FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2024-12-04 05:46:49 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

net: use core MTU range checking in misc drivers

Browse Source 
firewire-net:
- set min/max_mtu
- remove fwnet_change_mtu

nes:
- set max_mtu
- clean up nes_netdev_change_mtu

xpnet:
- set min/max_mtu
- remove xpnet_dev_change_mtu

hippi:
- set min/max_mtu
- remove hippi_change_mtu

batman-adv:
- set max_mtu
- remove batadv_interface_change_mtu
- initialization is a little async, not 100% certain that max_mtu is set
  in the optimal place, don't have hardware to test with

rionet:
- set min/max_mtu
- remove rionet_change_mtu

slip:
- set min/max_mtu
- streamline sl_change_mtu

um/net_kern:
- remove pointless ndo_change_mtu

hsi/clients/ssi_protocol:
- use core MTU range checking
- remove now redundant ssip_pn_set_mtu

ipoib:
- set a default max MTU value
- Note: ipoib's actual max MTU can vary, depending on if the device is in
  connected mode or not, so we'll just set the max_mtu value to the max
  possible, and let the ndo_change_mtu function continue to validate any new
  MTU change requests with checks for CM or not. Note that ipoib has no
  min_mtu set, and thus, the network core's mtu > 0 check is the only lower
  bounds here.

mptlan:
- use net core MTU range checking
- remove now redundant mpt_lan_change_mtu

fddi:
- min_mtu = 21, max_mtu = 4470
- remove now redundant fddi_change_mtu (including export)

fjes:
- min_mtu = 8192, max_mtu = 65536
- The max_mtu value is actually one over IP_MAX_MTU here, but the idea is to
  get past the core net MTU range checks so fjes_change_mtu can validate a
  new MTU against what it supports (see fjes_support_mtu in fjes_hw.c)

hsr:
- min_mtu = 0 (calls ether_setup, max_mtu is 1500)

f_phonet:
- min_mtu = 6, max_mtu = 65541

u_ether:
- min_mtu = 14, max_mtu = 15412

phonet/pep-gprs:
- min_mtu = 576, max_mtu = 65530
- remove redundant gprs_set_mtu

CC: netdev@vger.kernel.org
CC: linux-rdma@vger.kernel.org
CC: Stefan Richter <stefanr@s5r6.in-berlin.de>
CC: Faisal Latif <faisal.latif@intel.com>
CC: linux-rdma@vger.kernel.org
CC: Cliff Whickman <cpw@sgi.com>
CC: Robin Holt <robinmholt@gmail.com>
CC: Jes Sorensen <jes@trained-monkey.org>
CC: Marek Lindner <mareklindner@neomailbox.ch>
CC: Simon Wunderlich <sw@simonwunderlich.de>
CC: Antonio Quartulli <a@unstable.cc>
CC: Sathya Prakash <sathya.prakash@broadcom.com>
CC: Chaitra P B <chaitra.basappa@broadcom.com>
CC: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
CC: MPT-FusionLinux.pdl@broadcom.com
CC: Sebastian Reichel <sre@kernel.org>
CC: Felipe Balbi <balbi@kernel.org>
CC: Arvid Brodin <arvid.brodin@alten.se>
CC: Remi Denis-Courmont <courmisch@gmail.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Jarod Wilson 2016-10-20 13:55:22 -04:00 committed by David S. Miller
parent d0c2c9973e
commit b3e3893e12
23 changed files with 46 additions and 154 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
arch/um/drivers/net_kern.c
View File

@ -256,13 +256,6 @@ static void uml_net_tx_timeout(struct net_device *dev)
netif_wake_queue(dev);
}
static int uml_net_change_mtu(struct net_device *dev, int new_mtu)
{
dev->mtu = new_mtu;
return 0;
}
#ifdef CONFIG_NET_POLL_CONTROLLER
static void uml_net_poll_controller(struct net_device *dev)
{
@ -374,7 +367,6 @@ static const struct net_device_ops uml_netdev_ops = {
.ndo_set_rx_mode = uml_net_set_multicast_list,
.ndo_tx_timeout = uml_net_tx_timeout,
.ndo_set_mac_address = eth_mac_addr,
.ndo_change_mtu = uml_net_change_mtu,
.ndo_validate_addr = eth_validate_addr,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = uml_net_poll_controller,

