staging: rts5208: fix comment blocks style in rtsx_chip.h

This patch fixes the following checkpatch.pl warning in rtsx_chip.h:
WARNING: Block comments use a trailing */ on a separate line

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Sergio Paracuellos 2016-09-23 16:12:09 +02:00 committed by Greg Kroah-Hartman
parent 20807e6ec4
commit e89ac165a5

View File

@ -44,8 +44,10 @@
#define MG_SET_ICV_SLOW
/* HW may miss ERR/CMDNK signal when sampling INT status. */
#define MS_SAMPLE_INT_ERR
/* HW DO NOT support Wait_INT function during READ_BYTES
* transfer mode */
/*
* HW DO NOT support Wait_INT function
* during READ_BYTES transfer mode
*/
#define READ_BYTES_WAIT_INT
#endif
@ -101,17 +103,17 @@
#define TRANSPORT_NO_SENSE 2 /* Command failed, no auto-sense */
#define TRANSPORT_ERROR 3 /* Transport bad (i.e. device dead) */
/*-----------------------------------
Start-Stop-Unit
-----------------------------------*/
/*
* Start-Stop-Unit
*/
#define STOP_MEDIUM 0x00 /* access disable */
#define MAKE_MEDIUM_READY 0x01 /* access enable */
#define UNLOAD_MEDIUM 0x02 /* unload */
#define LOAD_MEDIUM 0x03 /* load */
/*-----------------------------------
STANDARD_INQUIRY
-----------------------------------*/
/*
* STANDARD_INQUIRY
*/
#define QULIFIRE 0x00
#define AENC_FNC 0x00
#define TRML_IOP 0x00
@ -128,17 +130,15 @@
#define PRDCT_REV_LEN 4 /* Product LOT Length */
/* Dynamic flag definitions: used in set_bit() etc. */
#define RTSX_FLIDX_TRANS_ACTIVE 18 /* 0x00040000 transfer is active */
#define RTSX_FLIDX_ABORTING 20 /* 0x00100000 abort is in
* progress */
#define RTSX_FLIDX_DISCONNECTING 21 /* 0x00200000 disconnect
* in progress */
#define RTSX_FLIDX_TRANS_ACTIVE 18 /* 0x00040000 transfer is active */
#define RTSX_FLIDX_ABORTING 20 /* 0x00100000 abort is in progress */
#define RTSX_FLIDX_DISCONNECTING 21 /* 0x00200000 disconnect in progress */
#define ABORTING_OR_DISCONNECTING ((1UL << US_FLIDX_ABORTING) | \
(1UL << US_FLIDX_DISCONNECTING))
#define RTSX_FLIDX_RESETTING 22 /* 0x00400000 device reset
* in progress */
#define RTSX_FLIDX_TIMED_OUT 23 /* 0x00800000 SCSI
* midlayer timed out */
#define RTSX_FLIDX_RESETTING 22 /* 0x00400000 device reset in progress */
#define RTSX_FLIDX_TIMED_OUT 23 /* 0x00800000 SCSI midlayer timed out */
#define DRCT_ACCESS_DEV 0x00 /* Direct Access Device */
#define RMB_DISC 0x80 /* The Device is Removable */
@ -173,9 +173,9 @@
#define FIRST_RESET 0x01
#define USED_EXIST 0x02
/*-----------------------------------
SENSE_DATA
-----------------------------------*/
/*
* SENSE_DATA
*/
/*---- valid ----*/
#define SENSE_VALID 0x80 /* Sense data is valid as SCSI2 */
#define SENSE_INVALID 0x00 /* Sense data is invalid as SCSI2 */
@ -706,9 +706,9 @@ struct rtsx_chip {
int cur_card;
unsigned long need_release; /* need release bit map */
unsigned long need_reset; /* need reset
* bit map */
/* Flag to indicate that this card is just resumed from SS state,
unsigned long need_reset; /* need reset bit map */
/*
* Flag to indicate that this card is just resumed from SS state,
* and need released before being resetted
*/
unsigned long need_reinit;
@ -726,8 +726,10 @@ struct rtsx_chip {
u8 card_ejected; /* card ejected bit map */
u8 card_wp; /* card write protected bit map */
u8 lun_mc; /* flag to indicate whether to answer
* MediaChange */
u8 lun_mc; /*
* flag to indicate whether to answer
* MediaChange
*/
#ifndef LED_AUTO_BLINK
int led_toggle_counter;