staging: wlan-ng: fix block comment warnings in p80211conv.c

This patch fix the following checkpatch.pl warnings in p80211conv.c:
WARNING: Block comments should align the * on each line

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Sergio Paracuellos 2016-10-09 17:10:20 +02:00 committed by Greg Kroah-Hartman
parent d3fcb8a276
commit b1a57426d0

View File

@ -1,56 +1,56 @@
/* src/p80211/p80211conv.c
*
* Ether/802.11 conversions and packet buffer routines
*
* Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
* --------------------------------------------------------------------
*
* linux-wlan
*
* The contents of this file are subject to the Mozilla Public
* License Version 1.1 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS
* IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
* implied. See the License for the specific language governing
* rights and limitations under the License.
*
* Alternatively, the contents of this file may be used under the
* terms of the GNU Public License version 2 (the "GPL"), in which
* case the provisions of the GPL are applicable instead of the
* above. If you wish to allow the use of your version of this file
* only under the terms of the GPL and not to allow others to use
* your version of this file under the MPL, indicate your decision
* by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL. If you do not delete
* the provisions above, a recipient may use your version of this
* file under either the MPL or the GPL.
*
* --------------------------------------------------------------------
*
* Inquiries regarding the linux-wlan Open Source project can be
* made directly to:
*
* AbsoluteValue Systems Inc.
* info@linux-wlan.com
* http://www.linux-wlan.com
*
* --------------------------------------------------------------------
*
* Portions of the development of this software were funded by
* Intersil Corporation as part of PRISM(R) chipset product development.
*
* --------------------------------------------------------------------
*
* This file defines the functions that perform Ethernet to/from
* 802.11 frame conversions.
*
* --------------------------------------------------------------------
*
*================================================================
*/
*
* Ether/802.11 conversions and packet buffer routines
*
* Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
* --------------------------------------------------------------------
*
* linux-wlan
*
* The contents of this file are subject to the Mozilla Public
* License Version 1.1 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS
* IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
* implied. See the License for the specific language governing
* rights and limitations under the License.
*
* Alternatively, the contents of this file may be used under the
* terms of the GNU Public License version 2 (the "GPL"), in which
* case the provisions of the GPL are applicable instead of the
* above. If you wish to allow the use of your version of this file
* only under the terms of the GPL and not to allow others to use
* your version of this file under the MPL, indicate your decision
* by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL. If you do not delete
* the provisions above, a recipient may use your version of this
* file under either the MPL or the GPL.
*
* --------------------------------------------------------------------
*
* Inquiries regarding the linux-wlan Open Source project can be
* made directly to:
*
* AbsoluteValue Systems Inc.
* info@linux-wlan.com
* http://www.linux-wlan.com
*
* --------------------------------------------------------------------
*
* Portions of the development of this software were funded by
* Intersil Corporation as part of PRISM(R) chipset product development.
*
* --------------------------------------------------------------------
*
* This file defines the functions that perform Ethernet to/from
* 802.11 frame conversions.
*
* --------------------------------------------------------------------
*
*================================================================
*/
#include <linux/module.h>
#include <linux/kernel.h>
@ -79,31 +79,31 @@ static const u8 oui_rfc1042[] = { 0x00, 0x00, 0x00 };
static const u8 oui_8021h[] = { 0x00, 0x00, 0xf8 };
/*----------------------------------------------------------------
* p80211pb_ether_to_80211
*
* Uses the contents of the ether frame and the etherconv setting
* to build the elements of the 802.11 frame.
*
* We don't actually set
* up the frame header here. That's the MAC's job. We're only handling
* conversion of DIXII or 802.3+LLC frames to something that works
* with 802.11.
*
* Note -- 802.11 header is NOT part of the skb. Likewise, the 802.11
* FCS is also not present and will need to be added elsewhere.
*
* Arguments:
* ethconv Conversion type to perform
* skb skbuff containing the ether frame
* p80211_hdr 802.11 header
*
* Returns:
* 0 on success, non-zero otherwise
*
* Call context:
* May be called in interrupt or non-interrupt context
*----------------------------------------------------------------
*/
* p80211pb_ether_to_80211
*
* Uses the contents of the ether frame and the etherconv setting
* to build the elements of the 802.11 frame.
*
* We don't actually set
* up the frame header here. That's the MAC's job. We're only handling
* conversion of DIXII or 802.3+LLC frames to something that works
* with 802.11.
*
* Note -- 802.11 header is NOT part of the skb. Likewise, the 802.11
* FCS is also not present and will need to be added elsewhere.
*
* Arguments:
* ethconv Conversion type to perform
* skb skbuff containing the ether frame
* p80211_hdr 802.11 header
*
* Returns:
