net: phy: at803x: Request 'reset' GPIO only for AT8030 PHY

This removes the dependency on GPIOLIB for non faulty PHYs.

Indeed, without this patch, if GPIOLIB is not selected
devm_gpiod_get_optional() will return -ENOSYS and the driver probe
call will fail, regardless of the actual PHY hardware.

Out of the 3 PHYs supported by this driver (AT8030, AT8031, AT8035),
only AT8030 presents the issues that commit 13a56b4493 ("net: phy:
at803x: Add support for hardware reset") attempts to work-around by
using a 'reset' GPIO line.

Hence, only AT8030 should depend on GPIOLIB operating properly.

Fixes: 13a56b4493 ("net: phy: at803x: Add support for hardware reset")

Signed-off-by: Sebastian Frias <sf84@laposte.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Sebastian Frias 2016-03-23 11:49:09 +01:00 committed by David S. Miller
parent d57019d185
commit 9eb13f65c3

View File

@ -277,12 +277,16 @@ static int at803x_probe(struct phy_device *phydev)
if (!priv)
return -ENOMEM;
if (phydev->drv->phy_id != ATH8030_PHY_ID)
goto does_not_require_reset_workaround;
gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(gpiod_reset))
return PTR_ERR(gpiod_reset);
priv->gpiod_reset = gpiod_reset;
does_not_require_reset_workaround:
phydev->priv = priv;
return 0;