FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2024-12-03 21:27:10 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

Add missing newlines to some uses of dev_<level> messages

Browse Source 
Found these while looking at printk uses.

Add missing newlines to dev_<level> uses
Add missing KERN_<level> prefixes to multiline dev_<level>s
Fixed a wierd->weird spelling typo
Added a newline to a printk

Signed-off-by: Joe Perches <joe@perches.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Tilman Schmidt <tilman@imap.cc>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: James Smart <James.Smart@Emulex.Com>
Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Joe Perches 2007-10-18 03:06:30 -07:00 committed by Linus Torvalds
parent 6c0286b199
commit 898eb71cb1
49 changed files with 126 additions and 117 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
arch/ia64/sn/kernel/xpnet.c
View File

@ -269,8 +269,9 @@ xpnet_receive(partid_t partid, int channel, struct xpnet_message *msg)
skb->protocol = eth_type_trans(skb, xpnet_device);
skb->ip_summed = CHECKSUM_UNNECESSARY;
dev_dbg(xpnet, "passing skb to network layer; \n\tskb->head=0x%p "
"skb->data=0x%p skb->tail=0x%p skb->end=0x%p skb->len=%d\n",
dev_dbg(xpnet, "passing skb to network layer\n"
KERN_DEBUG "\tskb->head=0x%p skb->data=0x%p skb->tail=0x%p "
"skb->end=0x%p skb->len=%d\n",
(void *)skb->head, (void *)skb->data, skb_tail_pointer(skb),
skb_end_pointer(skb), skb->len);
@ -576,10 +577,10 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
msg->tailout_ignore = end_addr - (u64)skb_tail_pointer(skb);
msg->buf_pa = __pa(start_addr);
dev_dbg(xpnet, "sending XPC message to %d:%d\nmsg->buf_pa="
"0x%lx, msg->size=%u, msg->leadin_ignore=%u, "
"msg->tailout_ignore=%u\n", dest_partid,
XPC_NET_CHANNEL, msg->buf_pa, msg->size,
dev_dbg(xpnet, "sending XPC message to %d:%d\n"
KERN_DEBUG "msg->buf_pa=0x%lx, msg->size=%u, "
"msg->leadin_ignore=%u, msg->tailout_ignore=%u\n",
dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size,
msg->leadin_ignore, msg->tailout_ignore);

4
drivers/block/xsysace.c
View File

@ -390,8 +390,8 @@ static inline void ace_dump_mem(void *base, int len)
static void ace_dump_regs(struct ace_device *ace)
{
dev_info(ace->dev, " ctrl: %.8x seccnt/cmd: %.4x ver:%.4x\n"
" status:%.8x mpu_lba:%.8x busmode:%4x\n"
" error: %.8x cfg_lba:%.8x fatstat:%.4x\n",
KERN_INFO " status:%.8x mpu_lba:%.8x busmode:%4x\n"
KERN_INFO " error: %.8x cfg_lba:%.8x fatstat:%.4x\n",
ace_in32(ace, ACE_CTRL),
ace_in(ace, ACE_SECCNTCMD),
ace_in(ace, ACE_VERSION),

10
drivers/char/isicom.c
View File

@ -1529,7 +1529,7 @@ static int __devinit reset_card(struct pci_dev *pdev,
portcount = inw(base + 0x2);
if (!inw(base + 0xe) & 0x1 || (portcount != 0 && portcount != 4 &&
portcount != 8 && portcount != 16)) {
dev_err(&pdev->dev, "ISILoad:PCI Card%d reset failure.",
dev_err(&pdev->dev, "ISILoad:PCI Card%d reset failure.\n",
card + 1);
retval = -EIO;
goto end;
@ -1622,7 +1622,9 @@ static int __devinit load_firmware(struct pci_dev *pdev,
if ((status = inw(base + 0x4)) != 0) {
dev_warn(&pdev->dev, "Card%d rejected load header:\n"
"Address:0x%x\nCount:0x%x\nStatus:0x%x\n",
KERN_WARNING "Address:0x%x\n"
KERN_WARNING "Count:0x%x\n"
KERN_WARNING "Status:0x%x\n",
index + 1, frame->addr, frame->count, status);
goto errrelfw;
}
@ -1666,7 +1668,9 @@ static int __devinit load_firmware(struct pci_dev *pdev,
if ((status = inw(base + 0x4)) != 0) {
dev_warn(&pdev->dev, "Card%d rejected verify header:\n"
"Address:0x%x\nCount:0x%x\nStatus: 0x%x\n",
KERN_WARNING "Address:0x%x\n"
KERN_WARNING "Count:0x%x\n"
KERN_WARNING "Status: 0x%x\n",
index + 1, frame->addr, frame->count, status);
goto errrelfw;
}

2
drivers/hwmon/adm1026.c
View File

@ -1651,7 +1651,7 @@ static int adm1026_detect(struct i2c_adapter *adapter, int address,
break;
default :
dev_err(&adapter->dev, ": Internal error, invalid "
"kind (%d)!", kind);
"kind (%d)!\n", kind);
err = -EFAULT;
goto exitfree;
}

2
drivers/hwmon/lm63.c
View File

@ -533,7 +533,7 @@ static void lm63_init_client(struct i2c_client *client)
/* Start converting if needed */
if (data->config & 0x40) { /* standby */
dev_dbg(&client->dev, "Switching to operational mode");
dev_dbg(&client->dev, "Switching to operational mode\n");
data->config &= 0xA7;
i2c_smbus_write_byte_data(client, LM63_REG_CONFIG1,
data->config);

