mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-21 08:53:41 +00:00
[media] tuners: Don't use dynamic static allocation
Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/tuners/e4000.c:50:1: warning: 'e4000_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/e4000.c:83:1: warning: 'e4000_rd_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/fc2580.c:66:1: warning: 'fc2580_wr_regs.constprop.1' uses dynamic stack allocation [enabled by default] drivers/media/tuners/fc2580.c:98:1: warning: 'fc2580_rd_regs.constprop.0' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18212.c:57:1: warning: 'tda18212_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18212.c:90:1: warning: 'tda18212_rd_regs.constprop.0' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18218.c:60:1: warning: 'tda18218_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18218.c:92:1: warning: 'tda18218_rd_regs.constprop.0' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This commit is contained in:
parent
5bf30b3bc4
commit
f1baab870f
drivers/media/tuners
@ -20,20 +20,30 @@
|
||||
|
||||
#include "e4000_priv.h"
|
||||
|
||||
/* Max transfer size done by I2C transfer functions */
|
||||
#define MAX_XFER_SIZE 64
|
||||
|
||||
/* write multiple registers */
|
||||
static int e4000_wr_regs(struct e4000_priv *priv, u8 reg, u8 *val, int len)
|
||||
{
|
||||
int ret;
|
||||
u8 buf[1 + len];
|
||||
u8 buf[MAX_XFER_SIZE];
|
||||
struct i2c_msg msg[1] = {
|
||||
{
|
||||
.addr = priv->cfg->i2c_addr,
|
||||
.flags = 0,
|
||||
.len = sizeof(buf),
|
||||
.len = 1 + len,
|
||||
.buf = buf,
|
||||
}
|
||||
};
|
||||
|
||||
if (1 + len > sizeof(buf)) {
|
||||
dev_warn(&priv->i2c->dev,
|
||||
"%s: i2c wr reg=%04x: len=%d is too big!\n",
|
||||
KBUILD_MODNAME, reg, len);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
buf[0] = reg;
|
||||
memcpy(&buf[1], val, len);
|
||||
|
||||
@ -53,7 +63,7 @@ static int e4000_wr_regs(struct e4000_priv *priv, u8 reg, u8 *val, int len)
|
||||
static int e4000_rd_regs(struct e4000_priv *priv, u8 reg, u8 *val, int len)
|
||||
{
|
||||
int ret;
|
||||
u8 buf[len];
|
||||
u8 buf[MAX_XFER_SIZE];
|
||||
struct i2c_msg msg[2] = {
|
||||
{
|
||||
.addr = priv->cfg->i2c_addr,
|
||||
@ -63,11 +73,18 @@ static int e4000_rd_regs(struct e4000_priv *priv, u8 reg, u8 *val, int len)
|
||||
}, {
|
||||
.addr = priv->cfg->i2c_addr,
|
||||
.flags = I2C_M_RD,
|
||||
.len = sizeof(buf),
|
||||
.len = len,
|
||||
.buf = buf,
|
||||
}
|
||||
};
|
||||
|
||||
if (len > sizeof(buf)) {
|
||||
dev_warn(&priv->i2c->dev,
|
||||
"%s: i2c rd reg=%04x: len=%d is too big!\n",
|
||||
KBUILD_MODNAME, reg, len);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
ret = i2c_transfer(priv->i2c, msg, 2);
|
||||
if (ret == 2) {
|
||||
memcpy(val, buf, len);
|
||||
|
