From a7e3c1d62124ca5de34aebd0451fa211d410ef93 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 3 Jul 2009 16:06:33 +0200 Subject: [PATCH] Staging: rtl8192su: remove EEPROM_OLD_FORMAT_SUPPORT ifdefs Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8192su/Makefile | 2 - drivers/staging/rtl8192su/r8192S_hw.h | 26 ---- drivers/staging/rtl8192su/r8192S_phy.c | 5 - drivers/staging/rtl8192su/r8192U.h | 6 - drivers/staging/rtl8192su/r8192U_core.c | 197 ------------------------ 5 files changed, 236 deletions(-) diff --git a/drivers/staging/rtl8192su/Makefile b/drivers/staging/rtl8192su/Makefile index 969ec4385268..11cf9f182e05 100644 --- a/drivers/staging/rtl8192su/Makefile +++ b/drivers/staging/rtl8192su/Makefile @@ -12,8 +12,6 @@ EXTRA_CFLAGS += -DRTL8190_Download_Firmware_From_Header=1 EXTRA_CFLAGS += -DRTL8192S_PREPARE_FOR_NORMAL_RELEASE EXTRA_CFLAGS += -DRTL8192SU_DISABLE_IQK=1 -#EXTRA_CFLAGS += -DEEPROM_OLD_FORMAT_SUPPORT - #EXTRA_CFLAGS += -DUSB_RX_AGGREGATION_SUPPORT=0 #EXTRA_CFLAGS += -DUSB_TX_DRIVER_AGGREGATION_ENABLE=0 #EXTRA_CFLAGS += -DRTL8192SU_DISABLE_CCK_RATE=0 diff --git a/drivers/staging/rtl8192su/r8192S_hw.h b/drivers/staging/rtl8192su/r8192S_hw.h index 7a3d850de0bf..1647550c3ac2 100644 --- a/drivers/staging/rtl8192su/r8192S_hw.h +++ b/drivers/staging/rtl8192su/r8192S_hw.h @@ -1282,17 +1282,11 @@ Default: 00b. #define EEPROM_Default_TxPower 0x1010 #define EEPROM_Default_HT2T_TxPwr 0x10 -#ifdef EEPROM_OLD_FORMAT_SUPPORT -#define EEPROM_Default_TxPowerBase 0x0 -#define EEPROM_Default_ThermalMeter 0x12 -#define EEPROM_Default_PwDiff 0x4 -#else #define EEPROM_Default_LegacyHTTxPowerDiff 0x3 #define EEPROM_Default_ThermalMeter 0x12 #define EEPROM_Default_AntTxPowerDiff 0x0 #define EEPROM_Default_TxPwDiff_CrystalCap 0x5 #define EEPROM_Default_TxPowerLevel 0x22 -#endif #define EEPROM_CHANNEL_PLAN_FCC 0x0 #define EEPROM_CHANNEL_PLAN_IC 0x1 @@ -1330,25 +1324,6 @@ Default: 00b. // The followin are for different version of EEPROM contents purpose. 2008.11.22. -#ifdef EEPROM_OLD_FORMAT_SUPPORT -#define EEPROM_PwDiff 0x54 // Difference of gain index between legacy and high throughput OFDM. -#define EEPROM_ThermalMeter 0x55 // Thermal meter default value. -#define EEPROM_Reserved 0x56 // Reserved. -#define EEPROM_CrystalCap 0x57 // Crystal Cap. -#define EEPROM_TxPowerBase 0x58 // Tx Power of serving station. -#define EEPROM_TxPwIndex_CCK_24G 0x59 // 0x59~0x66 -#define EEPROM_TxPwIndex_OFDM_24G 0x67 // 0x67~0x74 -#define EEPROM_TSSI_A 0x75 //TSSI value of path A. -#define EEPROM_TSSI_B 0x76 //TSSI value of path B. -#define EEPROM_TxPwTkMode 0x77 //Tx