FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2024-12-28 04:17:47 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

i2c: remove bfin-twi driver

Browse Source 
The blackfin architecture is getting removed, so the
twi driver can also be removed.

Acked-by: Aaron Wu <aaron.wu@analog.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann 2018-03-09 17:21:55 +01:00
parent 47838669de
commit e58af24ccd
3 changed files with 0 additions and 756 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

18
drivers/i2c/busses/Kconfig
View File

@ -445,24 +445,6 @@ config I2C_BRCMSTB
If you do not need I2C interface, say N.
config I2C_BLACKFIN_TWI
tristate "Blackfin TWI I2C support"
depends on BLACKFIN
depends on !BF561 && !BF531 && !BF532 && !BF533
help
This is the I2C bus driver for Blackfin on-chip TWI interface.
This driver can also be built as a module. If so, the module
will be called i2c-bfin-twi.
config I2C_BLACKFIN_TWI_CLK_KHZ
int "Blackfin TWI I2C clock (kHz)"
depends on I2C_BLACKFIN_TWI
range 21 400
default 50
help
The unit of the TWI clock is kHz.
config I2C_CADENCE
tristate "Cadence I2C Controller"
depends on ARCH_ZYNQ || ARM64 || XTENSA

1
drivers/i2c/busses/Makefile
View File

@ -38,7 +38,6 @@ obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o
obj-$(CONFIG_I2C_AXXIA) += i2c-axxia.o
obj-$(CONFIG_I2C_BCM2835) += i2c-bcm2835.o
obj-$(CONFIG_I2C_BCM_IPROC) += i2c-bcm-iproc.o
obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o
obj-$(CONFIG_I2C_CADENCE) += i2c-cadence.o
obj-$(CONFIG_I2C_CBUS_GPIO) += i2c-cbus-gpio.o
obj-$(CONFIG_I2C_CPM) += i2c-cpm.o

737
drivers/i2c/busses/i2c-bfin-twi.c
View File

@ -1,737 +0,0 @@
/*
* Blackfin On-Chip Two Wire Interface Driver
*
* Copyright 2005-2007 Analog Devices Inc.
*
* Enter bugs at http://blackfin.uclinux.org/
*
* Licensed under the GPL-2 or later.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/mm.h>
#include <linux/timer.h>
#include <linux/spinlock.h>
#include <linux/completion.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <asm/irq.h>
#include <asm/portmux.h>
#include <asm/bfin_twi.h>
/* SMBus mode*/
#define TWI_I2C_MODE_STANDARD 1
#define TWI_I2C_MODE_STANDARDSUB 2
#define TWI_I2C_MODE_COMBINED 3
#define TWI_I2C_MODE_REPEAT 4
static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
unsigned short twi_int_status)
{
unsigned short mast_stat = read_MASTER_STAT(iface);
if (twi_int_status & XMTSERV) {
if (iface->writeNum <= 0) {
/* start receive immediately after complete sending in
* combine mode.
*/
if (iface->cur_mode == TWI_I2C_MODE_COMBINED)
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) | MDIR);
else if (iface->manual_stop)
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) | STOP);
else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
iface->cur_msg + 1 < iface->msg_num) {
if (iface->pmsg[iface->cur_msg + 1].flags &
I2C_M_RD)
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) |
MDIR);
else
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) &
~MDIR);
}
}
/* Transmit next data */
while (iface->writeNum > 0 &&
(read_FIFO_STAT(iface) & XMTSTAT) != XMT_FULL) {
write_XMT_DATA8(iface, *(iface->transPtr++));
iface->writeNum--;
}
}
if (twi_int_status & RCVSERV) {
while (iface->readNum > 0 &&
(read_FIFO_STAT(iface) & RCVSTAT)) {
/* Receive next data */
*(iface->transPtr) = read_RCV_DATA8(iface);
if (iface->cur_mode == TWI_I2C_MODE_COMBINED) {
/* Change combine mode into sub mode after
* read first data.
