mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-14 21:01:29 +00:00
tcp: tsq: restore minimal amount of queueing
After commitc9eeec26e3
("tcp: TSQ can use a dynamic limit"), several users reported throughput regressions, notably on mvneta and wifi adapters. 802.11 AMPDU requires a fair amount of queueing to be effective. This patch partially reverts the change done in tcp_write_xmit() so that the minimal amount is sysctl_tcp_limit_output_bytes. It also remove the use of this sysctl while building skb stored in write queue, as TSO autosizing does the right thing anyway. Users with well behaving NICS and correct qdisc (like sch_fq), can then lower the default sysctl_tcp_limit_output_bytes value from 128KB to 8KB. This new usage of sysctl_tcp_limit_output_bytes permits each driver authors to check how their driver performs when/if the value is set to a minimum of 4KB. Normally, line rate for a single TCP flow should be possible, but some drivers rely on timers to perform TX completion and too long TX completion delays prevent reaching full throughput. Fixes:c9eeec26e3
("tcp: TSQ can use a dynamic limit") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Sujith Manoharan <sujith@msujith.org> Reported-by: Arnaud Ebalard <arno@natisbad.org> Tested-by: Sujith Manoharan <sujith@msujith.org> Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
6afae6457b
commit
98e09386c0
@ -577,9 +577,6 @@ tcp_limit_output_bytes - INTEGER
|
||||
typical pfifo_fast qdiscs.
|
||||
tcp_limit_output_bytes limits the number of bytes on qdisc
|
||||
or device to reduce artificial RTT/cwnd and reduce bufferbloat.
|
||||
Note: For GSO/TSO enabled flows, we try to have at least two
|
||||
packets in flight. Reducing tcp_limit_output_bytes might also
|
||||
reduce the size of individual GSO packet (64KB being the max)
|
||||
Default: 131072
|
||||
|
||||
tcp_challenge_ack_limit - INTEGER
|
||||
|
@ -808,12 +808,6 @@ static unsigned int tcp_xmit_size_goal(struct sock *sk, u32 mss_now,
|
||||
xmit_size_goal = min_t(u32, gso_size,
|
||||
sk->sk_gso_max_size - 1 - hlen);
|
||||
|
||||
/* TSQ : try to have at least two segments in flight
|
||||
* (one in NIC TX ring, another in Qdisc)
|
||||
*/
|
||||
xmit_size_goal = min_t(u32, xmit_size_goal,
|
||||
sysctl_tcp_limit_output_bytes >> 1);
|
||||
|
||||
xmit_size_goal = tcp_bound_to_half_wnd(tp, xmit_size_goal);
|
||||
|
||||
/* We try hard to avoid divides here */
|
||||
|
@ -1875,8 +1875,12 @@ static bool tcp_write_xmit(struct sock *sk, unsigned int mss_now, int nonagle,
|
||||
* - better RTT estimation and ACK scheduling
|
||||
* - faster recovery
|
||||
* - high rates
|
||||
* Alas, some drivers / subsystems require a fair amount
|
||||
* of queued bytes to ensure line rate.
|
||||
* One example is wifi aggregation (802.11 AMPDU)
|
||||
*/
|
||||
limit = max(skb->truesize, sk->sk_pacing_rate >> 10);
|
||||
limit = max_t(unsigned int, sysctl_tcp_limit_output_bytes,
|
||||
sk->sk_pacing_rate >> 10);
|
||||
|
||||
if (atomic_read(&sk->sk_wmem_alloc) > limit) {
|
||||
set_bit(TSQ_THROTTLED, &tp->tsq_flags);
|
||||
|
Loading…
Reference in New Issue
Block a user