mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-26 03:17:48 +00:00
Staging: comedi: add dt2601 driver
Driver for DataTranslation DT2801 From: David Schleef <ds@schleef.org> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
David Schleef
Greg Kroah-Hartman
parent
d1d3cb329c
commit
a4c879482e
693
drivers/staging/comedi/drivers/dt2801.c
Normal file
693
drivers/staging/comedi/drivers/dt2801.c
Normal file
@ -0,0 +1,693 @@
|
||||
/*
|
||||
* comedi/drivers/dt2801.c
|
||||
* Device Driver for DataTranslation DT2801
|
||||
*
|
||||
*/
|
||||
/*
|
||||
Driver: dt2801
|
||||
Description: Data Translation DT2801 series and DT01-EZ
|
||||
Author: ds
|
||||
Status: works
|
||||
Devices: [Data Translation] DT2801 (dt2801), DT2801-A, DT2801/5716A,
|
||||
DT2805, DT2805/5716A, DT2808, DT2818, DT2809, DT01-EZ
|
||||
|
||||
This driver can autoprobe the type of board.
|
||||
|
||||
Configuration options:
|
||||
[0] - I/O port base address
|
||||
[1] - unused
|
||||
[2] - A/D reference 0=differential, 1=single-ended
|
||||
[3] - A/D range
|
||||
0 = [-10,10]
|
||||
1 = [0,10]
|
||||
[4] - D/A 0 range
|
||||
0 = [-10,10]
|
||||
1 = [-5,5]
|
||||
2 = [-2.5,2.5]
|
||||
3 = [0,10]
|
||||
4 = [0,5]
|
||||
[5] - D/A 1 range (same choices)
|
||||
*/
|
||||
|
||||
#include "../comedidev.h"
|
||||
#include <linux/delay.h>
|
||||
#include <linux/ioport.h>
|
||||
|
||||
#define DT2801_TIMEOUT 1000
|
||||
|
||||
/* Hardware Configuration */
|
||||
/* ====================== */
|
||||
|
||||
#define DT2801_MAX_DMA_SIZE (64 * 1024)
|
||||
|
||||
/* Ports */
|
||||
#define DT2801_IOSIZE 2
|
||||
|
||||
/* define's & typedef's */
|
||||
/* ====================== */
|
||||
|
||||
/* Commands */
|
||||
#define DT_C_RESET 0x0
|
||||
#define DT_C_CLEAR_ERR 0x1
|
||||
#define DT_C_READ_ERRREG 0x2
|
||||
#define DT_C_SET_CLOCK 0x3
|
||||
|
||||
#define DT_C_TEST 0xb
|
||||
#define DT_C_STOP 0xf
|
||||
|
||||
#define DT_C_SET_DIGIN 0x4
|
||||
#define DT_C_SET_DIGOUT 0x5
|
||||
#define DT_C_READ_DIG 0x6
|
||||
#define DT_C_WRITE_DIG 0x7
|
||||
|
||||
#define DT_C_WRITE_DAIM 0x8
|
||||
#define DT_C_SET_DA 0x9
|
||||
#define DT_C_WRITE_DA 0xa
|
||||
|
||||
#define DT_C_READ_ADIM 0xc
|
||||
#define DT_C_SET_AD 0xd
|
||||
#define DT_C_READ_AD 0xe
|
||||
|
||||
/* Command modifiers (only used with read/write), EXTTRIG can be
|
||||
used with some other commands.
