mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-15 21:30:43 +00:00
[SCSI] fusion: mpi header update - version 1.05.14
Here are the lastest mpi headers for mpt fusion driver, which defines the firmware to driver interface. Signed-off-by: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
This commit is contained in:
Eric Moore
James Bottomley
parent
86b9c4c16a
commit
eae225eb59
@ -1,12 +1,12 @@
|
||||
/*
|
||||
* Copyright (c) 2000-2005 LSI Logic Corporation.
|
||||
* Copyright (c) 2000-2006 LSI Logic Corporation.
|
||||
*
|
||||
*
|
||||
* Name: mpi.h
|
||||
* Title: MPI Message independent structures and definitions
|
||||
* Creation Date: July 27, 2000
|
||||
*
|
||||
* mpi.h Version: 01.05.11
|
||||
* mpi.h Version: 01.05.12
|
||||
*
|
||||
* Version History
|
||||
* ---------------
|
||||
@ -77,6 +77,7 @@
|
||||
* 08-03-05 01.05.09 Bumped MPI_HEADER_VERSION_UNIT.
|
||||
* 08-30-05 01.05.10 Added 2 new IOCStatus codes for Target.
|
||||
* 03-27-06 01.05.11 Bumped MPI_HEADER_VERSION_UNIT.
|
||||
* 10-11-06 01.05.12 Bumped MPI_HEADER_VERSION_UNIT.
|
||||
* --------------------------------------------------------------------------
|
||||
*/
|
||||
|
||||
@ -107,7 +108,7 @@
|
||||
/* Note: The major versions of 0xe0 through 0xff are reserved */
|
||||
|
||||
/* versioning for this MPI header set */
|
||||
#define MPI_HEADER_VERSION_UNIT (0x0D)
|
||||
#define MPI_HEADER_VERSION_UNIT (0x0E)
|
||||
#define MPI_HEADER_VERSION_DEV (0x00)
|
||||
#define MPI_HEADER_VERSION_UNIT_MASK (0xFF00)
|
||||
#define MPI_HEADER_VERSION_UNIT_SHIFT (8)
|
||||
|
||||
@ -1,12 +1,12 @@
|
||||
/*
|
||||
* Copyright (c) 2000-2005 LSI Logic Corporation.
|
||||
* Copyright (c) 2000-2006 LSI Logic Corporation.
|
||||
*
|
||||
*
|
||||
* Name: mpi_cnfg.h
|
||||
* Title: MPI Config message, structures, and Pages
|
||||
* Creation Date: July 27, 2000
|
||||
*
|
||||
* mpi_cnfg.h Version: 01.05.12
|
||||
* mpi_cnfg.h Version: 01.05.13
|
||||
*
|
||||
* Version History
|
||||
* ---------------
|
||||
@ -276,6 +276,23 @@
|
||||
* Added AdditionalControlFlags, MaxTargetPortConnectTime,
|
||||
* ReportDeviceMissingDelay, and IODeviceMissingDelay
|
||||
* fields to SAS IO Unit Page 1.
|
||||
* 10-11-06 01.05.13 Added NumForceWWID field and ForceWWID array to
|
||||
* Manufacturing Page 5.
|
||||
* Added Manufacturing pages 8 through 10.
|
||||
* Added defines for supported metadata size bits in
|
||||
* CapabilitiesFlags field of IOC Page 6.
|
||||
* Added defines for metadata size bits in VolumeSettings
|
||||
* field of RAID Volume Page 0.
|
||||
* Added SATA Link Reset settings, Enable SATA Asynchronous
|
||||
* Notification bit, and HideNonZeroAttachedPhyIdentifiers
|
||||
* bit to AdditionalControlFlags field of SAS IO Unit
|
||||
* Page 1.
|
||||
* Added defines for Enclosure Devices Unmapped and
|
||||
* Device Limit Exceeded bits in Status field of SAS IO
|
||||
* Unit Page 2.
|
||||
* Added more AccessStatus values for SAS Device Page 0.
|
||||
* Added bit for SATA Asynchronous Notification Support in
|
||||
* Flags field of SAS Device Page 0.
|
||||
* --------------------------------------------------------------------------
|
||||
*/
|
||||
|
||||
@ -654,17 +671,24 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_4
|
||||
#define MPI_MANPAGE4_IR_NO_MIX_SAS_SATA (0x01)
|
||||
|
||||
|
||||
#ifndef MPI_MANPAGE5_NUM_FORCEWWID
|
||||
#define MPI_MANPAGE5_NUM_FORCEWWID (1)
|
||||
#endif
|
||||
|
||||
typedef struct _CONFIG_PAGE_MANUFACTURING_5
|
||||
{
|
||||
CONFIG_PAGE_HEADER Header; /* 00h */
|
||||
U64 BaseWWID; /* 04h */
|
||||
U8 Flags; /* 0Ch */
|
||||
U8 Reserved1; /* 0Dh */
|
||||
U8 NumForceWWID; /* 0Dh */
|
||||
U16 Reserved2; /* 0Eh */
|
||||
U32 Reserved3; /* 10h */
|
||||
U32 Reserved4; /* 14h */
|
||||
U64 ForceWWID[MPI_MANPAGE5_NUM_FORCEWWID]; /* 18h */
|
||||
} CONFIG_PAGE_MANUFACTURING_5, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_5,
|
||||
ManufacturingPage5_t, MPI_POINTER pManufacturingPage5_t;
|
||||
|
||||
#define MPI_MANUFACTURING5_PAGEVERSION (0x01)
|
||||
#define MPI_MANUFACTURING5_PAGEVERSION (0x02)
|
||||
|
||||
/* defines for the Flags field */
|
||||
#define MPI_MANPAGE5_TWO_WWID_PER_PHY (0x01)
|
||||
@ -740,6 +764,36 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_7
|
||||
#define MPI_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001)
|
||||
|
||||
|
||||
typedef struct _CONFIG_PAGE_MANUFACTURING_8
|
||||
{
|
||||
CONFIG_PAGE_HEADER Header; /* 00h */
|
||||
U32 ProductSpecificInfo;/* 04h */
|
||||
} CONFIG_PAGE_MANUFACTURING_8, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_8,
|
||||
ManufacturingPage8_t, MPI_POINTER pManufacturingPage8_t;
|
||||
|
||||
#define MPI_MANUFACTURING8_PAGEVERSION (0x00)
|
||||
|
||||
|
||||
typedef struct _CONFIG_PAGE_MANUFACTURING_9
|
||||
{
|
||||
CONFIG_PAGE_HEADER Header; /* 00h */
|
||||
U32 ProductSpecificInfo;/* 04h */
|
||||
} CONFIG_PAGE_MANUFACTURING_9, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_9,
|
||||
ManufacturingPage9_t, MPI_POINTER pManufacturingPage9_t;
|
||||
|
||||
#define MPI_MANUFACTURING6_PAGEVERSION (0x00)
|
||||
|
||||
|
||||
typedef struct _CONFIG_PAGE_MANUFACTURING_10
|
||||
{
|
||||
CONFIG_PAGE_HEADER Header; /* 00h */
|
||||
U32 ProductSpecificInfo;/* 04h */
|
||||
} CONFIG_PAGE_MANUFACTURING_10, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_10,
|
||||
ManufacturingPage10_t, MPI_POINTER pManufacturingPage10_t;
|
||||
|
||||
#define MPI_MANUFACTURING10_PAGEVERSION (0x00)
|
||||
|
||||
|
||||
/****************************************************************************
|
||||
* IO Unit Config Pages
|
||||
****************************************************************************/
|
||||
@ -1080,10 +1134,14 @@ typedef struct _CONFIG_PAGE_IOC_6
|
||||
} CONFIG_PAGE_IOC_6, MPI_POINTER PTR_CONFIG_PAGE_IOC_6,
|
||||
IOCPage6_t, MPI_POINTER pIOCPage6_t;
|
||||
|
||||
#define MPI_IOCPAGE6_PAGEVERSION (0x00)
|
||||
#define MPI_IOCPAGE6_PAGEVERSION (0x01)
|
||||
|
||||
/* IOC Page 6 Capabilities Flags */
|
||||
|
||||
#define MPI_IOCPAGE6_CAP_FLAGS_MASK_METADATA_SIZE (0x00000006)
|
||||
#define MPI_IOCPAGE6_CAP_FLAGS_64MB_METADATA_SIZE (0x00000000)
|
||||
#define MPI_IOCPAGE6_CAP_FLAGS_512MB_METADATA_SIZE (0x00000002)
|
||||
|
||||
#define MPI_IOCPAGE6_CAP_FLAGS_GLOBAL_HOT_SPARE (0x00000001)
|
||||
|
||||
|
||||
@ -2160,6 +2218,11 @@ typedef struct _RAID_VOL0_SETTINGS
|
||||
#define MPI_RAIDVOL0_SETTING_AUTO_CONFIGURE (0x0004)
|
||||
#define MPI_RAIDVOL0_SETTING_PRIORITY_RESYNC (0x0008)
|
||||
#define MPI_RAIDVOL0_SETTING_FAST_DATA_SCRUBBING_0102 (0x0020) /* obsolete */
|
||||
|
||||
#define MPI_RAIDVOL0_SETTING_MASK_METADATA_SIZE (0x00C0)
|
||||
