FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2024-12-18 23:18:20 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

pinctrl: Qualcomm SPMI PMIC GPIO pin controller driver

Browse Source 
This is the pinctrl, pinmux, pinconf and gpiolib driver for the
Qualcomm GPIO sub-function blocks found in the PMIC chips.

Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Ivan T. Ivanov 2014-10-22 12:58:46 +03:00 committed by Linus Walleij
parent 89a7117d56
commit eadff30244
3 changed files with 947 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
drivers/pinctrl/qcom/Kconfig
View File

@ -47,4 +47,17 @@ config PINCTRL_MSM8X74
This is the pinctrl, pinmux, pinconf and gpiolib driver for the
Qualcomm TLMM block found in the Qualcomm 8974 platform.
config PINCTRL_QCOM_SPMI_PMIC
tristate "Qualcomm SPMI PMIC pin controller driver"
depends on GPIOLIB && OF && SPMI
select REGMAP_SPMI
select PINMUX
select PINCONF
select GENERIC_PINCONF
help
This is the pinctrl, pinmux, pinconf and gpiolib driver for the
Qualcomm GPIO and MPP blocks found in the Qualcomm PMIC's chips,
which are using SPMI for communication with SoC. Example PMIC's
devices are pm8841, pm8941 and pma8084.
endif

1
drivers/pinctrl/qcom/Makefile
View File

@ -5,3 +5,4 @@ obj-$(CONFIG_PINCTRL_APQ8084) += pinctrl-apq8084.o
obj-$(CONFIG_PINCTRL_IPQ8064) += pinctrl-ipq8064.o
obj-$(CONFIG_PINCTRL_MSM8960) += pinctrl-msm8960.o
obj-$(CONFIG_PINCTRL_MSM8X74) += pinctrl-msm8x74.o
obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) += pinctrl-spmi-gpio.o

933
drivers/pinctrl/qcom/pinctrl-spmi-gpio.c Normal file
View File

@ -0,0 +1,933 @@
/*
* Copyright (c) 2012-2014, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/pinctrl/pinconf.h>
#include <linux/pinctrl/pinmux.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include "../core.h"
#include "../pinctrl-utils.h"
#define PMIC_GPIO_ADDRESS_RANGE 0x100
/* type and subtype registers base address offsets */
#define PMIC_GPIO_REG_TYPE 0x4
#define PMIC_GPIO_REG_SUBTYPE 0x5
/* GPIO peripheral type and subtype out_values */
#define PMIC_GPIO_TYPE 0x10
#define PMIC_GPIO_SUBTYPE_GPIO_4CH 0x1
#define PMIC_GPIO_SUBTYPE_GPIOC_4CH 0x5
#define PMIC_GPIO_SUBTYPE_GPIO_8CH 0x9
#define PMIC_GPIO_SUBTYPE_GPIOC_8CH 0xd
#define PMIC_MPP_REG_RT_STS 0x10
#define PMIC_MPP_REG_RT_STS_VAL_MASK 0x1
/* control register base address offsets */
#define PMIC_GPIO_REG_MODE_CTL 0x40
#define PMIC_GPIO_REG_DIG_VIN_CTL 0x41
#define PMIC_GPIO_REG_DIG_PULL_CTL 0x42
#define PMIC_GPIO_REG_DIG_OUT_CTL 0x45
#define PMIC_GPIO_REG_EN_CTL 0x46
/* PMIC_GPIO_REG_MODE_CTL */
#define PMIC_GPIO_REG_MODE_VALUE_SHIFT 0x1
#define PMIC_GPIO_REG_MODE_FUNCTION_SHIFT 1
#define PMIC_GPIO_REG_MODE_FUNCTION_MASK 0x7
#define PMIC_GPIO_REG_MODE_DIR_SHIFT 4
#define PMIC_GPIO_REG_MODE_DIR_MASK 0x7
/* PMIC_GPIO_REG_DIG_VIN_CTL */
#define PMIC_GPIO_REG_VIN_SHIFT 0
#define PMIC_GPIO_REG_VIN_MASK 0x7
/* PMIC_GPIO_REG_DIG_PULL_CTL */
#define PMIC_GPIO_REG_PULL_SHIFT 0
#define PMIC_GPIO_REG_PULL_MASK 0x7
#define PMIC_GPIO_PULL_DOWN 4
#define PMIC_GPIO_PULL_DISABLE 5
/* PMIC_GPIO_REG_DIG_OUT_CTL */
#define PMIC_GPIO_REG_OUT_STRENGTH_SHIFT 0
#define PMIC_GPIO_REG_OUT_STRENGTH_MASK 0x3
#define PMIC_GPIO_REG_OUT_TYPE_SHIFT 4
#define PMIC_GPIO_REG_OUT_TYPE_MASK 0x3
/*
* Output type - indicates pin should be configured as push-pull,
* open drain or open source.
