mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-23 09:56:00 +00:00
ARM: tegra: Device tree changes for v4.1-rc1
A bunch of changes to improve support on the Nyan Big (Acer Chromebook 13). These enable the trackpad and make the WiFi card work. Changes to the userspace-exposed name of the soundcard are required for a better audio experience. Support for Nyan Blaze (HP Chromebook 14) is added. It is very similar to Nyan Big and therefore can enjoys many of the above improvements. Since the EMC driver can now be used to scale the frequency at which external memory is clocked, corresponding EMC frequency tables are added for Jetson TK1 and the Nyan boards. The Jetson TK1, Beaver and Nyan boards now also use generated pinmux data, which makes it easier to keep it in sync with the data provided by syseng. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJVGSCcAAoJEN0jrNd/PrOhy3kP/j5j4AEYnSxIAPx52U3Yv7j4 HvqDpCx3vC3oJrRAFvHlv5v9FUx1EWpbV7GjyTP/kmbTAJdP6USRVFEs//+2p3tO dzBhZFDpygkIZOzVlO7C2o4bW9OVUiPbYeuZi0T1AgTvOzylzhdk3U0sMI0XgNZp QLha3gx4Kgs0j2GeTDZjy7iHgku1OwuBRgg0l2QdMl2fq3Cy7cJub5FkVR/T51yS y6dJSypS+4gE/x1GRS67U5OADeGl0+Rmd1TI1Hxab292fG6jcE+gtLz+gFboay4e 9F+fOU42JSD1O+5w1byMYW1WqpzZ8stIvs4end6PBteVaMFLEj7uWHuCnMbjZr2J YXbhFRT1lNJiEtPoLR3xPZsiGSG8Jf/ANkb/7fozposHke4zW/bEe8+lq94x0O0+ iqhY/0EdMsCiPTkXZ9OsG15nSvXzSAC9w9TzLyQzTL/+cCZGSEO5wpCL36ixSB7a sE5VFDq1WLN25r3jrCKcESy2PxhaRciW99D92SomAqvJBmHpzZ0GsfG7Nt6VkQ/f W+ilkULDzpeTesN6Ajx1G78yNUQXV+Gfm3WhsC7xsG7mf0Uo+0E8uAA5OzaVNkxP +JJ/F4wsKbPnbPlFuh4/CPwZHk8Dd8Q7+aTzcTDQxcJncGzv/fW3jpdS1vg7jr5L BXC55v7bM6a/d2gGhsO6 =yFLx -----END PGP SIGNATURE----- Merge tag 'tegra-for-4.1-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt Merge "ARM: tegra: Device tree changes for v4.1-rc1" from Thierry Reding: A bunch of changes to improve support on the Nyan Big (Acer Chromebook 13). These enable the trackpad and make the WiFi card work. Changes to the userspace-exposed name of the soundcard are required for a better audio experience. Support for Nyan Blaze (HP Chromebook 14) is added. It is very similar to Nyan Big and therefore can enjoys many of the above improvements. Since the EMC driver can now be used to scale the frequency at which external memory is clocked, corresponding EMC frequency tables are added for Jetson TK1 and the Nyan boards. The Jetson TK1, Beaver and Nyan boards now also use generated pinmux data, which makes it easier to keep it in sync with the data provided by syseng. * tag 'tegra-for-4.1-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Add EMC timings to Nyan Blaze device tree ARM: tegra: Add EMC timings to Nyan Big device tree ARM: tegra: Add EMC timings to Jetson TK1 device tree ARM: tegra: Add EMC to Tegra124 device tree ARM: tegra: Add Tegra124 ACTMON support of: Add binding for NVIDIA Tegra ACTMON node ARM: tegra: nyan: The WiFi card is kept powered during suspend ARM: tegra: nyan: Add gpio-restart node ARM: tegra: nyan: Set maximum frequency for SPI flash ARM: tegra: Use generated pinmux data for Nyan Big ARM: tegra: Use pwrseq-simple for the wifi in Nyan ARM: tegra: Add node for trackpad in Nyan boards ARM: tegra: Add DTS for the nyan-blaze board ARM: tegra: Move generic parts out of the nyan-big DT ARM: tegra: Change model of sound card in Nyan Big ARM: tegra: Use generated pinmux for Beaver board ARM: tegra: Import latest Jetson TK1 pinmux Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson
commit
efc98f7762
@ -0,0 +1,32 @@
|
||||
NVIDIA Tegra Activity Monitor
|
||||
|
||||
The activity monitor block collects statistics about the behaviour of other
|
||||
components in the system. This information can be used to derive the rate at
|
||||
which the external memory needs to be clocked in order to serve all requests
|
||||
from the monitored clients.
