FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2024-12-16 05:50:19 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

pci root complex: support for tile architecture

Browse Source 
This change enables PCI root complex support for TILEPro.  Unlike
TILE-Gx, TILEPro has no support for memory-mapped I/O, so the PCI
support consists of hypervisor upcalls for PIO, DMA, etc.  However,
the performance is fine for the devices we have tested with so far
(1Gb Ethernet, SATA, etc.).

The <asm/io.h> header was tweaked to be a little bit more aggressive
about disabling attempts to map/unmap IO port space.  The hacky
<asm/pci-bridge.h> header was rolled into the <asm/pci.h> header
and the result was simplified.  Both of the latter two headers were
preliminary versions not meant for release before now - oh well.

There is one quirk for our TILEmpower platform, which accidentally
negotiates up to 5GT and needs to be kicked down to 2.5GT.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
This commit is contained in:
Chris Metcalf 2010-11-02 12:05:10 -04:00
parent e5a0693973
commit f02cbbe657
8 changed files with 705 additions and 187 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
arch/tile/Kconfig
View File

@ -329,6 +329,18 @@ endmenu # Tilera-specific configuration
menu "Bus options"
config PCI
bool "PCI support"
default y
select PCI_DOMAINS
---help---
Enable PCI root complex support, so PCIe endpoint devices can
be attached to the Tile chip. Many, but not all, PCI devices
are supported under Tilera's root complex driver.
config PCI_DOMAINS
bool
config NO_IOMEM
def_bool !PCI

15
arch/tile/include/asm/io.h
View File

@ -55,9 +55,6 @@ extern void iounmap(volatile void __iomem *addr);
#define ioremap_writethrough(physaddr, size) ioremap(physaddr, size)
#define ioremap_fullcache(physaddr, size) ioremap(physaddr, size)
void __iomem *ioport_map(unsigned long port, unsigned int len);
extern inline void ioport_unmap(void __iomem *addr) {}
#define mmiowb()
/* Conversion between virtual and physical mappings. */
@ -189,12 +186,22 @@ static inline void memcpy_toio(volatile void __iomem *dst, const void *src,
* we never run, uses them unconditionally.
*/
static inline int ioport_panic(void)
static inline long ioport_panic(void)
{
panic("inb/outb and friends do not exist on tile");
return 0;
}
static inline void __iomem *ioport_map(unsigned long port, unsigned int len)
{
return (void __iomem *) ioport_panic();
}
static inline void ioport_unmap(void __iomem *addr)
{
ioport_panic();
}
static inline u8 inb(unsigned long addr)
{
return ioport_panic();

