mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-19 07:27:50 +00:00
powerpc/5200: dts: refactor dts files
This patch creates mpc5200b.dtsi containing the information for the MPC5200b SoC then modifies all of the dts files for MPC5200b based systems to use mpc5200b.dtsi. Signed-off-by: John Bonesio <bones@secretlab.ca> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
This commit is contained in:
John Bonesio
Grant Likely
parent
11946c826d
commit
c8bf6b52af
@ -10,226 +10,82 @@
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/include/ "mpc5200b.dtsi"
|
||||
|
||||
/ {
|
||||
model = "schindler,cm5200";
|
||||
compatible = "schindler,cm5200";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
interrupt-parent = <&mpc5200_pic>;
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,5200@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0>;
|
||||
d-cache-line-size = <32>;
|
||||
i-cache-line-size = <32>;
|
||||
d-cache-size = <0x4000>; // L1, 16K
|
||||
i-cache-size = <0x4000>; // L1, 16K
|
||||
timebase-frequency = <0>; // from bootloader
|
||||
bus-frequency = <0>; // from bootloader
|
||||
clock-frequency = <0>; // from bootloader
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x04000000>; // 64MB
|
||||
};
|
||||
|
||||
soc5200@f0000000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,mpc5200b-immr";
|
||||
ranges = <0 0xf0000000 0x0000c000>;
|
||||
reg = <0xf0000000 0x00000100>;
|
||||
bus-frequency = <0>; // from bootloader
|
||||
system-frequency = <0>; // from bootloader
|
||||
|
||||
cdm@200 {
|
||||
compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
|
||||
reg = <0x200 0x38>;
|
||||
};
|
||||
|
||||
mpc5200_pic: interrupt-controller@500 {
|
||||
// 5200 interrupts are encoded into two levels;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <3>;
|
||||
compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
|
||||
reg = <0x500 0x80>;
|
||||
};
|
||||
|
||||
timer@600 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x600 0x10>;
|
||||
interrupts = <1 9 0>;
|
||||
fsl,has-wdt;
|
||||
};
|
||||
|
||||
timer@610 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x610 0x10>;
|
||||
interrupts = <1 10 0>;
|
||||
can@900 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
timer@620 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x620 0x10>;
|
||||
interrupts = <1 11 0>;
|
||||
};
|
||||
|
||||
timer@630 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x630 0x10>;
|
||||
interrupts = <1 12 0>;
|
||||
};
|
||||
|
||||
timer@640 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x640 0x10>;
|
||||
interrupts = <1 13 0>;
|
||||
};
|
||||
|
||||
timer@650 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x650 0x10>;
|
||||
interrupts = <1 14 0>;
|
||||
};
|
||||
|
||||
timer@660 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x660 0x10>;
|
||||
interrupts = <1 15 0>;
|
||||
};
|
||||
|
||||
timer@670 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x670 0x10>;
|
||||
interrupts = <1 16 0>;
|
||||
};
|
||||
|
||||
rtc@800 { // Real time clock
|
||||
compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
|
||||
reg = <0x800 0x100>;
|
||||
interrupts = <1 5 0 1 6 0>;
|
||||
};
|
||||
|
||||
gpio_simple: gpio@b00 {
|
||||
compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
|
||||
reg = <0xb00 0x40>;
|
||||
interrupts = <1 7 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpio_wkup: gpio@c00 {
|
||||
compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
|
||||
reg = <0xc00 0x40>;
|
||||
interrupts = <1 8 0 0 3 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
spi@f00 {
|
||||
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
|
||||
reg = <0xf00 0x20>;
|
||||
interrupts = <2 13 0 2 14 0>;
|
||||
};
|
||||
|
||||
usb@1000 {
|
||||
compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
|
||||
reg = <0x1000 0xff>;
|
||||
interrupts = <2 6 0>;
|
||||
};
|
||||
|
||||
dma-controller@1200 {
|
||||
compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
|
||||
reg = <0x1200 0x80>;
|
||||
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
|
||||
3 4 0 3 5 0 3 6 0 3 7 0
|
||||
3 8 0 3 9 0 3 10 0 3 11 0
|
||||
3 12 0 3 13 0 3 14 0 3 15 0>;
|
||||
};
|
||||
|
||||
xlb@1f00 {
|
||||
compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
|
||||
reg = <0x1f00 0x100>;
|
||||
can@980 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
psc@2000 { // PSC1
|
||||
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
|
||||
reg = <0x2000 0x100>;
|
||||
interrupts = <2 1 0>;
|
||||
};
|
||||
|
||||
psc@2200 { // PSC2
|
||||
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
|
||||
reg = <0x2200 0x100>;
|
||||
interrupts = <2 2 0>;
|
||||
};
|
||||
|
||||
psc@2400 { // PSC3
|
||||
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
|
||||
reg = <0x2400 0x100>;
|
||||
interrupts = <2 3 0>;
|
||||
};
|
||||
|
||||
psc@2600 { // PSC4
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
psc@2800 { // PSC5
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
psc@2c00 { // PSC6
|
||||
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
|
||||
reg = <0x2c00 0x100>;
|
||||
interrupts = <2 4 0>;
|
||||
};
|
||||
|
||||
ethernet@3000 {
|
||||
compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
|
||||
reg = <0x3000 0x400>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <2 5 0>;
|
||||
phy-handle = <&phy0>;
|
||||
};
|
||||
|
||||
mdio@3000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
|
||||
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
|
||||
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@3d40 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
|
||||
reg = <0x3d40 0x40>;
|
||||
interrupts = <2 16 0>;
|
||||
ata@3a00 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sram@8000 {
|
||||
compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
|
||||
reg = <0x8000 0x4000>;
|
||||
i2c@3d00 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
pci@f0000d00 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
localbus {
|
||||
compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0 0xfc000000 0x2000000>;
|
||||
|
||||
// 16-bit flash device at LocalPlus Bus CS0
|
||||
flash@0,0 {
|
||||
compatible = "cfi-flash";
|
||||
reg = <0 0 0x2000000>;
|
||||
bank-width = <2>;
|
||||
device-width = <2>;
|
||||
#size-cells = <1>;
|
||||
#address-cells = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -11,195 +11,68 @@
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/include/ "mpc5200b.dtsi"
|
||||
|
||||
/ {
|
||||
model = "intercontrol,digsy-mtc";
|
||||
compatible = "intercontrol,digsy-mtc";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
interrupt-parent = <&mpc5200_pic>;
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,5200@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0>;
|
||||
d-cache-line-size = <32>;
|
||||
i-cache-line-size = <32>;
|
||||
d-cache-size = <0x4000>; // L1, 16K
|
||||
i-cache-size = <0x4000>; // L1, 16K
|
||||
timebase-frequency = <0>; // from bootloader
|
||||
bus-frequency = <0>; // from bootloader
|
||||
clock-frequency = <0>; // from bootloader
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x02000000>; // 32MB
|
||||
};
|
||||
|
||||
soc5200@f0000000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,mpc5200b-immr";
|
||||
ranges = <0 0xf0000000 0x0000c000>;
|
||||
reg = <0xf0000000 0x00000100>;
|
||||
bus-frequency = <0>; // from bootloader
|
||||
system-frequency = <0>; // from bootloader
|
||||
|
||||
cdm@200 {
|
||||
compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
|
||||
reg = <0x200 0x38>;
|
||||
};
|
||||
|
||||
mpc5200_pic: interrupt-controller@500 {
|
||||
// 5200 interrupts are encoded into two levels;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <3>;
|
||||
compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
|
||||
reg = <0x500 0x80>;
|
||||
};
|
||||
|
||||
timer@600 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x600 0x10>;
|
||||
interrupts = <1 9 0>;
|
||||
fsl,has-wdt;
|
||||
};
|
||||
|
||||
timer@610 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x610 0x10>;
|
||||
interrupts = <1 10 0>;
|
||||
rtc@800 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
timer@620 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x620 0x10>;
|
||||
interrupts = <1 11 0>;
|
||||
can@900 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
timer@630 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x630 0x10>;
|
||||
interrupts = <1 12 0>;
|
||||
can@980 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
timer@640 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x640 0x10>;