2
drivers/hwmon/vt1211.c
View File

@ -795,7 +795,7 @@ static ssize_t set_pwm_auto_point_pwm(struct device *dev,
if ((val < 0) || (val > 255)) {
dev_err(dev, "pwm value %ld is out of range. "
"Choose a value between 0 and 255." , val);
"Choose a value between 0 and 255.\n" , val);
return -EINVAL;
}

2
drivers/hwmon/w83791d.c
View File

@ -1096,7 +1096,7 @@ static int w83791d_detect(struct i2c_adapter *adapter, int address, int kind)
if (kind == w83791d) {
client_name = "w83791d";
} else {
dev_err(dev, "w83791d: Internal error: unknown kind (%d)?!?",
dev_err(dev, "w83791d: Internal error: unknown kind (%d)?!?\n",
kind);
goto error1;
}

4
drivers/hwmon/w83792d.c
View File

@ -1385,8 +1385,8 @@ w83792d_detect(struct i2c_adapter *adapter, int address, int kind)
if (kind == w83792d) {
client_name = "w83792d";
} else {
dev_err(dev, "w83792d: Internal error: unknown"
" kind (%d)?!?", kind);
dev_err(dev, "w83792d: Internal error: unknown kind (%d)?!?\n",
kind);
goto ERROR1;
}

8
drivers/i2c/busses/i2c-pmcmsp.c
View File

@ -591,18 +591,18 @@ static int pmcmsptwi_master_xfer(struct i2c_adapter *adap,
if (msg->flags & I2C_M_TEN)
pmcmsptwi_set_twi_config(&oldcfg, data);
dev_dbg(&adap->dev, "I2C %s of %d bytes ",
(msg->flags & I2C_M_RD) ? "read" : "write", msg->len);
dev_dbg(&adap->dev, "I2C %s of %d bytes %s\n",
(msg->flags & I2C_M_RD) ? "read" : "write", msg->len,
(ret == MSP_TWI_XFER_OK) ? "succeeded" : "failed");
if (ret != MSP_TWI_XFER_OK) {
/*
* TODO: We could potentially loop and retry in the case
* of MSP_TWI_XFER_TIMEOUT.
*/
dev_dbg(&adap->dev, "failed\n");
return -1;
}
dev_dbg(&adap->dev, "succeeded\n");
return 0;
}

2
drivers/i2c/busses/i2c-pnx.c
View File

@ -575,7 +575,7 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
else {
freq_mhz = PNX_DEFAULT_FREQ;
dev_info(&pdev->dev, "Setting bus frequency to default value: "
"%d MHz", freq_mhz);
"%d MHz\n", freq_mhz);
}
i2c_pnx->adapter->algo = &pnx_algorithm;

2
drivers/i2c/chips/menelaus.c
View File

@ -1195,7 +1195,7 @@ static int menelaus_probe(struct i2c_client *client)
err = request_irq(client->irq, menelaus_irq, IRQF_DISABLED,
DRIVER_NAME, menelaus);
if (err) {
dev_dbg(&client->dev, "can't get IRQ %d, err %d",
dev_dbg(&client->dev, "can't get IRQ %d, err %d\n",
client->irq, err);
goto fail1;
}

4
drivers/infiniband/hw/ehca/ehca_main.c
View File

@ -579,12 +579,12 @@ static ssize_t ehca_show_##name(struct device *dev, \
\
rblock = ehca_alloc_fw_ctrlblock(GFP_KERNEL); \
if (!rblock) { \
dev_err(dev, "Can't allocate rblock memory."); \
dev_err(dev, "Can't allocate rblock memory.\n"); \
return 0; \
} \
\
if (hipz_h_query_hca(shca->ipz_hca_handle, rblock) != H_SUCCESS) { \
dev_err(dev, "Can't query device properties"); \
dev_err(dev, "Can't query device properties\n"); \
ehca_free_fw_ctrlblock(rblock); \
return 0; \
} \

3
drivers/isdn/gigaset/common.c
View File

@ -534,7 +534,8 @@ int gigaset_fill_inbuf(struct inbuf_t *inbuf, const unsigned char *src,
n = RBUFSIZE - tail;
if (!n) {
dev_err(inbuf->cs->dev,
"buffer overflow (%u bytes lost)", bytesleft);
"buffer overflow (%u bytes lost)\n",
bytesleft);
break;
}
if (n > bytesleft)

2
drivers/mtd/nand/s3c2410.c
View File

@ -696,7 +696,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev,
info->clk = clk_get(&pdev->dev, "nand");
if (IS_ERR(info->clk)) {
dev_err(&pdev->dev, "failed to get clock");
dev_err(&pdev->dev, "failed to get clock\n");
err = -ENOENT;
goto exit_error;
}

2
drivers/net/ax88796.c
View File

@ -900,7 +900,7 @@ static int ax_probe(struct platform_device *pdev)
ax->map2 = ioremap(res->start, size);
if (ax->map2 == NULL) {
dev_err(&pdev->dev, "cannot map reset register");
dev_err(&pdev->dev, "cannot map reset register\n");
ret = -ENXIO;
goto exit_mem2;
}