117
arch/tile/include/asm/pci-bridge.h
View File

@ -1,117 +0,0 @@
/*
* Copyright 2010 Tilera Corporation. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation, version 2.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for
* more details.
*/
#ifndef _ASM_TILE_PCI_BRIDGE_H
#define _ASM_TILE_PCI_BRIDGE_H
#include <linux/ioport.h>
#include <linux/pci.h>
struct device_node;
struct pci_controller;
/*
* pci_io_base returns the memory address at which you can access
* the I/O space for PCI bus number `bus' (or NULL on error).
*/
extern void __iomem *pci_bus_io_base(unsigned int bus);
extern unsigned long pci_bus_io_base_phys(unsigned int bus);
extern unsigned long pci_bus_mem_base_phys(unsigned int bus);
/* Allocate a new PCI host bridge structure */
extern struct pci_controller *pcibios_alloc_controller(void);
/* Helper function for setting up resources */
extern void pci_init_resource(struct resource *res, unsigned long start,
unsigned long end, int flags, char *name);
/* Get the PCI host controller for a bus */
extern struct pci_controller *pci_bus_to_hose(int bus);
/*
* Structure of a PCI controller (host bridge)
*/
struct pci_controller {
int index; /* PCI domain number */
struct pci_bus *root_bus;
int first_busno;
int last_busno;
int hv_cfg_fd[2]; /* config{0,1} fds for this PCIe controller */
int hv_mem_fd; /* fd to Hypervisor for MMIO operations */
struct pci_ops *ops;
int irq_base; /* Base IRQ from the Hypervisor */
int plx_gen1; /* flag for PLX Gen 1 configuration */
/* Address ranges that are routed to this controller/bridge. */
struct resource mem_resources[3];
};
static inline struct pci_controller *pci_bus_to_host(struct pci_bus *bus)
{
return bus->sysdata;
}
extern void setup_indirect_pci_nomap(struct pci_controller *hose,
void __iomem *cfg_addr, void __iomem *cfg_data);
extern void setup_indirect_pci(struct pci_controller *hose,
u32 cfg_addr, u32 cfg_data);
extern void setup_grackle(struct pci_controller *hose);
extern unsigned char common_swizzle(struct pci_dev *, unsigned char *);
/*
* The following code swizzles for exactly one bridge. The routine
* common_swizzle below handles multiple bridges. But there are a
* some boards that don't follow the PCI spec's suggestion so we
* break this piece out separately.
*/
static inline unsigned char bridge_swizzle(unsigned char pin,
unsigned char idsel)
{
return (((pin-1) + idsel) % 4) + 1;
}
/*
* The following macro is used to lookup irqs in a standard table
* format for those PPC systems that do not already have PCI
* interrupts properly routed.
*/
/* FIXME - double check this */
#define PCI_IRQ_TABLE_LOOKUP ({ \
long _ctl_ = -1; \
if (idsel >= min_idsel && idsel <= max_idsel && pin <= irqs_per_slot) \
_ctl_ = pci_irq_table[idsel - min_idsel][pin-1]; \
_ctl_; \
})
/*
* Scan the buses below a given PCI host bridge and assign suitable
* resources to all devices found.
*/
extern int pciauto_bus_scan(struct pci_controller *, int);
#ifdef CONFIG_PCI
extern unsigned long pci_address_to_pio(phys_addr_t address);
#else
static inline unsigned long pci_address_to_pio(phys_addr_t address)
{
return (unsigned long)-1;
}
#endif
#endif /* _ASM_TILE_PCI_BRIDGE_H */