*/
iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
/* Get read number from first byte in block
* combine mode.
*/
if (iface->readNum == 1 && iface->manual_stop)
iface->readNum = *iface->transPtr + 1;
}
iface->transPtr++;
iface->readNum--;
}
if (iface->readNum == 0) {
if (iface->manual_stop) {
/* Temporary workaround to avoid possible bus stall -
* Flush FIFO before issuing the STOP condition
*/
read_RCV_DATA16(iface);
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) | STOP);
} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
iface->cur_msg + 1 < iface->msg_num) {
if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD)
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) | MDIR);
else
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) & ~MDIR);
}
}
}
if (twi_int_status & MERR) {
write_INT_MASK(iface, 0);
write_MASTER_STAT(iface, 0x3e);
write_MASTER_CTL(iface, 0);
iface->result = -EIO;
if (mast_stat & LOSTARB)
dev_dbg(&iface->adap.dev, "Lost Arbitration\n");
if (mast_stat & ANAK)
dev_dbg(&iface->adap.dev, "Address Not Acknowledged\n");
if (mast_stat & DNAK)
dev_dbg(&iface->adap.dev, "Data Not Acknowledged\n");
if (mast_stat & BUFRDERR)
dev_dbg(&iface->adap.dev, "Buffer Read Error\n");
if (mast_stat & BUFWRERR)
dev_dbg(&iface->adap.dev, "Buffer Write Error\n");
/* Faulty slave devices, may drive SDA low after a transfer
* finishes. To release the bus this code generates up to 9
* extra clocks until SDA is released.
*/
if (read_MASTER_STAT(iface) & SDASEN) {
int cnt = 9;
do {
write_MASTER_CTL(iface, SCLOVR);
udelay(6);
write_MASTER_CTL(iface, 0);
udelay(6);
} while ((read_MASTER_STAT(iface) & SDASEN) && cnt--);
write_MASTER_CTL(iface, SDAOVR | SCLOVR);
udelay(6);
write_MASTER_CTL(iface, SDAOVR);
udelay(6);
write_MASTER_CTL(iface, 0);
}
/* If it is a quick transfer, only address without data,
* not an err, return 1.
*/
if (iface->cur_mode == TWI_I2C_MODE_STANDARD &&
iface->transPtr == NULL &&
(twi_int_status & MCOMP) && (mast_stat & DNAK))
iface->result = 1;
complete(&iface->complete);
return;
}
if (twi_int_status & MCOMP) {
if (twi_int_status & (XMTSERV | RCVSERV) &&
(read_MASTER_CTL(iface) & MEN) == 0 &&
(iface->cur_mode == TWI_I2C_MODE_REPEAT ||
iface->cur_mode == TWI_I2C_MODE_COMBINED)) {
iface->result = -1;
write_INT_MASK(iface, 0);
write_MASTER_CTL(iface, 0);
} else if (iface->cur_mode == TWI_I2C_MODE_COMBINED) {
if (iface->readNum == 0) {
/* set the read number to 1 and ask for manual
* stop in block combine mode
*/
iface->readNum = 1;
iface->manual_stop = 1;
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) | (0xff << 6));
} else {
/* set the readd number in other
* combine mode.