*/
#define PMIC_GPIO_OUT_BUF_CMOS 0
#define PMIC_GPIO_OUT_BUF_OPEN_DRAIN_NMOS 1
#define PMIC_GPIO_OUT_BUF_OPEN_DRAIN_PMOS 2
/* PMIC_GPIO_REG_EN_CTL */
#define PMIC_GPIO_REG_MASTER_EN_SHIFT 7
#define PMIC_GPIO_PHYSICAL_OFFSET 1
/* Qualcomm specific pin configurations */
#define PMIC_GPIO_CONF_PULL_UP (PIN_CONFIG_END + 1)
#define PMIC_GPIO_CONF_STRENGTH (PIN_CONFIG_END + 2)
/**
* struct pmic_gpio_pad - keep current GPIO settings
* @base: Address base in SPMI device.
* @irq: IRQ number which this GPIO generate.
* @is_enabled: Set to false when GPIO should be put in high Z state.
* @out_value: Cached pin output value
* @have_buffer: Set to true if GPIO output could be configured in push-pull,
* open-drain or open-source mode.
* @output_enabled: Set to true if GPIO output logic is enabled.
* @input_enabled: Set to true if GPIO input buffer logic is enabled.
* @num_sources: Number of power-sources supported by this GPIO.
* @power_source: Current power-source used.
* @buffer_type: Push-pull, open-drain or open-source.
* @pullup: Constant current which flow trough GPIO output buffer.
* @strength: No, Low, Medium, High
* @function: See pmic_gpio_functions[]
*/
struct pmic_gpio_pad {
u16 base;
int irq;
bool is_enabled;
bool out_value;
bool have_buffer;
bool output_enabled;
bool input_enabled;
unsigned int num_sources;
unsigned int power_source;
unsigned int buffer_type;
unsigned int pullup;
unsigned int strength;
unsigned int function;
};
struct pmic_gpio_state {
struct device *dev;
struct regmap *map;
struct pinctrl_dev *ctrl;
struct gpio_chip chip;
};
struct pmic_gpio_bindings {
const char *property;
unsigned param;
};
static struct pmic_gpio_bindings pmic_gpio_bindings[] = {
{"qcom,pull-up-strength", PMIC_GPIO_CONF_PULL_UP},
{"qcom,drive-strength", PMIC_GPIO_CONF_STRENGTH},
};
static const char *const pmic_gpio_groups[] = {
"gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7", "gpio8",
"gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14", "gpio15",
"gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21", "gpio22",
"gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28", "gpio29",
"gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35", "gpio36",
};
static const char *const pmic_gpio_functions[] = {
PMIC_GPIO_FUNC_NORMAL, PMIC_GPIO_FUNC_PAIRED,
PMIC_GPIO_FUNC_FUNC1, PMIC_GPIO_FUNC_FUNC2,
PMIC_GPIO_FUNC_DTEST1, PMIC_GPIO_FUNC_DTEST2,
PMIC_GPIO_FUNC_DTEST3, PMIC_GPIO_FUNC_DTEST4,
};
static inline struct pmic_gpio_state *to_gpio_state(struct gpio_chip *chip)
{
return container_of(chip, struct pmic_gpio_state, chip);
};
static int pmic_gpio_read(struct pmic_gpio_state *state,
struct pmic_gpio_pad *pad, unsigned int addr)
{
unsigned int val;
int ret;
ret = regmap_read(state->map, pad->base + addr, &val);
if (ret < 0)
dev_err(state->dev, "read 0x%x failed\n", addr);
else
ret = val;
return ret;
}
static int pmic_gpio_write(struct pmic_gpio_state *state,