|
||||
|
||||
Required properties:
|
||||
- compatible: should be "nvidia,tegra<chip>-actmon"
|
||||
- reg: offset and length of the register set for the device
|
||||
- interrupts: standard interrupt property
|
||||
- clocks: Must contain a phandle and clock specifier pair for each entry in
|
||||
clock-names. See ../../clock/clock-bindings.txt for details.
|
||||
- clock-names: Must include the following entries:
|
||||
- actmon
|
||||
- emc
|
||||
- resets: Must contain an entry for each entry in reset-names. See
|
||||
../../reset/reset.txt for details.
|
||||
- reset-names: Must include the following entries:
|
||||
- actmon
|
||||
|
||||
Example:
|
||||
actmon@6000c800 {
|
||||
compatible = "nvidia,tegra124-actmon";
|
||||
reg = <0x0 0x6000c800 0x0 0x400>;
|
||||
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&tegra_car TEGRA124_CLK_ACTMON>,
|
||||
<&tegra_car TEGRA124_CLK_EMC>;
|
||||
clock-names = "actmon", "emc";
|
||||
resets = <&tegra_car 119>;
|
||||
reset-names = "actmon";
|
||||
};
|
||||
@ -588,6 +588,7 @@ dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \
|
||||
dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \
|
||||
tegra124-jetson-tk1.dtb \
|
||||
tegra124-nyan-big.dtb \
|
||||
tegra124-nyan-blaze.dtb \
|
||||
tegra124-venice2.dtb
|
||||
dtb-$(CONFIG_ARCH_U300) += \
|
||||
ste-u300.dtb
|
||||
|
||||
2421
arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi
Normal file
2421
arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi
Normal file
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
2023
arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi
Normal file
2023
arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi
Normal file
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
2049
arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi
Normal file
2049
arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi
Normal file
File diff suppressed because it is too large
Load Diff
1334
arch/arm/boot/dts/tegra124-nyan-blaze.dts
Normal file
1334
arch/arm/boot/dts/tegra124-nyan-blaze.dts
Normal file
File diff suppressed because it is too large
Load Diff
695
arch/arm/boot/dts/tegra124-nyan.dtsi
Normal file
695
arch/arm/boot/dts/tegra124-nyan.dtsi
Normal file
@ -0,0 +1,695 @@
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include "tegra124.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
rtc0 = "/i2c@0,7000d000/pmic@40";
|
||||
rtc1 = "/rtc@0,7000e000";
|
||||
serial0 = &uarta;
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x0 0x80000000 0x0 0x80000000>;
|
||||
};
|
||||
|
||||
host1x@0,50000000 {
|
||||
hdmi@0,54280000 {
|
||||
status = "okay";
|
||||
|
||||
vdd-supply = <&vdd_3v3_hdmi>;
|
||||
pll-supply = <&vdd_hdmi_pll>;
|
||||
hdmi-supply = <&vdd_5v0_hdmi>;
|
||||
|
||||
nvidia,ddc-i2c-bus = <&hdmi_ddc>;
|
||||
nvidia,hpd-gpio =
|
||||
<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
sor@0,54540000 {
|
||||
status = "okay";
|
||||
|
||||
nvidia,dpaux = <&dpaux>;
|
||||
nvidia,panel = <&panel>;
|
||||
};
|
||||
|
||||
dpaux@0,545c0000 {
|
||||
vdd-supply = <&vdd_3v3_panel>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
serial@0,70006000 {
|
||||
/* Debug connector on the bottom of the board near SD card. */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pwm@0,7000a000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c@0,7000c000 {
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
|
||||
acodec: audio-codec@10 {
|
||||
compatible = "maxim,max98090";
|
||||
reg = <0x10>;
|
||||
interrupt-parent = <&gpio>;
|
||||
interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
temperature-sensor@4c {
|
||||
compatible = "ti,tmp451";
|
||||
reg = <0x4c>;
|
||||
interrupt-parent = <&gpio>;
|
||||
interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
#thermal-sensor-cells = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@0,7000c400 {
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
|
||||
trackpad@15 {
|
||||
compatible = "elan,ekth3000";
|
||||
reg = <0x15>;
|
||||
interrupt-parent = <&gpio>;
|
||||
interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@0,7000c500 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
tpm@20 {
|
||||
compatible = "infineon,slb9645tt";
|
||||
reg = <0x20>;
|
||||
};
|
||||
};
|
||||
|
||||
hdmi_ddc: i2c@0,7000c700 {
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
};
|
||||
|
||||
i2c@0,7000d000 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
pmic: pmic@40 {
|
||||
compatible = "ams,as3722";
|
||||
reg = <0x40>;
|
||||
interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
ams,system-power-controller;
|
||||
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-controller;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&as3722_default>;
|
||||
|
||||
as3722_default: pinmux {
|
||||
gpio0 {
|
||||
pins = "gpio0";
|
||||
function = "gpio";
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
gpio1 {
|
||||
pins = "gpio1";
|
||||
function = "gpio";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
gpio2_4_7 {
|
||||
pins = "gpio2", "gpio4", "gpio7";
|
||||
function = "gpio";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
gpio3_6 {
|
||||
pins = "gpio3", "gpio6";
|
||||
bias-high-impedance;
|
||||
};
|
||||
|
||||
gpio5 {
|
||||
pins = "gpio5";
|
||||
function = "clk32k-out";
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
regulators {
|
||||
vsup-sd2-supply = <&vdd_5v0_sys>;
|
||||
vsup-sd3-supply = <&vdd_5v0_sys>;
|
||||
vsup-sd4-supply = <&vdd_5v0_sys>;
|
||||
vsup-sd5-supply = <&vdd_5v0_sys>;
|
||||
vin-ldo0-supply = <&vdd_1v35_lp0>;
|
||||
vin-ldo1-6-supply = <&vdd_3v3_run>;
|
||||
vin-ldo2-5-7-supply = <&vddio_1v8>;
|
||||
vin-ldo3-4-supply = <&vdd_3v3_sys>;
|
||||
vin-ldo9-10-supply = <&vdd_5v0_sys>;
|
||||
vin-ldo11-supply = <&vdd_3v3_run>;
|
||||
|
||||
sd0 {
|
||||
regulator-name = "+VDD_CPU_AP";
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-min-microamp = <3500000>;
|
||||
regulator-max-microamp = <3500000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
ams,ext-control = <2>;
|
||||
};
|
||||
|
||||
sd1 {
|
||||
regulator-name = "+VDD_CORE";
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-min-microamp = <2500000>;
|
||||
regulator-max-microamp = <4000000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
ams,ext-control = <1>;
|
||||
};
|
||||
|
||||
vdd_1v35_lp0: sd2 {
|
||||
regulator-name = "+1.35V_LP0(sd2)";
|
||||
regulator-min-microvolt = <1350000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
sd3 {
|
||||
regulator-name = "+1.35V_LP0(sd3)";
|
||||
regulator-min-microvolt = <1350000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vdd_1v05_run: sd4 {
|
||||
regulator-name = "+1.05V_RUN";
|
||||
regulator-min-microvolt = <1050000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
};
|
||||
|
||||
vddio_1v8: sd5 {
|
||||
regulator-name = "+1.8V_VDDIO";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
sd6 {
|
||||
regulator-name = "+VDD_GPU_AP";
|
||||
regulator-min-microvolt = <650000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-min-microamp = <3500000>;
|
||||
regulator-max-microamp = <3500000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo0 {
|
||||
regulator-name = "+1.05V_RUN_AVDD";
|
||||
regulator-min-microvolt = <1050000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
ams,ext-control = <1>;
|
||||
};
|
||||
|
||||
ldo1 {
|
||||
regulator-name = "+1.8V_RUN_CAM";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo2 {
|
||||
regulator-name = "+1.2V_GEN_AVDD";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo3 {
|
||||
regulator-name = "+1.00V_LP0_VDD_RTC";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
ams,enable-tracking;
|
||||
};
|
||||
|
||||
vdd_run_cam: ldo4 {
|
||||
regulator-name = "+3.3V_RUN_CAM";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
|
||||
ldo5 {
|
||||
regulator-name = "+1.2V_RUN_CAM_FRONT";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
vddio_sdmmc3: ldo6 {
|
||||
regulator-name = "+VDDIO_SDMMC3";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
ldo7 {
|
||||
regulator-name = "+1.05V_RUN_CAM_REAR";
|
||||
regulator-min-microvolt = <1050000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