*/
write_MASTER_CTL(iface,
(read_MASTER_CTL(iface) &
(~(0xff << 6))) |
(iface->readNum << 6));
}
/* remove restart bit and enable master receive */
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) & ~RSTART);
} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
iface->cur_msg + 1 < iface->msg_num) {
iface->cur_msg++;
iface->transPtr = iface->pmsg[iface->cur_msg].buf;
iface->writeNum = iface->readNum =
iface->pmsg[iface->cur_msg].len;
/* Set Transmit device address */
write_MASTER_ADDR(iface,
iface->pmsg[iface->cur_msg].addr);
if (iface->pmsg[iface->cur_msg].flags & I2C_M_RD)
iface->read_write = I2C_SMBUS_READ;
else {
iface->read_write = I2C_SMBUS_WRITE;
/* Transmit first data */
if (iface->writeNum > 0) {
write_XMT_DATA8(iface,
*(iface->transPtr++));
iface->writeNum--;
}
}
if (iface->pmsg[iface->cur_msg].len <= 255) {
write_MASTER_CTL(iface,
(read_MASTER_CTL(iface) &
(~(0xff << 6))) |
(iface->pmsg[iface->cur_msg].len << 6));
iface->manual_stop = 0;
} else {
write_MASTER_CTL(iface,
(read_MASTER_CTL(iface) |
(0xff << 6)));
iface->manual_stop = 1;
}
/* remove restart bit before last message */
if (iface->cur_msg + 1 == iface->msg_num)
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) & ~RSTART);
} else {
iface->result = 1;
write_INT_MASK(iface, 0);
write_MASTER_CTL(iface, 0);
}
complete(&iface->complete);
}
}
/* Interrupt handler */
static irqreturn_t bfin_twi_interrupt_entry(int irq, void *dev_id)
{
struct bfin_twi_iface *iface = dev_id;
unsigned long flags;
unsigned short twi_int_status;
spin_lock_irqsave(&iface->lock, flags);
while (1) {
twi_int_status = read_INT_STAT(iface);
if (!twi_int_status)
break;
/* Clear interrupt status */
write_INT_STAT(iface, twi_int_status);
bfin_twi_handle_interrupt(iface, twi_int_status);
}
spin_unlock_irqrestore(&iface->lock, flags);
return IRQ_HANDLED;
}
/*
* One i2c master transfer
*/
static int bfin_twi_do_master_xfer(struct i2c_adapter *adap,
struct i2c_msg *msgs, int num)
{
struct bfin_twi_iface *iface = adap->algo_data;
struct i2c_msg *pmsg;
int rc = 0;
if (!(read_CONTROL(iface) & TWI_ENA))
return -ENXIO;
if (read_MASTER_STAT(iface) & BUSBUSY)
return -EAGAIN;
iface->pmsg = msgs;
iface->msg_num = num;
iface->cur_msg = 0;
pmsg = &msgs[0];
if (pmsg->flags & I2C_M_TEN) {
dev_err(&adap->dev, "10 bits addr not supported!\n");
return -EINVAL;
}
if (iface->msg_num > 1)
iface->cur_mode = TWI_I2C_MODE_REPEAT;
iface->manual_stop = 0;
iface->transPtr = pmsg->buf;
iface->writeNum = iface->readNum = pmsg->len;
iface->result = 0;
init_completion(&(iface->complete));
/* Set Transmit device address */
write_MASTER_ADDR(iface, pmsg->addr);
/* FIFO Initiation. Data in FIFO should be
* discarded before start a new operation.
*/
write_FIFO_CTL(iface, 0x3);
write_FIFO_CTL(iface, 0);
if (pmsg->flags & I2C_M_RD)
iface->read_write = I2C_SMBUS_READ;
else {
iface->read_write = I2C_SMBUS_WRITE;
/* Transmit first data */
if (iface->writeNum > 0) {
write_XMT_DATA8(iface, *(iface->transPtr++));
iface->writeNum--;
}
}
/* clear int stat */
write_INT_STAT(iface, MERR | MCOMP | XMTSERV | RCVSERV);
/* Interrupt mask . Enable XMT, RCV interrupt */
write_INT_MASK(iface, MCOMP | MERR | RCVSERV | XMTSERV);
if (pmsg->len <= 255)
write_MASTER_CTL(iface, pmsg->len << 6);
else {
write_MASTER_CTL(iface, 0xff << 6);