18
drivers/firewire/net.c
View File

@ -1349,15 +1349,6 @@ static netdev_tx_t fwnet_tx(struct sk_buff *skb, struct net_device *net)
return NETDEV_TX_OK;
}
static int fwnet_change_mtu(struct net_device *net, int new_mtu)
{
if (new_mtu < 68)
return -EINVAL;
net->mtu = new_mtu;
return 0;
}
static const struct ethtool_ops fwnet_ethtool_ops = {
.get_link = ethtool_op_get_link,
};
@ -1366,7 +1357,6 @@ static const struct net_device_ops fwnet_netdev_ops = {
.ndo_open = fwnet_open,
.ndo_stop = fwnet_stop,
.ndo_start_xmit = fwnet_tx,
.ndo_change_mtu = fwnet_change_mtu,
};
static void fwnet_init_dev(struct net_device *net)
@ -1435,7 +1425,6 @@ static int fwnet_probe(struct fw_unit *unit,
struct net_device *net;
bool allocated_netdev = false;
struct fwnet_device *dev;
unsigned max_mtu;
int ret;
union fwnet_hwaddr *ha;
@ -1478,9 +1467,10 @@ static int fwnet_probe(struct fw_unit *unit,
* Use the RFC 2734 default 1500 octets or the maximum payload
* as initial MTU
*/
max_mtu = (1 << (card->max_receive + 1))
- sizeof(struct rfc2734_header) - IEEE1394_GASP_HDR_SIZE;
net->mtu = min(1500U, max_mtu);
net->max_mtu = (1 << (card->max_receive + 1))
- sizeof(struct rfc2734_header) - IEEE1394_GASP_HDR_SIZE;
net->mtu = min(1500U, net->max_mtu);
net->min_mtu = ETH_MIN_MTU;
/* Set our hardware address while we're at it */
ha = (union fwnet_hwaddr *)net->dev_addr;

14
drivers/hsi/clients/ssi_protocol.c
View File

@ -960,15 +960,6 @@ static int ssip_pn_stop(struct net_device *dev)
return 0;
}
static int ssip_pn_set_mtu(struct net_device *dev, int new_mtu)
{
if (new_mtu > SSIP_MAX_MTU || new_mtu < PHONET_MIN_MTU)
return -EINVAL;
dev->mtu = new_mtu;
return 0;
}
static void ssip_xmit_work(struct work_struct *work)
{
struct ssi_protocol *ssi =
@ -1060,7 +1051,6 @@ static const struct net_device_ops ssip_pn_ops = {
.ndo_open = ssip_pn_open,
.ndo_stop = ssip_pn_stop,
.ndo_start_xmit = ssip_pn_xmit,
.ndo_change_mtu = ssip_pn_set_mtu,
};
static void ssip_pn_setup(struct net_device *dev)
@ -1136,6 +1126,10 @@ static int ssi_protocol_probe(struct device *dev)
goto out1;
}
/* MTU range: 6 - 65535 */
ssi->netdev->min_mtu = PHONET_MIN_MTU;
ssi->netdev->max_mtu = SSIP_MAX_MTU;
SET_NETDEV_DEV(ssi->netdev, dev);
netif_carrier_off(ssi->netdev);
err = register_netdev(ssi->netdev);

1
drivers/infiniband/hw/nes/nes.c
View File

@ -65,7 +65,6 @@ MODULE_DESCRIPTION("NetEffect RNIC Low-level iWARP Driver");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_VERSION(DRV_VERSION);
int max_mtu = 9000;
int interrupt_mod_interval = 0;
/* Interoperability */