|
||||
interrupts = <1 13 0>;
|
||||
psc@2000 { // PSC1
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
timer@650 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x650 0x10>;
|
||||
interrupts = <1 14 0>;
|
||||
psc@2200 { // PSC2
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
timer@660 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x660 0x10>;
|
||||
interrupts = <1 15 0>;
|
||||
};
|
||||
|
||||
timer@670 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x670 0x10>;
|
||||
interrupts = <1 16 0>;
|
||||
};
|
||||
|
||||
gpio_simple: gpio@b00 {
|
||||
compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
|
||||
reg = <0xb00 0x40>;
|
||||
interrupts = <1 7 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpio_wkup: gpio@c00 {
|
||||
compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
|
||||
reg = <0xc00 0x40>;
|
||||
interrupts = <1 8 0 0 3 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
spi@f00 {
|
||||
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
|
||||
reg = <0xf00 0x20>;
|
||||
interrupts = <2 13 0 2 14 0>;
|
||||
};
|
||||
|
||||
usb@1000 {
|
||||
compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
|
||||
reg = <0x1000 0xff>;
|
||||
interrupts = <2 6 0>;
|
||||
};
|
||||
|
||||
dma-controller@1200 {
|
||||
compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
|
||||
reg = <0x1200 0x80>;
|
||||
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
|
||||
3 4 0 3 5 0 3 6 0 3 7 0
|
||||
3 8 0 3 9 0 3 10 0 3 11 0
|
||||
3 12 0 3 13 0 3 14 0 3 15 0>;
|
||||
};
|
||||
|
||||
xlb@1f00 {
|
||||
compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
|
||||
reg = <0x1f00 0x100>;
|
||||
psc@2400 { // PSC3
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
psc@2600 { // PSC4
|
||||
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
|
||||
reg = <0x2600 0x100>;
|
||||
interrupts = <2 11 0>;
|
||||
};
|
||||
|
||||
psc@2800 { // PSC5
|
||||
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
|
||||
reg = <0x2800 0x100>;
|
||||
interrupts = <2 12 0>;
|
||||
};
|
||||
|
||||
psc@2c00 { // PSC6
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ethernet@3000 {
|
||||
compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
|
||||
reg = <0x3000 0x400>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <2 5 0>;
|
||||
phy-handle = <&phy0>;
|
||||
};
|
||||
|
||||
mdio@3000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
|
||||
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
|
||||
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
ata@3a00 {
|
||||
compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
|
||||
reg = <0x3a00 0x100>;
|
||||
interrupts = <2 7 0>;
|
||||
};
|
||||
|
||||
i2c@3d00 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
|
||||
reg = <0x3d00 0x40>;
|
||||
interrupts = <2 15 0>;
|
||||
|
||||
rtc@50 {
|
||||
compatible = "at,24c08";
|
||||
reg = <0x50>;
|
||||
@ -211,16 +84,16 @@
|
||||
};
|
||||
};
|
||||
|
||||
sram@8000 {
|
||||
compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
|
||||
reg = <0x8000 0x4000>;
|
||||
i2c@3d40 {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
pci@f0000d00 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
localbus {
|
||||
compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0 0xff000000 0x1000000>;
|
||||
|
||||
// 16-bit flash device at LocalPlus Bus CS0
|
||||
|
||||
@ -10,253 +10,75 @@
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/include/ "mpc5200b.dtsi"
|
||||
|
||||
/ {
|
||||
model = "fsl,lite5200b";
|
||||
compatible = "fsl,lite5200b";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
interrupt-parent = <&mpc5200_pic>;
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,5200@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0>;
|
||||
d-cache-line-size = <32>;
|
||||
i-cache-line-size = <32>;
|
||||
d-cache-size = <0x4000>; // L1, 16K
|
||||
i-cache-size = <0x4000>; // L1, 16K
|
||||
timebase-frequency = <0>; // from bootloader
|
||||
bus-frequency = <0>; // from bootloader
|
||||
clock-frequency = <0>; // from bootloader
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x10000000>; // 256MB
|
||||
};
|
||||
|
||||
soc5200@f0000000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,mpc5200b-immr";
|
||||
ranges = <0 0xf0000000 0x0000c000>;
|
||||
reg = <0xf0000000 0x00000100>;
|
||||
bus-frequency = <0>; // from bootloader
|
||||
system-frequency = <0>; // from bootloader
|
||||
|
||||
cdm@200 {
|
||||
compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
|
||||
reg = <0x200 0x38>;
|
||||
};
|
||||
|
||||
mpc5200_pic: interrupt-controller@500 {
|
||||
// 5200 interrupts are encoded into two levels;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <3>;
|
||||
compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
|
||||
reg = <0x500 0x80>;
|
||||
};
|
||||
|
||||
timer@600 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x600 0x10>;
|
||||
interrupts = <1 9 0>;
|
||||
fsl,has-wdt;
|
||||
};
|
||||
|
||||
timer@610 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x610 0x10>;
|
||||
interrupts = <1 10 0>;
|
||||
};
|
||||
|
||||
timer@620 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x620 0x10>;
|
||||
interrupts = <1 11 0>;
|
||||
};
|
||||
|
||||
timer@630 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x630 0x10>;
|
||||
interrupts = <1 12 0>;
|
||||
};
|
||||
|
||||
timer@640 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x640 0x10>;
|
||||
interrupts = <1 13 0>;
|
||||
};
|
||||
|
||||
timer@650 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x650 0x10>;
|
||||
interrupts = <1 14 0>;
|
||||
};
|
||||
|
||||
timer@660 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x660 0x10>;
|
||||
interrupts = <1 15 0>;
|
||||
};
|
||||
|
||||
timer@670 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x670 0x10>;
|
||||
interrupts = <1 16 0>;
|
||||
};
|
||||
|
||||
rtc@800 { // Real time clock
|
||||
compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
|
||||
reg = <0x800 0x100>;
|
||||
interrupts = <1 5 0 1 6 0>;
|
||||
};
|
||||
|
||||
can@900 {
|
||||
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
|
||||
interrupts = <2 17 0>;
|
||||
reg = <0x900 0x80>;
|
||||
};
|
||||
|
||||
can@980 {
|
||||
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
|
||||
interrupts = <2 18 0>;
|
||||
reg = <0x980 0x80>;
|
||||
};
|
||||
|
||||
gpio_simple: gpio@b00 {
|
||||
compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
|
||||
reg = <0xb00 0x40>;
|
||||
interrupts = <1 7 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpio_wkup: gpio@c00 {
|
||||
compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
|
||||
reg = <0xc00 0x40>;
|
||||
interrupts = <1 8 0 0 3 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
spi@f00 {
|
||||
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
|
||||
reg = <0xf00 0x20>;
|
||||
interrupts = <2 13 0 2 14 0>;
|
||||
};
|
||||
|
||||
usb@1000 {
|
||||
compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
|
||||
reg = <0x1000 0xff>;
|
||||
interrupts = <2 6 0>;
|
||||
};
|
||||
|
||||
dma-controller@1200 {
|
||||
compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
|
||||
reg = <0x1200 0x80>;
|
||||
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
|
||||
3 4 0 3 5 0 3 6 0 3 7 0
|
||||
3 8 0 3 9 0 3 10 0 3 11 0
|
||||
3 12 0 3 13 0 3 14 0 3 15 0>;
|
||||
};
|
||||
|
||||
xlb@1f00 {
|
||||
compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
|
||||
reg = <0x1f00 0x100>;
|
||||
};
|
||||
|
||||
psc@2000 { // PSC1
|
||||
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
|
||||
reg = <0x2000 0x100>;
|
||||
interrupts = <2 1 0>;
|
||||
cell-index = <0>;
|
||||
};
|
||||
|
||||
psc@2200 { // PSC2
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
psc@2400 { // PSC3
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
psc@2600 { // PSC4
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
psc@2800 { // PSC5
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
psc@2c00 { // PSC6
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
// PSC2 in ac97 mode example
|
||||
//ac97@2200 { // PSC2
|
||||
// compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
|
||||
// cell-index = <1>;
|
||||
// reg = <0x2200 0x100>;
|
||||
// interrupts = <2 2 0>;
|
||||
//};
|
||||
|
||||
// PSC3 in CODEC mode example
|
||||
//i2s@2400 { // PSC3
|
||||
// compatible = "fsl,mpc5200b-psc-i2s"; //not 5200 compatible
|
||||
// cell-index = <2>;
|
||||
// reg = <0x2400 0x100>;
|
||||
// interrupts = <2 3 0>;
|
||||
//};
|
||||
|
||||
// PSC4 in uart mode example
|
||||