iface->manual_stop = 1;
}
/* Master enable */
write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
(iface->msg_num > 1 ? RSTART : 0) |
((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) |
((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0));
while (!iface->result) {
if (!wait_for_completion_timeout(&iface->complete,
adap->timeout)) {
iface->result = -1;
dev_err(&adap->dev, "master transfer timeout\n");
}
}
if (iface->result == 1)
rc = iface->cur_msg + 1;
else
rc = iface->result;
return rc;
}
/*
* Generic i2c master transfer entrypoint
*/
static int bfin_twi_master_xfer(struct i2c_adapter *adap,
struct i2c_msg *msgs, int num)
{
return bfin_twi_do_master_xfer(adap, msgs, num);
}
/*
* One I2C SMBus transfer
*/
int bfin_twi_do_smbus_xfer(struct i2c_adapter *adap, u16 addr,
unsigned short flags, char read_write,
u8 command, int size, union i2c_smbus_data *data)
{
struct bfin_twi_iface *iface = adap->algo_data;
int rc = 0;
if (!(read_CONTROL(iface) & TWI_ENA))
return -ENXIO;
if (read_MASTER_STAT(iface) & BUSBUSY)
return -EAGAIN;
iface->writeNum = 0;
iface->readNum = 0;
/* Prepare datas & select mode */
switch (size) {
case I2C_SMBUS_QUICK:
iface->transPtr = NULL;
iface->cur_mode = TWI_I2C_MODE_STANDARD;
break;
case I2C_SMBUS_BYTE:
if (data == NULL)
iface->transPtr = NULL;
else {
if (read_write == I2C_SMBUS_READ)
iface->readNum = 1;
else
iface->writeNum = 1;
iface->transPtr = &data->byte;
}
iface->cur_mode = TWI_I2C_MODE_STANDARD;
break;
case I2C_SMBUS_BYTE_DATA:
if (read_write == I2C_SMBUS_READ) {
iface->readNum = 1;
iface->cur_mode = TWI_I2C_MODE_COMBINED;
} else {
iface->writeNum = 1;
iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
}
iface->transPtr = &data->byte;
break;
case I2C_SMBUS_WORD_DATA:
if (read_write == I2C_SMBUS_READ) {
iface->readNum = 2;
iface->cur_mode = TWI_I2C_MODE_COMBINED;
} else {
iface->writeNum = 2;
iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
}
iface->transPtr = (u8 *)&data->word;
break;
case I2C_SMBUS_PROC_CALL:
iface->writeNum = 2;
iface->readNum = 2;
iface->cur_mode = TWI_I2C_MODE_COMBINED;
iface->transPtr = (u8 *)&data->word;
break;
case I2C_SMBUS_BLOCK_DATA:
if (read_write == I2C_SMBUS_READ) {
iface->readNum = 0;
iface->cur_mode = TWI_I2C_MODE_COMBINED;
} else {
iface->writeNum = data->block[0] + 1;
iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
}
iface->transPtr = data->block;
break;
case I2C_SMBUS_I2C_BLOCK_DATA:
if (read_write == I2C_SMBUS_READ) {
iface->readNum = data->block[0];
iface->cur_mode = TWI_I2C_MODE_COMBINED;
} else {
iface->writeNum = data->block[0];
iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
}
iface->transPtr = (u8 *)&data->block[1];
break;
default:
return -1;
}
iface->result = 0;
iface->manual_stop = 0;
iface->read_write = read_write;
iface->command = command;
init_completion(&(iface->complete));
/* FIFO Initiation. Data in FIFO should be discarded before
* start a new operation.
*/
write_FIFO_CTL(iface, 0x3);
write_FIFO_CTL(iface, 0);
/* clear int stat */
write_INT_STAT(iface, MERR | MCOMP | XMTSERV | RCVSERV);
/* Set Transmit device address */
write_MASTER_ADDR(iface, addr);
switch (iface->cur_mode) {
case TWI_I2C_MODE_STANDARDSUB:
write_XMT_DATA8(iface, iface->command);
write_INT_MASK(iface, MCOMP | MERR |
((iface->read_write == I2C_SMBUS_READ) ?