4
drivers/infiniband/hw/nes/nes.h
View File

@ -83,6 +83,8 @@
#define NES_FIRST_QPN 64
#define NES_SW_CONTEXT_ALIGN 1024
#define NES_MAX_MTU 9000
#define NES_NIC_MAX_NICS 16
#define NES_MAX_ARP_TABLE_SIZE 4096
@ -169,8 +171,6 @@ do { \
#include "nes_cm.h"
#include "nes_mgt.h"
extern int max_mtu;
#define max_frame_len (max_mtu+ETH_HLEN)
extern int interrupt_mod_interval;
extern int nes_if_count;
extern int mpa_version;

10
drivers/infiniband/hw/nes/nes_nic.c
View File

@ -981,20 +981,16 @@ static int nes_netdev_change_mtu(struct net_device *netdev, int new_mtu)
{
struct nes_vnic *nesvnic = netdev_priv(netdev);
struct nes_device *nesdev = nesvnic->nesdev;
int ret = 0;
u8 jumbomode = 0;
u32 nic_active;
u32 nic_active_bit;
u32 uc_all_active;
u32 mc_all_active;
if ((new_mtu < ETH_ZLEN) || (new_mtu > max_mtu))
return -EINVAL;
netdev->mtu = new_mtu;
nesvnic->max_frame_size = new_mtu + VLAN_ETH_HLEN;
if (netdev->mtu > 1500) {
if (netdev->mtu > ETH_DATA_LEN) {
jumbomode=1;
}
nes_nic_init_timer_defaults(nesdev, jumbomode);
@ -1020,7 +1016,7 @@ static int nes_netdev_change_mtu(struct net_device *netdev, int new_mtu)
nes_write_indexed(nesdev, NES_IDX_NIC_UNICAST_ALL, nic_active);
}
return ret;
return 0;
}
@ -1658,7 +1654,7 @@ struct net_device *nes_netdev_init(struct nes_device *nesdev,
netdev->watchdog_timeo = NES_TX_TIMEOUT;
netdev->irq = nesdev->pcidev->irq;
netdev->mtu = ETH_DATA_LEN;
netdev->max_mtu = NES_MAX_MTU;
netdev->hard_header_len = ETH_HLEN;
netdev->addr_len = ETH_ALEN;
netdev->type = ARPHRD_ETHER;

1
drivers/infiniband/ulp/ipoib/ipoib_main.c
View File

@ -2017,6 +2017,7 @@ static struct net_device *ipoib_add_port(const char *format,
/* MTU will be reset when mcast join happens */
priv->dev->mtu = IPOIB_UD_MTU(priv->max_ib_mtu);
priv->mcast_mtu = priv->admin_mtu = priv->dev->mtu;
priv->dev->max_mtu = IPOIB_CM_MTU;
priv->dev->neigh_priv_len = sizeof(struct ipoib_neigh);

15
drivers/message/fusion/mptlan.c
View File

@ -548,16 +548,6 @@ mpt_lan_close(struct net_device *dev)
return 0;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
static int
mpt_lan_change_mtu(struct net_device *dev, int new_mtu)
{
if ((new_mtu < MPT_LAN_MIN_MTU) || (new_mtu > MPT_LAN_MAX_MTU))
return -EINVAL;
dev->mtu = new_mtu;
return 0;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/* Tx timeout handler. */
static void
@ -1304,7 +1294,6 @@ static const struct net_device_ops mpt_netdev_ops = {
.ndo_open = mpt_lan_open,
.ndo_stop = mpt_lan_close,
.ndo_start_xmit = mpt_lan_sdu_send,
.ndo_change_mtu = mpt_lan_change_mtu,
.ndo_tx_timeout = mpt_lan_tx_timeout,
};
@ -1375,6 +1364,10 @@ mpt_register_lan_device (MPT_ADAPTER *mpt_dev, int pnum)
dev->netdev_ops = &mpt_netdev_ops;
dev->watchdog_timeo = MPT_LAN_TX_TIMEOUT;
/* MTU range: 96 - 65280 */
dev->min_mtu = MPT_LAN_MIN_MTU;
dev->max_mtu = MPT_LAN_MAX_MTU;
dlprintk((KERN_INFO MYNAM ": Finished registering dev "
"and setting initial values\n"));

