FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2024-12-15 05:11:32 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

Browse Source 
Pull powerpc updates from Ben Herrenschmidt:
 "This is the powerpc new goodies for 3.17.  The short story:

  The biggest bit is Michael removing all of pre-POWER4 processor
  support from the 64-bit kernel.  POWER3 and rs64.  This gets rid of a
  ton of old cruft that has been bitrotting in a long while.  It was
  broken for quite a few versions already and nobody noticed.  Nobody
  uses those machines anymore.  While at it, he cleaned up a bunch of
  old dusty cabinets, getting rid of a skeletton or two.

  Then, we have some base VFIO support for KVM, which allows assigning
  of PCI devices to KVM guests, support for large 64-bit BARs on
  "powernv" platforms, support for HMI (Hardware Management Interrupts)
  on those same platforms, some sparse-vmemmap improvements (for memory
  hotplug),

  There is the usual batch of Freescale embedded updates (summary in the
  merge commit) and fixes here or there, I think that's it for the
  highlights"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (102 commits)
  powerpc/eeh: Export eeh_iommu_group_to_pe()
  powerpc/eeh: Add missing #ifdef CONFIG_IOMMU_API
  powerpc: Reduce scariness of interrupt frames in stack traces
  powerpc: start loop at section start of start in vmemmap_populated()
  powerpc: implement vmemmap_free()
  powerpc: implement vmemmap_remove_mapping() for BOOK3S
  powerpc: implement vmemmap_list_free()
  powerpc: Fail remap_4k_pfn() if PFN doesn't fit inside PTE
  powerpc/book3s: Fix endianess issue for HMI handling on napping cpus.
  powerpc/book3s: handle HMIs for cpus in nap mode.
  powerpc/powernv: Invoke opal call to handle hmi.
  powerpc/book3s: Add basic infrastructure to handle HMI in Linux.
  powerpc/iommu: Fix comments with it_page_shift
  powerpc/powernv: Handle compound PE in config accessors
  powerpc/powernv: Handle compound PE for EEH
  powerpc/powernv: Handle compound PE
  powerpc/powernv: Split ioda_eeh_get_state()
  powerpc/powernv: Allow to freeze PE
  powerpc/powernv: Enable M64 aperatus for PHB3
  powerpc/eeh: Aux PE data for error log
  ...
This commit is contained in:
Linus Torvalds 2014-08-07 08:50:34 -07:00
commit f536b3cae8
161 changed files with 5503 additions and 3310 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
Documentation/devicetree/bindings/powerpc/fsl/board.txt
View File

@ -84,3 +84,19 @@ Example:
compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c";
reg = <0x66>;
};
* Freescale on-board CPLD
Some Freescale boards like T1040RDB have an on board CPLD connected.
Required properties:
- compatible: Should be a board-specific string like "fsl,<board>-cpld"
Example:
"fsl,t1040rdb-cpld", "fsl,t1042rdb-cpld", "fsl,t1042rdb_pi-cpld"
- reg: should describe CPLD registers
Example:
cpld@3,0 {
compatible = "fsl,t1040rdb-cpld";
reg = <3 0 0x300>;
};

87
Documentation/vfio.txt
View File

@ -305,7 +305,15 @@ faster, the map/unmap handling has been implemented in real mode which provides
an excellent performance which has limitations such as inability to do
locked pages accounting in real time.
So 3 additional ioctls have been added:
4) According to sPAPR specification, A Partitionable Endpoint (PE) is an I/O
subtree that can be treated as a unit for the purposes of partitioning and
error recovery. A PE may be a single or multi-function IOA (IO Adapter), a
function of a multi-function IOA, or multiple IOAs (possibly including switch
and bridge structures above the multiple IOAs). PPC64 guests detect PCI errors
and recover from them via EEH RTAS services, which works on the basis of
additional ioctl commands.
So 4 additional ioctls have been added:
VFIO_IOMMU_SPAPR_TCE_GET_INFO - returns the size and the start
of the DMA window on the PCI bus.
@ -316,9 +324,12 @@ So 3 additional ioctls have been added:
VFIO_IOMMU_DISABLE - disables the container.
VFIO_EEH_PE_OP - provides an API for EEH setup, error detection and recovery.
The code flow from the example above should be slightly changed:
struct vfio_eeh_pe_op pe_op = { .argsz = sizeof(pe_op), .flags = 0 };
.....
/* Add the group to the container */
ioctl(group, VFIO_GROUP_SET_CONTAINER, &container);
@ -342,9 +353,79 @@ The code flow from the example above should be slightly changed:
dma_map.flags = VFIO_DMA_MAP_FLAG_READ | VFIO_DMA_MAP_FLAG_WRITE;
/* Check here is .iova/.size are within DMA window from spapr_iommu_info */
ioctl(container, VFIO_IOMMU_MAP_DMA, &dma_map);
.....
/* Get a file descriptor for the device */
device = ioctl(group, VFIO_GROUP_GET_DEVICE_FD, "0000:06:0d.0");
....
/* Gratuitous device reset and go... */
ioctl(device, VFIO_DEVICE_RESET);
/* Make sure EEH is supported */
ioctl(container, VFIO_CHECK_EXTENSION, VFIO_EEH);
/* Enable the EEH functionality on the device */
pe_op.op = VFIO_EEH_PE_ENABLE;
ioctl(container, VFIO_EEH_PE_OP, &pe_op);
/* You're suggested to create additional data struct to represent
* PE, and put child devices belonging to same IOMMU group to the
* PE instance for later reference.
*/
/* Check the PE's state and make sure it's in functional state */
pe_op.op = VFIO_EEH_PE_GET_STATE;
ioctl(container, VFIO_EEH_PE_OP, &pe_op);
/* Save device state using pci_save_state().
* EEH should be enabled on the specified device.
*/
....
/* When 0xFF's returned from reading PCI config space or IO BARs
* of the PCI device. Check the PE's state to see if that has been
* frozen.
*/
ioctl(container, VFIO_EEH_PE_OP, &pe_op);
/* Waiting for pending PCI transactions to be completed and don't
* produce any more PCI traffic from/to the affected PE until
* recovery is finished.
*/
/* Enable IO for the affected PE and collect logs. Usually, the
* standard part of PCI config space, AER registers are dumped
* as logs for further analysis.
*/
pe_op.op = VFIO_EEH_PE_UNFREEZE_IO;
ioctl(container, VFIO_EEH_PE_OP, &pe_op);
/*
* Issue PE reset: hot or fundamental reset. Usually, hot reset
* is enough. However, the firmware of some PCI adapters would
* require fundamental reset.
*/
pe_op.op = VFIO_EEH_PE_RESET_HOT;
ioctl(container, VFIO_EEH_PE_OP, &pe_op);
pe_op.op = VFIO_EEH_PE_RESET_DEACTIVATE;
ioctl(container, VFIO_EEH_PE_OP, &pe_op);
/* Configure the PCI bridges for the affected PE */
pe_op.op = VFIO_EEH_PE_CONFIGURE;
ioctl(container, VFIO_EEH_PE_OP, &pe_op);
/* Restored state we saved at initialization time. pci_restore_state()
* is good enough as an example.
*/
/* Hopefully, error is recovered successfully. Now, you can resume to
* start PCI traffic to/from the affected PE.
*/
....
-------------------------------------------------------------------------------

4
MAINTAINERS
View File

@ -5424,6 +5424,7 @@ F: arch/powerpc/boot/rs6000.h
LINUX FOR POWERPC (32-BIT AND 64-BIT)
M: Benjamin Herrenschmidt <benh@kernel.crashing.org>
M: Paul Mackerras <paulus@samba.org>
M: Michael Ellerman <mpe@ellerman.id.au>
W: http://www.penguinppc.org/
L: linuxppc-dev@lists.ozlabs.org
Q: http://patchwork.ozlabs.org/project/linuxppc-dev/list/
@ -5465,16 +5466,17 @@ F: arch/powerpc/*/*/*virtex*
LINUX FOR POWERPC EMBEDDED PPC8XX
M: Vitaly Bordug <vitb@kernel.crashing.org>
M: Marcelo Tosatti <marcelo@kvack.org>
W: http://www.penguinppc.org/
L: linuxppc-dev@lists.ozlabs.org
S: Maintained
F: arch/powerpc/platforms/8xx/
LINUX FOR POWERPC EMBEDDED PPC83XX AND PPC85XX
M: Scott Wood <scottwood@freescale.com>
M: Kumar Gala <galak@kernel.crashing.org>
W: http://www.penguinppc.org/
L: linuxppc-dev@lists.ozlabs.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux.git
S: Maintained
F: arch/powerpc/platforms/83xx/
F: arch/powerpc/platforms/85xx/

1
arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
View File

@ -359,6 +359,7 @@
compatible = "fsl,qoriq-core-mux-1.0";
clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
clock-output-names = "cmux2";
};
mux3: mux3@60 {

69
arch/powerpc/boot/dts/fsl/t2080si-post.dtsi Normal file
View File

@ -0,0 +1,69 @@
/*
* T2080 Silicon/SoC Device Tree Source (post include)
*
* Copyright 2013 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "t2081si-post.dtsi"
&soc {
/include/ "qoriq-sata2-0.dtsi"
sata@220000 {
fsl,iommu-parent = <&pamu1>;
fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
};
/include/ "qoriq-sata2-1.dtsi"
sata@221000 {
fsl,iommu-parent = <&pamu1>;
fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
};
};
&rio {
compatible = "fsl,srio";
interrupts = <16 2 1 11>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
port1 {
#address-cells = <2>;
#size-cells = <2>;
cell-index = <1>;
};
port2 {
#address-cells = <2>;
#size-cells = <2>;
cell-index = <2>;
};
};

435
arch/powerpc/boot/dts/fsl/t2081si-post.dtsi Normal file
View File

@ -0,0 +1,435 @@
/*
* T2081 Silicon/SoC Device Tree Source (post include)
*
* Copyright 2013 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&ifc {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,ifc", "simple-bus";
interrupts = <25 2 0 0>;
};
/* controller at 0x240000 */
&pci0 {
compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0x0 0xff>;
interrupts = <20 2 0 0>;
fsl,iommu-parent = <&pamu0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <20 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 40 1 0 0
0000 0 0 2 &mpic 1 1 0 0
0000 0 0 3 &mpic 2 1 0 0
0000 0 0 4 &mpic 3 1 0 0
>;
};
};
/* controller at 0x250000 */
&pci1 {
compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 0xff>;
interrupts = <21 2 0 0>;
fsl,iommu-parent = <&pamu0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <21 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 41 1 0 0
0000 0 0 2 &mpic 5 1 0 0
0000 0 0 3 &mpic 6 1 0 0
0000 0 0 4 &mpic 7 1 0 0
>;
};
};
/* controller at 0x260000 */
&pci2 {
compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0x0 0xff>;
interrupts = <22 2 0 0>;
fsl,iommu-parent = <&pamu0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <22 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 42 1 0 0
0000 0 0 2 &mpic 9 1 0 0
0000 0 0 3 &mpic 10 1 0 0
0000 0 0 4 &mpic 11 1 0 0
>;
};
};
/* controller at 0x270000 */
&pci3 {
compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0x0 0xff>;
interrupts = <23 2 0 0>;
fsl,iommu-parent = <&pamu0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <23 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 43 1 0 0
0000 0 0 2 &mpic 0 1 0 0
0000 0 0 3 &mpic 4 1 0 0
0000 0 0 4 &mpic 8 1 0 0
>;
};
};
&dcsr {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,dcsr", "simple-bus";
dcsr-epu@0 {
compatible = "fsl,t2080-dcsr-epu", "fsl,dcsr-epu";
interrupts = <52 2 0 0
84 2 0 0
85 2 0 0
94 2 0 0
95 2 0 0>;
reg = <0x0 0x1000>;
};
dcsr-npc {
compatible = "fsl,t2080-dcsr-cnpc", "fsl,dcsr-cnpc";
reg = <0x1000 0x1000 0x1002000 0x10000>;
};
dcsr-nxc@2000 {
compatible = "fsl,dcsr-nxc";
reg = <0x2000 0x1000>;
};
dcsr-corenet {
compatible = "fsl,dcsr-corenet";
reg = <0x8000 0x1000 0x1A000 0x1000>;
};
dcsr-ocn@11000 {
compatible = "fsl,t2080-dcsr-ocn", "fsl,dcsr-ocn";
reg = <0x11000 0x1000>;
};
dcsr-ddr@12000 {
compatible = "fsl,dcsr-ddr";
dev-handle = <&ddr1>;
reg = <0x12000 0x1000>;
};
dcsr-nal@18000 {
compatible = "fsl,t2080-dcsr-nal", "fsl,dcsr-nal";
reg = <0x18000 0x1000>;
};
dcsr-rcpm@22000 {
compatible = "fsl,t2080-dcsr-rcpm", "fsl,dcsr-rcpm";
reg = <0x22000 0x1000>;
};
dcsr-snpc@30000 {
compatible = "fsl,t2080-dcsr-snpc", "fsl,dcsr-snpc";
reg = <0x30000 0x1000 0x1022000 0x10000>;
};
dcsr-snpc@31000 {
compatible = "fsl,t2080-dcsr-snpc", "fsl,dcsr-snpc";
reg = <0x31000 0x1000 0x1042000 0x10000>;
};
dcsr-snpc@32000 {
compatible = "fsl,t2080-dcsr-snpc", "fsl,dcsr-snpc";
reg = <0x32000 0x1000 0x1062000 0x10000>;
};
dcsr-cpu-sb-proxy@100000 {
compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
cpu-handle = <&cpu0>;
reg = <0x100000 0x1000 0x101000 0x1000>;
};
dcsr-cpu-sb-proxy@108000 {
compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
cpu-handle = <&cpu1>;
reg = <0x108000 0x1000 0x109000 0x1000>;
};
dcsr-cpu-sb-proxy@110000 {
compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
cpu-handle = <&cpu2>;
reg = <0x110000 0x1000 0x111000 0x1000>;
};
dcsr-cpu-sb-proxy@118000 {
compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
cpu-handle = <&cpu3>;
reg = <0x118000 0x1000 0x119000 0x1000>;
};
};
&soc {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
soc-sram-error {
compatible = "fsl,soc-sram-error";
interrupts = <16 2 1 29>;
};
corenet-law@0 {
compatible = "fsl,corenet-law";
reg = <0x0 0x1000>;
fsl,num-laws = <32>;
};
ddr1: memory-controller@8000 {
compatible = "fsl,qoriq-memory-controller-v4.7",
"fsl,qoriq-memory-controller";
reg = <0x8000 0x1000>;
interrupts = <16 2 1 23>;
};
cpc: l3-cache-controller@10000 {
compatible = "fsl,t2080-l3-cache-controller", "cache";
reg = <0x10000 0x1000
0x11000 0x1000
0x12000 0x1000>;
interrupts = <16 2 1 27
16 2 1 26
16 2 1 25>;
};
corenet-cf@18000 {
compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
reg = <0x18000 0x1000>;
interrupts = <16 2 1 31>;
fsl,ccf-num-csdids = <32>;
fsl,ccf-num-snoopids = <32>;
};
iommu@20000 {
compatible = "fsl,pamu-v1.0", "fsl,pamu";
reg = <0x20000 0x3000>;
fsl,portid-mapping = <0x8000>;
ranges = <0 0x20000 0x3000>;
#address-cells = <1>;
#size-cells = <1>;
interrupts = <
24 2 0 0
16 2 1 30>;
pamu0: pamu@0 {
reg = <0 0x1000>;
fsl,primary-cache-geometry = <32 1>;
fsl,secondary-cache-geometry = <128 2>;
};
pamu1: pamu@1000 {
reg = <0x1000 0x1000>;
fsl,primary-cache-geometry = <32 1>;
fsl,secondary-cache-geometry = <128 2>;
};
pamu2: pamu@2000 {
reg = <0x2000 0x1000>;
fsl,primary-cache-geometry = <32 1>;
fsl,secondary-cache-geometry = <128 2>;
};
};
/include/ "qoriq-mpic4.3.dtsi"
guts: global-utilities@e0000 {
compatible = "fsl,t2080-device-config", "fsl,qoriq-device-config-2.0";
reg = <0xe0000 0xe00>;
fsl,has-rstcr;
fsl,liodn-bits = <12>;
};
clockgen: global-utilities@e1000 {
compatible = "fsl,t2080-clockgen", "fsl,qoriq-clockgen-2.0";
ranges = <0x0 0xe1000 0x1000>;
reg = <0xe1000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
sysclk: sysclk {
#clock-cells = <0>;
compatible = "fsl,qoriq-sysclk-2.0";
clock-output-names = "sysclk", "fixed-clock";
};
pll0: pll0@800 {
#clock-cells = <1>;
reg = <0x800 4>;
compatible = "fsl,qoriq-core-pll-2.0";
clocks = <&sysclk>;
clock-output-names = "pll0", "pll0-div2", "pll0-div4";
};
pll1: pll1@820 {
#clock-cells = <1>;
reg = <0x820 4>;
compatible = "fsl,qoriq-core-pll-2.0";
clocks = <&sysclk>;
clock-output-names = "pll1", "pll1-div2", "pll1-div4";
};
mux0: mux0@0 {
#clock-cells = <0>;
reg = <0x0 4>;
compatible = "fsl,qoriq-core-mux-2.0";
clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
<&pll1 0>, <&pll1 1>, <&pll1 2>;
clock-names = "pll0", "pll0-div2", "pll1-div4",
"pll1", "pll1-div2", "pll1-div4";
clock-output-names = "cmux0";
};
mux1: mux1@20 {
#clock-cells = <0>;
reg = <0x20 4>;
compatible = "fsl,qoriq-core-mux-2.0";
clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
<&pll1 0>, <&pll1 1>, <&pll1 2>;
clock-names = "pll0", "pll0-div2", "pll1-div4",
"pll1", "pll1-div2", "pll1-div4";
clock-output-names = "cmux1";
};
};
rcpm: global-utilities@e2000 {
compatible = "fsl,t2080-rcpm", "fsl,qoriq-rcpm-2.0";
reg = <0xe2000 0x1000>;
};
sfp: sfp@e8000 {
compatible = "fsl,t2080-sfp";
reg = <0xe8000 0x1000>;
};
serdes: serdes@ea000 {
compatible = "fsl,t2080-serdes";
reg = <0xea000 0x4000>;
};
/include/ "elo3-dma-0.dtsi"
dma@100300 {
fsl,iommu-parent = <&pamu0>;
fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
};
/include/ "elo3-dma-1.dtsi"
dma@101300 {
fsl,iommu-parent = <&pamu0>;
fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
};
/include/ "elo3-dma-2.dtsi"
dma@102300 {
fsl,iommu-parent = <&pamu0>;
fsl,liodn-reg = <&guts 0x588>; /* DMA3LIODNR */
};
/include/ "qoriq-espi-0.dtsi"
spi@110000 {
fsl,espi-num-chipselects = <4>;
};
/include/ "qoriq-esdhc-0.dtsi"
sdhc@114000 {
compatible = "fsl,t2080-esdhc", "fsl,esdhc";
fsl,iommu-parent = <&pamu1>;
fsl,liodn-reg = <&guts 0x530>; /* SDMMCLIODNR */
sdhci,auto-cmd12;
};
/include/ "qoriq-i2c-0.dtsi"
/include/ "qoriq-i2c-1.dtsi"
/include/ "qoriq-duart-0.dtsi"
/include/ "qoriq-duart-1.dtsi"
/include/ "qoriq-gpio-0.dtsi"
/include/ "qoriq-gpio-1.dtsi"
/include/ "qoriq-gpio-2.dtsi"
/include/ "qoriq-gpio-3.dtsi"
/include/ "qoriq-usb2-mph-0.dtsi"
usb0: usb@210000 {
compatible = "fsl-usb2-mph-v2.4", "fsl-usb2-mph";
fsl,iommu-parent = <&pamu1>;
fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
phy_type = "utmi";
port0;
};
/include/ "qoriq-usb2-dr-0.dtsi"
usb1: usb@211000 {
compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr";
fsl,iommu-parent = <&pamu1>;
fsl,liodn-reg = <&guts 0x524>; /* USB1LIODNR */
dr_mode = "host";
phy_type = "utmi";
};
/include/ "qoriq-sec5.2-0.dtsi"
L2_1: l2-cache-controller@c20000 {
/* Cluster 0 L2 cache */
compatible = "fsl,t2080-l2-cache-controller";
reg = <0xc20000 0x40000>;
next-level-cache = <&cpc>;
};
};