107
arch/tile/include/asm/pci.h
View File

@ -15,7 +15,29 @@
#ifndef _ASM_TILE_PCI_H
#define _ASM_TILE_PCI_H
#include <asm/pci-bridge.h>
#include <linux/pci.h>
/*
* Structure of a PCI controller (host bridge)
*/
struct pci_controller {
int index; /* PCI domain number */
struct pci_bus *root_bus;
int first_busno;
int last_busno;
int hv_cfg_fd[2]; /* config{0,1} fds for this PCIe controller */
int hv_mem_fd; /* fd to Hypervisor for MMIO operations */
struct pci_ops *ops;
int irq_base; /* Base IRQ from the Hypervisor */
int plx_gen1; /* flag for PLX Gen 1 configuration */
/* Address ranges that are routed to this controller/bridge. */
struct resource mem_resources[3];
};
/*
* The hypervisor maps the entirety of CPA-space as bus addresses, so
@ -24,57 +46,13 @@
*/
#define PCI_DMA_BUS_IS_PHYS 1
struct pci_controller *pci_bus_to_hose(int bus);
unsigned char __init common_swizzle(struct pci_dev *dev, unsigned char *pinp);
int __init tile_pci_init(void);
void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {}
void __devinit pcibios_fixup_bus(struct pci_bus *bus);
int __devinit _tile_cfg_read(struct pci_controller *hose,
int bus,
int slot,
int function,
int offset,
int size,
u32 *val);
int __devinit _tile_cfg_write(struct pci_controller *hose,
int bus,
int slot,
int function,
int offset,
int size,
u32 val);
/*
* These are used to to config reads and writes in the early stages of
* setup before the driver infrastructure has been set up enough to be
* able to do config reads and writes.
*/
#define early_cfg_read(where, size, value) \
_tile_cfg_read(controller, \
current_bus, \
pci_slot, \
pci_fn, \
where, \
size, \
value)
#define early_cfg_write(where, size, value) \
_tile_cfg_write(controller, \
current_bus, \
pci_slot, \
pci_fn, \
where, \
size, \
value)
#define PCICFG_BYTE 1
#define PCICFG_WORD 2
#define PCICFG_DWORD 4
#define TILE_NUM_PCIE 2
#define pci_domain_nr(bus) (((struct pci_controller *)(bus)->sysdata)->index)
@ -88,33 +66,33 @@ static inline int pci_proc_domain(struct pci_bus *bus)
}
/*
* I/O space is currently not supported.
* pcibios_assign_all_busses() tells whether or not the bus numbers
* should be reassigned, in case the BIOS didn't do it correctly, or
* in case we don't have a BIOS and we want to let Linux do it.
*/
static inline int pcibios_assign_all_busses(void)
{
return 1;
}
#define TILE_PCIE_LOWER_IO 0x0
#define TILE_PCIE_UPPER_IO 0x10000
#define TILE_PCIE_PCIE_IO_SIZE 0x0000FFFF
#define _PAGE_NO_CACHE 0
#define _PAGE_GUARDED 0
#define pcibios_assign_all_busses() pci_assign_all_buses
extern int pci_assign_all_buses;
/*
* No special bus mastering setup handling.
*/
static inline void pcibios_set_master(struct pci_dev *dev)
{
/* No special bus mastering setup handling */
}
#define PCIBIOS_MIN_MEM 0
#define PCIBIOS_MIN_IO TILE_PCIE_LOWER_IO
#define PCIBIOS_MIN_IO 0
/*
* This flag tells if the platform is TILEmpower that needs
* special configuration for the PLX switch chip.
*/
extern int blade_pci;
extern int tile_plx_gen1;
/* Use any cpu for PCI. */
#define cpumask_of_pcibus(bus) cpu_online_mask
/* implement the pci_ DMA API in terms of the generic device dma_ one */
#include <asm-generic/pci-dma-compat.h>
@ -122,7 +100,4 @@ extern int blade_pci;
/* generic pci stuff */
#include <asm-generic/pci.h>
/* Use any cpu for PCI. */
#define cpumask_of_pcibus(bus) cpu_online_mask
#endif /* _ASM_TILE_PCI_H */

1
arch/tile/kernel/Makefile
View File

@ -15,3 +15,4 @@ obj-$(CONFIG_SMP) += smpboot.o smp.o tlb.o
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
obj-$(CONFIG_PCI) += pci.o