Power tracking mode. -#define EEPROM_HT2T_CH1_A 0x78 //HT 2T path A channel 1 Power Index. -#define EEPROM_HT2T_CH7_A 0x79 //HT 2T path A channel 7 Power Index. -#define EEPROM_HT2T_CH13_A 0x7a //HT 2T path A channel 13 Power Index. -#define EEPROM_HT2T_CH1_B 0x7b //HT 2T path B channel 1 Power Index. -#define EEPROM_HT2T_CH7_B 0x7c //HT 2T path B channel 7 Power Index. -#define EEPROM_HT2T_CH13_B 0x7d //HT 2T path B channel 13 Power Index. -#define EEPROM_BoardType 0x7e //0x0: RTL8188SU, 0x1: RTL8191SU, 0x2: RTL8192SU, 0x3: RTL8191GU -#else #define EEPROM_BoardType 0x54 //0x0: RTL8188SU, 0x1: RTL8191SU, 0x2: RTL8192SU, 0x3: RTL8191GU #define EEPROM_TxPwIndex 0x55 //0x55-0x66, Tx Power index. #define EEPROM_PwDiff 0x67 // Difference of gain index between legacy and high throughput OFDM. @@ -1366,7 +1341,6 @@ Default: 00b. #define EEPROM_TX_PWR_OFDM_DIFF 0x71// OFDM Tx Power Index Difference #define EEPROM_TX_PWR_BAND_EDGE 0x73// TX Power offset at band-edge channel #define TX_PWR_BAND_EDGE_CHK 0x79// Check if band-edge scheme is enabled -#endif #define EEPROM_Default_LegacyHTTxPowerDiff 0x3 #define EEPROM_USB_Default_OPTIONAL_FUNC 0x8 #define EEPROM_USB_Default_PHY_PARAM 0x0 diff --git a/drivers/staging/rtl8192su/r8192S_phy.c b/drivers/staging/rtl8192su/r8192S_phy.c index e2c9ed202871..36f5e247c91c 100644 --- a/drivers/staging/rtl8192su/r8192S_phy.c +++ b/drivers/staging/rtl8192su/r8192S_phy.c @@ -2639,10 +2639,6 @@ PHY_GetTxPowerLevel8192S( // // if(priv->epromtype == EPROM_93c46) { -#ifdef EEPROM_OLD_FORMAT_SUPPORT - powerlevel = priv->TxPowerLevelCCK[index]; - powerlevelOFDM24G = priv->TxPowerLevelOFDM24G[index]; -#else // // Mainly we use RF-A Tx Power to write the Tx Power registers, but the RF-B Tx // Power must be calculated by the antenna diff. @@ -2821,7 +2817,6 @@ PHY_GetTxPowerLevel8192S( // Notify Tx power difference for B/C/D to A!!! rtl8192_setBBreg(dev, rFPGA0_TxGainStage, (bXBTxAGC|bXCTxAGC|bXDTxAGC), u4RegValue); -#endif } // diff --git a/drivers/staging/rtl8192su/r8192U.h b/drivers/staging/rtl8192su/r8192U.h index 0e1213f9de15..222b615499e9 100644 --- a/drivers/staging/rtl8192su/r8192U.h +++ b/drivers/staging/rtl8192su/r8192U.h @@ -1662,11 +1662,6 @@ typedef struct r8192_priv bool bDmDisableProtect; bool bIgnoreDiffRateTxPowerOffset; -#ifdef EEPROM_OLD_FORMAT_SUPPORT - u8 EEPROMTxPowerLevelCCK24G[14]; // CCK 2.4G channel 1~14 - //u8 EEPROMTxPowerLevelOFDM24G[14]; // OFDM 2.4G channel 1~14 - //u8 EEPROMTxPowerLevelOFDM5G[24]; // OFDM 5G -#else // For EEPROM TX Power Index like 8190 series u8 EEPROMRfACCKChnl1TxPwLevel[3]; //RF-A CCK Tx