99
arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi Normal file
View File

@ -0,0 +1,99 @@
/*
* T2080/T2081 Silicon/SoC Device Tree Source (pre include)
*
* Copyright 2013 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/dts-v1/;
/include/ "e6500_power_isa.dtsi"
/ {
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
aliases {
ccsr = &soc;
dcsr = &dcsr;
serial0 = &serial0;
serial1 = &serial1;
serial2 = &serial2;
serial3 = &serial3;
crypto = &crypto;
pci0 = &pci0;
pci1 = &pci1;
pci2 = &pci2;
pci3 = &pci3;
usb0 = &usb0;
usb1 = &usb1;
dma0 = &dma0;
dma1 = &dma1;
dma2 = &dma2;
sdhc = &sdhc;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: PowerPC,e6500@0 {
device_type = "cpu";
reg = <0 1>;
clocks = <&mux0>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x80000000>;
};
cpu1: PowerPC,e6500@2 {
device_type = "cpu";
reg = <2 3>;
clocks = <&mux0>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x80000000>;
};
cpu2: PowerPC,e6500@4 {
device_type = "cpu";
reg = <4 5>;
clocks = <&mux0>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x80000000>;
};
cpu3: PowerPC,e6500@6 {
device_type = "cpu";
reg = <6 7>;
clocks = <&mux0>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x80000000>;
};
};
};

1
arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
View File

@ -476,6 +476,7 @@
/include/ "elo3-dma-0.dtsi"
/include/ "elo3-dma-1.dtsi"
/include/ "elo3-dma-2.dtsi"
/include/ "qoriq-espi-0.dtsi"
spi@110000 {

1
arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
View File

@ -57,6 +57,7 @@
pci3 = &pci3;
dma0 = &dma0;
dma1 = &dma1;
dma2 = &dma2;
sdhc = &sdhc;
};

57
arch/powerpc/boot/dts/t2080qds.dts Normal file
View File

@ -0,0 +1,57 @@
/*
* T2080QDS Device Tree Source
*
* Copyright 2013 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/t208xsi-pre.dtsi"
/include/ "t208xqds.dtsi"
/ {
model = "fsl,T2080QDS";
compatible = "fsl,T2080QDS";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
rio: rapidio@ffe0c0000 {
reg = <0xf 0xfe0c0000 0 0x11000>;
port1 {
ranges = <0 0 0xc 0x20000000 0 0x10000000>;
};
port2 {
ranges = <0 0 0xc 0x30000000 0 0x10000000>;
};
};
};
/include/ "fsl/t2080si-post.dtsi"

57
arch/powerpc/boot/dts/t2080rdb.dts Normal file
View File

@ -0,0 +1,57 @@
/*
* T2080PCIe-RDB Board Device Tree Source
*
* Copyright 2014 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/t208xsi-pre.dtsi"
/include/ "t208xrdb.dtsi"
/ {
model = "fsl,T2080RDB";
compatible = "fsl,T2080RDB";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
rio: rapidio@ffe0c0000 {
reg = <0xf 0xfe0c0000 0 0x11000>;
port1 {
ranges = <0 0 0xc 0x20000000 0 0x10000000>;
};
port2 {
ranges = <0 0 0xc 0x30000000 0 0x10000000>;
};
};
};
/include/ "fsl/t2080si-post.dtsi"

46
arch/powerpc/boot/dts/t2081qds.dts Normal file
View File

@ -0,0 +1,46 @@
/*
* T2081QDS Device Tree Source
*
* Copyright 2013 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/t208xsi-pre.dtsi"
/include/ "t208xqds.dtsi"
/ {
model = "fsl,T2081QDS";
compatible = "fsl,T2081QDS";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
};
/include/ "fsl/t2081si-post.dtsi"

239
arch/powerpc/boot/dts/t208xqds.dtsi Normal file
View File

@ -0,0 +1,239 @@
/*
* T2080/T2081 QDS Device Tree Source
*
* Copyright 2013 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/ {
model = "fsl,T2080QDS";
compatible = "fsl,T2080QDS";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
ifc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x2000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
2 0 0xf 0xff800000 0x00010000
3 0 0xf 0xffdf0000 0x00008000>;
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
nand@2,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,ifc-nand";
reg = <0x2 0x0 0x10000>;
};
boardctrl: board-control@3,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,fpga-qixis";
reg = <3 0 0x300>;
ranges = <0 3 0 0x300>;
};
};
memory {
device_type = "memory";
};
dcsr: dcsr@f00000000 {
ranges = <0x00000000 0xf 0x00000000 0x01072000>;
};
soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q128a11"; /* 16MB */
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
};
flash@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "sst,sst25wf040";
reg = <1>;
spi-max-frequency = <35000000>;
};
flash@2 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "eon,en25s64";
reg = <2>;
spi-max-frequency = <35000000>;
};
};
i2c@118000 {
pca9547@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
#size-cells = <0>;
i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0>;
eeprom@50 {
compatible = "at24,24c512";
reg = <0x50>;
};
eeprom@51 {
compatible = "at24,24c02";
reg = <0x51>;
};
eeprom@57 {
compatible = "at24,24c02";
reg = <0x57>;
};
rtc@68 {
compatible = "dallas,ds3232";
reg = <0x68>;
interrupts = <0x1 0x1 0 0>;
};
};
i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x1>;
eeprom@55 {
compatible = "at24,24c02";
reg = <0x55>;
};
};
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2>;
ina220@40 {
compatible = "ti,ina220";
reg = <0x40>;
shunt-resistor = <1000>;
};
ina220@41 {
compatible = "ti,ina220";
reg = <0x41>;
shunt-resistor = <1000>;
};
};
};
};
sdhc@114000 {
voltage-ranges = <1800 1800 3300 3300>;
};
};
pci0: pcie@ffe240000 {
reg = <0xf 0xfe240000 0 0x10000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci1: pcie@ffe250000 {
reg = <0xf 0xfe250000 0 0x10000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci2: pcie@ffe260000 {
reg = <0xf 0xfe260000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci3: pcie@ffe270000 {
reg = <0xf 0xfe270000 0 0x10000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x10000000
0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
};

184
arch/powerpc/boot/dts/t208xrdb.dtsi Normal file
View File

@ -0,0 +1,184 @@
/*
* T2080PCIe-RDB Board Device Tree Source
*
* Copyright 2014 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/ {
model = "fsl,T2080RDB";
compatible = "fsl,T2080RDB";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
ifc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x2000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
2 0 0xf 0xff800000 0x00010000
3 0 0xf 0xffdf0000 0x00008000>;
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
nand@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,ifc-nand";
reg = <0x2 0x0 0x10000>;
};
boardctrl: board-control@2,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,t2080-cpld";
reg = <3 0 0x300>;
ranges = <0 3 0 0x300>;
};
};
memory {
device_type = "memory";
};
dcsr: dcsr@f00000000 {
ranges = <0x00000000 0xf 0x00000000 0x01072000>;
};
soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q512a";
reg = <0>;
spi-max-frequency = <10000000>; /* input clock */
};
};
i2c@118000 {
adt7481@4c {
compatible = "adi,adt7481";
reg = <0x4c>;
};
rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
interrupts = <0x1 0x1 0 0>;
};
eeprom@50 {
compatible = "atmel,24c256";
reg = <0x50>;
};
};
i2c@118100 {
pca9546@77 {
compatible = "nxp,pca9546";
reg = <0x77>;
};
};
sdhc@114000 {
voltage-ranges = <1800 1800 3300 3300>;
};
};
pci0: pcie@ffe240000 {
reg = <0xf 0xfe240000 0 0x10000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci1: pcie@ffe250000 {
reg = <0xf 0xfe250000 0 0x10000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci2: pcie@ffe260000 {
reg = <0xf 0xfe260000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci3: pcie@ffe270000 {
reg = <0xf 0xfe270000 0 0x10000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x10000000
0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
};

186
arch/powerpc/boot/dts/t4240rdb.dts Normal file
View File

@ -0,0 +1,186 @@
/*
* T4240RDB Device Tree Source
*
* Copyright 2014 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/t4240si-pre.dtsi"
/ {
model = "fsl,T4240RDB";
compatible = "fsl,T4240RDB";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
ifc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x2000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
2 0 0xf 0xff800000 0x00010000
3 0 0xf 0xffdf0000 0x00008000>;
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
nand@2,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,ifc-nand";
reg = <0x2 0x0 0x10000>;
};
};
memory {
device_type = "memory";
};
dcsr: dcsr@f00000000 {
ranges = <0x00000000 0xf 0x00000000 0x01072000>;
};
soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "sst,sst25wf040";
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
};
};
i2c@118000 {
eeprom@52 {
compatible = "at24,24c256";
reg = <0x52>;
};
eeprom@54 {
compatible = "at24,24c256";
reg = <0x54>;
};
eeprom@56 {
compatible = "at24,24c256";
reg = <0x56>;
};
rtc@68 {
compatible = "dallas,ds1374";
reg = <0x68>;
interrupts = <0x1 0x1 0 0>;
};
};
sdhc@114000 {
voltage-ranges = <1800 1800 3300 3300>;
};
};
pci0: pcie@ffe240000 {
reg = <0xf 0xfe240000 0 0x10000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci1: pcie@ffe250000 {
reg = <0xf 0xfe250000 0 0x10000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci2: pcie@ffe260000 {
reg = <0xf 0xfe260000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci3: pcie@ffe270000 {
reg = <0xf 0xfe270000 0 0x10000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
rio: rapidio@ffe0c0000 {
reg = <0xf 0xfe0c0000 0 0x11000>;
port1 {
ranges = <0 0 0xc 0x20000000 0 0x10000000>;
};
port2 {
ranges = <0 0 0xc 0x30000000 0 0x10000000>;
};
};
};
/include/ "fsl/t4240si-post.dtsi"

2
arch/powerpc/boot/io.h
View File

@ -1,5 +1,5 @@
#ifndef _IO_H
#define __IO_H
#define _IO_H
#include "types.h"

4
arch/powerpc/configs/corenet32_smp_defconfig
View File

@ -139,8 +139,9 @@ CONFIG_EDAC=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_MPC85XX=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_DS3232=y
CONFIG_RTC_DRV_CMOS=y
CONFIG_UIO=y
CONFIG_STAGING=y
CONFIG_VIRT_DRIVERS=y
@ -179,3 +180,4 @@ CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DEV_FSL_CAAM=y
CONFIG_FSL_CORENET_CF=y

5
arch/powerpc/configs/corenet64_smp_defconfig
View File

@ -123,6 +123,10 @@ CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_DS3232=y
CONFIG_EDAC=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_DMADEVICES=y
@ -175,3 +179,4 @@ CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DEV_FSL_CAAM=y
CONFIG_FSL_CORENET_CF=y

3
arch/powerpc/configs/mpc85xx_defconfig
View File

@ -209,6 +209,9 @@ CONFIG_MMC_SDHCI_OF_ESDHC=y
CONFIG_EDAC=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_DS3232=y
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_DMADEVICES=y

3
arch/powerpc/configs/mpc85xx_smp_defconfig
View File

@ -210,6 +210,9 @@ CONFIG_MMC_SDHCI_OF_ESDHC=y
CONFIG_EDAC=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_DS3232=y
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_DMADEVICES=y

31
arch/powerpc/include/asm/cputable.h
View File

@ -195,8 +195,7 @@ extern const char *powerpc_base_platform;
#define CPU_FTR_PPCAS_ARCH_V2 (CPU_FTR_NOEXECUTE | CPU_FTR_NODSISRALIGN)
#define MMU_FTR_PPCAS_ARCH_V2 (MMU_FTR_SLB | MMU_FTR_TLBIEL | \
MMU_FTR_16M_PAGE)
#define MMU_FTR_PPCAS_ARCH_V2 (MMU_FTR_TLBIEL | MMU_FTR_16M_PAGE)
/* We only set the altivec features if the kernel was compiled with altivec
* support
@ -268,10 +267,6 @@ extern const char *powerpc_base_platform;
#define CPU_FTR_MAYBE_CAN_NAP 0
#endif
#define CLASSIC_PPC (!defined(CONFIG_8xx) && !defined(CONFIG_4xx) && \
!defined(CONFIG_POWER3) && !defined(CONFIG_POWER4) && \
!defined(CONFIG_BOOKE))
#define CPU_FTRS_PPC601 (CPU_FTR_COMMON | CPU_FTR_601 | \
CPU_FTR_COHERENT_ICACHE | CPU_FTR_UNIFIED_ID_CACHE)
#define CPU_FTRS_603 (CPU_FTR_COMMON | \
@ -396,15 +391,10 @@ extern const char *powerpc_base_platform;
CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \
CPU_FTR_DBELL | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
CPU_FTR_DEBUG_LVL_EXC | CPU_FTR_EMB_HV | CPU_FTR_ALTIVEC_COMP | \
CPU_FTR_CELL_TB_BUG)
CPU_FTR_CELL_TB_BUG | CPU_FTR_SMT)
#define CPU_FTRS_GENERIC_32 (CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN)
/* 64-bit CPUs */
#define CPU_FTRS_POWER3 (CPU_FTR_USE_TB | \
CPU_FTR_IABR | CPU_FTR_PPC_LE)
#define CPU_FTRS_RS64 (CPU_FTR_USE_TB | \
CPU_FTR_IABR | \
CPU_FTR_MMCRA | CPU_FTR_CTRL)
#define CPU_FTRS_POWER4 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_MMCRA | CPU_FTR_CP_USE_DCBTZ | \
@ -467,15 +457,14 @@ extern const char *powerpc_base_platform;
#define CPU_FTRS_POSSIBLE (CPU_FTRS_E6500 | CPU_FTRS_E5500 | CPU_FTRS_A2)
#else
#define CPU_FTRS_POSSIBLE \
(CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 | \
CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_POWER6 | \
CPU_FTRS_POWER7 | CPU_FTRS_POWER8E | CPU_FTRS_POWER8 | \
CPU_FTRS_CELL | CPU_FTRS_PA6T | CPU_FTR_VSX)
(CPU_FTRS_POWER4 | CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | \
CPU_FTRS_POWER6 | CPU_FTRS_POWER7 | CPU_FTRS_POWER8E | \
CPU_FTRS_POWER8 | CPU_FTRS_CELL | CPU_FTRS_PA6T | CPU_FTR_VSX)
#endif
#else
enum {
CPU_FTRS_POSSIBLE =
#if CLASSIC_PPC
#ifdef CONFIG_PPC_BOOK3S_32
CPU_FTRS_PPC601 | CPU_FTRS_603 | CPU_FTRS_604 | CPU_FTRS_740_NOTAU |
CPU_FTRS_740 | CPU_FTRS_750 | CPU_FTRS_750FX1 |
CPU_FTRS_750FX2 | CPU_FTRS_750FX | CPU_FTRS_750GX |
@ -518,14 +507,14 @@ enum {
#define CPU_FTRS_ALWAYS (CPU_FTRS_E6500 & CPU_FTRS_E5500 & CPU_FTRS_A2)
#else
#define CPU_FTRS_ALWAYS \
(CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 & \
CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & CPU_FTRS_POWER6 & \
CPU_FTRS_POWER7 & CPU_FTRS_CELL & CPU_FTRS_PA6T & CPU_FTRS_POSSIBLE)
(CPU_FTRS_POWER4 & CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & \
CPU_FTRS_POWER6 & CPU_FTRS_POWER7 & CPU_FTRS_CELL & \
CPU_FTRS_PA6T & CPU_FTRS_POSSIBLE)
#endif
#else
enum {
CPU_FTRS_ALWAYS =
#if CLASSIC_PPC
#ifdef CONFIG_PPC_BOOK3S_32
CPU_FTRS_PPC601 & CPU_FTRS_603 & CPU_FTRS_604 & CPU_FTRS_740_NOTAU &
CPU_FTRS_740 & CPU_FTRS_750 & CPU_FTRS_750FX1 &
CPU_FTRS_750FX2 & CPU_FTRS_750FX & CPU_FTRS_750GX &

68
arch/powerpc/include/asm/eeh.h
View File

@ -25,6 +25,7 @@
#include <linux/list.h>
#include <linux/string.h>
#include <linux/time.h>
#include <linux/atomic.h>
struct pci_dev;
struct pci_bus;
@ -33,10 +34,11 @@ struct device_node;
#ifdef CONFIG_EEH
/* EEH subsystem flags */
#define EEH_ENABLED 0x1 /* EEH enabled */
#define EEH_FORCE_DISABLED 0x2 /* EEH disabled */
#define EEH_PROBE_MODE_DEV 0x4 /* From PCI device */
#define EEH_PROBE_MODE_DEVTREE 0x8 /* From device tree */
#define EEH_ENABLED 0x01 /* EEH enabled */
#define EEH_FORCE_DISABLED 0x02 /* EEH disabled */
#define EEH_PROBE_MODE_DEV 0x04 /* From PCI device */
#define EEH_PROBE_MODE_DEVTREE 0x08 /* From device tree */
#define EEH_ENABLE_IO_FOR_LOG 0x10 /* Enable IO for log */
/*
* Delay for PE reset, all in ms
@ -84,7 +86,9 @@ struct eeh_pe {
int freeze_count; /* Times of froze up */
struct timeval tstamp; /* Time on first-time freeze */
int false_positives; /* Times of reported #ff's */
atomic_t pass_dev_cnt; /* Count of passed through devs */
struct eeh_pe *parent; /* Parent PE */
void *data; /* PE auxillary data */
struct list_head child_list; /* Link PE to the child list */
struct list_head edevs; /* Link list of EEH devices */
struct list_head child; /* Child PEs */
@ -93,6 +97,11 @@ struct eeh_pe {
#define eeh_pe_for_each_dev(pe, edev, tmp) \
list_for_each_entry_safe(edev, tmp, &pe->edevs, list)
static inline bool eeh_pe_passed(struct eeh_pe *pe)
{
return pe ? !!atomic_read(&pe->pass_dev_cnt) : false;
}
/*
* The struct is used to trace EEH state for the associated
* PCI device node or PCI device. In future, it might
@ -165,6 +174,11 @@ enum {
#define EEH_STATE_DMA_ACTIVE (1 << 4) /* Active DMA */
#define EEH_STATE_MMIO_ENABLED (1 << 5) /* MMIO enabled */
#define EEH_STATE_DMA_ENABLED (1 << 6) /* DMA enabled */
#define EEH_PE_STATE_NORMAL 0 /* Normal state */
#define EEH_PE_STATE_RESET 1 /* PE reset asserted */
#define EEH_PE_STATE_STOPPED_IO_DMA 2 /* Frozen PE */
#define EEH_PE_STATE_STOPPED_DMA 4 /* Stopped DMA, Enabled IO */
#define EEH_PE_STATE_UNAVAIL 5 /* Unavailable */
#define EEH_RESET_DEACTIVATE 0 /* Deactivate the PE reset */
#define EEH_RESET_HOT 1 /* Hot reset */
#define EEH_RESET_FUNDAMENTAL 3 /* Fundamental reset */
@ -194,36 +208,28 @@ extern int eeh_subsystem_flags;
extern struct eeh_ops *eeh_ops;
extern raw_spinlock_t confirm_error_lock;
static inline bool eeh_enabled(void)
{
if ((eeh_subsystem_flags & EEH_FORCE_DISABLED) ||
!(eeh_subsystem_flags & EEH_ENABLED))
return false;
return true;
}
static inline void eeh_set_enable(bool mode)
{
if (mode)
eeh_subsystem_flags |= EEH_ENABLED;
else
eeh_subsystem_flags &= ~EEH_ENABLED;
}
static inline void eeh_probe_mode_set(int flag)
static inline void eeh_add_flag(int flag)
{
eeh_subsystem_flags |= flag;
}
static inline int eeh_probe_mode_devtree(void)
static inline void eeh_clear_flag(int flag)
{
return (eeh_subsystem_flags & EEH_PROBE_MODE_DEVTREE);
eeh_subsystem_flags &= ~flag;
}
static inline int eeh_probe_mode_dev(void)
static inline bool eeh_has_flag(int flag)
{
return (eeh_subsystem_flags & EEH_PROBE_MODE_DEV);
return !!(eeh_subsystem_flags & flag);
}
static inline bool eeh_enabled(void)
{
if (eeh_has_flag(EEH_FORCE_DISABLED) ||
!eeh_has_flag(EEH_ENABLED))
return false;
return true;
}
static inline void eeh_serialize_lock(unsigned long *flags)
@ -243,6 +249,7 @@ static inline void eeh_serialize_unlock(unsigned long flags)
#define EEH_MAX_ALLOWED_FREEZES 5
typedef void *(*eeh_traverse_func)(void *data, void *flag);
void eeh_set_pe_aux_size(int size);
int eeh_phb_pe_create(struct pci_controller *phb);
struct eeh_pe *eeh_phb_pe_get(struct pci_controller *phb);
struct eeh_pe *eeh_pe_get(struct eeh_dev *edev);
@ -272,6 +279,13 @@ void eeh_add_device_late(struct pci_dev *);
void eeh_add_device_tree_late(struct pci_bus *);
void eeh_add_sysfs_files(struct pci_bus *);
void eeh_remove_device(struct pci_dev *);
int eeh_dev_open(struct pci_dev *pdev);
void eeh_dev_release(struct pci_dev *pdev);
struct eeh_pe *eeh_iommu_group_to_pe(struct iommu_group *group);
int eeh_pe_set_option(struct eeh_pe *pe, int option);
int eeh_pe_get_state(struct eeh_pe *pe);
int eeh_pe_reset(struct eeh_pe *pe, int option);
int eeh_pe_configure(struct eeh_pe *pe);
/**
* EEH_POSSIBLE_ERROR() -- test for possible MMIO failure.
@ -295,8 +309,6 @@ static inline bool eeh_enabled(void)
return false;
}
static inline void eeh_set_enable(bool mode) { }
static inline int eeh_init(void)
{
return 0;

