diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
index 9462ab7ddd1f..3c821cda1ad0 100644
--- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
@@ -48,7 +48,7 @@ Optional subnode-properties:
 
 Examples:
 
-pinctrl@01c20800 {
+pio: pinctrl@01c20800 {
 	compatible = "allwinner,sun5i-a13-pinctrl";
 	reg = <0x01c20800 0x400>;
 	#address-cells = <1>;
@@ -68,3 +68,38 @@ pinctrl@01c20800 {
 		allwinner,pull = <0>;
 	};
 };
+
+
+GPIO and interrupt controller
+-----------------------------
+
+This hardware also acts as a GPIO controller and an interrupt
+controller.
+
+Consumers that would want to refer to one or the other (or both)
+should provide through the usual *-gpios and interrupts properties a
+cell with 3 arguments, first the number of the bank, then the pin
+inside that bank, and finally the flags for the GPIO/interrupts.
+
+Example:
+
+xio: gpio@38 {
+	compatible = "nxp,pcf8574a";
+	reg = <0x38>;
+
+	gpio-controller;
+	#gpio-cells = <2>;
+
+	interrupt-parent = <&pio>;
+	interrupts = <6 0 IRQ_TYPE_EDGE_FALLING>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+};
+
+reg_usb1_vbus: usb1-vbus {
+	compatible = "regulator-fixed";
+	regulator-name = "usb1-vbus";
+	regulator-min-microvolt = <5000000>;
+	regulator-max-microvolt = <5000000>;
+	gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>;
+};
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
index 7f7e7bb4f22c..fb4669c0ce0e 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
@@ -711,6 +711,37 @@ static struct irq_chip sunxi_pinctrl_level_irq_chip = {
 			  IRQCHIP_EOI_IF_HANDLED,
 };
 
+static int sunxi_pinctrl_irq_of_xlate(struct irq_domain *d,
+				      struct device_node *node,
+				      const u32 *intspec,
+				      unsigned int intsize,
+				      unsigned long *out_hwirq,
+				      unsigned int *out_type)
+{
+	struct sunxi_desc_function *desc;
+	int pin, base;
+
+	if (intsize < 3)
+		return -EINVAL;
+
+	base = PINS_PER_BANK * intspec[0];
+	pin = base + intspec[1];
+
+	desc = sunxi_pinctrl_desc_find_function_by_pin(d->host_data,
+						       pin, "irq");
+	if (!desc)
+		return -EINVAL;
+
+	*out_hwirq = desc->irqbank * PINS_PER_BANK + desc->irqnum;
+	*out_type = intspec[2];
+
+	return 0;
+}
+
+static struct irq_domain_ops sunxi_pinctrl_irq_domain_ops = {
+	.xlate		= sunxi_pinctrl_irq_of_xlate,
+};
+
 static void sunxi_pinctrl_irq_handler(unsigned __irq, struct irq_desc *desc)
 {
 	unsigned int irq = irq_desc_get_irq(desc);
@@ -986,8 +1017,8 @@ int sunxi_pinctrl_init(struct platform_device *pdev,
 
 	pctl->domain = irq_domain_add_linear(node,
 					     pctl->desc->irq_banks * IRQ_PER_BANK,
-					     &irq_domain_simple_ops,
-					     NULL);
+					     &sunxi_pinctrl_irq_domain_ops,
+					     pctl);
 	if (!pctl->domain) {
 		dev_err(&pdev->dev, "Couldn't register IRQ domain\n");
 		ret = -ENOMEM;