usb: isp1760: Move driver from drivers/usb/host/ to drivers/usb/isp1760/

Now that this is DRD, it doesn't make sense to keep it under
drivers/usb/host.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

drivers/usb/Kconfig

@@ -104,6 +104,8 @@ source "drivers/usb/dwc2/Kconfig"
 
 source "drivers/usb/chipidea/Kconfig"
 
+source "drivers/usb/isp1760/Kconfig"
+
 comment "USB port drivers"
 
 if USB

drivers/usb/Makefile

@@ -8,6 +8,7 @@ obj-$(CONFIG_USB)		+= core/
 
 obj-$(CONFIG_USB_DWC3)		+= dwc3/
 obj-$(CONFIG_USB_DWC2)		+= dwc2/
+obj-$(CONFIG_USB_ISP1760)	+= isp1760/
 
 obj-$(CONFIG_USB_MON)		+= mon/
 
@@ -23,7 +24,6 @@ obj-$(CONFIG_USB_ISP1362_HCD)	+= host/
 obj-$(CONFIG_USB_U132_HCD)	+= host/
 obj-$(CONFIG_USB_R8A66597_HCD)	+= host/
 obj-$(CONFIG_USB_HWA_HCD)	+= host/
-obj-$(CONFIG_USB_ISP1760_HCD)	+= host/
 obj-$(CONFIG_USB_IMX21_HCD)	+= host/
 obj-$(CONFIG_USB_FSL_MPH_DR_OF)	+= host/
 obj-$(CONFIG_USB_FUSBH200_HCD)	+= host/

drivers/usb/gadget/udc/Kconfig

@@ -109,13 +109,6 @@ config USB_GR_UDC
           Select this to support Aeroflex Gaisler GRUSBDC cores from the GRLIB
 	  VHDL IP core library.
 
-config USB_ISP1761_UDC
-	boolean "NXP ISP1761 USB Device Controller"
-	depends on USB_ISP1760_HCD
-	help
-	   The NXP ISP1761 is a dual-role high-speed USB host and device
-	   controller.
-
 config USB_OMAP
 	tristate "OMAP USB Device Controller"
 	depends on ARCH_OMAP1

drivers/usb/host/Kconfig

@@ -331,20 +331,6 @@ config USB_ISP116X_HCD
 	  To compile this driver as a module, choose M here: the
 	  module will be called isp116x-hcd.
 
-config USB_ISP1760_HCD
-	tristate "ISP 1760 HCD support"
-	---help---
-	  The ISP1760 chip is a USB 2.0 host controller.
-
-	  This driver does not support isochronous transfers or OTG.
-	  This USB controller is usually attached to a non-DMA-Master
-	  capable bus. NXP's eval kit brings this chip on PCI card
-	  where the chip itself is behind a PLB to simulate such
-	  a bus.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called isp1760.
-
 config USB_ISP1362_HCD
 	tristate "ISP1362 HCD support"
 	---help---

drivers/usb/host/Makefile

@@ -5,9 +5,6 @@
 # tell define_trace.h where to find the xhci trace header
 CFLAGS_xhci-trace.o := -I$(src)
 
-isp1760-y := isp1760-core.o isp1760-hcd.o isp1760-if.o
-isp1760-$(CONFIG_USB_ISP1761_UDC) += isp1760-udc.o
-
 fhci-y := fhci-hcd.o fhci-hub.o fhci-q.o
 fhci-y += fhci-mem.o fhci-tds.o fhci-sched.o
 
@@ -70,7 +67,6 @@ obj-$(CONFIG_USB_SL811_HCD)	+= sl811-hcd.o
 obj-$(CONFIG_USB_SL811_CS)	+= sl811_cs.o
 obj-$(CONFIG_USB_U132_HCD)	+= u132-hcd.o
 obj-$(CONFIG_USB_R8A66597_HCD)	+= r8a66597-hcd.o
-obj-$(CONFIG_USB_ISP1760_HCD)	+= isp1760.o
 obj-$(CONFIG_USB_HWA_HCD)	+= hwa-hc.o
 obj-$(CONFIG_USB_IMX21_HCD)	+= imx21-hcd.o
 obj-$(CONFIG_USB_FSL_MPH_DR_OF)	+= fsl-mph-dr-of.o

drivers/usb/isp1760/Kconfig

@@ -0,0 +1,22 @@
+config USB_ISP1760
+	tristate "NXP ISP 1760/1761 support"
+	depends on USB
+	help
+	  Say Y or M here if your system as an ISP1760 USB host controller
+	  or an ISP1761 USB dual-role controller.
+
+	  This driver does not support isochronous transfers or OTG.
+	  This USB controller is usually attached to a non-DMA-Master
+	  capable bus. NXP's eval kit brings this chip on PCI card
+	  where the chip itself is behind a PLB to simulate such
+	  a bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called isp1760.
+
+config USB_ISP1761_UDC
+	boolean "NXP ISP1761 USB Device Controller"
+	depends on USB_ISP1760 && USB_GADGET
+	help
+	   The NXP ISP1761 is a dual-role high-speed USB host and device
+	   controller.

drivers/usb/isp1760/Makefile

@@ -0,0 +1,4 @@
+isp1760-y := isp1760-core.o isp1760-hcd.o isp1760-if.o
+isp1760-$(CONFIG_USB_ISP1761_UDC) += isp1760-udc.o
+
+obj-$(CONFIG_USB_ISP1760)	+= isp1760.o