default value will be set back to -1 by kernel after
+successful IPC object allocation.
+
+==============================================================
+
 nmi_watchdog:

 Enables/Disables the NMI watchdog on x86 systems. When the value is
@ -542,6 +561,19 @@ are doing anyway :)

 ==============================================================

+shmall:
+
+This parameter sets the total amount of shared memory pages that
+can be used system wide. Hence, SHMALL should always be at least
+ceil(shmmax/PAGE_SIZE).
+
+If you are not sure what the default PAGE_SIZE is on your Linux
+system, you can run the following command:
+
+# getconf PAGE_SIZE
+
+==============================================================
+
 shmmax:

 This value can be used to query and set the run time limit
--- a/Documentation/video4linux/v4l2-framework.txt
+++ b/Documentation/video4linux/v4l2-framework.txt
@ -174,8 +174,7 @@ The recommended approach is as follows:

 static atomic_t drv_instance = ATOMIC_INIT(0);

-static int __devinit drv_probe(struct pci_dev *pdev,
-				const struct pci_device_id *pci_id)
+static int drv_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
 {
 	...
 	state->instance = atomic_inc_return(&drv_instance) - 1;
--- a/Documentation/zh_CN/video4linux/v4l2-framework.txt
+++ b/Documentation/zh_CN/video4linux/v4l2-framework.txt
@ -182,8 +182,7 @@ int iterate(void *p)

 static atomic_t drv_instance = ATOMIC_INIT(0);

-static int __devinit drv_probe(struct pci_dev *pdev,
-				const struct pci_device_id *pci_id)
+static int drv_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
 {
 	...
 	state->instance = atomic_inc_return(&drv_instance) - 1;
--- a/210
+++ b/210
@ -449,6 +449,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
 S:	Maintained
 F:	drivers/char/agp/
 F:	include/linux/agp*
+F:	include/uapi/linux/agp*

 AHA152X SCSI DRIVER
 M:	"Juergen E. Fischer" <fischer@norbit.de>
@ -589,6 +590,7 @@ M:	Jiri Kosina <jkosina@suse.cz>
 S:	Odd fixes
 F:	arch/x86/kernel/apm_32.c
 F:	include/linux/apm_bios.h
+F:	include/uapi/linux/apm_bios.h
 F:	drivers/char/apm-emulation.c

 APPLE BCM5974 MULTITOUCH DRIVER
@ -1005,7 +1007,6 @@ F:	drivers/mmc/host/msm_sdcc.c
 F:	drivers/mmc/host/msm_sdcc.h
 F:	drivers/tty/serial/msm_serial.h
 F:	drivers/tty/serial/msm_serial.c
-F:	drivers/platform/msm/
 F:	drivers/*/pm8???-*
 F:	include/linux/mfd/pm8xxx/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git
@ -1069,7 +1070,6 @@ M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.arm.linux.org.uk/
 S:	Maintained
-F:	arch/arm/common/time-acorn.c
 F:	arch/arm/include/asm/hardware/entry-macro-iomd.S
 F:	arch/arm/include/asm/hardware/ioc.h
 F:	arch/arm/include/asm/hardware/iomd.h
@ -1094,7 +1094,6 @@ W:	http://www.fluff.org/ben/linux/
 S:	Maintained
 F:	arch/arm/plat-samsung/
 F:	arch/arm/plat-s3c24xx/
-F:	arch/arm/plat-s5p/
 F:	arch/arm/mach-s3c24*/
 F:	arch/arm/mach-s3c64xx/
 F:	drivers/*/*s3c2410*
@ -1125,7 +1124,6 @@ M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
 L:	linux-arm-kernel@lists.infradead.org
 L:	linux-media@vger.kernel.org
 S:	Maintained
-F:	arch/arm/plat-s5p/dev-fimc*
 F:	arch/arm/plat-samsung/include/plat/*fimc*
 F:	drivers/media/platform/s5p-fimc/

@ -1136,7 +1134,7 @@ M:	Jeongtae Park <jtp.park@samsung.com>
 L:	linux-arm-kernel@lists.infradead.org
 L:	linux-media@vger.kernel.org
 S:	Maintained
-F:	arch/arm/plat-s5p/dev-mfc.c
+F:	arch/arm/plat-samsung/s5p-dev-mfc.c
 F:	drivers/media/platform/s5p-mfc/

 ARM/SAMSUNG S5P SERIES TV SUBSYSTEM SUPPORT
@ -1254,7 +1252,7 @@ F:	drivers/video/vt8500lcdfb.*
 F:	drivers/video/wm8505fb*
 F:	drivers/video/wmt_ge_rops.*
 F:	drivers/tty/serial/vt8500_serial.c
-F:	drivers/rtc/rtc-vt8500-c
+F:	drivers/rtc/rtc-vt8500.c
 F:	drivers/mmc/host/wmt-sdmmc.c

 ARM/ZIPIT Z2 SUPPORT
@ -1388,6 +1386,7 @@ W:	http://linux-atm.sourceforge.net
 S:	Maintained
 F:	drivers/atm/
 F:	include/linux/atm*
+F:	include/uapi/linux/atm*

 ATMEL AT91 / AT32 MCI DRIVER
 M:	Ludovic Desroches <ludovic.desroches@atmel.com>
@ -1406,13 +1405,13 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 F:	drivers/dma/at_hdmac.c
 F:	drivers/dma/at_hdmac_regs.h
-F:	arch/arm/mach-at91/include/mach/at_hdmac.h
+F:	include/linux/platform_data/dma-atmel.h

 ATMEL ISI DRIVER
 M:	Josh Wu <josh.wu@atmel.com>
 L:	linux-media@vger.kernel.org
 S:	Supported
-F:	drivers/media/platform/atmel-isi.c
+F:	drivers/media/platform/soc_camera/atmel-isi.c
 F:	include/media/atmel-isi.h

 ATMEL LCDFB DRIVER
@ -1467,6 +1466,7 @@ W:	http://people.redhat.com/sgrubb/audit/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current.git
 S:	Maintained
 F:	include/linux/audit.h
+F:	include/uapi/linux/audit.h
 F:	kernel/audit*

 AUXILIARY DISPLAY DRIVERS
@ -1497,7 +1497,7 @@ M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-hams@vger.kernel.org
 W:	http://www.linux-ax25.org/
 S:	Maintained
-F:	include/linux/ax25.h
+F:	include/uapi/linux/ax25.h
 F:	include/net/ax25.h
 F:	net/ax25/

@ -1558,7 +1558,7 @@ M:	"Tigran A. Aivazian" <tigran@aivazian.fsnet.co.uk>
 S:	Maintained
 F:	Documentation/filesystems/bfs.txt
 F:	fs/bfs/
-F:	include/linux/bfs_fs.h
+F:	include/uapi/linux/bfs_fs.h

 BLACKFIN ARCHITECTURE
 M:	Mike Frysinger <vapier@gentoo.org>
@ -1655,7 +1655,7 @@ L:	netdev@vger.kernel.org
 W:	http://sourceforge.net/projects/bonding/
 S:	Supported
 F:	drivers/net/bonding/
-F:	include/linux/if_bonding.h
+F:	include/uapi/linux/if_bonding.h

 BROADCOM B44 10/100 ETHERNET DRIVER
 M:	Gary Zambrano <zambrano@broadcom.com>
@ -1734,6 +1734,7 @@ L:	linux-scsi@vger.kernel.org
 S:	Supported
 F:	block/bsg.c
 F:	include/linux/bsg.h
+F:	include/uapi/linux/bsg.h

 BT87X AUDIO DRIVER
 M:	Clemens Ladisch <clemens@ladisch.de>
@ -1804,7 +1805,7 @@ L:	netdev@vger.kernel.org
 S:	Supported
 F:	Documentation/networking/caif/
 F:	drivers/net/caif/
-F:	include/linux/caif/
+F:	include/uapi/linux/caif/
 F:	include/net/caif/
 F:	net/caif/

@ -1825,11 +1826,11 @@ W:	http://gitorious.org/linux-can
 T:	git git://gitorious.org/linux-can/linux-can-next.git
 S:	Maintained
 F:	net/can/
-F:	include/linux/can.h
 F:	include/linux/can/core.h
-F:	include/linux/can/bcm.h
-F:	include/linux/can/raw.h
-F:	include/linux/can/gw.h
+F:	include/uapi/linux/can.h
+F:	include/uapi/linux/can/bcm.h
+F:	include/uapi/linux/can/raw.h
+F:	include/uapi/linux/can/gw.h

 CAN NETWORK DRIVERS
 M:	Wolfgang Grandegger <wg@grandegger.com>
@ -1840,15 +1841,16 @@ T:	git git://gitorious.org/linux-can/linux-can-next.git
 S:	Maintained
 F:	drivers/net/can/
 F:	include/linux/can/dev.h
-F:	include/linux/can/error.h
-F:	include/linux/can/netlink.h
 F:	include/linux/can/platform/
+F:	include/uapi/linux/can/error.h
+F:	include/uapi/linux/can/netlink.h

 CAPABILITIES
 M:	Serge Hallyn <serge.hallyn@canonical.com>
 L:	linux-security-module@vger.kernel.org
 S:	Supported
 F:	include/linux/capability.h
+F:	include/uapi/linux/capability.h
 F:	security/capability.c
 F:	security/commoncap.c
 F:	kernel/capability.c
@ -1861,6 +1863,7 @@ W:	http://www.ibm.com/developerworks/power/cell/
 S:	Supported
 F:	arch/powerpc/include/asm/cell*.h
 F:	arch/powerpc/include/asm/spu*.h
+F:	arch/powerpc/include/uapi/asm/spu*.h
 F:	arch/powerpc/oprofile/*cell*
 F:	arch/powerpc/platforms/cell/

@ -1909,7 +1912,7 @@ W:	http://wireless.kernel.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
 S:	Maintained
-F:	include/linux/nl80211.h
+F:	include/uapi/linux/nl80211.h
 F:	include/net/cfg80211.h
 F:	net/wireless/*
 X:	net/wireless/wext*
@ -2012,6 +2015,7 @@ S:	Maintained
 F:	Documentation/filesystems/coda.txt
 F:	fs/coda/
 F:	include/linux/coda*.h
+F:	include/uapi/linux/coda*.h

 COMMON CLK FRAMEWORK
 M:	Mike Turquette <mturquette@linaro.org>
@ -2266,6 +2270,7 @@ W:	http://www.cyclades.com/
 S:	Orphan
 F:	drivers/tty/cyclades.c
 F:	include/linux/cyclades.h
+F:	include/uapi/linux/cyclades.h

 CYCLADES PC300 DRIVER
 W:	http://www.cyclades.com/
@ -2323,6 +2328,7 @@ L:	dccp@vger.kernel.org
 W:	http://www.linuxfoundation.org/collaborate/workgroups/networking/dccp
 S:	Maintained
 F:	include/linux/dccp.h
+F:	include/uapi/linux/dccp.h
 F:	include/linux/tfrc.h
 F:	net/dccp/

@ -2349,7 +2355,7 @@ M:	Massimo Dal Zotto <dz@debian.org>
 W:	http://www.debian.org/~dz/i8k/
 S:	Maintained
 F:	drivers/char/i8k.c
-F:	include/linux/i8k.h
+F:	include/uapi/linux/i8k.h

 DELL SYSTEMS MANAGEMENT BASE DRIVER (dcdbas)
 M:	Doug Warzecha <Douglas_Warzecha@dell.com>
@ -2422,6 +2428,7 @@ S:	Maintained
 F:	Documentation/filesystems/quota.txt
 F:	fs/quota/
 F:	include/linux/quota*.h
+F:	include/uapi/linux/quota*.h