21
drivers/misc/sgi-xp/xpnet.c
View File

@ -118,6 +118,8 @@ static DEFINE_SPINLOCK(xpnet_broadcast_lock);
* now, the default is 64KB.
*/
#define XPNET_MAX_MTU (0x800000UL - L1_CACHE_BYTES)
/* 68 comes from min TCP+IP+MAC header */
#define XPNET_MIN_MTU 68
/* 32KB has been determined to be the ideal */
#define XPNET_DEF_MTU (0x8000UL)
@ -330,22 +332,6 @@ xpnet_dev_stop(struct net_device *dev)
return 0;
}
static int
xpnet_dev_change_mtu(struct net_device *dev, int new_mtu)
{
/* 68 comes from min TCP+IP+MAC header */
if ((new_mtu < 68) || (new_mtu > XPNET_MAX_MTU)) {
dev_err(xpnet, "ifconfig %s mtu %d failed; value must be "
"between 68 and %ld\n", dev->name, new_mtu,
XPNET_MAX_MTU);
return -EINVAL;
}
dev->mtu = new_mtu;
dev_dbg(xpnet, "ifconfig %s mtu set to %d\n", dev->name, new_mtu);
return 0;
}
/*
* Notification that the other end has received the message and
* DMA'd the skb information. At this point, they are done with
@ -519,7 +505,6 @@ static const struct net_device_ops xpnet_netdev_ops = {
.ndo_open = xpnet_dev_open,
.ndo_stop = xpnet_dev_stop,
.ndo_start_xmit = xpnet_dev_hard_start_xmit,
.ndo_change_mtu = xpnet_dev_change_mtu,
.ndo_tx_timeout = xpnet_dev_tx_timeout,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
@ -555,6 +540,8 @@ xpnet_init(void)
xpnet_device->netdev_ops = &xpnet_netdev_ops;
xpnet_device->mtu = XPNET_DEF_MTU;
xpnet_device->min_mtu = XPNET_MIN_MTU;
xpnet_device->max_mtu = XPNET_MAX_MTU;
/*
* Multicast assumes the LSB of the first octet is set for multicast

1
drivers/net/fddi/skfp/skfddi.c
View File

@ -166,7 +166,6 @@ static const struct net_device_ops skfp_netdev_ops = {
.ndo_stop = skfp_close,
.ndo_start_xmit = skfp_send_pkt,
.ndo_get_stats = skfp_ctl_get_stats,
.ndo_change_mtu = fddi_change_mtu,
.ndo_set_rx_mode = skfp_ctl_set_multicast_list,
.ndo_set_mac_address = skfp_ctl_set_mac_address,
.ndo_do_ioctl = skfp_ioctl,

2
drivers/net/fjes/fjes_main.c
View File

@ -1316,6 +1316,8 @@ static void fjes_netdev_setup(struct net_device *netdev)
netdev->netdev_ops = &fjes_netdev_ops;
fjes_set_ethtool_ops(netdev);
netdev->mtu = fjes_support_mtu[3];
netdev->min_mtu = fjes_support_mtu[0];
netdev->max_mtu = fjes_support_mtu[3];
netdev->flags |= IFF_BROADCAST;
netdev->features |= NETIF_F_HW_CSUM | NETIF_F_HW_VLAN_CTAG_FILTER;
}