|
||||
*/
|
||||
#define DT_MOD_DMA (1<<4)
|
||||
#define DT_MOD_CONT (1<<5)
|
||||
#define DT_MOD_EXTCLK (1<<6)
|
||||
#define DT_MOD_EXTTRIG (1<<7)
|
||||
|
||||
/* Bits in status register */
|
||||
#define DT_S_DATA_OUT_READY (1<<0)
|
||||
#define DT_S_DATA_IN_FULL (1<<1)
|
||||
#define DT_S_READY (1<<2)
|
||||
#define DT_S_COMMAND (1<<3)
|
||||
#define DT_S_COMPOSITE_ERROR (1<<7)
|
||||
|
||||
/* registers */
|
||||
#define DT2801_DATA 0
|
||||
#define DT2801_STATUS 1
|
||||
#define DT2801_CMD 1
|
||||
|
||||
static int dt2801_attach(comedi_device * dev, comedi_devconfig * it);
|
||||
static int dt2801_detach(comedi_device * dev);
|
||||
static comedi_driver driver_dt2801 = {
|
||||
driver_name:"dt2801",
|
||||
module:THIS_MODULE,
|
||||
attach:dt2801_attach,
|
||||
detach:dt2801_detach,
|
||||
};
|
||||
|
||||
COMEDI_INITCLEANUP(driver_dt2801);
|
||||
|
||||
#if 0
|
||||
// ignore 'defined but not used' warning
|
||||
static const comedi_lrange range_dt2801_ai_pgh_bipolar = { 4, {
|
||||
RANGE(-10, 10),
|
||||
RANGE(-5, 5),
|
||||
RANGE(-2.5, 2.5),
|
||||
RANGE(-1.25, 1.25),
|
||||
}
|
||||
};
|
||||
#endif
|
||||
static const comedi_lrange range_dt2801_ai_pgl_bipolar = { 4, {
|
||||
RANGE(-10, 10),
|
||||
RANGE(-1, 1),
|
||||
RANGE(-0.1, 0.1),
|
||||
RANGE(-0.02, 0.02),
|
||||
}
|
||||
};
|
||||
|
||||
#if 0
|
||||
// ignore 'defined but not used' warning
|
||||
static const comedi_lrange range_dt2801_ai_pgh_unipolar = { 4, {
|
||||
RANGE(0, 10),
|
||||
RANGE(0, 5),
|
||||
RANGE(0, 2.5),
|
||||
RANGE(0, 1.25),
|
||||
}
|
||||
};
|
||||
#endif
|
||||
static const comedi_lrange range_dt2801_ai_pgl_unipolar = { 4, {
|
||||
RANGE(0, 10),
|
||||
RANGE(0, 1),
|
||||
RANGE(0, 0.1),
|
||||
RANGE(0, 0.02),
|
||||
}
|
||||
};
|
||||
|
||||
typedef struct {
|
||||
const char *name;
|
||||
int boardcode;
|
||||
int ad_diff;
|
||||
int ad_chan;
|
||||
int adbits;
|
||||
int adrangetype;
|
||||
int dabits;
|
||||
} boardtype_t;
|
||||
|
||||
/* Typeid's for the different boards of the DT2801-series
|
||||
(taken from the test-software, that comes with the board)
|
||||
*/
|
||||
static const boardtype_t boardtypes[] = {
|
||||
{
|
||||
name: "dt2801",
|
||||
boardcode:0x09,
|
||||
ad_diff: 2,
|
||||
ad_chan: 16,
|
||||
adbits: 12,
|
||||
adrangetype:0,
|
||||
dabits: 12},
|
||||
{
|
||||
name: "dt2801-a",
|
||||
boardcode:0x52,
|
||||
ad_diff: 2,
|
||||
ad_chan: 16,
|
||||
adbits: 12,
|
||||
adrangetype:0,
|
||||
dabits: 12},
|
||||
{
|
||||
name: "dt2801/5716a",
|
||||
boardcode:0x82,
|
||||
ad_diff: 1,
|
||||
ad_chan: 16,
|
||||
adbits: 16,
|
||||
adrangetype:1,
|
||||
dabits: 12},
|
||||
{
|
||||
name: "dt2805",
|
||||
boardcode:0x12,
|
||||
ad_diff: 1,
|
||||
ad_chan: 16,
|
||||
adbits: 12,
|
||||
adrangetype:0,
|
||||
dabits: 12},
|
||||
{
|
||||
name: "dt2805/5716a",
|