Power Level at channel 7 u8 EEPROMRfAOfdmChnlTxPwLevel[3];//RF-A CCK Tx Power Level at [0],[1],[2] = channel 1,7,13 @@ -1678,7 +1673,6 @@ typedef struct r8192_priv u8 RfCckChnlAreaTxPwr[2][3]; u8 RfOfdmChnlAreaTxPwr1T[2][3]; u8 RfOfdmChnlAreaTxPwr2T[2][3]; -#endif // Add For EEPROM Efuse switch and Efuse Shadow map Setting bool EepromOrEfuse; diff --git a/drivers/staging/rtl8192su/r8192U_core.c b/drivers/staging/rtl8192su/r8192U_core.c index 4793e654096a..efcc5d1c5d47 100644 --- a/drivers/staging/rtl8192su/r8192U_core.c +++ b/drivers/staging/rtl8192su/r8192U_core.c @@ -5056,26 +5056,6 @@ rtl8192SU_ConfigAdapterInfo8192SForAutoLoadFail(struct net_device* dev) priv->EEPROMTxPwrTkMode = EEPROM_Default_TxPwrTkMode; -#ifdef EEPROM_OLD_FORMAT_SUPPORT - for(i=0; i<6; i++) - { - priv->EEPROMHT2T_TxPwr[i] = EEPROM_Default_HT2T_TxPwr; - } - - for(i=0; i<14; i++) - { - priv->EEPROMTxPowerLevelCCK24G[i] = (u8)(EEPROM_Default_TxPower & 0xff); - priv->EEPROMTxPowerLevelOFDM24G[i] = (u8)(EEPROM_Default_TxPower & 0xff); - } - - // - // Update HAL variables. - // - memcpy( priv->TxPowerLevelOFDM24G, priv->EEPROMTxPowerLevelOFDM24G, 14); - memcpy( priv->TxPowerLevelCCK, priv->EEPROMTxPowerLevelCCK24G, 14); - //RT_PRINT_DATA(COMP_INIT|COMP_EFUSE, DBG_LOUD, ("HAL CCK 2.4G TxPwr: \n"), priv->TxPowerLevelCCK, 14); - //RT_PRINT_DATA(COMP_INIT|COMP_EFUSE, DBG_LOUD, ("HAL OFDM 2.4G TxPwr: \n"), priv->TxPowerLevelOFDM24G, 14); -#else for (rf_path = 0; rf_path < 2; rf_path++) { @@ -5125,7 +5105,6 @@ rtl8192SU_ConfigAdapterInfo8192SForAutoLoadFail(struct net_device* dev) //priv->RfTxPwrLevelOfdm1T[0][i] , //priv->RfTxPwrLevelOfdm2T[0][i] ); } -#endif // // Update remained HAL variables. @@ -5349,50 +5328,8 @@ static void rtl8192SU_ReadAdapterInfo8192SEEPROM(struct net_device* dev) RT_TRACE(COMP_INIT, "BoardType = %#x\n", priv->EEPROMBoardType); -#ifdef EEPROM_OLD_FORMAT_SUPPORT - - // - // Buffer TxPwIdx(i.e., from offset 0x58~0x75, total 30Bytes) - // - if(bLoad_From_EEPOM) - { - for(i = 0; i < 30; i += 2) - { - tmpValue = eprom_read(dev, (u16) ((EEPROM_TxPowerBase+i)>>1)); - *((u16 *)(&tmpBuffer[i])) = tmpValue; - } - } - - // - // Update CCK, OFDM Tx Power Index from above buffer. - // - if(bLoad_From_EEPOM) - { - for(i=0; i<14; i++) - { - priv->EEPROMTxPowerLevelCCK24G[i] = (u8)tmpBuffer[i+1]; - priv->EEPROMTxPowerLevelOFDM24G[i] = (u8)tmpBuffer[i+15]; - } - - } - else - { - for(i=0; i<14; i++) - { - priv->EEPROMTxPowerLevelCCK24G[i] = (u8)(EEPROM_Default_TxPower & 0xff); - priv->EEPROMTxPowerLevelOFDM24G[i] = (u8)(EEPROM_Default_TxPower & 0xff); - } - } - - for(i=0; i<14; i++) - { - RT_TRACE(COMP_INIT, "CCK 