//serial@2600 { // PSC4
|
||||
// compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
|
||||
// reg = <0x2600 0x100>;
|
||||
// interrupts = <2 11 0>;
|
||||
//};
|
||||
|
||||
// PSC5 in uart mode example
|
||||
//serial@2800 { // PSC5
|
||||
// compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
|
||||
// reg = <0x2800 0x100>;
|
||||
// interrupts = <2 12 0>;
|
||||
//};
|
||||
|
||||
// PSC6 in spi mode example
|
||||
//spi@2c00 { // PSC6
|
||||
// compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
|
||||
// cell-index = <5>;
|
||||
// reg = <0x2c00 0x100>;
|
||||
// interrupts = <2 4 0>;
|
||||
//};
|
||||
|
||||
ethernet@3000 {
|
||||
compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
|
||||
reg = <0x3000 0x400>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <2 5 0>;
|
||||
phy-handle = <&phy0>;
|
||||
};
|
||||
|
||||
mdio@3000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
|
||||
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
|
||||
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
ata@3a00 {
|
||||
compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
|
||||
reg = <0x3a00 0x100>;
|
||||
interrupts = <2 7 0>;
|
||||
};
|
||||
|
||||
i2c@3d00 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
|
||||
reg = <0x3d00 0x40>;
|
||||
interrupts = <2 15 0>;
|
||||
};
|
||||
|
||||
i2c@3d40 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
|
||||
reg = <0x3d40 0x40>;
|
||||
interrupts = <2 16 0>;
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c02";
|
||||
reg = <0x50>;
|
||||
@ -270,12 +92,6 @@
|
||||
};
|
||||
|
||||
pci@f0000d00 {
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
|
||||
reg = <0xf0000d00 0x100>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
|
||||
0xc000 0 0 2 &mpc5200_pic 1 1 3
|
||||
@ -295,11 +111,6 @@
|
||||
};
|
||||
|
||||
localbus {
|
||||
compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
|
||||
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
|
||||
ranges = <0 0 0xfe000000 0x02000000>;
|
||||
|
||||
flash@0,0 {
|
||||
|
||||
@ -11,14 +11,11 @@
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/include/ "mpc5200b.dtsi"
|
||||
|
||||
/ {
|
||||
model = "fsl,media5200";
|
||||
compatible = "fsl,media5200";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
interrupt-parent = <&mpc5200_pic>;
|
||||
|
||||
aliases {
|
||||
console = &console;
|
||||
@ -30,16 +27,7 @@
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,5200@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0>;
|
||||
d-cache-line-size = <32>;
|
||||
i-cache-line-size = <32>;
|
||||
d-cache-size = <0x4000>; // L1, 16K
|
||||
i-cache-size = <0x4000>; // L1, 16K
|
||||
timebase-frequency = <33000000>; // 33 MHz, these were configured by U-Boot
|
||||
bus-frequency = <132000000>; // 132 MHz
|
||||
clock-frequency = <396000000>; // 396 MHz
|
||||
@ -47,203 +35,57 @@
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x08000000>; // 128MB RAM
|
||||
};
|
||||
|
||||
soc@f0000000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,mpc5200b-immr";
|
||||
ranges = <0 0xf0000000 0x0000c000>;
|
||||
reg = <0xf0000000 0x00000100>;
|
||||
soc5200@f0000000 {
|
||||
bus-frequency = <132000000>;// 132 MHz
|
||||
system-frequency = <0>; // from bootloader
|
||||
|
||||
cdm@200 {
|
||||
compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
|
||||
reg = <0x200 0x38>;
|
||||
};
|
||||
|
||||
mpc5200_pic: interrupt-controller@500 {
|
||||
// 5200 interrupts are encoded into two levels;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <3>;
|
||||
compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
|
||||
reg = <0x500 0x80>;
|
||||
};
|
||||
|
||||
timer@600 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x600 0x10>;
|
||||
interrupts = <1 9 0>;
|
||||
fsl,has-wdt;
|
||||
};
|
||||
|
||||
timer@610 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x610 0x10>;
|
||||
interrupts = <1 10 0>;
|
||||
psc@2000 { // PSC1
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
timer@620 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x620 0x10>;
|
||||
interrupts = <1 11 0>;
|
||||
psc@2200 { // PSC2
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
timer@630 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x630 0x10>;
|
||||
interrupts = <1 12 0>;
|
||||
psc@2400 { // PSC3
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
timer@640 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x640 0x10>;
|
||||
interrupts = <1 13 0>;
|
||||
psc@2600 { // PSC4
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
timer@650 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x650 0x10>;
|
||||
interrupts = <1 14 0>;
|
||||
};
|
||||
|
||||
timer@660 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x660 0x10>;
|
||||
interrupts = <1 15 0>;
|
||||
};
|
||||
|
||||
timer@670 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x670 0x10>;
|
||||
interrupts = <1 16 0>;
|
||||
};
|
||||
|
||||
rtc@800 { // Real time clock
|
||||
compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
|
||||
reg = <0x800 0x100>;
|
||||
interrupts = <1 5 0 1 6 0>;
|
||||
};
|
||||
|
||||
can@900 {
|
||||
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
|
||||
interrupts = <2 17 0>;
|
||||
reg = <0x900 0x80>;
|
||||
};
|
||||
|
||||
can@980 {
|
||||
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
|
||||
interrupts = <2 18 0>;
|
||||
reg = <0x980 0x80>;
|
||||
};
|
||||
|
||||
gpio_simple: gpio@b00 {
|
||||
compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
|
||||
reg = <0xb00 0x40>;
|
||||
interrupts = <1 7 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpio_wkup: gpio@c00 {
|
||||
compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
|
||||
reg = <0xc00 0x40>;
|
||||
interrupts = <1 8 0 0 3 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
spi@f00 {
|
||||
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
|
||||
reg = <0xf00 0x20>;
|
||||
interrupts = <2 13 0 2 14 0>;
|
||||
};
|
||||
|
||||
usb@1000 {
|
||||
compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
|
||||
reg = <0x1000 0x100>;
|
||||
interrupts = <2 6 0>;
|
||||
};
|
||||
|
||||
dma-controller@1200 {
|
||||
compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
|
||||
reg = <0x1200 0x80>;
|
||||
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
|
||||
3 4 0 3 5 0 3 6 0 3 7 0
|
||||
3 8 0 3 9 0 3 10 0 3 11 0
|
||||
3 12 0 3 13 0 3 14 0 3 15 0>;
|
||||
};
|
||||
|
||||
xlb@1f00 {
|
||||
compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
|
||||
reg = <0x1f00 0x100>;
|
||||
psc@2800 { // PSC5
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
// PSC6 in uart mode
|
||||
console: psc@2c00 { // PSC6
|
||||
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
|
||||
reg = <0x2c00 0x100>;
|
||||
interrupts = <2 4 0>;
|
||||
};
|
||||
|
||||
eth0: ethernet@3000 {
|
||||
compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
|
||||
reg = <0x3000 0x400>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <2 5 0>;
|
||||
ethernet@3000 {
|
||||
phy-handle = <&phy0>;
|
||||
};
|
||||
|
||||
mdio@3000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
|
||||
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
|
||||
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
ata@3a00 {
|
||||
compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
|
||||
reg = <0x3a00 0x100>;
|
||||
interrupts = <2 7 0>;
|
||||
};
|
||||
|
||||
i2c@3d00 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
|
||||
reg = <0x3d00 0x40>;
|
||||
interrupts = <2 15 0>;
|
||||
};
|
||||
|
||||
i2c@3d40 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
|
||||
reg = <0x3d40 0x40>;
|
||||
interrupts = <2 16 0>;
|
||||
};
|
||||
|
||||
sram@8000 {
|
||||
compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
|
||||
reg = <0x8000 0x4000>;
|
||||
usb@1000 {
|
||||
reg = <0x1000 0x100>;
|
||||
};
|
||||
};
|
||||
|
||||
pci@f0000d00 {
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
|
||||
reg = <0xf0000d00 0x100>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <0xc000 0 0 1 &media5200_fpga 0 2 // 1st slot
|
||||
0xc000 0 0 2 &media5200_fpga 0 3
|
||||
@ -260,37 +102,29 @@
|
||||
|
||||
0xe000 0 0 1 &media5200_fpga 0 5 // CoralIP
|
||||
>;
|
||||
clock-frequency = <0>; // From boot loader
|
||||
interrupts = <2 8 0 2 9 0 2 10 0>;
|
||||
interrupt-parent = <&mpc5200_pic>;
|
||||
bus-range = <0 0>;
|
||||
ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
|
||||
0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
|
||||
0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
|
||||
interrupt-parent = <&mpc5200_pic>;