14
arch/powerpc/include/asm/exception-64s.h
View File

@ -425,6 +425,8 @@ label##_relon_hv: \
#define SOFTEN_VALUE_0xa00 PACA_IRQ_DBELL
#define SOFTEN_VALUE_0xe80 PACA_IRQ_DBELL
#define SOFTEN_VALUE_0xe82 PACA_IRQ_DBELL
#define SOFTEN_VALUE_0xe60 PACA_IRQ_HMI
#define SOFTEN_VALUE_0xe62 PACA_IRQ_HMI
#define __SOFTEN_TEST(h, vec) \
lbz r10,PACASOFTIRQEN(r13); \
@ -513,8 +515,11 @@ label##_relon_hv: \
* runlatch, etc...
*/
/* Exception addition: Hard disable interrupts */
#define DISABLE_INTS RECONCILE_IRQ_STATE(r10,r11)
/*
* This addition reconciles our actual IRQ state with the various software
* flags that track it. This may call C code.
*/
#define ADD_RECONCILE RECONCILE_IRQ_STATE(r10,r11)
#define ADD_NVGPRS \
bl save_nvgprs
@ -532,6 +537,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_CTRL)
.globl label##_common; \
label##_common: \
EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \
/* Volatile regs are potentially clobbered here */ \
additions; \
addi r3,r1,STACK_FRAME_OVERHEAD; \
bl hdlr; \
@ -539,7 +545,7 @@ label##_common: \
#define STD_EXCEPTION_COMMON(trap, label, hdlr) \
EXCEPTION_COMMON(trap, label, hdlr, ret_from_except, \
ADD_NVGPRS;DISABLE_INTS)
ADD_NVGPRS;ADD_RECONCILE)
/*
* Like STD_EXCEPTION_COMMON, but for exceptions that can occur
@ -548,7 +554,7 @@ label##_common: \
*/
#define STD_EXCEPTION_COMMON_ASYNC(trap, label, hdlr) \
EXCEPTION_COMMON(trap, label, hdlr, ret_from_except_lite, \
FINISH_NAP;DISABLE_INTS;RUNLATCH_ON)
FINISH_NAP;ADD_RECONCILE;RUNLATCH_ON)
/*
* When the idle code in power4_idle puts the CPU into NAP mode,

1
arch/powerpc/include/asm/fs_pd.h
View File

@ -28,7 +28,6 @@
#ifdef CONFIG_8xx
#include <asm/8xx_immap.h>
#include <asm/mpc8xx.h>
extern immap_t __iomem *mpc8xx_immr;

1
arch/powerpc/include/asm/hardirq.h
View File

@ -11,6 +11,7 @@ typedef struct {
unsigned int pmu_irqs;
unsigned int mce_exceptions;
unsigned int spurious_irqs;
unsigned int hmi_exceptions;
#ifdef CONFIG_PPC_DOORBELL
unsigned int doorbell_irqs;
#endif

1
arch/powerpc/include/asm/hw_irq.h
View File

@ -25,6 +25,7 @@
#define PACA_IRQ_EE 0x04
#define PACA_IRQ_DEC 0x08 /* Or FIT */
#define PACA_IRQ_EE_EDGE 0x10 /* BookE only */
#define PACA_IRQ_HMI 0x20
#endif /* CONFIG_PPC64 */

8
arch/powerpc/include/asm/irqflags.h
View File

@ -32,9 +32,8 @@
#endif
/*
* Most of the CPU's IRQ-state tracing is done from assembly code; we
* have to call a C function so call a wrapper that saves all the
* C-clobbered registers.
* These are calls to C code, so the caller must be prepared for volatiles to
* be clobbered.
*/
#define TRACE_ENABLE_INTS TRACE_WITH_FRAME_BUFFER(trace_hardirqs_on)
#define TRACE_DISABLE_INTS TRACE_WITH_FRAME_BUFFER(trace_hardirqs_off)
@ -42,6 +41,9 @@
/*
* This is used by assembly code to soft-disable interrupts first and
* reconcile irq state.
*
* NB: This may call C code, so the caller must be prepared for volatiles to
* be clobbered.
*/
#define RECONCILE_IRQ_STATE(__rA, __rB) \
lbz __rA,PACASOFTIRQEN(r13); \

9
arch/powerpc/include/asm/jump_label.h
View File

@ -10,6 +10,7 @@
* 2 of the License, or (at your option) any later version.
*/
#ifndef __ASSEMBLY__
#include <linux/types.h>
#include <asm/feature-fixups.h>
@ -42,4 +43,12 @@ struct jump_entry {
jump_label_t key;
};
#else
#define ARCH_STATIC_BRANCH(LABEL, KEY) \
1098: nop; \
.pushsection __jump_table, "aw"; \
FTR_ENTRY_LONG 1098b, LABEL, KEY; \
.popsection
#endif
#endif /* _ASM_POWERPC_JUMP_LABEL_H */

1
arch/powerpc/include/asm/kvm_asm.h
View File

@ -98,6 +98,7 @@
#define BOOK3S_INTERRUPT_H_DATA_STORAGE 0xe00
#define BOOK3S_INTERRUPT_H_INST_STORAGE 0xe20
#define BOOK3S_INTERRUPT_H_EMUL_ASSIST 0xe40
#define BOOK3S_INTERRUPT_HMI 0xe60
#define BOOK3S_INTERRUPT_H_DOORBELL 0xe80
#define BOOK3S_INTERRUPT_PERFMON 0xf00
#define BOOK3S_INTERRUPT_ALTIVEC 0xf20

5
arch/powerpc/include/asm/machdep.h
View File

@ -174,6 +174,10 @@ struct machdep_calls {
/* Exception handlers */
int (*system_reset_exception)(struct pt_regs *regs);
int (*machine_check_exception)(struct pt_regs *regs);
int (*handle_hmi_exception)(struct pt_regs *regs);
/* Early exception handlers called in realmode */
int (*hmi_exception_early)(struct pt_regs *regs);
/* Called during machine check exception to retrive fixup address. */
bool (*mce_check_early_recovery)(struct pt_regs *regs);
@ -366,6 +370,7 @@ static inline void log_error(char *buf, unsigned int err_type, int fatal)
} \
__define_initcall(__machine_initcall_##mach##_##fn, id);
#define machine_early_initcall(mach, fn) __define_machine_initcall(mach, fn, early)
#define machine_core_initcall(mach, fn) __define_machine_initcall(mach, fn, 1)
#define machine_core_initcall_sync(mach, fn) __define_machine_initcall(mach, fn, 1s)
#define machine_postcore_initcall(mach, fn) __define_machine_initcall(mach, fn, 2)

22
arch/powerpc/include/asm/mmu-hash64.h
View File

@ -24,26 +24,6 @@
#include <asm/bug.h>
#include <asm/processor.h>
/*
* Segment table
*/
#define STE_ESID_V 0x80
#define STE_ESID_KS 0x20
#define STE_ESID_KP 0x10
#define STE_ESID_N 0x08
#define STE_VSID_SHIFT 12
/* Location of cpu0's segment table */
#define STAB0_PAGE 0x8
#define STAB0_OFFSET (STAB0_PAGE << 12)
#define STAB0_PHYS_ADDR (STAB0_OFFSET + PHYSICAL_START)
#ifndef __ASSEMBLY__
extern char initial_stab[];
#endif /* ! __ASSEMBLY */
/*
* SLB
*/
@ -370,10 +350,8 @@ extern void hpte_init_lpar(void);
extern void hpte_init_beat(void);
extern void hpte_init_beat_v3(void);
extern void stabs_alloc(void);
extern void slb_initialize(void);
extern void slb_flush_and_rebolt(void);
extern void stab_initialize(unsigned long stab);
extern void slb_vmalloc_update(void);
extern void slb_set_size(u16 size);

8
arch/powerpc/include/asm/mmu.h
View File

@ -64,9 +64,9 @@
*/
#define MMU_FTR_USE_PAIRED_MAS ASM_CONST(0x01000000)
/* MMU is SLB-based
/* Doesn't support the B bit (1T segment) in SLBIE
*/
#define MMU_FTR_SLB ASM_CONST(0x02000000)
#define MMU_FTR_NO_SLBIE_B ASM_CONST(0x02000000)
/* Support 16M large pages
*/
@ -88,10 +88,6 @@
*/
#define MMU_FTR_1T_SEGMENT ASM_CONST(0x40000000)
/* Doesn't support the B bit (1T segment) in SLBIE
*/
#define MMU_FTR_NO_SLBIE_B ASM_CONST(0x80000000)
/* MMU feature bit sets for various CPUs */
#define MMU_FTRS_DEFAULT_HPTE_ARCH_V2 \
MMU_FTR_HPTE_TABLE | MMU_FTR_PPCAS_ARCH_V2

6
arch/powerpc/include/asm/mmu_context.h
View File

@ -18,7 +18,6 @@ extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
extern void destroy_context(struct mm_struct *mm);
extern void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next);
extern void switch_stab(struct task_struct *tsk, struct mm_struct *mm);
extern void switch_slb(struct task_struct *tsk, struct mm_struct *mm);
extern void set_context(unsigned long id, pgd_t *pgd);
@ -77,10 +76,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
* sub architectures.
*/
#ifdef CONFIG_PPC_STD_MMU_64
if (mmu_has_feature(MMU_FTR_SLB))
switch_slb(tsk, next);
else
switch_stab(tsk, next);
switch_slb(tsk, next);
#else
/* Out of line for now */
switch_mmu_context(prev, next);

2
arch/powerpc/include/asm/mpc85xx.h
View File

@ -77,6 +77,8 @@
#define SVR_T1020 0x852100
#define SVR_T1021 0x852101
#define SVR_T1022 0x852102
#define SVR_T2080 0x853000
#define SVR_T2081 0x853100
#define SVR_8610 0x80A000
#define SVR_8641 0x809000

12
arch/powerpc/include/asm/mpc8xx.h
View File

@ -1,12 +0,0 @@
/* This is the single file included by all MPC8xx build options.
* Since there are many different boards and no standard configuration,
* we have a unique include file for each. Rather than change every
* file that has to include MPC8xx configuration, they all include
* this one and the configuration switching is done here.
*/
#ifndef __CONFIG_8xx_DEFS
#define __CONFIG_8xx_DEFS
extern struct mpc8xx_pcmcia_ops m8xx_pcmcia_ops;
#endif /* __CONFIG_8xx_DEFS */

194
arch/powerpc/include/asm/opal.h
View File

@ -147,6 +147,8 @@ struct opal_sg_list {
#define OPAL_SET_PARAM 90
#define OPAL_DUMP_RESEND 91
#define OPAL_DUMP_INFO2 94
#define OPAL_PCI_EEH_FREEZE_SET 97
#define OPAL_HANDLE_HMI 98
#ifndef __ASSEMBLY__
@ -170,7 +172,11 @@ enum OpalFreezeState {
enum OpalEehFreezeActionToken {
OPAL_EEH_ACTION_CLEAR_FREEZE_MMIO = 1,
OPAL_EEH_ACTION_CLEAR_FREEZE_DMA = 2,
OPAL_EEH_ACTION_CLEAR_FREEZE_ALL = 3
OPAL_EEH_ACTION_CLEAR_FREEZE_ALL = 3,
OPAL_EEH_ACTION_SET_FREEZE_MMIO = 1,
OPAL_EEH_ACTION_SET_FREEZE_DMA = 2,
OPAL_EEH_ACTION_SET_FREEZE_ALL = 3
};
enum OpalPciStatusToken {
@ -240,6 +246,7 @@ enum OpalMessageType {
OPAL_MSG_MEM_ERR,
OPAL_MSG_EPOW,
OPAL_MSG_SHUTDOWN,
OPAL_MSG_HMI_EVT,
OPAL_MSG_TYPE_MAX,
};
@ -340,6 +347,12 @@ enum OpalMveEnableAction {
OPAL_ENABLE_MVE = 1
};
enum OpalM64EnableAction {
OPAL_DISABLE_M64 = 0,
OPAL_ENABLE_M64_SPLIT = 1,
OPAL_ENABLE_M64_NON_SPLIT = 2
};
enum OpalPciResetScope {
OPAL_PHB_COMPLETE = 1, OPAL_PCI_LINK = 2, OPAL_PHB_ERROR = 3,
OPAL_PCI_HOT_RESET = 4, OPAL_PCI_FUNDAMENTAL_RESET = 5,
@ -502,6 +515,50 @@ struct OpalMemoryErrorData {
} u;
};
/* HMI interrupt event */
enum OpalHMI_Version {
OpalHMIEvt_V1 = 1,
};
enum OpalHMI_Severity {
OpalHMI_SEV_NO_ERROR = 0,
OpalHMI_SEV_WARNING = 1,
OpalHMI_SEV_ERROR_SYNC = 2,
OpalHMI_SEV_FATAL = 3,
};
enum OpalHMI_Disposition {
OpalHMI_DISPOSITION_RECOVERED = 0,
OpalHMI_DISPOSITION_NOT_RECOVERED = 1,
};
enum OpalHMI_ErrType {
OpalHMI_ERROR_MALFUNC_ALERT = 0,
OpalHMI_ERROR_PROC_RECOV_DONE,
OpalHMI_ERROR_PROC_RECOV_DONE_AGAIN,
OpalHMI_ERROR_PROC_RECOV_MASKED,
OpalHMI_ERROR_TFAC,
OpalHMI_ERROR_TFMR_PARITY,
OpalHMI_ERROR_HA_OVERFLOW_WARN,
OpalHMI_ERROR_XSCOM_FAIL,
OpalHMI_ERROR_XSCOM_DONE,
OpalHMI_ERROR_SCOM_FIR,
OpalHMI_ERROR_DEBUG_TRIG_FIR,
OpalHMI_ERROR_HYP_RESOURCE,
};
struct OpalHMIEvent {
uint8_t version; /* 0x00 */
uint8_t severity; /* 0x01 */
uint8_t type; /* 0x02 */
uint8_t disposition; /* 0x03 */
uint8_t reserved_1[4]; /* 0x04 */
__be64 hmer;
/* TFMR register. Valid only for TFAC and TFMR_PARITY error type. */
__be64 tfmr;
};
enum {
OPAL_P7IOC_DIAG_TYPE_NONE = 0,
OPAL_P7IOC_DIAG_TYPE_RGC = 1,
@ -513,40 +570,40 @@ enum {
};
struct OpalIoP7IOCErrorData {
uint16_t type;
__be16 type;
/* GEM */
uint64_t gemXfir;
uint64_t gemRfir;
uint64_t gemRirqfir;
uint64_t gemMask;
uint64_t gemRwof;
__be64 gemXfir;
__be64 gemRfir;
__be64 gemRirqfir;
__be64 gemMask;
__be64 gemRwof;
/* LEM */
uint64_t lemFir;
uint64_t lemErrMask;
uint64_t lemAction0;
uint64_t lemAction1;
uint64_t lemWof;
__be64 lemFir;
__be64 lemErrMask;
__be64 lemAction0;
__be64 lemAction1;
__be64 lemWof;
union {
struct OpalIoP7IOCRgcErrorData {
uint64_t rgcStatus; /* 3E1C10 */
uint64_t rgcLdcp; /* 3E1C18 */
__be64 rgcStatus; /* 3E1C10 */
__be64 rgcLdcp; /* 3E1C18 */
}rgc;
struct OpalIoP7IOCBiErrorData {
uint64_t biLdcp0; /* 3C0100, 3C0118 */
uint64_t biLdcp1; /* 3C0108, 3C0120 */
uint64_t biLdcp2; /* 3C0110, 3C0128 */
uint64_t biFenceStatus; /* 3C0130, 3C0130 */
__be64 biLdcp0; /* 3C0100, 3C0118 */
__be64 biLdcp1; /* 3C0108, 3C0120 */
__be64 biLdcp2; /* 3C0110, 3C0128 */
__be64 biFenceStatus; /* 3C0130, 3C0130 */
uint8_t biDownbound; /* BI Downbound or Upbound */
u8 biDownbound; /* BI Downbound or Upbound */
}bi;
struct OpalIoP7IOCCiErrorData {
uint64_t ciPortStatus; /* 3Dn008 */
uint64_t ciPortLdcp; /* 3Dn010 */
__be64 ciPortStatus; /* 3Dn008 */
__be64 ciPortLdcp; /* 3Dn010 */
uint8_t ciPort; /* Index of CI port: 0/1 */
u8 ciPort; /* Index of CI port: 0/1 */
}ci;
};
};
@ -578,60 +635,60 @@ struct OpalIoPhbErrorCommon {
struct OpalIoP7IOCPhbErrorData {
struct OpalIoPhbErrorCommon common;
uint32_t brdgCtl;
__be32 brdgCtl;
// P7IOC utl regs
uint32_t portStatusReg;
uint32_t rootCmplxStatus;
uint32_t busAgentStatus;
__be32 portStatusReg;
__be32 rootCmplxStatus;
__be32 busAgentStatus;
// P7IOC cfg regs
uint32_t deviceStatus;
uint32_t slotStatus;
uint32_t linkStatus;
uint32_t devCmdStatus;
uint32_t devSecStatus;
__be32 deviceStatus;
__be32 slotStatus;
__be32 linkStatus;
__be32 devCmdStatus;
__be32 devSecStatus;
// cfg AER regs
uint32_t rootErrorStatus;
uint32_t uncorrErrorStatus;
uint32_t corrErrorStatus;
uint32_t tlpHdr1;
uint32_t tlpHdr2;
uint32_t tlpHdr3;
uint32_t tlpHdr4;
uint32_t sourceId;
__be32 rootErrorStatus;
__be32 uncorrErrorStatus;
__be32 corrErrorStatus;
__be32 tlpHdr1;
__be32 tlpHdr2;
__be32 tlpHdr3;
__be32 tlpHdr4;
__be32 sourceId;
uint32_t rsv3;
__be32 rsv3;
// Record data about the call to allocate a buffer.
uint64_t errorClass;
uint64_t correlator;
__be64 errorClass;
__be64 correlator;
//P7IOC MMIO Error Regs
uint64_t p7iocPlssr; // n120
uint64_t p7iocCsr; // n110
uint64_t lemFir; // nC00
uint64_t lemErrorMask; // nC18
uint64_t lemWOF; // nC40
uint64_t phbErrorStatus; // nC80
uint64_t phbFirstErrorStatus; // nC88
uint64_t phbErrorLog0; // nCC0
uint64_t phbErrorLog1; // nCC8
uint64_t mmioErrorStatus; // nD00
uint64_t mmioFirstErrorStatus; // nD08
uint64_t mmioErrorLog0; // nD40
uint64_t mmioErrorLog1; // nD48
uint64_t dma0ErrorStatus; // nD80
uint64_t dma0FirstErrorStatus; // nD88
uint64_t dma0ErrorLog0; // nDC0
uint64_t dma0ErrorLog1; // nDC8
uint64_t dma1ErrorStatus; // nE00
uint64_t dma1FirstErrorStatus; // nE08
uint64_t dma1ErrorLog0; // nE40
uint64_t dma1ErrorLog1; // nE48
uint64_t pestA[OPAL_P7IOC_NUM_PEST_REGS];
uint64_t pestB[OPAL_P7IOC_NUM_PEST_REGS];
__be64 p7iocPlssr; // n120
__be64 p7iocCsr; // n110
__be64 lemFir; // nC00
__be64 lemErrorMask; // nC18
__be64 lemWOF; // nC40
__be64 phbErrorStatus; // nC80
__be64 phbFirstErrorStatus; // nC88
__be64 phbErrorLog0; // nCC0
__be64 phbErrorLog1; // nCC8
__be64 mmioErrorStatus; // nD00
__be64 mmioFirstErrorStatus; // nD08
__be64 mmioErrorLog0; // nD40
__be64 mmioErrorLog1; // nD48
__be64 dma0ErrorStatus; // nD80
__be64 dma0FirstErrorStatus; // nD88
__be64 dma0ErrorLog0; // nDC0
__be64 dma0ErrorLog1; // nDC8
__be64 dma1ErrorStatus; // nE00
__be64 dma1FirstErrorStatus; // nE08
__be64 dma1ErrorLog0; // nE40
__be64 dma1ErrorLog1; // nE48
__be64 pestA[OPAL_P7IOC_NUM_PEST_REGS];
__be64 pestB[OPAL_P7IOC_NUM_PEST_REGS];
};
struct OpalIoPhb3ErrorData {
@ -758,6 +815,8 @@ int64_t opal_pci_eeh_freeze_status(uint64_t phb_id, uint64_t pe_number,
__be64 *phb_status);
int64_t opal_pci_eeh_freeze_clear(uint64_t phb_id, uint64_t pe_number,
uint64_t eeh_action_token);
int64_t opal_pci_eeh_freeze_set(uint64_t phb_id, uint64_t pe_number,
uint64_t eeh_action_token);
int64_t opal_pci_shpc(uint64_t phb_id, uint64_t shpc_action, uint8_t *state);
@ -768,7 +827,7 @@ int64_t opal_pci_set_phb_mem_window(uint64_t phb_id, uint16_t window_type,
uint16_t window_num,
uint64_t starting_real_address,
uint64_t starting_pci_address,
uint16_t segment_size);
uint64_t size);
int64_t opal_pci_map_pe_mmio_window(uint64_t phb_id, uint16_t pe_number,
uint16_t window_type, uint16_t window_num,
uint16_t segment_num);
@ -860,6 +919,7 @@ int64_t opal_get_param(uint64_t token, uint32_t param_id, uint64_t buffer,
int64_t opal_set_param(uint64_t token, uint32_t param_id, uint64_t buffer,
uint64_t length);
int64_t opal_sensor_read(uint32_t sensor_hndl, int token, __be32 *sensor_data);
int64_t opal_handle_hmi(void);
/* Internal functions */
extern int early_init_dt_scan_opal(unsigned long node, const char *uname,
@ -902,6 +962,8 @@ extern void opal_msglog_init(void);
extern int opal_machine_check(struct pt_regs *regs);
extern bool opal_mce_check_early_recovery(struct pt_regs *regs);
extern int opal_hmi_exception_early(struct pt_regs *regs);
extern int opal_handle_hmi_exception(struct pt_regs *regs);
extern void opal_shutdown(void);
extern int opal_resync_timebase(void);

