mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-04 22:21:23 +00:00
PCI: Workaround missing pci_set_master in pci drivers
Ben Herrenschmidt found that commit 928bea9648
("PCI: Delay enabling
bridges until they're needed") breaks PCI in some powerpc environments.
The reason is that the PCIe port driver will call pci_enable_device() on
the bridge, so the device is enabled, but skips pci_set_master because
pcie_port_auto and no acpi on powerpc.
Because of that, pci_enable_bridge() later on (called as a result of the
child device driver doing pci_enable_device) will see the bridge as
already enabled and will not call pci_set_master() on it.
Fixed by add checking in pci_enable_bridge, and call pci_set_master
if driver skip that.
That will make the code more robot and wade off problem for missing
pci_set_master in drivers.
Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
parent
aeebc26457
commit
f41f064cf4
@ -1155,8 +1155,14 @@ static void pci_enable_bridge(struct pci_dev *dev)
|
||||
|
||||
pci_enable_bridge(dev->bus->self);
|
||||
|
||||
if (pci_is_enabled(dev))
|
||||
if (pci_is_enabled(dev)) {
|
||||
if (!dev->is_busmaster) {
|
||||
dev_warn(&dev->dev, "driver skip pci_set_master, fix it!\n");
|
||||
pci_set_master(dev);
|
||||
}
|
||||
return;
|
||||
}
|
||||
|
||||
retval = pci_enable_device(dev);
|
||||
if (retval)
|
||||
dev_err(&dev->dev, "Error enabling bridge (%d), continuing\n",
|
||||
|
Loading…
Reference in New Issue
Block a user