|
||||
};
|
||||
|
||||
localbus {
|
||||
compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
|
||||
ranges = < 0 0 0xfc000000 0x02000000
|
||||
1 0 0xfe000000 0x02000000
|
||||
2 0 0xf0010000 0x00010000
|
||||
3 0 0xf0020000 0x00010000 >;
|
||||
|
||||
flash@0,0 {
|
||||
compatible = "amd,am29lv28ml", "cfi-flash";
|
||||
reg = <0 0x0 0x2000000>; // 32 MB
|
||||
bank-width = <4>; // Width in bytes of the flash bank
|
||||
device-width = <2>; // Two devices on each bank
|
||||
reg = <0 0x0 0x2000000>; // 32 MB
|
||||
bank-width = <4>; // Width in bytes of the flash bank
|
||||
device-width = <2>; // Two devices on each bank
|
||||
};
|
||||
|
||||
flash@1,0 {
|
||||
compatible = "amd,am29lv28ml", "cfi-flash";
|
||||
reg = <1 0 0x2000000>; // 32 MB
|
||||
bank-width = <4>; // Width in bytes of the flash bank
|
||||
device-width = <2>; // Two devices on each bank
|
||||
reg = <1 0 0x2000000>; // 32 MB
|
||||
bank-width = <4>; // Width in bytes of the flash bank
|
||||
device-width = <2>; // Two devices on each bank
|
||||
};
|
||||
|
||||
media5200_fpga: fpga@2,0 {
|
||||
|
||||
@ -10,219 +10,73 @@
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/include/ "mpc5200b.dtsi"
|
||||
|
||||
/ {
|
||||
model = "promess,motionpro";
|
||||
compatible = "promess,motionpro";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
interrupt-parent = <&mpc5200_pic>;
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,5200@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0>;
|
||||
d-cache-line-size = <32>;
|
||||
i-cache-line-size = <32>;
|
||||
d-cache-size = <0x4000>; // L1, 16K
|
||||
i-cache-size = <0x4000>; // L1, 16K
|
||||
timebase-frequency = <0>; // from bootloader
|
||||
bus-frequency = <0>; // from bootloader
|
||||
clock-frequency = <0>; // from bootloader
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x04000000>; // 64MB
|
||||
};
|
||||
|
||||
soc5200@f0000000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,mpc5200b-immr";
|
||||
ranges = <0 0xf0000000 0x0000c000>;
|
||||
reg = <0xf0000000 0x00000100>;
|
||||
bus-frequency = <0>; // from bootloader
|
||||
system-frequency = <0>; // from bootloader
|
||||
|
||||
cdm@200 {
|
||||
compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
|
||||
reg = <0x200 0x38>;
|
||||
};
|
||||
|
||||
mpc5200_pic: interrupt-controller@500 {
|
||||
// 5200 interrupts are encoded into two levels;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <3>;
|
||||
compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
|
||||
reg = <0x500 0x80>;
|
||||
};
|
||||
|
||||
timer@600 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x600 0x10>;
|
||||
interrupts = <1 9 0>;
|
||||
fsl,has-wdt;
|
||||
};
|
||||
|
||||
timer@610 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x610 0x10>;
|
||||
interrupts = <1 10 0>;
|
||||
};
|
||||
|
||||
timer@620 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x620 0x10>;
|
||||
interrupts = <1 11 0>;
|
||||
};
|
||||
|
||||
timer@630 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x630 0x10>;
|
||||
interrupts = <1 12 0>;
|
||||
};
|
||||
|
||||
timer@640 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x640 0x10>;
|
||||
interrupts = <1 13 0>;
|
||||
};
|
||||
|
||||
timer@650 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x650 0x10>;
|
||||
interrupts = <1 14 0>;
|
||||
};
|
||||
|
||||
timer@660 { // Motion-PRO status LED
|
||||
compatible = "promess,motionpro-led";
|
||||
label = "motionpro-statusled";
|
||||
reg = <0x660 0x10>;
|
||||
interrupts = <1 15 0>;
|
||||
blink-delay = <100>; // 100 msec
|
||||
};
|
||||
|
||||
timer@670 { // Motion-PRO ready LED
|
||||
compatible = "promess,motionpro-led";
|
||||
label = "motionpro-readyled";
|
||||
reg = <0x670 0x10>;
|
||||
interrupts = <1 16 0>;
|
||||
};
|
||||
|
||||
rtc@800 { // Real time clock
|
||||
compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
|
||||
reg = <0x800 0x100>;
|
||||
interrupts = <1 5 0 1 6 0>;
|
||||
};
|
||||
|
||||
can@980 {
|
||||
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
|
||||
interrupts = <2 18 0>;
|
||||
reg = <0x980 0x80>;
|
||||
};
|
||||
|
||||
gpio_simple: gpio@b00 {
|
||||
compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
|
||||
reg = <0xb00 0x40>;
|
||||
interrupts = <1 7 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpio_wkup: gpio@c00 {
|
||||
compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
|
||||
reg = <0xc00 0x40>;
|
||||
interrupts = <1 8 0 0 3 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
spi@f00 {
|
||||
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
|
||||
reg = <0xf00 0x20>;
|
||||
interrupts = <2 13 0 2 14 0>;
|
||||
};
|
||||
|
||||
usb@1000 {
|
||||
compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
|
||||
reg = <0x1000 0xff>;
|
||||
interrupts = <2 6 0>;
|
||||
};
|
||||
|
||||
dma-controller@1200 {
|
||||
compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
|
||||
reg = <0x1200 0x80>;
|
||||
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
|
||||
3 4 0 3 5 0 3 6 0 3 7 0
|
||||
3 8 0 3 9 0 3 10 0 3 11 0
|
||||
3 12 0 3 13 0 3 14 0 3 15 0>;
|
||||
};
|
||||
|
||||
xlb@1f00 {
|
||||
compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
|
||||
reg = <0x1f00 0x100>;
|
||||
can@900 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
psc@2000 { // PSC1
|
||||
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
|
||||
reg = <0x2000 0x100>;
|
||||
interrupts = <2 1 0>;
|
||||
};
|
||||
|
||||
// PSC2 in spi master mode
|
||||
psc@2200 { // PSC2
|
||||
compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
|
||||
cell-index = <1>;
|
||||
reg = <0x2200 0x100>;
|
||||
interrupts = <2 2 0>;
|
||||
};
|
||||
|
||||
// PSC5 in uart mode
|
||||
psc@2400 { // PSC3
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
psc@2600 { // PSC4
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
psc@2800 { // PSC5
|
||||
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
|
||||
reg = <0x2800 0x100>;
|
||||
interrupts = <2 12 0>;
|
||||
};
|
||||
|
||||
psc@2c00 { // PSC6
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ethernet@3000 {
|
||||
compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
|
||||
reg = <0x3000 0x400>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <2 5 0>;
|
||||
phy-handle = <&phy0>;
|
||||
};
|
||||
|
||||
mdio@3000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
|
||||
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
|
||||
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
|
||||
|
||||
phy0: ethernet-phy@2 {
|
||||
reg = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
ata@3a00 {
|
||||
compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
|
||||
reg = <0x3a00 0x100>;
|
||||
interrupts = <2 7 0>;
|
||||
i2c@3d00 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@3d40 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
|
||||
reg = <0x3d40 0x40>;
|
||||
interrupts = <2 16 0>;
|
||||
|
||||
rtc@68 {
|
||||
compatible = "dallas,ds1339";
|
||||
reg = <0x68>;
|
||||
@ -235,10 +89,11 @@
|
||||
};
|
||||
};
|
||||
|
||||
pci@f0000d00 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
localbus {
|
||||
compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0 0xff000000 0x01000000
|
||||
1 0 0x50000000 0x00010000
|
||||
2 0 0x50010000 0x00010000
|
||||
@ -277,6 +132,9 @@
|
||||
reg = <0 0 0x01000000>;
|
||||
bank-width = <2>;
|
||||
device-width = <2>;
|
||||
#size-cells = <1>;
|
||||
#address-cells = <1>;
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
|
||||
275
arch/powerpc/boot/dts/mpc5200b.dtsi
Normal file
275
arch/powerpc/boot/dts/mpc5200b.dtsi
Normal file
@ -0,0 +1,275 @@
|
||||
/*
|
||||
* base MPC5200b Device Tree Source
|
||||
*
|
||||
* Copyright (C) 2010 SecretLab
|
||||
* Grant Likely <grant@secretlab.ca>
|
||||
* John Bonesio <bones@secretlab.ca>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/ {
|
||||
model = "fsl,mpc5200b";
|
||||
compatible = "fsl,mpc5200b";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
interrupt-parent = <&mpc5200_pic>;
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
powerpc: PowerPC,5200@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0>;
|
||||
d-cache-line-size = <32>;
|
||||
i-cache-line-size = <32>;
|
||||
d-cache-size = <0x4000>; // L1, 16K
|
||||
i-cache-size = <0x4000>; // L1, 16K
|
||||
timebase-frequency = <0>; // from bootloader
|
||||
bus-frequency = <0>; // from bootloader
|
||||
clock-frequency = <0>; // from bootloader
|
||||
};
|
||||
};
|
||||
|
||||
memory: memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x04000000>; // 64MB