1
arch/powerpc/include/asm/oprofile_impl.h
View File

@ -61,7 +61,6 @@ struct op_powerpc_model {
};
extern struct op_powerpc_model op_model_fsl_emb;
extern struct op_powerpc_model op_model_rs64;
extern struct op_powerpc_model op_model_power4;
extern struct op_powerpc_model op_model_7450;
extern struct op_powerpc_model op_model_cell;

5
arch/powerpc/include/asm/paca.h
View File

@ -78,10 +78,6 @@ struct paca_struct {
u64 kernel_toc; /* Kernel TOC address */
u64 kernelbase; /* Base address of kernel */
u64 kernel_msr; /* MSR while running in kernel */
#ifdef CONFIG_PPC_STD_MMU_64
u64 stab_real; /* Absolute address of segment table */
u64 stab_addr; /* Virtual address of segment table */
#endif /* CONFIG_PPC_STD_MMU_64 */
void *emergency_sp; /* pointer to emergency stack */
u64 data_offset; /* per cpu data offset */
s16 hw_cpu_id; /* Physical processor number */
@ -171,6 +167,7 @@ struct paca_struct {
* and already using emergency stack.
*/
u16 in_mce;
u8 hmi_event_available; /* HMI event is available */
#endif
/* Stuff for accurate time accounting */

5
arch/powerpc/include/asm/perf_event_server.h
View File

@ -19,6 +19,8 @@
#define MAX_EVENT_ALTERNATIVES 8
#define MAX_LIMITED_HWCOUNTERS 2
struct perf_event;
/*
* This struct provides the constants and functions needed to
* describe the PMU on a particular POWER-family CPU.
@ -30,7 +32,8 @@ struct power_pmu {
unsigned long add_fields;
unsigned long test_adder;
int (*compute_mmcr)(u64 events[], int n_ev,
unsigned int hwc[], unsigned long mmcr[]);
unsigned int hwc[], unsigned long mmcr[],
struct perf_event *pevents[]);
int (*get_constraint)(u64 event_id, unsigned long *mskp,
unsigned long *valp);
int (*get_alternatives)(u64 event_id, unsigned int flags,

9
arch/powerpc/include/asm/ppc-opcode.h
View File

@ -150,8 +150,10 @@
#define PPC_INST_MCRXR_MASK 0xfc0007fe
#define PPC_INST_MFSPR_PVR 0x7c1f42a6
#define PPC_INST_MFSPR_PVR_MASK 0xfc1fffff
#define PPC_INST_MFTMR 0x7c0002dc
#define PPC_INST_MSGSND 0x7c00019c
#define PPC_INST_MSGSNDP 0x7c00011c
#define PPC_INST_MTTMR 0x7c0003dc
#define PPC_INST_NOP 0x60000000
#define PPC_INST_POPCNTB 0x7c0000f4
#define PPC_INST_POPCNTB_MASK 0xfc0007fe
@ -369,4 +371,11 @@
#define TABORT(r) stringify_in_c(.long PPC_INST_TABORT \
| __PPC_RA(r))
/* book3e thread control instructions */
#define TMRN(x) ((((x) & 0x1f) << 16) | (((x) & 0x3e0) << 6))
#define MTTMR(tmr, r) stringify_in_c(.long PPC_INST_MTTMR | \
TMRN(tmr) | ___PPC_RS(r))
#define MFTMR(tmr, r) stringify_in_c(.long PPC_INST_MFTMR | \
TMRN(tmr) | ___PPC_RT(r))
#endif /* _ASM_POWERPC_PPC_OPCODE_H */

2
arch/powerpc/include/asm/pte-fsl-booke.h
View File

@ -37,5 +37,7 @@
#define _PMD_PRESENT_MASK (PAGE_MASK)
#define _PMD_BAD (~PAGE_MASK)
#define PTE_WIMGE_SHIFT (6)
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_PTE_FSL_BOOKE_H */

5
arch/powerpc/include/asm/pte-hash64-64k.h
View File

@ -75,7 +75,8 @@
(((pte) & _PAGE_COMBO)? MMU_PAGE_4K: MMU_PAGE_64K)
#define remap_4k_pfn(vma, addr, pfn, prot) \
remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, \
__pgprot(pgprot_val((prot)) | _PAGE_4K_PFN))
(WARN_ON(((pfn) >= (1UL << (64 - PTE_RPN_SHIFT)))) ? -EINVAL : \
remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, \
__pgprot(pgprot_val((prot)) | _PAGE_4K_PFN)))
#endif /* __ASSEMBLY__ */

2
arch/powerpc/include/asm/reg.h
View File

@ -254,7 +254,7 @@
#define DSISR_PROTFAULT 0x08000000 /* protection fault */
#define DSISR_ISSTORE 0x02000000 /* access was a store */
#define DSISR_DABRMATCH 0x00400000 /* hit data breakpoint */
#define DSISR_NOSEGMENT 0x00200000 /* STAB/SLB miss */
#define DSISR_NOSEGMENT 0x00200000 /* SLB miss */
#define DSISR_KEYFAULT 0x00200000 /* Key fault */
#define SPRN_TBRL 0x10C /* Time Base Read Lower Register (user, R/O) */
#define SPRN_TBRU 0x10D /* Time Base Read Upper Register (user, R/O) */

57
arch/powerpc/include/asm/reg_booke.h
View File

@ -15,16 +15,28 @@
#ifndef __ASM_POWERPC_REG_BOOKE_H__
#define __ASM_POWERPC_REG_BOOKE_H__
#include <asm/ppc-opcode.h>
/* Machine State Register (MSR) Fields */
#define MSR_GS (1<<28) /* Guest state */
#define MSR_UCLE (1<<26) /* User-mode cache lock enable */
#define MSR_SPE (1<<25) /* Enable SPE */
#define MSR_DWE (1<<10) /* Debug Wait Enable */
#define MSR_UBLE (1<<10) /* BTB lock enable (e500) */
#define MSR_IS MSR_IR /* Instruction Space */
#define MSR_DS MSR_DR /* Data Space */
#define MSR_PMM (1<<2) /* Performance monitor mark bit */
#define MSR_CM (1<<31) /* Computation Mode (0=32-bit, 1=64-bit) */
#define MSR_GS_LG 28 /* Guest state */
#define MSR_UCLE_LG 26 /* User-mode cache lock enable */
#define MSR_SPE_LG 25 /* Enable SPE */
#define MSR_DWE_LG 10 /* Debug Wait Enable */
#define MSR_UBLE_LG 10 /* BTB lock enable (e500) */
#define MSR_IS_LG MSR_IR_LG /* Instruction Space */
#define MSR_DS_LG MSR_DR_LG /* Data Space */
#define MSR_PMM_LG 2 /* Performance monitor mark bit */
#define MSR_CM_LG 31 /* Computation Mode (0=32-bit, 1=64-bit) */
#define MSR_GS __MASK(MSR_GS_LG)
#define MSR_UCLE __MASK(MSR_UCLE_LG)
#define MSR_SPE __MASK(MSR_SPE_LG)
#define MSR_DWE __MASK(MSR_DWE_LG)
#define MSR_UBLE __MASK(MSR_UBLE_LG)
#define MSR_IS __MASK(MSR_IS_LG)
#define MSR_DS __MASK(MSR_DS_LG)
#define MSR_PMM __MASK(MSR_PMM_LG)
#define MSR_CM __MASK(MSR_CM_LG)
#if defined(CONFIG_PPC_BOOK3E_64)
#define MSR_64BIT MSR_CM
@ -260,7 +272,7 @@
/* e500mc */
#define MCSR_DCPERR_MC 0x20000000UL /* D-Cache Parity Error */
#define MCSR_L2MMU_MHIT 0x04000000UL /* Hit on multiple TLB entries */
#define MCSR_L2MMU_MHIT 0x08000000UL /* Hit on multiple TLB entries */
#define MCSR_NMI 0x00100000UL /* Non-Maskable Interrupt */
#define MCSR_MAV 0x00080000UL /* MCAR address valid */
#define MCSR_MEA 0x00040000UL /* MCAR is effective address */
@ -598,6 +610,13 @@
/* Bit definitions for L1CSR2. */
#define L1CSR2_DCWS 0x40000000 /* Data Cache write shadow */
/* Bit definitions for BUCSR. */
#define BUCSR_STAC_EN 0x01000000 /* Segment Target Address Cache */
#define BUCSR_LS_EN 0x00400000 /* Link Stack */
#define BUCSR_BBFI 0x00000200 /* Branch Buffer flash invalidate */
#define BUCSR_BPEN 0x00000001 /* Branch prediction enable */
#define BUCSR_INIT (BUCSR_STAC_EN | BUCSR_LS_EN | BUCSR_BBFI | BUCSR_BPEN)
/* Bit definitions for L2CSR0. */
#define L2CSR0_L2E 0x80000000 /* L2 Cache Enable */
#define L2CSR0_L2PE 0x40000000 /* L2 Cache Parity/ECC Enable */
@ -721,5 +740,23 @@
#define MMUBE1_VBE4 0x00000002
#define MMUBE1_VBE5 0x00000001
#define TMRN_IMSR0 0x120 /* Initial MSR Register 0 (e6500) */
#define TMRN_IMSR1 0x121 /* Initial MSR Register 1 (e6500) */
#define TMRN_INIA0 0x140 /* Next Instruction Address Register 0 */
#define TMRN_INIA1 0x141 /* Next Instruction Address Register 1 */
#define SPRN_TENSR 0x1b5 /* Thread Enable Status Register */
#define SPRN_TENS 0x1b6 /* Thread Enable Set Register */
#define SPRN_TENC 0x1b7 /* Thread Enable Clear Register */
#define TEN_THREAD(x) (1 << (x))
#ifndef __ASSEMBLY__
#define mftmr(rn) ({unsigned long rval; \
asm volatile(MFTMR(rn, %0) : "=r" (rval)); rval;})
#define mttmr(rn, v) asm volatile(MTTMR(rn, %0) : \
: "r" ((unsigned long)(v)) \
: "memory")
#endif /* !__ASSEMBLY__ */
#endif /* __ASM_POWERPC_REG_BOOKE_H__ */
#endif /* __KERNEL__ */

4
arch/powerpc/include/asm/systbl.h
View File

@ -77,10 +77,10 @@ SYSCALL_SPU(setreuid)
SYSCALL_SPU(setregid)
#define compat_sys_sigsuspend sys_sigsuspend
SYS32ONLY(sigsuspend)
COMPAT_SYS(sigpending)
SYSX(sys_ni_syscall,compat_sys_sigpending,sys_sigpending)
SYSCALL_SPU(sethostname)
COMPAT_SYS_SPU(setrlimit)
COMPAT_SYS(old_getrlimit)
SYSX(sys_ni_syscall,compat_sys_old_getrlimit,sys_old_getrlimit)
COMPAT_SYS_SPU(getrusage)
COMPAT_SYS_SPU(gettimeofday)
COMPAT_SYS_SPU(settimeofday)

45
arch/powerpc/include/asm/trace.h
View File

@ -99,6 +99,51 @@ TRACE_EVENT_FN(hcall_exit,
);
#endif
#ifdef CONFIG_PPC_POWERNV
extern void opal_tracepoint_regfunc(void);
extern void opal_tracepoint_unregfunc(void);
TRACE_EVENT_FN(opal_entry,
TP_PROTO(unsigned long opcode, unsigned long *args),
TP_ARGS(opcode, args),
TP_STRUCT__entry(
__field(unsigned long, opcode)
),
TP_fast_assign(
__entry->opcode = opcode;
),
TP_printk("opcode=%lu", __entry->opcode),
opal_tracepoint_regfunc, opal_tracepoint_unregfunc
);
TRACE_EVENT_FN(opal_exit,
TP_PROTO(unsigned long opcode, unsigned long retval),
TP_ARGS(opcode, retval),
TP_STRUCT__entry(
__field(unsigned long, opcode)
__field(unsigned long, retval)
),
TP_fast_assign(
__entry->opcode = opcode;
__entry->retval = retval;
),
TP_printk("opcode=%lu retval=%lu", __entry->opcode, __entry->retval),
opal_tracepoint_regfunc, opal_tracepoint_unregfunc
);
#endif
#endif /* _TRACE_POWERPC_H */
#undef TRACE_INCLUDE_PATH

2
arch/powerpc/kernel/asm-offsets.c
View File

@ -216,8 +216,6 @@ int main(void)
#endif /* CONFIG_PPC_BOOK3E */
#ifdef CONFIG_PPC_STD_MMU_64
DEFINE(PACASTABREAL, offsetof(struct paca_struct, stab_real));
DEFINE(PACASTABVIRT, offsetof(struct paca_struct, stab_addr));
DEFINE(PACASLBCACHE, offsetof(struct paca_struct, slb_cache));
DEFINE(PACASLBCACHEPTR, offsetof(struct paca_struct, slb_cache_ptr));
DEFINE(PACAVMALLOCSLLP, offsetof(struct paca_struct, vmalloc_sllp));

94
arch/powerpc/kernel/cputable.c
View File

@ -123,96 +123,6 @@ extern void __restore_cpu_e6500(void);
static struct cpu_spec __initdata cpu_specs[] = {
#ifdef CONFIG_PPC_BOOK3S_64
{ /* Power3 */
.pvr_mask = 0xffff0000,
.pvr_value = 0x00400000,
.cpu_name = "POWER3 (630)",
.cpu_features = CPU_FTRS_POWER3,
.cpu_user_features = COMMON_USER_PPC64|PPC_FEATURE_PPC_LE,
.mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
.pmc_type = PPC_PMC_IBM,
.oprofile_cpu_type = "ppc64/power3",
.oprofile_type = PPC_OPROFILE_RS64,
.platform = "power3",
},
{ /* Power3+ */
.pvr_mask = 0xffff0000,
.pvr_value = 0x00410000,
.cpu_name = "POWER3 (630+)",
.cpu_features = CPU_FTRS_POWER3,
.cpu_user_features = COMMON_USER_PPC64|PPC_FEATURE_PPC_LE,
.mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
.pmc_type = PPC_PMC_IBM,
.oprofile_cpu_type = "ppc64/power3",
.oprofile_type = PPC_OPROFILE_RS64,
.platform = "power3",
},
{ /* Northstar */
.pvr_mask = 0xffff0000,
.pvr_value = 0x00330000,
.cpu_name = "RS64-II (northstar)",
.cpu_features = CPU_FTRS_RS64,
.cpu_user_features = COMMON_USER_PPC64,
.mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
.pmc_type = PPC_PMC_IBM,
.oprofile_cpu_type = "ppc64/rs64",
.oprofile_type = PPC_OPROFILE_RS64,
.platform = "rs64",
},
{ /* Pulsar */
.pvr_mask = 0xffff0000,
.pvr_value = 0x00340000,
.cpu_name = "RS64-III (pulsar)",
.cpu_features = CPU_FTRS_RS64,
.cpu_user_features = COMMON_USER_PPC64,
.mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
.pmc_type = PPC_PMC_IBM,
.oprofile_cpu_type = "ppc64/rs64",
.oprofile_type = PPC_OPROFILE_RS64,
.platform = "rs64",
},
{ /* I-star */
.pvr_mask = 0xffff0000,
.pvr_value = 0x00360000,
.cpu_name = "RS64-III (icestar)",
.cpu_features = CPU_FTRS_RS64,
.cpu_user_features = COMMON_USER_PPC64,
.mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
.pmc_type = PPC_PMC_IBM,
.oprofile_cpu_type = "ppc64/rs64",
.oprofile_type = PPC_OPROFILE_RS64,
.platform = "rs64",
},
{ /* S-star */
.pvr_mask = 0xffff0000,
.pvr_value = 0x00370000,
.cpu_name = "RS64-IV (sstar)",
.cpu_features = CPU_FTRS_RS64,
.cpu_user_features = COMMON_USER_PPC64,
.mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
.pmc_type = PPC_PMC_IBM,
.oprofile_cpu_type = "ppc64/rs64",
.oprofile_type = PPC_OPROFILE_RS64,
.platform = "rs64",
},
{ /* Power4 */
.pvr_mask = 0xffff0000,
.pvr_value = 0x00350000,
@ -617,7 +527,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
#endif /* CONFIG_PPC_BOOK3S_64 */
#ifdef CONFIG_PPC32
#if CLASSIC_PPC
#ifdef CONFIG_PPC_BOOK3S_32
{ /* 601 */
.pvr_mask = 0xffff0000,
.pvr_value = 0x00010000,
@ -1257,7 +1167,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.machine_check = machine_check_generic,
.platform = "ppc603",
},
#endif /* CLASSIC_PPC */
#endif /* CONFIG_PPC_BOOK3S_32 */
#ifdef CONFIG_8xx
{ /* 8xx */
.pvr_mask = 0xffff0000,