||||
boardcode:0x92,
|
||||
ad_diff: 1,
|
||||
ad_chan: 16,
|
||||
adbits: 16,
|
||||
adrangetype:1,
|
||||
dabits: 12},
|
||||
{
|
||||
name: "dt2808",
|
||||
boardcode:0x20,
|
||||
ad_diff: 0,
|
||||
ad_chan: 16,
|
||||
adbits: 12,
|
||||
adrangetype:2,
|
||||
dabits: 8},
|
||||
{
|
||||
name: "dt2818",
|
||||
boardcode:0xa2,
|
||||
ad_diff: 0,
|
||||
ad_chan: 4,
|
||||
adbits: 12,
|
||||
adrangetype:0,
|
||||
dabits: 12},
|
||||
{
|
||||
name: "dt2809",
|
||||
boardcode:0xb0,
|
||||
ad_diff: 0,
|
||||
ad_chan: 8,
|
||||
adbits: 12,
|
||||
adrangetype:1,
|
||||
dabits: 12},
|
||||
};
|
||||
|
||||
#define n_boardtypes ((sizeof(boardtypes))/(sizeof(boardtypes[0])))
|
||||
#define boardtype (*(const boardtype_t *)dev->board_ptr)
|
||||
|
||||
typedef struct {
|
||||
const comedi_lrange *dac_range_types[2];
|
||||
lsampl_t ao_readback[2];
|
||||
} dt2801_private;
|
||||
#define devpriv ((dt2801_private *)dev->private)
|
||||
|
||||
static int dt2801_ai_insn_read(comedi_device * dev, comedi_subdevice * s,
|
||||
comedi_insn * insn, lsampl_t * data);
|
||||
static int dt2801_ao_insn_read(comedi_device * dev, comedi_subdevice * s,
|
||||
comedi_insn * insn, lsampl_t * data);
|
||||
static int dt2801_ao_insn_write(comedi_device * dev, comedi_subdevice * s,
|
||||
comedi_insn * insn, lsampl_t * data);
|
||||
static int dt2801_dio_insn_bits(comedi_device * dev, comedi_subdevice * s,
|
||||
comedi_insn * insn, lsampl_t * data);
|
||||
static int dt2801_dio_insn_config(comedi_device * dev, comedi_subdevice * s,
|
||||
comedi_insn * insn, lsampl_t * data);
|
||||
|
||||
/* These are the low-level routines:
|
||||
writecommand: write a command to the board
|
||||
writedata: write data byte
|
||||
readdata: read data byte
|
||||
*/
|
||||
|
||||
/* Only checks DataOutReady-flag, not the Ready-flag as it is done
|
||||
in the examples of the manual. I don't see why this should be
|
||||
necessary. */
|
||||
static int dt2801_readdata(comedi_device * dev, int *data)
|
||||
{
|
||||
int stat = 0;
|
||||
int timeout = DT2801_TIMEOUT;
|
||||
|
||||
do {
|
||||
stat = inb_p(dev->iobase + DT2801_STATUS);
|
||||
if (stat & (DT_S_COMPOSITE_ERROR | DT_S_READY)) {
|
||||
return stat;
|
||||
}
|
||||
if (stat & DT_S_DATA_OUT_READY) {
|
||||
*data = inb_p(dev->iobase + DT2801_DATA);
|
||||
return 0;
|
||||
}
|
||||
} while (--timeout > 0);
|
||||
|
||||
return -ETIME;
|
||||
}
|
||||
|
||||
static int dt2801_readdata2(comedi_device * dev, int *data)
|
||||
{
|
||||
int lb, hb;
|
||||
int ret;
|
||||
|
||||
ret = dt2801_readdata(dev, &lb);
|
||||
if (ret)
|
||||
return ret;
|
||||
ret = dt2801_readdata(dev, &hb);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
*data = (hb << 8) + lb;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int dt2801_writedata(comedi_device * dev, unsigned int data)
