From dfe42443ea1d30c98db59b7b1f914bc147d31336 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker <paul.gortmaker@windriver.com> Date: Thu, 8 Mar 2012 19:12:11 -0500 Subject: [PATCH] serial: reduce number of indirections in 8250 code The serial_8250_port struct contains within a serial_port struct and many times one or the other, or both are in scope within functions via a passed in arg, or via container_of. However there are a lot of cases where we have access directly to the port pointer, but yet go through the parent 8250_port structure instead to get it. These should just use the port struct directly. Similarly there are cases where it makes sense (from a code cleanliness point of view) to declare a local for the port struct, so we aren't going through the parent 8250_port struct repeatedly to get to it. We get a small reduction in text size, but it appears that gcc was smart enough to internally be doing most of this already, so the readability improvement is the larger gain. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/tty/serial/8250/8250.c | 322 +++++++++++++++++---------------- 1 file changed, 167 insertions(+), 155 deletions(-) diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c index 6a71716111ae..a0d114d8baef 100644 --- a/drivers/tty/serial/8250/8250.c +++ b/drivers/tty/serial/8250/8250.c @@ -1040,24 +1040,25 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) { unsigned char status1, scratch, scratch2, scratch3; unsigned char save_lcr, save_mcr; + struct uart_port *port = &up->port; unsigned long flags; - if (!up->port.iobase && !up->port.mapbase && !up->port.membase) + if (!port->iobase && !port->mapbase && !port->membase) return; DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04lx, 0x%p): ", - serial_index(&up->port), up->port.iobase, up->port.membase); + serial_index(port), port->iobase, port->membase); /* * We really do need global IRQs disabled here - we're going to * be frobbing the chips IRQ enable register to see if it exists. */ - spin_lock_irqsave(&up->port.lock, flags); + spin_lock_irqsave(&port->lock, flags); up->capabilities = 0; up->bugs = 0; - if (!(up->port.flags & UPF_BUGGY_UART)) { + if (!(port->flags & UPF_BUGGY_UART)) { /* * Do a simple existence test first; if we fail this, * there's no point trying anything else. @@ -1109,7 +1110,7 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) * manufacturer would be stupid enough to design a board * that conflicts with COM 1-4 --- we hope! */ - if (!(up->port.flags & UPF_SKIP_TEST)) { + if (!(port->flags & UPF_SKIP_TEST)) { serial_out(up, UART_MCR, UART_MCR_LOOP | 0x0A); status1 = serial_in(up, UART_MSR) & 0xF0; serial_out(up, UART_MCR, save_mcr); @@ -1143,10 +1144,10 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) autoconfig_8250(up); break; case 1: - up->port.type = PORT_UNKNOWN; + port->type = PORT_UNKNOWN; break; case 2: - up->port.type = PORT_16550; + port->type = PORT_16550; break; case 3: autoconfig_16550a(up); @@ -1157,13 +1158,12 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) /* * Only probe for RSA ports if we got the region. */ - if (up->port.type == PORT_16550A && probeflags & PROBE_RSA) { + if (port->type == PORT_16550A && probeflags & PROBE_RSA) { int i; for (i = 0 ; i < probe_rsa_count; ++i) { - if (probe_rsa[i] == up->port.iobase && - __enable_rsa(up)) { - up->port.type = PORT_RSA; + if (probe_rsa[i] == port->iobase && __enable_rsa(up)) { + port->type = PORT_RSA; break; } } @@ -1172,25 +1172,25 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) serial_out(up, UART_LCR, save_lcr); - if (up->capabilities != uart_config[up->port.type].flags) { + if (up->capabilities != uart_config[port->type].flags) { printk(KERN_WARNING "ttyS%d: detected caps %08x should be %08x\n", - serial_index(&up->port), up->capabilities, - uart_config[up->port.type].flags); + serial_index(port), up->capabilities, + uart_config[port->type].flags); } - up->port.fifosize = uart_config[up->port.type].fifo_size; - up->capabilities = uart_config[up->port.type].flags; - up->tx_loadsz = uart_config[up->port.type].tx_loadsz; + port->fifosize = uart_config[up->port.type].fifo_size; + up->capabilities = uart_config[port->type].flags; + up->tx_loadsz = uart_config[port->type].tx_loadsz; - if (up->port.type == PORT_UNKNOWN) + if (port->type == PORT_UNKNOWN) goto out; /* * Reset the UART. */ #ifdef CONFIG_SERIAL_8250_RSA - if (up->port.type == PORT_RSA) + if (port->type == PORT_RSA) serial_out(up, UART_RSA_FRR, 0); #endif serial_out(up, UART_MCR, save_mcr); @@ -1202,20 +1202,21 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) serial_out(up, UART_IER, 0); out: - spin_unlock_irqrestore(&up->port.lock, flags); - DEBUG_AUTOCONF("type=%s\n", uart_config[up->port.type].name); + spin_unlock_irqrestore(&port->lock, flags); + DEBUG_AUTOCONF("type=%s\n", uart_config[port->type].name); } static void autoconfig_irq(struct uart_8250_port *up) { + struct uart_port *port = &up->port; unsigned char save_mcr, save_ier; unsigned char save_ICP = 0; unsigned int ICP = 0; unsigned long irqs; int irq; - if (up->port.flags & UPF_FOURPORT) { - ICP = (up->port.iobase & 0xfe0) | 0x1f; + if (port->flags & UPF_FOURPORT) { + ICP = (port->iobase & 0xfe0) | 0x1f; save_ICP = inb_p(ICP); outb_p(0x80, ICP); inb_p(ICP); @@ -1230,7 +1231,7 @@ static void autoconfig_irq(struct uart_8250_port *up) irqs = probe_irq_on(); serial_out(up, UART_MCR, 0); udelay(10); - if (up->port.flags & UPF_FOURPORT) { + if (port->flags & UPF_FOURPORT) { serial_out(up, UART_MCR, UART_MCR_DTR | UART_MCR_RTS); } else { @@ -1249,10 +1250,10 @@ static void autoconfig_irq(struct uart_8250_port *up) serial_out(up, UART_MCR, save_mcr); serial_out(up, UART_IER, save_ier); - if (up->port.flags & UPF_FOURPORT) + if (port->flags & UPF_FOURPORT) outb_p(save_ICP, ICP); - up->port.irq = (irq > 0) ? irq : 0; + port->irq = (irq > 0) ? irq : 0; } static inline void __stop_tx(struct uart_8250_port *p) @@ -1273,7 +1274,7 @@ static void serial8250_stop_tx(struct uart_port *port) /* * We really want to stop the transmitter from sending. */ - if (up->port.type == PORT_16C950) { + if (port->type == PORT_16C950) { up->acr |= UART_ACR_TXDIS; serial_icr_write(up, UART_ACR, up->acr); } @@ -1292,7 +1293,7 @@ static void serial8250_start_tx(struct uart_port *port) unsigned char lsr; lsr = serial_in(up, UART_LSR); up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; - if ((up->port.type == PORT_RM9000) ? + if ((port->type == PORT_RM9000) ? (lsr & UART_LSR_THRE) : (lsr & UART_LSR_TEMT)) serial8250_tx_chars(up); @@ -1302,7 +1303,7 @@ static void serial8250_start_tx(struct uart_port *port) /* * Re-enable the transmitter if we disabled it. */ - if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) { + if (port->type == PORT_16C950 && up->acr & UART_ACR_TXDIS) { up->acr &= ~UART_ACR_TXDIS; serial_icr_write(up, UART_ACR, up->acr); } @@ -1360,7 +1361,8 @@ static void clear_rx_fifo(struct uart_8250_port *up) unsigned char serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr) { - struct tty_struct *tty = up->port.state->port.tty; + struct uart_port *port = &up->port; + struct tty_struct *tty = port->state->port.tty; unsigned char ch; int max_count = 256; char flag; @@ -1379,7 +1381,7 @@ serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr) ch = 0; flag = TTY_NORMAL; - up->port.icount.rx++; + port->icount.rx++; lsr |= up->lsr_saved_flags; up->lsr_saved_flags = 0; @@ -1390,12 +1392,12 @@ serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr) */ if (lsr & UART_LSR_BI) { lsr &= ~(UART_LSR_FE | UART_LSR_PE); - up->port.icount.brk++; + port->icount.brk++; /* * If tegra port then clear the rx fifo to * accept another break/character. */ - if (up->port.type == PORT_TEGRA) + if (port->type == PORT_TEGRA) clear_rx_fifo(up); /* @@ -1404,19 +1406,19 @@ serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr) * may get masked by ignore_status_mask * or read_status_mask. */ - if (uart_handle_break(&up->port)) + if (uart_handle_break(port)) goto ignore_char; } else if (lsr & UART_LSR_PE) - up->port.icount.parity++; + port->icount.parity++; else if (lsr & UART_LSR_FE) - up->port.icount.frame++; + port->icount.frame++; if (lsr & UART_LSR_OE) - up->port.icount.overrun++; + port->icount.overrun++; /* * Mask off conditions which should be ignored. */ - lsr &= up->port.read_status_mask; + lsr &= port->read_status_mask; if (lsr & UART_LSR_BI) { DEBUG_INTR("handling break...."); @@ -1426,34 +1428,35 @@ serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr) else if (lsr & UART_LSR_FE) flag = TTY_FRAME; } - if (uart_handle_sysrq_char(&up->port, ch)) + if (uart_handle_sysrq_char(port, ch)) goto ignore_char; - uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag); + uart_insert_char(port, lsr, UART_LSR_OE, ch, flag); ignore_char: lsr = serial_in(up, UART_LSR); } while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0)); - spin_unlock(&up->port.lock); + spin_unlock(&port->lock); tty_flip_buffer_push(tty); - spin_lock(&up->port.lock); + spin_lock(&port->lock); return lsr; } EXPORT_SYMBOL_GPL(serial8250_rx_chars); void serial8250_tx_chars(struct uart_8250_port *up) { - struct circ_buf *xmit = &up->port.state->xmit; + struct uart_port *port = &up->port; + struct circ_buf *xmit = &port->state->xmit; int count; - if (up->port.x_char) { - serial_out(up, UART_TX, up->port.x_char); - up->port.icount.tx++; - up->port.x_char = 0; + if (port->x_char) { + serial_out(up, UART_TX, port->x_char); + port->icount.tx++; + port->x_char = 0; return; } - if (uart_tx_stopped(&up->port)) { - serial8250_stop_tx(&up->port); + if (uart_tx_stopped(port)) { + serial8250_stop_tx(port); return; } if (uart_circ_empty(xmit)) { @@ -1465,13 +1468,13 @@ void serial8250_tx_chars(struct uart_8250_port *up) do { serial_out(up, UART_TX, xmit->buf[xmit->tail]); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - up->port.icount.tx++; + port->icount.tx++; if (uart_circ_empty(xmit)) break; } while (--count > 0); if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); + uart_write_wakeup(port); DEBUG_INTR("THRE..."); @@ -1482,22 +1485,23 @@ EXPORT_SYMBOL_GPL(serial8250_tx_chars); unsigned int serial8250_modem_status(struct uart_8250_port *up) { + struct uart_port *port = &up->port; unsigned int status = serial_in(up, UART_MSR); status |= up->msr_saved_flags; up->msr_saved_flags = 0; if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI && - up->port.state != NULL) { + port->state != NULL) { if (status & UART_MSR_TERI) - up->port.icount.rng++; + port->icount.rng++; if (status & UART_MSR_DDSR) - up->port.icount.dsr++; + port->icount.dsr++; if (status & UART_MSR_DDCD) - uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); + uart_handle_dcd_change(port, status & UART_MSR_DCD); if (status & UART_MSR_DCTS) - uart_handle_cts_change(&up->port, status & UART_MSR_CTS); + uart_handle_cts_change(port, status & UART_MSR_CTS); - wake_up_interruptible(&up->port.state->port.delta_msr_wait); + wake_up_interruptible(&port->state->port.delta_msr_wait); } return status; @@ -1517,7 +1521,7 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir) if (iir & UART_IIR_NO_INT) return 0; - spin_lock_irqsave(&up->port.lock, flags); + spin_lock_irqsave(&port->lock, flags); status = serial_in(up, UART_LSR); @@ -1529,7 +1533,7 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir) if (status & UART_LSR_THRE) serial8250_tx_chars(up); - spin_unlock_irqrestore(&up->port.lock, flags); + spin_unlock_irqrestore(&port->lock, flags); return 1; } EXPORT_SYMBOL_GPL(serial8250_handle_irq); @@ -1771,10 +1775,10 @@ static unsigned int serial8250_tx_empty(struct uart_port *port) unsigned long flags; unsigned int lsr; - spin_lock_irqsave(&up->port.lock, flags); + spin_lock_irqsave(&port->lock, flags); lsr = serial_in(up, UART_LSR); up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; - spin_unlock_irqrestore(&up->port.lock, flags); + spin_unlock_irqrestore(&port->lock, flags); return (lsr & BOTH_EMPTY) == BOTH_EMPTY ? TIOCSER_TEMT : 0; } @@ -1828,13 +1832,13 @@ static void serial8250_break_ctl(struct uart_port *port, int break_state) container_of(port, struct uart_8250_port, port); unsigned long flags; - spin_lock_irqsave(&up->port.lock, flags); + spin_lock_irqsave(&port->lock, flags); if (break_state == -1) up->lcr |= UART_LCR_SBC; else up->lcr &= ~UART_LCR_SBC; serial_out(up, UART_LCR, up->lcr); - spin_unlock_irqrestore(&up->port.lock, flags); + spin_unlock_irqrestore(&port->lock, flags); } /* @@ -1935,15 +1939,15 @@ static int serial8250_startup(struct uart_port *port) unsigned char lsr, iir; int retval; - up->port.fifosize = uart_config[up->port.type].fifo_size; + port->fifosize = uart_config[up->port.type].fifo_size; up->tx_loadsz = uart_config[up->port.type].tx_loadsz; up->capabilities = uart_config[up->port.type].flags; up->mcr = 0; - if (up->port.iotype != up->cur_iotype) + if (port->iotype != up->cur_iotype) set_io_from_upio(port); - if (up->port.type == PORT_16C950) { + if (port->type == PORT_16C950) { /* Wake up and initialize UART */ up->acr = 0; serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); @@ -1983,17 +1987,17 @@ static int serial8250_startup(struct uart_port *port) * if it is, then bail out, because there's likely no UART * here. */ - if (!(up->port.flags & UPF_BUGGY_UART) && + if (!(port->flags & UPF_BUGGY_UART) && (serial_in(up, UART_LSR) == 0xff)) { printk_ratelimited(KERN_INFO "ttyS%d: LSR safety check engaged!\n", - serial_index(&up->port)); + serial_index(port)); return -ENODEV; } /* * For a XR16C850, we need to set the trigger levels */ - if (up->port.type == PORT_16850) { + if (port->type == PORT_16850) { unsigned char fctr; serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); @@ -2007,7 +2011,7 @@ static int serial8250_startup(struct uart_port *port) serial_out(up, UART_LCR, 0); } - if (up->port.irq) { + if (port->irq) { unsigned char iir1; /* * Test for UARTs that do not reassert THRE when the @@ -2017,9 +2021,9 @@ static int serial8250_startup(struct uart_port *port) * the interrupt is enabled. Delays are necessary to * allow register changes to become visible. */ - spin_lock_irqsave(&up->port.lock, flags); + spin_lock_irqsave(&port->lock, flags); if (up->port.irqflags & IRQF_SHARED) - disable_irq_nosync(up->port.irq); + disable_irq_nosync(port->irq); wait_for_xmitr(up, UART_LSR_THRE); serial_out_sync(up, UART_IER, UART_IER_THRI); @@ -2031,9 +2035,9 @@ static int serial8250_startup(struct