diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index c273f3e0ba84..a2e891840806 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -88,12 +88,6 @@ struct task_struct;
 void start_thread(struct pt_regs *regs, unsigned long fdptr, unsigned long sp);
 void release_thread(struct task_struct *);
 
-/* Lazy FPU handling on uni-processor */
-extern struct task_struct *last_task_used_math;
-extern struct task_struct *last_task_used_altivec;
-extern struct task_struct *last_task_used_vsx;
-extern struct task_struct *last_task_used_spe;
-
 #ifdef CONFIG_PPC32
 
 #if CONFIG_TASK_SIZE > CONFIG_KERNEL_START
diff --git a/arch/powerpc/include/asm/switch_to.h b/arch/powerpc/include/asm/switch_to.h
index 33a071d24ba8..bd1d93318350 100644
--- a/arch/powerpc/include/asm/switch_to.h
+++ b/arch/powerpc/include/asm/switch_to.h
@@ -27,14 +27,6 @@ extern void giveup_spe(struct task_struct *);
 extern void load_up_spe(struct task_struct *);
 extern void switch_booke_debug_regs(struct debug_reg *new_debug);
 
-#ifndef CONFIG_SMP
-extern void discard_lazy_cpu_state(void);
-#else
-static inline void discard_lazy_cpu_state(void)
-{
-}
-#endif
-
 #ifdef CONFIG_PPC_FPU
 extern void flush_fp_to_thread(struct task_struct *);
 extern void giveup_fpu(struct task_struct *);
diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S
index 38eb79b8a034..50d2352f2cf4 100644
--- a/arch/powerpc/kernel/fpu.S
+++ b/arch/powerpc/kernel/fpu.S
@@ -132,31 +132,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
 	SYNC
 	MTMSRD(r5)			/* enable use of fpu now */
 	isync
-/*
- * For SMP, we don't do lazy FPU switching because it just gets too
- * horrendously complex, especially when a task switches from one CPU
- * to another.  Instead we call giveup_fpu in switch_to.
- */
-#ifndef CONFIG_SMP
-	LOAD_REG_ADDRBASE(r3, last_task_used_math)
-	toreal(r3)
-	PPC_LL	r4,ADDROFF(last_task_used_math)(r3)
-	PPC_LCMPI	0,r4,0
-	beq	1f
-	toreal(r4)
-	addi	r4,r4,THREAD		/* want last_task_used_math->thread */
-	addi	r10,r4,THREAD_FPSTATE
-	SAVE_32FPVSRS(0, R5, R10)
-	mffs	fr0
-	stfd	fr0,FPSTATE_FPSCR(r10)
-	PPC_LL	r5,PT_REGS(r4)
-	toreal(r5)
-	PPC_LL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	li	r10,MSR_FP|MSR_FE0|MSR_FE1
-	andc	r4,r4,r10		/* disable FP for previous task */
-	PPC_STL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* CONFIG_SMP */
 	/* enable use of FP after return */
 #ifdef CONFIG_PPC32
 	mfspr	r5,SPRN_SPRG_THREAD	/* current task's THREAD (phys) */
@@ -175,11 +150,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
 	lfd	fr0,FPSTATE_FPSCR(r10)
 	MTFSF_L(fr0)
 	REST_32FPVSRS(0, R4, R10)
-#ifndef CONFIG_SMP
-	subi	r4,r5,THREAD
-	fromreal(r4)
-	PPC_STL	r4,ADDROFF(last_task_used_math)(r3)
-#endif /* CONFIG_SMP */
 	/* restore registers and return */
 	/* we haven't used ctr or xer or lr */
 	blr
@@ -226,11 +196,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
 	andc	r4,r4,r3		/* disable FP for previous task */
 	PPC_STL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
 1:
-#ifndef CONFIG_SMP
-	li	r5,0
-	LOAD_REG_ADDRBASE(r4,last_task_used_math)
-	PPC_STL	r5,ADDROFF(last_task_used_math)(r4)
-#endif /* CONFIG_SMP */
 	blr
 