#define MPI_RAIDVOL0_SETTING_64MB_METADATA_SIZE (0x0000)
|
||||
#define MPI_RAIDVOL0_SETTING_512MB_METADATA_SIZE (0x0040)
|
||||
|
||||
#define MPI_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX (0x0010)
|
||||
#define MPI_RAIDVOL0_SETTING_USE_DEFAULTS (0x8000)
|
||||
|
||||
@ -2203,7 +2266,7 @@ typedef struct _CONFIG_PAGE_RAID_VOL_0
|
||||
} CONFIG_PAGE_RAID_VOL_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_VOL_0,
|
||||
RaidVolumePage0_t, MPI_POINTER pRaidVolumePage0_t;
|
||||
|
||||
#define MPI_RAIDVOLPAGE0_PAGEVERSION (0x06)
|
||||
#define MPI_RAIDVOLPAGE0_PAGEVERSION (0x07)
|
||||
|
||||
/* values for RAID Volume Page 0 InactiveStatus field */
|
||||
#define MPI_RAIDVOLPAGE0_UNKNOWN_INACTIVE (0x00)
|
||||
@ -2518,7 +2581,7 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_1
|
||||
} CONFIG_PAGE_SAS_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_1,
|
||||
SasIOUnitPage1_t, MPI_POINTER pSasIOUnitPage1_t;
|
||||
|
||||
#define MPI_SASIOUNITPAGE1_PAGEVERSION (0x06)
|
||||
#define MPI_SASIOUNITPAGE1_PAGEVERSION (0x07)
|
||||
|
||||
/* values for SAS IO Unit Page 1 ControlFlags */
|
||||
#define MPI_SAS_IOUNIT1_CONTROL_DEVICE_SELF_TEST (0x8000)
|
||||
@ -2544,7 +2607,13 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_1
|
||||
#define MPI_SAS_IOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001)
|
||||
|
||||
/* values for SAS IO Unit Page 1 AdditionalControlFlags */
|
||||
#define MPI_SAS_IOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE (0x0001)
|
||||
#define MPI_SAS_IOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION (0x0040)
|
||||
#define MPI_SAS_IOUNIT1_ACONTROL_HIDE_NONZERO_ATTACHED_PHY_IDENT (0x0020)
|
||||
#define MPI_SAS_IOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET (0x0010)
|
||||
#define MPI_SAS_IOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET (0x0008)
|
||||
#define MPI_SAS_IOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET (0x0004)
|
||||
#define MPI_SAS_IOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET (0x0002)
|
||||
#define MPI_SAS_IOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE (0x0001)
|
||||
|
||||
/* defines for SAS IO Unit Page 1 ReportDeviceMissingDelay */
|
||||
#define MPI_SAS_IOUNIT1_REPORT_MISSING_TIMEOUT_MASK (0x7F)
|
||||
@ -2585,9 +2654,11 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_2
|
||||
} CONFIG_PAGE_SAS_IO_UNIT_2, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_2,
|
||||
SasIOUnitPage2_t, MPI_POINTER pSasIOUnitPage2_t;
|
||||
|
||||
#define MPI_SASIOUNITPAGE2_PAGEVERSION (0x05)
|
||||
#define MPI_SASIOUNITPAGE2_PAGEVERSION (0x06)
|
||||
|
||||
/* values for SAS IO Unit Page 2 Status field */
|
||||
#define MPI_SAS_IOUNIT2_STATUS_DEVICE_LIMIT_EXCEEDED (0x08)
|
||||
#define MPI_SAS_IOUNIT2_STATUS_ENCLOSURE_DEVICES_UNMAPPED (0x04)
|
||||
#define MPI_SAS_IOUNIT2_STATUS_DISABLED_PERSISTENT_MAPPINGS (0x02)
|
||||
#define MPI_SAS_IOUNIT2_STATUS_FULL_PERSISTENT_MAPPINGS (0x01)
|
||||
|
||||
@ -2739,24 +2810,38 @@ typedef struct _CONFIG_PAGE_SAS_DEVICE_0
|
||||
} CONFIG_PAGE_SAS_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_DEVICE_0,
|
||||
SasDevicePage0_t, MPI_POINTER pSasDevicePage0_t;
|
||||
|
||||
#define MPI_SASDEVICE0_PAGEVERSION (0x04)
|
||||
#define MPI_SASDEVICE0_PAGEVERSION (0x05)
|
||||
|
||||
/* values for SAS Device Page 0 AccessStatus field */
|
||||
#define MPI_SAS_DEVICE0_ASTATUS_NO_ERRORS (0x00)
|
||||
#define MPI_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED (0x01)
|
||||
#define MPI_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED (0x02)
|
||||
#define MPI_SAS_DEVICE0_ASTATUS_NO_ERRORS (0x00)
|
||||
#define MPI_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED (0x01)
|
||||
#define MPI_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED (0x02)
|
||||
#define MPI_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT (0x03)
|
||||
/* specific values for SATA Init failures */
|
||||
#define MPI_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN (0x10)
|
||||
#define MPI_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT (0x11)
|
||||
#define MPI_SAS_DEVICE0_ASTATUS_SIF_DIAG (0x12)
|
||||
#define MPI_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION (0x13)
|
||||
#define MPI_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER (0x14)
|
||||
#define MPI_SAS_DEVICE0_ASTATUS_SIF_PIO_SN (0x15)
|
||||
#define MPI_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN (0x16)
|
||||
#define MPI_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN (0x17)
|
||||
#define MPI_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION (0x18)
|
||||
#define MPI_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE (0x19)
|
||||
#define MPI_SAS_DEVICE0_ASTATUS_SIF_MAX (0x1F)
|
||||
|
||||
/* values for SAS Device Page 0 Flags field */
|
||||
#define MPI_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE (0x0200)
|
||||
#define MPI_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE (0x0100)
|
||||
#define MPI_SAS_DEVICE0_FLAGS_SATA_48BIT_LBA_SUPPORTED (0x0080)
|
||||
#define MPI_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED (0x0040)
|
||||
#define MPI_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED (0x0020)
|
||||
#define MPI_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED (0x0010)
|
||||
#define MPI_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH (0x0008)
|
||||
#define MPI_SAS_DEVICE0_FLAGS_MAPPING_PERSISTENT (0x0004)
|
||||
#define MPI_SAS_DEVICE0_FLAGS_DEVICE_MAPPED (0x0002)
|
||||
#define MPI_SAS_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001)
|
||||
#define MPI_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY (0x0400)
|
||||
#define MPI_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE (0x0200)
|
||||
#define MPI_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE (0x0100)
|
||||
#define MPI_SAS_DEVICE0_FLAGS_SATA_48BIT_LBA_SUPPORTED (0x0080)
|
||||
#define MPI_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED (0x0040)
|
||||
#define MPI_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED (0x0020)
|
||||
#define MPI_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED (0x0010)
|
||||
#define MPI_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH (0x0008)
|
||||
#define MPI_SAS_DEVICE0_FLAGS_MAPPING_PERSISTENT (0x0004)
|
||||
#define MPI_SAS_DEVICE0_FLAGS_DEVICE_MAPPED (0x0002)
|
||||
#define MPI_SAS_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001)
|
||||
|
||||
/* see mpi_sas.h for values for SAS Device Page 0 DeviceInfo values */
|
||||
|
||||
|
||||
@ -3,28 +3,28 @@
|
||||
MPI Header File Change History
|
||||
==============================
|
||||
|
||||
Copyright (c) 2000-2005 LSI Logic Corporation.