2
drivers/net/bnx2.c
View File

@ -6428,7 +6428,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
/* enable device (incl. PCI PM wakeup), and bus-mastering */
rc = pci_enable_device(pdev);
if (rc) {
dev_err(&pdev->dev, "Cannot enable PCI device, aborting.");
dev_err(&pdev->dev, "Cannot enable PCI device, aborting.\n");
goto err_out;
}

8
drivers/net/ehea/ehea_main.c
View File

@ -3218,7 +3218,7 @@ static int __devinit ehea_probe_adapter(struct of_device *dev,
/* get adapter properties */
ret = ehea_sense_adapter_attr(adapter);
if (ret) {
dev_err(&dev->dev, "sense_adapter_attr failed: %d", ret);
dev_err(&dev->dev, "sense_adapter_attr failed: %d\n", ret);
goto out_free_ad;
}
@ -3226,7 +3226,7 @@ static int __devinit ehea_probe_adapter(struct of_device *dev,
EHEA_NEQ, EHEA_MAX_ENTRIES_EQ, 1);
if (!adapter->neq) {
ret = -EIO;
dev_err(&dev->dev, "NEQ creation failed");
dev_err(&dev->dev, "NEQ creation failed\n");
goto out_free_ad;
}
@ -3237,7 +3237,7 @@ static int __devinit ehea_probe_adapter(struct of_device *dev,
ehea_interrupt_neq, IRQF_DISABLED,
"ehea_neq", adapter);
if (ret) {
dev_err(&dev->dev, "requesting NEQ IRQ failed");
dev_err(&dev->dev, "requesting NEQ IRQ failed\n");
goto out_kill_eq;
}
@ -3247,7 +3247,7 @@ static int __devinit ehea_probe_adapter(struct of_device *dev,
ret = ehea_setup_ports(adapter);
if (ret) {
dev_err(&dev->dev, "setup_ports failed");
dev_err(&dev->dev, "setup_ports failed\n");
goto out_rem_dev_sysfs;
}

3
drivers/net/myri10ge/myri10ge.c
View File

@ -3058,7 +3058,8 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (status != 0) {
dac_enabled = 0;
dev_err(&pdev->dev,
"64-bit pci address mask was refused, trying 32-bit");
"64-bit pci address mask was refused, "
"trying 32-bit\n");
status = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
}
if (status != 0) {

2
drivers/net/sky2.c
View File

@ -3961,7 +3961,7 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
struct net_device *dev = alloc_etherdev(sizeof(*sky2));
if (!dev) {
dev_err(&hw->pdev->dev, "etherdev alloc failed");
dev_err(&hw->pdev->dev, "etherdev alloc failed\n");
return NULL;
}

16
drivers/net/usb/mcs7830.c
View File

@ -114,8 +114,8 @@ static void mcs7830_async_cmd_callback(struct urb *urb)
struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
if (urb->status < 0)
printk(KERN_DEBUG "mcs7830_async_cmd_callback() failed with %d",
urb->status);
printk(KERN_DEBUG "%s() failed with %d\n",
__FUNCTION__, urb->status);
kfree(req);
usb_free_urb(urb);
@ -129,15 +129,15 @@ static void mcs7830_set_reg_async(struct usbnet *dev, u16 index, u16 size, void
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
dev_dbg(&dev->udev->dev, "Error allocating URB "
"in write_cmd_async!");
dev_dbg(&dev->udev->dev,
"Error allocating URB in write_cmd_async!\n");
return;
}
req = kmalloc(sizeof *req, GFP_ATOMIC);
if (!req) {
dev_err(&dev->udev->dev, "Failed to allocate memory for "
"control request");
dev_err(&dev->udev->dev,
"Failed to allocate memory for control request\n");
goto out;
}
req->bRequestType = MCS7830_WR_BMREQ;
@ -153,8 +153,8 @@ static void mcs7830_set_reg_async(struct usbnet *dev, u16 index, u16 size, void
ret = usb_submit_urb(urb, GFP_ATOMIC);
if (ret < 0) {
dev_err(&dev->udev->dev, "Error submitting the control "
"message: ret=%d", ret);
dev_err(&dev->udev->dev,
"Error submitting the control message: ret=%d\n", ret);
goto out;
}
return;

2
drivers/net/xen-netfront.c
View File

@ -1526,7 +1526,7 @@ static int xennet_connect(struct net_device *dev)
if (!feature_rx_copy) {
dev_info(&dev->dev,
"backend does not support copying recieve path");
"backend does not support copying receive path\n");
return -ENODEV;
}

2
drivers/power/ds2760_battery.c
View File

@ -366,7 +366,7 @@ static int ds2760_battery_probe(struct platform_device *pdev)
retval = power_supply_register(&pdev->dev, &di->bat);
if (retval) {
dev_err(di->dev, "failed to register battery");
dev_err(di->dev, "failed to register battery\n");
goto batt_failed;
}

2
drivers/ps3/ps3stor_lib.c
View File

@ -66,7 +66,7 @@ static int ps3stor_probe_access(struct ps3_storage_device *dev)
if (n > 1)
dev_info(&dev->sbd.core,
"%s:%u: %lu accessible regions found. Only the first "
"one will be used",
"one will be used\n",
__func__, __LINE__, n);
dev->region_idx = __ffs(dev->accessible_regions);
dev_info(&dev->sbd.core,

5
drivers/rtc/rtc-sysfs.c
View File

@ -200,9 +200,8 @@ void rtc_sysfs_add_device(struct rtc_device *rtc)
err = device_create_file(&rtc->dev, &dev_attr_wakealarm);
if (err)
dev_err(rtc->dev.parent, "failed to create "
"alarm attribute, %d",
err);
dev_err(rtc->dev.parent,
"failed to create alarm attribute, %d\n", err);
}
void rtc_sysfs_del_device(struct rtc_device *rtc)