|
||||
{
|
||||
int stat = 0;
|
||||
int timeout = DT2801_TIMEOUT;
|
||||
|
||||
do {
|
||||
stat = inb_p(dev->iobase + DT2801_STATUS);
|
||||
|
||||
if (stat & DT_S_COMPOSITE_ERROR) {
|
||||
return stat;
|
||||
}
|
||||
if (!(stat & DT_S_DATA_IN_FULL)) {
|
||||
outb_p(data & 0xff, dev->iobase + DT2801_DATA);
|
||||
return 0;
|
||||
}
|
||||
#if 0
|
||||
if (stat & DT_S_READY) {
|
||||
printk("dt2801: ready flag set (bad!) in dt2801_writedata()\n");
|
||||
return -EIO;
|
||||
}
|
||||
#endif
|
||||
} while (--timeout > 0);
|
||||
|
||||
return -ETIME;
|
||||
}
|
||||
|
||||
static int dt2801_writedata2(comedi_device * dev, unsigned int data)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = dt2801_writedata(dev, data & 0xff);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
ret = dt2801_writedata(dev, (data >> 8));
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int dt2801_wait_for_ready(comedi_device * dev)
|
||||
{
|
||||
int timeout = DT2801_TIMEOUT;
|
||||
int stat;
|
||||
|
||||
stat = inb_p(dev->iobase + DT2801_STATUS);
|
||||
if (stat & DT_S_READY) {
|
||||
return 0;
|
||||
}
|
||||
do {
|
||||
stat = inb_p(dev->iobase + DT2801_STATUS);
|
||||
|
||||
if (stat & DT_S_COMPOSITE_ERROR) {
|
||||
return stat;
|
||||
}
|
||||
if (stat & DT_S_READY) {
|
||||
return 0;
|
||||
}
|
||||
} while (--timeout > 0);
|
||||
|
||||
return -ETIME;
|
||||
}
|
||||
|
||||
static int dt2801_writecmd(comedi_device * dev, int command)
|
||||
{
|
||||
int stat;
|
||||
|
||||
dt2801_wait_for_ready(dev);
|
||||
|
||||
stat = inb_p(dev->iobase + DT2801_STATUS);
|
||||
if (stat & DT_S_COMPOSITE_ERROR) {
|
||||
printk("dt2801: composite-error in dt2801_writecmd(), ignoring\n");
|
||||
}
|
||||
if (!(stat & DT_S_READY)) {
|
||||
printk("dt2801: !ready in dt2801_writecmd(), ignoring\n");
|
||||
}
|
||||
outb_p(command, dev->iobase + DT2801_CMD);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int dt2801_reset(comedi_device * dev)
|
||||
{
|
||||
int board_code = 0;
|
||||
unsigned int stat;
|
||||
int timeout;
|
||||
|
||||
DPRINTK("dt2801: resetting board...\n");
|
||||
DPRINTK("fingerprint: 0x%02x 0x%02x\n", inb_p(dev->iobase),
|
||||
inb_p(dev->iobase + 1));
|
||||
|
||||
/* pull random data from data port */
|
||||
inb_p(dev->iobase + DT2801_DATA);
|
||||
inb_p(dev->iobase + DT2801_DATA);
|
||||
inb_p(dev->iobase + DT2801_DATA);
|
||||
inb_p(dev->iobase + DT2801_DATA);
|
||||
|
||||
DPRINTK("dt2801: stop\n");
|
||||
//dt2801_writecmd(dev,DT_C_STOP);
|
||||
outb_p(DT_C_STOP, dev->iobase + DT2801_CMD);
|
||||
|
||||
//dt2801_wait_for_ready(dev);
|
||||
comedi_udelay(100);
|
||||
timeout = 10000;
|
||||
do {
|
||||
stat = inb_p(dev->iobase + DT2801_STATUS);
|
||||
if (stat & DT_S_READY)
|
||||
break;
|
||||
} while (timeout--);
|
||||
if (!timeout) {
|
||||