};
|
||||
|
||||
ldo9 {
|
||||
regulator-name = "+2.8V_RUN_TOUCH";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
|
||||
ldo10 {
|
||||
regulator-name = "+2.8V_RUN_CAM_AF";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
|
||||
ldo11 {
|
||||
regulator-name = "+1.8V_RUN_VPP_FUSE";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
spi@0,7000d400 {
|
||||
status = "okay";
|
||||
|
||||
cros_ec: cros-ec@0 {
|
||||
compatible = "google,cros-ec-spi";
|
||||
spi-max-frequency = <3000000>;
|
||||
interrupt-parent = <&gpio>;
|
||||
interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
|
||||
reg = <0>;
|
||||
|
||||
google,cros-ec-spi-msg-delay = <2000>;
|
||||
|
||||
i2c-tunnel {
|
||||
compatible = "google,cros-ec-i2c-tunnel";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
google,remote-bus = <0>;
|
||||
|
||||
charger: bq24735@9 {
|
||||
compatible = "ti,bq24735";
|
||||
reg = <0x9>;
|
||||
interrupt-parent = <&gpio>;
|
||||
interrupts = <TEGRA_GPIO(J, 0)
|
||||
GPIO_ACTIVE_HIGH>;
|
||||
ti,ac-detect-gpios = <&gpio
|
||||
TEGRA_GPIO(J, 0)
|
||||
GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
battery: sbs-battery@b {
|
||||
compatible = "sbs,sbs-battery";
|
||||
reg = <0xb>;
|
||||
sbs,i2c-retry-count = <2>;
|
||||
sbs,poll-retry-count = <10>;
|
||||
power-supplies = <&charger>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
spi@0,7000da00 {
|
||||
status = "okay";
|
||||
spi-max-frequency = <25000000>;
|
||||
|
||||
flash@0 {
|
||||
compatible = "winbond,w25q32dw";
|
||||
spi-max-frequency = <25000000>;
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
pmc@0,7000e400 {
|
||||
nvidia,invert-interrupt;
|
||||
nvidia,suspend-mode = <0>;
|
||||
nvidia,cpu-pwr-good-time = <500>;
|
||||
nvidia,cpu-pwr-off-time = <300>;
|
||||
nvidia,core-pwr-good-time = <641 3845>;
|
||||
nvidia,core-pwr-off-time = <61036>;
|
||||
nvidia,core-power-req-active-high;
|
||||
nvidia,sys-clock-req-active-high;
|
||||
};
|
||||
|
||||
hda@0,70030000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
sdhci0_pwrseq: sdhci0_pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
|
||||
reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
sdhci@0,700b0000 { /* WiFi/BT on this bus */
|
||||
status = "okay";
|
||||
bus-width = <4>;
|
||||
no-1-8-v;
|
||||
non-removable;
|
||||
mmc-pwrseq = <&sdhci0_pwrseq>;
|
||||
vmmc-supply = <&vdd_3v3_lp0>;
|
||||
vqmmc-supply = <&vddio_1v8>;
|
||||
keep-power-in-suspend;
|
||||
};
|
||||
|
||||
sdhci@0,700b0400 { /* SD Card on this bus */
|
||||
status = "okay";
|
||||
cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
|
||||
power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
|
||||
bus-width = <4>;
|
||||
no-1-8-v;
|
||||
vqmmc-supply = <&vddio_sdmmc3>;
|
||||
};
|
||||
|
||||
sdhci@0,700b0600 { /* eMMC on this bus */
|
||||
status = "okay";
|
||||
bus-width = <8>;
|
||||
no-1-8-v;
|
||||
non-removable;
|
||||
};
|
||||
|
||||
ahub@0,70300000 {
|
||||
i2s@0,70301100 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
usb@0,7d000000 { /* Rear external USB port. */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb-phy@0,7d000000 {
|
||||
status = "okay";
|
||||
vbus-supply = <&vdd_usb1_vbus>;
|
||||
};
|
||||
|
||||
usb@0,7d004000 { /* Internal webcam. */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb-phy@0,7d004000 {
|
||||
status = "okay";
|
||||
vbus-supply = <&vdd_run_cam>;
|
||||
};
|
||||
|
||||
usb@0,7d008000 { /* Left external USB port. */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb-phy@0,7d008000 {
|
||||
status = "okay";
|
||||
vbus-supply = <&vdd_usb3_vbus>;
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
|
||||
enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
|
||||
power-supply = <&vdd_led>;
|
||||
pwms = <&pwm 1 1000000>;
|
||||
|
||||
default-brightness-level = <224>;
|
||||
brightness-levels =
|
||||
< 0 1 2 3 4 5 6 7
|
||||
8 9 10 11 12 13 14 15
|
||||
16 17 18 19 20 21 22 23
|
||||
24 25 26 27 28 29 30 31
|
||||
32 33 34 35 36 37 38 39
|
||||
40 41 42 43 44 45 46 47
|
||||
