mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-14 12:49:08 +00:00
reset: Add i.MX7 SRC reset driver
Add reset controller driver exposing various reset faculties, implemented by System Reset Controller IP block. Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This commit is contained in:
Andrey Smirnov
Philipp Zabel
parent
d518d9cab1
commit
abf97755ae
47
Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
Normal file
47
Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
Normal file
@ -0,0 +1,47 @@
|
||||
Freescale i.MX7 System Reset Controller
|
||||
======================================
|
||||
|
||||
Please also refer to reset.txt in this directory for common reset
|
||||
controller binding usage.
|
||||
|
||||
Required properties:
|
||||
- compatible: Should be "fsl,imx7-src", "syscon"
|
||||
- reg: should be register base and length as documented in the
|
||||
datasheet
|
||||
- interrupts: Should contain SRC interrupt
|
||||
- #reset-cells: 1, see below
|
||||
|
||||
example:
|
||||
|
||||
src: reset-controller@30390000 {
|
||||
compatible = "fsl,imx7d-src", "syscon";
|
||||
reg = <0x30390000 0x2000>;
|
||||
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
|
||||
Specifying reset lines connected to IP modules
|
||||
==============================================
|
||||
|
||||
The system reset controller can be used to reset various set of
|
||||
peripherals. Device nodes that need access to reset lines should
|
||||
specify them as a reset phandle in their corresponding node as
|
||||
specified in reset.txt.
|
||||
|
||||
Example:
|
||||
|
||||
pcie: pcie@33800000 {
|
||||
|
||||
...
|
||||
|
||||
resets = <&src IMX7_RESET_PCIEPHY>,
|
||||
<&src IMX7_RESET_PCIE_CTRL_APPS_EN>;
|
||||
reset-names = "pciephy", "apps";
|
||||
|
||||
...
|
||||
};
|
||||
|
||||
|
||||
For list of all valid reset indicies see
|
||||
<dt-bindings/reset/imx7-reset.h>
|
||||
@ -27,6 +27,13 @@ config RESET_BERLIN
|
||||
help
|
||||
This enables the reset controller driver for Marvell Berlin SoCs.
|
||||
|
||||
config RESET_IMX7
|
||||
bool "i.MX7 Reset Driver" if COMPILE_TEST
|
||||
default SOC_IMX7D
|
||||
select MFD_SYSCON
|
||||
help
|
||||
This enables the reset controller driver for i.MX7 SoCs.
|
||||
|
||||
config RESET_LPC18XX
|
||||
bool "LPC18xx/43xx Reset Driver" if COMPILE_TEST
|
||||
default ARCH_LPC18XX
|
||||
|
||||
@ -4,6 +4,7 @@ obj-$(CONFIG_ARCH_STI) += sti/
|
||||
obj-$(CONFIG_ARCH_TEGRA) += tegra/
|
||||
obj-$(CONFIG_RESET_ATH79) += reset-ath79.o
|
||||
obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o
|
||||
obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
|
||||
obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
|
||||
obj-$(CONFIG_RESET_MESON) += reset-meson.o
|
||||
obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
|
||||
@ -15,3 +16,4 @@ obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o
|
||||
obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
|
||||
obj-$(CONFIG_RESET_ZX2967) += reset-zx2967.o
|
||||
obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o
|
||||
|
||||
|
||||
158
drivers/reset/reset-imx7.c
Normal file
158
drivers/reset/reset-imx7.c
Normal file
@ -0,0 +1,158 @@
|
||||
/*
|
||||
* Copyright (c) 2017, Impinj, Inc.