struct pmic_gpio_pad *pad, unsigned int addr,
unsigned int val)
{
int ret;
ret = regmap_write(state->map, pad->base + addr, val);
if (ret < 0)
dev_err(state->dev, "write 0x%x failed\n", addr);
return ret;
}
static int pmic_gpio_get_groups_count(struct pinctrl_dev *pctldev)
{
/* Every PIN is a group */
return pctldev->desc->npins;
}
static const char *pmic_gpio_get_group_name(struct pinctrl_dev *pctldev,
unsigned pin)
{
return pctldev->desc->pins[pin].name;
}
static int pmic_gpio_get_group_pins(struct pinctrl_dev *pctldev, unsigned pin,
const unsigned **pins, unsigned *num_pins)
{
*pins = &pctldev->desc->pins[pin].number;
*num_pins = 1;
return 0;
}
static int pmic_gpio_parse_dt_config(struct device_node *np,
struct pinctrl_dev *pctldev,
unsigned long **configs,
unsigned int *nconfs)
{
struct pmic_gpio_bindings *par;
unsigned long cfg;
int ret, i;
u32 val;
for (i = 0; i < ARRAY_SIZE(pmic_gpio_bindings); i++) {
par = &pmic_gpio_bindings[i];
ret = of_property_read_u32(np, par->property, &val);
/* property not found */
if (ret == -EINVAL)
continue;
/* use zero as default value */
if (ret)
val = 0;
dev_dbg(pctldev->dev, "found %s with value %u\n",
par->property, val);
cfg = pinconf_to_config_packed(par->param, val);
ret = pinctrl_utils_add_config(pctldev, configs, nconfs, cfg);
if (ret)
return ret;
}
return 0;
}
static int pmic_gpio_dt_subnode_to_map(struct pinctrl_dev *pctldev,
struct device_node *np,
struct pinctrl_map **map,
unsigned *reserv, unsigned *nmaps,
enum pinctrl_map_type type)
{
unsigned long *configs = NULL;
unsigned nconfs = 0;
struct property *prop;
const char *group;
int ret;
ret = pmic_gpio_parse_dt_config(np, pctldev, &configs, &nconfs);
if (ret < 0)
return ret;
if (!nconfs)
return 0;
ret = of_property_count_strings(np, "pins");
if (ret < 0)
goto exit;
ret = pinctrl_utils_reserve_map(pctldev, map, reserv, nmaps, ret);
if (ret < 0)
goto exit;
of_property_for_each_string(np, "pins", prop, group) {
ret = pinctrl_utils_add_map_configs(pctldev, map,
reserv, nmaps, group,
configs, nconfs, type);
if (ret < 0)
break;
}
exit:
kfree(configs);
return ret;
}
static int pmic_gpio_dt_node_to_map(struct pinctrl_dev *pctldev,
struct device_node *np_config,
struct pinctrl_map **map, unsigned *nmaps)
{
enum pinctrl_map_type type;
struct device_node *np;
unsigned reserv;
int ret;
ret = 0;
*map = NULL;
*nmaps = 0;
reserv = 0;
type = PIN_MAP_TYPE_CONFIGS_GROUP;
for_each_child_of_node(np_config, np) {
ret = pinconf_generic_dt_subnode_to_map(pctldev, np, map,
&reserv, nmaps, type);
if (ret)
break;
ret = pmic_gpio_dt_subnode_to_map(pctldev, np, map, &reserv,
nmaps, type);
if (ret)
break;
}
if (ret < 0)
pinctrl_utils_dt_free_map(pctldev, *map, *nmaps);
return ret;
}
static const struct pinctrl_ops pmic_gpio_pinctrl_ops = {
.get_groups_count = pmic_gpio_get_groups_count,
.get_group_name = pmic_gpio_get_group_name,
.get_group_pins = pmic_gpio_get_group_pins,
