mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-18 23:18:20 +00:00
spi i.MX: do not depend on grouped clocks
the current i.MX clock support groups together unrelated clocks to a single clock which is then used by the driver. This can't be accomplished with the generic clock framework so we instead request the individual clocks in the driver. For i.MX there are generally three different clocks: ipg: bus clock (needed to access registers) ahb: dma relevant clock, sometimes referred to as hclk in the datasheet per: bit clock, pixel clock This patch changes the driver to request the individual clocks. Currently all clk_get will get the same clock until the SoCs are converted to the generic clock framework Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit is contained in:
parent
7560e3f358
commit
aa29d840e3
@ -85,7 +85,8 @@ struct spi_imx_data {
|
||||
struct completion xfer_done;
|
||||
void __iomem *base;
|
||||
int irq;
|
||||
struct clk *clk;
|
||||
struct clk *clk_per;
|
||||
struct clk *clk_ipg;
|
||||
unsigned long spi_clk;
|
||||
|
||||
unsigned int count;
|
||||
@ -845,15 +846,22 @@ static int __devinit spi_imx_probe(struct platform_device *pdev)
|
||||
goto out_iounmap;
|
||||
}
|
||||
|
||||
spi_imx->clk = clk_get(&pdev->dev, NULL);
|
||||
if (IS_ERR(spi_imx->clk)) {
|
||||
dev_err(&pdev->dev, "unable to get clock\n");
|
||||
ret = PTR_ERR(spi_imx->clk);
|
||||
spi_imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
|
||||
if (IS_ERR(spi_imx->clk_ipg)) {
|
||||
ret = PTR_ERR(spi_imx->clk_ipg);
|
||||
goto out_free_irq;
|
||||
}
|
||||
|
||||
clk_enable(spi_imx->clk);
|
||||
spi_imx->spi_clk = clk_get_rate(spi_imx->clk);
|
||||
spi_imx->clk_per = devm_clk_get(&pdev->dev, "per");
|
||||
if (IS_ERR(spi_imx->clk_per)) {
|
||||
ret = PTR_ERR(spi_imx->clk_per);
|
||||
goto out_free_irq;
|
||||
}
|
||||
|
||||
clk_prepare_enable(spi_imx->clk_per);
|
||||
clk_prepare_enable(spi_imx->clk_ipg);
|
||||
|
||||
spi_imx->spi_clk = clk_get_rate(spi_imx->clk_per);
|
||||
|
||||
spi_imx->devtype_data->reset(spi_imx);
|
||||
|
||||
@ -871,8 +879,8 @@ static int __devinit spi_imx_probe(struct platform_device *pdev)
|
||||
return ret;
|
||||
|
||||
out_clk_put:
|
||||
clk_disable(spi_imx->clk);
|
||||
clk_put(spi_imx->clk);
|
||||
clk_disable_unprepare(spi_imx->clk_per);
|
||||
clk_disable_unprepare(spi_imx->clk_ipg);
|
||||
out_free_irq:
|
||||
free_irq(spi_imx->irq, spi_imx);
|
||||
out_iounmap:
|
||||
@ -900,8 +908,8 @@ static int __devexit spi_imx_remove(struct platform_device *pdev)
|
||||
spi_bitbang_stop(&spi_imx->bitbang);
|
||||
|
||||
writel(0, spi_imx->base + MXC_CSPICTRL);
|
||||
clk_disable(spi_imx->clk);
|
||||
clk_put(spi_imx->clk);
|
||||
clk_disable_unprepare(spi_imx->clk_per);
|
||||
clk_disable_unprepare(spi_imx->clk_ipg);
|
||||
free_irq(spi_imx->irq, spi_imx);
|
||||
iounmap(spi_imx->base);
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user