8
drivers/scsi/lpfc/lpfc_sli.c
View File

@ -1243,7 +1243,8 @@ void lpfc_sli_poll_fcp_ring(struct lpfc_hba *phba)
memset(adaptermsg, 0, LPFC_MAX_ADPTMSG);
memcpy(&adaptermsg[0], (uint8_t *) irsp,
MAX_MSG_DATA);
dev_warn(&((phba->pcidev)->dev), "lpfc%d: %s",
dev_warn(&((phba->pcidev)->dev),
"lpfc%d: %s\n",
phba->brd_no, adaptermsg);
} else {
/* Unknown IOCB command */
@ -1430,7 +1431,8 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba *phba,
memset(adaptermsg, 0, LPFC_MAX_ADPTMSG);
memcpy(&adaptermsg[0], (uint8_t *) irsp,
MAX_MSG_DATA);
dev_warn(&((phba->pcidev)->dev), "lpfc%d: %s",
dev_warn(&((phba->pcidev)->dev),
"lpfc%d: %s\n",
phba->brd_no, adaptermsg);
} else {
/* Unknown IOCB command */
@ -1681,7 +1683,7 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba,
memcpy(&adaptermsg[0], (uint8_t *) irsp,
MAX_MSG_DATA);
dev_warn(&((phba->pcidev)->dev),
"lpfc%d: %s",
"lpfc%d: %s\n",
phba->brd_no, adaptermsg);
} else {
/* Unknown IOCB command */

2
drivers/scsi/qla4xxx/ql4_os.c
View File

@ -1286,7 +1286,7 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev,
ret = scsi_init_shared_tag_map(host, MAX_SRBS);
if (ret) {
dev_warn(&ha->pdev->dev, "scsi_init_shared_tag_map failed");
dev_warn(&ha->pdev->dev, "scsi_init_shared_tag_map failed\n");
goto probe_failed;
}

2
drivers/spi/spi_bfin5xx.c
View File

@ -1070,7 +1070,7 @@ static int setup(struct spi_device *spi)
return -ENODEV;
}
dev_dbg(&spi->dev, "setup spi chip %s, width is %d, dma is %d,",
dev_dbg(&spi->dev, "setup spi chip %s, width is %d, dma is %d\n",
spi->modalias, chip->width, chip->enable_dma);
dev_dbg(&spi->dev, "ctl_reg is 0x%x, flag_reg is 0x%x\n",
chip->ctl_reg, chip->flag);

4
drivers/spi/spi_imx.c
View File

@ -1194,7 +1194,7 @@ static int setup(struct spi_device *spi)
chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
if (!chip) {
dev_err(&spi->dev,
"setup - cannot allocate controller state");
"setup - cannot allocate controller state\n");
return -ENOMEM;
}
chip->control = SPI_DEFAULT_CONTROL;
@ -1206,7 +1206,7 @@ static int setup(struct spi_device *spi)
if (!chip_info) {
dev_err(&spi->dev,
"setup - "
"cannot allocate controller data");
"cannot allocate controller data\n");
status = -ENOMEM;
goto err_first_setup;
}