.dt_node_to_map = pmic_gpio_dt_node_to_map,
.dt_free_map = pinctrl_utils_dt_free_map,
};
static int pmic_gpio_get_functions_count(struct pinctrl_dev *pctldev)
{
return ARRAY_SIZE(pmic_gpio_functions);
}
static const char *pmic_gpio_get_function_name(struct pinctrl_dev *pctldev,
unsigned function)
{
return pmic_gpio_functions[function];
}
static int pmic_gpio_get_function_groups(struct pinctrl_dev *pctldev,
unsigned function,
const char *const **groups,
unsigned *const num_qgroups)
{
*groups = pmic_gpio_groups;
*num_qgroups = pctldev->desc->npins;
return 0;
}
static int pmic_gpio_set_mux(struct pinctrl_dev *pctldev, unsigned function,
unsigned pin)
{
struct pmic_gpio_state *state = pinctrl_dev_get_drvdata(pctldev);
struct pmic_gpio_pad *pad;
unsigned int val;
int ret;
pad = pctldev->desc->pins[pin].drv_data;
pad->function = function;
val = 0;
if (pad->output_enabled) {
if (pad->input_enabled)
val = 2;
else
val = 1;
}
val |= pad->function << PMIC_GPIO_REG_MODE_FUNCTION_SHIFT;
val |= pad->out_value & PMIC_GPIO_REG_MODE_VALUE_SHIFT;
ret = pmic_gpio_write(state, pad, PMIC_GPIO_REG_MODE_CTL, val);
if (ret < 0)
return ret;
val = pad->is_enabled << PMIC_GPIO_REG_MASTER_EN_SHIFT;
return pmic_gpio_write(state, pad, PMIC_GPIO_REG_EN_CTL, val);
}
static const struct pinmux_ops pmic_gpio_pinmux_ops = {
.get_functions_count = pmic_gpio_get_functions_count,
.get_function_name = pmic_gpio_get_function_name,
.get_function_groups = pmic_gpio_get_function_groups,
.set_mux = pmic_gpio_set_mux,
};
static int pmic_gpio_config_get(struct pinctrl_dev *pctldev,
unsigned int pin, unsigned long *config)
{
unsigned param = pinconf_to_config_param(*config);
struct pmic_gpio_pad *pad;
unsigned arg;
pad = pctldev->desc->pins[pin].drv_data;
switch (param) {
case PIN_CONFIG_DRIVE_PUSH_PULL:
arg = pad->buffer_type == PMIC_GPIO_OUT_BUF_CMOS;
break;
case PIN_CONFIG_DRIVE_OPEN_DRAIN:
arg = pad->buffer_type == PMIC_GPIO_OUT_BUF_OPEN_DRAIN_NMOS;
break;
case PIN_CONFIG_DRIVE_OPEN_SOURCE:
arg = pad->buffer_type == PMIC_GPIO_OUT_BUF_OPEN_DRAIN_PMOS;
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
arg = pad->pullup == PMIC_GPIO_PULL_DOWN;
break;
case PIN_CONFIG_BIAS_DISABLE:
arg = pad->pullup = PMIC_GPIO_PULL_DISABLE;
break;
case PIN_CONFIG_BIAS_PULL_UP:
arg = pad->pullup == PMIC_GPIO_PULL_UP_30;
break;
case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
arg = !pad->is_enabled;
break;
case PIN_CONFIG_POWER_SOURCE:
arg = pad->power_source;
break;
case PIN_CONFIG_INPUT_ENABLE:
arg = pad->input_enabled;
break;
case PIN_CONFIG_OUTPUT:
arg = pad->out_value;
break;
case PMIC_GPIO_CONF_PULL_UP:
arg = pad->pullup;
break;
case PMIC_GPIO_CONF_STRENGTH:
arg = pad->strength;
break;
default:
return -EINVAL;
}
*config = pinconf_to_config_packed(param, arg);
return 0;
}
static int pmic_gpio_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
unsigned long *configs, unsigned nconfs)