 /*
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index fffd1f96bb1d..ec936abbcadc 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -857,29 +857,6 @@ _GLOBAL(load_up_spe)
 	oris	r5,r5,MSR_SPE@h
 	mtmsr	r5			/* enable use of SPE now */
 	isync
-/*
- * For SMP, we don't do lazy SPE switching because it just gets too
- * horrendously complex, especially when a task switches from one CPU
- * to another.  Instead we call giveup_spe in switch_to.
- */
-#ifndef CONFIG_SMP
-	lis	r3,last_task_used_spe@ha
-	lwz	r4,last_task_used_spe@l(r3)
-	cmpi	0,r4,0
-	beq	1f
-	addi	r4,r4,THREAD	/* want THREAD of last_task_used_spe */
-	SAVE_32EVRS(0,r10,r4,THREAD_EVR0)
-	evxor	evr10, evr10, evr10	/* clear out evr10 */
-	evmwumiaa evr10, evr10, evr10	/* evr10 <- ACC = 0 * 0 + ACC */
-	li	r5,THREAD_ACC
-	evstddx	evr10, r4, r5		/* save off accumulator */
-	lwz	r5,PT_REGS(r4)
-	lwz	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	lis	r10,MSR_SPE@h
-	andc	r4,r4,r10	/* disable SPE for previous task */
-	stw	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* !CONFIG_SMP */
 	/* enable use of SPE after return */
 	oris	r9,r9,MSR_SPE@h
 	mfspr	r5,SPRN_SPRG_THREAD	/* current task's THREAD (phys) */
@@ -889,10 +866,6 @@ _GLOBAL(load_up_spe)
 	evlddx	evr4,r10,r5
 	evmra	evr4,evr4
 	REST_32EVRS(0,r10,r5,THREAD_EVR0)
-#ifndef CONFIG_SMP
-	subi	r4,r5,THREAD
-	stw	r4,last_task_used_spe@l(r3)
-#endif /* !CONFIG_SMP */
 	blr
 
 /*
@@ -1035,11 +1008,6 @@ _GLOBAL(giveup_spe)
 	andc	r4,r4,r3		/* disable SPE for previous task */
 	stw	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
 1:
-#ifndef CONFIG_SMP
-	li	r5,0
-	lis	r4,last_task_used_spe@ha
-	stw	r5,last_task_used_spe@l(r4)
-#endif /* !CONFIG_SMP */
 	blr
 #endif /* CONFIG_SPE */
 
diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S
index 112ccf497562..cf4fb5429cf1 100644
--- a/arch/powerpc/kernel/idle_power7.S
+++ b/arch/powerpc/kernel/idle_power7.S
@@ -89,13 +89,6 @@ _GLOBAL(power7_powersave_common)
 	std	r0,_LINK(r1)
 	std	r0,_NIP(r1)
 
-#ifndef CONFIG_SMP
-	/* Make sure FPU, VSX etc... are flushed as we may lose
-	 * state when going to nap mode
-	 */
-	bl	discard_lazy_cpu_state
-#endif /* CONFIG_SMP */
-
 	/* Hard disable interrupts */
 	mfmsr	r9
 	rldicl	r9,r9,48,1
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 3aabed4a60a9..e098f4315643 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -67,13 +67,6 @@
 
 extern unsigned long _get_SP(void);
 
-#ifndef CONFIG_SMP
-struct task_struct *last_task_used_math = NULL;
-struct task_struct *last_task_used_altivec = NULL;
-struct task_struct *last_task_used_vsx = NULL;
-struct task_struct *last_task_used_spe = NULL;
-#endif
-
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
 void giveup_fpu_maybe_transactional(struct task_struct *tsk)
 {
@@ -134,16 +127,14 @@ void flush_fp_to_thread(struct task_struct *tsk)
 		 */
 		preempt_disable();
 		if (tsk->thread.regs->msr & MSR_FP) {
-#ifdef CONFIG_SMP
 			/*
 			 * This should only ever be called for current or
 			 * for a stopped child process.  Since we save away
-			 * the FP register state on context switch on SMP,
+			 * the FP register state on context switch,
 			 * there is something wrong if a stopped child appears
 			 * to still have its FP state in the CPU registers.
 			 */
 			BUG_ON(tsk != current);
-#endif
 			giveup_fpu_maybe_transactional(tsk);
 		}
 		preempt_enable();
@@ -156,14 +147,10 @@ void enable_kernel_fp(void)
 {
 	WARN_ON(preemptible());
 