34
drivers/usb/class/cdc-acm.c
View File

@ -332,7 +332,7 @@ static void acm_read_bulk(struct urb *urb)
return;
if (status)
dev_dbg(&acm->data->dev, "bulk rx status %d", status);
dev_dbg(&acm->data->dev, "bulk rx status %d\n", status);
buf = rcv->buffer;
buf->size = urb->actual_length;
@ -831,13 +831,13 @@ static int acm_probe (struct usb_interface *intf,
/* normal probing*/
if (!buffer) {
err("Wierd descriptor references\n");
err("Weird descriptor references\n");
return -EINVAL;
}
if (!buflen) {
if (intf->cur_altsetting->endpoint->extralen && intf->cur_altsetting->endpoint->extra) {
dev_dbg(&intf->dev,"Seeking extra descriptors on endpoint");
dev_dbg(&intf->dev,"Seeking extra descriptors on endpoint\n");
buflen = intf->cur_altsetting->endpoint->extralen;
buffer = intf->cur_altsetting->endpoint->extra;
} else {
@ -887,24 +887,24 @@ next_desc:
if (!union_header) {
if (call_interface_num > 0) {
dev_dbg(&intf->dev,"No union descriptor, using call management descriptor");
dev_dbg(&intf->dev,"No union descriptor, using call management descriptor\n");
data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = call_interface_num));
control_interface = intf;
} else {
dev_dbg(&intf->dev,"No union descriptor, giving up");
dev_dbg(&intf->dev,"No union descriptor, giving up\n");
return -ENODEV;
}
} else {
control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0);
data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = union_header->bSlaveInterface0));
if (!control_interface || !data_interface) {
dev_dbg(&intf->dev,"no interfaces");
dev_dbg(&intf->dev,"no interfaces\n");
return -ENODEV;
}
}
if (data_interface_num != call_interface_num)
dev_dbg(&intf->dev,"Seperate call control interface. That is not fully supported.");
dev_dbg(&intf->dev,"Seperate call control interface. That is not fully supported.\n");
skip_normal_probe:
@ -912,7 +912,7 @@ skip_normal_probe:
if (data_interface->cur_altsetting->desc.bInterfaceClass != CDC_DATA_INTERFACE_TYPE) {
if (control_interface->cur_altsetting->desc.bInterfaceClass == CDC_DATA_INTERFACE_TYPE) {
struct usb_interface *t;
dev_dbg(&intf->dev,"Your device has switched interfaces.");
dev_dbg(&intf->dev,"Your device has switched interfaces.\n");
t = control_interface;
control_interface = data_interface;
@ -927,7 +927,7 @@ skip_normal_probe:
return -ENODEV;
if (usb_interface_claimed(data_interface)) { /* valid in this context */
dev_dbg(&intf->dev,"The data interface isn't available");
dev_dbg(&intf->dev,"The data interface isn't available\n");
return -EBUSY;
}
@ -944,7 +944,7 @@ skip_normal_probe:
if (!usb_endpoint_dir_in(epread)) {
/* descriptors are swapped */
struct usb_endpoint_descriptor *t;
dev_dbg(&intf->dev,"The data interface has switched endpoints");
dev_dbg(&intf->dev,"The data interface has switched endpoints\n");
t = epread;
epread = epwrite;
@ -959,7 +959,7 @@ skip_normal_probe:
}
if (!(acm = kzalloc(sizeof(struct acm), GFP_KERNEL))) {
dev_dbg(&intf->dev, "out of memory (acm kzalloc)");
dev_dbg(&intf->dev, "out of memory (acm kzalloc)\n");
goto alloc_fail;
}
@ -985,26 +985,26 @@ skip_normal_probe:
buf = usb_buffer_alloc(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma);
if (!buf) {
dev_dbg(&intf->dev, "out of memory (ctrl buffer alloc)");
dev_dbg(&intf->dev, "out of memory (ctrl buffer alloc)\n");
goto alloc_fail2;
}
acm->ctrl_buffer = buf;
if (acm_write_buffers_alloc(acm) < 0) {
dev_dbg(&intf->dev, "out of memory (write buffer alloc)");
dev_dbg(&intf->dev, "out of memory (write buffer alloc)\n");
goto alloc_fail4;
}
acm->ctrlurb = usb_alloc_urb(0, GFP_KERNEL);
if (!acm->ctrlurb) {
dev_dbg(&intf->dev, "out of memory (ctrlurb kmalloc)");
dev_dbg(&intf->dev, "out of memory (ctrlurb kmalloc)\n");
goto alloc_fail5;
}
for (i = 0; i < num_rx_buf; i++) {
struct acm_ru *rcv = &(acm->ru[i]);
if (!(rcv->urb = usb_alloc_urb(0, GFP_KERNEL))) {
dev_dbg(&intf->dev, "out of memory (read urbs usb_alloc_urb)");
dev_dbg(&intf->dev, "out of memory (read urbs usb_alloc_urb)\n");
goto alloc_fail7;
}
@ -1015,13 +1015,13 @@ skip_normal_probe:
struct acm_rb *buf = &(acm->rb[i]);
if (!(buf->base = usb_buffer_alloc(acm->dev, readsize, GFP_KERNEL, &buf->dma))) {
dev_dbg(&intf->dev, "out of memory (read bufs usb_buffer_alloc)");
dev_dbg(&intf->dev, "out of memory (read bufs usb_buffer_alloc)\n");
goto alloc_fail7;
}
}
acm->writeurb = usb_alloc_urb(0, GFP_KERNEL);
if (!acm->writeurb) {
dev_dbg(&intf->dev, "out of memory (writeurb kmalloc)");
dev_dbg(&intf->dev, "out of memory (writeurb kmalloc)\n");
goto alloc_fail7;
}

2
drivers/usb/core/endpoint.c
View File

@ -291,7 +291,7 @@ int usb_create_ep_files(struct device *parent,
retval = endpoint_get_minor(ep_dev);
if (retval) {
dev_err(parent, "can not allocate minor number for %s",
dev_err(parent, "can not allocate minor number for %s\n",
ep_dev->dev.bus_id);
goto error_register;
}

4
drivers/usb/core/message.c
View File

@ -1526,7 +1526,7 @@ int usb_set_configuration(struct usb_device *dev, int configuration)
new_interfaces = kmalloc(nintf * sizeof(*new_interfaces),
GFP_KERNEL);
if (!new_interfaces) {
dev_err(&dev->dev, "Out of memory");
dev_err(&dev->dev, "Out of memory\n");
return -ENOMEM;
}
@ -1535,7 +1535,7 @@ int usb_set_configuration(struct usb_device *dev, int configuration)
sizeof(struct usb_interface),
GFP_KERNEL);
if (!new_interfaces[n]) {
dev_err(&dev->dev, "Out of memory");
dev_err(&dev->dev, "Out of memory\n");
ret = -ENOMEM;
free_interfaces:
while (--n >= 0)

2
drivers/usb/host/ohci-s3c2410.c
View File

@ -358,7 +358,7 @@ static int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1;
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
dev_err(&dev->dev, "request_mem_region failed");
dev_err(&dev->dev, "request_mem_region failed\n");
retval = -EBUSY;
goto err_put;
}