2.4G Tx Power Level, Index %d = 0x%02x\n", i, priv->EEPROMTxPowerLevelCCK24G[i]); - RT_TRACE(COMP_INIT, "OFDM 2.4G Tx Power Level, Index %d = 0x%02x\n", i, priv->EEPROMTxPowerLevelOFDM24G[i]); - } -#else // Please add code in the section!!!! // And merge tx power difference section. -#endif // // Get TSSI value for each path. @@ -5422,47 +5359,10 @@ static void rtl8192SU_ReadAdapterInfo8192SEEPROM(struct net_device* dev) RT_TRACE(COMP_INIT, "TSSI_A = %#x, TSSI_B = %#x\n", priv->EEPROMTSSI_A, priv->EEPROMTSSI_B); RT_TRACE(COMP_INIT, "TxPwrTkMod = %#x\n", priv->EEPROMTxPwrTkMode); -#ifdef EEPROM_OLD_FORMAT_SUPPORT - // - // Get HT 2T Path A and B Power Index. - // - if(bLoad_From_EEPOM) - { - for(i = 0; i < 6; i += 2) - { - tmpValue = eprom_read(dev, (u16) ((EEPROM_HT2T_CH1_A+i)>>1)); - *((u16*)(&priv->EEPROMHT2T_TxPwr[i])) = tmpValue; - } - } - else - { // Default setting for Empty EEPROM - for(i=0; i<6; i++) - { - priv->EEPROMHT2T_TxPwr[i] = EEPROM_Default_HT2T_TxPwr; - } - } - for(i=0; i<6; i++) - { - RT_TRACE(COMP_INIT, "EEPROMHT2T_TxPwr, Index %d = 0x%02x\n", i, priv->EEPROMHT2T_TxPwr[i]); - } -#else - -#endif } -#ifdef EEPROM_OLD_FORMAT_SUPPORT - // - // Update HAL variables. - // - for(i=0; i<14; i++) - { - priv->TxPowerLevelOFDM24G[i] = priv->EEPROMTxPowerLevelOFDM24G[i]; - priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelCCK24G[i]; - } -#else -#endif priv->TxPowerDiff = priv->EEPROMPwDiff; // Antenna B gain offset to antenna A, bit0~3 priv->AntennaTxPwDiff[0] = (priv->EEPROMTxPowerDiff & 0xf); @@ -5750,47 +5650,8 @@ rtl8192SU_ReadAdapterInfo8192SEFuse(struct net_device* dev) //if(pHalData->EEPROM_Def_Ver == 0) { -#ifdef EEPROM_OLD_FORMAT_SUPPORT - // - // Get CCK Tx Power Index. - // - if(!priv->AutoloadFailFlag) - { - ReadEFuse(dev, EEPROM_TxPwIndex_CCK_24G, 14, (unsigned char*)CCKTxPwr); - for(i=0; i<14; i++) - { - RT_TRACE(COMP_INIT, "CCK 2.4G Tx Power Level, Index %d = 0x%02x\n", i, CCKTxPwr[i]); - priv->EEPROMTxPowerLevelCCK24G[i] = CCKTxPwr[i]; - } - } - else - { // Default setting for Empty EEPROM - for(i=0; i<14; i++) - priv->EEPROMTxPowerLevelCCK24G[i] = (u8)(EEPROM_Default_TxPower & 0xff); - } - - // - // Get OFDM Tx Power Index. - // - if(!priv->AutoloadFailFlag) - { - ReadEFuse(dev, EEPROM_TxPwIndex_OFDM_24G, 14, (unsigned char*)OFDMTxPwr); - for(i=0; i<14; i++) - { - RT_TRACE(COMP_INIT, "OFDM 2.4G Tx Power Level, Index %d = 0x%02x\n", i, OFDMTxPwr[i]); - priv->EEPROMTxPowerLevelOFDM24G[i] = OFDMTxPwr[i]; - } - } - else - { // Default setting for Empty EEPROM - usValue = 