RCVSERV : XMTSERV));
if (iface->writeNum + 1 <= 255)
write_MASTER_CTL(iface, (iface->writeNum + 1) << 6);
else {
write_MASTER_CTL(iface, 0xff << 6);
iface->manual_stop = 1;
}
/* Master enable */
write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0));
break;
case TWI_I2C_MODE_COMBINED:
write_XMT_DATA8(iface, iface->command);
write_INT_MASK(iface, MCOMP | MERR | RCVSERV | XMTSERV);
if (iface->writeNum > 0)
write_MASTER_CTL(iface, (iface->writeNum + 1) << 6);
else
write_MASTER_CTL(iface, 0x1 << 6);
/* Master enable */
write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN | RSTART |
((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0));
break;
default:
write_MASTER_CTL(iface, 0);
if (size != I2C_SMBUS_QUICK) {
/* Don't access xmit data register when this is a
* read operation.
*/
if (iface->read_write != I2C_SMBUS_READ) {
if (iface->writeNum > 0) {
write_XMT_DATA8(iface,
*(iface->transPtr++));
if (iface->writeNum <= 255)
write_MASTER_CTL(iface,
iface->writeNum << 6);
else {
write_MASTER_CTL(iface,
0xff << 6);
iface->manual_stop = 1;
}
iface->writeNum--;
} else {
write_XMT_DATA8(iface, iface->command);
write_MASTER_CTL(iface, 1 << 6);
}
} else {
if (iface->readNum > 0 && iface->readNum <= 255)
write_MASTER_CTL(iface,
iface->readNum << 6);
else if (iface->readNum > 255) {
write_MASTER_CTL(iface, 0xff << 6);
iface->manual_stop = 1;
} else
break;
}
}
write_INT_MASK(iface, MCOMP | MERR |
((iface->read_write == I2C_SMBUS_READ) ?
RCVSERV : XMTSERV));
/* Master enable */
write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) |
((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0));
break;
}
while (!iface->result) {
if (!wait_for_completion_timeout(&iface->complete,
adap->timeout)) {
iface->result = -1;
dev_err(&adap->dev, "smbus transfer timeout\n");
}
}
rc = (iface->result >= 0) ? 0 : -1;
return rc;
}
/*
* Generic I2C SMBus transfer entrypoint
*/
int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
unsigned short flags, char read_write,
u8 command, int size, union i2c_smbus_data *data)
{
return bfin_twi_do_smbus_xfer(adap, addr, flags,
read_write, command, size, data);
}
/*
* Return what the adapter supports
*/
static u32 bfin_twi_functionality(struct i2c_adapter *adap)
{
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL |
I2C_FUNC_I2C | I2C_FUNC_SMBUS_I2C_BLOCK;
}
static const struct i2c_algorithm bfin_twi_algorithm = {
.master_xfer = bfin_twi_master_xfer,
.smbus_xfer = bfin_twi_smbus_xfer,
.functionality = bfin_twi_functionality,
};
#ifdef CONFIG_PM_SLEEP
static int i2c_bfin_twi_suspend(struct device *dev)
{
struct bfin_twi_iface *iface = dev_get_drvdata(dev);
iface->saved_clkdiv = read_CLKDIV(iface);
iface->saved_control = read_CONTROL(iface);
free_irq(iface->irq, iface);
/* Disable TWI */
write_CONTROL(iface, iface->saved_control & ~TWI_ENA);
return 0;
}
static int i2c_bfin_twi_resume(struct device *dev)
{
struct bfin_twi_iface *iface = dev_get_drvdata(dev);
int rc = request_irq(iface->irq, bfin_twi_interrupt_entry,
0, to_platform_device(dev)->name, iface);
if (rc) {
dev_err(dev, "Can't get IRQ %d !\n", iface->irq);
return -ENODEV;
}
/* Resume TWI interface clock as specified */
write_CLKDIV(iface, iface->saved_clkdiv);
/* Resume TWI */