366
arch/powerpc/kernel/eeh.c
View File

@ -27,6 +27,7 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/pci.h>
#include <linux/iommu.h>
#include <linux/proc_fs.h>
#include <linux/rbtree.h>
#include <linux/reboot.h>
@ -40,6 +41,7 @@
#include <asm/eeh.h>
#include <asm/eeh_event.h>
#include <asm/io.h>
#include <asm/iommu.h>
#include <asm/machdep.h>
#include <asm/ppc-pci.h>
#include <asm/rtas.h>
@ -108,6 +110,9 @@ struct eeh_ops *eeh_ops = NULL;
/* Lock to avoid races due to multiple reports of an error */
DEFINE_RAW_SPINLOCK(confirm_error_lock);
/* Lock to protect passed flags */
static DEFINE_MUTEX(eeh_dev_mutex);
/* Buffer for reporting pci register dumps. Its here in BSS, and
* not dynamically alloced, so that it ends up in RMO where RTAS
* can access it.
@ -137,7 +142,7 @@ static struct eeh_stats eeh_stats;
static int __init eeh_setup(char *str)
{
if (!strcmp(str, "off"))
eeh_subsystem_flags |= EEH_FORCE_DISABLED;
eeh_add_flag(EEH_FORCE_DISABLED);
return 1;
}
@ -152,12 +157,13 @@ __setup("eeh=", eeh_setup);
* This routine captures assorted PCI configuration space data,
* and puts them into a buffer for RTAS error logging.
*/
static size_t eeh_gather_pci_data(struct eeh_dev *edev, char * buf, size_t len)
static size_t eeh_gather_pci_data(struct eeh_dev *edev, char *buf, size_t len)
{
struct device_node *dn = eeh_dev_to_of_node(edev);
u32 cfg;
int cap, i;
int n = 0;
int n = 0, l = 0;
char buffer[128];
n += scnprintf(buf+n, len-n, "%s\n", dn->full_name);
pr_warn("EEH: of node=%s\n", dn->full_name);
@ -202,8 +208,22 @@ static size_t eeh_gather_pci_data(struct eeh_dev *edev, char * buf, size_t len)
for (i=0; i<=8; i++) {
eeh_ops->read_config(dn, cap+4*i, 4, &cfg);
n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg);
pr_warn("EEH: PCI-E %02x: %08x\n", i, cfg);
if ((i % 4) == 0) {
if (i != 0)
pr_warn("%s\n", buffer);
l = scnprintf(buffer, sizeof(buffer),
"EEH: PCI-E %02x: %08x ",
4*i, cfg);
} else {
l += scnprintf(buffer+l, sizeof(buffer)-l,
"%08x ", cfg);
}
}
pr_warn("%s\n", buffer);
}
/* If AER capable, dump it */
@ -212,11 +232,24 @@ static size_t eeh_gather_pci_data(struct eeh_dev *edev, char * buf, size_t len)
n += scnprintf(buf+n, len-n, "pci-e AER:\n");
pr_warn("EEH: PCI-E AER capability register set follows:\n");
for (i=0; i<14; i++) {
for (i=0; i<=13; i++) {
eeh_ops->read_config(dn, cap+4*i, 4, &cfg);
n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg);
pr_warn("EEH: PCI-E AER %02x: %08x\n", i, cfg);
if ((i % 4) == 0) {
if (i != 0)
pr_warn("%s\n", buffer);
l = scnprintf(buffer, sizeof(buffer),
"EEH: PCI-E AER %02x: %08x ",
4*i, cfg);
} else {
l += scnprintf(buffer+l, sizeof(buffer)-l,
"%08x ", cfg);
}
}
pr_warn("%s\n", buffer);
}
return n;
@ -247,7 +280,7 @@ void eeh_slot_error_detail(struct eeh_pe *pe, int severity)
* 0xFF's is always returned from PCI config space.
*/
if (!(pe->type & EEH_PE_PHB)) {
if (eeh_probe_mode_devtree())
if (eeh_has_flag(EEH_ENABLE_IO_FOR_LOG))
eeh_pci_enable(pe, EEH_OPT_THAW_MMIO);
eeh_ops->configure_bridge(pe);
eeh_pe_restore_bars(pe);
@ -298,14 +331,14 @@ static int eeh_phb_check_failure(struct eeh_pe *pe)
unsigned long flags;
int ret;
if (!eeh_probe_mode_dev())
if (!eeh_has_flag(EEH_PROBE_MODE_DEV))
return -EPERM;
/* Find the PHB PE */
phb_pe = eeh_phb_pe_get(pe->phb);
if (!phb_pe) {
pr_warning("%s Can't find PE for PHB#%d\n",
__func__, pe->phb->global_number);
pr_warn("%s Can't find PE for PHB#%d\n",
__func__, pe->phb->global_number);
return -EEXIST;
}
@ -400,6 +433,14 @@ int eeh_dev_check_failure(struct eeh_dev *edev)
if (ret > 0)
return ret;
/*
* If the PE isn't owned by us, we shouldn't check the
* state. Instead, let the owner handle it if the PE has
* been frozen.
*/
if (eeh_pe_passed(pe))
return 0;
/* If we already have a pending isolation event for this
* slot, we know it's bad already, we don't need to check.
* Do this checking under a lock; as multiple PCI devices
@ -746,13 +787,13 @@ void eeh_save_bars(struct eeh_dev *edev)
int __init eeh_ops_register(struct eeh_ops *ops)
{
if (!ops->name) {
pr_warning("%s: Invalid EEH ops name for %p\n",
pr_warn("%s: Invalid EEH ops name for %p\n",
__func__, ops);
return -EINVAL;
}
if (eeh_ops && eeh_ops != ops) {
pr_warning("%s: EEH ops of platform %s already existing (%s)\n",
pr_warn("%s: EEH ops of platform %s already existing (%s)\n",
__func__, eeh_ops->name, ops->name);
return -EEXIST;
}
@ -772,7 +813,7 @@ int __init eeh_ops_register(struct eeh_ops *ops)
int __exit eeh_ops_unregister(const char *name)
{
if (!name || !strlen(name)) {
pr_warning("%s: Invalid EEH ops name\n",
pr_warn("%s: Invalid EEH ops name\n",
__func__);
return -EINVAL;
}
@ -788,7 +829,7 @@ int __exit eeh_ops_unregister(const char *name)
static int eeh_reboot_notifier(struct notifier_block *nb,
unsigned long action, void *unused)
{
eeh_set_enable(false);
eeh_clear_flag(EEH_ENABLED);
return NOTIFY_DONE;
}
@ -837,11 +878,11 @@ int eeh_init(void)
/* call platform initialization function */
if (!eeh_ops) {
pr_warning("%s: Platform EEH operation not found\n",
pr_warn("%s: Platform EEH operation not found\n",
__func__);
return -EEXIST;
} else if ((ret = eeh_ops->init())) {
pr_warning("%s: Failed to call platform init function (%d)\n",
pr_warn("%s: Failed to call platform init function (%d)\n",
__func__, ret);
return ret;
}
@ -852,13 +893,13 @@ int eeh_init(void)
return ret;
/* Enable EEH for all adapters */
if (eeh_probe_mode_devtree()) {
if (eeh_has_flag(EEH_PROBE_MODE_DEVTREE)) {
list_for_each_entry_safe(hose, tmp,
&hose_list, list_node) {
phb = hose->dn;
traverse_pci_devices(phb, eeh_ops->of_probe, NULL);
}
} else if (eeh_probe_mode_dev()) {
} else if (eeh_has_flag(EEH_PROBE_MODE_DEV)) {
list_for_each_entry_safe(hose, tmp,
&hose_list, list_node)
pci_walk_bus(hose->bus, eeh_ops->dev_probe, NULL);
@ -882,7 +923,7 @@ int eeh_init(void)
if (eeh_enabled())
pr_info("EEH: PCI Enhanced I/O Error Handling Enabled\n");
else
pr_warning("EEH: No capable adapters found\n");
pr_warn("EEH: No capable adapters found\n");
return ret;
}
@ -910,7 +951,7 @@ void eeh_add_device_early(struct device_node *dn)
* would delay the probe until late stage because
* the PCI device isn't available this moment.
*/
if (!eeh_probe_mode_devtree())
if (!eeh_has_flag(EEH_PROBE_MODE_DEVTREE))
return;
if (!of_node_to_eeh_dev(dn))
@ -996,7 +1037,7 @@ void eeh_add_device_late(struct pci_dev *dev)
* We have to do the EEH probe here because the PCI device
* hasn't been created yet in the early stage.
*/
if (eeh_probe_mode_dev())
if (eeh_has_flag(EEH_PROBE_MODE_DEV))
eeh_ops->dev_probe(dev, NULL);
eeh_addr_cache_insert_dev(dev);
@ -1100,6 +1141,285 @@ void eeh_remove_device(struct pci_dev *dev)
edev->mode &= ~EEH_DEV_SYSFS;
}
/**
* eeh_dev_open - Increase count of pass through devices for PE
* @pdev: PCI device
*
* Increase count of passed through devices for the indicated
* PE. In the result, the EEH errors detected on the PE won't be
* reported. The PE owner will be responsible for detection
* and recovery.
*/
int eeh_dev_open(struct pci_dev *pdev)
{
struct eeh_dev *edev;
mutex_lock(&eeh_dev_mutex);
/* No PCI device ? */
if (!pdev)
goto out;
/* No EEH device or PE ? */
edev = pci_dev_to_eeh_dev(pdev);
if (!edev || !edev->pe)
goto out;
/* Increase PE's pass through count */
atomic_inc(&edev->pe->pass_dev_cnt);
mutex_unlock(&eeh_dev_mutex);
return 0;
out:
mutex_unlock(&eeh_dev_mutex);
return -ENODEV;
}
EXPORT_SYMBOL_GPL(eeh_dev_open);
/**
* eeh_dev_release - Decrease count of pass through devices for PE
* @pdev: PCI device
*
* Decrease count of pass through devices for the indicated PE. If
* there is no passed through device in PE, the EEH errors detected
* on the PE will be reported and handled as usual.
*/
void eeh_dev_release(struct pci_dev *pdev)
{
struct eeh_dev *edev;
mutex_lock(&eeh_dev_mutex);
/* No PCI device ? */
if (!pdev)
goto out;
/* No EEH device ? */
edev = pci_dev_to_eeh_dev(pdev);
if (!edev || !edev->pe || !eeh_pe_passed(edev->pe))
goto out;
/* Decrease PE's pass through count */
atomic_dec(&edev->pe->pass_dev_cnt);
WARN_ON(atomic_read(&edev->pe->pass_dev_cnt) < 0);
out:
mutex_unlock(&eeh_dev_mutex);
}
EXPORT_SYMBOL(eeh_dev_release);
#ifdef CONFIG_IOMMU_API
static int dev_has_iommu_table(struct device *dev, void *data)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct pci_dev **ppdev = data;
struct iommu_table *tbl;
if (!dev)
return 0;
tbl = get_iommu_table_base(dev);
if (tbl && tbl->it_group) {
*ppdev = pdev;
return 1;
}
return 0;
}
/**
* eeh_iommu_group_to_pe - Convert IOMMU group to EEH PE
* @group: IOMMU group
*
* The routine is called to convert IOMMU group to EEH PE.
*/
struct eeh_pe *eeh_iommu_group_to_pe(struct iommu_group *group)
{
struct pci_dev *pdev = NULL;
struct eeh_dev *edev;
int ret;
/* No IOMMU group ? */
if (!group)
return NULL;
ret = iommu_group_for_each_dev(group, &pdev, dev_has_iommu_table);
if (!ret || !pdev)
return NULL;
/* No EEH device or PE ? */
edev = pci_dev_to_eeh_dev(pdev);
if (!edev || !edev->pe)
return NULL;
return edev->pe;
}
EXPORT_SYMBOL_GPL(eeh_iommu_group_to_pe);
#endif /* CONFIG_IOMMU_API */
/**
* eeh_pe_set_option - Set options for the indicated PE
* @pe: EEH PE
* @option: requested option
*
* The routine is called to enable or disable EEH functionality
* on the indicated PE, to enable IO or DMA for the frozen PE.
*/
int eeh_pe_set_option(struct eeh_pe *pe, int option)
{
int ret = 0;
/* Invalid PE ? */
if (!pe)
return -ENODEV;
/*
* EEH functionality could possibly be disabled, just
* return error for the case. And the EEH functinality
* isn't expected to be disabled on one specific PE.
*/
switch (option) {
case EEH_OPT_ENABLE:
if (eeh_enabled())
break;
ret = -EIO;
break;
case EEH_OPT_DISABLE:
break;
case EEH_OPT_THAW_MMIO:
case EEH_OPT_THAW_DMA:
if (!eeh_ops || !eeh_ops->set_option) {
ret = -ENOENT;
break;
}
ret = eeh_ops->set_option(pe, option);
break;
default:
pr_debug("%s: Option %d out of range (%d, %d)\n",
__func__, option, EEH_OPT_DISABLE, EEH_OPT_THAW_DMA);
ret = -EINVAL;
}
return ret;
}
EXPORT_SYMBOL_GPL(eeh_pe_set_option);
/**
* eeh_pe_get_state - Retrieve PE's state
* @pe: EEH PE
*
* Retrieve the PE's state, which includes 3 aspects: enabled
* DMA, enabled IO and asserted reset.
*/
int eeh_pe_get_state(struct eeh_pe *pe)
{
int result, ret = 0;
bool rst_active, dma_en, mmio_en;
/* Existing PE ? */
if (!pe)
return -ENODEV;
if (!eeh_ops || !eeh_ops->get_state)
return -ENOENT;
result = eeh_ops->get_state(pe, NULL);
rst_active = !!(result & EEH_STATE_RESET_ACTIVE);
dma_en = !!(result & EEH_STATE_DMA_ENABLED);
mmio_en = !!(result & EEH_STATE_MMIO_ENABLED);
if (rst_active)
ret = EEH_PE_STATE_RESET;
else if (dma_en && mmio_en)
ret = EEH_PE_STATE_NORMAL;
else if (!dma_en && !mmio_en)
ret = EEH_PE_STATE_STOPPED_IO_DMA;
else if (!dma_en && mmio_en)
ret = EEH_PE_STATE_STOPPED_DMA;
else
ret = EEH_PE_STATE_UNAVAIL;
return ret;
}
EXPORT_SYMBOL_GPL(eeh_pe_get_state);
/**
* eeh_pe_reset - Issue PE reset according to specified type
* @pe: EEH PE
* @option: reset type
*
* The routine is called to reset the specified PE with the
* indicated type, either fundamental reset or hot reset.
* PE reset is the most important part for error recovery.
*/
int eeh_pe_reset(struct eeh_pe *pe, int option)
{
int ret = 0;
/* Invalid PE ? */
if (!pe)
return -ENODEV;
if (!eeh_ops || !eeh_ops->set_option || !eeh_ops->reset)
return -ENOENT;
switch (option) {
case EEH_RESET_DEACTIVATE:
ret = eeh_ops->reset(pe, option);
if (ret)
break;
/*
* The PE is still in frozen state and we need to clear
* that. It's good to clear frozen state after deassert
* to avoid messy IO access during reset, which might
* cause recursive frozen PE.
*/
ret = eeh_ops->set_option(pe, EEH_OPT_THAW_MMIO);
if (!ret)
ret = eeh_ops->set_option(pe, EEH_OPT_THAW_DMA);
if (!ret)
eeh_pe_state_clear(pe, EEH_PE_ISOLATED);
break;
case EEH_RESET_HOT:
case EEH_RESET_FUNDAMENTAL:
ret = eeh_ops->reset(pe, option);
break;
default:
pr_debug("%s: Unsupported option %d\n",
__func__, option);
ret = -EINVAL;
}
return ret;
}
EXPORT_SYMBOL_GPL(eeh_pe_reset);
/**
* eeh_pe_configure - Configure PCI bridges after PE reset
* @pe: EEH PE
*
* The routine is called to restore the PCI config space for
* those PCI devices, especially PCI bridges affected by PE
* reset issued previously.
*/
int eeh_pe_configure(struct eeh_pe *pe)
{
int ret = 0;
/* Invalid PE ? */
if (!pe)
return -ENODEV;
/* Restore config space for the affected devices */
eeh_pe_restore_bars(pe);
return ret;
}
EXPORT_SYMBOL_GPL(eeh_pe_configure);
static int proc_eeh_show(struct seq_file *m, void *v)
{
if (!eeh_enabled()) {
@ -1143,9 +1463,9 @@ static const struct file_operations proc_eeh_operations = {
static int eeh_enable_dbgfs_set(void *data, u64 val)
{
if (val)
eeh_subsystem_flags &= ~EEH_FORCE_DISABLED;
eeh_clear_flag(EEH_FORCE_DISABLED);
else
eeh_subsystem_flags |= EEH_FORCE_DISABLED;
eeh_add_flag(EEH_FORCE_DISABLED);
/* Notify the backend */
if (eeh_ops->post_init)

9
arch/powerpc/kernel/eeh_cache.c
View File

@ -143,7 +143,7 @@ eeh_addr_cache_insert(struct pci_dev *dev, unsigned long alo,
} else {
if (dev != piar->pcidev ||
alo != piar->addr_lo || ahi != piar->addr_hi) {
pr_warning("PIAR: overlapping address range\n");
pr_warn("PIAR: overlapping address range\n");
}
return piar;
}
@ -177,19 +177,20 @@ static void __eeh_addr_cache_insert_dev(struct pci_dev *dev)
dn = pci_device_to_OF_node(dev);
if (!dn) {
pr_warning("PCI: no pci dn found for dev=%s\n", pci_name(dev));
pr_warn("PCI: no pci dn found for dev=%s\n",
pci_name(dev));
return;
}
edev = of_node_to_eeh_dev(dn);
if (!edev) {
pr_warning("PCI: no EEH dev found for dn=%s\n",
pr_warn("PCI: no EEH dev found for dn=%s\n",
dn->full_name);
return;
}
/* Skip any devices for which EEH is not enabled. */
if (!eeh_probe_mode_dev() && !edev->pe) {
if (!edev->pe) {
#ifdef DEBUG
pr_info("PCI: skip building address cache for=%s - %s\n",
pci_name(dev), dn->full_name);

3
arch/powerpc/kernel/eeh_dev.c
View File

@ -57,7 +57,8 @@ void *eeh_dev_init(struct device_node *dn, void *data)
/* Allocate EEH device */
edev = kzalloc(sizeof(*edev), GFP_KERNEL);
if (!edev) {
pr_warning("%s: out of memory\n", __func__);
pr_warn("%s: out of memory\n",
__func__);
return NULL;
}

16
arch/powerpc/kernel/eeh_driver.c
View File

@ -599,7 +599,7 @@ static void eeh_handle_normal_event(struct eeh_pe *pe)
pe->freeze_count++;
if (pe->freeze_count > EEH_MAX_ALLOWED_FREEZES)
goto excess_failures;
pr_warning("EEH: This PCI device has failed %d times in the last hour\n",
pr_warn("EEH: This PCI device has failed %d times in the last hour\n",
pe->freeze_count);
/* Walk the various device drivers attached to this slot through
@ -616,7 +616,7 @@ static void eeh_handle_normal_event(struct eeh_pe *pe)
*/
rc = eeh_ops->wait_state(pe, MAX_WAIT_FOR_RECOVERY*1000);
if (rc < 0 || rc == EEH_STATE_NOT_SUPPORT) {
pr_warning("EEH: Permanent failure\n");
pr_warn("EEH: Permanent failure\n");
goto hard_fail;
}
@ -635,8 +635,8 @@ static void eeh_handle_normal_event(struct eeh_pe *pe)
pr_info("EEH: Reset with hotplug activity\n");
rc = eeh_reset_device(pe, frozen_bus);
if (rc) {
pr_warning("%s: Unable to reset, err=%d\n",
__func__, rc);
pr_warn("%s: Unable to reset, err=%d\n",
__func__, rc);
goto hard_fail;
}
}
@ -678,7 +678,7 @@ static void eeh_handle_normal_event(struct eeh_pe *pe)
/* If any device has a hard failure, then shut off everything. */
if (result == PCI_ERS_RESULT_DISCONNECT) {
pr_warning("EEH: Device driver gave up\n");
pr_warn("EEH: Device driver gave up\n");
goto hard_fail;
}
@ -687,8 +687,8 @@ static void eeh_handle_normal_event(struct eeh_pe *pe)
pr_info("EEH: Reset without hotplug activity\n");
rc = eeh_reset_device(pe, NULL);
if (rc) {
pr_warning("%s: Cannot reset, err=%d\n",
__func__, rc);
pr_warn("%s: Cannot reset, err=%d\n",
__func__, rc);
goto hard_fail;
}
@ -701,7 +701,7 @@ static void eeh_handle_normal_event(struct eeh_pe *pe)
/* All devices should claim they have recovered by now. */
if ((result != PCI_ERS_RESULT_RECOVERED) &&
(result != PCI_ERS_RESULT_NONE)) {
pr_warning("EEH: Not recovered\n");
pr_warn("EEH: Not recovered\n");
goto hard_fail;
}