@ -20,6 +20,9 @@
|
||||
|
||||
#include "fc2580_priv.h"
|
||||
|
||||
/* Max transfer size done by I2C transfer functions */
|
||||
#define MAX_XFER_SIZE 64
|
||||
|
||||
/*
|
||||
* TODO:
|
||||
* I2C write and read works only for one single register. Multiple registers
|
||||
@ -41,16 +44,23 @@
|
||||
static int fc2580_wr_regs(struct fc2580_priv *priv, u8 reg, u8 *val, int len)
|
||||
{
|
||||
int ret;
|
||||
u8 buf[1 + len];
|
||||
u8 buf[MAX_XFER_SIZE];
|
||||
struct i2c_msg msg[1] = {
|
||||
{
|
||||
.addr = priv->cfg->i2c_addr,
|
||||
.flags = 0,
|
||||
.len = sizeof(buf),
|
||||
.len = 1 + len,
|
||||
.buf = buf,
|
||||
}
|
||||
};
|
||||
|
||||
if (1 + len > sizeof(buf)) {
|
||||
dev_warn(&priv->i2c->dev,
|
||||
"%s: i2c wr reg=%04x: len=%d is too big!\n",
|
||||
KBUILD_MODNAME, reg, len);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
buf[0] = reg;
|
||||
memcpy(&buf[1], val, len);
|
||||
|
||||
@ -69,7 +79,7 @@ static int fc2580_wr_regs(struct fc2580_priv *priv, u8 reg, u8 *val, int len)
|
||||
static int fc2580_rd_regs(struct fc2580_priv *priv, u8 reg, u8 *val, int len)
|
||||
{
|
||||
int ret;
|
||||
u8 buf[len];
|
||||
u8 buf[MAX_XFER_SIZE];
|
||||
struct i2c_msg msg[2] = {
|
||||
{
|
||||
.addr = priv->cfg->i2c_addr,
|
||||
@ -79,11 +89,18 @@ static int fc2580_rd_regs(struct fc2580_priv *priv, u8 reg, u8 *val, int len)
|
||||
}, {
|
||||
.addr = priv->cfg->i2c_addr,
|
||||
.flags = I2C_M_RD,
|
||||
.len = sizeof(buf),
|
||||
.len = len,
|
||||
.buf = buf,
|
||||
}
|
||||
};
|
||||
|
||||
if (len > sizeof(buf)) {
|
||||
dev_warn(&priv->i2c->dev,
|
||||
"%s: i2c rd reg=%04x: len=%d is too big!\n",
|
||||
KBUILD_MODNAME, reg, len);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
ret = i2c_transfer(priv->i2c, msg, 2);
|
||||
if (ret == 2) {
|
||||
memcpy(val, buf, len);
|
||||
|
@ -20,6 +20,9 @@
|
||||
|
||||
#include "tda18212.h"
|
||||
|
||||
/* Max transfer size done by I2C transfer functions */
|
||||
#define MAX_XFER_SIZE 64
|
||||
|
||||
struct tda18212_priv {
|
||||
struct tda18212_config *cfg;
|
||||
struct i2c_adapter *i2c;
|
||||
@ -32,16 +35,23 @@ static int tda18212_wr_regs(struct tda18212_priv *priv, u8 reg, u8 *val,
|
||||
int len)
|
||||
{
|
||||
int ret;
|
||||
u8 buf[len+1];
|
||||
u8 buf[MAX_XFER_SIZE];
|
||||
struct i2c_msg msg[1] = {
|
||||
{
|
||||
.addr = priv->cfg->i2c_address,
|
||||
.flags = 0,
|
||||
.len = sizeof(buf),
|
||||
.len = 1 + len,
|
||||
.buf = buf,
|
||||
}
|
||||
};
|
||||
|
||||
if (1 + len > sizeof(buf)) {
|
||||
dev_warn(&priv->i2c->dev,
|
||||
"%s: i2c wr reg=%04x: len=%d is too big!\n",
|
||||
KBUILD_MODNAME, reg, len);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
buf[0] = reg;
|
||||
memcpy(&buf[1], val, len);
|
||||
|
||||
@ -61,7 +71,7 @@ static int tda18212_rd_regs(struct tda18212_priv *priv, u8 reg, u8 *val,
