From e20903165f0f11827657e0c5d3bfbfdaed13207b Mon Sep 17 00:00:00 2001 From: David Schleef Date: Thu, 19 Feb 2009 09:47:26 -0800 Subject: [PATCH] Staging: comedi: add ni_pcidio driver Driver for National Instruments PCI-DIO-96/PCI-6508, PCI-DIO-32HS, and PCI-6503 cards. From: David Schleef Cc: Ian Abbott Cc: Frank Mori Hess Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/ni_pcidio.c | 1300 ++++++++++++++++++++ 1 file changed, 1300 insertions(+) create mode 100644 drivers/staging/comedi/drivers/ni_pcidio.c diff --git a/drivers/staging/comedi/drivers/ni_pcidio.c b/drivers/staging/comedi/drivers/ni_pcidio.c new file mode 100644 index 000000000000..a3e12212e427 --- /dev/null +++ b/drivers/staging/comedi/drivers/ni_pcidio.c @@ -0,0 +1,1300 @@ +/* + comedi/drivers/ni_pcidio.c + driver for National Instruments PCI-DIO-96/PCI-6508 + National Instruments PCI-DIO-32HS + National Instruments PCI-6503 + + COMEDI - Linux Control and Measurement Device Interface + Copyright (C) 1999,2002 David A. Schleef + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ +/* +Driver: ni_pcidio +Description: National Instruments PCI-DIO32HS, PCI-DIO96, PCI-6533, PCI-6503 +Author: ds +Status: works +Devices: [National Instruments] PCI-DIO-32HS (ni_pcidio), PXI-6533, + PCI-DIO-96, PCI-DIO-96B, PXI-6508, PCI-6503, PCI-6503B, PCI-6503X, + PXI-6503, PCI-6533, PCI-6534 +Updated: Sun, 21 Apr 2002 21:03:38 -0700 + +The DIO-96 appears as four 8255 subdevices. See the 8255 +driver notes for details. + +The DIO32HS board appears as one subdevice, with 32 channels. +Each channel is individually I/O configurable. The channel order +is 0=A0, 1=A1, 2=A2, ... 8=B0, 16=C0, 24=D0. The driver only +supports simple digital I/O; no handshaking is supported. + +DMA mostly works for the PCI-DIO32HS, but only in timed input mode. + +This driver could be easily modified to support AT-MIO32HS and +AT-MIO96. + +The PCI-6534 requires a firmware upload after power-up to work, the +firmware data and instructions for loading it with comedi_config +it are contained in the +comedi_nonfree_firmware tarball available from http://www.comedi.org +*/ + +/* + This driver is for both the NI PCI-DIO-32HS and the PCI-DIO-96, + which have very different architectures. But, since the '96 is + so simple, it is included here. + + Manuals (available from ftp://ftp.natinst.com/support/manuals) + + 320938c.pdf PCI-DIO-96/PXI-6508/PCI-6503 User Manual + 321464b.pdf AT/PCI-DIO-32HS User Manual + 341329A.pdf PCI-6533 Register-Level Programmer Manual + 341330A.pdf DAQ-DIO Technical Reference Manual + + */ + +#define USE_DMA +//#define DEBUG 1 +//#define DEBUG_FLAGS + +#include "../comedidev.h" + +#include "mite.h" +#include "8255.h" + +#undef DPRINTK +#ifdef DEBUG +#define DPRINTK(format, args...) printk(format, ## args) +#else +#define DPRINTK(format, args...) +#endif + +#define PCI_VENDOR_ID_NATINST 0x1093 + +#define PCI_DIO_SIZE 4096 +#define PCI_MITE_SIZE 4096 + +/* defines for the PCI-DIO-96 */ + +#define NIDIO_8255_BASE(x) ((x)*4) +#define NIDIO_A 0 +#define NIDIO_B 4 +#define NIDIO_C 8 +#define NIDIO_D 12 + +/* defines for the PCI-DIO-32HS */ + +#define Window_Address 4 /* W */ +#define Interrupt_And_Window_Status 4 /* R */ +#define IntStatus1 (1<<0) +#define IntStatus2 (1<<1) +#define WindowAddressStatus_mask 0x7c + +#define Master_DMA_And_Interrupt_Control 5 /* W */ +#define InterruptLine(x) ((x)&3) +#define OpenInt (1<<2) +#define Group_Status 5 /* R */ +#define DataLeft (1<<0) +#define Req (1<<2) +#define StopTrig (1<<3) + +#define Group_1_Flags 6 /* R */ +#define Group_2_Flags 7 /* R */ +#define TransferReady (1<<0) +#define CountExpired (1<<1) +#define Waited (1<<5) +#define PrimaryTC (1<<6) +#define SecondaryTC (1<<7) + //#define SerialRose + //#define ReqRose + //#define Paused + +#define Group_1_First_Clear 6 /* W */ +#define Group_2_First_Clear 7 /* W */ +#define ClearWaited (1<<3) +#define ClearPrimaryTC (1<<4) +#define ClearSecondaryTC (1<<5) +#define DMAReset (1<<6) +#define FIFOReset (1<<7) +#define ClearAll 0xf8 + +#define Group_1_FIFO 8 /* W */ +#define Group_2_FIFO 12 /* W */ + +#define Transfer_Count 20 +#define Chip_ID_D 24 +#define Chip_ID_I 25 +#define Chip_ID_O 26 +#define Chip_Version 27 +#define Port_IO(x) (28+(x)) +#define Port_Pin_Directions(x) (32+(x)) +#define Port_Pin_Mask(x) (36+(x)) +#define