1
drivers/net/hippi/rrunner.c
View File

@ -68,7 +68,6 @@ static const struct net_device_ops rr_netdev_ops = {
.ndo_stop = rr_close,
.ndo_do_ioctl = rr_ioctl,
.ndo_start_xmit = rr_start_xmit,
.ndo_change_mtu = hippi_change_mtu,
.ndo_set_mac_address = hippi_mac_addr,
};

15
drivers/net/rionet.c
View File

@ -466,17 +466,6 @@ static void rionet_set_msglevel(struct net_device *ndev, u32 value)
rnet->msg_enable = value;
}
static int rionet_change_mtu(struct net_device *ndev, int new_mtu)
{
if ((new_mtu < 68) || (new_mtu > RIONET_MAX_MTU)) {
printk(KERN_ERR "%s: Invalid MTU size %d\n",
ndev->name, new_mtu);
return -EINVAL;
}
ndev->mtu = new_mtu;
return 0;
}
static const struct ethtool_ops rionet_ethtool_ops = {
.get_drvinfo = rionet_get_drvinfo,
.get_msglevel = rionet_get_msglevel,
@ -488,7 +477,6 @@ static const struct net_device_ops rionet_netdev_ops = {
.ndo_open = rionet_open,
.ndo_stop = rionet_close,
.ndo_start_xmit = rionet_start_xmit,
.ndo_change_mtu = rionet_change_mtu,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = eth_mac_addr,
};
@ -525,6 +513,9 @@ static int rionet_setup_netdev(struct rio_mport *mport, struct net_device *ndev)
ndev->netdev_ops = &rionet_netdev_ops;
ndev->mtu = RIONET_MAX_MTU;
/* MTU range: 68 - 4082 */
ndev->min_mtu = ETH_MIN_MTU;
ndev->max_mtu = RIONET_MAX_MTU;
ndev->features = NETIF_F_LLTX;
SET_NETDEV_DEV(ndev, &mport->dev);
ndev->ethtool_ops = &rionet_ethtool_ops;

11
drivers/net/slip/slip.c
View File

@ -561,12 +561,7 @@ static int sl_change_mtu(struct net_device *dev, int new_mtu)
{
struct slip *sl = netdev_priv(dev);
if (new_mtu < 68 || new_mtu > 65534)
return -EINVAL;
if (new_mtu != dev->mtu)
return sl_realloc_bufs(sl, new_mtu);
return 0;
return sl_realloc_bufs(sl, new_mtu);
}
/* Netdevice get statistics request */
@ -663,6 +658,10 @@ static void sl_setup(struct net_device *dev)
dev->addr_len = 0;
dev->tx_queue_len = 10;
/* MTU range: 68 - 65534 */
dev->min_mtu = 68;
dev->max_mtu = 65534;
/* New-style flags. */
dev->flags = IFF_NOARP|IFF_POINTOPOINT|IFF_MULTICAST;
}

11
drivers/usb/gadget/function/f_phonet.c
View File

@ -261,19 +261,10 @@ out:
return NETDEV_TX_OK;
}
static int pn_net_mtu(struct net_device *dev, int new_mtu)
{
if ((new_mtu < PHONET_MIN_MTU) || (new_mtu > PHONET_MAX_MTU))
return -EINVAL;
dev->mtu = new_mtu;
return 0;
}
static const struct net_device_ops pn_netdev_ops = {
.ndo_open = pn_net_open,
.ndo_stop = pn_net_close,
.ndo_start_xmit = pn_net_xmit,
.ndo_change_mtu = pn_net_mtu,
};
static void pn_net_setup(struct net_device *dev)
@ -282,6 +273,8 @@ static void pn_net_setup(struct net_device *dev)
dev->type = ARPHRD_PHONET;
dev->flags = IFF_POINTOPOINT | IFF_NOARP;
dev->mtu = PHONET_DEV_MTU;
dev->min_mtu = PHONET_MIN_MTU;
dev->max_mtu = PHONET_MAX_MTU;
dev->hard_header_len = 1;
dev->dev_addr[0] = PN_MEDIA_USB;
dev->addr_len = 1;