86
arch/powerpc/kernel/eeh_pe.c
View File

@ -32,8 +32,23 @@
#include <asm/pci-bridge.h>
#include <asm/ppc-pci.h>
static int eeh_pe_aux_size = 0;
static LIST_HEAD(eeh_phb_pe);
/**
* eeh_set_pe_aux_size - Set PE auxillary data size
* @size: PE auxillary data size
*
* Set PE auxillary data size
*/
void eeh_set_pe_aux_size(int size)
{
if (size < 0)
return;
eeh_pe_aux_size = size;
}
/**
* eeh_pe_alloc - Allocate PE
* @phb: PCI controller
@ -44,9 +59,16 @@ static LIST_HEAD(eeh_phb_pe);
static struct eeh_pe *eeh_pe_alloc(struct pci_controller *phb, int type)
{
struct eeh_pe *pe;
size_t alloc_size;
alloc_size = sizeof(struct eeh_pe);
if (eeh_pe_aux_size) {
alloc_size = ALIGN(alloc_size, cache_line_size());
alloc_size += eeh_pe_aux_size;
}
/* Allocate PHB PE */
pe = kzalloc(sizeof(struct eeh_pe), GFP_KERNEL);
pe = kzalloc(alloc_size, GFP_KERNEL);
if (!pe) return NULL;
/* Initialize PHB PE */
@ -56,6 +78,8 @@ static struct eeh_pe *eeh_pe_alloc(struct pci_controller *phb, int type)
INIT_LIST_HEAD(&pe->child);
INIT_LIST_HEAD(&pe->edevs);
pe->data = (void *)pe + ALIGN(sizeof(struct eeh_pe),
cache_line_size());
return pe;
}
@ -179,7 +203,8 @@ void *eeh_pe_dev_traverse(struct eeh_pe *root,
void *ret;
if (!root) {
pr_warning("%s: Invalid PE %p\n", __func__, root);
pr_warn("%s: Invalid PE %p\n",
__func__, root);
return NULL;
}
@ -350,17 +375,6 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
pe->addr = edev->pe_config_addr;
pe->config_addr = edev->config_addr;
/*
* While doing PE reset, we probably hot-reset the
* upstream bridge. However, the PCI devices including
* the associated EEH devices might be removed when EEH
* core is doing recovery. So that won't safe to retrieve
* the bridge through downstream EEH device. We have to
* trace the parent PCI bus, then the upstream bridge.
*/
if (eeh_probe_mode_dev())
pe->bus = eeh_dev_to_pci_dev(edev)->bus;
/*
* Put the new EEH PE into hierarchy tree. If the parent
* can't be found, the newly created PE will be attached
@ -802,53 +816,33 @@ void eeh_pe_restore_bars(struct eeh_pe *pe)
*/
const char *eeh_pe_loc_get(struct eeh_pe *pe)
{
struct pci_controller *hose;
struct pci_bus *bus = eeh_pe_bus_get(pe);
struct pci_dev *pdev;
struct device_node *dn;
const char *loc;
struct device_node *dn = pci_bus_to_OF_node(bus);
const char *loc = NULL;
if (!bus)
return "N/A";
if (!dn)
goto out;
/* PHB PE or root PE ? */
if (pci_is_root_bus(bus)) {
hose = pci_bus_to_host(bus);
loc = of_get_property(hose->dn,
"ibm,loc-code", NULL);
loc = of_get_property(dn, "ibm,loc-code", NULL);
if (!loc)
loc = of_get_property(dn, "ibm,io-base-loc-code", NULL);
if (loc)
return loc;
loc = of_get_property(hose->dn,
"ibm,io-base-loc-code", NULL);
if (loc)
return loc;
goto out;
pdev = pci_get_slot(bus, 0x0);
} else {
pdev = bus->self;
}
if (!pdev) {
loc = "N/A";
goto out;
}
dn = pci_device_to_OF_node(pdev);
if (!dn) {
loc = "N/A";
goto out;
/* Check the root port */
dn = dn->child;
if (!dn)
goto out;
}
loc = of_get_property(dn, "ibm,loc-code", NULL);
if (!loc)
loc = of_get_property(dn, "ibm,slot-location-code", NULL);
if (!loc)
loc = "N/A";
out:
if (pci_is_root_bus(bus) && pdev)
pci_dev_put(pdev);
return loc;
return loc ? loc : "N/A";
}
/**

13
arch/powerpc/kernel/entry_64.S
View File

@ -482,16 +482,12 @@ END_FTR_SECTION_IFSET(CPU_FTR_STCX_CHECKS_ADDRESS)
ld r8,KSP(r4) /* new stack pointer */
#ifdef CONFIG_PPC_BOOK3S
BEGIN_FTR_SECTION
BEGIN_FTR_SECTION_NESTED(95)
clrrdi r6,r8,28 /* get its ESID */
clrrdi r9,r1,28 /* get current sp ESID */
FTR_SECTION_ELSE_NESTED(95)
FTR_SECTION_ELSE
clrrdi r6,r8,40 /* get its 1T ESID */
clrrdi r9,r1,40 /* get current sp 1T ESID */
ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_1T_SEGMENT, 95)
FTR_SECTION_ELSE
b 2f
ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_SLB)
ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_1T_SEGMENT)
clrldi. r0,r6,2 /* is new ESID c00000000? */
cmpd cr1,r6,r9 /* or is new ESID the same as current ESID? */
cror eq,4*cr1+eq,eq
@ -919,6 +915,11 @@ restore_check_irq_replay:
addi r3,r1,STACK_FRAME_OVERHEAD;
bl do_IRQ
b ret_from_except
1: cmpwi cr0,r3,0xe60
bne 1f
addi r3,r1,STACK_FRAME_OVERHEAD;
bl handle_hmi_exception
b ret_from_except
1: cmpwi cr0,r3,0x900
bne 1f
addi r3,r1,STACK_FRAME_OVERHEAD;

361
arch/powerpc/kernel/exceptions-64s.S
View File

@ -188,10 +188,6 @@ ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE)
data_access_pSeries:
HMT_MEDIUM_PPR_DISCARD
SET_SCRATCH0(r13)
BEGIN_FTR_SECTION
b data_access_check_stab
data_access_not_stab:
END_MMU_FTR_SECTION_IFCLR(MMU_FTR_SLB)
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common, EXC_STD,
KVMTEST, 0x300)
@ -339,7 +335,7 @@ emulation_assist_trampoline:
hv_exception_trampoline:
SET_SCRATCH0(r13)
EXCEPTION_PROLOG_0(PACA_EXGEN)
b hmi_exception_hv
b hmi_exception_early
. = 0xe80
hv_doorbell_trampoline:
@ -514,34 +510,6 @@ machine_check_pSeries_0:
EXCEPTION_PROLOG_1(PACA_EXMC, KVMTEST, 0x200)
EXCEPTION_PROLOG_PSERIES_1(machine_check_common, EXC_STD)
KVM_HANDLER_SKIP(PACA_EXMC, EXC_STD, 0x200)
/* moved from 0x300 */
data_access_check_stab:
GET_PACA(r13)
std r9,PACA_EXSLB+EX_R9(r13)
std r10,PACA_EXSLB+EX_R10(r13)
mfspr r10,SPRN_DAR
mfspr r9,SPRN_DSISR
srdi r10,r10,60
rlwimi r10,r9,16,0x20
#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
lbz r9,HSTATE_IN_GUEST(r13)
rlwimi r10,r9,8,0x300
#endif
mfcr r9
cmpwi r10,0x2c
beq do_stab_bolted_pSeries
mtcrf 0x80,r9
ld r9,PACA_EXSLB+EX_R9(r13)
ld r10,PACA_EXSLB+EX_R10(r13)
b data_access_not_stab
do_stab_bolted_pSeries:
std r11,PACA_EXSLB+EX_R11(r13)
std r12,PACA_EXSLB+EX_R12(r13)
GET_SCRATCH0(r10)
std r10,PACA_EXSLB+EX_R13(r13)
EXCEPTION_PROLOG_PSERIES_1(do_stab_bolted, EXC_STD)
KVM_HANDLER_SKIP(PACA_EXGEN, EXC_STD, 0x300)
KVM_HANDLER_SKIP(PACA_EXSLB, EXC_STD, 0x380)
KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0x400)
@ -621,8 +589,64 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe22)
STD_EXCEPTION_HV_OOL(0xe42, emulation_assist)
KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe42)
STD_EXCEPTION_HV_OOL(0xe62, hmi_exception) /* need to flush cache ? */
MASKABLE_EXCEPTION_HV_OOL(0xe62, hmi_exception)
KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe62)
.globl hmi_exception_early
hmi_exception_early:
EXCEPTION_PROLOG_1(PACA_EXGEN, NOTEST, 0xe60)
mr r10,r1 /* Save r1 */
ld r1,PACAEMERGSP(r13) /* Use emergency stack */
subi r1,r1,INT_FRAME_SIZE /* alloc stack frame */
std r9,_CCR(r1) /* save CR in stackframe */
mfspr r11,SPRN_HSRR0 /* Save HSRR0 */
std r11,_NIP(r1) /* save HSRR0 in stackframe */
mfspr r12,SPRN_HSRR1 /* Save SRR1 */
std r12,_MSR(r1) /* save SRR1 in stackframe */
std r10,0(r1) /* make stack chain pointer */
std r0,GPR0(r1) /* save r0 in stackframe */
std r10,GPR1(r1) /* save r1 in stackframe */
EXCEPTION_PROLOG_COMMON_2(PACA_EXGEN)
EXCEPTION_PROLOG_COMMON_3(0xe60)
addi r3,r1,STACK_FRAME_OVERHEAD
bl hmi_exception_realmode
/* Windup the stack. */
/* Clear MSR_RI before setting SRR0 and SRR1. */
li r0,MSR_RI
mfmsr r9 /* get MSR value */
andc r9,r9,r0
mtmsrd r9,1 /* Clear MSR_RI */
/* Move original HSRR0 and HSRR1 into the respective regs */
ld r9,_MSR(r1)
mtspr SPRN_HSRR1,r9
ld r3,_NIP(r1)
mtspr SPRN_HSRR0,r3
ld r9,_CTR(r1)
mtctr r9
ld r9,_XER(r1)
mtxer r9
ld r9,_LINK(r1)
mtlr r9
REST_GPR(0, r1)
REST_8GPRS(2, r1)
REST_GPR(10, r1)
ld r11,_CCR(r1)
mtcr r11
REST_GPR(11, r1)
REST_2GPRS(12, r1)
/* restore original r1. */
ld r1,GPR1(r1)
/*
* Go to virtual mode and pull the HMI event information from
* firmware.
*/
.globl hmi_exception_after_realmode
hmi_exception_after_realmode:
SET_SCRATCH0(r13)
EXCEPTION_PROLOG_0(PACA_EXGEN)
b hmi_exception_hv
MASKABLE_EXCEPTION_HV_OOL(0xe82, h_doorbell)
KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe82)
@ -643,6 +667,8 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
* - If it was a decrementer interrupt, we bump the dec to max and and return.
* - If it was a doorbell we return immediately since doorbells are edge
* triggered and won't automatically refire.
* - If it was a HMI we return immediately since we handled it in realmode
* and it won't refire.
* - else we hard disable and return.
* This is called with r10 containing the value to OR to the paca field.
*/
@ -659,6 +685,8 @@ masked_##_H##interrupt: \
mtspr SPRN_DEC,r10; \
b 2f; \
1: cmpwi r10,PACA_IRQ_DBELL; \
beq 2f; \
cmpwi r10,PACA_IRQ_HMI; \
beq 2f; \
mfspr r10,SPRN_##_H##SRR1; \
rldicl r10,r10,48,1; /* clear MSR_EE */ \
@ -799,7 +827,7 @@ kvmppc_skip_Hinterrupt:
STD_EXCEPTION_COMMON(0xd00, single_step, single_step_exception)
STD_EXCEPTION_COMMON(0xe00, trap_0e, unknown_exception)
STD_EXCEPTION_COMMON(0xe40, emulation_assist, emulation_assist_interrupt)
STD_EXCEPTION_COMMON(0xe60, hmi_exception, unknown_exception)
STD_EXCEPTION_COMMON_ASYNC(0xe60, hmi_exception, handle_hmi_exception)
#ifdef CONFIG_PPC_DOORBELL
STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, doorbell_exception)
#else
@ -984,66 +1012,6 @@ system_call_entry:
ppc64_runlatch_on_trampoline:
b __ppc64_runlatch_on
/*
* Here we have detected that the kernel stack pointer is bad.
* R9 contains the saved CR, r13 points to the paca,
* r10 contains the (bad) kernel stack pointer,
* r11 and r12 contain the saved SRR0 and SRR1.
* We switch to using an emergency stack, save the registers there,
* and call kernel_bad_stack(), which panics.
*/
bad_stack:
ld r1,PACAEMERGSP(r13)
subi r1,r1,64+INT_FRAME_SIZE
std r9,_CCR(r1)
std r10,GPR1(r1)
std r11,_NIP(r1)
std r12,_MSR(r1)
mfspr r11,SPRN_DAR
mfspr r12,SPRN_DSISR
std r11,_DAR(r1)
std r12,_DSISR(r1)
mflr r10
mfctr r11
mfxer r12
std r10,_LINK(r1)
std r11,_CTR(r1)
std r12,_XER(r1)
SAVE_GPR(0,r1)
SAVE_GPR(2,r1)
ld r10,EX_R3(r3)
std r10,GPR3(r1)
SAVE_GPR(4,r1)
SAVE_4GPRS(5,r1)
ld r9,EX_R9(r3)
ld r10,EX_R10(r3)
SAVE_2GPRS(9,r1)
ld r9,EX_R11(r3)
ld r10,EX_R12(r3)
ld r11,EX_R13(r3)
std r9,GPR11(r1)
std r10,GPR12(r1)
std r11,GPR13(r1)
BEGIN_FTR_SECTION
ld r10,EX_CFAR(r3)
std r10,ORIG_GPR3(r1)
END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
SAVE_8GPRS(14,r1)
SAVE_10GPRS(22,r1)
lhz r12,PACA_TRAP_SAVE(r13)
std r12,_TRAP(r1)
addi r11,r1,INT_FRAME_SIZE
std r11,0(r1)
li r12,0
std r12,0(r11)
ld r2,PACATOC(r13)
ld r11,exception_marker@toc(r2)
std r12,RESULT(r1)
std r11,STACK_FRAME_OVERHEAD-16(r1)
1: addi r3,r1,STACK_FRAME_OVERHEAD
bl kernel_bad_stack
b 1b
/*
* Here r13 points to the paca, r9 contains the saved CR,
* SRR0 and SRR1 are saved in r11 and r12,
@ -1057,7 +1025,7 @@ data_access_common:
mfspr r10,SPRN_DSISR
stw r10,PACA_EXGEN+EX_DSISR(r13)
EXCEPTION_PROLOG_COMMON(0x300, PACA_EXGEN)
DISABLE_INTS
RECONCILE_IRQ_STATE(r10, r11)
ld r12,_MSR(r1)
ld r3,PACA_EXGEN+EX_DAR(r13)
lwz r4,PACA_EXGEN+EX_DSISR(r13)
@ -1073,7 +1041,7 @@ h_data_storage_common:
stw r10,PACA_EXGEN+EX_DSISR(r13)
EXCEPTION_PROLOG_COMMON(0xe00, PACA_EXGEN)
bl save_nvgprs
DISABLE_INTS
RECONCILE_IRQ_STATE(r10, r11)
addi r3,r1,STACK_FRAME_OVERHEAD
bl unknown_exception
b ret_from_except
@ -1082,7 +1050,7 @@ h_data_storage_common:
.globl instruction_access_common
instruction_access_common:
EXCEPTION_PROLOG_COMMON(0x400, PACA_EXGEN)
DISABLE_INTS
RECONCILE_IRQ_STATE(r10, r11)
ld r12,_MSR(r1)
ld r3,_NIP(r1)
andis. r4,r12,0x5820
@ -1146,7 +1114,7 @@ slb_miss_fault:
unrecov_user_slb:
EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN)
DISABLE_INTS
RECONCILE_IRQ_STATE(r10, r11)
bl save_nvgprs
1: addi r3,r1,STACK_FRAME_OVERHEAD
bl unrecoverable_exception
@ -1169,7 +1137,7 @@ machine_check_common:
stw r10,PACA_EXGEN+EX_DSISR(r13)
EXCEPTION_PROLOG_COMMON(0x200, PACA_EXMC)
FINISH_NAP
DISABLE_INTS
RECONCILE_IRQ_STATE(r10, r11)
ld r3,PACA_EXGEN+EX_DAR(r13)
lwz r4,PACA_EXGEN+EX_DSISR(r13)
std r3,_DAR(r1)
@ -1192,7 +1160,7 @@ alignment_common:
std r3,_DAR(r1)
std r4,_DSISR(r1)
bl save_nvgprs
DISABLE_INTS
RECONCILE_IRQ_STATE(r10, r11)
addi r3,r1,STACK_FRAME_OVERHEAD
bl alignment_exception
b ret_from_except
@ -1202,7 +1170,7 @@ alignment_common:
program_check_common:
EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN)
bl save_nvgprs
DISABLE_INTS
RECONCILE_IRQ_STATE(r10, r11)
addi r3,r1,STACK_FRAME_OVERHEAD
bl program_check_exception
b ret_from_except
@ -1213,7 +1181,7 @@ fp_unavailable_common:
EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN)
bne 1f /* if from user, just load it up */
bl save_nvgprs
DISABLE_INTS
RECONCILE_IRQ_STATE(r10, r11)
addi r3,r1,STACK_FRAME_OVERHEAD
bl kernel_fp_unavailable_exception
BUG_OPCODE
@ -1232,7 +1200,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_TM)
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
2: /* User process was in a transaction */
bl save_nvgprs
DISABLE_INTS
RECONCILE_IRQ_STATE(r10, r11)
addi r3,r1,STACK_FRAME_OVERHEAD
bl fp_unavailable_tm
b ret_from_except
@ -1258,7 +1226,7 @@ BEGIN_FTR_SECTION
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
2: /* User process was in a transaction */
bl save_nvgprs
DISABLE_INTS
RECONCILE_IRQ_STATE(r10, r11)
addi r3,r1,STACK_FRAME_OVERHEAD
bl altivec_unavailable_tm
b ret_from_except
@ -1267,7 +1235,7 @@ BEGIN_FTR_SECTION
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
#endif
bl save_nvgprs
DISABLE_INTS
RECONCILE_IRQ_STATE(r10, r11)
addi r3,r1,STACK_FRAME_OVERHEAD
bl altivec_unavailable_exception
b ret_from_except
@ -1292,7 +1260,7 @@ BEGIN_FTR_SECTION
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
2: /* User process was in a transaction */
bl save_nvgprs
DISABLE_INTS
RECONCILE_IRQ_STATE(r10, r11)
addi r3,r1,STACK_FRAME_OVERHEAD
bl vsx_unavailable_tm
b ret_from_except
@ -1301,7 +1269,7 @@ BEGIN_FTR_SECTION
END_FTR_SECTION_IFSET(CPU_FTR_VSX)
#endif
bl save_nvgprs
DISABLE_INTS
RECONCILE_IRQ_STATE(r10, r11)
addi r3,r1,STACK_FRAME_OVERHEAD
bl vsx_unavailable_exception
b ret_from_except
@ -1338,12 +1306,6 @@ fwnmi_data_area:
. = 0x8000
#endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */
/* Space for CPU0's segment table */
.balign 4096
.globl initial_stab
initial_stab:
.space 4096
#ifdef CONFIG_PPC_POWERNV
_GLOBAL(opal_mc_secondary_handler)
HMT_MEDIUM_PPR_DISCARD
@ -1566,7 +1528,7 @@ slb_miss_realmode:
unrecov_slb:
EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
DISABLE_INTS
RECONCILE_IRQ_STATE(r10, r11)
bl save_nvgprs
1: addi r3,r1,STACK_FRAME_OVERHEAD
bl unrecoverable_exception
@ -1594,12 +1556,6 @@ do_hash_page:
bne- handle_page_fault /* if not, try to insert a HPTE */
andis. r0,r4,DSISR_DABRMATCH@h
bne- handle_dabr_fault
BEGIN_FTR_SECTION
andis. r0,r4,0x0020 /* Is it a segment table fault? */
bne- do_ste_alloc /* If so handle it */
END_MMU_FTR_SECTION_IFCLR(MMU_FTR_SLB)
CURRENT_THREAD_INFO(r11, r1)
lwz r0,TI_PREEMPT(r11) /* If we're in an "NMI" */
andis. r0,r0,NMI_MASK@h /* (i.e. an irq when soft-disabled) */
@ -1681,113 +1637,62 @@ handle_dabr_fault:
bl bad_page_fault
b ret_from_except
/* here we have a segment miss */
do_ste_alloc:
bl ste_allocate /* try to insert stab entry */
cmpdi r3,0
bne- handle_page_fault
b fast_exception_return
/*
* r13 points to the PACA, r9 contains the saved CR,
* Here we have detected that the kernel stack pointer is bad.
* R9 contains the saved CR, r13 points to the paca,
* r10 contains the (bad) kernel stack pointer,
* r11 and r12 contain the saved SRR0 and SRR1.
* r9 - r13 are saved in paca->exslb.
* We assume we aren't going to take any exceptions during this procedure.
* We assume (DAR >> 60) == 0xc.
* We switch to using an emergency stack, save the registers there,
* and call kernel_bad_stack(), which panics.
*/
.align 7
do_stab_bolted:
stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
std r11,PACA_EXSLB+EX_SRR0(r13) /* save SRR0 in exc. frame */
mfspr r11,SPRN_DAR /* ea */
/*
* check for bad kernel/user address
* (ea & ~REGION_MASK) >= PGTABLE_RANGE
*/
rldicr. r9,r11,4,(63 - 46 - 4)
li r9,0 /* VSID = 0 for bad address */
bne- 0f
/*
* Calculate VSID:
* This is the kernel vsid, we take the top for context from
* the range. context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1
* Here we know that (ea >> 60) == 0xc
*/
lis r9,(MAX_USER_CONTEXT + 1)@ha
addi r9,r9,(MAX_USER_CONTEXT + 1)@l
srdi r10,r11,SID_SHIFT
rldimi r10,r9,ESID_BITS,0 /* proto vsid */
ASM_VSID_SCRAMBLE(r10, r9, 256M)
rldic r9,r10,12,16 /* r9 = vsid << 12 */
0:
/* Hash to the primary group */
ld r10,PACASTABVIRT(r13)
srdi r11,r11,SID_SHIFT
rldimi r10,r11,7,52 /* r10 = first ste of the group */
/* Search the primary group for a free entry */
1: ld r11,0(r10) /* Test valid bit of the current ste */
andi. r11,r11,0x80
beq 2f
addi r10,r10,16
andi. r11,r10,0x70
bne 1b
/* Stick for only searching the primary group for now. */
/* At least for now, we use a very simple random castout scheme */
/* Use the TB as a random number ; OR in 1 to avoid entry 0 */
mftb r11
rldic r11,r11,4,57 /* r11 = (r11 << 4) & 0x70 */
ori r11,r11,0x10
/* r10 currently points to an ste one past the group of interest */
/* make it point to the randomly selected entry */
subi r10,r10,128
or r10,r10,r11 /* r10 is the entry to invalidate */
isync /* mark the entry invalid */
ld r11,0(r10)
rldicl r11,r11,56,1 /* clear the valid bit */
rotldi r11,r11,8
std r11,0(r10)
sync
clrrdi r11,r11,28 /* Get the esid part of the ste */
slbie r11
2: std r9,8(r10) /* Store the vsid part of the ste */
eieio
mfspr r11,SPRN_DAR /* Get the new esid */
clrrdi r11,r11,28 /* Permits a full 32b of ESID */
ori r11,r11,0x90 /* Turn on valid and kp */
std r11,0(r10) /* Put new entry back into the stab */
sync
/* All done -- return from exception. */
lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
ld r11,PACA_EXSLB+EX_SRR0(r13) /* get saved SRR0 */
andi. r10,r12,MSR_RI
beq- unrecov_slb
mtcrf 0x80,r9 /* restore CR */
mfmsr r10
clrrdi r10,r10,2
mtmsrd r10,1
mtspr SPRN_SRR0,r11
mtspr SPRN_SRR1,r12
ld r9,PACA_EXSLB+EX_R9(r13)
ld r10,PACA_EXSLB+EX_R10(r13)
ld r11,PACA_EXSLB+EX_R11(r13)
ld r12,PACA_EXSLB+EX_R12(r13)
ld r13,PACA_EXSLB+EX_R13(r13)
rfid
b . /* prevent speculative execution */
bad_stack:
ld r1,PACAEMERGSP(r13)
subi r1,r1,64+INT_FRAME_SIZE
std r9,_CCR(r1)
std r10,GPR1(r1)
std r11,_NIP(r1)
std r12,_MSR(r1)
mfspr r11,SPRN_DAR
mfspr r12,SPRN_DSISR
std r11,_DAR(r1)
std r12,_DSISR(r1)
mflr r10
mfctr r11
mfxer r12
std r10,_LINK(r1)
std r11,_CTR(r1)
std r12,_XER(r1)
SAVE_GPR(0,r1)
SAVE_GPR(2,r1)
ld r10,EX_R3(r3)
std r10,GPR3(r1)
SAVE_GPR(4,r1)
SAVE_4GPRS(5,r1)
ld r9,EX_R9(r3)
ld r10,EX_R10(r3)
SAVE_2GPRS(9,r1)
ld r9,EX_R11(r3)
ld r10,EX_R12(r3)
ld r11,EX_R13(r3)
std r9,GPR11(r1)
std r10,GPR12(r1)
std r11,GPR13(r1)
BEGIN_FTR_SECTION
ld r10,EX_CFAR(r3)
std r10,ORIG_GPR3(r1)
END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
SAVE_8GPRS(14,r1)
SAVE_10GPRS(22,r1)
lhz r12,PACA_TRAP_SAVE(r13)
std r12,_TRAP(r1)
addi r11,r1,INT_FRAME_SIZE
std r11,0(r1)
li r12,0
std r12,0(r11)
ld r2,PACATOC(r13)
ld r11,exception_marker@toc(r2)
std r12,RESULT(r1)
std r11,STACK_FRAME_OVERHEAD-16(r1)
1: addi r3,r1,STACK_FRAME_OVERHEAD
bl kernel_bad_stack
b 1b