|
||||
Copyright (c) 2000-2006 LSI Logic Corporation.
|
||||
|
||||
---------------------------------------
|
||||
Header Set Release Version: 01.05.13
|
||||
Header Set Release Date: 03-27-06
|
||||
Header Set Release Version: 01.05.14
|
||||
Header Set Release Date: 10-11-06
|
||||
---------------------------------------
|
||||
|
||||
Filename Current version Prior version
|
||||
---------- --------------- -------------
|
||||
mpi.h 01.05.11 01.05.10
|
||||
mpi_ioc.h 01.05.11 01.05.10
|
||||
mpi_cnfg.h 01.05.12 01.05.11
|
||||
mpi_init.h 01.05.07 01.05.06
|
||||
mpi_targ.h 01.05.06 01.05.05
|
||||
mpi.h 01.05.12 01.05.11
|
||||
mpi_ioc.h 01.05.12 01.05.11
|
||||
mpi_cnfg.h 01.05.13 01.05.12
|
||||
mpi_init.h 01.05.08 01.05.07
|
||||
mpi_targ.h 01.05.06 01.05.06
|
||||
mpi_fc.h 01.05.01 01.05.01
|
||||
mpi_lan.h 01.05.01 01.05.01
|
||||
mpi_raid.h 01.05.02 01.05.02
|
||||
mpi_tool.h 01.05.03 01.05.03
|
||||
mpi_inb.h 01.05.01 01.05.01
|
||||
mpi_sas.h 01.05.03 01.05.02
|
||||
mpi_sas.h 01.05.04 01.05.03
|
||||
mpi_type.h 01.05.02 01.05.02
|
||||
mpi_history.txt 01.05.13 01.05.12
|
||||
mpi_history.txt 01.05.14 01.05.13
|
||||
|
||||
|
||||
* Date Version Description
|
||||
@ -94,6 +94,7 @@ mpi.h
|
||||
* 08-03-05 01.05.09 Bumped MPI_HEADER_VERSION_UNIT.
|
||||
* 08-30-05 01.05.10 Added 2 new IOCStatus codes for Target.
|
||||
* 03-27-06 01.05.11 Bumped MPI_HEADER_VERSION_UNIT.
|
||||
* 10-11-06 01.05.12 Bumped MPI_HEADER_VERSION_UNIT.
|
||||
* --------------------------------------------------------------------------
|
||||
|
||||
mpi_ioc.h
|
||||
@ -182,6 +183,14 @@ mpi_ioc.h
|
||||
* Added MPI_EVENT_SAS_INIT_TABLE_OVERFLOW and event
|
||||
* data structure.
|
||||
* Added MPI_EXT_IMAGE_TYPE_INITIALIZATION.
|
||||
* 10-11-06 01.05.12 Added MPI_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED.
|
||||
* Added MaxInitiators field to PortFacts reply.
|
||||
* Added SAS Device Status Change ReasonCode for
|
||||
* asynchronous notificaiton.
|
||||
* Added MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE and event
|
||||
* data structure.
|
||||
* Added new ImageType values for FWDownload and FWUpload
|
||||
* requests.
|
||||
* --------------------------------------------------------------------------
|
||||
|
||||
mpi_cnfg.h
|
||||
@ -447,6 +456,23 @@ mpi_cnfg.h
|
||||
* Added AdditionalControlFlags, MaxTargetPortConnectTime,
|
||||
* ReportDeviceMissingDelay, and IODeviceMissingDelay
|
||||
* fields to SAS IO Unit Page 1.
|
||||
* 10-11-06 01.05.13 Added NumForceWWID field and ForceWWID array to
|
||||
* Manufacturing Page 5.
|
||||
* Added Manufacturing pages 8 through 10.
|
||||
* Added defines for supported metadata size bits in
|
||||
* CapabilitiesFlags field of IOC Page 6.
|
||||
* Added defines for metadata size bits in VolumeSettings
|
||||
* field of RAID Volume Page 0.
|
||||
* Added SATA Link Reset settings, Enable SATA Asynchronous
|
||||
* Notification bit, and HideNonZeroAttachedPhyIdentifiers
|
||||
* bit to AdditionalControlFlags field of SAS IO Unit
|
||||
* Page 1.
|
||||
* Added defines for Enclosure Devices Unmapped and
|
||||
* Device Limit Exceeded bits in Status field of SAS IO
|
||||
* Unit Page 2.
|
||||
* Added more AccessStatus values for SAS Device Page 0.
|
||||
* Added bit for SATA Asynchronous Notification Support in
|
||||
* Flags field of SAS Device Page 0.
|
||||
* --------------------------------------------------------------------------
|
||||
|
||||
mpi_init.h
|
||||
@ -490,6 +516,7 @@ mpi_init.h
|
||||
* 08-03-05 01.05.06 Fixed some MPI_SCSIIO32_MSGFLGS_ defines to make them
|
||||
* unique in the first 32 characters.
|
||||
* 03-27-06 01.05.07 Added Task Management type of Clear ACA.
|
||||
* 10-11-06 01.05.08 Shortened define for Task Management type of Clear ACA.
|
||||
* --------------------------------------------------------------------------
|
||||
|
||||
mpi_targ.h
|
||||
@ -638,6 +665,8 @@ mpi_sas.h
|
||||
* and Remove Device operations to SAS IO Unit Control.
|
||||
* Added DevHandle field to SAS IO Unit Control request and
|
||||
* reply.
|
||||
* 10-11-06 01.05.04 Fixed the name of a define for Operation field of SAS IO
|
||||
* Unit Control request.
|
||||
* --------------------------------------------------------------------------
|
||||
|
||||
mpi_type.h
|
||||
@ -653,20 +682,20 @@ mpi_type.h
|
||||
|
||||
mpi_history.txt Parts list history
|
||||
|
||||
Filename 01.05.13 01.05.12 01.05.11 01.05.10 01.05.09
|
||||
---------- -------- -------- -------- -------- --------
|
||||
mpi.h 01.05.11 01.05.10 01.05.09 01.05.08 01.05.07
|
||||
mpi_ioc.h 01.05.11 01.05.10 01.05.09 01.05.09 01.05.08
|
||||
mpi_cnfg.h 01.05.12 01.05.11 01.05.10 01.05.09 01.05.08
|
||||
mpi_init.h 01.05.07 01.05.06 01.05.06 01.05.05 01.05.04
|
||||
mpi_targ.h 01.05.06 01.05.05 01.05.05 01.05.05 01.05.04
|
||||
mpi_fc.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
|
||||
mpi_lan.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
|
||||
mpi_raid.h 01.05.02 01.05.02 01.05.02 01.05.02 01.05.02
|
||||
mpi_tool.h 01.05.03 01.05.03 01.05.03 01.05.03 01.05.03
|
||||
mpi_inb.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
|
||||
mpi_sas.h 01.05.03 01.05.02 01.05.01 01.05.01 01.05.01
|
||||
mpi_type.h 01.05.02 01.05.02 01.05.01 01.05.01 01.05.01
|
||||
Filename 01.05.13 01.05.13 01.05.12 01.05.11 01.05.10 01.05.09
|
||||
---------- -------- -------- -------- -------- -------- --------
|
||||
mpi.h 01.05.12 01.05.11 01.05.10 01.05.09 01.05.08 01.05.07
|
||||
mpi_ioc.h 01.05.12 01.05.11 01.05.10 01.05.09 01.05.09 01.05.08
|
||||
mpi_cnfg.h 01.05.13 01.05.12 01.05.11 01.05.10 01.05.09 01.05.08
|
||||
mpi_init.h 01.05.08 01.05.07 01.05.06 01.05.06 01.05.05 01.05.04
|
||||
mpi_targ.h 01.05.06 01.05.06 01.05.05 01.05.05 01.05.05 01.05.04
|
||||
mpi_fc.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
|
||||
mpi_lan.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
|
||||
mpi_raid.h 01.05.02 01.05.02 01.05.02 01.05.02 01.05.02 01.05.02
|
||||
mpi_tool.h 01.05.03 01.05.03 01.05.03 01.05.03 01.05.03 01.05.03
|
||||
mpi_inb.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
|
||||
mpi_sas.h 01.05.04 01.05.03 01.05.02 01.05.01 01.05.01 01.05.01
|
||||
mpi_type.h 01.05.02 01.05.02 01.05.02 01.05.01 01.05.01 01.05.01
|
||||
|
||||
Filename 01.05.08 01.05.07 01.05.06 01.05.05 01.05.04 01.05.03
|
||||
---------- -------- -------- -------- -------- -------- --------
|
||||
|
||||
@ -1,12 +1,12 @@
|
||||
/*
|
||||
* Copyright (c) 2000-2005 LSI Logic Corporation.