uart_port *port) iir = serial_in(up, UART_IIR); serial_out(up, UART_IER, 0); - if (up->port.irqflags & IRQF_SHARED) - enable_irq(up->port.irq); - spin_unlock_irqrestore(&up->port.lock, flags); + if (port->irqflags & IRQF_SHARED) + enable_irq(port->irq); + spin_unlock_irqrestore(&port->lock, flags); /* * If the interrupt is not reasserted, setup a timer to @@ -2062,7 +2066,7 @@ static int serial8250_startup(struct uart_port *port) * hardware interrupt, we use a timer-based system. The original * driver used to do this with IRQ0. */ - if (!up->port.irq) { + if (!port->irq) { up->timer.data = (unsigned long)up; mod_timer(&up->timer, jiffies + uart_poll_timeout(port)); } else { @@ -2076,7 +2080,7 @@ static int serial8250_startup(struct uart_port *port) */ serial_out(up, UART_LCR, UART_LCR_WLEN8); - spin_lock_irqsave(&up->port.lock, flags); + spin_lock_irqsave(&port->lock, flags); if (up->port.flags & UPF_FOURPORT) { if (!up->port.irq) up->port.mctrl |= TIOCM_OUT1; @@ -2084,10 +2088,10 @@ static int serial8250_startup(struct uart_port *port) /* * Most PC uarts need OUT2 raised to enable interrupts. */ - if (up->port.irq) + if (port->irq) up->port.mctrl |= TIOCM_OUT2; - serial8250_set_mctrl(&up->port, up->port.mctrl); + serial8250_set_mctrl(port, port->mctrl); /* Serial over Lan (SoL) hack: Intel 8257x Gigabit ethernet chips have a @@ -2123,7 +2127,7 @@ static int serial8250_startup(struct uart_port *port) } dont_test_tx_en: - spin_unlock_irqrestore(&up->port.lock, flags); + spin_unlock_irqrestore(&port->lock, flags); /* * Clear the interrupt registers again for luck, and clear the @@ -2145,12 +2149,12 @@ dont_test_tx_en: up->ier = UART_IER_RLSI | UART_IER_RDI; serial_out(up, UART_IER, up->ier); - if (up->port.flags & UPF_FOURPORT) { + if (port->flags & UPF_FOURPORT) { unsigned int icp; /* * Enable interrupts on the AST Fourport board */ - icp = (up->port.iobase & 0xfe0) | 0x01f; + icp = (port->iobase & 0xfe0) | 0x01f; outb_p(0x80, icp); inb_p(icp); } @@ -2170,16 +2174,16 @@ static void serial8250_shutdown(struct uart_port *port) up->ier = 0; serial_out(up, UART_IER, 0); - spin_lock_irqsave(&up->port.lock, flags); - if (up->port.flags & UPF_FOURPORT) { + spin_lock_irqsave(&port->lock, flags); + if (port->flags & UPF_FOURPORT) { /* reset interrupts on the AST Fourport board */ - inb((up->port.iobase & 0xfe0) | 0x1f); - up->port.mctrl |= TIOCM_OUT1; + inb((port->iobase & 0xfe0) | 0x1f); + port->mctrl |= TIOCM_OUT1; } else - up->port.mctrl &= ~TIOCM_OUT2; + port->mctrl &= ~TIOCM_OUT2; - serial8250_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); + serial8250_set_mctrl(port, port->mctrl); + spin_unlock_irqrestore(&port->lock, flags); /* * Disable break condition and FIFOs @@ -2202,7 +2206,7 @@ static void serial8250_shutdown(struct uart_port *port) del_timer_sync(&up->timer); up->timer.function = serial8250_timeout; - if (up->port.irq) + if (port->irq) serial_unlink_irq_chain(up); } @@ -2277,11 +2281,11 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, if (up->bugs & UART_BUG_QUOT && (quot & 0xff) == 0) quot++; - if (up->capabilities & UART_CAP_FIFO && up->port.fifosize > 1) { + if (up->capabilities & UART_CAP_FIFO && port->fifosize > 1) { if (baud < 2400) fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1; else - fcr = uart_config[up->port.type].fcr; + fcr = uart_config[port->type].fcr; } /* @@ -2292,7 +2296,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, * have sufficient FIFO entries for the latency of the remote * UART to respond. IOW, at least 32 bytes of FIFO. */ - if (up->capabilities & UART_CAP_AFE && up->port.fifosize >= 