mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-25 19:07:46 +00:00
mmc: sdhci-msm: Add support for UHS cards
Enabling support for ultra high speed mode cards requires some voltage switching and interaction with the PMIC via a special power IRQ. Add support for this. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This commit is contained in:
parent
ee32067489
commit
ad81d38710
@ -32,6 +32,21 @@
|
||||
#define CORE_POWER 0x0
|
||||
#define CORE_SW_RST BIT(7)
|
||||
|
||||
#define CORE_PWRCTL_STATUS 0xdc
|
||||
#define CORE_PWRCTL_MASK 0xe0
|
||||
#define CORE_PWRCTL_CLEAR 0xe4
|
||||
#define CORE_PWRCTL_CTL 0xe8
|
||||
#define CORE_PWRCTL_BUS_OFF BIT(0)
|
||||
#define CORE_PWRCTL_BUS_ON BIT(1)
|
||||
#define CORE_PWRCTL_IO_LOW BIT(2)
|
||||
#define CORE_PWRCTL_IO_HIGH BIT(3)
|
||||
#define CORE_PWRCTL_BUS_SUCCESS BIT(0)
|
||||
#define CORE_PWRCTL_IO_SUCCESS BIT(2)
|
||||
#define REQ_BUS_OFF BIT(0)
|
||||
#define REQ_BUS_ON BIT(1)
|
||||
#define REQ_IO_LOW BIT(2)
|
||||
#define REQ_IO_HIGH BIT(3)
|
||||
#define INT_MASK 0xf
|
||||
#define MAX_PHASES 16
|
||||
#define CORE_DLL_LOCK BIT(7)
|
||||
#define CORE_DLL_EN BIT(16)
|
||||
@ -56,6 +71,7 @@
|
||||
struct sdhci_msm_host {
|
||||
struct platform_device *pdev;
|
||||
void __iomem *core_mem; /* MSM SDCC mapped address */
|
||||
int pwr_irq; /* power irq */
|
||||
struct clk *clk; /* main SD/MMC bus clock */
|
||||
struct clk *pclk; /* SDHC peripheral bus clock */
|
||||
struct clk *bus_clk; /* SDHC bus voter clock */
|
||||
@ -456,6 +472,39 @@ static void sdhci_msm_set_uhs_signaling(struct sdhci_host *host,
|
||||
sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
|
||||
}
|
||||
|
||||
static void sdhci_msm_voltage_switch(struct sdhci_host *host)
|
||||
{
|
||||
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
||||
struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
|
||||
u32 irq_status, irq_ack = 0;
|
||||
|
||||
irq_status = readl_relaxed(msm_host->core_mem + CORE_PWRCTL_STATUS);
|
||||
irq_status &= INT_MASK;
|
||||
|
||||
writel_relaxed(irq_status, msm_host->core_mem + CORE_PWRCTL_CLEAR);
|
||||
|
||||
if (irq_status & (CORE_PWRCTL_BUS_ON | CORE_PWRCTL_BUS_OFF))
|
||||
irq_ack |= CORE_PWRCTL_BUS_SUCCESS;
|
||||
if (irq_status & (CORE_PWRCTL_IO_LOW | CORE_PWRCTL_IO_HIGH))
|
||||
irq_ack |= CORE_PWRCTL_IO_SUCCESS;
|
||||
|
||||
/*
|
||||
* The driver has to acknowledge the interrupt, switch voltages and
|
||||
* report back if it succeded or not to this register. The voltage
|
||||
* switches are handled by the sdhci core, so just report success.
|
||||
*/
|
||||
writel_relaxed(irq_ack, msm_host->core_mem + CORE_PWRCTL_CTL);
|
||||
}
|
||||
|
||||
static irqreturn_t sdhci_msm_pwr_irq(int irq, void *data)
|
||||
{
|
||||
struct sdhci_host *host = (struct sdhci_host *)data;
|
||||
|
||||
sdhci_msm_voltage_switch(host);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static const struct of_device_id sdhci_msm_dt_match[] = {
|
||||
{ .compatible = "qcom,sdhci-msm-v4" },
|
||||
{},
|
||||
@ -469,6 +518,7 @@ static const struct sdhci_ops sdhci_msm_ops = {
|
||||
.set_clock = sdhci_set_clock,
|
||||
.set_bus_width = sdhci_set_bus_width,
|
||||
.set_uhs_signaling = sdhci_msm_set_uhs_signaling,
|
||||
.voltage_switch = sdhci_msm_voltage_switch,
|
||||
};
|
||||
|
||||
static const struct sdhci_pltfm_data sdhci_msm_pdata = {
|
||||
@ -592,6 +642,22 @@ static int sdhci_msm_probe(struct platform_device *pdev)
|
||||
CORE_VENDOR_SPEC_CAPABILITIES0);
|
||||
}
|
||||
|
||||
/* Setup IRQ for handling power/voltage tasks with PMIC */
|
||||
msm_host->pwr_irq = platform_get_irq_byname(pdev, "pwr_irq");
|
||||
if (msm_host->pwr_irq < 0) {
|
||||
dev_err(&pdev->dev, "Get pwr_irq failed (%d)\n",
|
||||
msm_host->pwr_irq);
|
||||
goto clk_disable;
|
||||
}
|
||||
|
||||
ret = devm_request_threaded_irq(&pdev->dev, msm_host->pwr_irq, NULL,
|
||||
sdhci_msm_pwr_irq, IRQF_ONESHOT,
|
||||
dev_name(&pdev->dev), host);
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "Request IRQ failed (%d)\n", ret);
|
||||
goto clk_disable;
|
||||
}
|
||||
|
||||
ret = sdhci_add_host(host);
|
||||
if (ret)
|
||||
goto clk_disable;
|
||||
|
Loading…
Reference in New Issue
Block a user