14
drivers/usb/gadget/function/u_ether.c
View File

@ -142,15 +142,6 @@ static inline int qlen(struct usb_gadget *gadget, unsigned qmult)
/* NETWORK DRIVER HOOKUP (to the layer above this driver) */
static int ueth_change_mtu(struct net_device *net, int new_mtu)
{
if (new_mtu <= ETH_HLEN || new_mtu > GETHER_MAX_ETH_FRAME_LEN)
return -ERANGE;
net->mtu = new_mtu;
return 0;
}
static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p)
{
struct eth_dev *dev = netdev_priv(net);
@ -736,7 +727,6 @@ static const struct net_device_ops eth_netdev_ops = {
.ndo_open = eth_open,
.ndo_stop = eth_stop,
.ndo_start_xmit = eth_start_xmit,
.ndo_change_mtu = ueth_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
};
@ -799,6 +789,10 @@ struct eth_dev *gether_setup_name(struct usb_gadget *g,
net->ethtool_ops = &ops;
/* MTU range: 14 - 15412 */
net->min_mtu = ETH_HLEN;
net->max_mtu = GETHER_MAX_ETH_FRAME_LEN;
dev->gadget = g;
SET_NETDEV_DEV(net, &g->dev);
SET_NETDEV_DEVTYPE(net, &gadget_type);

1
include/linux/fddidevice.h
View File

@ -26,7 +26,6 @@
#ifdef __KERNEL__
__be16 fddi_type_trans(struct sk_buff *skb, struct net_device *dev);
int fddi_change_mtu(struct net_device *dev, int new_mtu);
struct net_device *alloc_fddidev(int sizeof_priv);
#endif

1
include/linux/hippidevice.h
View File

@ -32,7 +32,6 @@ struct hippi_cb {
};
__be16 hippi_type_trans(struct sk_buff *skb, struct net_device *dev);
int hippi_change_mtu(struct net_device *dev, int new_mtu);
int hippi_mac_addr(struct net_device *dev, void *p);
int hippi_neigh_setup_dev(struct net_device *dev, struct neigh_parms *p);
struct net_device *alloc_hippi_dev(int sizeof_priv);

11
net/802/fddi.c
View File

@ -141,15 +141,6 @@ __be16 fddi_type_trans(struct sk_buff *skb, struct net_device *dev)
EXPORT_SYMBOL(fddi_type_trans);
int fddi_change_mtu(struct net_device *dev, int new_mtu)
{
if ((new_mtu < FDDI_K_SNAP_HLEN) || (new_mtu > FDDI_K_SNAP_DLEN))
return -EINVAL;
dev->mtu = new_mtu;
return 0;
}
EXPORT_SYMBOL(fddi_change_mtu);
static const struct header_ops fddi_header_ops = {
.create = fddi_header,
};
@ -161,6 +152,8 @@ static void fddi_setup(struct net_device *dev)
dev->type = ARPHRD_FDDI;
dev->hard_header_len = FDDI_K_SNAP_HLEN+3; /* Assume 802.2 SNAP hdr len + 3 pad bytes */
dev->mtu = FDDI_K_SNAP_DLEN; /* Assume max payload of 802.2 SNAP frame */
dev->min_mtu = FDDI_K_SNAP_HLEN;
dev->max_mtu = FDDI_K_SNAP_DLEN;
dev->addr_len = FDDI_K_ALEN;
dev->tx_queue_len = 100; /* Long queues on FDDI */
dev->flags = IFF_BROADCAST | IFF_MULTICAST;