30
arch/powerpc/kernel/head_64.S
View File

@ -180,6 +180,28 @@ exception_marker:
#include "exceptions-64s.S"
#endif
#ifdef CONFIG_PPC_BOOK3E
_GLOBAL(fsl_secondary_thread_init)
/* Enable branch prediction */
lis r3,BUCSR_INIT@h
ori r3,r3,BUCSR_INIT@l
mtspr SPRN_BUCSR,r3
isync
/*
* Fix PIR to match the linear numbering in the device tree.
*
* On e6500, the reset value of PIR uses the low three bits for
* the thread within a core, and the upper bits for the core
* number. There are two threads per core, so shift everything
* but the low bit right by two bits so that the cpu numbering is
* continuous.
*/
mfspr r3, SPRN_PIR
rlwimi r3, r3, 30, 2, 30
mtspr SPRN_PIR, r3
#endif
_GLOBAL(generic_secondary_thread_init)
mr r24,r3
@ -618,7 +640,7 @@ __secondary_start:
addi r14,r14,THREAD_SIZE-STACK_FRAME_OVERHEAD
std r14,PACAKSAVE(r13)
/* Do early setup for that CPU (stab, slb, hash table pointer) */
/* Do early setup for that CPU (SLB and hash table pointer) */
bl early_setup_secondary
/*
@ -771,8 +793,10 @@ start_here_multiplatform:
li r0,0
stdu r0,-STACK_FRAME_OVERHEAD(r1)
/* Do very early kernel initializations, including initial hash table,
* stab and slb setup before we turn on relocation. */
/*
* Do very early kernel initializations, including initial hash table
* and SLB setup before we turn on relocation.
*/
/* Restore parameters passed from prom_init/kexec */
mr r3,r31

69
arch/powerpc/kernel/idle_power7.S
View File

@ -135,17 +135,68 @@ _GLOBAL(power7_sleep)
b power7_powersave_common
/* No return */
/*
* Make opal call in realmode. This is a generic function to be called
* from realmode from reset vector. It handles endianess.
*
* r13 - paca pointer
* r1 - stack pointer
* r3 - opal token
*/
opal_call_realmode:
mflr r12
std r12,_LINK(r1)
ld r2,PACATOC(r13)
/* Set opal return address */
LOAD_REG_ADDR(r0,return_from_opal_call)
mtlr r0
/* Handle endian-ness */
li r0,MSR_LE
mfmsr r12
andc r12,r12,r0
mtspr SPRN_HSRR1,r12
mr r0,r3 /* Move opal token to r0 */
LOAD_REG_ADDR(r11,opal)
ld r12,8(r11)
ld r2,0(r11)
mtspr SPRN_HSRR0,r12
hrfid
return_from_opal_call:
FIXUP_ENDIAN
ld r0,_LINK(r1)
mtlr r0
blr
#define CHECK_HMI_INTERRUPT \
mfspr r0,SPRN_SRR1; \
BEGIN_FTR_SECTION_NESTED(66); \
rlwinm r0,r0,45-31,0xf; /* extract wake reason field (P8) */ \
FTR_SECTION_ELSE_NESTED(66); \
rlwinm r0,r0,45-31,0xe; /* P7 wake reason field is 3 bits */ \
ALT_FTR_SECTION_END_NESTED_IFSET(CPU_FTR_ARCH_207S, 66); \
cmpwi r0,0xa; /* Hypervisor maintenance ? */ \
bne 20f; \
/* Invoke opal call to handle hmi */ \
ld r2,PACATOC(r13); \
ld r1,PACAR1(r13); \
std r3,ORIG_GPR3(r1); /* Save original r3 */ \
li r3,OPAL_HANDLE_HMI; /* Pass opal token argument*/ \
bl opal_call_realmode; \
ld r3,ORIG_GPR3(r1); /* Restore original r3 */ \
20: nop;
_GLOBAL(power7_wakeup_tb_loss)
ld r2,PACATOC(r13);
ld r1,PACAR1(r13)
BEGIN_FTR_SECTION
CHECK_HMI_INTERRUPT
END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
/* Time base re-sync */
li r0,OPAL_RESYNC_TIMEBASE
LOAD_REG_ADDR(r11,opal);
ld r12,8(r11);
ld r2,0(r11);
mtctr r12
bctrl
li r3,OPAL_RESYNC_TIMEBASE
bl opal_call_realmode;
/* TODO: Check r3 for failure */
@ -163,6 +214,9 @@ _GLOBAL(power7_wakeup_tb_loss)
_GLOBAL(power7_wakeup_loss)
ld r1,PACAR1(r13)
BEGIN_FTR_SECTION
CHECK_HMI_INTERRUPT
END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
REST_NVGPRS(r1)
REST_GPR(2, r1)
ld r3,_CCR(r1)
@ -178,6 +232,9 @@ _GLOBAL(power7_wakeup_noloss)
lbz r0,PACA_NAPSTATELOST(r13)
cmpwi r0,0
bne power7_wakeup_loss
BEGIN_FTR_SECTION
CHECK_HMI_INTERRUPT
END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
ld r1,PACAR1(r13)
ld r4,_MSR(r1)
ld r5,_NIP(r1)

4
arch/powerpc/kernel/iommu.c
View File

@ -1037,7 +1037,7 @@ int iommu_tce_build(struct iommu_table *tbl, unsigned long entry,
/* if (unlikely(ret))
pr_err("iommu_tce: %s failed on hwaddr=%lx ioba=%lx kva=%lx ret=%d\n",
__func__, hwaddr, entry << IOMMU_PAGE_SHIFT(tbl),
__func__, hwaddr, entry << tbl->it_page_shift,
hwaddr, ret); */
return ret;
@ -1056,7 +1056,7 @@ int iommu_put_tce_user_mode(struct iommu_table *tbl, unsigned long entry,
direction != DMA_TO_DEVICE, &page);
if (unlikely(ret != 1)) {
/* pr_err("iommu_tce: get_user_pages_fast failed tce=%lx ioba=%lx ret=%d\n",
tce, entry << IOMMU_PAGE_SHIFT(tbl), ret); */
tce, entry << tbl->it_page_shift, ret); */
return -EFAULT;
}
hwaddr = (unsigned long) page_address(page) + offset;

14
arch/powerpc/kernel/irq.c
View File

@ -189,6 +189,11 @@ notrace unsigned int __check_irq_replay(void)
}
#endif /* CONFIG_PPC_BOOK3E */
/* Check if an hypervisor Maintenance interrupt happened */
local_paca->irq_happened &= ~PACA_IRQ_HMI;
if (happened & PACA_IRQ_HMI)
return 0xe60;
/* There should be nothing left ! */
BUG_ON(local_paca->irq_happened != 0);
@ -377,6 +382,14 @@ int arch_show_interrupts(struct seq_file *p, int prec)
seq_printf(p, "%10u ", per_cpu(irq_stat, j).mce_exceptions);
seq_printf(p, " Machine check exceptions\n");
if (cpu_has_feature(CPU_FTR_HVMODE)) {
seq_printf(p, "%*s: ", prec, "HMI");
for_each_online_cpu(j)
seq_printf(p, "%10u ",
per_cpu(irq_stat, j).hmi_exceptions);
seq_printf(p, " Hypervisor Maintenance Interrupts\n");
}
#ifdef CONFIG_PPC_DOORBELL
if (cpu_has_feature(CPU_FTR_DBELL)) {
seq_printf(p, "%*s: ", prec, "DBL");
@ -400,6 +413,7 @@ u64 arch_irq_stat_cpu(unsigned int cpu)
sum += per_cpu(irq_stat, cpu).mce_exceptions;
sum += per_cpu(irq_stat, cpu).spurious_irqs;
sum += per_cpu(irq_stat, cpu).timer_irqs_others;
sum += per_cpu(irq_stat, cpu).hmi_exceptions;
#ifdef CONFIG_PPC_DOORBELL
sum += per_cpu(irq_stat, cpu).doorbell_irqs;
#endif

34
arch/powerpc/kernel/process.c
View File

@ -1095,6 +1095,23 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
return 0;
}
static void setup_ksp_vsid(struct task_struct *p, unsigned long sp)
{
#ifdef CONFIG_PPC_STD_MMU_64
unsigned long sp_vsid;
unsigned long llp = mmu_psize_defs[mmu_linear_psize].sllp;
if (mmu_has_feature(MMU_FTR_1T_SEGMENT))
sp_vsid = get_kernel_vsid(sp, MMU_SEGSIZE_1T)
<< SLB_VSID_SHIFT_1T;
else
sp_vsid = get_kernel_vsid(sp, MMU_SEGSIZE_256M)
<< SLB_VSID_SHIFT;
sp_vsid |= SLB_VSID_KERNEL | llp;
p->thread.ksp_vsid = sp_vsid;
#endif
}
/*
* Copy a thread..
*/
@ -1174,21 +1191,8 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
p->thread.vr_save_area = NULL;
#endif
#ifdef CONFIG_PPC_STD_MMU_64
if (mmu_has_feature(MMU_FTR_SLB)) {
unsigned long sp_vsid;
unsigned long llp = mmu_psize_defs[mmu_linear_psize].sllp;
setup_ksp_vsid(p, sp);
if (mmu_has_feature(MMU_FTR_1T_SEGMENT))
sp_vsid = get_kernel_vsid(sp, MMU_SEGSIZE_1T)
<< SLB_VSID_SHIFT_1T;
else
sp_vsid = get_kernel_vsid(sp, MMU_SEGSIZE_256M)
<< SLB_VSID_SHIFT;
sp_vsid |= SLB_VSID_KERNEL | llp;
p->thread.ksp_vsid = sp_vsid;
}
#endif /* CONFIG_PPC_STD_MMU_64 */
#ifdef CONFIG_PPC64
if (cpu_has_feature(CPU_FTR_DSCR)) {
p->thread.dscr_inherit = current->thread.dscr_inherit;
@ -1577,7 +1581,7 @@ void show_stack(struct task_struct *tsk, unsigned long *stack)
struct pt_regs *regs = (struct pt_regs *)
(sp + STACK_FRAME_OVERHEAD);
lr = regs->link;
printk("--- Exception: %lx at %pS\n LR = %pS\n",
printk("--- interrupt: %lx at %pS\n LR = %pS\n",
regs->trap, (void *)regs->nip, (void *)lr);
firstframe = 1;
}

11
arch/powerpc/kernel/prom.c
View File

@ -155,7 +155,6 @@ static struct ibm_pa_feature {
} ibm_pa_features[] __initdata = {
{0, 0, PPC_FEATURE_HAS_MMU, 0, 0, 0},
{0, 0, PPC_FEATURE_HAS_FPU, 0, 1, 0},
{0, MMU_FTR_SLB, 0, 0, 2, 0},
{CPU_FTR_CTRL, 0, 0, 0, 3, 0},
{CPU_FTR_NOEXECUTE, 0, 0, 0, 6, 0},
{CPU_FTR_NODSISRALIGN, 0, 0, 1, 1, 1},
@ -309,12 +308,10 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
/* Get physical cpuid */
intserv = of_get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s", &len);
if (intserv) {
nthreads = len / sizeof(int);
} else {
intserv = of_get_flat_dt_prop(node, "reg", NULL);
nthreads = 1;
}
if (!intserv)
intserv = of_get_flat_dt_prop(node, "reg", &len);
nthreads = len / sizeof(int);
/*
* Now see if any of these threads match our boot cpu.

