Staging: bcm: Fixed warning about C99 comments.

Fixed warning 'C99 comments' found by checkpatch in driver bcm.

Signed-off-by: Tülin İzer <tulinizer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Tülin İzer 2013-05-15 03:40:48 +03:00 committed by Greg Kroah-Hartman
parent 0d751eca3b
commit 8546681507

View File

@ -74,17 +74,17 @@ int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int *pui
return status;
}
}
//Below Register should not br read in case of Manual and Protocol Idle mode.
/* Below Register should not br read in case of Manual and Protocol Idle mode */
else if(Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE)
{
//clear on read Register
/* clear on read Register */
bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG0, &uiRegRead, sizeof(uiRegRead));
if (bytes < 0) {
status = bytes;
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "rdm failed while clearing H/W Abort Reg0");
return status;
}
//clear on read Register
/* clear on read Register */
bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG1, &uiRegRead, sizeof(uiRegRead));
if (bytes < 0) {
status = bytes;
@ -94,7 +94,7 @@ int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int *pui
}
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Device Up from Idle Mode");
// Set Idle Mode Flag to False and Clear IdleMode reg.
/* Set Idle Mode Flag to False and Clear IdleMode reg. */
Adapter->IdleMode = FALSE;
Adapter->bTriedToWakeUpFromlowPowerMode = FALSE;
@ -158,7 +158,7 @@ static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int
unsigned char aucAbortPattern[8]={0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
struct bcm_interface_adapter *psInterfaceAdapter = Adapter->pvInterfaceAdapter;
//Abort Bus suspend if its already suspended
/* Abort Bus suspend if its already suspended */
if((TRUE == psInterfaceAdapter->bSuspended) && (TRUE == Adapter->bDoSuspend))
{
status = usb_autopm_get_interface(psInterfaceAdapter->interface);
@ -170,7 +170,7 @@ static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int
||
(Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE))
{
//write the SW abort pattern.
/* write the SW abort pattern. */
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Writing pattern<%d> to SW_ABORT_IDLEMODE_LOC\n", Pattern);
status = wrmalt(Adapter, SW_ABORT_IDLEMODE_LOC, &Pattern, sizeof(Pattern));
if(status)
@ -214,7 +214,7 @@ static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "NOB Sent down :%d", lenwritten);
}
//mdelay(25);
/* mdelay(25); */
timeout= jiffies + msecs_to_jiffies(50) ;
while( timeout > jiffies )
@ -271,7 +271,7 @@ void InterfaceHandleShutdownModeWakeup(struct bcm_mini_adapter *Adapter)
if(Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING)
{
// clear idlemode interrupt.
/* clear idlemode interrupt. */
uiRegVal = 0;
Status =wrmalt(Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &uiRegVal, sizeof(uiRegVal));
if(Status)
@ -284,7 +284,7 @@ void InterfaceHandleShutdownModeWakeup(struct bcm_mini_adapter *Adapter)
else
{
//clear Interrupt EP registers.
/* clear Interrupt EP registers. */
bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG0, &uiRegVal, sizeof(uiRegVal));
if (bytes < 0) {
Status = bytes;