48 49 50 51 52 53 54 55
|
||||
56 57 58 59 60 61 62 63
|
||||
64 65 66 67 68 69 70 71
|
||||
72 73 74 75 76 77 78 79
|
||||
80 81 82 83 84 85 86 87
|
||||
88 89 90 91 92 93 94 95
|
||||
96 97 98 99 100 101 102 103
|
||||
104 105 106 107 108 109 110 111
|
||||
112 113 114 115 116 117 118 119
|
||||
120 121 122 123 124 125 126 127
|
||||
128 129 130 131 132 133 134 135
|
||||
136 137 138 139 140 141 142 143
|
||||
144 145 146 147 148 149 150 151
|
||||
152 153 154 155 156 157 158 159
|
||||
160 161 162 163 164 165 166 167
|
||||
168 169 170 171 172 173 174 175
|
||||
176 177 178 179 180 181 182 183
|
||||
184 185 186 187 188 189 190 191
|
||||
192 193 194 195 196 197 198 199
|
||||
200 201 202 203 204 205 206 207
|
||||
208 209 210 211 212 213 214 215
|
||||
216 217 218 219 220 221 222 223
|
||||
224 225 226 227 228 229 230 231
|
||||
232 233 234 235 236 237 238 239
|
||||
240 241 242 243 244 245 246 247
|
||||
248 249 250 251 252 253 254 255
|
||||
256>;
|
||||
};
|
||||
|
||||
clocks {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
clk32k_in: clock@0 {
|
||||
compatible = "fixed-clock";
|
||||
reg = <0>;
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
lid {
|
||||
label = "Lid";
|
||||
gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
|
||||
linux,input-type = <5>;
|
||||
linux,code = <KEY_RESERVED>;
|
||||
debounce-interval = <1>;
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
|
||||
power {
|
||||
label = "Power";
|
||||
gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_POWER>;
|
||||
debounce-interval = <30>;
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
vdd_mux: regulator@0 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <0>;
|
||||
regulator-name = "+VDD_MUX";
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vdd_5v0_sys: regulator@1 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <1>;
|
||||
regulator-name = "+5V_SYS";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vdd_mux>;
|
||||
};
|
||||
|
||||
vdd_3v3_sys: regulator@2 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <2>;
|
||||
regulator-name = "+3.3V_SYS";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vdd_mux>;
|
||||
};
|
||||
|
||||
vdd_3v3_run: regulator@3 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <3>;
|
||||
regulator-name = "+3.3V_RUN";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
vin-supply = <&vdd_3v3_sys>;
|
||||
};
|
||||
|
||||
vdd_3v3_hdmi: regulator@4 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <4>;
|
||||
regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vdd_3v3_run>;
|
||||
};
|
||||
|
||||
vdd_led: regulator@5 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <5>;
|
||||
regulator-name = "+VDD_LED";
|
||||
gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
vin-supply = <&vdd_mux>;
|
||||
};
|
||||
|
||||
vdd_5v0_ts: regulator@6 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <6>;
|
||||
regulator-name = "+5V_VDD_TS_SW";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
vin-supply = <&vdd_5v0_sys>;
|
||||
};
|
||||
|
||||
vdd_usb1_vbus: regulator@7 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <7>;
|
||||
regulator-name = "+5V_USB_HS";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
gpio-open-drain;
|
||||
vin-supply = <&vdd_5v0_sys>;
|
||||
};
|
||||
|
||||
vdd_usb3_vbus: regulator@8 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <8>;
|
||||
regulator-name = "+5V_USB_SS";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
gpio-open-drain;
|
||||
vin-supply = <&vdd_5v0_sys>;
|
||||
};
|
||||
|
||||
vdd_3v3_panel: regulator@9 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <9>;
|
||||
regulator-name = "+3.3V_PANEL";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
vin-supply = <&vdd_3v3_run>;
|
||||
};
|
||||
|
||||
vdd_3v3_lp0: regulator@10 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <10>;
|
||||
regulator-name = "+3.3V_LP0";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
/*
|
||||
* TODO: find a way to wire this up with the USB EHCI
|
||||
* controllers so that it can be enabled on demand.