4
drivers/usb/misc/adutux.c
View File

@ -805,7 +805,7 @@ static int adu_probe(struct usb_interface *interface,
dev->minor = interface->minor;
/* let the user know what node this device is now attached to */
dev_info(&interface->dev, "ADU%d %s now attached to /dev/usb/adutux%d",
dev_info(&interface->dev, "ADU%d %s now attached to /dev/usb/adutux%d\n",
udev->descriptor.idProduct, dev->serial_number,
(dev->minor - ADU_MINOR_BASE));
exit:
@ -851,7 +851,7 @@ static void adu_disconnect(struct usb_interface *interface)
mutex_unlock(&dev->mtx);
}
dev_info(&interface->dev, "ADU device adutux%d now disconnected",
dev_info(&interface->dev, "ADU device adutux%d now disconnected\n",
(minor - ADU_MINOR_BASE));
dbg(2," %s : leave", __FUNCTION__);

8
drivers/usb/misc/iowarrior.c
View File

@ -216,7 +216,7 @@ static void iowarrior_callback(struct urb *urb)
exit:
retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval)
dev_err(&dev->interface->dev, "%s - usb_submit_urb failed with result %d",
dev_err(&dev->interface->dev, "%s - usb_submit_urb failed with result %d\n",
__FUNCTION__, retval);
}
@ -451,7 +451,7 @@ static ssize_t iowarrior_write(struct file *file,
break;
default:
/* what do we have here ? An unsupported Product-ID ? */
dev_err(&dev->interface->dev, "%s - not supported for product=0x%x",
dev_err(&dev->interface->dev, "%s - not supported for product=0x%x\n",
__FUNCTION__, dev->product_id);
retval = -EFAULT;
goto exit;
@ -526,7 +526,7 @@ static int iowarrior_ioctl(struct inode *inode, struct file *file,
} else {
retval = -EINVAL;
dev_err(&dev->interface->dev,
"ioctl 'IOW_WRITE' is not supported for product=0x%x.",
"ioctl 'IOW_WRITE' is not supported for product=0x%x.\n",
dev->product_id);
}
break;
@ -752,7 +752,7 @@ static int iowarrior_probe(struct usb_interface *interface,
/* allocate memory for our device state and intialize it */
dev = kzalloc(sizeof(struct iowarrior), GFP_KERNEL);
if (dev == NULL) {
dev_err(&interface->dev, "Out of memory");
dev_err(&interface->dev, "Out of memory\n");
return retval;
}

2
drivers/usb/misc/phidgetmotorcontrol.c
View File

@ -155,7 +155,7 @@ resubmit:
retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval)
dev_err(&mc->intf->dev,
"can't resubmit intr, %s-%s/motorcontrol0, retval %d",
"can't resubmit intr, %s-%s/motorcontrol0, retval %d\n",
mc->udev->bus->bus_name,
mc->udev->devpath, retval);
}

4
drivers/usb/serial/ftdi_sio.c
View File

@ -1071,7 +1071,7 @@ static ssize_t show_latency_timer(struct device *dev, struct device_attribute *a
(char*) &latency, 1, WDR_TIMEOUT);
if (rv < 0) {
dev_err(dev, "Unable to read latency timer: %i", rv);
dev_err(dev, "Unable to read latency timer: %i\n", rv);
return -EIO;
}
return sprintf(buf, "%i\n", latency);
@ -1098,7 +1098,7 @@ static ssize_t store_latency_timer(struct device *dev, struct device_attribute *
buf, 0, WDR_TIMEOUT);
if (rv < 0) {
dev_err(dev, "Unable to write latency timer: %i", rv);
dev_err(dev, "Unable to write latency timer: %i\n", rv);
return -EIO;
}

2
drivers/usb/serial/io_edgeport.c
View File

@ -2882,7 +2882,7 @@ static int edge_startup (struct usb_serial *serial)
(edge_serial->product_info.NumPorts != serial->num_ports)) {
dev_warn(&serial->dev->dev, "Device Reported %d serial ports "
"vs. core thinking we have %d ports, email "
"greg@kroah.com this information.",
"greg@kroah.com this information.\n",
edge_serial->product_info.NumPorts,
serial->num_ports);
}