-#ifdef CONFIG_SMP
 	if (current->thread.regs && (current->thread.regs->msr & MSR_FP))
 		giveup_fpu_maybe_transactional(current);
 	else
 		giveup_fpu(NULL);	/* just enables FP for kernel */
-#else
-	giveup_fpu_maybe_transactional(last_task_used_math);
-#endif /* CONFIG_SMP */
 }
 EXPORT_SYMBOL(enable_kernel_fp);
 
@@ -172,14 +159,10 @@ void enable_kernel_altivec(void)
 {
 	WARN_ON(preemptible());
 
-#ifdef CONFIG_SMP
 	if (current->thread.regs && (current->thread.regs->msr & MSR_VEC))
 		giveup_altivec_maybe_transactional(current);
 	else
 		giveup_altivec_notask();
-#else
-	giveup_altivec_maybe_transactional(last_task_used_altivec);
-#endif /* CONFIG_SMP */
 }
 EXPORT_SYMBOL(enable_kernel_altivec);
 
@@ -192,9 +175,7 @@ void flush_altivec_to_thread(struct task_struct *tsk)
 	if (tsk->thread.regs) {
 		preempt_disable();
 		if (tsk->thread.regs->msr & MSR_VEC) {
-#ifdef CONFIG_SMP
 			BUG_ON(tsk != current);
-#endif
 			giveup_altivec_maybe_transactional(tsk);
 		}
 		preempt_enable();
@@ -208,14 +189,10 @@ void enable_kernel_vsx(void)
 {
 	WARN_ON(preemptible());
 
-#ifdef CONFIG_SMP
 	if (current->thread.regs && (current->thread.regs->msr & MSR_VSX))
 		giveup_vsx(current);
 	else
 		giveup_vsx(NULL);	/* just enable vsx for kernel - force */
-#else
-	giveup_vsx(last_task_used_vsx);
-#endif /* CONFIG_SMP */
 }
 EXPORT_SYMBOL(enable_kernel_vsx);
 
@@ -232,9 +209,7 @@ void flush_vsx_to_thread(struct task_struct *tsk)
 	if (tsk->thread.regs) {
 		preempt_disable();
 		if (tsk->thread.regs->msr & MSR_VSX) {
-#ifdef CONFIG_SMP
 			BUG_ON(tsk != current);
-#endif
 			giveup_vsx(tsk);
 		}
 		preempt_enable();
@@ -249,14 +224,10 @@ void enable_kernel_spe(void)
 {
 	WARN_ON(preemptible());
 
-#ifdef CONFIG_SMP
 	if (current->thread.regs && (current->thread.regs->msr & MSR_SPE))
 		giveup_spe(current);
 	else
 		giveup_spe(NULL);	/* just enable SPE for kernel - force */
-#else
-	giveup_spe(last_task_used_spe);
-#endif /* __SMP __ */
 }
 EXPORT_SYMBOL(enable_kernel_spe);
 
@@ -265,9 +236,7 @@ void flush_spe_to_thread(struct task_struct *tsk)
 	if (tsk->thread.regs) {
 		preempt_disable();
 		if (tsk->thread.regs->msr & MSR_SPE) {
-#ifdef CONFIG_SMP
 			BUG_ON(tsk != current);
-#endif
 			tsk->thread.spefscr = mfspr(SPRN_SPEFSCR);
 			giveup_spe(tsk);
 		}
@@ -276,32 +245,6 @@ void flush_spe_to_thread(struct task_struct *tsk)
 }
 #endif /* CONFIG_SPE */
 