|
||||
*/
|
||||
regulator-always-on;
|
||||
gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
vin-supply = <&vdd_3v3_sys>;
|
||||
};
|
||||
|
||||
vdd_hdmi_pll: regulator@11 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <11>;
|
||||
regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
|
||||
regulator-min-microvolt = <1050000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
|
||||
vin-supply = <&vdd_1v05_run>;
|
||||
};
|
||||
|
||||
vdd_5v0_hdmi: regulator@12 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <12>;
|
||||
regulator-name = "+5V_HDMI_CON";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
vin-supply = <&vdd_5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
nvidia,audio-routing =
|
||||
"Headphones", "HPR",
|
||||
"Headphones", "HPL",
|
||||
"Speakers", "SPKR",
|
||||
"Speakers", "SPKL",
|
||||
"Mic Jack", "MICBIAS",
|
||||
"DMICL", "Int Mic",
|
||||
"DMICR", "Int Mic",
|
||||
"IN34", "Mic Jack";
|
||||
|
||||
nvidia,i2s-controller = <&tegra_i2s1>;
|
||||
nvidia,audio-codec = <&acodec>;
|
||||
|
||||
clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
|
||||
<&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
|
||||
<&tegra_car TEGRA124_CLK_EXTERN1>;
|
||||
clock-names = "pll_a", "pll_a_out0", "mclk";
|
||||
|
||||
nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>;
|
||||
nvidia,mic-det-gpios =
|
||||
<&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
gpio-restart {
|
||||
compatible = "gpio-restart";
|
||||
gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
|
||||
priority = <200>;
|
||||
};
|
||||
};
|
||||
|
||||
#include "cros-ec-keyboard.dtsi"
|
||||
@ -207,6 +207,7 @@
|
||||
reg = <0x0 0x60006000 0x0 0x1000>;
|
||||
#clock-cells = <1>;
|
||||
#reset-cells = <1>;
|
||||
nvidia,external-memory-controller = <&emc>;
|
||||
};
|
||||
|
||||
flow-controller@0,60007000 {
|
||||
@ -214,6 +215,17 @@
|
||||
reg = <0x0 0x60007000 0x0 0x1000>;
|
||||
};
|
||||
|
||||
actmon@0,6000c800 {
|
||||
compatible = "nvidia,tegra124-actmon";
|
||||
reg = <0x0 0x6000c800 0x0 0x400>;
|
||||
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&tegra_car TEGRA124_CLK_ACTMON>,
|
||||
<&tegra_car TEGRA124_CLK_EMC>;
|
||||
clock-names = "actmon", "emc";
|
||||
resets = <&tegra_car 119>;
|
||||
reset-names = "actmon";
|
||||
};
|
||||
|
||||
gpio: gpio@0,6000d000 {
|
||||
compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio";
|
||||
reg = <0x0 0x6000d000 0x0 0x1000>;
|
||||
@ -569,6 +581,13 @@
|
||||
#iommu-cells = <1>;
|
||||
};
|
||||
|
||||
emc: emc@0,7001b000 {
|
||||
compatible = "nvidia,tegra124-emc";
|
||||
reg = <0x0 0x7001b000 0x0 0x1000>;
|
||||
|
||||
nvidia,memory-controller = <&mc>;
|
||||
};
|
||||
|
||||
sata@0,70020000 {
|
||||
compatible = "nvidia,tegra124-ahci";
|
||||
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
Loading…
Reference in New Issue
Block a user