FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2024-12-24 10:28:57 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

sfc:On MCDI timeout, issue an FLR (and mark MCDI to fail-fast)

Browse Source 
When an MCDI command times out (whether or not we find it
completed when we poll), call efx_mcdi_abandon(), which tells
all subsequent MCDI calls to fail-fast, and queues up an FLR.

Because an FLR doesn't lead to receiving any reboot even from
the MC (unlike most other types of reset), we have to call
efx_ef10_reset_mc_allocations.
In efx_start_all(), if a reset (of any kind) is pending, we
bail out.
Without this, attempts to reconfigure (e.g. change mtu) can
cause driver/mc state inconsistency if the first MCDI call
triggers an FLR.

For similar reasons, on EF10, in
efx_reset_down(method=RESET_TYPE_MCDI_TIMEOUT), set the number
of active queues to zero before calling efx_stop_all().
And, on farch, in efx_reset_up(method=RESET_TYPE_MCDI_TIMEOUT),
set active_queues and flushes pending & outstanding to zero.

efx_mcdi_mode_{poll,event}() should not take us out of fail-fast
 mode. Instead, this is done by efx_mcdi_reset() after the FLR
completes.

The new FLR reset_type RESET_TYPE_MCDI_TIMEOUT doesn't really
fit into the hierarchy of reset 'scopes' whereby efx_reset()
decides some resets subsume others.  Thus, it uses separate logic.

Also, fixed up some inconsistency around RESET_TYPE_MC_BIST,
which was in the wrong place in that hierarchy.

Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Edward Cree 2014-04-16 19:27:48 +01:00 committed by David S. Miller
parent 10ec34fcb1
commit e283546c04
10 changed files with 133 additions and 22 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
drivers/net/ethernet/sfc/ef10.c
View File

@ -738,8 +738,11 @@ static int efx_ef10_reset(struct efx_nic *efx, enum reset_type reset_type)
/* If it was a port reset, trigger reallocation of MC resources.
* Note that on an MC reset nothing needs to be done now because we'll
* detect the MC reset later and handle it then.
* For an FLR, we never get an MC reset event, but the MC has reset all
* resources assigned to us, so we have to trigger reallocation now.
*/
if (reset_type == RESET_TYPE_ALL && !rc)
if ((reset_type == RESET_TYPE_ALL ||
reset_type == RESET_TYPE_MCDI_TIMEOUT) && !rc)
efx_ef10_reset_mc_allocations(efx);
return rc;
}
@ -2141,6 +2144,11 @@ static int efx_ef10_fini_dmaq(struct efx_nic *efx)
return 0;
}
static void efx_ef10_prepare_flr(struct efx_nic *efx)
{
atomic_set(&efx->active_queues, 0);
}
static bool efx_ef10_filter_equal(const struct efx_filter_spec *left,
const struct efx_filter_spec *right)
{
@ -3603,6 +3611,8 @@ const struct efx_nic_type efx_hunt_a0_nic_type = {
.probe_port = efx_mcdi_port_probe,
.remove_port = efx_mcdi_port_remove,
.fini_dmaq = efx_ef10_fini_dmaq,
.prepare_flr = efx_ef10_prepare_flr,
.finish_flr = efx_port_dummy_op_void,
.describe_stats = efx_ef10_describe_stats,
.update_stats = efx_ef10_update_stats,
.start_stats = efx_mcdi_mac_start_stats,