printk("dt2801: timeout 1 status=0x%02x\n", stat);
|
||||
}
|
||||
//printk("dt2801: reading dummy\n");
|
||||
//dt2801_readdata(dev,&board_code);
|
||||
|
||||
DPRINTK("dt2801: reset\n");
|
||||
outb_p(DT_C_RESET, dev->iobase + DT2801_CMD);
|
||||
//dt2801_writecmd(dev,DT_C_RESET);
|
||||
|
||||
comedi_udelay(100);
|
||||
timeout = 10000;
|
||||
do {
|
||||
stat = inb_p(dev->iobase + DT2801_STATUS);
|
||||
if (stat & DT_S_READY)
|
||||
break;
|
||||
} while (timeout--);
|
||||
if (!timeout) {
|
||||
printk("dt2801: timeout 2 status=0x%02x\n", stat);
|
||||
}
|
||||
|
||||
DPRINTK("dt2801: reading code\n");
|
||||
dt2801_readdata(dev, &board_code);
|
||||
|
||||
DPRINTK("dt2801: ok. code=0x%02x\n", board_code);
|
||||
|
||||
return board_code;
|
||||
}
|
||||
|
||||
static int probe_number_of_ai_chans(comedi_device * dev)
|
||||
{
|
||||
int n_chans;
|
||||
int stat;
|
||||
int data;
|
||||
|
||||
for (n_chans = 0; n_chans < 16; n_chans++) {
|
||||
stat = dt2801_writecmd(dev, DT_C_READ_ADIM);
|
||||
dt2801_writedata(dev, 0);
|
||||
dt2801_writedata(dev, n_chans);
|
||||
stat = dt2801_readdata2(dev, &data);
|
||||
|
||||
if (stat)
|
||||
break;
|
||||
}
|
||||
|
||||
dt2801_reset(dev);
|
||||
dt2801_reset(dev);
|
||||
|
||||
return n_chans;
|
||||
}
|
||||
|
||||
static const comedi_lrange *dac_range_table[] = {
|
||||
&range_bipolar10,
|
||||
&range_bipolar5,
|
||||
&range_bipolar2_5,
|
||||
&range_unipolar10,
|
||||
&range_unipolar5
|
||||
};
|
||||
|
||||
static const comedi_lrange *dac_range_lkup(int opt)
|
||||
{
|
||||
if (opt < 0 || opt > 5)
|
||||
return &range_unknown;
|
||||
return dac_range_table[opt];
|
||||
}
|
||||
|
||||
static const comedi_lrange *ai_range_lkup(int type, int opt)
|
||||
{
|
||||
switch (type) {
|
||||
case 0:
|
||||
return (opt) ?
|
||||
&range_dt2801_ai_pgl_unipolar :
|
||||
&range_dt2801_ai_pgl_bipolar;
|
||||
case 1:
|
||||
return (opt) ? &range_unipolar10 : &range_bipolar10;
|
||||
case 2:
|
||||
return &range_unipolar5;
|
||||
}
|
||||
return &range_unknown;
|
||||
}
|
||||
|
||||
/*
|
||||
options:
|
||||
[0] - i/o base
|
||||
[1] - unused
|
||||
[2] - a/d 0=differential, 1=single-ended
|
||||
[3] - a/d range 0=[-10,10], 1=[0,10]
|
||||
[4] - dac0 range 0=[-10,10], 1=[-5,5], 2=[-2.5,2.5] 3=[0,10], 4=[0,5]
|
||||
[5] - dac1 range 0=[-10,10], 1=[-5,5], 2=[-2.5,2.5] 3=[0,10], 4=[0,5]
|
||||
*/
|
||||
static int dt2801_attach(comedi_device * dev, comedi_devconfig * it)
|
||||
{
|
||||
comedi_subdevice *s;
|
||||
unsigned long iobase;
|
||||
int board_code, type;
|
||||
int ret = 0;
|
||||
int n_ai_chans;
|
||||
|
||||
iobase = it->options[0];
|
||||
if (!request_region(iobase, DT2801_IOSIZE, "dt2801")) {
|
||||
comedi_error(dev, "I/O port conflict");
|
||||
return -EIO;
|
||||
}
|
||||
dev->iobase = iobase;
|
||||
|
||||
/* do some checking */
|