|
||||
* Copyright (c) 2000-2006 LSI Logic Corporation.
|
||||
*
|
||||
*
|
||||
* Name: mpi_init.h
|
||||
* Title: MPI initiator mode messages and structures
|
||||
* Creation Date: June 8, 2000
|
||||
*
|
||||
* mpi_init.h Version: 01.05.07
|
||||
* mpi_init.h Version: 01.05.08
|
||||
*
|
||||
* Version History
|
||||
* ---------------
|
||||
@ -53,6 +53,7 @@
|
||||
* 08-03-05 01.05.06 Fixed some MPI_SCSIIO32_MSGFLGS_ defines to make them
|
||||
* unique in the first 32 characters.
|
||||
* 03-27-06 01.05.07 Added Task Management type of Clear ACA.
|
||||
* 10-11-06 01.05.08 Shortened define for Task Management type of Clear ACA.
|
||||
* --------------------------------------------------------------------------
|
||||
*/
|
||||
|
||||
@ -428,7 +429,7 @@ typedef struct _MSG_SCSI_TASK_MGMT
|
||||
#define MPI_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05)
|
||||
#define MPI_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06)
|
||||
#define MPI_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07)
|
||||
#define MPI_SCSITASKMGMT_TASKTYPE_CLEAR_ACA (0x08)
|
||||
#define MPI_SCSITASKMGMT_TASKTYPE_CLR_ACA (0x08)
|
||||
|
||||
/* MsgFlags bits */
|
||||
#define MPI_SCSITASKMGMT_MSGFLAGS_TARGET_RESET_OPTION (0x00)
|
||||
|
||||
@ -1,12 +1,12 @@
|
||||
/*
|
||||
* Copyright (c) 2000-2005 LSI Logic Corporation.
|
||||
* Copyright (c) 2000-2006 LSI Logic Corporation.
|
||||
*
|
||||
*
|
||||
* Name: mpi_ioc.h
|
||||
* Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
|
||||
* Creation Date: August 11, 2000
|
||||
*
|
||||
* mpi_ioc.h Version: 01.05.11
|
||||
* mpi_ioc.h Version: 01.05.12
|
||||
*
|
||||
* Version History
|
||||
* ---------------
|
||||
@ -98,6 +98,14 @@
|
||||
* Added MPI_EVENT_SAS_INIT_TABLE_OVERFLOW and event
|
||||
* data structure.
|
||||
* Added MPI_EXT_IMAGE_TYPE_INITIALIZATION.
|
||||
* 10-11-06 01.05.12 Added MPI_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED.
|
||||
* Added MaxInitiators field to PortFacts reply.
|
||||
* Added SAS Device Status Change ReasonCode for
|
||||
* asynchronous notificaiton.
|
||||
* Added MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE and event
|
||||
* data structure.
|
||||
* Added new ImageType values for FWDownload and FWUpload
|
||||
* requests.
|
||||
* --------------------------------------------------------------------------
|
||||
*/
|
||||
|
||||
@ -264,6 +272,7 @@ typedef struct _MSG_IOC_FACTS_REPLY
|
||||
#define MPI_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID (0x0002)
|
||||
#define MPI_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0004)
|
||||
#define MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL (0x0008)
|
||||
#define MPI_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED (0x0010)
|
||||
|
||||
#define MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT (0x01)
|
||||
#define MPI_IOCFACTS_FLAGS_REPLY_FIFO_HOST_SIGNAL (0x02)
|
||||
@ -328,7 +337,8 @@ typedef struct _MSG_PORT_FACTS_REPLY
|
||||
U16 MaxPostedCmdBuffers; /* 1Ch */
|
||||
U16 MaxPersistentIDs; /* 1Eh */
|
||||
U16 MaxLanBuckets; /* 20h */
|
||||
U16 Reserved4; /* 22h */
|
||||
U8 MaxInitiators; /* 22h */
|
||||
U8 Reserved4; /* 23h */
|
||||
U32 Reserved5; /* 24h */
|
||||
} MSG_PORT_FACTS_REPLY, MPI_POINTER PTR_MSG_PORT_FACTS_REPLY,
|
||||
PortFactsReply_t, MPI_POINTER pPortFactsReply_t;
|
||||
@ -487,6 +497,7 @@ typedef struct _MSG_EVENT_ACK_REPLY
|
||||
#define MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE (0x00000018)
|
||||
#define MPI_EVENT_SAS_INIT_TABLE_OVERFLOW (0x00000019)
|
||||
#define MPI_EVENT_SAS_SMP_ERROR (0x0000001A)
|
||||
#define MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE (0x0000001B)
|
||||
#define MPI_EVENT_LOG_ENTRY_ADDED (0x00000021)
|
||||
|
||||
/* AckRequired field values */
|
||||
@ -593,6 +604,7 @@ typedef struct _EVENT_DATA_SAS_DEVICE_STATUS_CHANGE
|
||||
#define MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A)
|
||||
#define MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B)
|
||||
#define MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C)
|
||||
#define MPI_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION (0x0D)
|
||||
|
||||
|
||||
/* SCSI Event data for Queue Full event */
|
||||
@ -895,6 +907,54 @@ typedef struct _EVENT_DATA_SAS_INIT_TABLE_OVERFLOW
|
||||
MpiEventDataSasInitTableOverflow_t,
|
||||
MPI_POINTER pMpiEventDataSasInitTableOverflow_t;
|
||||
|
||||
/* SAS Expander Status Change Event data */
|
||||
|
||||
typedef struct _EVENT_DATA_SAS_EXPANDER_STATUS_CHANGE
|
||||
{
|
||||
U8 ReasonCode; /* 00h */
|
||||
U8 Reserved1; /* 01h */
|
||||
U16 Reserved2; /* 02h */
|
||||
U8 PhysicalPort; /* 04h */
|
||||
U8 Reserved3; /* 05h */
|
||||
U16 EnclosureHandle; /* 06h */
|
||||
U64 SASAddress; /* 08h */
|
||||
U32 DiscoveryStatus; /* 10h */
|
||||
U16 DevHandle; /* 14h */
|
||||
U16 ParentDevHandle; /* 16h */
|
||||
U16 ExpanderChangeCount; /* 18h */
|
||||
U16 ExpanderRouteIndexes; /* 1Ah */
|
||||
U8 NumPhys; /* 1Ch */
|
||||
U8 SASLevel; /* 1Dh */
|
||||
U8 Flags; /* 1Eh */
|
||||
U8 Reserved4; /* 1Fh */
|
||||
} EVENT_DATA_SAS_EXPANDER_STATUS_CHANGE,
|
||||
MPI_POINTER PTR_EVENT_DATA_SAS_EXPANDER_STATUS_CHANGE,
|
||||
MpiEventDataSasExpanderStatusChange_t,
|
||||
MPI_POINTER pMpiEventDataSasExpanderStatusChange_t;
|
||||
|
||||
/* values for ReasonCode field of SAS Expander Status Change Event data */
|
||||
#define MPI_EVENT_SAS_EXP_RC_ADDED (0x00)
|
||||
#define MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING (0x01)
|
||||
|
||||
/* values for DiscoveryStatus field of SAS Expander Status Change Event data */
|
||||
#define MPI_EVENT_SAS_EXP_DS_LOOP_DETECTED (0x00000001)
|
||||
#define MPI_EVENT_SAS_EXP_DS_UNADDRESSABLE_DEVICE (0x00000002)
|
||||
#define MPI_EVENT_SAS_EXP_DS_MULTIPLE_PORTS (0x00000004)
|
||||
#define MPI_EVENT_SAS_EXP_DS_EXPANDER_ERR (0x00000008)
|
||||
#define MPI_EVENT_SAS_EXP_DS_SMP_TIMEOUT (0x00000010)
|
||||
#define MPI_EVENT_SAS_EXP_DS_OUT_ROUTE_ENTRIES (0x00000020)
|
||||
#define MPI_EVENT_SAS_EXP_DS_INDEX_NOT_EXIST (0x00000040)
|
||||
#define MPI_EVENT_SAS_EXP_DS_SMP_FUNCTION_FAILED (0x00000080)
|
||||
#define MPI_EVENT_SAS_EXP_DS_SMP_CRC_ERROR (0x00000100)
|
||||
#define MPI_EVENT_SAS_EXP_DS_SUBTRACTIVE_LINK (0x00000200)
|
||||
#define MPI_EVENT_SAS_EXP_DS_TABLE_LINK (0x00000400)
|
||||
#define MPI_EVENT_SAS_EXP_DS_UNSUPPORTED_DEVICE (0x00000800)
|
||||
|
||||
/* values for Flags field of SAS Expander Status Change Event data */
|
||||
#define MPI_EVENT_SAS_EXP_FLAGS_ROUTE_TABLE_CONFIG (0x02)
|
||||
#define MPI_EVENT_SAS_EXP_FLAGS_CONFIG_IN_PROGRESS (0x01)
|
||||
|
||||
|
||||
|
||||
/*****************************************************************************