18
drivers/usb/serial/ipw.c
View File

@ -227,7 +227,7 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp)
0,
100000);
if (result < 0)
dev_err(&port->dev, "Init of modem failed (error = %d)", result);
dev_err(&port->dev, "Init of modem failed (error = %d)\n", result);
/* reset the bulk pipes */
usb_clear_halt(dev, usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress));
@ -255,7 +255,7 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp)
0,
100000);
if (result < 0)
dev_err(&port->dev, "Enabling bulk RxRead failed (error = %d)", result);
dev_err(&port->dev, "Enabling bulk RxRead failed (error = %d)\n", result);
/*--4: setup the initial flowcontrol */
dbg("%s:setting init flowcontrol (%s)",__FUNCTION__,buf_flow_init);
@ -268,7 +268,7 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp)
0x10,
200000);
if (result < 0)
dev_err(&port->dev, "initial flowcontrol failed (error = %d)", result);
dev_err(&port->dev, "initial flowcontrol failed (error = %d)\n", result);
/*--5: raise the dtr */
@ -282,7 +282,7 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp)
0,
200000);
if (result < 0)
dev_err(&port->dev, "setting dtr failed (error = %d)", result);
dev_err(&port->dev, "setting dtr failed (error = %d)\n", result);
/*--6: raise the rts */
dbg("%s:raising rts",__FUNCTION__);
@ -295,7 +295,7 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp)
0,
200000);
if (result < 0)
dev_err(&port->dev, "setting dtr failed (error = %d)", result);
dev_err(&port->dev, "setting dtr failed (error = %d)\n", result);
kfree(buf_flow_init);
return 0;
@ -322,7 +322,7 @@ static void ipw_close(struct usb_serial_port *port, struct file * filp)
0,
200000);
if (result < 0)
dev_err(&port->dev, "dropping dtr failed (error = %d)", result);
dev_err(&port->dev, "dropping dtr failed (error = %d)\n", result);
/*--2: drop the rts */
dbg("%s:dropping rts",__FUNCTION__);
@ -334,7 +334,7 @@ static void ipw_close(struct usb_serial_port *port, struct file * filp)
0,
200000);
if (result < 0)
dev_err(&port->dev, "dropping rts failed (error = %d)", result);
dev_err(&port->dev, "dropping rts failed (error = %d)\n", result);
/*--3: purge */
@ -347,7 +347,7 @@ static void ipw_close(struct usb_serial_port *port, struct file * filp)
0,
200000);
if (result < 0)
dev_err(&port->dev, "purge failed (error = %d)", result);
dev_err(&port->dev, "purge failed (error = %d)\n", result);
/* send RXBULK_off (tell modem to stop transmitting bulk data on rx chan) */
@ -361,7 +361,7 @@ static void ipw_close(struct usb_serial_port *port, struct file * filp)
100000);
if (result < 0)
dev_err(&port->dev, "Disabling bulk RxRead failed (error = %d)", result);
dev_err(&port->dev, "Disabling bulk RxRead failed (error = %d)\n", result);
/* shutdown any in-flight urbs that we know about */
usb_kill_urb(port->read_urb);

4
drivers/usb/serial/mos7720.c
View File

@ -478,7 +478,7 @@ static int mos7720_open(struct usb_serial_port *port, struct file * filp)
response = usb_submit_urb(port0->interrupt_in_urb, GFP_KERNEL);
if (response)
dev_err(&port->dev,
"%s - Error %d submitting control urb",
"%s - Error %d submitting control urb\n",
__FUNCTION__, response);
}
@ -492,7 +492,7 @@ static int mos7720_open(struct usb_serial_port *port, struct file * filp)
response = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (response)
dev_err(&port->dev,
"%s - Error %d submitting read urb", __FUNCTION__, response);
"%s - Error %d submitting read urb\n", __FUNCTION__, response);
/* initialize our icount structure */
memset(&(mos7720_port->icount), 0x00, sizeof(mos7720_port->icount));

2
drivers/usb/serial/oti6858.c
View File

@ -256,7 +256,7 @@ static void setup_line(struct work_struct *work)
100);
if (result != OTI6858_CTRL_PKT_SIZE) {
dev_err(&port->dev, "%s(): error reading status", __FUNCTION__);
dev_err(&port->dev, "%s(): error reading status\n", __FUNCTION__);
kfree(new_setup);
/* we will try again */
schedule_delayed_work(&priv->delayed_setup_work, msecs_to_jiffies(2));

10
drivers/usb/serial/sierra.c
View File

@ -48,7 +48,7 @@ enum devicetype {
static int sierra_set_power_state(struct usb_device *udev, __u16 swiState)
{
int result;
dev_dbg(&udev->dev, "%s", "SET POWER STATE");
dev_dbg(&udev->dev, "%s", "SET POWER STATE\n");
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x00, /* __u8 request */
0x40, /* __u8 request type */
@ -63,7 +63,7 @@ static int sierra_set_power_state(struct usb_device *udev, __u16 swiState)
static int sierra_set_ms_mode(struct usb_device *udev, __u16 eSocMode)
{
int result;
dev_dbg(&udev->dev, "%s", "DEVICE MODE SWITCH");
dev_dbg(&udev->dev, "%s", "DEVICE MODE SWITCH\n");
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
SWIMS_USB_REQUEST_SetMode, /* __u8 request */
SWIMS_USB_REQUEST_TYPE_SetMode, /* __u8 request type */
@ -397,7 +397,7 @@ static void sierra_indat_callback(struct urb *urb)
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err)
dev_err(&port->dev, "resubmit read urb failed."
"(%d)", err);
"(%d)\n", err);
}
}
return;
@ -525,7 +525,7 @@ static int sierra_open(struct usb_serial_port *port, struct file *filp)
result = usb_submit_urb(urb, GFP_KERNEL);
if (result) {
dev_err(&port->dev, "submit urb %d failed (%d) %d",
dev_err(&port->dev, "submit urb %d failed (%d) %d\n",
i, result, urb->transfer_buffer_length);
}
}
@ -538,7 +538,7 @@ static int sierra_open(struct usb_serial_port *port, struct file *filp)
if (port->interrupt_in_urb) {
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result)
dev_err(&port->dev, "submit irq_in urb failed %d",
dev_err(&port->dev, "submit irq_in urb failed %d\n",
result);
}
return 0;

2
drivers/video/gxt4500.c
View File

@ -636,7 +636,7 @@ static int __devinit gxt4500_probe(struct pci_dev *pdev,
info = framebuffer_alloc(sizeof(struct gxt4500_par), &pdev->dev);
if (!info) {
dev_err(&pdev->dev, "gxt4500: cannot alloc FB info record");
dev_err(&pdev->dev, "gxt4500: cannot alloc FB info record\n");
goto err_free_fb;
}
par = info->par;