|
||||
*
|
||||
* i.MX7 System Reset Controller (SRC) driver
|
||||
*
|
||||
* Author: Andrey Smirnov <andrew.smirnov@gmail.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <linux/mfd/syscon.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/reset-controller.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <dt-bindings/reset/imx7-reset.h>
|
||||
|
||||
struct imx7_src {
|
||||
struct reset_controller_dev rcdev;
|
||||
struct regmap *regmap;
|
||||
};
|
||||
|
||||
enum imx7_src_registers {
|
||||
SRC_A7RCR0 = 0x0004,
|
||||
SRC_M4RCR = 0x000c,
|
||||
SRC_ERCR = 0x0014,
|
||||
SRC_HSICPHY_RCR = 0x001c,
|
||||
SRC_USBOPHY1_RCR = 0x0020,
|
||||
SRC_USBOPHY2_RCR = 0x0024,
|
||||
SRC_MIPIPHY_RCR = 0x0028,
|
||||
SRC_PCIEPHY_RCR = 0x002c,
|
||||
SRC_DDRC_RCR = 0x1000,
|
||||
};
|
||||
|
||||
struct imx7_src_signal {
|
||||
unsigned int offset, bit;
|
||||
};
|
||||
|
||||
static const struct imx7_src_signal imx7_src_signals[IMX7_RESET_NUM] = {
|
||||
[IMX7_RESET_A7_CORE_POR_RESET0] = { SRC_A7RCR0, BIT(0) },
|
||||
[IMX7_RESET_A7_CORE_POR_RESET1] = { SRC_A7RCR0, BIT(1) },
|
||||
[IMX7_RESET_A7_CORE_RESET0] = { SRC_A7RCR0, BIT(4) },
|
||||
[IMX7_RESET_A7_CORE_RESET1] = { SRC_A7RCR0, BIT(5) },
|
||||
[IMX7_RESET_A7_DBG_RESET0] = { SRC_A7RCR0, BIT(8) },
|
||||
[IMX7_RESET_A7_DBG_RESET1] = { SRC_A7RCR0, BIT(9) },
|
||||
[IMX7_RESET_A7_ETM_RESET0] = { SRC_A7RCR0, BIT(12) },
|
||||
[IMX7_RESET_A7_ETM_RESET1] = { SRC_A7RCR0, BIT(13) },
|
||||
[IMX7_RESET_A7_SOC_DBG_RESET] = { SRC_A7RCR0, BIT(20) },
|
||||
[IMX7_RESET_A7_L2RESET] = { SRC_A7RCR0, BIT(21) },
|
||||
[IMX7_RESET_SW_M4C_RST] = { SRC_M4RCR, BIT(1) },
|
||||
[IMX7_RESET_SW_M4P_RST] = { SRC_M4RCR, BIT(2) },
|
||||
[IMX7_RESET_EIM_RST] = { SRC_ERCR, BIT(0) },
|
||||
[IMX7_RESET_HSICPHY_PORT_RST] = { SRC_HSICPHY_RCR, BIT(1) },
|
||||
[IMX7_RESET_USBPHY1_POR] = { SRC_USBOPHY1_RCR, BIT(0) },
|
||||
[IMX7_RESET_USBPHY1_PORT_RST] = { SRC_USBOPHY1_RCR, BIT(1) },
|
||||
[IMX7_RESET_USBPHY2_POR] = { SRC_USBOPHY2_RCR, BIT(0) },
|
||||
[IMX7_RESET_USBPHY2_PORT_RST] = { SRC_USBOPHY2_RCR, BIT(1) },
|
||||
[IMX7_RESET_MIPI_PHY_MRST] = { SRC_MIPIPHY_RCR, BIT(1) },
|
||||
[IMX7_RESET_MIPI_PHY_SRST] = { SRC_MIPIPHY_RCR, BIT(2) },
|
||||
[IMX7_RESET_PCIEPHY] = { SRC_PCIEPHY_RCR, BIT(2) | BIT(1) },
|
||||
[IMX7_RESET_PCIEPHY_PERST] = { SRC_PCIEPHY_RCR, BIT(3) },
|
||||
[IMX7_RESET_PCIE_CTRL_APPS_EN] = { SRC_PCIEPHY_RCR, BIT(6) },
|
||||
[IMX7_RESET_DDRC_PRST] = { SRC_DDRC_RCR, BIT(0) },
|
||||
[IMX7_RESET_DDRC_CORE_RST] = { SRC_DDRC_RCR, BIT(1) },
|
||||
};
|
||||
|
||||
static struct imx7_src *to_imx7_src(struct reset_controller_dev *rcdev)
|
||||
{
|
||||
return container_of(rcdev, struct imx7_src, rcdev);
|
||||
}
|
||||
|
||||
static int imx7_reset_set(struct reset_controller_dev *rcdev,
|
||||
unsigned long id, bool assert)
|
||||
{
|
||||
struct imx7_src *imx7src = to_imx7_src(rcdev);
|
||||
const struct imx7_src_signal *signal = &imx7_src_signals[id];
|
||||
unsigned int value = 0;
|
||||
|
||||
switch (id) {
|
||||
case IMX7_RESET_PCIEPHY:
|
||||
/*
|
||||
* wait for more than 10us to release phy g_rst and
|
||||
* btnrst
|
||||
*/
|
||||
if (!assert)
|
||||
udelay(10);
|
||||
break;
|
||||
|
||||
case IMX7_RESET_PCIE_CTRL_APPS_EN:
|
||||
value = (assert) ? 0 : signal->bit;
|
||||
break;
|
||||
}
|
||||
|
||||
return regmap_update_bits(imx7src->regmap,
|
||||
signal->offset, signal->bit, value);
|
||||
}
|
||||
|
||||
static int imx7_reset_assert(struct reset_controller_dev *rcdev,
|
||||
unsigned long id)
|
||||
{
|
||||
return imx7_reset_set(rcdev, id, true);
|
||||
}
|
||||
|
||||
static int imx7_reset_deassert(struct reset_controller_dev *rcdev,
|
||||
unsigned long id)
|
||||
{
|
||||