 DISPLAYLINK USB 2.0 FRAMEBUFFER DRIVER (UDLFB)
 M:	Bernie Thompson <bernie@plugable.com>
@ -2528,6 +2535,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
 S:	Maintained
 F:	drivers/gpu/drm/
 F:	include/drm/
+F:	include/uapi/drm/

 INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets)
 M:	Daniel Vetter <daniel.vetter@ffwll.ch>
@ -2537,6 +2545,7 @@ T:	git git://people.freedesktop.org/~danvet/drm-intel
 S:	Supported
 F:	drivers/gpu/drm/i915
 F:	include/drm/i915*
+F:	include/uapi/drm/i915*

 DRM DRIVERS FOR EXYNOS
 M:	Inki Dae <inki.dae@samsung.com>
@ -2548,6 +2557,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos.git
 S:	Supported
 F:	drivers/gpu/drm/exynos
 F:	include/drm/exynos*
+F:	include/uapi/drm/exynos*

 DRM DRIVERS FOR NVIDIA TEGRA
 M:	Thierry Reding <thierry.reding@avionic-design.de>
@ -2622,7 +2632,7 @@ W:	http://github.com/mkrufky
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
-F:	drivers/media/usb/dvb-usb-v2/cxusb*
+F:	drivers/media/usb/dvb-usb/cxusb*

 DVB_USB_CYPRESS_FIRMWARE MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
@ -2722,6 +2732,7 @@ L:	netfilter-devel@vger.kernel.org
 W:	http://ebtables.sourceforge.net/
 S:	Maintained
 F:	include/linux/netfilter_bridge/ebt_*.h
+F:	include/uapi/linux/netfilter_bridge/ebt_*.h
 F:	net/bridge/netfilter/ebt*.c

 EC100 MEDIA DRIVER
@ -2933,12 +2944,6 @@ M:	Maxim Levitsky <maximlevitsky@gmail.com>
 S:	Maintained
 F:	drivers/media/rc/ene_ir.*

-EPSON 1355 FRAMEBUFFER DRIVER
-M:	Christopher Hoover <ch@murgatroid.com>
-M:	Christopher Hoover <ch@hpl.hp.com>
-S:	Maintained
-F:	drivers/video/epson1355fb.c
-
 EPSON S1D13XXX FRAMEBUFFER DRIVER
 M:	Kristoffer Ericson <kristoffer.ericson@gmail.com>
 S:	Maintained
@ -3051,6 +3056,7 @@ M:	Eric Paris <eparis@redhat.com>
 S:	Maintained
 F:	fs/notify/fanotify/
 F:	include/linux/fanotify.h
+F:	include/uapi/linux/fanotify.h

 FARSYNC SYNCHRONOUS DRIVER
 M:	Kevin Curtis <kevin.curtis@farsite.co.uk>
@ -3074,6 +3080,7 @@ F:	drivers/scsi/fcoe/
 F:	include/scsi/fc/
 F:	include/scsi/libfc.h
 F:	include/scsi/libfcoe.h
+F:	include/uapi/scsi/fc/

 FILE LOCKING (flock() and fcntl()/lockf())
 M:	Matthew Wilcox <matthew@wil.cx>
@ -3081,6 +3088,8 @@ L:	linux-fsdevel@vger.kernel.org
 S:	Maintained
 F:	include/linux/fcntl.h
 F:	include/linux/fs.h
+F:	include/uapi/linux/fcntl.h
+F:	include/uapi/linux/fs.h
 F:	fs/fcntl.c
 F:	fs/locks.c

@ -3170,6 +3179,8 @@ F:	Documentation/devicetree/bindings/fb/
 F:	drivers/video/
 F:	include/video/
 F:	include/linux/fb.h
+F:	include/uapi/video/
+F:	include/uapi/linux/fb.h

 FREESCALE DIU FRAMEBUFFER DRIVER
 M:	Timur Tabi <timur@freescale.com>
@ -3196,7 +3207,7 @@ M:	Sascha Hauer <kernel@pengutronix.de>
 L:	linux-fbdev@vger.kernel.org
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	arch/arm/plat-mxc/include/mach/imxfb.h
+F:	include/linux/platform_data/video-imxfb.h
 F:	drivers/video/imxfb.c

 FREESCALE SOC FS_ENET DRIVER
@ -3273,6 +3284,16 @@ F:	Documentation/filesystems/caching/
 F:	fs/fscache/
 F:	include/linux/fscache*.h

+F2FS FILE SYSTEM
+M:	Jaegeuk Kim <jaegeuk.kim@samsung.com>
+L:	linux-f2fs-devel@lists.sourceforge.net
+W:	http://en.wikipedia.org/wiki/F2FS
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs.git
+S:	Maintained
+F:	Documentation/filesystems/f2fs.txt
+F:	fs/f2fs/
+F:	include/linux/f2fs_fs.h
+
 FUJITSU FR-V (FRV) PORT
 M:	David Howells <dhowells@redhat.com>
 S:	Maintained
@ -3304,7 +3325,7 @@ L:	fuse-devel@lists.sourceforge.net
 W:	http://fuse.sourceforge.net/
 S:	Maintained
 F:	fs/fuse/
-F:	include/linux/fuse.h
+F:	include/uapi/linux/fuse.h

 FUTURE DOMAIN TMC-16x0 SCSI DRIVER (16-bit)
 M:	Rik Faith <faith@cs.unc.edu>
@ -3351,6 +3372,7 @@ L:	linux-arch@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git
 S:	Maintained
 F:	include/asm-generic
+F:	include/uapi/asm-generic

 GENERIC UIO DRIVER FOR PCI DEVICES
 M:	"Michael S. Tsirkin" <mst@redhat.com>
@ -3367,7 +3389,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw.git
 S:	Supported
 F:	Documentation/filesystems/gfs2*.txt
 F:	fs/gfs2/
-F:	include/linux/gfs2_ondisk.h
+F:	include/uapi/linux/gfs2_ondisk.h

 GIGASET ISDN DRIVERS
 M:	Hansjoerg Lipp <hjlipp@web.de>
@ -3377,7 +3399,7 @@ W:	http://gigaset307x.sourceforge.net/
 S:	Maintained
 F:	Documentation/isdn/README.gigaset
 F:	drivers/isdn/gigaset/
-F:	include/linux/gigaset_dev.h
+F:	include/uapi/linux/gigaset_dev.h

 GPIO SUBSYSTEM
 M:	Grant Likely <grant.likely@secretlab.ca>
@ -3534,6 +3556,7 @@ S:	Supported
 F:	Documentation/scsi/hpsa.txt
 F:	drivers/scsi/hpsa*.[ch]
 F:	include/linux/cciss*.h
+F:	include/uapi/linux/cciss*.h

 HEWLETT-PACKARD SMART CISS RAID DRIVER (cciss)
 M:	Mike Miller <mike.miller@hp.com>
@ -3542,6 +3565,7 @@ S:	Supported
 F:	Documentation/blockdev/cciss.txt
 F:	drivers/block/cciss*
 F:	include/linux/cciss_ioctl.h
+F:	include/uapi/linux/cciss_ioctl.h

 HFS FILESYSTEM
 L:	linux-fsdevel@vger.kernel.org
@ -3576,6 +3600,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
 S:	Maintained
 F:	drivers/hid/
 F:	include/linux/hid*
+F:	include/uapi/linux/hid*

 HIGH-RESOLUTION TIMERS, CLOCKEVENTS, DYNTICKS
 M:	Thomas Gleixner <tglx@linutronix.de>
@ -3607,7 +3632,7 @@ M:	Jes Sorensen <jes@trained-monkey.org>
 L:	linux-hippi@sunsite.dk
 S:	Maintained
 F:	include/linux/hippidevice.h
-F:	include/linux/if_hippi.h
+F:	include/uapi/linux/if_hippi.h
 F:	net/802/hippi.c
 F:	drivers/net/hippi/

@ -3635,6 +3660,7 @@ S:	Maintained
 F:	Documentation/timers/hpet.txt
 F:	drivers/char/hpet.c
 F:	include/linux/hpet.h
+F:	include/uapi/linux/hpet.h

 HPET:	x86
 M:	"Venkatesh Pallipadi (Venki)" <venki@google.com>
@ -3735,6 +3761,8 @@ F:	Documentation/i2c/
 F:	drivers/i2c/
 F:	include/linux/i2c.h
 F:	include/linux/i2c-*.h
+F:	include/uapi/linux/i2c.h
+F:	include/uapi/linux/i2c-*.h

 I2C-TAOS-EVM DRIVER
 M:	Jean Delvare <khali@linux-fr.org>
@ -3850,7 +3878,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git
 S:	Maintained
 F:	net/ieee802154/
 F:	net/mac802154/
-F:	drivers/ieee802154/
+F:	drivers/net/ieee802154/

 IGUANAWORKS USB IR TRANSCEIVER
 M:	Sean Young <sean@mess.org>
@ -3901,7 +3929,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband.git
 S:	Supported
 F:	Documentation/infiniband/
 F:	drivers/infiniband/
-F:	include/linux/if_infiniband.h
+F:	include/uapi/linux/if_infiniband.h

 INOTIFY
 M:	John McCutchan <john@johnmccutchan.com>
@ -3911,6 +3939,7 @@ S:	Maintained
 F:	Documentation/filesystems/inotify.txt
 F:	fs/notify/inotify/
 F:	include/linux/inotify.h
+F:	include/uapi/linux/inotify.h

 INPUT (KEYBOARD, MOUSE, JOYSTICK, TOUCHSCREEN) DRIVERS
 M:	Dmitry Torokhov <dmitry.torokhov@gmail.com>
@ -3921,6 +3950,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git
 S:	Maintained
 F:	drivers/input/
 F:	include/linux/input.h
+F:	include/uapi/linux/input.h
 F:	include/linux/input/

 INPUT MULTITOUCH (MT) PROTOCOL
@ -3941,7 +3971,6 @@ L:	linux-scsi@vger.kernel.org
 T:	git git://git.code.sf.net/p/intel-sas/isci
 S:	Supported
 F:	drivers/scsi/isci/
-F:	firmware/isci/

 INTEL IDLE DRIVER
 M:	Len Brown <lenb@kernel.org>
@ -4036,12 +4065,6 @@ F:	Documentation/networking/ixgbe.txt
 F:	Documentation/networking/ixgbevf.txt
 F:	drivers/net/ethernet/intel/

-INTEL MRST PMU DRIVER
-M:	Len Brown <len.brown@intel.com>
-L:	linux-pm@vger.kernel.org
-S:	Supported
-F:	arch/x86/platform/mrst/pmu.*
-
 INTEL PRO/WIRELESS 2100, 2200BG, 2915ABG NETWORK CONNECTION SUPPORT
 M:	Stanislav Yakovlev <stas.yakovlev@gmail.com>
 L:	linux-wireless@vger.kernel.org
@ -4070,7 +4093,7 @@ S:	Supported
 W:	http://linuxwimax.org
 F:	Documentation/wimax/README.i2400m
 F:	drivers/net/wimax/i2400m/
-F:	include/linux/wimax/i2400m.h
+F:	include/uapi/linux/wimax/i2400m.h