0x10; - for(i=0; i<14; i++) - priv->EEPROMTxPowerLevelOFDM24G[i] = (u8)usValue; - } -#else // Please add code in the section!!!! // And merge tx power difference section. -#endif // // Get TSSI value for each path. @@ -5853,18 +5714,7 @@ rtl8192SU_ReadAdapterInfo8192SEFuse(struct net_device* dev) } } -#ifdef EEPROM_OLD_FORMAT_SUPPORT - // - // Update HAL variables. - // - for(i=0; i<14; i++) - { - priv->TxPowerLevelOFDM24G[i] = priv->EEPROMTxPowerLevelOFDM24G[i]; - priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelCCK24G[i]; - } -#else -#endif priv->TxPowerDiff = priv->EEPROMPwDiff; // Antenna B gain offset to antenna A, bit0~3 priv->AntennaTxPwDiff[0] = (priv->EEPROMTxPowerDiff & 0xf); @@ -6254,52 +6104,6 @@ rtl8192SU_ReadAdapterInfo8192SUsb(struct net_device* dev) RT_TRACE(COMP_INIT, "TxPwrTkMod = %#x\n", priv->EEPROMTxPwrTkMode); -#ifdef EEPROM_OLD_FORMAT_SUPPORT - - // - // The following settings are EFUSE version dependence. - // So we need to adjust reading offset. - // 2008.11.22. - // - { - // - // Get HT 2T Path A and B Power Index. - // - //if(!priv->AutoloadFailFlag) - { - for(i=0; i<6; i++) - { - priv->EEPROMHT2T_TxPwr[i] = *(u8 *)&hwinfo[EEPROM_HT2T_CH1_A+i]; - } - } - - //RT_PRINT_DATA(COMP_EFUSE, "HT2T TxPwr: \n"), pHalData->EEPROMHT2T_TxPwr, 6); - - // - // Get CCK and OFDM Tx Power Index. - // - //if(!priv->AutoloadFailFlag) - { - for(i=0; i<14; i++) - { - priv->EEPROMTxPowerLevelCCK24G[i] = *(u8 *)&hwinfo[EEPROM_TxPwIndex_CCK_24G+i]; - priv->EEPROMTxPowerLevelOFDM24G[i] = *(u8 *)&hwinfo[EEPROM_TxPwIndex_OFDM_24G+i]; - } - } - - //RT_PRINT_DATA(COMP_EFUSE, DBG_LOUD, ("CCK 2.4G TxPwr: \n"), pHalData->EEPROMTxPowerLevelCCK24G, 14); - //RT_PRINT_DATA(COMP_EFUSE, DBG_LOUD, ("OFDM 2.4G TxPwr: \n"), pHalData->EEPROMTxPowerLevelOFDM24G, 14); - - // - // Update HAL variables. - // - memcpy( priv->TxPowerLevelOFDM24G, priv->EEPROMTxPowerLevelOFDM24G, 14); - memcpy( priv->TxPowerLevelCCK, priv->EEPROMTxPowerLevelCCK24G, 14); - //RT_PRINT_DATA(COMP_EFUSE, DBG_LOUD, ("HAL CCK 2.4G TxPwr: \n"), pHalData->TxPowerLevelCCK, 14); - //RT_PRINT_DATA(COMP_EFUSE, DBG_LOUD, ("HAL OFDM 2.4G TxPwr: \n"), pHalData->TxPowerLevelOFDM24G, 14); - - } -#else // Support new version of EFUSE content, 2008.11.22. { // // Buffer TxPwIdx(i.e., from offset 0x55~0x66, total 18Bytes) @@ -6467,7 +6271,6 @@ rtl8192SU_ReadAdapterInfo8192SUsb(struct net_device* dev) priv->TxPwrbandEdgeLegacyOfdm[RF90_PATH_B][0], priv->TxPwrbandEdgeLegacyOfdm[RF90_PATH_B][1]); RT_TRACE((COMP_INIT&COMP_DBG), "Band-edge enable flag = %d\n", priv->TxPwrbandEdgeFlag); -#endif // // Update remained HAL variables.