|
||||
*
|
||||
@ -926,6 +986,10 @@ typedef struct _MSG_FW_DOWNLOAD
|
||||
#define MPI_FW_DOWNLOAD_ITYPE_BIOS (0x02)
|
||||
#define MPI_FW_DOWNLOAD_ITYPE_NVDATA (0x03)
|
||||
#define MPI_FW_DOWNLOAD_ITYPE_BOOTLOADER (0x04)
|
||||
#define MPI_FW_DOWNLOAD_ITYPE_MANUFACTURING (0x06)
|
||||
#define MPI_FW_DOWNLOAD_ITYPE_CONFIG_1 (0x07)
|
||||
#define MPI_FW_DOWNLOAD_ITYPE_CONFIG_2 (0x08)
|
||||
#define MPI_FW_DOWNLOAD_ITYPE_MEGARAID (0x09)
|
||||
|
||||
|
||||
typedef struct _FWDownloadTCSGE
|
||||
@ -980,6 +1044,11 @@ typedef struct _MSG_FW_UPLOAD
|
||||
#define MPI_FW_UPLOAD_ITYPE_NVDATA (0x03)
|
||||
#define MPI_FW_UPLOAD_ITYPE_BOOTLOADER (0x04)
|
||||
#define MPI_FW_UPLOAD_ITYPE_FW_BACKUP (0x05)
|
||||
#define MPI_FW_UPLOAD_ITYPE_MANUFACTURING (0x06)
|
||||
#define MPI_FW_UPLOAD_ITYPE_CONFIG_1 (0x07)
|
||||
#define MPI_FW_UPLOAD_ITYPE_CONFIG_2 (0x08)
|
||||
#define MPI_FW_UPLOAD_ITYPE_MEGARAID (0x09)
|
||||
#define MPI_FW_UPLOAD_ITYPE_COMPLETE (0x0A)
|
||||
|
||||
typedef struct _FWUploadTCSGE
|
||||
{
|
||||
|
||||
@ -1,4 +1,3 @@
|
||||
|
||||
/***************************************************************************
|
||||
* *
|
||||
* Copyright 2003 LSI Logic Corporation. All rights reserved. *
|
||||
@ -14,7 +13,7 @@
|
||||
#define IOPI_IOCLOGINFO_H_INCLUDED
|
||||
|
||||
#define SAS_LOGINFO_NEXUS_LOSS 0x31170000
|
||||
#define SAS_LOGINFO_MASK 0xFFFF0000
|
||||
#define SAS_LOGINFO_MASK 0xFFFF0000
|
||||
|
||||
/****************************************************************************/
|
||||
/* IOC LOGINFO defines, 0x00000000 - 0x0FFFFFFF */
|
||||
@ -43,129 +42,172 @@
|
||||
/****************************************************************************/
|
||||
/* IOP LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = IOP */
|
||||
/****************************************************************************/
|
||||
#define IOP_LOGINFO_CODE_INVALID_SAS_ADDRESS (0x00010000)
|
||||
#define IOP_LOGINFO_CODE_UNUSED2 (0x00020000)
|
||||
#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE (0x00030000)
|
||||
#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_RT (0x00030100) /* Route Table Entry not found */
|
||||
#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PN (0x00030200) /* Invalid Page Number */
|
||||
#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_FORM (0x00030300) /* Invalid FORM */
|
||||
#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PT (0x00030400) /* Invalid Page Type */
|
||||
#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DNM (0x00030500) /* Device Not Mapped */
|
||||
#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PERSIST (0x00030600) /* Persistent Page not found */
|
||||
#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DEFAULT (0x00030700) /* Default Page not found */
|
||||
#define IOP_LOGINFO_CODE_INVALID_SAS_ADDRESS (0x00010000)
|
||||
#define IOP_LOGINFO_CODE_UNUSED2 (0x00020000)
|
||||
#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE (0x00030000)
|
||||
#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_RT (0x00030100) /* Route Table Entry not found */
|
||||
#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PN (0x00030200) /* Invalid Page Number */
|
||||
#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_FORM (0x00030300) /* Invalid FORM */
|
||||
#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PT (0x00030400) /* Invalid Page Type */
|
||||
#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DNM (0x00030500) /* Device Not Mapped */
|
||||
#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PERSIST (0x00030600) /* Persistent Page not found */
|
||||
#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DEFAULT (0x00030700) /* Default Page not found */
|
||||
|
||||
#define IOP_LOGINFO_CODE_DIAG_MSG_ERROR (0x00040000) /* Error handling diag msg - or'd with diag status */
|
||||
#define IOP_LOGINFO_CODE_FWUPLOAD_NO_FLASH_AVAILABLE (0x0003E000) /* Tried to upload from flash, but there is none */
|
||||
#define IOP_LOGINFO_CODE_FWUPLOAD_UNKNOWN_IMAGE_TYPE (0x0003E001) /* ImageType field contents were invalid */
|
||||
#define IOP_LOGINFO_CODE_FWUPLOAD_WRONG_IMAGE_SIZE (0x0003E002) /* ImageSize field in TCSGE was bad/offset in MfgPg 4 was wrong */
|
||||
#define IOP_LOGINFO_CODE_FWUPLOAD_ENTIRE_FLASH_UPLOAD_FAILED (0x0003E003) /* Error occured while attempting to upload the entire flash */
|
||||
#define IOP_LOGINFO_CODE_FWUPLOAD_REGION_UPLOAD_FAILED (0x0003E004) /* Error occured while attempting to upload single flash region */
|
||||
#define IOP_LOGINFO_CODE_FWUPLOAD_DMA_FAILURE (0x0003E005) /* Problem occured while DMAing FW to host memory */
|
||||
|
||||
#define IOP_LOGINFO_CODE_TASK_TERMINATED (0x00050000)
|
||||
#define IOP_LOGINFO_CODE_DIAG_MSG_ERROR (0x00040000) /* Error handling diag msg - or'd with diag status */
|
||||
|
||||
#define IOP_LOGINFO_CODE_ENCL_MGMT_READ_ACTION_ERR0R (0x00060001) /* Read Action not supported for SEP msg */
|
||||
#define IOP_LOGINFO_CODE_ENCL_MGMT_INVALID_BUS_ID_ERR0R (0x00060002) /* Invalid Bus/ID in SEP msg */
|
||||
#define IOP_LOGINFO_CODE_TASK_TERMINATED (0x00050000)
|
||||
|
||||
#define IOP_LOGINFO_CODE_TARGET_ASSIST_TERMINATED (0x00070001)
|
||||
#define IOP_LOGINFO_CODE_TARGET_STATUS_SEND_TERMINATED (0x00070002)
|
||||
#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_ALL_IO (0x00070003)
|
||||
#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO (0x00070004)
|
||||
#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO_REQ (0x00070005)
|
||||
#define IOP_LOGINFO_CODE_ENCL_MGMT_READ_ACTION_ERR0R (0x00060001) /* Read Action not supported for SEP msg */
|
||||
#define IOP_LOGINFO_CODE_ENCL_MGMT_INVALID_BUS_ID_ERR0R (0x00060002) /* Invalid Bus/ID in SEP msg */
|
||||
|
||||
#define IOP_LOGINFO_CODE_TARGET_ASSIST_TERMINATED (0x00070001)
|
||||
#define IOP_LOGINFO_CODE_TARGET_STATUS_SEND_TERMINATED (0x00070002)
|
||||
#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_ALL_IO (0x00070003)
|
||||
#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO (0x00070004)
|
||||
#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO_REQ (0x00070005)
|
||||
|
||||
/****************************************************************************/
|
||||
/* PL LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = PL */
|
||||
/****************************************************************************/
|
||||
#define PL_LOGINFO_CODE_OPEN_FAILURE (0x00010000)
|
||||
#define PL_LOG_INFO_CODE_OPEN_FAILURE_NO_DEST_TIME_OUT (0x00010001)
|
||||
#define PL_LOGINFO_CODE_OPEN_FAILURE_BAD_DESTINATION (0x00010011)
|
||||
#define PL_LOGINFO_CODE_OPEN_FAILURE_PROTOCOL_NOT_SUPPORTED (0x00010013)
|
||||