-#ifndef CONFIG_SMP
-/*
- * If we are doing lazy switching of CPU state (FP, altivec or SPE),
- * and the current task has some state, discard it.
- */
-void discard_lazy_cpu_state(void)
-{
-	preempt_disable();
-	if (last_task_used_math == current)
-		last_task_used_math = NULL;
-#ifdef CONFIG_ALTIVEC
-	if (last_task_used_altivec == current)
-		last_task_used_altivec = NULL;
-#endif /* CONFIG_ALTIVEC */
-#ifdef CONFIG_VSX
-	if (last_task_used_vsx == current)
-		last_task_used_vsx = NULL;
-#endif /* CONFIG_VSX */
-#ifdef CONFIG_SPE
-	if (last_task_used_spe == current)
-		last_task_used_spe = NULL;
-#endif
-	preempt_enable();
-}
-#endif /* CONFIG_SMP */
-
 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
 void do_send_trap(struct pt_regs *regs, unsigned long address,
 		  unsigned long error_code, int signal_code, int breakpt)
@@ -831,30 +774,9 @@ struct task_struct *__switch_to(struct task_struct *prev,
 
 	__switch_to_tm(prev);
 
-#ifdef CONFIG_SMP
-	/* avoid complexity of lazy save/restore of fpu
-	 * by just saving it every time we switch out if
-	 * this task used the fpu during the last quantum.
-	 *
-	 * If it tries to use the fpu again, it'll trap and
-	 * reload its fp regs.  So we don't have to do a restore
-	 * every switch, just a save.
-	 *  -- Cort
-	 */
 	if (prev->thread.regs && (prev->thread.regs->msr & MSR_FP))
 		giveup_fpu(prev);
 #ifdef CONFIG_ALTIVEC
-	/*
-	 * If the previous thread used altivec in the last quantum
-	 * (thus changing altivec regs) then save them.
-	 * We used to check the VRSAVE register but not all apps
-	 * set it, so we don't rely on it now (and in fact we need
-	 * to save & restore VSCR even if VRSAVE == 0).  -- paulus
-	 *
-	 * On SMP we always save/restore altivec regs just to avoid the
-	 * complexity of changing processors.
-	 *  -- Cort
-	 */
 	if (prev->thread.regs && (prev->thread.regs->msr & MSR_VEC))
 		giveup_altivec(prev);
 #endif /* CONFIG_ALTIVEC */
@@ -864,39 +786,10 @@ struct task_struct *__switch_to(struct task_struct *prev,
 		__giveup_vsx(prev);
 #endif /* CONFIG_VSX */
 #ifdef CONFIG_SPE
-	/*
-	 * If the previous thread used spe in the last quantum
-	 * (thus changing spe regs) then save them.
-	 *
-	 * On SMP we always save/restore spe regs just to avoid the
-	 * complexity of changing processors.
-	 */
 	if ((prev->thread.regs && (prev->thread.regs->msr & MSR_SPE)))
 		giveup_spe(prev);
 #endif /* CONFIG_SPE */
 
-#else  /* CONFIG_SMP */
-#ifdef CONFIG_ALTIVEC
-	/* Avoid the trap.  On smp this this never happens since
-	 * we don't set last_task_used_altivec -- Cort
-	 */
-	if (new->thread.regs && last_task_used_altivec == new)
-		new->thread.regs->msr |= MSR_VEC;
-#endif /* CONFIG_ALTIVEC */
-#ifdef CONFIG_VSX
-	if (new->thread.regs && last_task_used_vsx == new)
-		new->thread.regs->msr |= MSR_VSX;
-#endif /* CONFIG_VSX */
-#ifdef CONFIG_SPE
-	/* Avoid the trap.  On smp this this never happens since
-	 * we don't set last_task_used_spe
-	 */
-	if (new->thread.regs && last_task_used_spe == new)
-		new->thread.regs->msr |= MSR_SPE;
-#endif /* CONFIG_SPE */
-
-#endif /* CONFIG_SMP */
-
 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
 	switch_booke_debug_regs(&new->thread.debug);
 #else
@@ -1111,13 +1004,10 @@ void show_regs(struct pt_regs * regs)
 