{
struct pmic_gpio_state *state = pinctrl_dev_get_drvdata(pctldev);
struct pmic_gpio_pad *pad;
unsigned param, arg;
unsigned int val;
int i, ret;
pad = pctldev->desc->pins[pin].drv_data;
for (i = 0; i < nconfs; i++) {
param = pinconf_to_config_param(configs[i]);
arg = pinconf_to_config_argument(configs[i]);
switch (param) {
case PIN_CONFIG_DRIVE_PUSH_PULL:
pad->buffer_type = PMIC_GPIO_OUT_BUF_CMOS;
break;
case PIN_CONFIG_DRIVE_OPEN_DRAIN:
if (!pad->have_buffer)
return -EINVAL;
pad->buffer_type = PMIC_GPIO_OUT_BUF_OPEN_DRAIN_NMOS;
break;
case PIN_CONFIG_DRIVE_OPEN_SOURCE:
if (!pad->have_buffer)
return -EINVAL;
pad->buffer_type = PMIC_GPIO_OUT_BUF_OPEN_DRAIN_PMOS;
break;
case PIN_CONFIG_BIAS_DISABLE:
pad->pullup = PMIC_GPIO_PULL_DISABLE;
break;
case PIN_CONFIG_BIAS_PULL_UP:
pad->pullup = PMIC_GPIO_PULL_UP_30;
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
if (arg)
pad->pullup = PMIC_GPIO_PULL_DOWN;
else
pad->pullup = PMIC_GPIO_PULL_DISABLE;
break;
case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
pad->is_enabled = false;
break;
case PIN_CONFIG_POWER_SOURCE:
if (arg > pad->num_sources)
return -EINVAL;
pad->power_source = arg;
break;
case PIN_CONFIG_INPUT_ENABLE:
pad->input_enabled = arg ? true : false;
break;
case PIN_CONFIG_OUTPUT:
pad->output_enabled = true;
pad->out_value = arg;
break;
case PMIC_GPIO_CONF_PULL_UP:
if (arg > PMIC_GPIO_PULL_UP_1P5_30)
return -EINVAL;
pad->pullup = arg;
break;
case PMIC_GPIO_CONF_STRENGTH:
if (arg > PMIC_GPIO_STRENGTH_LOW)
return -EINVAL;
pad->strength = arg;
break;
default:
return -EINVAL;
}
}
val = pad->power_source << PMIC_GPIO_REG_VIN_SHIFT;
ret = pmic_gpio_write(state, pad, PMIC_GPIO_REG_DIG_VIN_CTL, val);
if (ret < 0)
return ret;
val = pad->pullup << PMIC_GPIO_REG_PULL_SHIFT;
ret = pmic_gpio_write(state, pad, PMIC_GPIO_REG_DIG_PULL_CTL, val);
if (ret < 0)
return ret;
val = pad->buffer_type << PMIC_GPIO_REG_OUT_TYPE_SHIFT;
val = pad->strength << PMIC_GPIO_REG_OUT_STRENGTH_SHIFT;
ret = pmic_gpio_write(state, pad, PMIC_GPIO_REG_DIG_OUT_CTL, val);
if (ret < 0)
return ret;
val = 0;
if (pad->output_enabled) {
if (pad->input_enabled)
val = 2;
else
val = 1;
}
val = val << PMIC_GPIO_REG_MODE_DIR_SHIFT;
val |= pad->function << PMIC_GPIO_REG_MODE_FUNCTION_SHIFT;
val |= pad->out_value & PMIC_GPIO_REG_MODE_VALUE_SHIFT;
return pmic_gpio_write(state, pad, PMIC_GPIO_REG_MODE_CTL, val);
}
static void pmic_gpio_config_dbg_show(struct pinctrl_dev *pctldev,
struct seq_file *s, unsigned pin)
{
struct pmic_gpio_state *state = pinctrl_dev_get_drvdata(pctldev);
struct pmic_gpio_pad *pad;
int ret, val;
static const char *const biases[] = {
"pull-up 30uA", "pull-up 1.5uA", "pull-up 31.5uA",
"pull-up 1.5uA + 30uA boost", "pull-down 10uA", "no pull"
};
static const char *const buffer_types[] = {
"push-pull", "open-drain", "open-source"
};
static const char *const strengths[] = {
"no", "high", "medium", "low"
};