19
drivers/net/ethernet/sfc/efx.c
View File

@ -76,6 +76,7 @@ const char *const efx_reset_type_names[] = {
[RESET_TYPE_RECOVER_OR_ALL] = "RECOVER_OR_ALL",
[RESET_TYPE_WORLD] = "WORLD",
[RESET_TYPE_RECOVER_OR_DISABLE] = "RECOVER_OR_DISABLE",
[RESET_TYPE_MC_BIST] = "MC_BIST",
[RESET_TYPE_DISABLE] = "DISABLE",
[RESET_TYPE_TX_WATCHDOG] = "TX_WATCHDOG",
[RESET_TYPE_INT_ERROR] = "INT_ERROR",
@ -83,7 +84,7 @@ const char *const efx_reset_type_names[] = {
[RESET_TYPE_DMA_ERROR] = "DMA_ERROR",
[RESET_TYPE_TX_SKIP] = "TX_SKIP",
[RESET_TYPE_MC_FAILURE] = "MC_FAILURE",
[RESET_TYPE_MC_BIST] = "MC_BIST",
[RESET_TYPE_MCDI_TIMEOUT] = "MCDI_TIMEOUT (FLR)",
};
/* Reset workqueue. If any NIC has a hardware failure then a reset will be
@ -1739,7 +1740,8 @@ static void efx_start_all(struct efx_nic *efx)
/* Check that it is appropriate to restart the interface. All
* of these flags are safe to read under just the rtnl lock */
if (efx->port_enabled || !netif_running(efx->net_dev))
if (efx->port_enabled || !netif_running(efx->net_dev) ||
efx->reset_pending)
return;
efx_start_port(efx);
@ -2334,6 +2336,9 @@ void efx_reset_down(struct efx_nic *efx, enum reset_type method)
{
EFX_ASSERT_RESET_SERIALISED(efx);
if (method == RESET_TYPE_MCDI_TIMEOUT)
efx->type->prepare_flr(efx);
efx_stop_all(efx);
efx_disable_interrupts(efx);
@ -2354,6 +2359,10 @@ int efx_reset_up(struct efx_nic *efx, enum reset_type method, bool ok)
EFX_ASSERT_RESET_SERIALISED(efx);
if (method == RESET_TYPE_MCDI_TIMEOUT)
efx->type->finish_flr(efx);
/* Ensure that SRAM is initialised even if we're disabling the device */
rc = efx->type->init(efx);
if (rc) {
netif_err(efx, drv, efx->net_dev, "failed to initialise NIC\n");
@ -2417,7 +2426,10 @@ int efx_reset(struct efx_nic *efx, enum reset_type method)
/* Clear flags for the scopes we covered. We assume the NIC and
* driver are now quiescent so that there is no race here.
*/
efx->reset_pending &= -(1 << (method + 1));
if (method < RESET_TYPE_MAX_METHOD)
efx->reset_pending &= -(1 << (method + 1));
else /* it doesn't fit into the well-ordered scope hierarchy */
__clear_bit(method, &efx->reset_pending);
/* Reinitialise bus-mastering, which may have been turned off before
* the reset was scheduled. This is still appropriate, even in the
@ -2546,6 +2558,7 @@ void efx_schedule_reset(struct efx_nic *efx, enum reset_type type)
case RESET_TYPE_DISABLE:
case RESET_TYPE_RECOVER_OR_DISABLE:
case RESET_TYPE_MC_BIST:
case RESET_TYPE_MCDI_TIMEOUT:
method = type;
netif_dbg(efx, drv, efx->net_dev, "scheduling %s reset\n",
RESET_TYPE(method));