621
arch/tile/kernel/pci.c Normal file
View File

@ -0,0 +1,621 @@
/*
* Copyright 2010 Tilera Corporation. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation, version 2.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for
* more details.
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/capability.h>
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/bootmem.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/uaccess.h>
#include <asm/processor.h>
#include <asm/sections.h>
#include <asm/byteorder.h>
#include <asm/hv_driver.h>
#include <hv/drv_pcie_rc_intf.h>
/*
* Initialization flow and process
* -------------------------------
*
* This files containes the routines to search for PCI buses,
* enumerate the buses, and configure any attached devices.
*
* There are two entry points here:
* 1) tile_pci_init
* This sets up the pci_controller structs, and opens the
* FDs to the hypervisor. This is called from setup_arch() early
* in the boot process.
* 2) pcibios_init
* This probes the PCI bus(es) for any attached hardware. It's
* called by subsys_initcall. All of the real work is done by the
* generic Linux PCI layer.
*
*/
/*
* This flag tells if the platform is TILEmpower that needs
* special configuration for the PLX switch chip.
*/
int __write_once tile_plx_gen1;
static struct pci_controller controllers[TILE_NUM_PCIE];
static int num_controllers;
static struct pci_ops tile_cfg_ops;
/*
* We don't need to worry about the alignment of resources.
*/
resource_size_t pcibios_align_resource(void *data, const struct resource *res,
resource_size_t size, resource_size_t align)
{
return res->start;
}
EXPORT_SYMBOL(pcibios_align_resource);
/*
* Open a FD to the hypervisor PCI device.
*
* controller_id is the controller number, config type is 0 or 1 for
* config0 or config1 operations.
*/
static int __init tile_pcie_open(int controller_id, int config_type)
{
char filename[32];
int fd;
sprintf(filename, "pcie/%d/config%d", controller_id, config_type);
fd = hv_dev_open((HV_VirtAddr)filename, 0);
return fd;
}
/*
* Get the IRQ numbers from the HV and set up the handlers for them.
*/
static int __init tile_init_irqs(int controller_id,
struct pci_controller *controller)
{
char filename[32];
int fd;
int ret;
int x;
struct pcie_rc_config rc_config;
sprintf(filename, "pcie/%d/ctl", controller_id);
fd = hv_dev_open((HV_VirtAddr)filename, 0);
if (fd < 0) {
pr_err("PCI: hv_dev_open(%s) failed\n", filename);
return -1;
}
ret = hv_dev_pread(fd, 0, (HV_VirtAddr)(&rc_config),
sizeof(rc_config), PCIE_RC_CONFIG_MASK_OFF);
hv_dev_close(fd);
if (ret != sizeof(rc_config)) {
pr_err("PCI: wanted %zd bytes, got %d\n",
sizeof(rc_config), ret);
return -1;
}
/* Record irq_base so that we can map INTx to IRQ # later. */
controller->irq_base = rc_config.intr;
for (x = 0; x < 4; x++)
tile_irq_activate(rc_config.intr + x,
TILE_IRQ_HW_CLEAR);
if (rc_config.plx_gen1)
controller->plx_gen1 = 1;
return 0;
}
/*
* First initialization entry point, called from setup_arch().
*
* Find valid controllers and fill in pci_controller structs for each
* of them.
*
* Returns the number of controllers discovered.
*/
int __init tile_pci_init(void)
{
int i;
pr_info("PCI: Searching for controllers...\n");
/* Do any configuration we need before using the PCIe */
for (i = 0; i < TILE_NUM_PCIE; i++) {
int hv_cfg_fd0 = -1;
int hv_cfg_fd1 = -1;
int hv_mem_fd = -1;
char name[32];
struct pci_controller *controller;
/*
* Open the fd to the HV. If it fails then this
* device doesn't exist.
*/
hv_cfg_fd0 = tile_pcie_open(i, 0);
if (hv_cfg_fd0 < 0)
continue;
hv_cfg_fd1 = tile_pcie_open(i, 1);
if (hv_cfg_fd1 < 0) {
pr_err("PCI: Couldn't open config fd to HV "
"for controller %d\n", i);
goto err_cont;
}
sprintf(name, "pcie/%d/mem", i);
hv_mem_fd = hv_dev_open((HV_VirtAddr)name, 0);
if (hv_mem_fd < 0) {
pr_err("PCI: Could not open mem fd to HV!\n");
goto err_cont;
}
pr_info("PCI: Found PCI controller #%d\n", i);
controller = &controllers[num_controllers];
if (tile_init_irqs(i, controller)) {
pr_err("PCI: Could not initialize "
"IRQs, aborting.\n");
goto err_cont;
}
controller->index = num_controllers;
controller->hv_cfg_fd[0] = hv_cfg_fd0;
controller->hv_cfg_fd[1] = hv_cfg_fd1;
controller->hv_mem_fd = hv_mem_fd;
controller->first_busno = 0;
controller->last_busno = 0xff;
controller->ops = &tile_cfg_ops;
num_controllers++;
continue;
err_cont:
if (hv_cfg_fd0 >= 0)
hv_dev_close(hv_cfg_fd0);
if (hv_cfg_fd1 >= 0)
hv_dev_close(hv_cfg_fd1);
if (hv_mem_fd >= 0)
hv_dev_close(hv_mem_fd);
continue;
}
/*
* Before using the PCIe, see if we need to do any platform-specific
* configuration, such as the PLX switch Gen 1 issue on TILEmpower.
*/
for (i = 0; i < num_controllers; i++) {
struct pci_controller *controller = &controllers[i];
if (controller->plx_gen1)
tile_plx_gen1 = 1;
}