14
net/802/hippi.c
View File

@ -116,18 +116,6 @@ __be16 hippi_type_trans(struct sk_buff *skb, struct net_device *dev)
EXPORT_SYMBOL(hippi_type_trans);
int hippi_change_mtu(struct net_device *dev, int new_mtu)
{
/*
* HIPPI's got these nice large MTUs.
*/
if ((new_mtu < 68) || (new_mtu > 65280))
return -EINVAL;
dev->mtu = new_mtu;
return 0;
}
EXPORT_SYMBOL(hippi_change_mtu);
/*
* For HIPPI we will actually use the lower 4 bytes of the hardware
* address as the I-FIELD rather than the actual hardware address.
@ -174,6 +162,8 @@ static void hippi_setup(struct net_device *dev)
dev->type = ARPHRD_HIPPI;
dev->hard_header_len = HIPPI_HLEN;
dev->mtu = 65280;
dev->min_mtu = 68;
dev->max_mtu = 65280;
dev->addr_len = HIPPI_ALEN;
dev->tx_queue_len = 25 /* 5 */;
memset(dev->broadcast, 0xFF, HIPPI_ALEN);

13
net/batman-adv/soft-interface.c
View File

@ -158,17 +158,6 @@ static int batadv_interface_set_mac_addr(struct net_device *dev, void *p)
return 0;
}
static int batadv_interface_change_mtu(struct net_device *dev, int new_mtu)
{
/* check ranges */
if ((new_mtu < 68) || (new_mtu > batadv_hardif_min_mtu(dev)))
return -EINVAL;
dev->mtu = new_mtu;
return 0;
}
/**
* batadv_interface_set_rx_mode - set the rx mode of a device
* @dev: registered network device to modify
@ -920,7 +909,6 @@ static const struct net_device_ops batadv_netdev_ops = {
.ndo_vlan_rx_add_vid = batadv_interface_add_vid,
.ndo_vlan_rx_kill_vid = batadv_interface_kill_vid,
.ndo_set_mac_address = batadv_interface_set_mac_addr,
.ndo_change_mtu = batadv_interface_change_mtu,
.ndo_set_rx_mode = batadv_interface_set_rx_mode,
.ndo_start_xmit = batadv_interface_tx,
.ndo_validate_addr = eth_validate_addr,
@ -987,6 +975,7 @@ struct net_device *batadv_softif_create(struct net *net, const char *name)
dev_net_set(soft_iface, net);
soft_iface->rtnl_link_ops = &batadv_link_ops;
soft_iface->max_mtu = batadv_hardif_min_mtu(soft_iface);
ret = register_netdevice(soft_iface);
if (ret < 0) {

1
net/hsr/hsr_device.c
View File

@ -398,6 +398,7 @@ void hsr_dev_setup(struct net_device *dev)
random_ether_addr(dev->dev_addr);
ether_setup(dev);
dev->min_mtu = 0;
dev->header_ops = &hsr_header_ops;
dev->netdev_ops = &hsr_device_ops;
SET_NETDEV_DEVTYPE(dev, &hsr_type);

12
net/phonet/pep-gprs.c
View File

@ -217,20 +217,10 @@ static netdev_tx_t gprs_xmit(struct sk_buff *skb, struct net_device *dev)
return NETDEV_TX_OK;
}
static int gprs_set_mtu(struct net_device *dev, int new_mtu)
{
if ((new_mtu < 576) || (new_mtu > (PHONET_MAX_MTU - 11)))
return -EINVAL;
dev->mtu = new_mtu;
return 0;
}
static const struct net_device_ops gprs_netdev_ops = {
.ndo_open = gprs_open,
.ndo_stop = gprs_close,
.ndo_start_xmit = gprs_xmit,
.ndo_change_mtu = gprs_set_mtu,
};
static void gprs_setup(struct net_device *dev)
@ -239,6 +229,8 @@ static void gprs_setup(struct net_device *dev)
dev->type = ARPHRD_PHONET_PIPE;
dev->flags = IFF_POINTOPOINT | IFF_NOARP;
dev->mtu = GPRS_DEFAULT_MTU;
dev->min_mtu = 576;
dev->max_mtu = (PHONET_MAX_MTU - 11);
dev->hard_header_len = 0;
dev->addr_len = 0;
dev->tx_queue_len = 10;