32) { + if (up->capabilities & UART_CAP_AFE && port->fifosize >= 32) { up->mcr &= ~UART_MCR_AFE; if (termios->c_cflag & CRTSCTS) up->mcr |= UART_MCR_AFE; @@ -2302,40 +2306,40 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, * Ok, we're now changing the port state. Do it with * interrupts disabled. */ - spin_lock_irqsave(&up->port.lock, flags); + spin_lock_irqsave(&port->lock, flags); /* * Update the per-port timeout. */ uart_update_timeout(port, termios->c_cflag, baud); - up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + port->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; if (termios->c_iflag & INPCK) - up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + port->read_status_mask |= UART_LSR_FE | UART_LSR_PE; if (termios->c_iflag & (BRKINT | PARMRK)) - up->port.read_status_mask |= UART_LSR_BI; + port->read_status_mask |= UART_LSR_BI; /* * Characteres to ignore */ - up->port.ignore_status_mask = 0; + port->ignore_status_mask = 0; if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + port->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; if (termios->c_iflag & IGNBRK) { - up->port.ignore_status_mask |= UART_LSR_BI; + port->ignore_status_mask |= UART_LSR_BI; /* * If we're ignoring parity and break indicators, * ignore overruns too (for real raw support). */ if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_OE; + port->ignore_status_mask |= UART_LSR_OE; } /* * ignore all characters if CREAD is not set */ if ((termios->c_cflag & CREAD) == 0) - up->port.ignore_status_mask |= UART_LSR_DR; + port->ignore_status_mask |= UART_LSR_DR; /* * CTS flow control flag and modem status interrupts @@ -2362,7 +2366,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, efr |= UART_EFR_CTS; serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - if (up->port.flags & UPF_EXAR_EFR) + if (port->flags & UPF_EXAR_EFR) serial_out(up, UART_XR_EFR, efr); else serial_out(up, UART_EFR, efr); @@ -2392,20 +2396,20 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR * is written without DLAB set, this mode will be disabled. */ - if (up->port.type == PORT_16750) + if (port->type == PORT_16750) serial_out(up, UART_FCR, fcr); serial_out(up, UART_LCR, cval); /* reset DLAB */ up->lcr = cval; /* Save LCR */ - if (up->port.type != PORT_16750) { + if (port->type != PORT_16750) { if (fcr & UART_FCR_ENABLE_FIFO) { /* emulated UARTs (Lucent Venus 167x) need two steps */ serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); } serial_out(up, UART_FCR, fcr); /* set fcr */ } - serial8250_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); + serial8250_set_mctrl(port, port->mctrl); + spin_unlock_irqrestore(&port->lock, flags); /* Don't rewrite B0 */ if (tty_termios_baud_rate(termios)) tty_termios_encode_baud_rate(termios, baud, baud); @@ -2470,26 +2474,26 @@ static unsigned int serial8250_port_size(struct uart_8250_port *pt) static int serial8250_request_std_resource(struct uart_8250_port *up) { unsigned int size = serial8250_port_size(up); + struct uart_port *port = &up->port; int ret = 0; - switch (up->port.iotype) { + switch (port->iotype) { case UPIO_AU: case UPIO_TSI: case UPIO_MEM32: case UPIO_MEM: - if (!up->port.mapbase) + if (!port->mapbase) break; - if (!request_mem_region(up->port.mapbase, size, "serial")) { + if (!request_mem_region(port->mapbase, size, "serial")) { ret = -EBUSY; break; } - if (up->port.flags & UPF_IOREMAP) { - up->port.membase = ioremap_nocache(up->port.mapbase, - size); - if (!up->port.membase) { - release_mem_region(up->port.mapbase, size); + if (port->flags & UPF_IOREMAP) { + port->membase = ioremap_nocache(port->mapbase, size); + if (!port->membase) { + release_mem_region(port->mapbase, size); ret = -ENOMEM; } } @@ -2497,7 +2501,7 @@ static int serial8250_request_std_resource(struct uart_8250_port *up) case UPIO_HUB6: case UPIO_PORT: - if (!request_region(up->port.iobase, size, "serial")) + if (!request_region(port->iobase, size, "serial")) ret = -EBUSY; break; } @@ -2507,26 +2511,27 @@ static int serial8250_request_std_resource(struct uart_8250_port *up) static void serial8250_release_std_resource(struct uart_8250_port *up) { unsigned int size = serial8250_port_size(up); + struct uart_port *port = &up->port; - switch (up->port.iotype) { + switch (port->iotype) { case UPIO_AU: case UPIO_TSI: case UPIO_MEM32: case UPIO_MEM: - if (!up->port.mapbase) + if (!port->mapbase) break; - if (up->port.flags & UPF_IOREMAP) { - iounmap(up->port.membase); - up->port.membase = NULL; + if (port->flags & UPF_IOREMAP) { + iounmap(port->membase); + port->membase = NULL; } - release_mem_region(up->port.mapbase, size); + release_mem_region(port->mapbase, size); break; case UPIO_HUB6: case UPIO_PORT: - release_region(up->port.iobase, size); + release_region(port->iobase, size); break; } } @@ -2535,12 +2540,13 @@ static int serial8250_request_rsa_resource(struct uart_8250_port *up) { unsigned long start = UART_RSA_BASE << up->port.regshift; unsigned int size = 8 << up->port.regshift; + struct uart_port *port = &up->port; int ret = -EINVAL; - switch (up->port.iotype) { + switch (port->iotype) { case UPIO_HUB6: case UPIO_PORT: - start += up->port.iobase; + start += port->iobase; if (request_region(start, size, "serial-rsa")) ret = 0; else @@ -2555,11 +2561,12 @@ static void serial8250_release_rsa_resource(struct uart_8250_port *up) { unsigned long offset = UART_RSA_BASE << up->port.regshift; unsigned int size = 8 << up->port.regshift; + struct uart_port *port = &up->port; - switch (up->port.iotype) { + switch (port->iotype) { case UPIO_HUB6: case UPIO_PORT: - release_region(up->port.iobase + offset, size); + release_region(port->iobase + offset, size); break; } } @@ -2570,7 +2577,7 @@ static void serial8250_release_port(struct uart_port *port) container_of(port, struct uart_8250_port, port); serial8250_release_std_resource(up); - if (up->port.type == PORT_RSA) + if (port->type == PORT_RSA) serial8250_release_rsa_resource(up); } @@ -2581,7 +2588,7 @@ static int serial8250_request_port(struct uart_port *port) int ret = 0; ret = serial8250_request_std_resource(up); - if (ret == 0 && up->port.type == PORT_RSA) { + if (ret == 0 && port->type == PORT_RSA) { ret = serial8250_request_rsa_resource(up); if (ret < 0) serial8250_release_std_resource(up); @@ -2609,22 +2616,22 @@ static void serial8250_config_port(struct uart_port *port, int flags) if (ret < 0) probeflags &= ~PROBE_RSA; - if (up->port.iotype != up->cur_iotype) + if (port->iotype != up->cur_iotype) set_io_from_upio(port); if (flags & UART_CONFIG_TYPE) autoconfig(up, probeflags); /* if access method is AU, it is a 16550 with a quirk */ - if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU) + if (port->type == PORT_16550A && port->iotype == UPIO_AU) up->bugs |= UART_BUG_NOMSR; - if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ) + if (port->type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ) autoconfig_irq(up); - if (up->port.type != PORT_RSA && probeflags & PROBE_RSA) + if (port->type != PORT_RSA && probeflags & PROBE_RSA) serial8250_release_rsa_resource(up); - if (up->port.type == PORT_UNKNOWN) + if (port->type == PORT_UNKNOWN) serial8250_release_std_resource(up); } @@ -2698,9 +2705,10 @@ static void __init