#define PL_LOGINFO_CODE_OPEN_FAILURE_STP_RESOURCES_BSY (0x00010018)
|
||||
#define PL_LOGINFO_CODE_OPEN_FAILURE_WRONG_DESTINATION (0x00010019)
|
||||
#define PL_LOGINFO_CODE_OPEN_FAILURE_ORR_TIMEOUT (0X0001001A)
|
||||
#define PL_LOGINFO_CODE_OPEN_FAILURE_PATHWAY_BLOCKED (0x0001001B)
|
||||
#define PL_LOGINFO_CODE_OPEN_FAILURE_AWT_MAXED (0x0001001C)
|
||||
#define PL_LOGINFO_CODE_INVALID_SGL (0x00020000)
|
||||
#define PL_LOGINFO_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH (0x00030000)
|
||||
#define PL_LOGINFO_CODE_FRAME_XFER_ERROR (0x00040000)
|
||||
#define PL_LOGINFO_CODE_TX_FM_CONNECTED_LOW (0x00050000)
|
||||
#define PL_LOGINFO_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET (0x00060000)
|
||||
#define PL_LOGINFO_CODE_SATA_READ_LOG_RECEIVE_DATA_ERR (0x00070000)
|
||||
#define PL_LOGINFO_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR (0x00080000)
|
||||
#define PL_LOGINFO_CODE_SATA_ERR_IN_RCV_SET_DEV_BIT_FIS (0x00090000)
|
||||
#define PL_LOGINFO_CODE_RX_FM_INVALID_MESSAGE (0x000A0000)
|
||||
#define PL_LOGINFO_CODE_RX_CTX_MESSAGE_VALID_ERROR (0x000B0000)
|
||||
#define PL_LOGINFO_CODE_RX_FM_CURRENT_FRAME_ERROR (0x000C0000)
|
||||
#define PL_LOGINFO_CODE_SATA_LINK_DOWN (0x000D0000)
|
||||
#define PL_LOGINFO_CODE_DISCOVERY_SATA_INIT_W_IOS (0x000E0000)
|
||||
#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE (0x000F0000)
|
||||
#define PL_LOGINFO_CODE_CONFIG_PL_NOT_INITIALIZED (0x000F0001) /* PL not yet initialized, can't do config page req. */
|
||||
#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PT (0x000F0100) /* Invalid Page Type */
|
||||
#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NUM_PHYS (0x000F0200) /* Invalid Number of Phys */
|
||||
#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NOT_IMP (0x000F0300) /* Case Not Handled */
|
||||
#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NO_DEV (0x000F0400) /* No Device Found */
|
||||
#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_FORM (0x000F0500) /* Invalid FORM */
|
||||
#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PHY (0x000F0600) /* Invalid Phy */
|
||||
#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NO_OWNER (0x000F0700) /* No Owner Found */
|
||||
#define PL_LOGINFO_CODE_DSCVRY_SATA_INIT_TIMEOUT (0x00100000)
|
||||
#define PL_LOGINFO_CODE_RESET (0x00110000) /* See Sub-Codes below */
|
||||
#define PL_LOGINFO_CODE_ABORT (0x00120000) /* See Sub-Codes below */
|
||||
#define PL_LOGINFO_CODE_IO_NOT_YET_EXECUTED (0x00130000)
|
||||
#define PL_LOGINFO_CODE_IO_EXECUTED (0x00140000)
|
||||
#define PL_LOGINFO_CODE_PERS_RESV_OUT_NOT_AFFIL_OWNER (0x00150000)
|
||||
#define PL_LOGINFO_CODE_OPEN_TXDMA_ABORT (0x00160000)
|
||||
#define PL_LOGINFO_CODE_IO_DEVICE_MISSING_DELAY_RETRY (0x00170000)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE (0x00000100)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_NO_DEST_TIMEOUT (0x00000101)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ORR_TIMEOUT (0x0000011A) /* Open Reject (Retry) Timeout */
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_PATHWAY_BLOCKED (0x0000011B)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_AWT_MAXED (0x0000011C) /* Arbitration Wait Timer Maxed */
|
||||
#define PL_LOGINFO_CODE_OPEN_FAILURE (0x00010000) /* see SUB_CODE_OPEN_FAIL_ below */
|
||||
|
||||
#define PL_LOGINFO_SUB_CODE_TARGET_BUS_RESET (0x00000120)
|
||||
#define PL_LOGINFO_SUB_CODE_TRANSPORT_LAYER (0x00000130) /* Leave lower nibble (1-f) reserved. */
|
||||
#define PL_LOGINFO_SUB_CODE_PORT_LAYER (0x00000140) /* Leave lower nibble (1-f) reserved. */
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_NO_DEST_TIME_OUT (0x00000001)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_PATHWAY_BLOCKED (0x00000002)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RES_CONTINUE0 (0x00000003)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RES_CONTINUE1 (0x00000004)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RES_INITIALIZE0 (0x00000005)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RES_INITIALIZE1 (0x00000006)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RES_STOP0 (0x00000007)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RES_STOP1 (0x00000008)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RETRY (0x00000009)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_BREAK (0x0000000A)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_UNUSED_0B (0x0000000B)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_OPEN_TIMEOUT_EXP (0x0000000C)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_UNUSED_0D (0x0000000D)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_DVTBLE_ACCSS_FAIL (0x0000000E)
|
||||
#define PL_LOGINFO_SUB CODE_OPEN_FAIL_BAD_DEST (0x00000011)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RATE_NOT_SUPP (0x00000012)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_PROT_NOT_SUPP (0x00000013)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RESERVED_ABANDON0 (0x00000014)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RESERVED_ABANDON1 (0x00000015)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RESERVED_ABANDON2 (0x00000016)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RESERVED_ABANDON3 (0x00000017)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_STP_RESOURCES_BSY (0x00000018)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_WRONG_DESTINATION (0x00000019)
|
||||
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_PATH_BLOCKED (0x0000001B) /* Retry Timeout */
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_AWT_MAXED (0x0000001C) /* Retry Timeout */
|
||||
|
||||
|
||||
#define PL_LOGINFO_SUB_CODE_INVALID_SGL (0x00000200)
|
||||
#define PL_LOGINFO_SUB_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH (0x00000300)
|
||||
#define PL_LOGINFO_SUB_CODE_FRAME_XFER_ERROR (0x00000400)
|
||||
#define PL_LOGINFO_SUB_CODE_TX_FM_CONNECTED_LOW (0x00000500)
|
||||
#define PL_LOGINFO_SUB_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET (0x00000600)
|
||||
#define PL_LOGINFO_SUB_CODE_SATA_READ_LOG_RECEIVE_DATA_ERR (0x00000700)
|
||||
#define PL_LOGINFO_SUB_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR (0x00000800)
|
||||
#define PL_LOGINFO_SUB_CODE_SATA_ERR_IN_RCV_SET_DEV_BIT_FIS (0x00000900)
|
||||
#define PL_LOGINFO_SUB_CODE_RX_FM_INVALID_MESSAGE (0x00000A00)
|
||||
#define PL_LOGINFO_SUB_CODE_RX_CTX_MESSAGE_VALID_ERROR (0x00000B00)
|
||||
#define PL_LOGINFO_SUB_CODE_RX_FM_CURRENT_FRAME_ERROR (0x00000C00)
|
||||
#define PL_LOGINFO_SUB_CODE_SATA_LINK_DOWN (0x00000D00)
|
||||
#define PL_LOGINFO_SUB_CODE_DISCOVERY_SATA_INIT_W_IOS (0x00000E00)
|
||||
#define PL_LOGINFO_SUB_CODE_DISCOVERY_REMOTE_SEP_RESET (0x00000E01)
|
||||