pad = pctldev->desc->pins[pin].drv_data;
seq_printf(s, " gpio%-2d:", pin + PMIC_GPIO_PHYSICAL_OFFSET);
val = pmic_gpio_read(state, pad, PMIC_GPIO_REG_EN_CTL);
if (val < 0 || !(val >> PMIC_GPIO_REG_MASTER_EN_SHIFT)) {
seq_puts(s, " ---");
} else {
if (!pad->input_enabled) {
ret = pmic_gpio_read(state, pad, PMIC_MPP_REG_RT_STS);
if (!ret) {
ret &= PMIC_MPP_REG_RT_STS_VAL_MASK;
pad->out_value = ret;
}
}
seq_printf(s, " %-4s", pad->output_enabled ? "out" : "in");
seq_printf(s, " %-7s", pmic_gpio_functions[pad->function]);
seq_printf(s, " vin-%d", pad->power_source);
seq_printf(s, " %-27s", biases[pad->pullup]);
seq_printf(s, " %-10s", buffer_types[pad->buffer_type]);
seq_printf(s, " %-4s", pad->out_value ? "high" : "low");
seq_printf(s, " %-7s", strengths[pad->strength]);
}
}
static const struct pinconf_ops pmic_gpio_pinconf_ops = {
.pin_config_group_get = pmic_gpio_config_get,
.pin_config_group_set = pmic_gpio_config_set,
.pin_config_group_dbg_show = pmic_gpio_config_dbg_show,
};
static int pmic_gpio_direction_input(struct gpio_chip *chip, unsigned pin)
{
struct pmic_gpio_state *state = to_gpio_state(chip);
unsigned long config;
config = pinconf_to_config_packed(PIN_CONFIG_INPUT_ENABLE, 1);
return pmic_gpio_config_set(state->ctrl, pin, &config, 1);
}
static int pmic_gpio_direction_output(struct gpio_chip *chip,
unsigned pin, int val)
{
struct pmic_gpio_state *state = to_gpio_state(chip);
unsigned long config;
config = pinconf_to_config_packed(PIN_CONFIG_OUTPUT, val);
return pmic_gpio_config_set(state->ctrl, pin, &config, 1);
}
static int pmic_gpio_get(struct gpio_chip *chip, unsigned pin)
{
struct pmic_gpio_state *state = to_gpio_state(chip);
struct pmic_gpio_pad *pad;
int ret;
pad = state->ctrl->desc->pins[pin].drv_data;
if (!pad->is_enabled)
return -EINVAL;
if (pad->input_enabled) {
ret = pmic_gpio_read(state, pad, PMIC_MPP_REG_RT_STS);
if (ret < 0)
return ret;
pad->out_value = ret & PMIC_MPP_REG_RT_STS_VAL_MASK;
}
return pad->out_value;
}
static void pmic_gpio_set(struct gpio_chip *chip, unsigned pin, int value)
{
struct pmic_gpio_state *state = to_gpio_state(chip);
unsigned long config;
config = pinconf_to_config_packed(PIN_CONFIG_OUTPUT, value);
pmic_gpio_config_set(state->ctrl, pin, &config, 1);
}
static int pmic_gpio_request(struct gpio_chip *chip, unsigned base)
{
return pinctrl_request_gpio(chip->base + base);
}
static void pmic_gpio_free(struct gpio_chip *chip, unsigned base)
{
pinctrl_free_gpio(chip->base + base);
}
static int pmic_gpio_of_xlate(struct gpio_chip *chip,
const struct of_phandle_args *gpio_desc,
u32 *flags)
{
if (chip->of_gpio_n_cells < 2)
return -EINVAL;
if (flags)
*flags = gpio_desc->args[1];
return gpio_desc->args[0] - PMIC_GPIO_PHYSICAL_OFFSET;
}
static int pmic_gpio_to_irq(struct gpio_chip *chip, unsigned pin)
{
struct pmic_gpio_state *state = to_gpio_state(chip);
struct pmic_gpio_pad *pad;
pad = state->ctrl->desc->pins[pin].drv_data;