|
||||
};
|
||||
|
||||
soc: soc5200@f0000000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,mpc5200b-immr";
|
||||
ranges = <0 0xf0000000 0x0000c000>;
|
||||
reg = <0xf0000000 0x00000100>;
|
||||
bus-frequency = <0>; // from bootloader
|
||||
system-frequency = <0>; // from bootloader
|
||||
|
||||
cdm@200 {
|
||||
compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
|
||||
reg = <0x200 0x38>;
|
||||
};
|
||||
|
||||
mpc5200_pic: interrupt-controller@500 {
|
||||
// 5200 interrupts are encoded into two levels;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <3>;
|
||||
compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
|
||||
reg = <0x500 0x80>;
|
||||
};
|
||||
|
||||
timer@600 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x600 0x10>;
|
||||
interrupts = <1 9 0>;
|
||||
};
|
||||
|
||||
timer@610 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x610 0x10>;
|
||||
interrupts = <1 10 0>;
|
||||
};
|
||||
|
||||
timer@620 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x620 0x10>;
|
||||
interrupts = <1 11 0>;
|
||||
};
|
||||
|
||||
timer@630 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x630 0x10>;
|
||||
interrupts = <1 12 0>;
|
||||
};
|
||||
|
||||
timer@640 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x640 0x10>;
|
||||
interrupts = <1 13 0>;
|
||||
};
|
||||
|
||||
timer@650 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x650 0x10>;
|
||||
interrupts = <1 14 0>;
|
||||
};
|
||||
|
||||
timer@660 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x660 0x10>;
|
||||
interrupts = <1 15 0>;
|
||||
};
|
||||
|
||||
timer@670 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x670 0x10>;
|
||||
interrupts = <1 16 0>;
|
||||
};
|
||||
|
||||
rtc@800 { // Real time clock
|
||||
compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
|
||||
reg = <0x800 0x100>;
|
||||
interrupts = <1 5 0 1 6 0>;
|
||||
};
|
||||
|
||||
can@900 {
|
||||
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
|
||||
interrupts = <2 17 0>;
|
||||
reg = <0x900 0x80>;
|
||||
};
|
||||
|
||||
can@980 {
|
||||
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
|
||||
interrupts = <2 18 0>;
|
||||
reg = <0x980 0x80>;
|
||||
};
|
||||
|
||||
gpio_simple: gpio@b00 {
|
||||
compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
|
||||
reg = <0xb00 0x40>;
|
||||
interrupts = <1 7 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpio_wkup: gpio@c00 {
|
||||
compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
|
||||
reg = <0xc00 0x40>;
|
||||
interrupts = <1 8 0 0 3 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
spi@f00 {
|
||||
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
|
||||
reg = <0xf00 0x20>;
|
||||
interrupts = <2 13 0 2 14 0>;
|
||||
};
|
||||
|
||||
usb: usb@1000 {
|
||||
compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
|
||||
reg = <0x1000 0xff>;
|
||||
interrupts = <2 6 0>;
|
||||
};
|
||||
|
||||
dma-controller@1200 {
|
||||
compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
|
||||
reg = <0x1200 0x80>;
|
||||
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
|
||||
3 4 0 3 5 0 3 6 0 3 7 0
|
||||
3 8 0 3 9 0 3 10 0 3 11 0
|
||||
3 12 0 3 13 0 3 14 0 3 15 0>;
|
||||
};
|
||||
|
||||
xlb@1f00 {
|
||||
compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
|
||||
reg = <0x1f00 0x100>;
|
||||
};
|
||||
|
||||
psc1: psc@2000 { // PSC1
|
||||
compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
|
||||
reg = <0x2000 0x100>;
|
||||
interrupts = <2 1 0>;
|
||||
};
|
||||
|
||||
psc2: psc@2200 { // PSC2
|
||||
compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
|
||||
reg = <0x2200 0x100>;
|
||||
interrupts = <2 2 0>;
|
||||
};
|
||||
|
||||
psc3: psc@2400 { // PSC3
|
||||
compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
|
||||
reg = <0x2400 0x100>;
|
||||
interrupts = <2 3 0>;
|
||||
};
|
||||
|
||||
psc4: psc@2600 { // PSC4
|
||||
compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
|
||||
reg = <0x2600 0x100>;
|
||||
interrupts = <2 11 0>;
|
||||
};
|
||||
|
||||
psc5: psc@2800 { // PSC5
|
||||
compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
|
||||
reg = <0x2800 0x100>;
|
||||
interrupts = <2 12 0>;
|
||||
};
|
||||
|
||||
psc6: psc@2c00 { // PSC6
|
||||
compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
|
||||
reg = <0x2c00 0x100>;
|
||||
interrupts = <2 4 0>;
|
||||
};
|
||||
|
||||
eth0: ethernet@3000 {
|
||||
compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
|
||||
reg = <0x3000 0x400>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <2 5 0>;
|
||||
};
|
||||
|
||||
mdio@3000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
|
||||
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
|
||||
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
|
||||
};
|
||||
|
||||
ata@3a00 {
|
||||
compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
|
||||
reg = <0x3a00 0x100>;
|
||||
interrupts = <2 7 0>;
|
||||
};
|
||||
|
||||
i2c@3d00 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
|
||||
reg = <0x3d00 0x40>;
|
||||
interrupts = <2 15 0>;
|
||||
};
|
||||
|
||||
i2c@3d40 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
|
||||
reg = <0x3d40 0x40>;
|
||||
interrupts = <2 16 0>;
|
||||
};
|
||||
|
||||
sram@8000 {
|
||||
compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
|
||||
reg = <0x8000 0x4000>;
|
||||
};
|
||||
};
|
||||
|
||||
pci: pci@f0000d00 {
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
|
||||
reg = <0xf0000d00 0x100>;
|
||||
// interrupt-map-mask = need to add
|
||||
// interrupt-map = need to add
|
||||
clock-frequency = <0>; // From boot loader
|
||||
interrupts = <2 8 0 2 9 0 2 10 0>;
|
||||
bus-range = <0 0>;
|
||||
// ranges = need to add
|
||||
};
|
||||
|
||||
localbus: localbus {
|
||||
compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0 0xfc000000 0x2000000>;
|
||||
};
|
||||
};
|
||||
@ -11,172 +11,109 @@
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/include/ "mpc5200b.dtsi"
|
||||
|
||||
/ {
|
||||
model = "manroland,mucmc52";
|
||||
compatible = "manroland,mucmc52";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
interrupt-parent = <&mpc5200_pic>;
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,5200@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0>;
|
||||
d-cache-line-size = <32>;
|
||||
i-cache-line-size = <32>;
|
||||
d-cache-size = <0x4000>; // L1, 16K
|
||||
i-cache-size = <0x4000>; // L1, 16K
|
||||
timebase-frequency = <0>; // from bootloader
|
||||
bus-frequency = <0>; // from bootloader
|
||||
clock-frequency = <0>; // from bootloader
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x04000000>; // 64MB
|
||||
};
|
||||
|
||||
soc5200@f0000000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,mpc5200b-immr";
|
||||
ranges = <0 0xf0000000 0x0000c000>;
|
||||
reg = <0xf0000000 0x00000100>;
|
||||
bus-frequency = <0>; // from bootloader
|
||||
system-frequency = <0>; // from bootloader
|
||||
|
||||
cdm@200 {
|
||||
compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
|
||||
reg = <0x200 0x38>;
|
||||
};
|
||||
|
||||
mpc5200_pic: interrupt-controller@500 {
|
||||
// 5200 interrupts are encoded into two levels;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <3>;
|
||||
compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
|
||||
reg = <0x500 0x80>;
|
||||
};
|
||||
|
||||
gpt0: timer@600 { // GPT 0 in GPIO mode
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x600 0x10>;
|
||||
interrupts = <1 9 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpt1: timer@610 { // General Purpose Timer in GPIO mode
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x610 0x10>;
|
||||
interrupts = <1 10 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpt2: timer@620 { // General Purpose Timer in GPIO mode
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x620 0x10>;
|
||||
interrupts = <1 11 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpt3: timer@630 { // General Purpose Timer in GPIO mode
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x630 0x10>;
|
||||
interrupts = <1 12 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpio_simple: gpio@b00 {
|
||||
compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
|
||||
reg = <0xb00 0x40>;
|
||||
interrupts = <1 7 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
timer@640 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpio_wkup: gpio@c00 {
|
||||
compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
|
||||
reg = <0xc00 0x40>;
|
||||
interrupts = <1 8 0 0 3 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