||||
|
||||
board_code = dt2801_reset(dev);
|
||||
|
||||
/* heh. if it didn't work, try it again. */
|
||||
if (!board_code)
|
||||
board_code = dt2801_reset(dev);
|
||||
|
||||
for (type = 0; type < n_boardtypes; type++) {
|
||||
if (boardtypes[type].boardcode == board_code)
|
||||
goto havetype;
|
||||
}
|
||||
printk("dt2801: unrecognized board code=0x%02x, contact author\n",
|
||||
board_code);
|
||||
type = 0;
|
||||
|
||||
havetype:
|
||||
dev->board_ptr = boardtypes + type;
|
||||
printk("dt2801: %s at port 0x%lx", boardtype.name, iobase);
|
||||
|
||||
n_ai_chans = probe_number_of_ai_chans(dev);
|
||||
printk(" (ai channels = %d)", n_ai_chans);
|
||||
|
||||
if ((ret = alloc_subdevices(dev, 4)) < 0)
|
||||
goto out;
|
||||
|
||||
if ((ret = alloc_private(dev, sizeof(dt2801_private))) < 0)
|
||||
goto out;
|
||||
|
||||
dev->board_name = boardtype.name;
|
||||
|
||||
s = dev->subdevices + 0;
|
||||
/* ai subdevice */
|
||||
s->type = COMEDI_SUBD_AI;
|
||||
s->subdev_flags = SDF_READABLE | SDF_GROUND;
|
||||
#if 1
|
||||
s->n_chan = n_ai_chans;
|
||||
#else
|
||||
if (it->options[2])
|
||||
s->n_chan = boardtype.ad_chan;
|
||||
else
|
||||
s->n_chan = boardtype.ad_chan / 2;
|
||||
#endif
|
||||
s->maxdata = (1 << boardtype.adbits) - 1;
|
||||
s->range_table = ai_range_lkup(boardtype.adrangetype, it->options[3]);
|
||||
s->insn_read = dt2801_ai_insn_read;
|
||||
|
||||
s++;
|
||||
/* ao subdevice */
|
||||
s->type = COMEDI_SUBD_AO;
|
||||
s->subdev_flags = SDF_WRITABLE;
|
||||
s->n_chan = 2;
|
||||
s->maxdata = (1 << boardtype.dabits) - 1;
|
||||
s->range_table_list = devpriv->dac_range_types;
|
||||
devpriv->dac_range_types[0] = dac_range_lkup(it->options[4]);
|
||||
devpriv->dac_range_types[1] = dac_range_lkup(it->options[5]);
|
||||
s->insn_read = dt2801_ao_insn_read;
|
||||
s->insn_write = dt2801_ao_insn_write;
|
||||
|
||||
s++;
|
||||
/* 1st digital subdevice */
|
||||
s->type = COMEDI_SUBD_DIO;
|
||||
s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
|
||||
s->n_chan = 8;
|
||||
s->maxdata = 1;
|
||||
s->range_table = &range_digital;
|
||||
s->insn_bits = dt2801_dio_insn_bits;
|
||||
s->insn_config = dt2801_dio_insn_config;
|
||||
|
||||
s++;
|
||||
/* 2nd digital subdevice */
|
||||
s->type = COMEDI_SUBD_DIO;
|
||||
s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
|
||||
s->n_chan = 8;
|
||||
s->maxdata = 1;
|
||||
s->range_table = &range_digital;
|
||||
s->insn_bits = dt2801_dio_insn_bits;
|
||||
s->insn_config = dt2801_dio_insn_config;
|
||||
|
||||
ret = 0;
|
||||
out:
|
||||
printk("\n");
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int dt2801_detach(comedi_device * dev)
|
||||
{
|
||||
if (dev->iobase)
|
||||
release_region(dev->iobase, DT2801_IOSIZE);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int dt2801_error(comedi_device * dev, int stat)