23
drivers/net/ethernet/sfc/enum.h
View File

@ -143,6 +143,7 @@ enum efx_loopback_mode {
* @RESET_TYPE_WORLD: Reset as much as possible
* @RESET_TYPE_RECOVER_OR_DISABLE: Try to recover. Apply RESET_TYPE_DISABLE if
* unsuccessful.
* @RESET_TYPE_MC_BIST: MC entering BIST mode.
* @RESET_TYPE_DISABLE: Reset datapath, MAC and PHY; leave NIC disabled
* @RESET_TYPE_TX_WATCHDOG: reset due to TX watchdog
* @RESET_TYPE_INT_ERROR: reset due to internal error
@ -150,14 +151,16 @@ enum efx_loopback_mode {
* @RESET_TYPE_DMA_ERROR: DMA error
* @RESET_TYPE_TX_SKIP: hardware completed empty tx descriptors
* @RESET_TYPE_MC_FAILURE: MC reboot/assertion
* @RESET_TYPE_MCDI_TIMEOUT: MCDI timeout.
*/
enum reset_type {
RESET_TYPE_INVISIBLE = 0,
RESET_TYPE_RECOVER_OR_ALL = 1,
RESET_TYPE_ALL = 2,
RESET_TYPE_WORLD = 3,
RESET_TYPE_RECOVER_OR_DISABLE = 4,
RESET_TYPE_DISABLE = 5,
RESET_TYPE_INVISIBLE,
RESET_TYPE_RECOVER_OR_ALL,
RESET_TYPE_ALL,
RESET_TYPE_WORLD,
RESET_TYPE_RECOVER_OR_DISABLE,
RESET_TYPE_MC_BIST,
RESET_TYPE_DISABLE,
RESET_TYPE_MAX_METHOD,
RESET_TYPE_TX_WATCHDOG,
RESET_TYPE_INT_ERROR,
@ -165,7 +168,13 @@ enum reset_type {
RESET_TYPE_DMA_ERROR,
RESET_TYPE_TX_SKIP,
RESET_TYPE_MC_FAILURE,
RESET_TYPE_MC_BIST,
/* RESET_TYPE_MCDI_TIMEOUT is actually a method, not just a reason, but
* it doesn't fit the scope hierarchy (not well-ordered by inclusion).
* We encode this by having its enum value be greater than
* RESET_TYPE_MAX_METHOD. This also prevents issuing it with
* efx_ioctl_reset.
*/
RESET_TYPE_MCDI_TIMEOUT,
RESET_TYPE_MAX,
};

4
drivers/net/ethernet/sfc/falcon.c
View File

@ -2696,6 +2696,8 @@ const struct efx_nic_type falcon_a1_nic_type = {
.fini_dmaq = efx_farch_fini_dmaq,
.prepare_flush = falcon_prepare_flush,
.finish_flush = efx_port_dummy_op_void,
.prepare_flr = efx_port_dummy_op_void,
.finish_flr = efx_farch_finish_flr,
.describe_stats = falcon_describe_nic_stats,
.update_stats = falcon_update_nic_stats,
.start_stats = falcon_start_nic_stats,
@ -2790,6 +2792,8 @@ const struct efx_nic_type falcon_b0_nic_type = {
.fini_dmaq = efx_farch_fini_dmaq,
.prepare_flush = falcon_prepare_flush,
.finish_flush = efx_port_dummy_op_void,
.prepare_flr = efx_port_dummy_op_void,
.finish_flr = efx_farch_finish_flr,
.describe_stats = falcon_describe_nic_stats,
.update_stats = falcon_update_nic_stats,
.start_stats = falcon_start_nic_stats,

22
drivers/net/ethernet/sfc/farch.c
View File

@ -741,6 +741,28 @@ int efx_farch_fini_dmaq(struct efx_nic *efx)
return rc;
}
/* Reset queue and flush accounting after FLR
*
* One possible cause of FLR recovery is that DMA may be failing (eg. if bus
* mastering was disabled), in which case we don't receive (RXQ) flush
* completion events. This means that efx->rxq_flush_outstanding remained at 4
* after the FLR; also, efx->active_queues was non-zero (as no flush completion
* events were received, and we didn't go through efx_check_tx_flush_complete())
* If we don't fix this up, on the next call to efx_realloc_channels() we won't
* flush any RX queues because efx->rxq_flush_outstanding is at the limit of 4
* for batched flush requests; and the efx->active_queues gets messed up because
* we keep incrementing for the newly initialised queues, but it never went to
* zero previously. Then we get a timeout every time we try to restart the
* queues, as it doesn't go back to zero when we should be flushing the queues.
*/
void efx_farch_finish_flr(struct efx_nic *efx)
{
atomic_set(&efx->rxq_flush_pending, 0);
atomic_set(&efx->rxq_flush_outstanding, 0);
atomic_set(&efx->active_queues, 0);
}
/**************************************************************************
*
* Event queue processing