 void exit_thread(void)
 {
-	discard_lazy_cpu_state();
 }
 
 void flush_thread(void)
 {
-	discard_lazy_cpu_state();
-
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
 	flush_ptrace_hw_breakpoint(current);
 #else /* CONFIG_HAVE_HW_BREAKPOINT */
@@ -1355,7 +1245,6 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp)
 		regs->msr = MSR_USER32;
 	}
 #endif
-	discard_lazy_cpu_state();
 #ifdef CONFIG_VSX
 	current->thread.used_vsr = 0;
 #endif
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index 0dbee465af7a..3cd7a32c8ff4 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -687,15 +687,6 @@ static long restore_user_regs(struct pt_regs *regs,
 	if (sig)
 		regs->msr = (regs->msr & ~MSR_LE) | (msr & MSR_LE);
 
-	/*
-	 * Do this before updating the thread state in
-	 * current->thread.fpr/vr/evr.  That way, if we get preempted
-	 * and another task grabs the FPU/Altivec/SPE, it won't be
-	 * tempted to save the current CPU state into the thread_struct
-	 * and corrupt what we are writing there.
-	 */
-	discard_lazy_cpu_state();
-
 #ifdef CONFIG_ALTIVEC
 	/*
 	 * Force the process to reload the altivec registers from
@@ -798,15 +789,6 @@ static long restore_tm_user_regs(struct pt_regs *regs,
 	/* Restore the previous little-endian mode */
 	regs->msr = (regs->msr & ~MSR_LE) | (msr & MSR_LE);
 
-	/*
-	 * Do this before updating the thread state in
-	 * current->thread.fpr/vr/evr.  That way, if we get preempted
-	 * and another task grabs the FPU/Altivec/SPE, it won't be
-	 * tempted to save the current CPU state into the thread_struct
-	 * and corrupt what we are writing there.
-	 */
-	discard_lazy_cpu_state();
-
 #ifdef CONFIG_ALTIVEC
 	regs->msr &= ~MSR_VEC;
 	if (msr & MSR_VEC) {
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index 20756dfb9f34..6f2b555516e6 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -349,15 +349,6 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig,
 	if (set != NULL)
 		err |=  __get_user(set->sig[0], &sc->oldmask);
 
-	/*
-	 * Do this before updating the thread state in
-	 * current->thread.fpr/vr.  That way, if we get preempted
-	 * and another task grabs the FPU/Altivec, it won't be
-	 * tempted to save the current CPU state into the thread_struct
-	 * and corrupt what we are writing there.
-	 */
-	discard_lazy_cpu_state();
-
 	/*
 	 * Force reload of FP/VEC.
 	 * This has to be done before copying stuff into current->thread.fpr/vr
@@ -464,15 +455,6 @@ static long restore_tm_sigcontexts(struct pt_regs *regs,
 	err |= __get_user(regs->dsisr, &sc->gp_regs[PT_DSISR]);
 	err |= __get_user(regs->result, &sc->gp_regs[PT_RESULT]);
 
-	/*
-	 * Do this before updating the thread state in
-	 * current->thread.fpr/vr.  That way, if we get preempted
-	 * and another task grabs the FPU/Altivec, it won't be
-	 * tempted to save the current CPU state into the thread_struct
-	 * and corrupt what we are writing there.
-	 */
-	discard_lazy_cpu_state();
-
 	/*
 	 * Force reload of FP/VEC.
 	 * This has to be done before copying stuff into current->thread.fpr/vr
diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S
index 1c5425966204..1757c0c936c1 100644
--- a/arch/powerpc/kernel/vector.S
+++ b/arch/powerpc/kernel/vector.S
@@ -80,39 +80,6 @@ _GLOBAL(load_up_altivec)
 	MTMSRD(r5)			/* enable use of AltiVec now */
 	isync
 