return num_controllers;
}
/*
* (pin - 1) converts from the PCI standard's [1:4] convention to
* a normal [0:3] range.
*/
static int tile_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
struct pci_controller *controller =
(struct pci_controller *)dev->sysdata;
return (pin - 1) + controller->irq_base;
}
static void __init fixup_read_and_payload_sizes(void)
{
struct pci_dev *dev = NULL;
int smallest_max_payload = 0x1; /* Tile maxes out at 256 bytes. */
int max_read_size = 0x2; /* Limit to 512 byte reads. */
u16 new_values;
/* Scan for the smallest maximum payload size. */
while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
int pcie_caps_offset;
u32 devcap;
int max_payload;
pcie_caps_offset = pci_find_capability(dev, PCI_CAP_ID_EXP);
if (pcie_caps_offset == 0)
continue;
pci_read_config_dword(dev, pcie_caps_offset + PCI_EXP_DEVCAP,
&devcap);
max_payload = devcap & PCI_EXP_DEVCAP_PAYLOAD;
if (max_payload < smallest_max_payload)
smallest_max_payload = max_payload;
}
/* Now, set the max_payload_size for all devices to that value. */
new_values = (max_read_size << 12) | (smallest_max_payload << 5);
while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
int pcie_caps_offset;
u16 devctl;
pcie_caps_offset = pci_find_capability(dev, PCI_CAP_ID_EXP);
if (pcie_caps_offset == 0)
continue;
pci_read_config_word(dev, pcie_caps_offset + PCI_EXP_DEVCTL,
&devctl);
devctl &= ~(PCI_EXP_DEVCTL_PAYLOAD | PCI_EXP_DEVCTL_READRQ);
devctl |= new_values;
pci_write_config_word(dev, pcie_caps_offset + PCI_EXP_DEVCTL,
devctl);
}
}
/*
* Second PCI initialization entry point, called by subsys_initcall.
*
* The controllers have been set up by the time we get here, by a call to
* tile_pci_init.
*/
static int __init pcibios_init(void)
{
int i;
pr_info("PCI: Probing PCI hardware\n");
/*
* Delay a bit in case devices aren't ready. Some devices are
* known to require at least 20ms here, but we use a more
* conservative value.
*/
mdelay(250);
/* Scan all of the recorded PCI controllers. */
for (i = 0; i < num_controllers; i++) {
struct pci_controller *controller = &controllers[i];
struct pci_bus *bus;
pr_info("PCI: initializing controller #%d\n", i);
/*
* This comes from the generic Linux PCI driver.
*
* It reads the PCI tree for this bus into the Linux
* data structures.
*
* This is inlined in linux/pci.h and calls into
* pci_scan_bus_parented() in probe.c.
*/
bus = pci_scan_bus(0, controller->ops, controller);
controller->root_bus = bus;
controller->last_busno = bus->subordinate;
}
/* Do machine dependent PCI interrupt routing */
pci_fixup_irqs(pci_common_swizzle, tile_map_irq);
/*
* This comes from the generic Linux PCI driver.
*
* It allocates all of the resources (I/O memory, etc)
* associated with the devices read in above.
*/
pci_assign_unassigned_resources();
/* Configure the max_read_size and max_payload_size values. */
fixup_read_and_payload_sizes();
/* Record the I/O resources in the PCI controller structure. */
for (i = 0; i < num_controllers; i++) {
struct pci_bus *root_bus = controllers[i].root_bus;
struct pci_bus *next_bus;
struct pci_dev *dev;
list_for_each_entry(dev, &root_bus->devices, bus_list) {
/* Find the PCI host controller, ie. the 1st bridge. */
if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI &&
(PCI_SLOT(dev->devfn) == 0)) {
next_bus = dev->subordinate;
controllers[i].mem_resources[0] =
*next_bus->resource[0];
controllers[i].mem_resources[1] =
*next_bus->resource[1];
controllers[i].mem_resources[2] =
*next_bus->resource[2];
break;
}
}
}
return 0;
}
subsys_initcall(pcibios_init);
/*
* No bus fixups needed.
*/
void __devinit pcibios_fixup_bus(struct pci_bus *bus)
{
/* Nothing needs to be done. */
}
/*
* This can be called from the generic PCI layer, but doesn't need to
* do anything.
*/
char __devinit *pcibios_setup(char *str)
{
/* Nothing needs to be done. */
return str;
}
/*
* This is called from the generic Linux layer.
*/
void __init pcibios_update_irq(struct pci_dev *dev, int irq)
{
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
}
/*
* Enable memory and/or address decoding, as appropriate, for the
* device described by the 'dev' struct.
*
* This is called from the generic PCI layer, and can be called
* for bridges or endpoints.
*/
int pcibios_enable_device(struct pci_dev *dev, int mask)
{
u16 cmd, old_cmd;
u8 header_type;
int i;
struct resource *r;
pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type);
pci_read_config_word(dev, PCI_COMMAND, &cmd);
old_cmd = cmd;
if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
/*
* For bridges, we enable both memory and I/O decoding
* in call cases.
*/
cmd |= PCI_COMMAND_IO;
cmd |= PCI_COMMAND_MEMORY;
} else {
/*
* For endpoints, we enable memory and/or I/O decoding
* only if they have a memory resource of that type.
*/
for (i = 0; i < 6; i++) {