 INTEL WIRELESS 3945ABG/BG, 4965AGN (iwlegacy)
 M:	Stanislaw Gruszka <sgruszka@redhat.com>
@ -4092,9 +4115,9 @@ INTEL MANAGEMENT ENGINE (mei)
 M:	Tomas Winkler <tomas.winkler@intel.com>
 L:	linux-kernel@vger.kernel.org
 S:	Supported
-F:	include/linux/mei.h
+F:	include/uapi/linux/mei.h
 F:	drivers/misc/mei/*
-F:	Documentation/mei/*
+F:	Documentation/misc-devices/mei/*

 IOC3 ETHERNET DRIVER
 M:	Ralf Baechle <ralf@linux-mips.org>
@ -4134,6 +4157,7 @@ S:	Supported
 F:	Documentation/IPMI.txt
 F:	drivers/char/ipmi/
 F:	include/linux/ipmi*
+F:	include/uapi/linux/ipmi*

 IPS SCSI RAID DRIVER
 M:	Adaptec OEM Raid Solutions <aacraid@adaptec.com>
@ -4151,7 +4175,7 @@ L:	lvs-devel@vger.kernel.org
 S:	Maintained
 F:	Documentation/networking/ipvs-sysctl.txt
 F:	include/net/ip_vs.h
-F:	include/linux/ip_vs.h
+F:	include/uapi/linux/ip_vs.h
 F:	net/netfilter/ipvs/

 IPWIRELESS DRIVER
@ -4164,8 +4188,8 @@ IPX NETWORK LAYER
 M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	include/linux/ipx.h
 F:	include/net/ipx.h
+F:	include/uapi/linux/ipx.h
 F:	net/ipx/

 IRDA SUBSYSTEM
@ -4185,6 +4209,7 @@ M:	Thomas Gleixner <tglx@linutronix.de>
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
 F:	kernel/irq/
+F:	drivers/irqchip/

 IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY)
 M:	Benjamin Herrenschmidt <benh@kernel.crashing.org>
@ -4228,6 +4253,8 @@ F:	Documentation/isdn/
 F:	drivers/isdn/
 F:	include/linux/isdn.h
 F:	include/linux/isdn/
+F:	include/uapi/linux/isdn.h
+F:	include/uapi/linux/isdn/

 ISDN SUBSYSTEM (Eicon active card driver)
 M:	Armin Schindler <mac@melware.de>
@ -4268,7 +4295,7 @@ W:	http://www.ivtvdriver.org
 S:	Maintained
 F:	Documentation/video4linux/*.ivtv
 F:	drivers/media/pci/ivtv/
-F:	include/linux/ivtv*
+F:	include/uapi/linux/ivtv*

 IX2505V MEDIA DRIVER
 M:	Malcolm Priestley <tvboxspy@gmail.com>
@ -4306,7 +4333,7 @@ L:	linux-mtd@lists.infradead.org
 W:	http://www.linux-mtd.infradead.org/doc/jffs2.html
 S:	Maintained
 F:	fs/jffs2/
-F:	include/linux/jffs2.h
+F:	include/uapi/linux/jffs2.h

 JOURNALLING LAYER FOR BLOCK DEVICES (JBD)
 M:	Andrew Morton <akpm@linux-foundation.org>
@ -4389,11 +4416,13 @@ W:	http://nfs.sourceforge.net/
 S:	Supported
 F:	fs/nfsd/
 F:	include/linux/nfsd/
+F:	include/uapi/linux/nfsd/
 F:	fs/lockd/
 F:	fs/nfs_common/
 F:	net/sunrpc/
 F:	include/linux/lockd/
 F:	include/linux/sunrpc/
+F:	include/uapi/linux/sunrpc/

 KERNEL VIRTUAL MACHINE (KVM)
 M:	Marcelo Tosatti <mtosatti@redhat.com>
@ -4405,6 +4434,7 @@ F:	Documentation/*/kvm.txt
 F:	arch/*/kvm/
 F:	arch/*/include/asm/kvm*
 F:	include/linux/kvm*
+F:	include/uapi/linux/kvm*
 F:	virt/kvm/

 KERNEL VIRTUAL MACHINE (KVM) FOR AMD-V
@ -4451,6 +4481,7 @@ W:	http://kernel.org/pub/linux/utils/kernel/kexec/
 L:	kexec@lists.infradead.org
 S:	Maintained
 F:	include/linux/kexec.h
+F:	include/uapi/linux/kexec.h
 F:	kernel/kexec.c

 KEYS/KEYRINGS:
@ -4692,6 +4723,7 @@ LLC (802.2)
 M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
 S:	Maintained
 F:	include/linux/llc.h
+F:	include/uapi/linux/llc.h
 F:	include/net/llc*
 F:	net/llc/

@ -4912,7 +4944,7 @@ MATROX FRAMEBUFFER DRIVER
 L:	linux-fbdev@vger.kernel.org
 S:	Orphan
 F:	drivers/video/matrox/matroxfb_*
-F:	include/linux/matroxfb.h
+F:	include/uapi/linux/matroxfb.h

 MAX16065 HARDWARE MONITOR DRIVER
 M:	Guenter Roeck <linux@roeck-us.net>
@ -4994,7 +5026,7 @@ T:	git git://git.infradead.org/mtd-2.6.git
 S:	Maintained
 F:	drivers/mtd/
 F:	include/linux/mtd/
-F:	include/mtd/
+F:	include/uapi/mtd/

 MICROBLAZE ARCHITECTURE
 M:	Michal Simek <monstr@monstr.eu>
@ -5032,12 +5064,6 @@ F:	Documentation/video4linux/meye.txt
 F:	drivers/media/pci/meye/
 F:	include/uapi/linux/meye.h

-MOTOROLA IMX MMC/SD HOST CONTROLLER INTERFACE DRIVER
-M:	Pavel Pisa <ppisa@pikron.com>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
-F:	drivers/mmc/host/imxmmc.*
-
 MOXA SMARTIO/INDUSTIO/INTELLIO SERIAL CARD
 M:	Jiri Slaby <jirislaby@gmail.com>
 S:	Maintained
@ -5076,6 +5102,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc.git
 S:	Maintained
 F:	drivers/mmc/
 F:	include/linux/mmc/
+F:	include/uapi/linux/mmc/

 MULTIMEDIA CARD (MMC) ETC. OVER SPI
 S:	Orphan
@ -5176,6 +5203,8 @@ S:	Supported
 F:	include/linux/netfilter*
 F:	include/linux/netfilter/
 F:	include/net/netfilter/
+F:	include/uapi/linux/netfilter*
+F:	include/uapi/linux/netfilter/
 F:	net/*/netfilter.c
 F:	net/*/netfilter/
 F:	net/netfilter/
@ -5194,8 +5223,8 @@ M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-hams@vger.kernel.org
 W:	http://www.linux-ax25.org/
 S:	Maintained
-F:	include/linux/netrom.h
 F:	include/net/netrom.h
+F:	include/uapi/linux/netrom.h
 F:	net/netrom/

 NETWORK BLOCK DEVICE (NBD)
@ -5204,6 +5233,7 @@ S:	Maintained
 F:	Documentation/blockdev/nbd.txt
 F:	drivers/block/nbd.c
 F:	include/linux/nbd.h
+F:	include/uapi/linux/nbd.h

 NETWORK DROP MONITOR
 M:	Neil Horman <nhorman@tuxdriver.com>
@ -5225,6 +5255,9 @@ F:	include/net/
 F:	include/linux/in.h
 F:	include/linux/net.h
 F:	include/linux/netdevice.h
+F:	include/uapi/linux/in.h
+F:	include/uapi/linux/net.h
+F:	include/uapi/linux/netdevice.h

 NETWORKING [IPv4/IPv6]
 M:	"David S. Miller" <davem@davemloft.net>
@ -5270,6 +5303,7 @@ F:	net/rfkill/
 F:	net/wireless/
 F:	include/net/ieee80211*
 F:	include/linux/wireless.h
+F:	include/uapi/linux/wireless.h
 F:	include/net/iw_handler.h
 F:	drivers/net/wireless/

@ -5289,6 +5323,8 @@ F:	include/linux/fcdevice.h
 F:	include/linux/fddidevice.h
 F:	include/linux/hippidevice.h
 F:	include/linux/inetdevice.h
+F:	include/uapi/linux/if_*
+F:	include/uapi/linux/netdevice.h

 NETXEN (1/10) GbE SUPPORT
 M:	Sony Chacko <sony.chacko@qlogic.com>
@ -5306,8 +5342,8 @@ L:	linux-wireless@vger.kernel.org
 L:	linux-nfc@lists.01.org (moderated for non-subscribers)
 S:	Maintained
 F:	net/nfc/
-F:	include/linux/nfc.h
 F:	include/net/nfc/
+F:	include/uapi/linux/nfc.h
 F:	drivers/nfc/
 F:	include/linux/platform_data/pn544.h

@ -5324,6 +5360,8 @@ F:	net/sunrpc/
 F:	include/linux/lockd/
 F:	include/linux/nfs*
 F:	include/linux/sunrpc/
+F:	include/uapi/linux/nfs*
+F:	include/uapi/linux/sunrpc/

 NI5010 NETWORK DRIVER
 M:	Jan-Pascal van Best <janpascal@vanbest.org>
@ -5513,6 +5551,7 @@ M:	Harald Welte <laforge@gnumonks.org>
 S:	Maintained
 F:	drivers/char/pcmcia/cm4000_cs.c
 F:	include/linux/cm4000_cs.h
+F:	include/uapi/linux/cm4000_cs.h

 OMNIKEY CARDMAN 4040 DRIVER
 M:	Harald Welte <laforge@gnumonks.org>
@ -5671,7 +5710,7 @@ S:	Orphan
 F:	drivers/parport/
 F:	include/linux/parport*.h
 F:	drivers/char/ppdev.c
-F:	include/linux/ppdev.h
+F:	include/uapi/linux/ppdev.h

 PARAVIRT_OPS INTERFACE
 M:	Jeremy Fitzhardinge <jeremy@goop.org>
@ -5812,11 +5851,11 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core
 S:	Supported
 F:	kernel/events/*
 F:	include/linux/perf_event.h
+F:	include/uapi/linux/perf_event.h
 F:	arch/*/kernel/perf_event*.c
 F:	arch/*/kernel/*/perf_event*.c
 F:	arch/*/kernel/*/*/perf_event*.c
 F:	arch/*/include/asm/perf_event.h
-F:	arch/*/lib/perf_event*.c
 F:	arch/*/kernel/perf_callchain.c
 F:	tools/perf/

@ -5825,6 +5864,7 @@ M:	Christoph Hellwig <hch@infradead.org>
 L:	linux-abi-devel@lists.sourceforge.net
 S:	Maintained
 F:	include/linux/personality.h
+F:	include/uapi/linux/personality.h

 PHONET PROTOCOL
 M:	Remi Denis-Courmont <courmisch@gmail.com>
@ -5832,6 +5872,7 @@ S:	Supported
 F:	Documentation/networking/phonet.txt
 F:	include/linux/phonet.h
 F:	include/net/phonet/
+F:	include/uapi/linux/phonet.h
 F:	net/phonet/

 PHRAM MTD DRIVER
@ -5880,6 +5921,7 @@ M:	Jiri Kosina <jkosina@suse.cz>
 S:	Maintained
 F:	drivers/block/pktcdvd.c
 F:	include/linux/pktcdvd.h
+F:	include/uapi/linux/pktcdvd.h

 PKUNITY SOC DRIVERS
 M:	Guan Xuetao <gxt@mprc.pku.edu.cn>
@ -5954,7 +5996,7 @@ PPP OVER ATM (RFC 2364)
 M:	Mitchell Blank Jr <mitch@sfgoth.com>
 S:	Maintained
 F:	net/atm/pppoatm.c
-F:	include/linux/atmppp.h
+F:	include/uapi/linux/atmppp.h