* 0 on success, non-zero otherwise
*
* Call context:
* May be called in interrupt or non-interrupt context
*----------------------------------------------------------------
*/
int skb_ether_to_p80211(struct wlandevice *wlandev, u32 ethconv,
struct sk_buff *skb, union p80211_hdr *p80211_hdr,
struct p80211_metawep *p80211_wep)
@ -255,25 +255,25 @@ static void orinoco_spy_gather(struct wlandevice *wlandev, char *mac,
}
/*----------------------------------------------------------------
* p80211pb_80211_to_ether
*
* Uses the contents of a received 802.11 frame and the etherconv
* setting to build an ether frame.
*
* This function extracts the src and dest address from the 802.11
* frame to use in the construction of the eth frame.
*
* Arguments:
* ethconv Conversion type to perform
* skb Packet buffer containing the 802.11 frame
*
* Returns:
* 0 on success, non-zero otherwise
*
* Call context:
* May be called in interrupt or non-interrupt context
*----------------------------------------------------------------
*/
* p80211pb_80211_to_ether
*
* Uses the contents of a received 802.11 frame and the etherconv
* setting to build an ether frame.
*
* This function extracts the src and dest address from the 802.11
* frame to use in the construction of the eth frame.
*
* Arguments:
* ethconv Conversion type to perform
* skb Packet buffer containing the 802.11 frame
*
* Returns:
* 0 on success, non-zero otherwise
*
* Call context:
* May be called in interrupt or non-interrupt context
*----------------------------------------------------------------
*/
int skb_p80211_to_ether(struct wlandevice *wlandev, u32 ethconv,
struct sk_buff *skb)
{
@ -508,22 +508,22 @@ int skb_p80211_to_ether(struct wlandevice *wlandev, u32 ethconv,
}
/*----------------------------------------------------------------
* p80211_stt_findproto
*
* Searches the 802.1h Selective Translation Table for a given
* protocol.
*
* Arguments:
* proto protocol number (in host order) to search for.
*
* Returns:
* 1 - if the table is empty or a match is found.
* 0 - if the table is non-empty and a match is not found.
*
* Call context:
* May be called in interrupt or non-interrupt context
*----------------------------------------------------------------
*/
* p80211_stt_findproto
*
* Searches the 802.1h Selective Translation Table for a given
* protocol.
*
* Arguments:
* proto protocol number (in host order) to search for.
*
* Returns:
* 1 - if the table is empty or a match is found.
* 0 - if the table is non-empty and a match is not found.
*
* Call context:
* May be called in interrupt or non-interrupt context
*----------------------------------------------------------------
*/
int p80211_stt_findproto(u16 proto)
{
/* Always return found for now. This is the behavior used by the */
@ -540,21 +540,21 @@ int p80211_stt_findproto(u16 proto)
}
/*----------------------------------------------------------------
* p80211skb_rxmeta_detach
*
* Disconnects the frmmeta and rxmeta from an skb.
*
* Arguments:
* wlandev The wlandev this skb belongs to.
* skb The skb we're attaching to.
*
* Returns:
* 0 on success, non-zero otherwise
*
* Call context:
* May be called in interrupt or non-interrupt context
*----------------------------------------------------------------
*/
* p80211skb_rxmeta_detach
*
* Disconnects the frmmeta and rxmeta from an skb.
*
* Arguments:
* wlandev The wlandev this skb belongs to.
* skb The skb we're attaching to.
*
* Returns:
* 0 on success, non-zero otherwise
*
* Call context:
* May be called in interrupt or non-interrupt context
*----------------------------------------------------------------
*/
void p80211skb_rxmeta_detach(struct sk_buff *skb)
{
struct p80211_rxmeta *rxmeta;
@ -584,22 +584,22 @@ void p80211skb_rxmeta_detach(struct sk_buff *skb)
}
/*----------------------------------------------------------------
* p80211skb_rxmeta_attach
*
* Allocates a p80211rxmeta structure, initializes it, and attaches
* it to an skb.
*
* Arguments:
* wlandev The wlandev this skb belongs to.
* skb The skb we're attaching to.
*
* Returns:
* 0 on success, non-zero otherwise
*
* Call context:
* May be called in interrupt or non-interrupt context
*----------------------------------------------------------------
*/
* p80211skb_rxmeta_attach
*
* Allocates a p80211rxmeta structure, initializes it, and attaches
* it to an skb.
*
* Arguments:
* wlandev The wlandev this skb belongs to.
* skb The skb we're attaching to.
*
* Returns:
* 0 on success, non-zero otherwise
*
* Call context:
* May be called in interrupt or non-interrupt context
*----------------------------------------------------------------
*/
int p80211skb_rxmeta_attach(struct wlandevice *wlandev, struct sk_buff *skb)
{
int result = 0;
@ -638,22 +638,22 @@ exit:
}
/*----------------------------------------------------------------
* p80211skb_free
*
* Frees an entire p80211skb by checking and freeing the meta struct
* and then freeing the skb.
*
* Arguments:
* wlandev The wlandev this skb belongs to.
* skb The skb we're attaching to.
*
* Returns:
* 0 on success, non-zero otherwise
*
* Call context:
* May be called in interrupt or non-interrupt context
*----------------------------------------------------------------
*/
* p80211skb_free
*
* Frees an entire p80211skb by checking and freeing the meta struct
* and then freeing the skb.
*
* Arguments:
* wlandev The wlandev this skb belongs to.
* skb The skb we're attaching to.
*
* Returns:
* 0 on success, non-zero otherwise
*
* Call context:
* May be called in interrupt or non-interrupt context
*----------------------------------------------------------------
*/
void p80211skb_free(struct wlandevice *wlandev, struct sk_buff *skb)
{
struct p80211_frmmeta *meta;