r = &dev->resource[i];
if (r->flags & IORESOURCE_UNSET) {
pr_err("PCI: Device %s not available "
"because of resource collisions\n",
pci_name(dev));
return -EINVAL;
}
if (r->flags & IORESOURCE_IO)
cmd |= PCI_COMMAND_IO;
if (r->flags & IORESOURCE_MEM)
cmd |= PCI_COMMAND_MEMORY;
}
}
/*
* We only write the command if it changed.
*/
if (cmd != old_cmd)
pci_write_config_word(dev, PCI_COMMAND, cmd);
return 0;
}
void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max)
{
unsigned long start = pci_resource_start(dev, bar);
unsigned long len = pci_resource_len(dev, bar);
unsigned long flags = pci_resource_flags(dev, bar);
if (!len)
return NULL;
if (max && len > max)
len = max;
if (!(flags & IORESOURCE_MEM)) {
pr_info("PCI: Trying to map invalid resource %#lx\n", flags);
start = 0;
}
return (void __iomem *)start;
}
EXPORT_SYMBOL(pci_iomap);
/****************************************************************
*
* Tile PCI config space read/write routines
*
****************************************************************/
/*
* These are the normal read and write ops
* These are expanded with macros from pci_bus_read_config_byte() etc.
*
* devfn is the combined PCI slot & function.
*
* offset is in bytes, from the start of config space for the
* specified bus & slot.
*/
static int __devinit tile_cfg_read(struct pci_bus *bus,
unsigned int devfn,
int offset,
int size,
u32 *val)
{
struct pci_controller *controller = bus->sysdata;
int busnum = bus->number & 0xff;
int slot = (devfn >> 3) & 0x1f;
int function = devfn & 0x7;
u32 addr;
int config_mode = 1;
/*
* There is no bridge between the Tile and bus 0, so we
* use config0 to talk to bus 0.
*
* If we're talking to a bus other than zero then we
* must have found a bridge.
*/
if (busnum == 0) {
/*
* We fake an empty slot for (busnum == 0) && (slot > 0),
* since there is only one slot on bus 0.
*/
if (slot) {
*val = 0xFFFFFFFF;
return 0;
}
config_mode = 0;
}
addr = busnum << 20; /* Bus in 27:20 */
addr |= slot << 15; /* Slot (device) in 19:15 */
addr |= function << 12; /* Function is in 14:12 */
addr |= (offset & 0xFFF); /* byte address in 0:11 */
return hv_dev_pread(controller->hv_cfg_fd[config_mode], 0,
(HV_VirtAddr)(val), size, addr);
}
/*
* See tile_cfg_read() for relevent comments.
* Note that "val" is the value to write, not a pointer to that value.
*/
static int __devinit tile_cfg_write(struct pci_bus *bus,
unsigned int devfn,
int offset,
int size,
u32 val)
{
struct pci_controller *controller = bus->sysdata;
int busnum = bus->number & 0xff;
int slot = (devfn >> 3) & 0x1f;
int function = devfn & 0x7;
u32 addr;
int config_mode = 1;
HV_VirtAddr valp = (HV_VirtAddr)&val;
/*
* For bus 0 slot 0 we use config 0 accesses.
*/
if (busnum == 0) {
/*
* We fake an empty slot for (busnum == 0) && (slot > 0),
* since there is only one slot on bus 0.
*/
if (slot)
return 0;
config_mode = 0;
}
addr = busnum << 20; /* Bus in 27:20 */
addr |= slot << 15; /* Slot (device) in 19:15 */
addr |= function << 12; /* Function is in 14:12 */
addr |= (offset & 0xFFF); /* byte address in 0:11 */
#ifdef __BIG_ENDIAN
/* Point to the correct part of the 32-bit "val". */
valp += 4 - size;
#endif
return hv_dev_pwrite(controller->hv_cfg_fd[config_mode], 0,
valp, size, addr);
}
static struct pci_ops tile_cfg_ops = {
.read = tile_cfg_read,
.write = tile_cfg_write,
};
/*
* In the following, each PCI controller's mem_resources[1]
* represents its (non-prefetchable) PCI memory resource.
* mem_resources[0] and mem_resources[2] refer to its PCI I/O and
* prefetchable PCI memory resources, respectively.
* For more details, see pci_setup_bridge() in setup-bus.c.
* By comparing the target PCI memory address against the
* end address of controller 0, we can determine the controller
* that should accept the PCI memory access.
*/
#define TILE_READ(size, type) \
type _tile_read##size(unsigned long addr) \
{ \
type val; \
int idx = 0; \
if (addr > controllers[0].mem_resources[1].end && \
addr > controllers[0].mem_resources[2].end) \
idx = 1; \
if (hv_dev_pread(controllers[idx].hv_mem_fd, 0, \
(HV_VirtAddr)(&val), sizeof(type), addr)) \
pr_err("PCI: read %zd bytes at 0x%lX failed\n", \
sizeof(type), addr); \
return val; \
} \
EXPORT_SYMBOL(_tile_read##size)
TILE_READ(b, u8);
TILE_READ(w, u16);
TILE_READ(l, u32);
TILE_READ(q, u64);
#define TILE_WRITE(size, type) \
void _tile_write##size(type val, unsigned long addr) \
{ \
int idx = 0; \
if (addr > controllers[0].mem_resources[1].end && \
addr > controllers[0].mem_resources[2].end) \
idx = 1; \
if (hv_dev_pwrite(controllers[idx].hv_mem_fd, 0, \
(HV_VirtAddr)(&val), sizeof(type), addr)) \
pr_err("PCI: write %zd bytes at 0x%lX failed\n", \
sizeof(type), addr); \
} \
EXPORT_SYMBOL(_tile_write##size)
TILE_WRITE(b, u8);
TILE_WRITE(w, u16);
TILE_WRITE(l, u32);
TILE_WRITE(q, u64);