 PPP OVER ETHERNET
 M:	Michal Ostrowski <mostrows@earthlink.net>
@ -5967,6 +6009,7 @@ M:	James Chapman <jchapman@katalix.com>
 S:	Maintained
 F:	net/l2tp/l2tp_ppp.c
 F:	include/linux/if_pppol2tp.h
+F:	include/uapi/linux/if_pppol2tp.h

 PPS SUPPORT
 M:	Rodolfo Giometti <giometti@enneenne.com>
@ -6064,6 +6107,7 @@ F:	include/asm-generic/syscall.h
 F:	include/linux/ptrace.h
 F:	include/linux/regset.h
 F:	include/linux/tracehook.h
+F:	include/uapi/linux/ptrace.h
 F:	kernel/ptrace.c

 PVRUSB2 VIDEO4LINUX DRIVER
@ -6092,7 +6136,6 @@ T:	git git://gitorious.org/linux-pwm/linux-pwm.git
 F:	Documentation/pwm.txt
 F:	Documentation/devicetree/bindings/pwm/
 F:	include/linux/pwm.h
-F:	include/linux/of_pwm.h
 F:	drivers/pwm/
 F:	drivers/video/backlight/pwm_bl.c
 F:	include/linux/pwm_backlight.h
@ -6188,8 +6231,8 @@ M:	Anders Larsen <al@alarsen.net>
 W:	http://www.alarsen.net/linux/qnx4fs/
 S:	Maintained
 F:	fs/qnx4/
-F:	include/linux/qnx4_fs.h
-F:	include/linux/qnxtypes.h
+F:	include/uapi/linux/qnx4_fs.h
+F:	include/uapi/linux/qnxtypes.h

 QT1010 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
@ -6223,7 +6266,7 @@ M:	Benjamin Herrenschmidt <benh@kernel.crashing.org>
 L:	linux-fbdev@vger.kernel.org
 S:	Maintained
 F:	drivers/video/aty/radeon*
-F:	include/linux/radeonfb.h
+F:	include/uapi/linux/radeonfb.h

 RADIOSHARK RADIO DRIVER
 M:	Hans de Goede <hdegoede@redhat.com>
@ -6324,6 +6367,7 @@ S:	Maintained
 F:	Documentation/rtc.txt
 F:	drivers/rtc/
 F:	include/linux/rtc.h
+F:	include/uapi/linux/rtc.h

 REISERFS FILE SYSTEM
 L:	reiserfs-devel@vger.kernel.org
@ -6378,8 +6422,8 @@ M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-hams@vger.kernel.org
 W:	http://www.linux-ax25.org/
 S:	Maintained
-F:	include/linux/rose.h
 F:	include/net/rose.h
+F:	include/uapi/linux/rose.h
 F:	net/rose/

 RTL2830 MEDIA DRIVER
@ -6556,6 +6600,8 @@ S:	Supported
 F:	include/linux/clocksource.h
 F:	include/linux/time.h
 F:	include/linux/timex.h
+F:	include/uapi/linux/time.h
+F:	include/uapi/linux/timex.h
 F:	kernel/time/clocksource.c
 F:	kernel/time/time*.c
 F:	kernel/time/ntp.c
@ -6580,6 +6626,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git sched/core
 S:	Maintained
 F:	kernel/sched/
 F:	include/linux/sched.h
+F:	include/uapi/linux/sched.h

 SCORE ARCHITECTURE
 M:	Chen Liqin <liqin.chen@sunplusct.com>
@ -6733,7 +6780,7 @@ SENSABLE PHANTOM
 M:	Jiri Slaby <jirislaby@gmail.com>
 S:	Maintained
 F:	drivers/misc/phantom.c
-F:	include/linux/phantom.h
+F:	include/uapi/linux/phantom.h

 SERIAL ATA (SATA) SUBSYSTEM
 M:	Jeff Garzik <jgarzik@pobox.com>
@ -6991,6 +7038,7 @@ L:	linux-raid@vger.kernel.org
 S:	Supported
 F:	drivers/md/
 F:	include/linux/raid/
+F:	include/uapi/linux/raid/

 SONIC NETWORK DRIVER
 M:	Thomas Bogendoerfer <tsbogend@alpha.franken.de>
@ -7031,6 +7079,7 @@ T:	git git://git.alsa-project.org/alsa-kernel.git
 S:	Maintained
 F:	Documentation/sound/
 F:	include/sound/
+F:	include/uapi/sound/
 F:	sound/

 SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
@ -7131,6 +7180,7 @@ S:	Maintained
 F:	Documentation/spi/
 F:	drivers/spi/
 F:	include/linux/spi/
+F:	include/uapi/linux/spi/

 SPIDERNET NETWORK DRIVER for CELL
 M:	Ishizaki Kou <kou.ishizaki@toshiba.co.jp>
@ -7267,7 +7317,7 @@ F:	drivers/staging/rtl8712/
 STAGING - SILICON MOTION SM7XX FRAME BUFFER DRIVER
 M:	Teddy Wang <teddy.wang@siliconmotion.com.cn>
 S:	Odd Fixes
-F:	drivers/staging/sm7xx/
+F:	drivers/staging/sm7xxfb/

 STAGING - SOFTLOGIC 6x10 MPEG CODEC
 M:	Ben Collins <bcollins@bluecherry.net>
@ -7393,8 +7443,8 @@ TC CLASSIFIER
 M:	Jamal Hadi Salim <jhs@mojatatu.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	include/linux/pkt_cls.h
 F:	include/net/pkt_cls.h
+F:	include/uapi/linux/pkt_cls.h
 F:	net/sched/

 TCP LOW PRIORITY MODULE
@ -7486,6 +7536,7 @@ L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/team/
 F:	include/linux/if_team.h
+F:	include/uapi/linux/if_team.h

 TECHNOTREND USB IR RECEIVER
 M:	Sean Young <sean@mess.org>
@ -7584,7 +7635,7 @@ L:	netdev@vger.kernel.org (core kernel code)
 L:	tipc-discussion@lists.sourceforge.net (user apps, general discussion)
 W:	http://tipc.sourceforge.net/
 S:	Maintained
-F:	include/linux/tipc*.h
+F:	include/uapi/linux/tipc*.h
 F:	net/tipc/

 TILE ARCHITECTURE
@ -7634,6 +7685,7 @@ W:	http://www.buzzard.org.uk/toshiba/
 S:	Maintained
 F:	drivers/char/toshiba.c
 F:	include/linux/toshiba.h
+F:	include/uapi/linux/toshiba.h

 TMIO MMC DRIVER
 M:	Guennadi Liakhovetski <g.liakhovetski@gmx.de>
@ -7701,6 +7753,9 @@ F:	drivers/tty/serial/serial_core.c
 F:	include/linux/serial_core.h
 F:	include/linux/serial.h
 F:	include/linux/tty.h
+F:	include/uapi/linux/serial_core.h
+F:	include/uapi/linux/serial.h
+F:	include/uapi/linux/tty.h

 TUA9001 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
@ -7780,7 +7835,7 @@ M:	David Herrmann <dh.herrmann@googlemail.com>
 L:	linux-input@vger.kernel.org
 S:	Maintained
 F:	drivers/hid/uhid.c
-F:	include/linux/uhid.h
+F:	include/uapi/linux/uhid.h

 ULTRA-WIDEBAND (UWB) SUBSYSTEM:
 L:	linux-usb@vger.kernel.org
@ -7809,6 +7864,7 @@ S:	Maintained
 F:	Documentation/cdrom/
 F:	drivers/cdrom/cdrom.c
 F:	include/linux/cdrom.h
+F:	include/uapi/linux/cdrom.h

 UNIVERSAL FLASH STORAGE HOST CONTROLLER DRIVER
 M:	Vinayak Holikatti <vinholikatti@gmail.com>
@ -7826,7 +7882,7 @@ T:	git git://git.infradead.org/ubi-2.6.git
 S:	Maintained
 F:	drivers/mtd/ubi/
 F:	include/linux/mtd/ubi.h
-F:	include/mtd/ubi-user.h
+F:	include/uapi/mtd/ubi-user.h

 UNSORTED BLOCK IMAGES (UBI) Fastmap
 M:	Richard Weinberger <richard@nod.at>
@ -7860,7 +7916,7 @@ M:	Oliver Neukum <oliver@neukum.org>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/net/usb/cdc_*.c
-F:	include/linux/usb/cdc.h
+F:	include/uapi/linux/usb/cdc.h

 USB CYPRESS C67X00 DRIVER
 M:	Peter Korsgaard <jacmet@sunsite.dk>
@ -8181,6 +8237,7 @@ S:	Maintained
 F:	Documentation/vfio.txt
 F:	drivers/vfio/
 F:	include/linux/vfio.h
+F:	include/uapi/linux/vfio.h

 VIDEOBUF2 FRAMEWORK
 M:	Pawel Osciak <pawel@osciak.com>
@ -8197,6 +8254,7 @@ L:	virtualization@lists.linux-foundation.org
 S:	Maintained
 F:	drivers/char/virtio_console.c
 F:	include/linux/virtio_console.h
+F:	include/uapi/linux/virtio_console.h

 VIRTIO CORE, NET AND BLOCK DRIVERS
 M:	Rusty Russell <rusty@rustcorp.com.au>
@ -8215,7 +8273,7 @@ L:	virtualization@lists.linux-foundation.org
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/vhost/
-F:	include/linux/vhost.h
+F:	include/uapi/linux/vhost.h

 VIA RHINE NETWORK DRIVER
 M:	Roger Luethi <rl@hellgate.ch>
@ -8355,6 +8413,7 @@ S:	Maintained
 F:	Documentation/watchdog/
 F:	drivers/watchdog/
 F:	include/linux/watchdog.h
+F:	include/uapi/linux/watchdog.h

 WD7000 SCSI DRIVER
 M:	Miroslav Zagorac <zaga@fly.cc.fer.hr>
@ -8380,9 +8439,9 @@ L:	wimax@linuxwimax.org
 S:	Supported
 W:	http://linuxwimax.org
 F:	Documentation/wimax/README.wimax
-F:	include/linux/wimax.h
 F:	include/linux/wimax/debug.h
 F:	include/net/wimax.h
+F:	include/uapi/linux/wimax.h
 F:	net/wimax/

 WISTRON LAPTOP BUTTON DRIVER
@ -8500,6 +8559,7 @@ F:	drivers/*/xen-*front.c
 F:	drivers/xen/
 F:	arch/x86/include/asm/xen/
 F:	include/xen/
+F:	include/uapi/xen/

 XEN HYPERVISOR ARM
 M:	Stefano Stabellini <stefano.stabellini@eu.citrix.com>
--- a/2
+++ b/2
@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 8
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Terrified Chipmunk

 # *DOCUMENTATION*
--- a/arch/alpha/include/asm/parport.h
+++ b/arch/alpha/include/asm/parport.h
@ -9,8 +9,8 @@
 #ifndef _ASM_AXP_PARPORT_H
 #define _ASM_AXP_PARPORT_H 1

-static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
-static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
+static int parport_pc_find_isa_ports (int autoirq, int autodma);
+static int parport_pc_find_nonpci_ports (int autoirq, int autodma)
 {
 	return parport_pc_find_isa_ports (autoirq, autodma);
 }
--- a/arch/alpha/kernel/pci.c
+++ b/arch/alpha/kernel/pci.c
@ -59,13 +59,13 @@ struct pci_controller *pci_isa_hose;
 * Quirks.
 */