Port_Pin_Polarities(x) (40+(x)) + +#define Master_Clock_Routing 45 +#define RTSIClocking(x) (((x)&3)<<4) + +#define Group_1_Second_Clear 46 /* W */ +#define Group_2_Second_Clear 47 /* W */ +#define ClearExpired (1<<0) + +#define Port_Pattern(x) (48+(x)) + +#define Data_Path 64 +#define FIFOEnableA (1<<0) +#define FIFOEnableB (1<<1) +#define FIFOEnableC (1<<2) +#define FIFOEnableD (1<<3) +#define Funneling(x) (((x)&3)<<4) +#define GroupDirection (1<<7) + +#define Protocol_Register_1 65 +#define OpMode Protocol_Register_1 +#define RunMode(x) ((x)&7) +#define Numbered (1<<3) + +#define Protocol_Register_2 66 +#define ClockReg Protocol_Register_2 +#define ClockLine(x) (((x)&3)<<5) +#define InvertStopTrig (1<<7) +#define DataLatching(x) (((x)&3)<<5) + +#define Protocol_Register_3 67 +#define Sequence Protocol_Register_3 + +#define Protocol_Register_14 68 /* 16 bit */ +#define ClockSpeed Protocol_Register_14 + +#define Protocol_Register_4 70 +#define ReqReg Protocol_Register_4 +#define ReqConditioning(x) (((x)&7)<<3) + +#define Protocol_Register_5 71 +#define BlockMode Protocol_Register_5 + +#define FIFO_Control 72 +#define ReadyLevel(x) ((x)&7) + +#define Protocol_Register_6 73 +#define LinePolarities Protocol_Register_6 +#define InvertAck (1<<0) +#define InvertReq (1<<1) +#define InvertClock (1<<2) +#define InvertSerial (1<<3) +#define OpenAck (1<<4) +#define OpenClock (1<<5) + +#define Protocol_Register_7 74 +#define AckSer Protocol_Register_7 +#define AckLine(x) (((x)&3)<<2) +#define ExchangePins (1<<7) + +#define Interrupt_Control 75 + /* bits same as flags */ + +#define DMA_Line_Control_Group1 76 +#define DMA_Line_Control_Group2 108 +// channel zero is none +static inline unsigned primary_DMAChannel_bits(unsigned channel) +{ + return channel & 0x3; +} +static inline unsigned secondary_DMAChannel_bits(unsigned channel) +{ + return (channel << 2) & 0xc; +} + +#define Transfer_Size_Control 77 +#define TransferWidth(x) ((x)&3) +#define TransferLength(x) (((x)&3)<<3) +#define RequireRLevel (1<<5) + +#define Protocol_Register_15 79 +#define DAQOptions Protocol_Register_15 +#define StartSource(x) ((x)&0x3) +#define InvertStart (1<<2) +#define StopSource(x) (((x)&0x3)<<3) +#define ReqStart (1<<6) +#define PreStart (1<<7) + +#define Pattern_Detection 81 +#define DetectionMethod (1<<0) +#define InvertMatch (1<<1) +#define IE_Pattern_Detection (1<<2) + +#define Protocol_Register_9 82 +#define ReqDelay Protocol_Register_9 + +#define Protocol_Register_10 83 +#define ReqNotDelay Protocol_Register_10 + +#define Protocol_Register_11 84 +#define AckDelay Protocol_Register_11 + +#define Protocol_Register_12 85 +#define AckNotDelay Protocol_Register_12 + +#define Protocol_Register_13 86 +#define Data1Delay Protocol_Register_13 + +#define Protocol_Register_8 88 /* 32 bit */ +#define StartDelay Protocol_Register_8 + +enum pci_6534_firmware_registers { /* 16 bit */ + Firmware_Control_Register = 0x100, + Firmware_Status_Register = 0x104, + Firmware_Data_Register = 0x108, + Firmware_Mask_Register = 0x10c, + Firmware_Debug_Register = 0x110, +}; +/* main fpga registers (32 bit)*/ +enum pci_6534_fpga_registers { + FPGA_Control1_Register = 0x200, + FPGA_Control2_Register = 0x204, + FPGA_Irq_Mask_Register = 0x208, + FPGA_Status_Register = 0x20c, + FPGA_Signature_Register = 0x210, + FPGA_SCALS_Counter_Register = 0x280, /*write-clear */ + FPGA_SCAMS_Counter_Register = 0x284, /*write-clear */ + FPGA_SCBLS_Counter_Register = 0x288, /*write-clear */ + FPGA_SCBMS_Counter_Register = 0x28c, /*write-clear */ + FPGA_Temp_Control_Register = 0x2a0, + FPGA_DAR_Register = 0x2a8, + FPGA_ELC_Read_Register = 0x2b8, + FPGA_ELC_Write_Register = 0x2bc, +}; +enum FPGA_Control_Bits { + FPGA_Enable_Bit = 0x8000, +}; + +#define TIMER_BASE 50 /* nanoseconds */ + +#ifdef USE_DMA +#define IntEn (CountExpired|Waited|PrimaryTC|SecondaryTC) +#else +#define IntEn (TransferReady|CountExpired|Waited|PrimaryTC|SecondaryTC) +#endif + +static int nidio_attach(comedi_device * dev, comedi_devconfig * it); +static int nidio_detach(comedi_device * dev); +static int ni_pcidio_cancel(comedi_device * dev, comedi_subdevice * s); + +static comedi_driver driver_pcidio = { + driver_name:"ni_pcidio", + module:THIS_MODULE, + attach:nidio_attach, + detach:nidio_detach, +}; + +typedef struct { + int dev_id; + const char *name; + int