write_CONTROL(iface, iface->saved_control);
return 0;
}
static SIMPLE_DEV_PM_OPS(i2c_bfin_twi_pm,
i2c_bfin_twi_suspend, i2c_bfin_twi_resume);
#define I2C_BFIN_TWI_PM_OPS (&i2c_bfin_twi_pm)
#else
#define I2C_BFIN_TWI_PM_OPS NULL
#endif
static int i2c_bfin_twi_probe(struct platform_device *pdev)
{
struct bfin_twi_iface *iface;
struct i2c_adapter *p_adap;
struct resource *res;
int rc;
unsigned int clkhilow;
iface = devm_kzalloc(&pdev->dev, sizeof(struct bfin_twi_iface),
GFP_KERNEL);
if (!iface) {
dev_err(&pdev->dev, "Cannot allocate memory\n");
return -ENOMEM;
}
spin_lock_init(&(iface->lock));
/* Find and map our resources */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
iface->regs_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(iface->regs_base)) {
dev_err(&pdev->dev, "Cannot map IO\n");
return PTR_ERR(iface->regs_base);
}
iface->irq = platform_get_irq(pdev, 0);
if (iface->irq < 0) {
dev_err(&pdev->dev, "No IRQ specified\n");
return -ENOENT;
}
p_adap = &iface->adap;
p_adap->nr = pdev->id;
strlcpy(p_adap->name, pdev->name, sizeof(p_adap->name));
p_adap->algo = &bfin_twi_algorithm;
p_adap->algo_data = iface;
p_adap->class = I2C_CLASS_DEPRECATED;
p_adap->dev.parent = &pdev->dev;
p_adap->timeout = 5 * HZ;
p_adap->retries = 3;
rc = peripheral_request_list(
dev_get_platdata(&pdev->dev),
"i2c-bfin-twi");
if (rc) {
dev_err(&pdev->dev, "Can't setup pin mux!\n");
return -EBUSY;
}
rc = devm_request_irq(&pdev->dev, iface->irq, bfin_twi_interrupt_entry,
0, pdev->name, iface);
if (rc) {
dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq);
rc = -ENODEV;
goto out_error;
}
/* Set TWI internal clock as 10MHz */
write_CONTROL(iface, ((get_sclk() / 1000 / 1000 + 5) / 10) & 0x7F);
/*
* We will not end up with a CLKDIV=0 because no one will specify
* 20kHz SCL or less in Kconfig now. (5 * 1000 / 20 = 250)
*/
clkhilow = ((10 * 1000 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ) + 1) / 2;
/* Set Twi interface clock as specified */
write_CLKDIV(iface, (clkhilow << 8) | clkhilow);
/* Enable TWI */
write_CONTROL(iface, read_CONTROL(iface) | TWI_ENA);
rc = i2c_add_numbered_adapter(p_adap);
if (rc < 0)
goto out_error;
platform_set_drvdata(pdev, iface);
dev_info(&pdev->dev, "Blackfin BF5xx on-chip I2C TWI Controller, "
"regs_base@%p\n", iface->regs_base);
return 0;
out_error:
peripheral_free_list(dev_get_platdata(&pdev->dev));
return rc;
}
static int i2c_bfin_twi_remove(struct platform_device *pdev)
{
struct bfin_twi_iface *iface = platform_get_drvdata(pdev);
i2c_del_adapter(&(iface->adap));
peripheral_free_list(dev_get_platdata(&pdev->dev));
return 0;
}
static struct platform_driver i2c_bfin_twi_driver = {
.probe = i2c_bfin_twi_probe,
.remove = i2c_bfin_twi_remove,
.driver = {
.name = "i2c-bfin-twi",
.pm = I2C_BFIN_TWI_PM_OPS,
},
};
static int __init i2c_bfin_twi_init(void)
{
return platform_driver_register(&i2c_bfin_twi_driver);
}
static void __exit i2c_bfin_twi_exit(void)
{
platform_driver_unregister(&i2c_bfin_twi_driver);
}
subsys_initcall(i2c_bfin_twi_init);
module_exit(i2c_bfin_twi_exit);
MODULE_AUTHOR("Bryan Wu, Sonic Zhang");
MODULE_DESCRIPTION("Blackfin BF5xx on-chip I2C TWI Controller Driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:i2c-bfin-twi");