55
drivers/net/ethernet/sfc/mcdi.c
View File

@ -52,12 +52,7 @@ static void efx_mcdi_timeout_async(unsigned long context);
static int efx_mcdi_drv_attach(struct efx_nic *efx, bool driver_operating,
bool *was_attached_out);
static bool efx_mcdi_poll_once(struct efx_nic *efx);
static inline struct efx_mcdi_iface *efx_mcdi(struct efx_nic *efx)
{
EFX_BUG_ON_PARANOID(!efx->mcdi);
return &efx->mcdi->iface;
}
static void efx_mcdi_abandon(struct efx_nic *efx);
int efx_mcdi_init(struct efx_nic *efx)
{
@ -558,6 +553,8 @@ static int _efx_mcdi_rpc_finish(struct efx_nic *efx, unsigned cmd, size_t inlen,
rc = 0;
}
efx_mcdi_abandon(efx);
/* Close the race with efx_mcdi_ev_cpl() executing just too late
* and completing a request we've just cancelled, by ensuring
* that the seqno check therein fails.
@ -672,6 +669,9 @@ int efx_mcdi_rpc_start(struct efx_nic *efx, unsigned cmd,
if (efx->mc_bist_for_other_fn)
return -ENETDOWN;
if (mcdi->mode == MCDI_MODE_FAIL)
return -ENETDOWN;
efx_mcdi_acquire_sync(mcdi);
efx_mcdi_send_request(efx, cmd, inbuf, inlen);
return 0;
@ -812,7 +812,11 @@ void efx_mcdi_mode_poll(struct efx_nic *efx)
return;
mcdi = efx_mcdi(efx);
if (mcdi->mode == MCDI_MODE_POLL)
/* If already in polling mode, nothing to do.
* If in fail-fast state, don't switch to polled completion.
* FLR recovery will do that later.
*/
if (mcdi->mode == MCDI_MODE_POLL || mcdi->mode == MCDI_MODE_FAIL)
return;
/* We can switch from event completion to polled completion, because
@ -841,8 +845,8 @@ void efx_mcdi_flush_async(struct efx_nic *efx)
mcdi = efx_mcdi(efx);
/* We must be in polling mode so no more requests can be queued */
BUG_ON(mcdi->mode != MCDI_MODE_POLL);
/* We must be in poll or fail mode so no more requests can be queued */
BUG_ON(mcdi->mode == MCDI_MODE_EVENTS);
del_timer_sync(&mcdi->async_timer);
@ -875,8 +879,11 @@ void efx_mcdi_mode_event(struct efx_nic *efx)
return;
mcdi = efx_mcdi(efx);
if (mcdi->mode == MCDI_MODE_EVENTS)
/* If already in event completion mode, nothing to do.
* If in fail-fast state, don't switch to event completion. FLR
* recovery will do that later.
*/
if (mcdi->mode == MCDI_MODE_EVENTS || mcdi->mode == MCDI_MODE_FAIL)
return;
/* We can't switch from polled to event completion in the middle of a
@ -966,6 +973,19 @@ static void efx_mcdi_ev_bist(struct efx_nic *efx)
spin_unlock(&mcdi->iface_lock);
}
/* MCDI timeouts seen, so make all MCDI calls fail-fast and issue an FLR to try
* to recover.
*/
static void efx_mcdi_abandon(struct efx_nic *efx)
{
struct efx_mcdi_iface *mcdi = efx_mcdi(efx);
if (xchg(&mcdi->mode, MCDI_MODE_FAIL) == MCDI_MODE_FAIL)
return; /* it had already been done */
netif_dbg(efx, hw, efx->net_dev, "MCDI is timing out; trying to recover\n");
efx_schedule_reset(efx, RESET_TYPE_MCDI_TIMEOUT);
}
/* Called from falcon_process_eventq for MCDI events */
void efx_mcdi_process_event(struct efx_channel *channel,
efx_qword_t *event)
@ -1512,6 +1532,19 @@ int efx_mcdi_reset(struct efx_nic *efx, enum reset_type method)
{
int rc;
/* If MCDI is down, we can't handle_assertion */
if (method == RESET_TYPE_MCDI_TIMEOUT) {
rc = pci_reset_function(efx->pci_dev);
if (rc)
return rc;
/* Re-enable polled MCDI completion */
if (efx->mcdi) {
struct efx_mcdi_iface *mcdi = efx_mcdi(efx);
mcdi->mode = MCDI_MODE_POLL;
}
return 0;
}
/* Recover from a failed assertion pre-reset */
rc = efx_mcdi_handle_assertion(efx);
if (rc)