timer@650 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
dma-controller@1200 {
|
||||
compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
|
||||
reg = <0x1200 0x80>;
|
||||
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
|
||||
3 4 0 3 5 0 3 6 0 3 7 0
|
||||
3 8 0 3 9 0 3 10 0 3 11 0
|
||||
3 12 0 3 13 0 3 14 0 3 15 0>;
|
||||
timer@660 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
xlb@1f00 {
|
||||
compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
|
||||
reg = <0x1f00 0x100>;
|
||||
timer@670 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
psc@2000 { /* PSC1 in UART mode */
|
||||
rtc@800 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
can@900 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
can@980 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi@f00 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb@1000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
psc@2000 { // PSC1
|
||||
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
|
||||
reg = <0x2000 0x100>;
|
||||
interrupts = <2 1 0>;
|
||||
};
|
||||
|
||||
psc@2200 { /* PSC2 in UART mode */
|
||||
psc@2200 { // PSC2
|
||||
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
|
||||
reg = <0x2200 0x100>;
|
||||
interrupts = <2 2 0>;
|
||||
};
|
||||
|
||||
psc@2c00 { /* PSC6 in UART mode */
|
||||
psc@2400 { // PSC3
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
psc@2600 { // PSC4
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
psc@2800 { // PSC5
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
psc@2c00 { // PSC6
|
||||
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
|
||||
reg = <0x2c00 0x100>;
|
||||
interrupts = <2 4 0>;
|
||||
};
|
||||
|
||||
ethernet@3000 {
|
||||
compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
|
||||
reg = <0x3000 0x400>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <2 5 0>;
|
||||
phy-handle = <&phy0>;
|
||||
};
|
||||
|
||||
mdio@3000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
|
||||
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
|
||||
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
compatible = "intel,lxt971";
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
ata@3a00 {
|
||||
compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
|
||||
reg = <0x3a00 0x100>;
|
||||
interrupts = <2 7 0>;
|
||||
i2c@3d00 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@3d40 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
|
||||
reg = <0x3d40 0x40>;
|
||||
interrupts = <2 16 0>;
|
||||
hwmon@2c {
|
||||
compatible = "ad,adm9240";
|
||||
reg = <0x2c>;
|
||||
@ -186,20 +123,9 @@
|
||||
reg = <0x51>;
|
||||
};
|
||||
};
|
||||
|
||||
sram@8000 {
|
||||
compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
|
||||
reg = <0x8000 0x4000>;
|
||||
};
|
||||
};
|
||||
|
||||
pci@f0000d00 {
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
|
||||
reg = <0xf0000d00 0x100>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x10 */
|
||||
@ -208,20 +134,12 @@
|
||||
0x8000 0 0 3 &mpc5200_pic 0 2 3
|
||||
0x8000 0 0 4 &mpc5200_pic 0 1 3
|
||||
>;
|
||||
clock-frequency = <0>; // From boot loader
|
||||
interrupts = <2 8 0 2 9 0 2 10 0>;
|
||||
bus-range = <0 0>;
|
||||
ranges = <0x42000000 0 0x60000000 0x60000000 0 0x10000000
|
||||
0x02000000 0 0x90000000 0x90000000 0 0x10000000
|
||||
0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
|
||||
};
|
||||
|
||||
localbus {
|
||||
compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
|
||||
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
|
||||
ranges = <0 0 0xff800000 0x00800000
|
||||
1 0 0x80000000 0x00800000
|
||||
3 0 0x80000000 0x00800000>;
|
||||
|
||||
@ -12,244 +12,92 @@
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/include/ "mpc5200b.dtsi"
|
||||
|
||||
/ {
|
||||
model = "phytec,pcm030";
|
||||
compatible = "phytec,pcm030";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
interrupt-parent = <&mpc5200_pic>;
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,5200@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0>;
|
||||
d-cache-line-size = <32>;
|
||||
i-cache-line-size = <32>;
|
||||
d-cache-size = <0x4000>; // L1, 16K
|
||||
i-cache-size = <0x4000>; // L1, 16K
|
||||
timebase-frequency = <0>; // from bootloader
|
||||
bus-frequency = <0>; // from bootloader
|
||||
clock-frequency = <0>; // from bootloader
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x04000000>; // 64MB
|
||||
};
|
||||
|
||||
soc5200@f0000000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,mpc5200b-immr";
|
||||
ranges = <0 0xf0000000 0x0000c000>;
|
||||
bus-frequency = <0>; // from bootloader
|
||||
system-frequency = <0>; // from bootloader
|
||||
|
||||
cdm@200 {
|
||||
compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
|
||||
reg = <0x200 0x38>;
|
||||
};
|
||||
|
||||
mpc5200_pic: interrupt-controller@500 {
|
||||
// 5200 interrupts are encoded into two levels;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <3>;
|
||||
compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
|
||||
reg = <0x500 0x80>;
|
||||
};
|
||||
|
||||
timer@600 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x600 0x10>;
|
||||
interrupts = <1 9 0>;
|
||||
timer@600 { // General Purpose Timer
|
||||
fsl,has-wdt;
|
||||
};
|
||||
|
||||
timer@610 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x610 0x10>;
|
||||
interrupts = <1 10 0>;
|
||||
};
|
||||
|
||||
gpt2: timer@620 { // General Purpose Timer in GPIO mode
|
||||
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
|
||||
reg = <0x620 0x10>;
|
||||
interrupts = <1 11 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpt3: timer@630 { // General Purpose Timer in GPIO mode
|
||||
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
|
||||
reg = <0x630 0x10>;
|
||||
interrupts = <1 12 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpt4: timer@640 { // General Purpose Timer in GPIO mode
|
||||
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
|
||||
reg = <0x640 0x10>;
|
||||
interrupts = <1 13 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpt5: timer@650 { // General Purpose Timer in GPIO mode
|
||||
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
|
||||
reg = <0x650 0x10>;
|
||||
interrupts = <1 14 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpt6: timer@660 { // General Purpose Timer in GPIO mode
|
||||
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
|
||||
reg = <0x660 0x10>;
|
||||
interrupts = <1 15 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpt7: timer@670 { // General Purpose Timer in GPIO mode
|
||||
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
|
||||
reg = <0x670 0x10>;
|
||||
interrupts = <1 16 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
rtc@800 { // Real time clock
|
||||
compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
|
||||
reg = <0x800 0x100>;
|
||||
interrupts = <1 5 0 1 6 0>;
|
||||
};
|
||||
|
||||
can@900 {
|
||||
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
|
||||
interrupts = <2 17 0>;
|
||||
reg = <0x900 0x80>;
|
||||
};
|
||||
|
||||
can@980 {
|
||||
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
|
||||
interrupts = <2 18 0>;
|
||||
reg = <0x980 0x80>;
|
||||
};
|
||||
|
||||
gpio_simple: gpio@b00 {
|
||||
compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
|
||||
reg = <0xb00 0x40>;
|
||||
interrupts = <1 7 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpio_wkup: gpio@c00 {
|
||||
compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
|
||||
reg = <0xc00 0x40>;
|
||||
interrupts = <1 8 0 0 3 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
spi@f00 {
|
||||
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
|
||||
reg = <0xf00 0x20>;
|
||||
interrupts = <2 13 0 2 14 0>;
|
||||
};
|
||||
|
||||
usb@1000 {
|
||||
compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
|
||||
reg = <0x1000 0xff>;
|
||||
interrupts = <2 6 0>;
|
||||
};
|
||||
|
||||
dma-controller@1200 {
|
||||
compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
|
||||
reg = <0x1200 0x80>;
|
||||
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
|
||||
3 4 0 3 5 0 3 6 0 3 7 0
|
||||
3 8 0 3 9 0 3 10 0 3 11 0
|
||||
3 12 0 3 13 0 3 14 0 3 15 0>;
|
||||
};
|
||||
|
||||
xlb@1f00 {
|
||||
compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
|
||||
reg = <0x1f00 0x100>;
|
||||
};
|
||||
|
||||
psc@2000 { /* PSC1 in ac97 mode */
|
||||
compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
|
||||
cell-index = <0>;
|
||||
reg = <0x2000 0x100>;
|
||||
interrupts = <2 1 0>;
|
||||
};
|
||||
|
||||
/* PSC2 port is used by CAN1/2 */
|
||||