n_8255; + unsigned int is_diodaq:1; + unsigned int uses_firmware:1; +} nidio_board; +static const nidio_board nidio_boards[] = { + { + dev_id: 0x1150, + name: "pci-dio-32hs", + n_8255: 0, + is_diodaq:1, + }, + { + dev_id: 0x1320, + name: "pxi-6533", + n_8255: 0, + is_diodaq:1, + }, + { + dev_id: 0x12b0, + name: "pci-6534", + n_8255: 0, + is_diodaq:1, + uses_firmware:1, + }, + { + dev_id: 0x0160, + name: "pci-dio-96", + n_8255: 4, + is_diodaq:0, + }, + { + dev_id: 0x1630, + name: "pci-dio-96b", + n_8255: 4, + is_diodaq:0, + }, + { + dev_id: 0x13c0, + name: "pxi-6508", + n_8255: 4, + is_diodaq:0, + }, + { + dev_id: 0x0400, + name: "pci-6503", + n_8255: 1, + is_diodaq:0, + }, + { + dev_id: 0x1250, + name: "pci-6503b", + n_8255: 1, + is_diodaq:0, + }, + { + dev_id: 0x17d0, + name: "pci-6503x", + n_8255: 1, + is_diodaq:0, + }, + { + dev_id: 0x1800, + name: "pxi-6503", + n_8255: 1, + is_diodaq:0, + }, +}; + +#define n_nidio_boards (sizeof(nidio_boards)/sizeof(nidio_boards[0])) +#define this_board ((const nidio_board *)dev->board_ptr) + +static DEFINE_PCI_DEVICE_TABLE(ni_pcidio_pci_table) = { + {PCI_VENDOR_ID_NATINST, 0x1150, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_NATINST, 0x1320, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_NATINST, 0x12b0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_NATINST, 0x0160, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_NATINST, 0x1630, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_NATINST, 0x13c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_NATINST, 0x0400, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_NATINST, 0x1250, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_NATINST, 0x17d0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_NATINST, 0x1800, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0} +}; + +MODULE_DEVICE_TABLE(pci, ni_pcidio_pci_table); + +typedef struct { + struct mite_struct *mite; + int boardtype; + int dio; + unsigned short OpModeBits; + struct mite_channel *di_mite_chan; + struct mite_dma_descriptor_ring *di_mite_ring; + spinlock_t mite_channel_lock; +} nidio96_private; +#define devpriv ((nidio96_private *)dev->private) + +static int ni_pcidio_cmdtest(comedi_device * dev, comedi_subdevice * s, + comedi_cmd * cmd); +static int ni_pcidio_cmd(comedi_device * dev, comedi_subdevice * s); +static int ni_pcidio_inttrig(comedi_device * dev, comedi_subdevice * s, + unsigned int trignum); +static int nidio_find_device(comedi_device * dev, int bus, int slot); +static int ni_pcidio_ns_to_timer(int *nanosec, int round_mode); +static int setup_mite_dma(comedi_device * dev, comedi_subdevice * s); + +#ifdef DEBUG_FLAGS +static void ni_pcidio_print_flags(unsigned int flags); +static void ni_pcidio_print_status(unsigned int status); +#else +#define ni_pcidio_print_flags(x) +#define ni_pcidio_print_status(x) +#endif + +static int ni_pcidio_request_di_mite_channel(comedi_device * dev) +{ + unsigned long flags; + + comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags); + BUG_ON(devpriv->di_mite_chan); + devpriv->di_mite_chan = + mite_request_channel_in_range(devpriv->mite, + devpriv->di_mite_ring, 1, 2); + if (devpriv->di_mite_chan == NULL) { + comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, + flags); + comedi_error(dev, "failed to reserve mite dma channel."); + return -EBUSY; + } + writeb(primary_DMAChannel_bits(devpriv->di_mite_chan->channel) | + secondary_DMAChannel_bits(devpriv->di_mite_chan->channel), + devpriv->mite->daq_io_addr + DMA_Line_Control_Group1); + mmiowb(); + comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags); + return 0; +} + +static void ni_pcidio_release_di_mite_channel(comedi_device * dev) +{ + unsigned long flags; + + comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags); + if (devpriv->di_mite_chan) { + mite_dma_disarm(devpriv->di_mite_chan); + mite_dma_reset(devpriv->di_mite_chan); + mite_release_channel(devpriv->di_mite_chan); + devpriv->di_mite_chan = NULL; + writeb(primary_DMAChannel_bits(0) | + secondary_DMAChannel_bits(0), + devpriv->mite->daq_io_addr + DMA_Line_Control_Group1); + mmiowb(); + } + comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags); +} + +static int nidio96_8255_cb(int dir, int port, int data, unsigned long iobase) +{ + if (dir) { + writeb(data, (void *)(iobase + port)); + return 