#define PL_LOGINFO_SUB_CODE_SECOND_OPEN (0x00000F00)
|
||||
#define PL_LOGINFO_SUB_CODE_DSCVRY_SATA_INIT_TIMEOUT (0x00001000)
|
||||
|
||||
#define PL_LOGINFO_CODE_INVALID_SGL (0x00020000)
|
||||
#define PL_LOGINFO_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH (0x00030000)
|
||||
#define PL_LOGINFO_CODE_FRAME_XFER_ERROR (0x00040000)
|
||||
#define PL_LOGINFO_CODE_TX_FM_CONNECTED_LOW (0x00050000)
|
||||
#define PL_LOGINFO_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET (0x00060000)
|
||||
#define PL_LOGINFO_CODE_SATA_READ_LOG_RECEIVE_DATA_ERR (0x00070000)
|
||||
#define PL_LOGINFO_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR (0x00080000)
|
||||
#define PL_LOGINFO_CODE_SATA_ERR_IN_RCV_SET_DEV_BIT_FIS (0x00090000)
|
||||
#define PL_LOGINFO_CODE_RX_FM_INVALID_MESSAGE (0x000A0000)
|
||||
#define PL_LOGINFO_CODE_RX_CTX_MESSAGE_VALID_ERROR (0x000B0000)
|
||||
#define PL_LOGINFO_CODE_RX_FM_CURRENT_FRAME_ERROR (0x000C0000)
|
||||
#define PL_LOGINFO_CODE_SATA_LINK_DOWN (0x000D0000)
|
||||
#define PL_LOGINFO_CODE_DISCOVERY_SATA_INIT_W_IOS (0x000E0000)
|
||||
#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE (0x000F0000)
|
||||
#define PL_LOGINFO_CODE_CONFIG_PL_NOT_INITIALIZED (0x000F0001) /* PL not yet initialized, can't do config page req. */
|
||||
#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PT (0x000F0100) /* Invalid Page Type */
|
||||
#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NUM_PHYS (0x000F0200) /* Invalid Number of Phys */
|
||||
#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NOT_IMP (0x000F0300) /* Case Not Handled */
|
||||
#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NO_DEV (0x000F0400) /* No Device Found */
|
||||
#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_FORM (0x000F0500) /* Invalid FORM */
|
||||
#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PHY (0x000F0600) /* Invalid Phy */
|
||||
#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NO_OWNER (0x000F0700) /* No Owner Found */
|
||||
#define PL_LOGINFO_CODE_DSCVRY_SATA_INIT_TIMEOUT (0x00100000)
|
||||
#define PL_LOGINFO_CODE_RESET (0x00110000) /* See Sub-Codes below (PL_LOGINFO_SUB_CODE) */
|
||||
#define PL_LOGINFO_CODE_ABORT (0x00120000) /* See Sub-Codes below (PL_LOGINFO_SUB_CODE)*/
|
||||
#define PL_LOGINFO_CODE_IO_NOT_YET_EXECUTED (0x00130000)
|
||||
#define PL_LOGINFO_CODE_IO_EXECUTED (0x00140000)
|
||||
#define PL_LOGINFO_CODE_PERS_RESV_OUT_NOT_AFFIL_OWNER (0x00150000)
|
||||
#define PL_LOGINFO_CODE_OPEN_TXDMA_ABORT (0x00160000)
|
||||
#define PL_LOGINFO_CODE_IO_DEVICE_MISSING_DELAY_RETRY (0x00170000)
|
||||
#define PL_LOGINFO_CODE_IO_CANCELLED_DUE_TO_R_ERR (0x00180000)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE (0x00000100)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_NO_DEST_TIMEOUT (0x00000101)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_SATA_NEG_RATE_2HI (0x00000102)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_RATE_NOT_SUPPORTED (0x00000103)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_BREAK (0x00000104)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ZONE_VIOLATION (0x00000114)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ABANDON0 (0x00000114) /* Open Reject (Zone Violation) - available on SAS-2 devices */
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ABANDON1 (0x00000115)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ABANDON2 (0x00000116)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ABANDON3 (0x00000117)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ORR_TIMEOUT (0x0000011A) /* Open Reject (Retry) Timeout */
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_PATH_BLOCKED (0x0000011B)
|
||||
#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_AWT_MAXED (0x0000011C) /* Arbitration Wait Timer Maxed */
|
||||
|
||||
#define PL_LOGINFO_SUB_CODE_TARGET_BUS_RESET (0x00000120)
|
||||
#define PL_LOGINFO_SUB_CODE_TRANSPORT_LAYER (0x00000130) /* Leave lower nibble (1-f) reserved. */
|
||||
#define PL_LOGINFO_SUB_CODE_PORT_LAYER (0x00000140) /* Leave lower nibble (1-f) reserved. */
|
||||
|
||||
|
||||
#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_FAILURE (0x00200000) /* Can't get SMP Frame */
|
||||
#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR (0x00200010) /* Error occured on SMP Read */
|
||||
#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR (0x00200020) /* Error occured on SMP Write */
|
||||
#define PL_LOGINFO_CODE_ENCL_MGMT_NOT_SUPPORTED_ON_ENCL (0x00200040) /* Encl Mgmt services not available for this WWID */
|
||||
#define PL_LOGINFO_CODE_ENCL_MGMT_ADDR_MODE_NOT_SUPPORTED (0x00200050) /* Address Mode not suppored */
|
||||
#define PL_LOGINFO_CODE_ENCL_MGMT_BAD_SLOT_NUM (0x00200060) /* Invalid Slot Number in SEP Msg */
|
||||
#define PL_LOGINFO_CODE_ENCL_MGMT_SGPIO_NOT_PRESENT (0x00200070) /* SGPIO not present/enabled */
|
||||
#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_NOT_CONFIGURED (0x00200080) /* GPIO not configured */
|
||||
#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_FRAME_ERROR (0x00200090) /* GPIO can't allocate a frame */
|
||||
#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_CONFIG_PAGE_ERROR (0x002000A0) /* GPIO failed config page request */
|
||||
#define PL_LOGINFO_CODE_ENCL_MGMT_SES_FRAME_ALLOC_ERROR (0x002000B0) /* Can't get frame for SES command */
|
||||
#define PL_LOGINFO_CODE_ENCL_MGMT_SES_IO_ERROR (0x002000C0) /* I/O execution error */
|
||||
#define PL_LOGINFO_CODE_ENCL_MGMT_SES_RETRIES_EXHAUSTED (0x002000D0) /* SEP I/O retries exhausted */
|
||||
#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_ALLOC_ERROR (0x002000E0) /* Can't get frame for SMP command */
|
||||
#define PL_LOGINFO_SUB_CODE_INVALID_SGL (0x00000200)
|
||||
#define PL_LOGINFO_SUB_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH (0x00000300)
|
||||
#define PL_LOGINFO_SUB_CODE_FRAME_XFER_ERROR (0x00000400) /* Bits 0-3 encode Transport Status Register (offset 0x08) */
|
||||
/* Bit 0 is Status Bit 0: FrameXferErr */
|
||||
/* Bit 1 & 2 are Status Bits 16 and 17: FrameXmitErrStatus */
|
||||
/* Bit 3 is Status Bit 18 WriteDataLenghtGTDataLengthErr */
|
||||
|
||||
#define PL_LOGINFO_DA_SEP_NOT_PRESENT (0x00200100) /* SEP not present when msg received */
|
||||
#define PL_LOGINFO_DA_SEP_SINGLE_THREAD_ERROR (0x00200101) /* Can only accept 1 msg at a time */
|
||||
#define PL_LOGINFO_DA_SEP_ISTWI_INTR_IN_IDLE_STATE (0x00200102) /* ISTWI interrupt recvd. while IDLE */
|
||||
#define PL_LOGINFO_DA_SEP_RECEIVED_NACK_FROM_SLAVE (0x00200103) /* SEP NACK'd, it is busy */
|
||||
#define PL_LOGINFO_DA_SEP_DID_NOT_RECEIVE_ACK (0x00200104) /* SEP didn't rcv. ACK (Last Rcvd Bit = 1) */
|
||||