-static void __devinit quirk_isa_bridge(struct pci_dev *dev)
+static void quirk_isa_bridge(struct pci_dev *dev)
 {
 	dev->class = PCI_CLASS_BRIDGE_ISA << 8;
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82378, quirk_isa_bridge);

-static void __devinit quirk_cypress(struct pci_dev *dev)
+static void quirk_cypress(struct pci_dev *dev)
 {
 	/* The Notorious Cy82C693 chip.  */

@ -104,7 +104,7 @@ static void __devinit quirk_cypress(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, quirk_cypress);

 /* Called for each device after PCI setup is done. */
-static void __devinit pcibios_fixup_final(struct pci_dev *dev)
+static void pcibios_fixup_final(struct pci_dev *dev)
 {
 	unsigned int class = dev->class >> 8;

@ -198,8 +198,7 @@ subsys_initcall(pcibios_init);
 #ifdef ALPHA_RESTORE_SRM_SETUP
 static struct pdev_srm_saved_conf *srm_saved_configs;

-void __devinit
-pdev_save_srm_config(struct pci_dev *dev)
+void pdev_save_srm_config(struct pci_dev *dev)
 {
 	struct pdev_srm_saved_conf *tmp;
 	static int printed = 0;
@ -241,8 +240,7 @@ pci_restore_srm_config(void)
 }
 #endif

-void __devinit
-pcibios_fixup_bus(struct pci_bus *bus)
+void pcibios_fixup_bus(struct pci_bus *bus)
 {
 	struct pci_dev *dev = bus->self;

--- a/arch/alpha/kernel/smp.c
+++ b/arch/alpha/kernel/smp.c
@ -68,7 +68,7 @@ enum ipi_message_type {
 };

 /* Set to a secondary's cpuid when it comes online.  */
-static int smp_secondary_alive __devinitdata = 0;
+static int smp_secondary_alive = 0;

 int smp_num_probed;		/* Internal processor count */
 int smp_num_cpus = 1;		/* Number that came online.  */
@ -172,7 +172,7 @@ smp_callin(void)
 }

 /* Wait until hwrpb->txrdy is clear for cpu.  Return -1 on timeout.  */
-static int __devinit
+static int
 wait_for_txrdy (unsigned long cpumask)
 {
 	unsigned long timeout;
@ -468,7 +468,7 @@ smp_prepare_cpus(unsigned int max_cpus)
 	smp_num_cpus = smp_num_probed;
 }

-void __devinit
+void
 smp_prepare_boot_cpu(void)
 {
 }
--- a/arch/alpha/kernel/sys_titan.c
+++ b/arch/alpha/kernel/sys_titan.c
@ -303,7 +303,7 @@ titan_late_init(void)

 }

-static int __devinit
+static int
 titan_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	u8 intline;
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@ -371,7 +371,6 @@ config ARCH_CNS3XXX
 config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
 	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_USES_GETTIMEOFFSET
 	select AUTO_ZRELADDR
 	select CLKDEV_LOOKUP
 	select COMMON_CLK
@ -1230,6 +1229,7 @@ config ARM_ERRATA_430973
 config ARM_ERRATA_458693
 	bool "ARM errata: Processor deadlock when a false hazard is created"
 	depends on CPU_V7
+	depends on !ARCH_MULTIPLATFORM
 	help
 	  This option enables the workaround for the 458693 Cortex-A8 (r2p0)
 	  erratum. For very specific sequences of memory operations, it is
@ -1243,6 +1243,7 @@ config ARM_ERRATA_458693
 config ARM_ERRATA_460075
 	bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
 	depends on CPU_V7
+	depends on !ARCH_MULTIPLATFORM
 	help
 	  This option enables the workaround for the 460075 Cortex-A8 (r2p0)
 	  erratum. Any asynchronous access to the L2 cache may encounter a
@ -1255,6 +1256,7 @@ config ARM_ERRATA_460075
 config ARM_ERRATA_742230
 	bool "ARM errata: DMB operation may be faulty"
 	depends on CPU_V7 && SMP
+	depends on !ARCH_MULTIPLATFORM
 	help
 	  This option enables the workaround for the 742230 Cortex-A9
 	  (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction
@ -1267,6 +1269,7 @@ config ARM_ERRATA_742230
 config ARM_ERRATA_742231
 	bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
 	depends on CPU_V7 && SMP
+	depends on !ARCH_MULTIPLATFORM
 	help
 	  This option enables the workaround for the 742231 Cortex-A9
 	  (r2p0..r2p2) erratum. Under certain conditions, specific to the
@ -1317,6 +1320,7 @@ config PL310_ERRATA_727915
 config ARM_ERRATA_743622
 	bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
 	depends on CPU_V7
+	depends on !ARCH_MULTIPLATFORM
 	help
 	  This option enables the workaround for the 743622 Cortex-A9
 	  (r2p*) erratum. Under very rare conditions, a faulty
@ -1330,6 +1334,7 @@ config ARM_ERRATA_743622
 config ARM_ERRATA_751472
 	bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
 	depends on CPU_V7
+	depends on !ARCH_MULTIPLATFORM
 	help
 	  This option enables the workaround for the 751472 Cortex-A9 (prior
 	  to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@ -50,17 +50,19 @@
 		ranges;

 		serial@d0012000 {
-				compatible = "ns16550";
+				compatible = "snps,dw-apb-uart";
 				reg = <0xd0012000 0x100>;
 				reg-shift = <2>;
 				interrupts = <41>;
+				reg-io-width = <4>;
 				status = "disabled";
 		};
 		serial@d0012100 {
-				compatible = "ns16550";
+				compatible = "snps,dw-apb-uart";
 				reg = <0xd0012100 0x100>;
 				reg-shift = <2>;
 				interrupts = <42>;
+				reg-io-width = <4>;
 				status = "disabled";
 		};

--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@ -34,7 +34,14 @@
 		reg = <0>;
 		clocks = <&cpuclk 0>;
 	    };
-	}
+
+	    cpu@1 {
+		device_type = "cpu";
+		compatible = "marvell,sheeva-v7";
+		reg = <1>;
+		clocks = <&cpuclk 1>;
+	    };
+	};

 	soc {
 		pinctrl {
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@ -85,5 +85,13 @@
 			#interrupts-cells = <2>;
 			interrupts = <24>;
 		};
+
+		ethernet@d0034000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0xd0034000 0x2500>;
+				interrupts = <14>;
+				clocks = <&gateclk 1>;
+				status = "disabled";
+		};
 	};
 };
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@ -100,5 +100,13 @@
 			#interrupts-cells = <2>;
 			interrupts = <24>;
 		};
+
+		ethernet@d0034000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0xd0034000 0x2500>;
+				interrupts = <14>;
+				clocks = <&gateclk 1>;
+				status = "disabled";
+		};
 	};
 };
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@ -42,17 +42,19 @@

 	soc {
 		serial@d0012200 {
-				compatible = "ns16550";
+				compatible = "snps,dw-apb-uart";
 				reg = <0xd0012200 0x100>;
 				reg-shift = <2>;
 				interrupts = <43>;
+				reg-io-width = <4>;
 				status = "disabled";
 		};
 		serial@d0012300 {
-				compatible = "ns16550";
+				compatible = "snps,dw-apb-uart";
 				reg = <0xd0012300 0x100>;
 				reg-shift = <2>;
 				interrupts = <44>;
+				reg-io-width = <4>;
 				status = "disabled";
 		};

@ -93,14 +95,6 @@
 				status = "disabled";
 		};

-		ethernet@d0034000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0xd0034000 0x2500>;
-				interrupts = <14>;
-				clocks = <&gateclk 1>;
-				status = "disabled";
-		};
-
 		xor@d0060900 {
 			compatible = "marvell,orion-xor";
 			reg = <0xd0060900 0x100
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@ -170,7 +170,9 @@
 			gpio-bank = <8>;
 		};

-		pinctrl {
+		pinctrl@80157000 {
+			// This is actually the PRCMU base address
+			reg = <0x80157000 0x2000>;
 			compatible = "stericsson,nmk_pinctrl";
 		};

--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@ -117,6 +117,7 @@
 		pinctrl: pinctrl@d0200 {
 			compatible = "marvell,dove-pinctrl";
 			reg = <0xd0200 0x10>;
+			clocks = <&gate_clk 22>;
 		};

 		spi0: spi@10600 {
--- a/arch/arm/boot/dts/ecx-2000.dts
+++ b/arch/arm/boot/dts/ecx-2000.dts
@ -32,6 +32,7 @@

 		cpu@0 {
 			compatible = "arm,cortex-a15";
+			device_type = "cpu";
 			reg = <0>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
@ -39,6 +40,7 @@

 		cpu@1 {
 			compatible = "arm,cortex-a15";
+			device_type = "cpu";
 			reg = <1>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
@ -46,6 +48,7 @@

 		cpu@2 {
 			compatible = "arm,cortex-a15";
+			device_type = "cpu";
 			reg = <2>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
@ -53,6 +56,7 @@

 		cpu@3 {
 			compatible = "arm,cortex-a15";
+			device_type = "cpu";
 			reg = <3>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@ -26,7 +26,7 @@
 	};

 	chosen {
-		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
+		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
 	};

 	sdhci@12530000 {
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@ -574,7 +574,7 @@

 	hdmi {
 		compatible = "samsung,exynos5-hdmi";
-		reg = <0x14530000 0x100000>;
+		reg = <0x14530000 0x70000>;
 		interrupts = <0 95 0>;
 	};

--- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
+++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
@ -21,7 +21,7 @@
 	};

 	chosen {
-		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x81000000,8M console=ttySAC2,115200 init=/linuxrc";
+		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x81000000,8M console=ttySAC0,115200 init=/linuxrc";
 	};

 	spi {
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/highbank.dts
@ -30,33 +30,37 @@
 		#address-cells = <1>;
 		#size-cells = <0>;

-		cpu@0 {
+		cpu@900 {
 			compatible = "arm,cortex-a9";
-			reg = <0>;
+			device_type = "cpu";
+			reg = <0x900>;
 			next-level-cache = <&L2>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
 		};

-		cpu@1 {
+		cpu@901 {
 			compatible = "arm,cortex-a9";
-			reg = <1>;
+			device_type = "cpu";
+			reg = <0x901>;
 			next-level-cache = <&L2>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
 		};

-		cpu@2 {
+		cpu@902 {
 			compatible = "arm,cortex-a9";
-			reg = <2>;
+			device_type = "cpu";
+			reg = <0x902>;
 			next-level-cache = <&L2>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
 		};

-		cpu@3 {
+		cpu@903 {
 			compatible = "arm,cortex-a9";
-			reg = <3>;
+			device_type = "cpu";
+			reg = <0x903>;
 			next-level-cache = <&L2>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@ -39,17 +39,17 @@
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
+						0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
 					fsl,pull-up = <0>;
 				};

-				led_pin_gpio0_17: led_gpio0_17@0 {
+				led_pin_gpio2_1: led_gpio2_1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
+						0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@ -110,7 +110,7 @@
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio0_17>;
+		pinctrl-0 = <&led_pin_gpio2_1>;

 		user {
 			label = "green";
--- a/arch/arm/boot/dts/imx31-bug.dts
+++ b/arch/arm/boot/dts/imx31-bug.dts
@ -14,7 +14,7 @@