0; + } else { + return readb((void *)(iobase + port)); + } +} + +void ni_pcidio_event(comedi_device * dev, comedi_subdevice * s) +{ + if (s->async-> + events & (COMEDI_CB_EOA | COMEDI_CB_ERROR | COMEDI_CB_OVERFLOW)) + { + ni_pcidio_cancel(dev, s); + } + comedi_event(dev, s); +} + +static irqreturn_t nidio_interrupt(int irq, void *d PT_REGS_ARG) +{ + comedi_device *dev = d; + comedi_subdevice *s = dev->subdevices; + comedi_async *async = s->async; + struct mite_struct *mite = devpriv->mite; + + //int i, j; + long int AuxData = 0; + sampl_t data1 = 0; + sampl_t data2 = 0; + int flags; + int status; + int work = 0; + unsigned int m_status = 0; + unsigned long irq_flags; + + //interrupcions parasites + if (dev->attached == 0) { + // assume it's from another card + return IRQ_NONE; + } + + status = readb(devpriv->mite->daq_io_addr + + Interrupt_And_Window_Status); + flags = readb(devpriv->mite->daq_io_addr + Group_1_Flags); + + DPRINTK("ni_pcidio_interrupt: status=0x%02x,flags=0x%02x\n", + status, flags); + ni_pcidio_print_flags(flags); + ni_pcidio_print_status(status); + + //printk("buf[0]=%08x\n",*(unsigned int *)async->prealloc_buf); + //printk("buf[4096]=%08x\n",*(unsigned int *)(async->prealloc_buf+4096)); + + comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, irq_flags); + if (devpriv->di_mite_chan) + m_status = mite_get_status(devpriv->di_mite_chan); +#ifdef MITE_DEBUG + mite_print_chsr(m_status); +#endif + //printk("mite_bytes_transferred: %d\n",mite_bytes_transferred(mite,DI_DMA_CHAN)); + //mite_dump_regs(mite); + if (m_status & CHSR_INT) { + if (m_status & CHSR_LINKC) { + writel(CHOR_CLRLC, + mite->mite_io_addr + + MITE_CHOR(devpriv->di_mite_chan->channel)); + mite_sync_input_dma(devpriv->di_mite_chan, s->async); + /* XXX need to byteswap */ + } + if (m_status & ~(CHSR_INT | CHSR_LINKC | CHSR_DONE | CHSR_DRDY | + CHSR_DRQ1 | CHSR_MRDY)) { + DPRINTK("unknown mite interrupt, disabling IRQ\n"); + async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR; + disable_irq(dev->irq); + } + } + comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, irq_flags); + + while (status & DataLeft) { + work++; + if (work > 20) { + DPRINTK("too much work in interrupt\n"); + writeb(0x00, + devpriv->mite->daq_io_addr + + Master_DMA_And_Interrupt_Control); + break; + } + + flags &= IntEn; + + if (flags & TransferReady) { + //DPRINTK("TransferReady\n"); + while (flags & TransferReady) { + work++; + if (work > 100) { + DPRINTK("too much work in interrupt\n"); + writeb(0x00, + devpriv->mite->daq_io_addr + + Master_DMA_And_Interrupt_Control); + goto out; + } + AuxData = + readl(devpriv->mite->daq_io_addr + + Group_1_FIFO); + data1 = AuxData & 0xffff; + data2 = (AuxData & 0xffff0000) >> 16; + comedi_buf_put(async, data1); + comedi_buf_put(async, data2); + //DPRINTK("read:%d, %d\n",data1,data2); + flags = readb(devpriv->mite->daq_io_addr + + Group_1_Flags); + } + //DPRINTK("buf_int_count: %d\n",async->buf_int_count); + //DPRINTK("1) IntEn=%d,flags=%d,status=%d\n",IntEn,flags,status); + //ni_pcidio_print_flags(flags); + //ni_pcidio_print_status(status); + async->events |= COMEDI_CB_BLOCK; + } + + if (flags & CountExpired) { + DPRINTK("CountExpired\n"); + writeb(ClearExpired, + devpriv->mite->daq_io_addr + + Group_1_Second_Clear); + async->events |= COMEDI_CB_EOA; + + writeb(0x00, devpriv->mite->daq_io_addr + OpMode); + break; + } else if (flags & Waited) { + DPRINTK("Waited\n"); + writeb(ClearWaited, + devpriv->mite->daq_io_addr + + Group_1_First_Clear); + async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR; + break; + } else if (flags & PrimaryTC) { + DPRINTK("PrimaryTC\n"); + writeb(ClearPrimaryTC, + devpriv->mite->daq_io_addr + + Group_1_First_Clear); + async->events |= COMEDI_CB_EOA; + } else if (flags & SecondaryTC) { + DPRINTK("SecondaryTC\n"); + writeb(ClearSecondaryTC, + devpriv->mite->daq_io_addr + + Group_1_First_Clear); + async->events |= COMEDI_CB_EOA; + } +#if 0 + else { + printk("ni_pcidio: unknown interrupt\n"); + async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA; + writeb(0x00, + devpriv->mite->daq_io_addr + + Master_DMA_And_Interrupt_Control); + } +#endif + flags = readb(devpriv->mite->daq_io_addr + Group_1_Flags); + status = readb(devpriv->mite->daq_io_addr + + Interrupt_And_Window_Status); + //DPRINTK("loop end: IntEn=0x%02x,flags=0x%02x,status=0x%02x\n", + // IntEn,flags,status); + //ni_pcidio_print_flags(flags); + //ni_pcidio_print_status(status); + } + + out: + ni_pcidio_event(dev, s); +#if 0 + if (!tag) { + writeb(0x03, + devpriv->mite->daq_io_addr + + Master_DMA_And_Interrupt_Control); + } +#endif + return IRQ_HANDLED; +} + +#ifdef DEBUG_FLAGS +static const char *const flags_strings[] = { + "TransferReady", "CountExpired", "2", "3", + "4", "Waited", "PrimaryTC", "SecondaryTC", +}; +static void ni_pcidio_print_flags(unsigned int flags) +{ + int i; + + printk("group_1_flags:"); + for (i = 7; i >= 0; i--) { + if (flags & (1 << i)) { + printk(" %s", flags_strings[i]); + } + } + printk("\n"); +} +static char *status_strings[] = { + "DataLeft1", "Reserved1", "Req1", "StopTrig1", + "DataLeft2", "Reserved2", "Req2", "StopTrig2", +}; +static void ni_pcidio_print_status(unsigned int flags) +{ + int i; + + printk("group_status:"); + for (i = 7; i >= 0; i--) { + if (flags & (1 << i)) { + printk(" %s", status_strings[i]); + } + } + printk("\n"); +} +#endif + +#ifdef unused +static void debug_int(comedi_device * dev) +{ + int a, b; + static int n_int = 0; + struct timeval tv; + + do_gettimeofday(&tv); + a = readb(devpriv->mite->daq_io_addr + Group_Status); + b = readb(devpriv->mite->daq_io_addr + Group_1_Flags); + + if (n_int < 10) { + DPRINTK("status 0x%02x flags 0x%02x time %06d\n", a, b, + (int)tv.tv_usec); + } + + while (b & 1) { + writew(0xff, devpriv->mite->daq_io_addr + Group_1_FIFO); + b = readb(devpriv->mite->daq_io_addr + Group_1_Flags); + } + + b = readb(devpriv->mite->daq_io_addr + Group_1_Flags); + + if (n_int < 10) { + DPRINTK("new status 0x%02x\n", b); + n_int++; + } +} +#endif + +static int ni_pcidio_insn_config(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + if (insn->n != 1) + return -EINVAL; + switch (data[0]) { + case INSN_CONFIG_DIO_OUTPUT: + s->io_bits |= 1 << CR_CHAN(insn->chanspec); + break; + case INSN_CONFIG_DIO_INPUT: + s->io_bits &= ~(1 << CR_CHAN(insn->chanspec)); + break; + case INSN_CONFIG_DIO_QUERY: + data[1] = + (s->io_bits & (1 << CR_CHAN(insn-> + chanspec))) ? COMEDI_OUTPUT : + COMEDI_INPUT; + return insn->n; + break; + default: + return -EINVAL; + } + writel(s->io_bits, devpriv->mite->daq_io_addr + Port_Pin_Directions(0)); + + return 1; +} + +static int ni_pcidio_insn_bits(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + if (insn->n != 2) + return -EINVAL; + if (data[0]) { + s->state &= ~data[0]; + s->state |= (data[0] & data[1]); + writel(s->state, devpriv->mite->daq_io_addr + Port_IO(0)); + } + data[1] = readl(devpriv->mite->daq_io_addr + Port_IO(0)); + + return 2; +} + +static int ni_pcidio_cmdtest(comedi_device * dev, comedi_subdevice * s, + comedi_cmd * cmd) +{ + int err = 0; + int tmp; + + /* step 1: make sure trigger sources are trivially valid */ + + tmp = cmd->start_src; + cmd->start_src &= TRIG_NOW | TRIG_INT; + if (!cmd->start_src || tmp != cmd->start_src) + err++; + + tmp = cmd->scan_begin_src; + cmd->scan_begin_src &= TRIG_TIMER | TRIG_EXT; + if (!cmd->scan_begin_src || tmp != cmd->scan_begin_src) + err++; + + tmp = cmd->convert_src; + cmd->convert_src &= TRIG_NOW; + if (!cmd->convert_src || tmp != cmd->convert_src) + err++; + + tmp = cmd->scan_end_src; + cmd->scan_end_src &= TRIG_COUNT; + if (!cmd->scan_end_src || tmp != cmd->scan_end_src) + err++; + + tmp = cmd->stop_src; + cmd->stop_src &= TRIG_COUNT | TRIG_NONE; + if (!cmd->stop_src || tmp != cmd->stop_src) + err++; + + if (err) + return 1; + + /* step 2: make sure trigger sources are unique and mutually compatible */ + + /* note that mutual compatiblity is not an issue here */ + if (cmd->start_src != TRIG_NOW && cmd->start_src != TRIG_INT) + err++; + if (cmd->scan_begin_src != TRIG_TIMER && + cmd->scan_begin_src != TRIG_EXT) + err++; + + if (err) + return 2; + + /* step 3: make sure arguments are trivially compatible */ + + if (cmd->start_arg != 0) { + /* same for both TRIG_INT and TRIG_NOW */ + cmd->start_arg = 0; + err++; + } +#define MAX_SPEED (TIMER_BASE) /* in nanoseconds */ + + if (cmd->scan_begin_src == TRIG_TIMER) { + if (cmd->scan_begin_arg < MAX_SPEED) { + cmd->scan_begin_arg = MAX_SPEED; + err++; + } + /* no minumum speed */ + } else { + /* TRIG_EXT */ + /* should be level/edge, hi/lo specification here */ + if (cmd->scan_begin_arg != 0) { + cmd->scan_begin_arg = 0; + err++; + } + } + if (cmd->convert_arg != 0) { + cmd->convert_arg = 0; + err++; + } + + if (cmd->scan_end_arg != cmd->chanlist_len) { + cmd->scan_end_arg = cmd->chanlist_len; + err++; + } + if (cmd->stop_src == TRIG_COUNT) { + /* no limit */ + } else { + /* TRIG_NONE */ + if (cmd->stop_arg != 0) { + cmd->stop_arg = 0; + err++; + } + } + + if (err) + return 3; + + /* step 4: fix up any arguments */ + + if (cmd->scan_begin_src == TRIG_TIMER) { + tmp = cmd->scan_begin_arg; + ni_pcidio_ns_to_timer(&cmd->scan_begin_arg, + cmd->flags & TRIG_ROUND_MASK); + if (tmp != cmd->scan_begin_arg) + err++; + } + + if (err) + return 4; + + return 0; +} + +static int ni_pcidio_ns_to_timer(int *nanosec, int round_mode) +{ + int divider, base; + + base = TIMER_BASE; + + switch (round_mode) { + case TRIG_ROUND_NEAREST: + default: + divider = (*nanosec + base / 2) / base; + break; + case TRIG_ROUND_DOWN: + divider = (*nanosec) / base; + break; + case TRIG_ROUND_UP: + divider = (*nanosec + base - 1) / base; + break; + } + + *nanosec = base * divider; + return divider; +} + +static int ni_pcidio_cmd(comedi_device * dev, comedi_subdevice * s) +{ + comedi_cmd *cmd = &s->async->cmd; + + /* XXX configure ports for input */ + writel(0x0000, devpriv->mite->daq_io_addr + Port_Pin_Directions(0)); + + if (1) { + /* enable fifos A B C D */ + writeb(0x0f, devpriv->mite->daq_io_addr + Data_Path); + + /* set transfer width a 32 bits */ + writeb(TransferWidth(0) | TransferLength(0), + devpriv->mite->daq_io_addr + Transfer_Size_Control); + } else { + writeb(0x03, devpriv->mite->daq_io_addr + Data_Path); + writeb(TransferWidth(3) | TransferLength(0), + devpriv->mite->daq_io_addr + Transfer_Size_Control); + } + + /* protocol configuration */ + if (cmd->scan_begin_src == TRIG_TIMER) { + /* page 4-5, "input with internal REQs" */ + writeb(0, devpriv->mite->daq_io_addr + OpMode); + writeb(0x00, devpriv->mite->daq_io_addr + ClockReg); + writeb(1, devpriv->mite->daq_io_addr + Sequence); + writeb(0x04, devpriv->mite->daq_io_addr + ReqReg); + writeb(4, devpriv->mite->daq_io_addr + BlockMode); + writeb(3, devpriv->mite->daq_io_addr + LinePolarities); + writeb(0xc0, devpriv->mite->daq_io_addr + AckSer); + writel(ni_pcidio_ns_to_timer(&cmd->scan_begin_arg, + TRIG_ROUND_NEAREST), + devpriv->mite->daq_io_addr + StartDelay); + writeb(1, devpriv->mite->daq_io_addr + ReqDelay); + writeb(1, devpriv->mite->daq_io_addr + ReqNotDelay); + writeb(1, devpriv->mite->daq_io_addr + AckDelay); + writeb(0x0b, devpriv->mite->daq_io_addr + AckNotDelay); + writeb(0x01, devpriv->mite->daq_io_addr + Data1Delay); + /* manual, page 4-5: ClockSpeed comment is incorrectly listed + * on DAQOptions */ + writew(0, devpriv->mite->daq_io_addr + ClockSpeed); + writeb(0, devpriv->mite->daq_io_addr + DAQOptions); + } else { + /* TRIG_EXT */ + /* page 4-5, "input with external REQs" */ + writeb(0, devpriv->mite->daq_io_addr + OpMode); + writeb(0x00, devpriv->mite->daq_io_addr + ClockReg); + writeb(0, devpriv->mite->daq_io_addr + Sequence); + writeb(0x00, devpriv->mite->daq_io_addr + ReqReg); + writeb(4, devpriv->mite->daq_io_addr + BlockMode); + writeb(0, devpriv->mite->daq_io_addr + LinePolarities); + writeb(0x00, devpriv->mite->daq_io_addr + AckSer); + writel(1, devpriv->mite->daq_io_addr + StartDelay); + writeb(1, devpriv->mite->daq_io_addr + ReqDelay); + writeb(1, devpriv->mite->daq_io_addr + ReqNotDelay); + writeb(1, devpriv->mite->daq_io_addr + AckDelay); + writeb(0x0C, devpriv->mite->daq_io_addr + AckNotDelay); + writeb(0x10, devpriv->mite->daq_io_addr + Data1Delay); + writew(0, devpriv->mite->daq_io_addr + ClockSpeed); + writeb(0x60, devpriv->mite->daq_io_addr + DAQOptions); + } + + if (cmd->stop_src == TRIG_COUNT) { + writel(cmd->stop_arg, + devpriv->mite->daq_io_addr + Transfer_Count); + } else { + /* XXX */ + } + +#ifdef USE_DMA + writeb(ClearPrimaryTC | ClearSecondaryTC, + devpriv->mite->daq_io_addr + Group_1_First_Clear); + + { + int retval = setup_mite_dma(dev, s); + if (retval) + return retval; + } +#else + writeb(0x00, devpriv->mite->daq_io_addr + DMA_Line_Control_Group1); +#endif + writeb(0x00, devpriv->mite->daq_io_addr + DMA_Line_Control_Group2); + + /* clear and enable interrupts */ + writeb(0xff, devpriv->mite->daq_io_addr + Group_1_First_Clear); + //writeb(ClearExpired,devpriv->mite->daq_io_addr+Group_1_Second_Clear); + + writeb(IntEn, devpriv->mite->daq_io_addr + Interrupt_Control); + writeb(0x03, + devpriv->mite->daq_io_addr + Master_DMA_And_Interrupt_Control); + + if (cmd->stop_src == TRIG_NONE) { + devpriv->OpModeBits = DataLatching(0) | RunMode(7); + } else { // TRIG_TIMER + devpriv->OpModeBits = Numbered | RunMode(7); + } + if (cmd->start_src == TRIG_NOW) { + /* start */ + writeb(devpriv->OpModeBits, + devpriv->mite->daq_io_addr + OpMode); + s->async->inttrig = NULL; + } else { + /* TRIG_INT */ + s->async->inttrig = ni_pcidio_inttrig; + } + + DPRINTK("ni_pcidio: command started\n"); + return 0; +} + +static int setup_mite_dma(comedi_device * dev, comedi_subdevice * s) +{ + int retval; + + retval = ni_pcidio_request_di_mite_channel(dev); + if (retval) + return retval; + + devpriv->di_mite_chan->dir = COMEDI_INPUT; + + mite_prep_dma(devpriv->di_mite_chan, 32, 32); + + mite_dma_arm(devpriv->di_mite_chan); + return 0; +} + +static int ni_pcidio_inttrig(comedi_device * dev, comedi_subdevice * s, + unsigned int trignum) +{ + if (trignum != 0) + return -EINVAL; + + writeb(devpriv->OpModeBits, devpriv->mite->daq_io_addr + OpMode); + s->async->inttrig = NULL; + + return 1; +} + +static int ni_pcidio_cancel(comedi_device * dev, comedi_subdevice * s) +{ + writeb(0x00, + devpriv->mite->daq_io_addr + Master_DMA_And_Interrupt_Control); + ni_pcidio_release_di_mite_channel(dev); + + return 0; +} + +static int ni_pcidio_change(comedi_device * dev, comedi_subdevice * s, + unsigned long new_size) +{ + int ret; + + ret = mite_buf_change(devpriv->di_mite_ring, s->async); + if (ret < 0) + return ret; + + memset(s->async->prealloc_buf, 0xaa, s->async->prealloc_bufsz); + + return 0; +} + +static int pci_6534_load_fpga(comedi_device * dev, int fpga_index, u8 * data, + int data_len) +{ + static const int timeout = 1000; + int i, j; + writew(0x80 | fpga_index, + devpriv->mite->daq_io_addr + Firmware_Control_Register); + writew(0xc0 | fpga_index, + devpriv->mite->daq_io_addr + Firmware_Control_Register); + for (i = 0; + (readw(devpriv->mite->daq_io_addr + + Firmware_Status_Register) & 0x2) == 0 + && i < timeout; ++i) { + udelay(1); + } + if (i == timeout) { + printk("ni_pcidio: failed to load fpga %i, waiting for status 0x2\n", fpga_index); + return -EIO; + } + writew(0x80 | fpga_index, + devpriv->mite->daq_io_addr + Firmware_Control_Register); + for (i = 0; + readw(devpriv->mite->daq_io_addr + Firmware_Status_Register) != + 0x3 && i < timeout; ++i) { + udelay(1); + } + if (i == timeout) { + printk("ni_pcidio: failed to load fpga %i, waiting for status 0x3\n", fpga_index); + return -EIO; + } + for (j = 0; j + 1 < data_len;) { + unsigned int value = data[j++]; + value |= data[j++] << 8; + writew(value, + devpriv->mite->daq_io_addr + Firmware_Data_Register); + for (i = 0; + (readw(devpriv->mite->daq_io_addr + + Firmware_Status_Register) & 0x2) == 0 + && i < timeout; ++i) { + udelay(1); + } + if (i == timeout) { + printk("ni_pcidio: failed to load word into fpga %i\n", + fpga_index); + return -EIO; + } + if (need_resched()) + schedule(); + } + writew(0x0, devpriv->mite->daq_io_addr + Firmware_Control_Register); + return 0; +} + +static int pci_6534_reset_fpga(comedi_device * dev, int fpga_index) +{ + return pci_6534_load_fpga(dev, fpga_index, NULL, 0); +} + +static int pci_6534_reset_fpgas(comedi_device * dev) +{ + int ret; + int i; + writew(0x0, devpriv->mite->daq_io_addr + Firmware_Control_Register); + for (i = 0; i < 3; ++i) { + ret = pci_6534_reset_fpga(dev, i); + if (ret < 0) + break; + } + writew(0x0, devpriv->mite->daq_io_addr + Firmware_Mask_Register); + return ret; +} + +static void pci_6534_init_main_fpga(comedi_device * dev) +{ + writel(0, devpriv->mite->daq_io_addr + FPGA_Control1_Register); + writel(0, devpriv->mite->daq_io_addr + FPGA_Control2_Register); + writel(0, devpriv->mite->daq_io_addr + FPGA_SCALS_Counter_Register); + writel(0, devpriv->mite->daq_io_addr + FPGA_SCAMS_Counter_Register); + writel(0, devpriv->mite->daq_io_addr + FPGA_SCBLS_Counter_Register); + writel(0, devpriv->mite->daq_io_addr + FPGA_SCBMS_Counter_Register); +} + +static int pci_6534_upload_firmware(comedi_device * dev, int options[]) +{ + int ret; + void *main_fpga_data, *scarab_a_data, *scarab_b_data; + int main_fpga_data_len, scarab_a_data_len, scarab_b_data_len; + + if (options[COMEDI_DEVCONF_AUX_DATA_LENGTH] == 0) + return 0; + ret = pci_6534_reset_fpgas(dev); + if (ret < 0) + return ret; + main_fpga_data = comedi_aux_data(options, 0); + main_fpga_data_len = options[COMEDI_DEVCONF_AUX_DATA0_LENGTH]; + ret = pci_6534_load_fpga(dev, 2, main_fpga_data, main_fpga_data_len); + if (ret < 0) + return ret; + pci_6534_init_main_fpga(dev); + scarab_a_data = comedi_aux_data(options, 1); + scarab_a_data_len = options[COMEDI_DEVCONF_AUX_DATA1_LENGTH]; + ret = pci_6534_load_fpga(dev, 0, scarab_a_data, scarab_a_data_len); + if (ret < 0) + return ret; + scarab_b_data = comedi_aux_data(options, 2); + scarab_b_data_len = options[COMEDI_DEVCONF_AUX_DATA2_LENGTH]; + ret = pci_6534_load_fpga(dev, 1, scarab_b_data, scarab_b_data_len); + if (ret < 0) + return ret; + return 0; +} + +static int nidio_attach(comedi_device * dev, comedi_devconfig * it) +{ + comedi_subdevice *s; + int i; + int ret; + int n_subdevices; + unsigned int irq; + + printk("comedi%d: nidio:", dev->minor); + + if ((ret = alloc_private(dev, sizeof(nidio96_private))) < 0) + return ret; + spin_lock_init(&devpriv->mite_channel_lock); + + ret = nidio_find_device(dev, it->options[0], it->options[1]); + if (ret < 0) + return ret; + + ret = mite_setup(devpriv->mite); + if (ret < 0) { + printk("error setting up mite\n"); + return ret; + } + comedi_set_hw_dev(dev, &devpriv->mite->pcidev->dev); + devpriv->di_mite_ring = mite_alloc_ring(devpriv->mite); + if (devpriv->di_mite_ring == NULL) + return -ENOMEM; + + dev->board_name = this_board->name; + irq = mite_irq(devpriv->mite); + printk(" %s", dev->board_name); + if (this_board->uses_firmware) { + ret = pci_6534_upload_firmware(dev, it->options); + if (ret < 0) + return ret; + } + if (!this_board->is_diodaq) { + n_subdevices = this_board->n_8255; + } else { + n_subdevices = 1; + } + if ((ret = alloc_subdevices(dev, n_subdevices)) < 0) + return ret; + + if (!this_board->is_diodaq) { + for (i = 0; i < this_board->n_8255; i++) { + subdev_8255_init(dev, dev->subdevices + i, + nidio96_8255_cb, + (unsigned long)(devpriv->mite->daq_io_addr + + NIDIO_8255_BASE(i))); + } + } else { + + printk(" rev=%d", + readb(devpriv->mite->daq_io_addr + Chip_Version)); + + s = dev->subdevices + 0; + + dev->read_subdev = s; + s->type = COMEDI_SUBD_DIO; + s->subdev_flags = + SDF_READABLE | SDF_WRITABLE | SDF_LSAMPL | SDF_PACKED | + SDF_CMD_READ; + s->n_chan = 32; + s->range_table = &range_digital; + s->maxdata = 1; + s->insn_config = &ni_pcidio_insn_config; + s->insn_bits = &ni_pcidio_insn_bits; + s->do_cmd = &ni_pcidio_cmd; + s->do_cmdtest = &ni_pcidio_cmdtest; + s->cancel = &ni_pcidio_cancel; + s->len_chanlist = 32; /* XXX */ + s->buf_change = &ni_pcidio_change; + s->async_dma_dir = DMA_BIDIRECTIONAL; + + writel(0, devpriv->mite->daq_io_addr + Port_IO(0)); + writel(0, devpriv->mite->daq_io_addr + Port_Pin_Directions(0)); + writel(0, devpriv->mite->daq_io_addr + Port_Pin_Mask(0)); + + /* disable interrupts on board */ + writeb(0x00, + devpriv->mite->daq_io_addr + + Master_DMA_And_Interrupt_Control); + + ret = comedi_request_irq(irq, nidio_interrupt, IRQF_SHARED, + "ni_pcidio", dev); + if (ret < 0) { + printk(" irq not available"); + } + dev->irq = irq; + } + + printk("\n"); + + return 0; +} + +static int nidio_detach(comedi_device * dev) +{ + int i; + + if (this_board && !this_board->is_diodaq) { + for (i = 0; i < this_board->n_8255; i++) { + subdev_8255_cleanup(dev, dev->subdevices + i); + } + } + + if (dev->irq) + comedi_free_irq(dev->irq, dev); + + if (devpriv) { + if (devpriv->di_mite_ring) { + mite_free_ring(devpriv->di_mite_ring); + devpriv->di_mite_ring = NULL; + } + if (devpriv->mite) + mite_unsetup(devpriv->mite); + } + return 0; +} + +static int nidio_find_device(comedi_device * dev, int bus, int slot) +{ + struct mite_struct *mite; + int i; + + for (mite = mite_devices; mite; mite = mite->next) { + if (mite->used) + continue; + if (bus || slot) { + if (bus != mite->pcidev->bus->number || + slot != PCI_SLOT(mite->pcidev->devfn)) + continue; + } + for (i = 0; i < n_nidio_boards; i++) { + if (mite_device_id(mite) == nidio_boards[i].dev_id) { + dev->board_ptr = nidio_boards + i; + devpriv->mite = mite; + + return 0; + } + } + } + printk("no device found\n"); + mite_list_devices(); + return -EIO; +} + +COMEDI_PCI_INITCLEANUP(driver_pcidio, ni_pcidio_pci_table);