#define PL_LOGINFO_DA_SEP_BAD_STATUS_HDR_CHKSUM (0x00200105) /* SEP stopped or sent bad chksum in Hdr */
|
||||
#define PL_LOGINFO_DA_SEP_STOP_ON_DATA (0x00200106) /* SEP stopped while transfering data */
|
||||
#define PL_LOGINFO_DA_SEP_STOP_ON_SENSE_DATA (0x00200107) /* SEP stopped while transfering sense data */
|
||||
#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_1 (0x00200108) /* SEP returned unknown scsi status */
|
||||
#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_2 (0x00200109) /* SEP returned unknown scsi status */
|
||||
#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP (0x0020010A) /* SEP returned bad chksum after STOP */
|
||||
#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP_GETDATA (0x0020010B) /* SEP returned bad chksum after STOP while gettin data*/
|
||||
#define PL_LOGINFO_DA_SEP_UNSUPPORTED_COMMAND (0x0020010C) /* SEP doesn't support CDB opcode */
|
||||
#define PL_LOGINFO_SUB_CODE_TX_FM_CONNECTED_LOW (0x00000500)
|
||||
#define PL_LOGINFO_SUB_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET (0x00000600)
|
||||
#define PL_LOGINFO_SUB_CODE_SATA_READ_LOG_RECEIVE_DATA_ERR (0x00000700)
|
||||
#define PL_LOGINFO_SUB_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR (0x00000800)
|
||||
#define PL_LOGINFO_SUB_CODE_SATA_ERR_IN_RCV_SET_DEV_BIT_FIS (0x00000900)
|
||||
#define PL_LOGINFO_SUB_CODE_RX_FM_INVALID_MESSAGE (0x00000A00)
|
||||
#define PL_LOGINFO_SUB_CODE_RX_CTX_MESSAGE_VALID_ERROR (0x00000B00)
|
||||
#define PL_LOGINFO_SUB_CODE_RX_FM_CURRENT_FRAME_ERROR (0x00000C00)
|
||||
#define PL_LOGINFO_SUB_CODE_SATA_LINK_DOWN (0x00000D00)
|
||||
#define PL_LOGINFO_SUB_CODE_DISCOVERY_SATA_INIT_W_IOS (0x00000E00)
|
||||
#define PL_LOGINFO_SUB_CODE_DISCOVERY_REMOTE_SEP_RESET (0x00000E01)
|
||||
#define PL_LOGINFO_SUB_CODE_SECOND_OPEN (0x00000F00)
|
||||
#define PL_LOGINFO_SUB_CODE_DSCVRY_SATA_INIT_TIMEOUT (0x00001000)
|
||||
|
||||
#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_FAILURE (0x00200000) /* Can't get SMP Frame */
|
||||
#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR (0x00200010) /* Error occured on SMP Read */
|
||||
#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR (0x00200020) /* Error occured on SMP Write */
|
||||
#define PL_LOGINFO_CODE_ENCL_MGMT_NOT_SUPPORTED_ON_ENCL (0x00200040) /* Encl Mgmt services not available for this WWID */
|
||||
#define PL_LOGINFO_CODE_ENCL_MGMT_ADDR_MODE_NOT_SUPPORTED (0x00200050) /* Address Mode not suppored */
|
||||
#define PL_LOGINFO_CODE_ENCL_MGMT_BAD_SLOT_NUM (0x00200060) /* Invalid Slot Number in SEP Msg */
|
||||
#define PL_LOGINFO_CODE_ENCL_MGMT_SGPIO_NOT_PRESENT (0x00200070) /* SGPIO not present/enabled */
|
||||
#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_NOT_CONFIGURED (0x00200080) /* GPIO not configured */
|
||||
#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_FRAME_ERROR (0x00200090) /* GPIO can't allocate a frame */
|
||||
#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_CONFIG_PAGE_ERROR (0x002000A0) /* GPIO failed config page request */
|
||||
#define PL_LOGINFO_CODE_ENCL_MGMT_SES_FRAME_ALLOC_ERROR (0x002000B0) /* Can't get frame for SES command */
|
||||
#define PL_LOGINFO_CODE_ENCL_MGMT_SES_IO_ERROR (0x002000C0) /* I/O execution error */
|
||||
#define PL_LOGINFO_CODE_ENCL_MGMT_SES_RETRIES_EXHAUSTED (0x002000D0) /* SEP I/O retries exhausted */
|
||||
#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_ALLOC_ERROR (0x002000E0) /* Can't get frame for SMP command */
|
||||
|
||||
#define PL_LOGINFO_DA_SEP_NOT_PRESENT (0x00200100) /* SEP not present when msg received */
|
||||
#define PL_LOGINFO_DA_SEP_SINGLE_THREAD_ERROR (0x00200101) /* Can only accept 1 msg at a time */
|
||||
#define PL_LOGINFO_DA_SEP_ISTWI_INTR_IN_IDLE_STATE (0x00200102) /* ISTWI interrupt recvd. while IDLE */
|
||||
#define PL_LOGINFO_DA_SEP_RECEIVED_NACK_FROM_SLAVE (0x00200103) /* SEP NACK'd, it is busy */
|
||||
#define PL_LOGINFO_DA_SEP_DID_NOT_RECEIVE_ACK (0x00200104) /* SEP didn't rcv. ACK (Last Rcvd Bit = 1) */
|
||||
#define PL_LOGINFO_DA_SEP_BAD_STATUS_HDR_CHKSUM (0x00200105) /* SEP stopped or sent bad chksum in Hdr */
|
||||
#define PL_LOGINFO_DA_SEP_STOP_ON_DATA (0x00200106) /* SEP stopped while transfering data */
|
||||
#define PL_LOGINFO_DA_SEP_STOP_ON_SENSE_DATA (0x00200107) /* SEP stopped while transfering sense data */
|
||||
#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_1 (0x00200108) /* SEP returned unknown scsi status */
|
||||
#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_2 (0x00200109) /* SEP returned unknown scsi status */
|
||||
#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP (0x0020010A) /* SEP returned bad chksum after STOP */
|
||||
#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP_GETDATA (0x0020010B) /* SEP returned bad chksum after STOP while gettin data*/
|
||||
#define PL_LOGINFO_DA_SEP_UNSUPPORTED_COMMAND (0x0020010C) /* SEP doesn't support CDB opcode f/w location 1 */
|
||||
#define PL_LOGINFO_DA_SEP_UNSUPPORTED_COMMAND_2 (0x0020010D) /* SEP doesn't support CDB opcode f/w location 2 */
|
||||
#define PL_LOGINFO_DA_SEP_UNSUPPORTED_COMMAND_3 (0x0020010E) /* SEP doesn't support CDB opcode f/w location 3 */
|
||||
|
||||
|
||||
/****************************************************************************/
|
||||
|
||||
@ -1,12 +1,12 @@
|
||||
/*
|
||||
* Copyright (c) 2004 LSI Logic Corporation.
|
||||
* Copyright (c) 2004-2006 LSI Logic Corporation.
|
||||
*
|
||||
*
|
||||
* Name: mpi_sas.h
|
||||
* Title: MPI Serial Attached SCSI structures and definitions
|
||||
* Creation Date: August 19, 2004
|
||||
*
|
||||
* mpi_sas.h Version: 01.05.03
|
||||
* mpi_sas.h Version: 01.05.04
|
||||
*
|
||||
* Version History
|
||||
* ---------------
|
||||
@ -21,6 +21,8 @@
|
||||
* and Remove Device operations to SAS IO Unit Control.
|
||||
* Added DevHandle field to SAS IO Unit Control request and
|
||||
* reply.
|
||||
* 10-11-06 01.05.04 Fixed the name of a define for Operation field of SAS IO
|
||||
* Unit Control request.
|
||||
* --------------------------------------------------------------------------
|
||||
*/
|
||||
|
||||
@ -237,7 +239,8 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST
|
||||
#define MPI_SAS_OP_SEND_PRIMITIVE (0x0A)
|
||||
#define MPI_SAS_OP_FORCE_FULL_DISCOVERY (0x0B)
|
||||
#define MPI_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C)
|
||||
#define MPI_SAS_OP_TRANSMIT_REMOVE_DEVICE (0x0D)
|
||||
#define MPI_SAS_OP_TRANSMIT_REMOVE_DEVICE (0x0D) /* obsolete name */
|
||||
#define MPI_SAS_OP_REMOVE_DEVICE (0x0D)
|
||||
|
||||
/* values for the PrimFlags field */
|
||||
#define MPI_SAS_PRIMFLAGS_SINGLE (0x08)
|
||||
|
||||
Loading…
Reference in New Issue
Block a user