 / {
 	model = "Buglabs i.MX31 Bug 1.x";
-	compatible = "fsl,imx31-bug", "fsl,imx31";
+	compatible = "buglabs,imx31-bug", "fsl,imx31";

 	memory {
 		reg = <0x80000000 0x8000000>; /* 128M */
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@ -492,7 +492,7 @@
 				compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
 				reg = <0x53fcc000 0x4000>;
 				interrupts = <83>;
-				clocks = <&clks 158>, <&clks 157>;
+				clocks = <&clks 87>, <&clks 86>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
@ -39,6 +39,7 @@
 			#size-cells = <0>;
 			interrupts = <32>;
 			clock-frequency = <100000>;
+			clocks = <&gate_clk 7>;
 			status = "disabled";
 		};
 	};
--- a/arch/arm/boot/dts/kirkwood-topkick.dts
+++ b/arch/arm/boot/dts/kirkwood-topkick.dts
@ -82,4 +82,21 @@
 			gpios = <&gpio1 16 1>;
 		};
 	};
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sata0_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 4 0>;
+		};
+	};
 };
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@ -144,6 +144,7 @@
 			compatible = "marvell,orion-ehci";
 			reg = <0x50000 0x1000>;
 			interrupts = <19>;
+			clocks = <&gate_clk 3>;
 			status = "okay";
 		};

--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@ -1,26 +1,3 @@
-config ARM_GIC
-	bool
-	select IRQ_DOMAIN
-	select MULTI_IRQ_HANDLER
-
-config GIC_NON_BANKED
-	bool
-
-config ARM_VIC
-	bool
-	select IRQ_DOMAIN
-	select MULTI_IRQ_HANDLER
-
-config ARM_VIC_NR
-	int
-	default 4 if ARCH_S5PV210
-	default 3 if ARCH_S5PC100
-	default 2
-	depends on ARM_VIC
-	help
-	  The maximum number of VICs available in the system, for
-	  power management.
-
 config ICST
 	bool

--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@ -2,8 +2,6 @@
 # Makefile for the linux kernel.
 #

-obj-$(CONFIG_ARM_GIC)		+= gic.o
-obj-$(CONFIG_ARM_VIC)		+= vic.o
 obj-$(CONFIG_ICST)		+= icst.o
 obj-$(CONFIG_SA1111)		+= sa1111.o
 obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@ -686,8 +686,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
 *	%-EINVAL	no platform data passed
 *	%0		successful.
 */
-static int __devinit
-__sa1111_probe(struct device *me, struct resource *mem, int irq)
+static int __sa1111_probe(struct device *me, struct resource *mem, int irq)
 {
 	struct sa1111_platform_data *pd = me->platform_data;
 	struct sa1111 *sachip;
@ -1011,7 +1010,7 @@ static int sa1111_resume(struct platform_device *dev)
 #define sa1111_resume  NULL
 #endif

-static int __devinit sa1111_probe(struct platform_device *pdev)
+static int sa1111_probe(struct platform_device *pdev)
 {
 	struct resource *mem;
 	int irq;
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@ -176,7 +176,7 @@ static int scoop_resume(struct platform_device *dev)
 #define scoop_resume	NULL
 #endif

-static int __devinit scoop_probe(struct platform_device *pdev)
+static int scoop_probe(struct platform_device *pdev)
 {
 	struct scoop_dev *devptr;
 	struct scoop_config *inf;
@ -243,7 +243,7 @@ err_ioremap:
 	return ret;
 }

-static int __devexit scoop_remove(struct platform_device *pdev)
+static int scoop_remove(struct platform_device *pdev)
 {
 	struct scoop_dev *sdev = platform_get_drvdata(pdev);
 	int ret;
@ -268,7 +268,7 @@ static int __devexit scoop_remove(struct platform_device *pdev)

 static struct platform_driver scoop_driver = {
 	.probe		= scoop_probe,
-	.remove		= __devexit_p(scoop_remove),
+	.remove		= scoop_remove,
 	.suspend	= scoop_suspend,
 	.resume		= scoop_resume,
 	.driver		= {
--- a/arch/arm/configs/mvebu_defconfig
+++ b/arch/arm/configs/mvebu_defconfig
@ -33,9 +33,7 @@ CONFIG_MVNETA=y
 CONFIG_MARVELL_PHY=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_I2C=y
-CONFIG_I2C_MV64XXX=y
+CONFIG_SERIAL_8250_DW=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_USB_SUPPORT is not set
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@ -12,7 +12,6 @@

 struct tag;
 struct meminfo;
-struct sys_timer;
 struct pt_regs;
 struct smp_operations;
 #ifdef CONFIG_SMP
@ -48,7 +47,7 @@ struct machine_desc {
 	void			(*map_io)(void);/* IO mapping function	*/
 	void			(*init_early)(void);
 	void			(*init_irq)(void);
-	struct sys_timer	*timer;		/* system tick timer	*/
+	void			(*init_time)(void);
 	void			(*init_machine)(void);
 	void			(*init_late)(void);
 #ifdef CONFIG_MULTI_IRQ_HANDLER
--- a/arch/arm/include/asm/mach/irq.h
+++ b/arch/arm/include/asm/mach/irq.h
@ -22,6 +22,7 @@ extern int show_fiq_list(struct seq_file *, int);

 #ifdef CONFIG_MULTI_IRQ_HANDLER
 extern void (*handle_arch_irq)(struct pt_regs *);
+extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
 #endif

 /*
--- a/arch/arm/include/asm/mach/time.h
+++ b/arch/arm/include/asm/mach/time.h
@ -10,36 +10,6 @@
 #ifndef __ASM_ARM_MACH_TIME_H
 #define __ASM_ARM_MACH_TIME_H

-/*
- * This is our kernel timer structure.
- *
- * - init
- *   Initialise the kernels jiffy timer source, claim interrupt
- *   using setup_irq.  This is called early on during initialisation
- *   while interrupts are still disabled on the local CPU.
- * - suspend
- *   Suspend the kernel jiffy timer source, if necessary.  This
- *   is called with interrupts disabled, after all normal devices
- *   have been suspended.  If no action is required, set this to
- *   NULL.
- * - resume
- *   Resume the kernel jiffy timer source, if necessary.  This
- *   is called with interrupts disabled before any normal devices
- *   are resumed.  If no action is required, set this to NULL.
- * - offset
- *   Return the timer offset in microseconds since the last timer
- *   interrupt.  Note: this must take account of any unprocessed
- *   timer interrupt which may be pending.
- */
-struct sys_timer {
-	void			(*init)(void);
-	void			(*suspend)(void);
-	void			(*resume)(void);
-#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
-	unsigned long		(*offset)(void);
-#endif
-};
-
 extern void timer_tick(void);

 struct timespec;
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@ -78,7 +78,7 @@ void pcibios_report_status(u_int status_mask, int warn)
 * Bug 3 is responsible for the sound DMA grinding to a halt.  We now
 * live with bug 2.
 */
-static void __devinit pci_fixup_83c553(struct pci_dev *dev)
+static void pci_fixup_83c553(struct pci_dev *dev)
 {
 	/*
 	 * Set memory region to start at address 0, and enable IO
@ -130,7 +130,7 @@ static void __devinit pci_fixup_83c553(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_83C553, pci_fixup_83c553);

-static void __devinit pci_fixup_unassign(struct pci_dev *dev)
+static void pci_fixup_unassign(struct pci_dev *dev)
 {
 	dev->resource[0].end -= dev->resource[0].start;
 	dev->resource[0].start = 0;
@ -142,7 +142,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_WINBOND2, PCI_DEVICE_ID_WINBOND2_89C940F,
 * if it is the host bridge by marking it as such.  These resources are of
 * no consequence to the PCI layer (they are handled elsewhere).
 */
-static void __devinit pci_fixup_dec21285(struct pci_dev *dev)
+static void pci_fixup_dec21285(struct pci_dev *dev)
 {
 	int i;

@ -161,7 +161,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21285, pci_fixup_d
 /*
 * PCI IDE controllers use non-standard I/O port decoding, respect it.
 */
-static void __devinit pci_fixup_ide_bases(struct pci_dev *dev)
+static void pci_fixup_ide_bases(struct pci_dev *dev)
 {
 	struct resource *r;
 	int i;
@ -182,7 +182,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
 /*
 * Put the DEC21142 to sleep
 */
-static void __devinit pci_fixup_dec21142(struct pci_dev *dev)
+static void pci_fixup_dec21142(struct pci_dev *dev)
 {
 	pci_write_config_dword(dev, 0x40, 0x80000000);
 }
@ -204,7 +204,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21142, pci_fixup_d
 * functional.  However, The CY82C693U _does not work_ in bus
 * master mode without locking the PCI bus solid.
 */
-static void __devinit pci_fixup_cy82c693(struct pci_dev *dev)
+static void pci_fixup_cy82c693(struct pci_dev *dev)
 {
 	if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
 		u32 base0, base1;
@ -254,7 +254,7 @@ static void __devinit pci_fixup_cy82c693(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, pci_fixup_cy82c693);

-static void __devinit pci_fixup_it8152(struct pci_dev *dev)
+static void pci_fixup_it8152(struct pci_dev *dev)
 {
 	int i;
 	/* fixup for ITE 8152 devices */
@ -361,9 +361,7 @@ void pcibios_fixup_bus(struct pci_bus *bus)
 	printk(KERN_INFO "PCI: bus%d: Fast back to back transfers %sabled\n",
 		bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis");
 }
-#ifdef CONFIG_HOTPLUG
 EXPORT_SYMBOL(pcibios_fixup_bus);
-#endif

 /*
 * Swizzle the device pin each time we cross a bridge.  If a platform does
@ -380,7 +378,7 @@ EXPORT_SYMBOL(pcibios_fixup_bus);
 * PCI standard swizzle is implemented on plug-in cards and Cardbus based
 * PCI extenders, so it can not be ignored.
 */
-static u8 __devinit pcibios_swizzle(struct pci_dev *dev, u8 *pin)
+static u8 pcibios_swizzle(struct pci_dev *dev, u8 *pin)
 {
 	struct pci_sys_data *sys = dev->sysdata;
 	int slot, oldpin = *pin;
--- a/arch/arm/kernel/etm.c
+++ b/arch/arm/kernel/etm.c
@ -339,7 +339,7 @@ static struct miscdevice etb_miscdev = {
 	.fops = &etb_fops,
 };

-static int __devinit etb_probe(struct amba_device *dev, const struct amba_id *id)
+static int etb_probe(struct amba_device *dev, const struct amba_id *id)
 {
 	struct tracectx *t = &tracer;
 	int ret = 0;
@ -531,7 +531,7 @@ static ssize_t trace_mode_store(struct kobject *kobj,
 static struct kobj_attribute trace_mode_attr =
 	__ATTR(trace_mode, 0644, trace_mode_show, trace_mode_store);

-static int __devinit etm_probe(struct amba_device *dev, const struct amba_id *id)
+static int etm_probe(struct amba_device *dev, const struct amba_id *id)
 {
 	struct tracectx *t = &tracer;
 	int ret = 0;
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@ -117,6 +117,16 @@ void __init init_IRQ(void)
 	machine_desc->init_irq();
 }

+#ifdef CONFIG_MULTI_IRQ_HANDLER
+void __init set_handle_irq(void (*handle_irq)(struct pt_regs *))
+{
+	if (handle_arch_irq)
+		return;
+
+	handle_arch_irq = handle_irq;
+}
+#endif
+
 #ifdef CONFIG_SPARSE_IRQ
 int __init arch_probe_nr_irqs(void)
 {
--- a/arch/arm/kernel/perf_event_cpu.c
+++ b/arch/arm/kernel/perf_event_cpu.c
@ -132,7 +132,7 @@ static int cpu_pmu_request_irq(struct arm_pmu *cpu_pmu, irq_handler_t handler)
 	return 0;
 }

