Staging: et131x: config is already zeroed

Adapter was cleared by netdev allocation so any zero defaults do not need
writing.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Alan Cox 2009-08-27 11:00:14 +01:00 committed by Greg Kroah-Hartman
parent 9483146369
commit 8d0e4fd405

View File

@ -101,58 +101,30 @@ extern dbg_info_t *et131x_dbginfo;
#endif /* CONFIG_ET131X_DEBUG */
/* Defines for Parameter Default/Min/Max vaules */
#define PARM_SPEED_DUPLEX_DEF 0
#define PARM_SPEED_DUPLEX_MIN 0
#define PARM_SPEED_DUPLEX_MAX 5
#define PARM_FLOW_CTL_DEF 0
#define PARM_FLOW_CTL_MIN 0
#define PARM_FLOW_CTL_MAX 3
#define PARM_JUMBO_PKT_DEF 1514
#define PARM_JUMBO_PKT_MIN 1514
#define PARM_JUMBO_PKT_MAX 9216
#define PARM_PHY_COMA_DEF 0
#define PARM_PHY_COMA_MIN 0
#define PARM_PHY_COMA_MAX 1
#define PARM_SC_GAIN_DEF 7
#define PARM_SC_GAIN_MIN 0
#define PARM_SC_GAIN_MAX 7
#define PARM_PM_WOL_DEF 0
#define PARM_PM_WOL_MIN 0
#define PARM_PM_WOL_MAX 1
#define PARM_NMI_DISABLE_DEF 0
#define PARM_NMI_DISABLE_MIN 0
#define PARM_NMI_DISABLE_MAX 2
/* Module parameter for disabling NMI
* et131x_speed_set :
* Set Link speed and dublex manually (0-5) [0]
* 1 : 10Mb Half-Duplex
* 2 : 10Mb Full-Duplex
* 3 : 100Mb Half-Duplex
* 4 : 100Mb Full-Duplex
* 5 : 1000Mb Full-Duplex
* 0 : Auto Speed Auto Dublex // default
*/
static u32 et131x_nmi_disable = PARM_NMI_DISABLE_DEF;
module_param(et131x_nmi_disable, uint, 0);
MODULE_PARM_DESC(et131x_nmi_disable, "Disable NMI (0-2) [0]");
/* Module parameter for manual speed setting
* et131x_nmi_disable :
* Disable NMI (0-2) [0]
* 0 :
* 1 :
* 2 :
*/
static u32 et131x_speed_set = PARM_SPEED_DUPLEX_DEF;
static u32 et131x_nmi_disable; /* 0-2 */
module_param(et131x_nmi_disable, uint, 0);
MODULE_PARM_DESC(et131x_nmi_disable, "Disable NMI (0-2) [0]");
/* Module parameter for manual speed setting
* Set Link speed and dublex manually (0-5) [0]
* 1 : 10Mb Half-Duplex
* 2 : 10Mb Full-Duplex
* 3 : 100Mb Half-Duplex
* 4 : 100Mb Full-Duplex
* 5 : 1000Mb Full-Duplex
* 0 : Auto Speed Auto Duplex // default
*/
static u32 et131x_speed_set;
module_param(et131x_speed_set, uint, 0);
MODULE_PARM_DESC(et131x_speed_set,
"Set Link speed and dublex manually (0-5) [0] \n 1 : 10Mb Half-Duplex \n 2 : 10Mb Full-Duplex \n 3 : 100Mb Half-Duplex \n 4 : 100Mb Full-Duplex \n 5 : 1000Mb Full-Duplex \n 0 : Auto Speed Auto Dublex");
@ -175,33 +147,22 @@ void et131x_config_parse(struct et131x_adapter *etdev)
DBG_ENTER(et131x_dbginfo);
etdev->SpeedDuplex = et131x_speed_set;
if (et131x_speed_set < PARM_SPEED_DUPLEX_MIN ||
et131x_speed_set > PARM_SPEED_DUPLEX_MAX) {
dev_warn(&etdev->pdev->dev, "invalid speed setting ignored.\n");
et131x_speed_set = PARM_SPEED_DUPLEX_DEF;
et131x_speed_set = 0;
}
else if (et131x_speed_set != PARM_SPEED_DUPLEX_DEF)
else if (et131x_speed_set)
DBG_VERBOSE(et131x_dbginfo, "Speed set manually to : %d \n",
et131x_speed_set);
/* etdev->SpeedDuplex = PARM_SPEED_DUPLEX_DEF; */
etdev->SpeedDuplex = et131x_speed_set;
etdev->RegistryJumboPacket = 1514; /* 1514-9216 */
etdev->RegistryFlowControl = PARM_FLOW_CTL_DEF;
etdev->RegistryJumboPacket = PARM_JUMBO_PKT_DEF;
etdev->RegistryPhyComa = PARM_PHY_COMA_DEF;
if (et131x_nmi_disable != PARM_NMI_DISABLE_DEF)
etdev->RegistryNMIDisable = et131x_nmi_disable;
else
etdev->RegistryNMIDisable = PARM_NMI_DISABLE_DEF;
etdev->RegistryPhyLoopbk = 0; /* 0 off 1 on */
etdev->RegistryNMIDisable = et131x_nmi_disable;
/* Set the MAC address to a default */
memcpy(etdev->CurrentAddress, default_mac, ETH_ALEN);
etdev->bOverrideAddress = false;
/* Decode SpeedDuplex
*