|
||||
{
|
||||
if (stat < 0) {
|
||||
if (stat == -ETIME) {
|
||||
printk("dt2801: timeout\n");
|
||||
} else {
|
||||
printk("dt2801: error %d\n", stat);
|
||||
}
|
||||
return stat;
|
||||
}
|
||||
printk("dt2801: error status 0x%02x, resetting...\n", stat);
|
||||
|
||||
dt2801_reset(dev);
|
||||
dt2801_reset(dev);
|
||||
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
static int dt2801_ai_insn_read(comedi_device * dev, comedi_subdevice * s,
|
||||
comedi_insn * insn, lsampl_t * data)
|
||||
{
|
||||
int d;
|
||||
int stat;
|
||||
int i;
|
||||
|
||||
for (i = 0; i < insn->n; i++) {
|
||||
stat = dt2801_writecmd(dev, DT_C_READ_ADIM);
|
||||
dt2801_writedata(dev, CR_RANGE(insn->chanspec));
|
||||
dt2801_writedata(dev, CR_CHAN(insn->chanspec));
|
||||
stat = dt2801_readdata2(dev, &d);
|
||||
|
||||
if (stat != 0)
|
||||
return dt2801_error(dev, stat);
|
||||
|
||||
data[i] = d;
|
||||
}
|
||||
|
||||
return i;
|
||||
}
|
||||
|
||||
static int dt2801_ao_insn_read(comedi_device * dev, comedi_subdevice * s,
|
||||
comedi_insn * insn, lsampl_t * data)
|
||||
{
|
||||
data[0] = devpriv->ao_readback[CR_CHAN(insn->chanspec)];
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
static int dt2801_ao_insn_write(comedi_device * dev, comedi_subdevice * s,
|
||||
comedi_insn * insn, lsampl_t * data)
|
||||
{
|
||||
dt2801_writecmd(dev, DT_C_WRITE_DAIM);
|
||||
dt2801_writedata(dev, CR_CHAN(insn->chanspec));
|
||||
dt2801_writedata2(dev, data[0]);
|
||||
|
||||
devpriv->ao_readback[CR_CHAN(insn->chanspec)] = data[0];
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
static int dt2801_dio_insn_bits(comedi_device * dev, comedi_subdevice * s,
|
||||
comedi_insn * insn, lsampl_t * data)
|
||||
{
|
||||
int which = 0;
|
||||
|
||||
if (s == dev->subdevices + 4)
|
||||
which = 1;
|
||||
|
||||
if (insn->n != 2)
|
||||
return -EINVAL;
|
||||
if (data[0]) {
|
||||
s->state &= ~data[0];
|
||||
s->state |= (data[0] & data[1]);
|
||||
dt2801_writecmd(dev, DT_C_WRITE_DIG);
|
||||
dt2801_writedata(dev, which);
|
||||
dt2801_writedata(dev, s->state);
|
||||
}
|
||||
dt2801_writecmd(dev, DT_C_READ_DIG);
|
||||
dt2801_writedata(dev, which);
|
||||
dt2801_readdata(dev, data + 1);
|
||||
|
||||
return 2;
|
||||
}
|
||||
|
||||
static int dt2801_dio_insn_config(comedi_device * dev, comedi_subdevice * s,
|
||||
comedi_insn * insn, lsampl_t * data)
|
||||
{
|
||||
int which = 0;
|
||||
|
||||
if (s == dev->subdevices + 4)
|
||||
which = 1;
|
||||
|
||||
/* configure */
|
||||
if (data[0]) {
|
||||
s->io_bits = 0xff;
|
||||
dt2801_writecmd(dev, DT_C_SET_DIGOUT);
|
||||
} else {
|
||||
s->io_bits = 0;
|
||||
dt2801_writecmd(dev, DT_C_SET_DIGIN);
|
||||
}
|
||||
dt2801_writedata(dev, which);
|
||||
|
||||
return 1;
|
||||
}
|
||||
Loading…
Reference in New Issue
Block a user