serial8250_isa_init_ports(void) for (i = 0; i < nr_uarts; i++) { struct uart_8250_port *up = &serial8250_ports[i]; + struct uart_port *port = &up->port; - up->port.line = i; - spin_lock_init(&up->port.lock); + port->line = i; + spin_lock_init(&port->lock); init_timer(&up->timer); up->timer.function = serial8250_timeout; @@ -2711,7 +2719,7 @@ static void __init serial8250_isa_init_ports(void) up->mcr_mask = ~ALPHA_KLUDGE_MCR; up->mcr_force = ALPHA_KLUDGE_MCR; - up->port.ops = &serial8250_pops; + port->ops = &serial8250_pops; } if (share_irqs) @@ -2720,17 +2728,19 @@ static void __init serial8250_isa_init_ports(void) for (i = 0, up = serial8250_ports; i < ARRAY_SIZE(old_serial_port) && i < nr_uarts; i++, up++) { - up->port.iobase = old_serial_port[i].port; - up->port.irq = irq_canonicalize(old_serial_port[i].irq); - up->port.irqflags = old_serial_port[i].irqflags; - up->port.uartclk = old_serial_port[i].baud_base * 16; - up->port.flags = old_serial_port[i].flags; - up->port.hub6 = old_serial_port[i].hub6; - up->port.membase = old_serial_port[i].iomem_base; - up->port.iotype = old_serial_port[i].io_type; - up->port.regshift = old_serial_port[i].iomem_reg_shift; - set_io_from_upio(&up->port); - up->port.irqflags |= irqflag; + struct uart_port *port = &up->port; + + port->iobase = old_serial_port[i].port; + port->irq = irq_canonicalize(old_serial_port[i].irq); + port->irqflags = old_serial_port[i].irqflags; + port->uartclk = old_serial_port[i].baud_base * 16; + port->flags = old_serial_port[i].flags; + port->hub6 = old_serial_port[i].hub6; + port->membase = old_serial_port[i].iomem_base; + port->iotype = old_serial_port[i].io_type; + port->regshift = old_serial_port[i].iomem_reg_shift; + set_io_from_upio(port); + port->irqflags |= irqflag; if (serial8250_isa_config != NULL) serial8250_isa_config(i, &up->port, &up->capabilities); @@ -2791,6 +2801,7 @@ static void serial8250_console_write(struct console *co, const char *s, unsigned int count) { struct uart_8250_port *up = &serial8250_ports[co->index]; + struct uart_port *port = &up->port; unsigned long flags; unsigned int ier; int locked = 1; @@ -2798,13 +2809,13 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) touch_nmi_watchdog(); local_irq_save(flags); - if (up->port.sysrq) { + if (port->sysrq) { /* serial8250_handle_irq() already took the lock */ locked = 0; } else if (oops_in_progress) { - locked = spin_trylock(&up->port.lock); + locked = spin_trylock(&port->lock); } else - spin_lock(&up->port.lock); + spin_lock(&port->lock); /* * First save the IER then disable the interrupts @@ -2816,7 +2827,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) else serial_out(up, UART_IER, 0); - uart_console_write(&up->port, s, count, serial8250_console_putchar); + uart_console_write(port, s, count, serial8250_console_putchar); /* * Finally, wait for transmitter to become empty @@ -2836,7 +2847,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) serial8250_modem_status(up); if (locked) - spin_unlock(&up->port.lock); + spin_unlock(&port->lock); local_irq_restore(flags); } @@ -2981,6 +2992,7 @@ void serial8250_suspend_port(int line) void serial8250_resume_port(int line) { struct uart_8250_port *up = &serial8250_ports[line]; + struct uart_port *port = &up->port; if (up->capabilities & UART_NATSEMI) { /* Ensure it's still in high speed mode */ @@ -2989,9 +3001,9 @@ void serial8250_resume_port(int line) ns16550a_goto_highspeed(up); serial_out(up, UART_LCR, 0); - up->port.uartclk = 921600*16; + port->uartclk = 921600*16; } - uart_resume_port(&serial8250_reg, &up->port); + uart_resume_port(&serial8250_reg, port); } /*