return imx7_reset_set(rcdev, id, false);
|
||||
}
|
||||
|
||||
static const struct reset_control_ops imx7_reset_ops = {
|
||||
.assert = imx7_reset_assert,
|
||||
.deassert = imx7_reset_deassert,
|
||||
};
|
||||
|
||||
static int imx7_reset_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct imx7_src *imx7src;
|
||||
struct device *dev = &pdev->dev;
|
||||
struct regmap_config config = { .name = "src" };
|
||||
|
||||
imx7src = devm_kzalloc(dev, sizeof(*imx7src), GFP_KERNEL);
|
||||
if (!imx7src)
|
||||
return -ENOMEM;
|
||||
|
||||
imx7src->regmap = syscon_node_to_regmap(dev->of_node);
|
||||
if (IS_ERR(imx7src->regmap)) {
|
||||
dev_err(dev, "Unable to get imx7-src regmap");
|
||||
return PTR_ERR(imx7src->regmap);
|
||||
}
|
||||
regmap_attach_dev(dev, imx7src->regmap, &config);
|
||||
|
||||
imx7src->rcdev.owner = THIS_MODULE;
|
||||
imx7src->rcdev.nr_resets = IMX7_RESET_NUM;
|
||||
imx7src->rcdev.ops = &imx7_reset_ops;
|
||||
imx7src->rcdev.of_node = dev->of_node;
|
||||
|
||||
return devm_reset_controller_register(dev, &imx7src->rcdev);
|
||||
}
|
||||
|
||||
static const struct of_device_id imx7_reset_dt_ids[] = {
|
||||
{ .compatible = "fsl,imx7d-src", },
|
||||
{ /* sentinel */ },
|
||||
};
|
||||
|
||||
static struct platform_driver imx7_reset_driver = {
|
||||
.probe = imx7_reset_probe,
|
||||
.driver = {
|
||||
.name = KBUILD_MODNAME,
|
||||
.of_match_table = imx7_reset_dt_ids,
|
||||
},
|
||||
};
|
||||
builtin_platform_driver(imx7_reset_driver);
|
||||
62
include/dt-bindings/reset/imx7-reset.h
Normal file
62
include/dt-bindings/reset/imx7-reset.h
Normal file
@ -0,0 +1,62 @@
|
||||
/*
|
||||
* Copyright (C) 2017 Impinj, Inc.
|
||||
*
|
||||
* Author: Andrey Smirnov <andrew.smirnov@gmail.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms and conditions of the GNU General Public License,
|
||||
* version 2, as published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope it will be useful, but WITHOUT
|
||||
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
||||
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
||||
* more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef DT_BINDING_RESET_IMX7_H
|
||||
#define DT_BINDING_RESET_IMX7_H
|
||||
|
||||
#define IMX7_RESET_A7_CORE_POR_RESET0 0
|
||||
#define IMX7_RESET_A7_CORE_POR_RESET1 1
|
||||
#define IMX7_RESET_A7_CORE_RESET0 2
|
||||
#define IMX7_RESET_A7_CORE_RESET1 3
|
||||
#define IMX7_RESET_A7_DBG_RESET0 4
|
||||
#define IMX7_RESET_A7_DBG_RESET1 5
|
||||
#define IMX7_RESET_A7_ETM_RESET0 6
|
||||
#define IMX7_RESET_A7_ETM_RESET1 7
|
||||
#define IMX7_RESET_A7_SOC_DBG_RESET 8
|
||||
#define IMX7_RESET_A7_L2RESET 9
|
||||
#define IMX7_RESET_SW_M4C_RST 10
|
||||
#define IMX7_RESET_SW_M4P_RST 11
|
||||
#define IMX7_RESET_EIM_RST 12
|
||||
#define IMX7_RESET_HSICPHY_PORT_RST 13
|
||||
#define IMX7_RESET_USBPHY1_POR 14
|
||||
#define IMX7_RESET_USBPHY1_PORT_RST 15
|
||||
#define IMX7_RESET_USBPHY2_POR 16
|
||||
#define IMX7_RESET_USBPHY2_PORT_RST 17
|
||||
#define IMX7_RESET_MIPI_PHY_MRST 18
|
||||
#define IMX7_RESET_MIPI_PHY_SRST 19
|
||||
|
||||
/*
|
||||
* IMX7_RESET_PCIEPHY is a logical reset line combining PCIEPHY_BTN
|
||||
* and PCIEPHY_G_RST
|
||||
*/
|
||||
#define IMX7_RESET_PCIEPHY 20
|
||||
#define IMX7_RESET_PCIEPHY_PERST 21
|
||||
|
||||
/*
|
||||
* IMX7_RESET_PCIE_CTRL_APPS_EN is not strictly a reset line, but it
|
||||
* can be used to inhibit PCIe LTTSM, so, in a way, it can be thoguht
|
||||
* of as one
|
||||
*/
|
||||
#define IMX7_RESET_PCIE_CTRL_APPS_EN 22
|
||||
#define IMX7_RESET_DDRC_PRST 23
|
||||
#define IMX7_RESET_DDRC_CORE_RST 24
|
||||
|
||||
#define IMX7_RESET_NUM 25
|
||||
|
||||
#endif
|
||||
|
||||
Loading…
Reference in New Issue
Block a user