2
drivers/video/omap/blizzard.c
View File

@ -225,7 +225,7 @@ static void blizzard_restart_sdram(void)
while (!(blizzard_read_reg(BLIZZARD_MEM_BANK0_STATUS) & 0x01)) {
if (time_after(jiffies, tmo)) {
dev_err(blizzard.fbdev->dev,
"s1d1374x: SDRAM not ready");
"s1d1374x: SDRAM not ready\n");
break;
}
msleep(1);

6
drivers/video/omap/dispc.c
View File

@ -880,19 +880,19 @@ static irqreturn_t omap_dispc_irq_handler(int irq, void *dev)
static int get_dss_clocks(void)
{
if (IS_ERR((dispc.dss_ick = clk_get(dispc.fbdev->dev, "dss_ick")))) {
dev_err(dispc.fbdev->dev, "can't get dss_ick");
dev_err(dispc.fbdev->dev, "can't get dss_ick\n");
return PTR_ERR(dispc.dss_ick);
}
if (IS_ERR((dispc.dss1_fck = clk_get(dispc.fbdev->dev, "dss1_fck")))) {
dev_err(dispc.fbdev->dev, "can't get dss1_fck");
dev_err(dispc.fbdev->dev, "can't get dss1_fck\n");
clk_put(dispc.dss_ick);
return PTR_ERR(dispc.dss1_fck);
}
if (IS_ERR((dispc.dss_54m_fck =
clk_get(dispc.fbdev->dev, "dss_54m_fck")))) {
dev_err(dispc.fbdev->dev, "can't get dss_54m_fck");
dev_err(dispc.fbdev->dev, "can't get dss_54m_fck\n");
clk_put(dispc.dss_ick);
clk_put(dispc.dss1_fck);
return PTR_ERR(dispc.dss_54m_fck);

2
drivers/video/omap/hwa742.c
View File

@ -508,7 +508,7 @@ int hwa742_update_window_async(struct fb_info *fbi,
if (unlikely(win->format &
~(0x03 | OMAPFB_FORMAT_FLAG_DOUBLE |
OMAPFB_FORMAT_FLAG_TEARSYNC | OMAPFB_FORMAT_FLAG_FORCE_VSYNC))) {
dev_dbg(hwa742.fbdev->dev, "invalid window flag");
dev_dbg(hwa742.fbdev->dev, "invalid window flag\n");
r = -EINVAL;
goto out;
}

4
drivers/video/omap/rfbi.c
View File

@ -84,12 +84,12 @@ static inline u32 rfbi_read_reg(int idx)
static int rfbi_get_clocks(void)
{
if (IS_ERR((rfbi.dss_ick = clk_get(rfbi.fbdev->dev, "dss_ick")))) {
dev_err(rfbi.fbdev->dev, "can't get dss_ick");
dev_err(rfbi.fbdev->dev, "can't get dss_ick\n");
return PTR_ERR(rfbi.dss_ick);
}
if (IS_ERR((rfbi.dss1_fck = clk_get(rfbi.fbdev->dev, "dss1_fck")))) {
dev_err(rfbi.fbdev->dev, "can't get dss1_fck");
dev_err(rfbi.fbdev->dev, "can't get dss1_fck\n");
clk_put(rfbi.dss_ick);
return PTR_ERR(rfbi.dss1_fck);
}

2
drivers/w1/masters/ds1wm.c
View File

@ -307,7 +307,7 @@ static void ds1wm_search(void *data, u8 search_type,
rom_id |= (unsigned long long) r << (i * 4);
}
dev_dbg(&ds1wm_data->pdev->dev, "found 0x%08llX", rom_id);
dev_dbg(&ds1wm_data->pdev->dev, "found 0x%08llX\n", rom_id);
ds1wm_write_register(ds1wm_data, DS1WM_CMD, ~DS1WM_CMD_SRA);
ds1wm_reset(ds1wm_data);

5
drivers/xen/xenbus/xenbus_probe.c
View File

@ -185,13 +185,14 @@ static void otherend_changed(struct xenbus_watch *watch,
if (!dev->otherend ||
strncmp(dev->otherend, vec[XS_WATCH_PATH],
strlen(dev->otherend))) {
dev_dbg(&dev->dev, "Ignoring watch at %s", vec[XS_WATCH_PATH]);
dev_dbg(&dev->dev, "Ignoring watch at %s\n",
vec[XS_WATCH_PATH]);
return;
}
state = xenbus_read_driver_state(dev->otherend);
dev_dbg(&dev->dev, "state is %d, (%s), %s, %s",
dev_dbg(&dev->dev, "state is %d, (%s), %s, %s\n",
state, xenbus_strstate(state), dev->otherend_watch.node,
vec[XS_WATCH_PATH]);

4
sound/arm/aaci.c
View File

@ -209,7 +209,7 @@ static void aaci_fifo_irq(struct aaci *aaci, int channel, u32 mask)
void *ptr;
if (!aacirun->substream || !aacirun->start) {
dev_warn(&aaci->dev->dev, "RX interrupt???");
dev_warn(&aaci->dev->dev, "RX interrupt???\n");
writel(0, aacirun->base + AACI_IE);
return;
}
@ -263,7 +263,7 @@ static void aaci_fifo_irq(struct aaci *aaci, int channel, u32 mask)
void *ptr;
if (!aacirun->substream || !aacirun->start) {
dev_warn(&aaci->dev->dev, "TX interrupt???");
dev_warn(&aaci->dev->dev, "TX interrupt???\n");
writel(0, aacirun->base + AACI_IE);
return;
}