-/*
- * For SMP, we don't do lazy VMX switching because it just gets too
- * horrendously complex, especially when a task switches from one CPU
- * to another.  Instead we call giveup_altvec in switch_to.
- * VRSAVE isn't dealt with here, that is done in the normal context
- * switch code. Note that we could rely on vrsave value to eventually
- * avoid saving all of the VREGs here...
- */
-#ifndef CONFIG_SMP
-	LOAD_REG_ADDRBASE(r3, last_task_used_altivec)
-	toreal(r3)
-	PPC_LL	r4,ADDROFF(last_task_used_altivec)(r3)
-	PPC_LCMPI	0,r4,0
-	beq	1f
-
-	/* Save VMX state to last_task_used_altivec's THREAD struct */
-	toreal(r4)
-	addi	r4,r4,THREAD
-	addi	r6,r4,THREAD_VRSTATE
-	SAVE_32VRS(0,r5,r6)
-	mfvscr	v0
-	li	r10,VRSTATE_VSCR
-	stvx	v0,r10,r6
-	/* Disable VMX for last_task_used_altivec */
-	PPC_LL	r5,PT_REGS(r4)
-	toreal(r5)
-	PPC_LL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	lis	r10,MSR_VEC@h
-	andc	r4,r4,r10
-	PPC_STL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* CONFIG_SMP */
-
 	/* Hack: if we get an altivec unavailable trap with VRSAVE
 	 * set to all zeros, we assume this is a broken application
 	 * that fails to set it properly, and thus we switch it to
@@ -141,12 +108,6 @@ _GLOBAL(load_up_altivec)
 	lvx	v0,r10,r6
 	mtvscr	v0
 	REST_32VRS(0,r4,r6)
-#ifndef CONFIG_SMP
-	/* Update last_task_used_altivec to 'current' */
-	subi	r4,r5,THREAD		/* Back to 'current' */
-	fromreal(r4)
-	PPC_STL	r4,ADDROFF(last_task_used_altivec)(r3)
-#endif /* CONFIG_SMP */
 	/* restore registers and return */
 	blr
 
@@ -199,11 +160,6 @@ ALT_FTR_SECTION_END_IFSET(CPU_FTR_VSX)
 	andc	r4,r4,r3		/* disable FP for previous task */
 	PPC_STL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
 1:
-#ifndef CONFIG_SMP
-	li	r5,0
-	LOAD_REG_ADDRBASE(r4,last_task_used_altivec)
-	PPC_STL	r5,ADDROFF(last_task_used_altivec)(r4)
-#endif /* CONFIG_SMP */
 	blr
 
 #ifdef CONFIG_VSX
@@ -226,20 +182,6 @@ _GLOBAL(load_up_vsx)
 	andis.	r5,r12,MSR_VEC@h
 	beql+	load_up_altivec		/* skip if already loaded */
 
-#ifndef CONFIG_SMP
-	ld	r3,last_task_used_vsx@got(r2)
-	ld	r4,0(r3)
-	cmpdi	0,r4,0
-	beq	1f
-	/* Disable VSX for last_task_used_vsx */
-	addi	r4,r4,THREAD
-	ld	r5,PT_REGS(r4)
-	ld	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	lis	r6,MSR_VSX@h
-	andc	r6,r4,r6
-	std	r6,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* CONFIG_SMP */
 	ld	r4,PACACURRENT(r13)
 	addi	r4,r4,THREAD		/* Get THREAD */
 	li	r6,1
@@ -247,11 +189,6 @@ _GLOBAL(load_up_vsx)
 	/* enable use of VSX after return */
 	oris	r12,r12,MSR_VSX@h
 	std	r12,_MSR(r1)
-#ifndef CONFIG_SMP
-	/* Update last_task_used_vsx to 'current' */
-	ld	r4,PACACURRENT(r13)
-	std	r4,0(r3)
-#endif /* CONFIG_SMP */
 	b	fast_exception_return
 
 /*
@@ -277,11 +214,6 @@ _GLOBAL(__giveup_vsx)
 	andc	r4,r4,r3		/* disable VSX for previous task */
 	std	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
 1:
-#ifndef CONFIG_SMP
-	li	r5,0
-	ld	r4,last_task_used_vsx@got(r2)
-	std	r5,0(r4)
-#endif /* CONFIG_SMP */
 	blr
 
 #endif /* CONFIG_VSX */