-static void __devinit cpu_pmu_init(struct arm_pmu *cpu_pmu)
+static void cpu_pmu_init(struct arm_pmu *cpu_pmu)
 {
 	int cpu;
 	for_each_possible_cpu(cpu) {
@ -178,7 +178,7 @@ static struct notifier_block __cpuinitdata cpu_pmu_hotplug_notifier = {
 /*
 * PMU platform driver and devicetree bindings.
 */
-static struct of_device_id __devinitdata cpu_pmu_of_device_ids[] = {
+static struct of_device_id cpu_pmu_of_device_ids[] = {
 	{.compatible = "arm,cortex-a15-pmu",	.data = armv7_a15_pmu_init},
 	{.compatible = "arm,cortex-a9-pmu",	.data = armv7_a9_pmu_init},
 	{.compatible = "arm,cortex-a8-pmu",	.data = armv7_a8_pmu_init},
@ -190,7 +190,7 @@ static struct of_device_id __devinitdata cpu_pmu_of_device_ids[] = {
 	{},
 };

-static struct platform_device_id __devinitdata cpu_pmu_plat_device_ids[] = {
+static struct platform_device_id cpu_pmu_plat_device_ids[] = {
 	{.name = "arm-pmu"},
 	{},
 };
@ -198,7 +198,7 @@ static struct platform_device_id __devinitdata cpu_pmu_plat_device_ids[] = {
 /*
 * CPU PMU identification and probing.
 */
-static int __devinit probe_current_pmu(struct arm_pmu *pmu)
+static int probe_current_pmu(struct arm_pmu *pmu)
 {
 	int cpu = get_cpu();
 	unsigned long cpuid = read_cpuid_id();
@ -252,7 +252,7 @@ static int __devinit probe_current_pmu(struct arm_pmu *pmu)
 	return ret;
 }

-static int __devinit cpu_pmu_device_probe(struct platform_device *pdev)
+static int cpu_pmu_device_probe(struct platform_device *pdev)
 {
 	const struct of_device_id *of_id;
 	int (*init_fn)(struct arm_pmu *);
--- a/arch/arm/kernel/perf_event_v6.c
+++ b/arch/arm/kernel/perf_event_v6.c
@ -653,7 +653,7 @@ static int armv6_map_event(struct perf_event *event)
 				&armv6_perf_cache_map, 0xFF);
 }

-static int __devinit armv6pmu_init(struct arm_pmu *cpu_pmu)
+static int armv6pmu_init(struct arm_pmu *cpu_pmu)
 {
 	cpu_pmu->name		= "v6";
 	cpu_pmu->handle_irq	= armv6pmu_handle_irq;
@ -685,7 +685,7 @@ static int armv6mpcore_map_event(struct perf_event *event)
 				&armv6mpcore_perf_cache_map, 0xFF);
 }

-static int __devinit armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu)
+static int armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu)
 {
 	cpu_pmu->name		= "v6mpcore";
 	cpu_pmu->handle_irq	= armv6pmu_handle_irq;
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@ -1226,7 +1226,7 @@ static void armv7pmu_init(struct arm_pmu *cpu_pmu)
 	cpu_pmu->max_period	= (1LLU << 32) - 1;
 };

-static u32 __devinit armv7_read_num_pmnc_events(void)
+static u32 armv7_read_num_pmnc_events(void)
 {
 	u32 nb_cnt;

@ -1237,7 +1237,7 @@ static u32 __devinit armv7_read_num_pmnc_events(void)
 	return nb_cnt + 1;
 }

-static int __devinit armv7_a8_pmu_init(struct arm_pmu *cpu_pmu)
+static int armv7_a8_pmu_init(struct arm_pmu *cpu_pmu)
 {
 	armv7pmu_init(cpu_pmu);
 	cpu_pmu->name		= "ARMv7 Cortex-A8";
@ -1246,7 +1246,7 @@ static int __devinit armv7_a8_pmu_init(struct arm_pmu *cpu_pmu)
 	return 0;
 }

-static int __devinit armv7_a9_pmu_init(struct arm_pmu *cpu_pmu)
+static int armv7_a9_pmu_init(struct arm_pmu *cpu_pmu)
 {
 	armv7pmu_init(cpu_pmu);
 	cpu_pmu->name		= "ARMv7 Cortex-A9";
@ -1255,7 +1255,7 @@ static int __devinit armv7_a9_pmu_init(struct arm_pmu *cpu_pmu)
 	return 0;
 }

-static int __devinit armv7_a5_pmu_init(struct arm_pmu *cpu_pmu)
+static int armv7_a5_pmu_init(struct arm_pmu *cpu_pmu)
 {
 	armv7pmu_init(cpu_pmu);
 	cpu_pmu->name		= "ARMv7 Cortex-A5";
@ -1264,7 +1264,7 @@ static int __devinit armv7_a5_pmu_init(struct arm_pmu *cpu_pmu)
 	return 0;
 }

-static int __devinit armv7_a15_pmu_init(struct arm_pmu *cpu_pmu)
+static int armv7_a15_pmu_init(struct arm_pmu *cpu_pmu)
 {
 	armv7pmu_init(cpu_pmu);
 	cpu_pmu->name		= "ARMv7 Cortex-A15";
@ -1274,7 +1274,7 @@ static int __devinit armv7_a15_pmu_init(struct arm_pmu *cpu_pmu)
 	return 0;
 }

-static int __devinit armv7_a7_pmu_init(struct arm_pmu *cpu_pmu)
+static int armv7_a7_pmu_init(struct arm_pmu *cpu_pmu)
 {
 	armv7pmu_init(cpu_pmu);
 	cpu_pmu->name		= "ARMv7 Cortex-A7";
--- a/arch/arm/kernel/perf_event_xscale.c
+++ b/arch/arm/kernel/perf_event_xscale.c
@ -440,7 +440,7 @@ static int xscale_map_event(struct perf_event *event)
 				&xscale_perf_cache_map, 0xFF);
 }

-static int __devinit xscale1pmu_init(struct arm_pmu *cpu_pmu)
+static int xscale1pmu_init(struct arm_pmu *cpu_pmu)
 {
 	cpu_pmu->name		= "xscale1";
 	cpu_pmu->handle_irq	= xscale1pmu_handle_irq;
@ -810,7 +810,7 @@ static inline void xscale2pmu_write_counter(struct perf_event *event, u32 val)
 	}
 }

-static int __devinit xscale2pmu_init(struct arm_pmu *cpu_pmu)
+static int xscale2pmu_init(struct arm_pmu *cpu_pmu)
 {
 	cpu_pmu->name		= "xscale2";
 	cpu_pmu->handle_irq	= xscale2pmu_handle_irq;
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@ -416,7 +416,8 @@ static void (*smp_cross_call)(const struct cpumask *, unsigned int);

 void __init set_smp_cross_call(void (*fn)(const struct cpumask *, unsigned int))
 {
-	smp_cross_call = fn;
+	if (!smp_cross_call)
+		smp_cross_call = fn;
 }

 void arch_send_call_function_ipi_mask(const struct cpumask *mask)
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@ -24,7 +24,6 @@

 #include <asm/smp_twd.h>
 #include <asm/localtimer.h>
-#include <asm/hardware/gic.h>

 /* set up by the platform code */
 static void __iomem *twd_base;
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@ -21,7 +21,6 @@
 #include <linux/timex.h>
 #include <linux/errno.h>
 #include <linux/profile.h>
-#include <linux/syscore_ops.h>
 #include <linux/timer.h>
 #include <linux/irq.h>

@ -31,11 +30,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>

-/*
- * Our system timer.
- */
-static struct sys_timer *system_timer;
-
 #if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) || \
    defined(CONFIG_NVRAM) || defined(CONFIG_NVRAM_MODULE)
 /* this needs a better home */
@ -69,16 +63,6 @@ unsigned long profile_pc(struct pt_regs *regs)
 EXPORT_SYMBOL(profile_pc);
 #endif

-#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
-u32 arch_gettimeoffset(void)
-{
-	if (system_timer->offset != NULL)
-		return system_timer->offset() * 1000;
-
-	return 0;
-}
-#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */
-
 #ifndef CONFIG_GENERIC_CLOCKEVENTS
 /*
 * Kernel system timer support.
@ -129,43 +113,8 @@ int __init register_persistent_clock(clock_access_fn read_boot,
 	return -EINVAL;
 }

-#if defined(CONFIG_PM) && !defined(CONFIG_GENERIC_CLOCKEVENTS)
-static int timer_suspend(void)
-{
-	if (system_timer->suspend)
-		system_timer->suspend();
-
-	return 0;
-}
-
-static void timer_resume(void)
-{
-	if (system_timer->resume)
-		system_timer->resume();
-}
-#else
-#define timer_suspend NULL
-#define timer_resume NULL
-#endif
-
-static struct syscore_ops timer_syscore_ops = {
-	.suspend	= timer_suspend,
-	.resume		= timer_resume,
-};
-
-static int __init timer_init_syscore_ops(void)
-{
-	register_syscore_ops(&timer_syscore_ops);
-
-	return 0;
-}
-
-device_initcall(timer_init_syscore_ops);
-
 void __init time_init(void)
 {
-	system_timer = machine_desc->timer;
-	system_timer->init();
+	machine_desc->init_time();
 	sched_clock_postinit();
 }
-
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@ -174,7 +174,6 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
 static struct clock_event_device clkevt = {
 	.name		= "at91_tick",
 	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
 	.rating		= 150,
 	.set_next_event	= clkevt32k_next_event,
 	.set_mode	= clkevt32k_mode,
@ -265,17 +264,10 @@ void __init at91rm9200_timer_init(void)
 	at91_st_write(AT91_ST_RTMR, 1);

 	/* Setup timer clockevent, with minimum of two ticks (important!!) */
-	clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift);
-	clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt);
-	clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1;
 	clkevt.cpumask = cpumask_of(0);
-	clockevents_register_device(&clkevt);
+	clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK,
+					2, AT91_ST_ALMV);

 	/* register clocksource */
 	clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK);
 }
-
-struct sys_timer at91rm9200_timer = {
-	.init		= at91rm9200_timer_init,
-};
-
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@ -104,12 +104,38 @@ pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
 	}
 }

+static void at91sam926x_pit_suspend(struct clock_event_device *cedev)
+{
+	/* Disable timer */
+	pit_write(AT91_PIT_MR, 0);
+}
+
+static void at91sam926x_pit_reset(void)
+{
+	/* Disable timer and irqs */
+	pit_write(AT91_PIT_MR, 0);
+
+	/* Clear any pending interrupts, wait for PIT to stop counting */
+	while (PIT_CPIV(pit_read(AT91_PIT_PIVR)) != 0)
+		cpu_relax();
+
+	/* Start PIT but don't enable IRQ */
+	pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
+}
+
+static void at91sam926x_pit_resume(struct clock_event_device *cedev)
+{
+	at91sam926x_pit_reset();
+}
+
 static struct clock_event_device pit_clkevt = {
 	.name		= "pit",
 	.features	= CLOCK_EVT_FEAT_PERIODIC,
 	.shift		= 32,
 	.rating		= 100,
 	.set_mode	= pit_clkevt_mode,
+	.suspend	= at91sam926x_pit_suspend,
+	.resume		= at91sam926x_pit_resume,
 };