1
drivers/pci/Makefile
View File

@ -49,6 +49,7 @@ obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
obj-$(CONFIG_X86_VISWS) += setup-irq.o
obj-$(CONFIG_MN10300) += setup-bus.o
obj-$(CONFIG_MICROBLAZE) += setup-bus.o
obj-$(CONFIG_TILE) += setup-bus.o setup-irq.o
#
# ACPI Related PCI FW Functions

18
drivers/pci/quirks.c
View File

@ -2136,6 +2136,24 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB,
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB,
quirk_unhide_mch_dev6);
#ifdef CONFIG_TILE
/*
* The Tilera TILEmpower platform needs to set the link speed
* to 2.5GT(Giga-Transfers)/s (Gen 1). The default link speed
* setting is 5GT/s (Gen 2). 0x98 is the Link Control2 PCIe
* capability register of the PEX8624 PCIe switch. The switch
* supports link speed auto negotiation, but falsely sets
* the link speed to 5GT/s.
*/
static void __devinit quirk_tile_plx_gen1(struct pci_dev *dev)
{
if (tile_plx_gen1) {
pci_write_config_dword(dev, 0x98, 0x1);
mdelay(50);
}
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8624, quirk_tile_plx_gen1);
#endif /* CONFIG_TILE */
#ifdef CONFIG_PCI_MSI
/* Some chipsets do not support MSI. We cannot easily rely on setting