psc@2200 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
psc@2400 { /* PSC3 in UART mode */
|
||||
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
|
||||
reg = <0x2400 0x100>;
|
||||
interrupts = <2 3 0>;
|
||||
};
|
||||
|
||||
/* PSC4 is ??? */
|
||||
psc@2600 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/* PSC5 is ??? */
|
||||
psc@2800 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
psc@2c00 { /* PSC6 in UART mode */
|
||||
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
|
||||
reg = <0x2c00 0x100>;
|
||||
interrupts = <2 4 0>;
|
||||
};
|
||||
|
||||
ethernet@3000 {
|
||||
compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
|
||||
reg = <0x3000 0x400>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <2 5 0>;
|
||||
phy-handle = <&phy0>;
|
||||
};
|
||||
|
||||
mdio@3000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
|
||||
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
|
||||
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
ata@3a00 {
|
||||
compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
|
||||
reg = <0x3a00 0x100>;
|
||||
interrupts = <2 7 0>;
|
||||
};
|
||||
|
||||
i2c@3d00 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
|
||||
reg = <0x3d00 0x40>;
|
||||
interrupts = <2 15 0>;
|
||||
};
|
||||
|
||||
i2c@3d40 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
|
||||
reg = <0x3d40 0x40>;
|
||||
interrupts = <2 16 0>;
|
||||
rtc@51 {
|
||||
compatible = "nxp,pcf8563";
|
||||
reg = <0x51>;
|
||||
@ -268,12 +116,6 @@
|
||||
};
|
||||
|
||||
pci@f0000d00 {
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
|
||||
reg = <0xf0000d00 0x100>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
|
||||
0xc000 0 0 2 &mpc5200_pic 1 1 3
|
||||
@ -284,11 +126,12 @@
|
||||
0xc800 0 0 2 &mpc5200_pic 1 2 3
|
||||
0xc800 0 0 3 &mpc5200_pic 1 3 3
|
||||
0xc800 0 0 4 &mpc5200_pic 0 0 3>;
|
||||
clock-frequency = <0>; // From boot loader
|
||||
interrupts = <2 8 0 2 9 0 2 10 0>;
|
||||
bus-range = <0 0>;
|
||||
ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
|
||||
0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
|
||||
0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
|
||||
};
|
||||
|
||||
localbus {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
@ -12,99 +12,37 @@
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/include/ "mpc5200b.dtsi"
|
||||
|
||||
/ {
|
||||
model = "phytec,pcm032";
|
||||
compatible = "phytec,pcm032";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
interrupt-parent = <&mpc5200_pic>;
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,5200@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0>;
|
||||
d-cache-line-size = <32>;
|
||||
i-cache-line-size = <32>;
|
||||
d-cache-size = <0x4000>; // L1, 16K
|
||||
i-cache-size = <0x4000>; // L1, 16K
|
||||
timebase-frequency = <0>; // from bootloader
|
||||
bus-frequency = <0>; // from bootloader
|
||||
clock-frequency = <0>; // from bootloader
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x08000000>; // 128MB
|
||||
};
|
||||
|
||||
soc5200@f0000000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,mpc5200b-immr";
|
||||
ranges = <0 0xf0000000 0x0000c000>;
|
||||
bus-frequency = <0>; // from bootloader
|
||||
system-frequency = <0>; // from bootloader
|
||||
|
||||
cdm@200 {
|
||||
compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
|
||||
reg = <0x200 0x38>;
|
||||
};
|
||||
|
||||
mpc5200_pic: interrupt-controller@500 {
|
||||
// 5200 interrupts are encoded into two levels;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <3>;
|
||||
compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
|
||||
reg = <0x500 0x80>;
|
||||
};
|
||||
|
||||
timer@600 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x600 0x10>;
|
||||
interrupts = <1 9 0>;
|
||||
timer@600 { // General Purpose Timer
|
||||
fsl,has-wdt;
|
||||
};
|
||||
|
||||
timer@610 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x610 0x10>;
|
||||
interrupts = <1 10 0>;
|
||||
};
|
||||
|
||||
gpt2: timer@620 { // General Purpose Timer in GPIO mode
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x620 0x10>;
|
||||
interrupts = <1 11 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpt3: timer@630 { // General Purpose Timer in GPIO mode
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x630 0x10>;
|
||||
interrupts = <1 12 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpt4: timer@640 { // General Purpose Timer in GPIO mode
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x640 0x10>;
|
||||
interrupts = <1 13 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpt5: timer@650 { // General Purpose Timer in GPIO mode
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x650 0x10>;
|
||||
interrupts = <1 14 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
@ -118,138 +56,49 @@
|
||||
};
|
||||
|
||||
gpt7: timer@670 { // General Purpose Timer in GPIO mode
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x670 0x10>;
|
||||
interrupts = <1 16 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
rtc@800 { // Real time clock
|
||||
compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
|
||||
reg = <0x800 0x100>;
|
||||
interrupts = <1 5 0 1 6 0>;
|
||||
};
|
||||
|
||||
can@900 {
|
||||
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
|
||||
interrupts = <2 17 0>;
|
||||
reg = <0x900 0x80>;
|
||||
};
|
||||
|
||||
can@980 {
|
||||
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
|
||||
interrupts = <2 18 0>;
|
||||
reg = <0x980 0x80>;
|
||||
};
|
||||
|
||||
gpio_simple: gpio@b00 {
|
||||
compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
|
||||
reg = <0xb00 0x40>;
|
||||
interrupts = <1 7 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpio_wkup: gpio@c00 {
|
||||
compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
|
||||
reg = <0xc00 0x40>;
|
||||
interrupts = <1 8 0 0 3 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
spi@f00 {
|
||||
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
|
||||
reg = <0xf00 0x20>;
|
||||
interrupts = <2 13 0 2 14 0>;
|
||||
};
|
||||
|
||||
usb@1000 {
|
||||
compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
|
||||
reg = <0x1000 0xff>;
|
||||
interrupts = <2 6 0>;
|
||||
};
|
||||
|
||||
dma-controller@1200 {
|
||||
compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
|
||||
reg = <0x1200 0x80>;
|
||||
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
|
||||
3 4 0 3 5 0 3 6 0 3 7 0
|
||||
3 8 0 3 9 0 3 10 0 3 11 0
|
||||
3 12 0 3 13 0 3 14 0 3 15 0>;
|
||||
};
|
||||
|
||||
xlb@1f00 {
|
||||
compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
|
||||
reg = <0x1f00 0x100>;
|
||||
};
|
||||
|
||||
psc@2000 { /* PSC1 is ac97 */
|
||||
compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
|
||||
cell-index = <0>;
|
||||
reg = <0x2000 0x100>;
|
||||
interrupts = <2 1 0>;
|
||||
};
|
||||
|
||||
/* PSC2 port is used by CAN1/2 */
|
||||
psc@2200 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
psc@2400 { /* PSC3 in UART mode */
|
||||
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
|
||||
reg = <0x2400 0x100>;
|
||||
interrupts = <2 3 0>;
|
||||
};
|
||||
|
||||
/* PSC4 is ??? */
|
||||
psc@2600 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/* PSC5 is ??? */
|
||||
psc@2800 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
psc@2c00 { /* PSC6 in UART mode */
|
||||
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
|
||||
reg = <0x2c00 0x100>;
|
||||
interrupts = <2 4 0>;
|
||||
};
|
||||
|
||||
ethernet@3000 {
|
||||
compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
|
||||
reg = <0x3000 0x400>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <2 5 0>;
|
||||
phy-handle = <&phy0>;
|
||||
};
|
||||
|
||||
mdio@3000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
|
||||
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
|
||||
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
ata@3a00 {
|
||||
compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
|
||||
reg = <0x3a00 0x100>;
|
||||
interrupts = <2 7 0>;
|
||||
};
|
||||
|
||||
i2c@3d00 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
|
||||
reg = <0x3d00 0x40>;
|
||||
interrupts = <2 15 0>;
|
||||
};
|
||||
|
||||
i2c@3d40 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
|
||||
reg = <0x3d40 0x40>;
|
||||
interrupts = <2 16 0>;
|
||||
rtc@51 {
|
||||
compatible = "nxp,pcf8563";
|
||||
reg = <0x51>;
|
||||
@ -260,20 +109,9 @@
|
||||
pagesize = <32>;
|
||||
};
|
||||
};
|
||||
|
||||
sram@8000 {
|
||||
compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
|
||||
reg = <0x8000 0x4000>;
|
||||