@ -150,19 +176,6 @@ static struct irqaction at91sam926x_pit_irq = {
 	.irq		= NR_IRQS_LEGACY + AT91_ID_SYS,
 };

-static void at91sam926x_pit_reset(void)
-{
-	/* Disable timer and irqs */
-	pit_write(AT91_PIT_MR, 0);
-
-	/* Clear any pending interrupts, wait for PIT to stop counting */
-	while (PIT_CPIV(pit_read(AT91_PIT_PIVR)) != 0)
-		cpu_relax();
-
-	/* Start PIT but don't enable IRQ */
-	pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
-}
-
 #ifdef CONFIG_OF
 static struct of_device_id pit_timer_ids[] = {
 	{ .compatible = "atmel,at91sam9260-pit" },
@ -211,7 +224,7 @@ static int __init of_at91sam926x_pit_init(void)
 /*
 * Set up both clocksource and clockevent support.
 */
-static void __init at91sam926x_pit_init(void)
+void __init at91sam926x_pit_init(void)
 {
 	unsigned long	pit_rate;
 	unsigned	bits;
@ -250,12 +263,6 @@ static void __init at91sam926x_pit_init(void)
 	clockevents_register_device(&pit_clkevt);
 }

-static void at91sam926x_pit_suspend(void)
-{
-	/* Disable timer */
-	pit_write(AT91_PIT_MR, 0);
-}
-
 void __init at91sam926x_ioremap_pit(u32 addr)
 {
 #if defined(CONFIG_OF)
@ -272,9 +279,3 @@ void __init at91sam926x_ioremap_pit(u32 addr)
 	if (!pit_base_addr)
 		panic("Impossible to ioremap PIT\n");
 }
-
-struct sys_timer at91sam926x_timer = {
-	.init		= at91sam926x_pit_init,
-	.suspend	= at91sam926x_pit_suspend,
-	.resume		= at91sam926x_pit_reset,
-};
--- a/arch/arm/mach-at91/at91x40_time.c
+++ b/arch/arm/mach-at91/at91x40_time.c
@ -42,9 +42,10 @@
 #define	AT91_TC_CLK1BASE	0x40
 #define	AT91_TC_CLK2BASE	0x80

-static unsigned long at91x40_gettimeoffset(void)
+static u32 at91x40_gettimeoffset(void)
 {
-	return (at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 / (AT91X40_MASTER_CLOCK / 128));
+	return (at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 /
+		(AT91X40_MASTER_CLOCK / 128)) * 1000;
 }

 static irqreturn_t at91x40_timer_interrupt(int irq, void *dev_id)
@ -64,6 +65,8 @@ void __init at91x40_timer_init(void)
 {
 	unsigned int v;

+	arch_gettimeoffset = at91x40_gettimeoffset;
+
 	at91_tc_write(AT91_TC_BCR, 0);
 	v = at91_tc_read(AT91_TC_BMR);
 	v = (v & ~AT91_TC_TC1XC1S) | AT91_TC_TC1XC1S_NONE;
@ -79,9 +82,3 @@ void __init at91x40_timer_init(void)

 	at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CCR, (AT91_TC_SWTRG | AT91_TC_CLKEN));
 }
-
-struct sys_timer at91x40_timer = {
-	.init	= at91x40_timer_init,
-	.offset	= at91x40_gettimeoffset,
-};
-
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@ -90,7 +90,7 @@ static void __init onearm_board_init(void)

 MACHINE_START(ONEARM, "Ajeco 1ARM single board computer")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= onearm_init_early,
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@ -210,7 +210,7 @@ static void __init afeb9260_board_init(void)

 MACHINE_START(AFEB9260, "Custom afeb9260 board")
 	/* Maintainer: Sergey Lapin <slapin@ossfans.org> */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= afeb9260_init_early,
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@ -187,7 +187,7 @@ static void __init cam60_board_init(void)

 MACHINE_START(CAM60, "KwikByte CAM60")
 	/* Maintainer: KwikByte */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= cam60_init_early,
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@ -157,7 +157,7 @@ static void __init carmeva_board_init(void)

 MACHINE_START(CARMEVA, "Carmeva")
 	/* Maintainer: Conitec Datasystems */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= carmeva_init_early,
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@ -374,7 +374,7 @@ MACHINE_START(CPUAT9260, "Eukrea CPU9260")
 MACHINE_START(CPUAT9G20, "Eukrea CPU9G20")
 #endif
 	/* Maintainer: Eric Benard - EUKREA Electromatique */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= cpu9krea_init_early,
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@ -178,7 +178,7 @@ static void __init cpuat91_board_init(void)

 MACHINE_START(CPUAT91, "Eukrea")
 	/* Maintainer: Eric Benard - EUKREA Electromatique */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= cpuat91_init_early,
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@ -251,7 +251,7 @@ static void __init csb337_board_init(void)

 MACHINE_START(CSB337, "Cogent CSB337")
 	/* Maintainer: Bill Gatliff */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= csb337_init_early,
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@ -132,7 +132,7 @@ static void __init csb637_board_init(void)

 MACHINE_START(CSB637, "Cogent CSB637")
 	/* Maintainer: Bill Gatliff */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= csb637_init_early,
--- a/arch/arm/mach-at91/board-dt.c
+++ b/arch/arm/mach-at91/board-dt.c
@ -49,7 +49,7 @@ static const char *at91_dt_board_compat[] __initdata = {

 DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)")
 	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= at91_dt_initialize,
--- a/arch/arm/mach-at91/board-eb01.c
+++ b/arch/arm/mach-at91/board-eb01.c
@ -44,7 +44,7 @@ static void __init at91eb01_init_early(void)

 MACHINE_START(AT91EB01, "Atmel AT91 EB01")
 	/* Maintainer: Greg Ungerer <gerg@snapgear.com> */
-	.timer		= &at91x40_timer,
+	.init_time	= at91x40_timer_init,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= at91eb01_init_early,
 	.init_irq	= at91eb01_init_irq,
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@ -116,7 +116,7 @@ static void __init eb9200_board_init(void)
 }

 MACHINE_START(ATEB9200, "Embest ATEB9200")
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= eb9200_init_early,
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@ -181,7 +181,7 @@ static void __init ecb_at91board_init(void)

 MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
 	/* Maintainer: emQbit.com */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ecb_at91init_early,
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@ -149,7 +149,7 @@ static void __init eco920_board_init(void)

 MACHINE_START(ECO920, "eco920")
 	/* Maintainer: Sascha Hauer */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= eco920_init_early,
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c
@ -159,7 +159,7 @@ static void __init flexibity_board_init(void)

 MACHINE_START(FLEXIBITY, "Flexibity Connect")
 	/* Maintainer: Maxim Osipov */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= flexibity_init_early,
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@ -261,7 +261,7 @@ static void __init foxg20_board_init(void)

 MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20")
 	/* Maintainer: Sergio Tanzilli */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= foxg20_init_early,
--- a/arch/arm/mach-at91/board-gsia18s.c
+++ b/arch/arm/mach-at91/board-gsia18s.c
@ -574,7 +574,7 @@ static void __init gsia18s_board_init(void)
 }

 MACHINE_START(GSIA18S, "GS_IA18_S")
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= gsia18s_init_early,
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@ -103,7 +103,7 @@ static void __init kafa_board_init(void)

 MACHINE_START(KAFA, "Sperry-Sun KAFA")
 	/* Maintainer: Sergei Sharonov */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= kafa_init_early,
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@ -149,7 +149,7 @@ static void __init kb9202_board_init(void)

 MACHINE_START(KB9200, "KB920x")
 	/* Maintainer: KwikByte, Inc. */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= kb9202_init_early,
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@ -378,7 +378,7 @@ static void __init neocore926_board_init(void)

 MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926")
 	/* Maintainer: ADENEO */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= neocore926_init_early,
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@ -217,7 +217,7 @@ static void __init pcontrol_g20_board_init(void)

 MACHINE_START(PCONTROL_G20, "PControl G20")
 	/* Maintainer: pgsellmann@portner-elektronik.at */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= pcontrol_g20_init_early,
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@ -119,7 +119,7 @@ static void __init picotux200_board_init(void)

 MACHINE_START(PICOTUX2XX, "picotux 200")
 	/* Maintainer: Kleinhenz Elektronik GmbH */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= picotux200_init_early,
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@ -257,7 +257,7 @@ static void __init ek_board_init(void)

 MACHINE_START(QIL_A9260, "CALAO QIL_A9260")
 	/* Maintainer: calao-systems */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
--- a/arch/arm/mach-at91/board-rm9200-dt.c
+++ b/arch/arm/mach-at91/board-rm9200-dt.c
@ -47,7 +47,7 @@ static const char *at91rm9200_dt_board_compat[] __initdata = {
 };

 DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)")
-	.timer		= &at91rm9200_timer,
+	.init_time      = at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= at91rm9200_dt_initialize,
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@ -219,7 +219,7 @@ static void __init dk_board_init(void)

 MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
 	/* Maintainer: SAN People/Atmel */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= dk_init_early,
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@ -186,7 +186,7 @@ static void __init ek_board_init(void)

 MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
 	/* Maintainer: SAN People/Atmel */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
--- a/arch/arm/mach-at91/board-rsi-ews.c
+++ b/arch/arm/mach-at91/board-rsi-ews.c
@ -222,7 +222,7 @@ static void __init rsi_ews_board_init(void)

 MACHINE_START(RSI_EWS, "RSI EWS")
 	/* Maintainer: Josef Holzmayr <holzmayr@rsi-elektrotechnik.de> */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= rsi_ews_init_early,
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@ -218,7 +218,7 @@ static void __init ek_board_init(void)

 MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
 	/* Maintainer: Olimex */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@ -343,7 +343,7 @@ static void __init ek_board_init(void)

 MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
 	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@ -612,7 +612,7 @@ MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
 MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
 #endif
 	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@ -443,7 +443,7 @@ static void __init ek_board_init(void)

 MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
 	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@ -409,7 +409,7 @@ static void __init ek_board_init(void)

 MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK")
 	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
@ -419,7 +419,7 @@ MACHINE_END

 MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod")
 	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@ -502,7 +502,7 @@ static void __init ek_board_init(void)

 MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
 	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@ -320,7 +320,7 @@ static void __init ek_board_init(void)

 MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
 	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@ -177,7 +177,7 @@ static void __init snapper9260_board_init(void)
 }

 MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module")
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= snapper9260_init_early,
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@ -272,7 +272,7 @@ static void __init stamp9g20evb_board_init(void)

 MACHINE_START(PORTUXG20, "taskit PortuxG20")
 	/* Maintainer: taskit GmbH */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= stamp9g20_init_early,
@ -282,7 +282,7 @@ MACHINE_END

 MACHINE_START(STAMP9G20, "taskit Stamp9G20")
 	/* Maintainer: taskit GmbH */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= stamp9g20_init_early,
--- a/arch/arm/mach-at91/board-usb-a926x.c
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@ -355,7 +355,7 @@ static void __init ek_board_init(void)

 MACHINE_START(USB_A9263, "CALAO USB_A9263")
 	/* Maintainer: calao-systems */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
@ -365,7 +365,7 @@ MACHINE_END

 MACHINE_START(USB_A9260, "CALAO USB_A9260")
 	/* Maintainer: calao-systems */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
@ -375,7 +375,7 @@ MACHINE_END

 MACHINE_START(USB_A9G20, "CALAO USB_A92G0")
 	/* Maintainer: Jean-Christophe PLAGNIOL-VILLARD */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
--- a/Show More
+++ b/Show More