return pad->irq;
}
static void pmic_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
{
struct pmic_gpio_state *state = to_gpio_state(chip);
unsigned i;
for (i = 0; i < chip->ngpio; i++) {
pmic_gpio_config_dbg_show(state->ctrl, s, i);
seq_puts(s, "\n");
}
}
static const struct gpio_chip pmic_gpio_gpio_template = {
.direction_input = pmic_gpio_direction_input,
.direction_output = pmic_gpio_direction_output,
.get = pmic_gpio_get,
.set = pmic_gpio_set,
.request = pmic_gpio_request,
.free = pmic_gpio_free,
.of_xlate = pmic_gpio_of_xlate,
.to_irq = pmic_gpio_to_irq,
.dbg_show = pmic_gpio_dbg_show,
};
static int pmic_gpio_populate(struct pmic_gpio_state *state,
struct pmic_gpio_pad *pad)
{
int type, subtype, val, dir;
type = pmic_gpio_read(state, pad, PMIC_GPIO_REG_TYPE);
if (type < 0)
return type;
if (type != PMIC_GPIO_TYPE) {
dev_err(state->dev, "incorrect block type 0x%x at 0x%x\n",
type, pad->base);
return -ENODEV;
}
subtype = pmic_gpio_read(state, pad, PMIC_GPIO_REG_SUBTYPE);
if (subtype < 0)
return subtype;
switch (subtype) {
case PMIC_GPIO_SUBTYPE_GPIO_4CH:
pad->have_buffer = true;
case PMIC_GPIO_SUBTYPE_GPIOC_4CH:
pad->num_sources = 4;
break;
case PMIC_GPIO_SUBTYPE_GPIO_8CH:
pad->have_buffer = true;
case PMIC_GPIO_SUBTYPE_GPIOC_8CH:
pad->num_sources = 8;
break;
default:
dev_err(state->dev, "unknown GPIO type 0x%x\n", subtype);
return -ENODEV;
}
val = pmic_gpio_read(state, pad, PMIC_GPIO_REG_MODE_CTL);
if (val < 0)
return val;
pad->out_value = val & PMIC_GPIO_REG_MODE_VALUE_SHIFT;
dir = val >> PMIC_GPIO_REG_MODE_DIR_SHIFT;
dir &= PMIC_GPIO_REG_MODE_DIR_MASK;
switch (dir) {
case 0:
pad->input_enabled = true;
pad->output_enabled = false;
break;
case 1:
pad->input_enabled = false;
pad->output_enabled = true;
break;
case 2:
pad->input_enabled = true;
pad->output_enabled = true;
break;
default:
dev_err(state->dev, "unknown GPIO direction\n");
return -ENODEV;
}
pad->function = val >> PMIC_GPIO_REG_MODE_FUNCTION_SHIFT;
pad->function &= PMIC_GPIO_REG_MODE_FUNCTION_MASK;
val = pmic_gpio_read(state, pad, PMIC_GPIO_REG_DIG_VIN_CTL);
if (val < 0)
return val;
pad->power_source = val >> PMIC_GPIO_REG_VIN_SHIFT;
pad->power_source &= PMIC_GPIO_REG_VIN_MASK;
val = pmic_gpio_read(state, pad, PMIC_GPIO_REG_DIG_PULL_CTL);
if (val < 0)
return val;
pad->pullup = val >> PMIC_GPIO_REG_PULL_SHIFT;
pad->pullup &= PMIC_GPIO_REG_PULL_MASK;
val = pmic_gpio_read(state, pad, PMIC_GPIO_REG_DIG_OUT_CTL);
if (val < 0)
return val;
pad->strength = val >> PMIC_GPIO_REG_OUT_STRENGTH_SHIFT;
pad->strength &= PMIC_GPIO_REG_OUT_STRENGTH_MASK;
pad->buffer_type = val >> PMIC_GPIO_REG_OUT_TYPE_SHIFT;
pad->buffer_type &= PMIC_GPIO_REG_OUT_TYPE_MASK;
/* Pin could be disabled with PIN_CONFIG_BIAS_HIGH_IMPEDANCE */
pad->is_enabled = true;
return 0;
}
static int pmic_gpio_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct pinctrl_pin_desc *pindesc;
struct pinctrl_desc *pctrldesc;