13
drivers/net/ethernet/sfc/mcdi.h
View File

@ -28,9 +28,16 @@ enum efx_mcdi_state {
MCDI_STATE_COMPLETED,
};
/**
* enum efx_mcdi_mode - MCDI transaction mode
* @MCDI_MODE_POLL: poll for MCDI completion, until timeout
* @MCDI_MODE_EVENTS: wait for an mcdi_event. On timeout, poll once
* @MCDI_MODE_FAIL: we think MCDI is dead, so fail-fast all calls
*/
enum efx_mcdi_mode {
MCDI_MODE_POLL,
MCDI_MODE_EVENTS,
MCDI_MODE_FAIL,
};
/**
@ -104,6 +111,12 @@ struct efx_mcdi_data {
u32 fn_flags;
};
static inline struct efx_mcdi_iface *efx_mcdi(struct efx_nic *efx)
{
EFX_BUG_ON_PARANOID(!efx->mcdi);
return &efx->mcdi->iface;
}
#ifdef CONFIG_SFC_MCDI_MON
static inline struct efx_mcdi_mon *efx_mcdi_mon(struct efx_nic *efx)
{

4
drivers/net/ethernet/sfc/net_driver.h
View File

@ -972,6 +972,8 @@ struct efx_mtd_partition {
* (for Falcon architecture)
* @finish_flush: Clean up after flushing the DMA queues (for Falcon
* architecture)
* @prepare_flr: Prepare for an FLR
* @finish_flr: Clean up after an FLR
* @describe_stats: Describe statistics for ethtool
* @update_stats: Update statistics not provided by event handling.
* Either argument may be %NULL.
@ -1100,6 +1102,8 @@ struct efx_nic_type {
int (*fini_dmaq)(struct efx_nic *efx);
void (*prepare_flush)(struct efx_nic *efx);
void (*finish_flush)(struct efx_nic *efx);
void (*prepare_flr)(struct efx_nic *efx);
void (*finish_flr)(struct efx_nic *efx);
size_t (*describe_stats)(struct efx_nic *efx, u8 *names);
size_t (*update_stats)(struct efx_nic *efx, u64 *full_stats,
struct rtnl_link_stats64 *core_stats);

1
drivers/net/ethernet/sfc/nic.h
View File

@ -757,6 +757,7 @@ static inline int efx_nic_irq_test_irq_cpu(struct efx_nic *efx)
int efx_nic_flush_queues(struct efx_nic *efx);
void siena_prepare_flush(struct efx_nic *efx);
int efx_farch_fini_dmaq(struct efx_nic *efx);
void efx_farch_finish_flr(struct efx_nic *efx);
void siena_finish_flush(struct efx_nic *efx);
void falcon_start_nic_stats(struct efx_nic *efx);
void falcon_stop_nic_stats(struct efx_nic *efx);

2
drivers/net/ethernet/sfc/siena.c
View File

@ -921,6 +921,8 @@ const struct efx_nic_type siena_a0_nic_type = {
.fini_dmaq = efx_farch_fini_dmaq,
.prepare_flush = siena_prepare_flush,
.finish_flush = siena_finish_flush,
.prepare_flr = efx_port_dummy_op_void,
.finish_flr = efx_farch_finish_flr,
.describe_stats = siena_describe_nic_stats,
.update_stats = siena_update_nic_stats,
.start_stats = efx_mcdi_mac_start_stats,