};
|
||||
};
|
||||
|
||||
pci@f0000d00 {
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
|
||||
reg = <0xf0000d00 0x100>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
|
||||
0xc000 0 0 2 &mpc5200_pic 1 1 3
|
||||
@ -284,20 +122,12 @@
|
||||
0xc800 0 0 2 &mpc5200_pic 1 2 3
|
||||
0xc800 0 0 3 &mpc5200_pic 1 3 3
|
||||
0xc800 0 0 4 &mpc5200_pic 0 0 3>;
|
||||
clock-frequency = <0>; // From boot loader
|
||||
interrupts = <2 8 0 2 9 0 2 10 0>;
|
||||
bus-range = <0 0>;
|
||||
ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
|
||||
0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
|
||||
0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
|
||||
};
|
||||
|
||||
localbus {
|
||||
compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
|
||||
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
|
||||
ranges = <0 0 0xfe000000 0x02000000
|
||||
1 0 0xfc000000 0x02000000
|
||||
2 0 0xfbe00000 0x00200000
|
||||
@ -350,40 +180,39 @@
|
||||
bank-width = <2>;
|
||||
};
|
||||
|
||||
/*
|
||||
/*
|
||||
* example snippets for FPGA
|
||||
*
|
||||
* fpga@3,0 {
|
||||
* compatible = "fpga_driver";
|
||||
* reg = <3 0 0x02000000>;
|
||||
* bank-width = <4>;
|
||||
* compatible = "fpga_driver";
|
||||
* reg = <3 0 0x02000000>;
|
||||
* bank-width = <4>;
|
||||
* };
|
||||
*
|
||||
* fpga@4,0 {
|
||||
* compatible = "fpga_driver";
|
||||
* reg = <4 0 0x02000000>;
|
||||
* bank-width = <4>;
|
||||
* compatible = "fpga_driver";
|
||||
* reg = <4 0 0x02000000>;
|
||||
* bank-width = <4>;
|
||||
* };
|
||||
*/
|
||||
*/
|
||||
|
||||
/*
|
||||
/*
|
||||
* example snippets for free chipselects
|
||||
*
|
||||
*
|
||||
* device@5,0 {
|
||||
* compatible = "custom_driver";
|
||||
* reg = <5 0 0x02000000>;
|
||||
* compatible = "custom_driver";
|
||||
* reg = <5 0 0x02000000>;
|
||||
* };
|
||||
*
|
||||
*
|
||||
* device@6,0 {
|
||||
* compatible = "custom_driver";
|
||||
* reg = <6 0 0x02000000>;
|
||||
* compatible = "custom_driver";
|
||||
* reg = <6 0 0x02000000>;
|
||||
* };
|
||||
*
|
||||
*
|
||||
* device@7,0 {
|
||||
* compatible = "custom_driver";
|
||||
* reg = <7 0 0x02000000>;
|
||||
* compatible = "custom_driver";
|
||||
* reg = <7 0 0x02000000>;
|
||||
* };
|
||||
*/
|
||||
*/
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
@ -11,79 +11,24 @@
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/include/ "mpc5200b.dtsi"
|
||||
|
||||
/ {
|
||||
model = "manroland,uc101";
|
||||
compatible = "manroland,uc101";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
interrupt-parent = <&mpc5200_pic>;
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,5200@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0>;
|
||||
d-cache-line-size = <32>;
|
||||
i-cache-line-size = <32>;
|
||||
d-cache-size = <0x4000>; // L1, 16K
|
||||
i-cache-size = <0x4000>; // L1, 16K
|
||||
timebase-frequency = <0>; // from bootloader
|
||||
bus-frequency = <0>; // from bootloader
|
||||
clock-frequency = <0>; // from bootloader
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x04000000>; // 64MB
|
||||
};
|
||||
|
||||
soc5200@f0000000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,mpc5200b-immr";
|
||||
ranges = <0 0xf0000000 0x0000c000>;
|
||||
reg = <0xf0000000 0x00000100>;
|
||||
bus-frequency = <0>; // from bootloader
|
||||
system-frequency = <0>; // from bootloader
|
||||
|
||||
cdm@200 {
|
||||
compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
|
||||
reg = <0x200 0x38>;
|
||||
};
|
||||
|
||||
mpc5200_pic: interrupt-controller@500 {
|
||||
// 5200 interrupts are encoded into two levels;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <3>;
|
||||
compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
|
||||
reg = <0x500 0x80>;
|
||||
};
|
||||
|
||||
gpt0: timer@600 { // General Purpose Timer in GPIO mode
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x600 0x10>;
|
||||
interrupts = <1 9 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpt1: timer@610 { // General Purpose Timer in GPIO mode
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x610 0x10>;
|
||||
interrupts = <1 10 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpt2: timer@620 { // General Purpose Timer in GPIO mode
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x620 0x10>;
|
||||
interrupts = <1 11 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
@ -97,118 +42,85 @@
|
||||
};
|
||||
|
||||
gpt4: timer@640 { // General Purpose Timer in GPIO mode
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x640 0x10>;
|
||||
interrupts = <1 13 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpt5: timer@650 { // General Purpose Timer in GPIO mode
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x650 0x10>;
|
||||
interrupts = <1 14 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpt6: timer@660 { // General Purpose Timer in GPIO mode
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x660 0x10>;
|
||||
interrupts = <1 15 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpt7: timer@670 { // General Purpose Timer in GPIO mode
|
||||
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
||||
reg = <0x670 0x10>;
|
||||
interrupts = <1 16 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpio_simple: gpio@b00 {
|
||||
compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
|
||||
reg = <0xb00 0x40>;
|
||||
interrupts = <1 7 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
rtc@800 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpio_wkup: gpio@c00 {
|
||||
compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
|
||||
reg = <0xc00 0x40>;
|
||||
interrupts = <1 8 0 0 3 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
can@900 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
dma-controller@1200 {
|
||||
compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
|
||||
reg = <0x1200 0x80>;
|
||||
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
|
||||
3 4 0 3 5 0 3 6 0 3 7 0
|
||||
3 8 0 3 9 0 3 10 0 3 11 0
|
||||
3 12 0 3 13 0 3 14 0 3 15 0>;
|
||||
can@980 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
xlb@1f00 {
|
||||
compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
|
||||
reg = <0x1f00 0x100>;
|
||||
spi@f00 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
psc@2000 { /* PSC1 in UART mode */
|
||||
usb@1000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
psc@2000 { // PSC1
|
||||
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
|
||||
reg = <0x2000 0x100>;
|
||||
interrupts = <2 1 0>;
|
||||
};
|
||||
|
||||
psc@2200 { /* PSC2 in UART mode */
|
||||
psc@2200 { // PSC2
|
||||
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
|
||||
reg = <0x2200 0x100>;
|
||||
interrupts = <2 2 0>;
|
||||
};
|
||||
|
||||
psc@2c00 { /* PSC6 in UART mode */
|
||||
psc@2400 { // PSC3
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
psc@2600 { // PSC4
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
psc@2800 { // PSC5
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
psc@2c00 { // PSC6
|
||||
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
|
||||
reg = <0x2c00 0x100>;
|
||||
interrupts = <2 4 0>;
|
||||
};
|
||||
|
||||
ethernet@3000 {
|
||||
compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
|
||||
reg = <0x3000 0x400>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <2 5 0>;
|
||||
phy-handle = <&phy0>;
|
||||
};
|
||||
|
||||
mdio@3000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
|
||||
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
|
||||
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
compatible = "intel,lxt971";
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
ata@3a00 {
|
||||
compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
|
||||
reg = <0x3a00 0x100>;
|
||||
interrupts = <2 7 0>;
|
||||
i2c@3d00 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@3d40 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
|
||||
reg = <0x3d40 0x40>;
|
||||
interrupts = <2 16 0>;
|
||||
fsl,preserve-clocking;
|
||||
clock-frequency = <400000>;
|
||||
|
||||
@ -221,19 +133,13 @@
|
||||
reg = <0x51>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sram@8000 {
|
||||
compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
|
||||
reg = <0x8000 0x4000>;
|
||||
};
|
||||
pci@f0000d00 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
localbus {
|
||||
compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
|
||||
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
|
||||
ranges = <0 0 0xff800000 0x00800000
|
||||
1 0 0x80000000 0x00800000
|
||||
3 0 0x80000000 0x00800000>;
|
||||
|
||||
Loading…
Reference in New Issue
Block a user