struct pmic_gpio_pad *pad, *pads;
struct pmic_gpio_state *state;
int ret, npins, i;
u32 res[2];
ret = of_property_read_u32_array(dev->of_node, "reg", res, 2);
if (ret < 0) {
dev_err(dev, "missing base address and/or range");
return ret;
}
npins = res[1] / PMIC_GPIO_ADDRESS_RANGE;
if (!npins)
return -EINVAL;
BUG_ON(npins > ARRAY_SIZE(pmic_gpio_groups));
state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL);
if (!state)
return -ENOMEM;
platform_set_drvdata(pdev, state);
state->dev = &pdev->dev;
state->map = dev_get_regmap(dev->parent, NULL);
pindesc = devm_kcalloc(dev, npins, sizeof(*pindesc), GFP_KERNEL);
if (!pindesc)
return -ENOMEM;
pads = devm_kcalloc(dev, npins, sizeof(*pads), GFP_KERNEL);
if (!pads)
return -ENOMEM;
pctrldesc = devm_kzalloc(dev, sizeof(*pctrldesc), GFP_KERNEL);
if (!pctrldesc)
return -ENOMEM;
pctrldesc->pctlops = &pmic_gpio_pinctrl_ops;
pctrldesc->pmxops = &pmic_gpio_pinmux_ops;
pctrldesc->confops = &pmic_gpio_pinconf_ops;
pctrldesc->owner = THIS_MODULE;
pctrldesc->name = dev_name(dev);
pctrldesc->pins = pindesc;
pctrldesc->npins = npins;
for (i = 0; i < npins; i++, pindesc++) {
pad = &pads[i];
pindesc->drv_data = pad;
pindesc->number = i;
pindesc->name = pmic_gpio_groups[i];
pad->irq = platform_get_irq(pdev, i);
if (pad->irq < 0)
return pad->irq;
pad->base = res[0] + i * PMIC_GPIO_ADDRESS_RANGE;
ret = pmic_gpio_populate(state, pad);
if (ret < 0)
return ret;
}
state->chip = pmic_gpio_gpio_template;
state->chip.dev = dev;
state->chip.base = -1;
state->chip.ngpio = npins;
state->chip.label = dev_name(dev);
state->chip.of_gpio_n_cells = 2;
state->chip.can_sleep = false;
state->ctrl = pinctrl_register(pctrldesc, dev, state);
if (!state->ctrl)
return -ENODEV;
ret = gpiochip_add(&state->chip);
if (ret) {
dev_err(state->dev, "can't add gpio chip\n");
goto err_chip;
}
ret = gpiochip_add_pin_range(&state->chip, dev_name(dev), 0, 0, npins);
if (ret) {
dev_err(dev, "failed to add pin range\n");
goto err_range;
}
return 0;
err_range:
gpiochip_remove(&state->chip);
err_chip:
pinctrl_unregister(state->ctrl);
return ret;
}
static int pmic_gpio_remove(struct platform_device *pdev)
{
struct pmic_gpio_state *state = platform_get_drvdata(pdev);
gpiochip_remove(&state->chip);
pinctrl_unregister(state->ctrl);
return 0;
}
static const struct of_device_id pmic_gpio_of_match[] = {
{ .compatible = "qcom,pm8941-gpio" }, /* 36 GPIO's */
{ .compatible = "qcom,pma8084-gpio" }, /* 22 GPIO's */
{ },
};
MODULE_DEVICE_TABLE(of, pmic_gpio_of_match);
static struct platform_driver pmic_gpio_driver = {
.driver = {
.name = "qcom-spmi-gpio",
.of_match_table = pmic_gpio_of_match,
},
.probe = pmic_gpio_probe,
.remove = pmic_gpio_remove,
};
module_platform_driver(pmic_gpio_driver);
MODULE_AUTHOR("Ivan T. Ivanov <iivanov@mm-sol.com>");
MODULE_DESCRIPTION("Qualcomm SPMI PMIC GPIO pin control driver");
MODULE_ALIAS("platform:qcom-spmi-gpio");
MODULE_LICENSE("GPL v2");