|
||||
int len)
|
||||
{
|
||||
int ret;
|
||||
u8 buf[len];
|
||||
u8 buf[MAX_XFER_SIZE];
|
||||
struct i2c_msg msg[2] = {
|
||||
{
|
||||
.addr = priv->cfg->i2c_address,
|
||||
@ -71,11 +81,18 @@ static int tda18212_rd_regs(struct tda18212_priv *priv, u8 reg, u8 *val,
|
||||
}, {
|
||||
.addr = priv->cfg->i2c_address,
|
||||
.flags = I2C_M_RD,
|
||||
.len = sizeof(buf),
|
||||
.len = len,
|
||||
.buf = buf,
|
||||
}
|
||||
};
|
||||
|
||||
if (len > sizeof(buf)) {
|
||||
dev_warn(&priv->i2c->dev,
|
||||
"%s: i2c rd reg=%04x: len=%d is too big!\n",
|
||||
KBUILD_MODNAME, reg, len);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
ret = i2c_transfer(priv->i2c, msg, 2);
|
||||
if (ret == 2) {
|
||||
memcpy(val, buf, len);
|
||||
|
@ -20,11 +20,14 @@
|
||||
|
||||
#include "tda18218_priv.h"
|
||||
|
||||
/* Max transfer size done by I2C transfer functions */
|
||||
#define MAX_XFER_SIZE 64
|
||||
|
||||
/* write multiple registers */
|
||||
static int tda18218_wr_regs(struct tda18218_priv *priv, u8 reg, u8 *val, u8 len)
|
||||
{
|
||||
int ret = 0, len2, remaining;
|
||||
u8 buf[1 + len];
|
||||
u8 buf[MAX_XFER_SIZE];
|
||||
struct i2c_msg msg[1] = {
|
||||
{
|
||||
.addr = priv->cfg->i2c_address,
|
||||
@ -33,6 +36,13 @@ static int tda18218_wr_regs(struct tda18218_priv *priv, u8 reg, u8 *val, u8 len)
|
||||
}
|
||||
};
|
||||
|
||||
if (1 + len > sizeof(buf)) {
|
||||
dev_warn(&priv->i2c->dev,
|
||||
"%s: i2c wr reg=%04x: len=%d is too big!\n",
|
||||
KBUILD_MODNAME, reg, len);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
for (remaining = len; remaining > 0;
|
||||
remaining -= (priv->cfg->i2c_wr_max - 1)) {
|
||||
len2 = remaining;
|
||||
@ -63,7 +73,7 @@ static int tda18218_wr_regs(struct tda18218_priv *priv, u8 reg, u8 *val, u8 len)
|
||||
static int tda18218_rd_regs(struct tda18218_priv *priv, u8 reg, u8 *val, u8 len)
|
||||
{
|
||||
int ret;
|
||||
u8 buf[reg+len]; /* we must start read always from reg 0x00 */
|
||||
u8 buf[MAX_XFER_SIZE]; /* we must start read always from reg 0x00 */
|
||||
struct i2c_msg msg[2] = {
|
||||
{
|
||||
.addr = priv->cfg->i2c_address,
|
||||
@ -73,11 +83,18 @@ static int tda18218_rd_regs(struct tda18218_priv *priv, u8 reg, u8 *val, u8 len)
|
||||
}, {
|
||||
.addr = priv->cfg->i2c_address,
|
||||
.flags = I2C_M_RD,
|
||||
.len = sizeof(buf),
|
||||
.len = reg + len,
|
||||
.buf = buf,
|
||||
}
|
||||
};
|
||||
|
||||
if (reg + len > sizeof(buf)) {
|
||||
dev_warn(&priv->i2c->dev,
|
||||
"%s: i2c wr reg=%04x: len=%d is too big!\n",
|
||||
KBUILD_MODNAME, reg, len);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
ret = i2c_transfer(priv->i2c, msg, 2);
|
||||
if (ret == 2) {
|
||||
memcpy(val, &buf[reg], len);
|
||||
|
Loading…
Reference in New Issue
Block a user