6
arch/powerpc/kernel/setup-common.c
View File

@ -456,18 +456,20 @@ void __init smp_setup_cpu_maps(void)
intserv = of_get_property(dn, "ibm,ppc-interrupt-server#s",
&len);
if (intserv) {
nthreads = len / sizeof(int);
DBG(" ibm,ppc-interrupt-server#s -> %d threads\n",
nthreads);
} else {
DBG(" no ibm,ppc-interrupt-server#s -> 1 thread\n");
intserv = of_get_property(dn, "reg", NULL);
intserv = of_get_property(dn, "reg", &len);
if (!intserv) {
cpu_be = cpu_to_be32(cpu);
intserv = &cpu_be; /* assume logical == phys */
len = 4;
}
}
nthreads = len / sizeof(int);
for (j = 0; j < nthreads && cpu < nr_cpu_ids; j++) {
bool avail;

15
arch/powerpc/kernel/setup_64.c
View File

@ -201,7 +201,11 @@ static void cpu_ready_for_interrupts(void)
/* Set IR and DR in PACA MSR */
get_paca()->kernel_msr = MSR_KERNEL;
/* Enable AIL if supported */
/*
* Enable AIL if supported, and we are in hypervisor mode. If we are
* not in hypervisor mode, we enable relocation-on interrupts later
* in pSeries_setup_arch() using the H_SET_MODE hcall.
*/
if (cpu_has_feature(CPU_FTR_HVMODE) &&
cpu_has_feature(CPU_FTR_ARCH_207S)) {
unsigned long lpcr = mfspr(SPRN_LPCR);
@ -507,7 +511,11 @@ void __init setup_system(void)
check_smt_enabled();
setup_tlb_core_data();
#ifdef CONFIG_SMP
/*
* Freescale Book3e parts spin in a loop provided by firmware,
* so smp_release_cpus() does nothing for them
*/
#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_FSL_BOOK3E)
/* Release secondary cpus out of their spinloops at 0x60 now that
* we can map physical -> logical CPU ids
*/
@ -673,9 +681,6 @@ void __init setup_arch(char **cmdline_p)
exc_lvl_early_init();
emergency_stack_init();
#ifdef CONFIG_PPC_STD_MMU_64
stabs_alloc();
#endif
/* set up the bootmem stuff with available memory */
do_init_bootmem();
sparse_init();

3
arch/powerpc/kernel/systbl.S
View File

@ -39,9 +39,6 @@
.section .rodata,"a"
#ifdef CONFIG_PPC64
#define sys_sigpending sys_ni_syscall
#define sys_old_getrlimit sys_ni_syscall
.p2align 3
#endif

26
arch/powerpc/kernel/traps.c
View File

@ -302,6 +302,16 @@ long machine_check_early(struct pt_regs *regs)
return handled;
}
long hmi_exception_realmode(struct pt_regs *regs)
{
__get_cpu_var(irq_stat).hmi_exceptions++;
if (ppc_md.hmi_exception_early)
ppc_md.hmi_exception_early(regs);
return 0;
}
#endif
/*
@ -609,7 +619,7 @@ int machine_check_e500(struct pt_regs *regs)
if (reason & MCSR_BUS_RBERR)
printk("Bus - Read Data Bus Error\n");
if (reason & MCSR_BUS_WBERR)
printk("Bus - Read Data Bus Error\n");
printk("Bus - Write Data Bus Error\n");
if (reason & MCSR_BUS_IPERR)
printk("Bus - Instruction Parity Error\n");
if (reason & MCSR_BUS_RPERR)
@ -738,6 +748,20 @@ void SMIException(struct pt_regs *regs)
die("System Management Interrupt", regs, SIGABRT);
}
void handle_hmi_exception(struct pt_regs *regs)
{
struct pt_regs *old_regs;
old_regs = set_irq_regs(regs);
irq_enter();
if (ppc_md.handle_hmi_exception)
ppc_md.handle_hmi_exception(regs);
irq_exit();
set_irq_regs(old_regs);
}
void unknown_exception(struct pt_regs *regs)
{
enum ctx_state prev_state = exception_enter();

6
arch/powerpc/kvm/book3s_hv_rmhandlers.S
View File

@ -159,6 +159,8 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
cmpwi r12, BOOK3S_INTERRUPT_EXTERNAL
BEGIN_FTR_SECTION
beq 11f
cmpwi cr2, r12, BOOK3S_INTERRUPT_HMI
beq cr2, 14f /* HMI check */
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206)
/* RFI into the highmem handler, or branch to interrupt handler */
@ -179,6 +181,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206)
13: b machine_check_fwnmi
14: mtspr SPRN_HSRR0, r8
mtspr SPRN_HSRR1, r7
b hmi_exception_after_realmode
kvmppc_primary_no_guest:
/* We handle this much like a ceded vcpu */
/* set our bit in napping_threads */

3
arch/powerpc/lib/copyuser_64.S
View File

@ -461,8 +461,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
/*
* Routine to copy a whole page of data, optimized for POWER4.
* On POWER4 it is more than 50% faster than the simple loop
* above (following the .Ldst_aligned label) but it runs slightly
* slower on POWER3.
* above (following the .Ldst_aligned label).
*/
.Lcopy_page_4K:
std r31,-32(1)

4
arch/powerpc/mm/Makefile
View File

@ -13,9 +13,7 @@ obj-$(CONFIG_PPC_MMU_NOHASH) += mmu_context_nohash.o tlb_nohash.o \
tlb_nohash_low.o
obj-$(CONFIG_PPC_BOOK3E) += tlb_low_$(CONFIG_WORD_SIZE)e.o
hash64-$(CONFIG_PPC_NATIVE) := hash_native_64.o
obj-$(CONFIG_PPC_STD_MMU_64) += hash_utils_64.o \
slb_low.o slb.o stab.o \
$(hash64-y)
obj-$(CONFIG_PPC_STD_MMU_64) += hash_utils_64.o slb_low.o slb.o $(hash64-y)
obj-$(CONFIG_PPC_STD_MMU_32) += ppc_mmu_32.o
obj-$(CONFIG_PPC_STD_MMU) += hash_low_$(CONFIG_WORD_SIZE).o \
tlb_hash$(CONFIG_WORD_SIZE).o \

26
arch/powerpc/mm/hash_utils_64.c
View File

@ -243,7 +243,7 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
}
#ifdef CONFIG_MEMORY_HOTPLUG
static int htab_remove_mapping(unsigned long vstart, unsigned long vend,
int htab_remove_mapping(unsigned long vstart, unsigned long vend,
int psize, int ssize)
{
unsigned long vaddr;
@ -821,21 +821,14 @@ static void __init htab_initialize(void)
void __init early_init_mmu(void)
{
/* Setup initial STAB address in the PACA */
get_paca()->stab_real = __pa((u64)&initial_stab);
get_paca()->stab_addr = (u64)&initial_stab;
/* Initialize the MMU Hash table and create the linear mapping
* of memory. Has to be done before stab/slb initialization as
* this is currently where the page size encoding is obtained
* of memory. Has to be done before SLB initialization as this is
* currently where the page size encoding is obtained.
*/
htab_initialize();
/* Initialize stab / SLB management */
if (mmu_has_feature(MMU_FTR_SLB))
slb_initialize();
else
stab_initialize(get_paca()->stab_real);
/* Initialize SLB management */
slb_initialize();
}
#ifdef CONFIG_SMP
@ -845,13 +838,8 @@ void early_init_mmu_secondary(void)
if (!firmware_has_feature(FW_FEATURE_LPAR))
mtspr(SPRN_SDR1, _SDR1);
/* Initialize STAB/SLB. We use a virtual address as it works
* in real mode on pSeries.
*/
if (mmu_has_feature(MMU_FTR_SLB))
slb_initialize();
else
stab_initialize(get_paca()->stab_addr);
/* Initialize SLB */
slb_initialize();
}
#endif /* CONFIG_SMP */

132
arch/powerpc/mm/init_64.c
View File

@ -175,9 +175,10 @@ static unsigned long __meminit vmemmap_section_start(unsigned long page)
static int __meminit vmemmap_populated(unsigned long start, int page_size)
{
unsigned long end = start + page_size;
start = (unsigned long)(pfn_to_page(vmemmap_section_start(start)));
for (; start < end; start += (PAGES_PER_SECTION * sizeof(struct page)))
if (pfn_valid(vmemmap_section_start(start)))
if (pfn_valid(page_to_pfn((struct page *)start)))
return 1;
return 0;
@ -212,6 +213,13 @@ static void __meminit vmemmap_create_mapping(unsigned long start,
for (i = 0; i < page_size; i += PAGE_SIZE)
BUG_ON(map_kernel_page(start + i, phys, flags));
}
#ifdef CONFIG_MEMORY_HOTPLUG
static void vmemmap_remove_mapping(unsigned long start,
unsigned long page_size)
{
}
#endif
#else /* CONFIG_PPC_BOOK3E */
static void __meminit vmemmap_create_mapping(unsigned long start,
unsigned long page_size,
@ -223,17 +231,42 @@ static void __meminit vmemmap_create_mapping(unsigned long start,
mmu_kernel_ssize);
BUG_ON(mapped < 0);
}
#ifdef CONFIG_MEMORY_HOTPLUG
extern int htab_remove_mapping(unsigned long vstart, unsigned long vend,
int psize, int ssize);
static void vmemmap_remove_mapping(unsigned long start,
unsigned long page_size)
{
int mapped = htab_remove_mapping(start, start + page_size,
mmu_vmemmap_psize,
mmu_kernel_ssize);
BUG_ON(mapped < 0);
}
#endif
#endif /* CONFIG_PPC_BOOK3E */
struct vmemmap_backing *vmemmap_list;
static struct vmemmap_backing *next;
static int num_left;
static int num_freed;
static __meminit struct vmemmap_backing * vmemmap_list_alloc(int node)
{
static struct vmemmap_backing *next;
static int num_left;
struct vmemmap_backing *vmem_back;
/* get from freed entries first */
if (num_freed) {
num_freed--;
vmem_back = next;
next = next->list;
return vmem_back;
}
/* allocate a page when required and hand out chunks */
if (!next || !num_left) {
if (!num_left) {
next = vmemmap_alloc_block(PAGE_SIZE, node);
if (unlikely(!next)) {
WARN_ON(1);
@ -296,10 +329,85 @@ int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node)
return 0;
}
void vmemmap_free(unsigned long start, unsigned long end)
#ifdef CONFIG_MEMORY_HOTPLUG
static unsigned long vmemmap_list_free(unsigned long start)
{
struct vmemmap_backing *vmem_back, *vmem_back_prev;
vmem_back_prev = vmem_back = vmemmap_list;
/* look for it with prev pointer recorded */
for (; vmem_back; vmem_back = vmem_back->list) {
if (vmem_back->virt_addr == start)
break;
vmem_back_prev = vmem_back;
}
if (unlikely(!vmem_back)) {
WARN_ON(1);
return 0;
}
/* remove it from vmemmap_list */
if (vmem_back == vmemmap_list) /* remove head */
vmemmap_list = vmem_back->list;
else
vmem_back_prev->list = vmem_back->list;
/* next point to this freed entry */
vmem_back->list = next;
next = vmem_back;
num_freed++;
return vmem_back->phys;
}
void __ref vmemmap_free(unsigned long start, unsigned long end)
{
unsigned long page_size = 1 << mmu_psize_defs[mmu_vmemmap_psize].shift;
start = _ALIGN_DOWN(start, page_size);
pr_debug("vmemmap_free %lx...%lx\n", start, end);
for (; start < end; start += page_size) {
unsigned long addr;
/*
* the section has already be marked as invalid, so
* vmemmap_populated() true means some other sections still
* in this page, so skip it.
*/
if (vmemmap_populated(start, page_size))
continue;
addr = vmemmap_list_free(start);
if (addr) {
struct page *page = pfn_to_page(addr >> PAGE_SHIFT);
if (PageReserved(page)) {
/* allocated from bootmem */
if (page_size < PAGE_SIZE) {
/*
* this shouldn't happen, but if it is
* the case, leave the memory there
*/
WARN_ON_ONCE(1);
} else {
unsigned int nr_pages =
1 << get_order(page_size);
while (nr_pages--)
free_reserved_page(page++);
}
} else
free_pages((unsigned long)(__va(addr)),
get_order(page_size));
vmemmap_remove_mapping(start, page_size);
}
}
}
#endif
void register_page_bootmem_memmap(unsigned long section_nr,
struct page *start_page, unsigned long size)
{
@ -331,16 +439,16 @@ struct page *realmode_pfn_to_page(unsigned long pfn)
if (pg_va < vmem_back->virt_addr)
continue;
/* Check that page struct is not split between real pages */
if ((pg_va + sizeof(struct page)) >
(vmem_back->virt_addr + page_size))
return NULL;
page = (struct page *) (vmem_back->phys + pg_va -
/* After vmemmap_list entry free is possible, need check all */
if ((pg_va + sizeof(struct page)) <=
(vmem_back->virt_addr + page_size)) {
page = (struct page *) (vmem_back->phys + pg_va -
vmem_back->virt_addr);
return page;
return page;
}
}
/* Probably that page struct is split between real pages */
return NULL;
}
EXPORT_SYMBOL_GPL(realmode_pfn_to_page);

2
arch/powerpc/mm/mmu_context_hash32.c
View File

@ -2,7 +2,7 @@
* This file contains the routines for handling the MMU on those
* PowerPC implementations where the MMU substantially follows the
* architecture specification. This includes the 6xx, 7xx, 7xxx,
* 8260, and POWER3 implementations but excludes the 8xx and 4xx.
* and 8260 implementations but excludes the 8xx and 4xx.
* -- paulus
*
* Derived from arch/ppc/mm/init.c:

2
arch/powerpc/mm/numa.c
View File

@ -611,8 +611,8 @@ static int cpu_numa_callback(struct notifier_block *nfb, unsigned long action,
case CPU_UP_CANCELED:
case CPU_UP_CANCELED_FROZEN:
unmap_cpu_from_node(lcpu);
break;
ret = NOTIFY_OK;
break;
#endif
}
return ret;

2
arch/powerpc/mm/pgtable_32.c
View File

@ -41,7 +41,7 @@ unsigned long ioremap_base;
unsigned long ioremap_bot;
EXPORT_SYMBOL(ioremap_bot); /* aka VMALLOC_END */
#if defined(CONFIG_6xx) || defined(CONFIG_POWER3)
#ifdef CONFIG_6xx
#define HAVE_BATS 1
#endif

2
arch/powerpc/mm/pgtable_64.c
View File

@ -68,7 +68,7 @@
unsigned long ioremap_bot = IOREMAP_BASE;
#ifdef CONFIG_PPC_MMU_NOHASH
static void *early_alloc_pgtable(unsigned long size)
static __ref void *early_alloc_pgtable(unsigned long size)
{
void *pt;

2
arch/powerpc/mm/ppc_mmu_32.c
View File

@ -2,7 +2,7 @@
* This file contains the routines for handling the MMU on those
* PowerPC implementations where the MMU substantially follows the
* architecture specification. This includes the 6xx, 7xx, 7xxx,
* 8260, and POWER3 implementations but excludes the 8xx and 4xx.
* and 8260 implementations but excludes the 8xx and 4xx.
* -- paulus
*
* Derived from arch/ppc/mm/init.c:

286
arch/powerpc/mm/stab.c
View File

@ -1,286 +0,0 @@
/*
* PowerPC64 Segment Translation Support.
*
* Dave Engebretsen and Mike Corrigan {engebret|mikejc}@us.ibm.com
* Copyright (c) 2001 Dave Engebretsen
*
* Copyright (C) 2002 Anton Blanchard <anton@au.ibm.com>, IBM
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/memblock.h>
#include <asm/pgtable.h>
#include <asm/mmu.h>
#include <asm/mmu_context.h>
#include <asm/paca.h>
#include <asm/cputable.h>
#include <asm/prom.h>
struct stab_entry {
unsigned long esid_data;
unsigned long vsid_data;
};
#define NR_STAB_CACHE_ENTRIES 8
static DEFINE_PER_CPU(long, stab_cache_ptr);
static DEFINE_PER_CPU(long [NR_STAB_CACHE_ENTRIES], stab_cache);
/*
* Create a segment table entry for the given esid/vsid pair.
*/
static int make_ste(unsigned long stab, unsigned long esid, unsigned long vsid)
{
unsigned long esid_data, vsid_data;
unsigned long entry, group, old_esid, castout_entry, i;
unsigned int global_entry;
struct stab_entry *ste, *castout_ste;
unsigned long kernel_segment = (esid << SID_SHIFT) >= PAGE_OFFSET;
vsid_data = vsid << STE_VSID_SHIFT;
esid_data = esid << SID_SHIFT | STE_ESID_KP | STE_ESID_V;
if (! kernel_segment)
esid_data |= STE_ESID_KS;
/* Search the primary group first. */
global_entry = (esid & 0x1f) << 3;
ste = (struct stab_entry *)(stab | ((esid & 0x1f) << 7));
/* Find an empty entry, if one exists. */
for (group = 0; group < 2; group++) {
for (entry = 0; entry < 8; entry++, ste++) {
if (!(ste->esid_data & STE_ESID_V)) {
ste->vsid_data = vsid_data;
eieio();
ste->esid_data = esid_data;
return (global_entry | entry);
}
}
/* Now search the secondary group. */
global_entry = ((~esid) & 0x1f) << 3;
ste = (struct stab_entry *)(stab | (((~esid) & 0x1f) << 7));
}
/*
* Could not find empty entry, pick one with a round robin selection.
* Search all entries in the two groups.
*/
castout_entry = get_paca()->stab_rr;
for (i = 0; i < 16; i++) {
if (castout_entry < 8) {
global_entry = (esid & 0x1f) << 3;
ste = (struct stab_entry *)(stab | ((esid & 0x1f) << 7));
castout_ste = ste + castout_entry;
} else {
global_entry = ((~esid) & 0x1f) << 3;
ste = (struct stab_entry *)(stab | (((~esid) & 0x1f) << 7));
castout_ste = ste + (castout_entry - 8);
}
/* Dont cast out the first kernel segment */
if ((castout_ste->esid_data & ESID_MASK) != PAGE_OFFSET)
break;
castout_entry = (castout_entry + 1) & 0xf;
}
get_paca()->stab_rr = (castout_entry + 1) & 0xf;
/* Modify the old entry to the new value. */
/* Force previous translations to complete. DRENG */
asm volatile("isync" : : : "memory");
old_esid = castout_ste->esid_data >> SID_SHIFT;
castout_ste->esid_data = 0; /* Invalidate old entry */
asm volatile("sync" : : : "memory"); /* Order update */
castout_ste->vsid_data = vsid_data;
eieio(); /* Order update */
castout_ste->esid_data = esid_data;
asm volatile("slbie %0" : : "r" (old_esid << SID_SHIFT));
/* Ensure completion of slbie */
asm volatile("sync" : : : "memory");
return (global_entry | (castout_entry & 0x7));
}
/*
* Allocate a segment table entry for the given ea and mm
*/
static int __ste_allocate(unsigned long ea, struct mm_struct *mm)
{
unsigned long vsid;
unsigned char stab_entry;
unsigned long offset;
/* Kernel or user address? */
if (is_kernel_addr(ea)) {
vsid = get_kernel_vsid(ea, MMU_SEGSIZE_256M);
} else {
if ((ea >= TASK_SIZE_USER64) || (! mm))
return 1;
vsid = get_vsid(mm->context.id, ea, MMU_SEGSIZE_256M);
}
stab_entry = make_ste(get_paca()->stab_addr, GET_ESID(ea), vsid);
if (!is_kernel_addr(ea)) {
offset = __get_cpu_var(stab_cache_ptr);
if (offset < NR_STAB_CACHE_ENTRIES)
__get_cpu_var(stab_cache[offset++]) = stab_entry;
else
offset = NR_STAB_CACHE_ENTRIES+1;
__get_cpu_var(stab_cache_ptr) = offset;
/* Order update */
asm volatile("sync":::"memory");
}
return 0;
}
int ste_allocate(unsigned long ea)
{
return __ste_allocate(ea, current->mm);
}
/*
* Do the segment table work for a context switch: flush all user
* entries from the table, then preload some probably useful entries
* for the new task
*/
void switch_stab(struct task_struct *tsk, struct mm_struct *mm)
{
struct stab_entry *stab = (struct stab_entry *) get_paca()->stab_addr;
struct stab_entry *ste;
unsigned long offset;
unsigned long pc = KSTK_EIP(tsk);
unsigned long stack = KSTK_ESP(tsk);
unsigned long unmapped_base;
/* Force previous translations to complete. DRENG */
asm volatile("isync" : : : "memory");
/*
* We need interrupts hard-disabled here, not just soft-disabled,
* so that a PMU interrupt can't occur, which might try to access
* user memory (to get a stack trace) and possible cause an STAB miss
* which would update the stab_cache/stab_cache_ptr per-cpu variables.
*/
hard_irq_disable();
offset = __get_cpu_var(stab_cache_ptr);
if (offset <= NR_STAB_CACHE_ENTRIES) {
int i;
for (i = 0; i < offset; i++) {
ste = stab + __get_cpu_var(stab_cache[i]);
ste->esid_data = 0; /* invalidate entry */
}
} else {
unsigned long entry;
/* Invalidate all entries. */
ste = stab;
/* Never flush the first entry. */
ste += 1;
for (entry = 1;
entry < (HW_PAGE_SIZE / sizeof(struct stab_entry));
entry++, ste++) {
unsigned long ea;
ea = ste->esid_data & ESID_MASK;
if (!is_kernel_addr(ea)) {
ste->esid_data = 0;
}
}
}
asm volatile("sync; slbia; sync":::"memory");
__get_cpu_var(stab_cache_ptr) = 0;
/* Now preload some entries for the new task */
if (test_tsk_thread_flag(tsk, TIF_32BIT))
unmapped_base = TASK_UNMAPPED_BASE_USER32;
else
unmapped_base = TASK_UNMAPPED_BASE_USER64;
__ste_allocate(pc, mm);
if (GET_ESID(pc) == GET_ESID(stack))
return;
__ste_allocate(stack, mm);
if ((GET_ESID(pc) == GET_ESID(unmapped_base))
|| (GET_ESID(stack) == GET_ESID(unmapped_base)))
return;
__ste_allocate(unmapped_base, mm);
/* Order update */
asm volatile("sync" : : : "memory");
}
/*
* Allocate segment tables for secondary CPUs. These must all go in
* the first (bolted) segment, so that do_stab_bolted won't get a
* recursive segment miss on the segment table itself.
*/
void __init stabs_alloc(void)
{
int cpu;
if (mmu_has_feature(MMU_FTR_SLB))
return;
for_each_possible_cpu(cpu) {
unsigned long newstab;
if (cpu == 0)
continue; /* stab for CPU 0 is statically allocated */
newstab = memblock_alloc_base(HW_PAGE_SIZE, HW_PAGE_SIZE,
1<<SID_SHIFT);
newstab = (unsigned long)__va(newstab);
memset((void *)newstab, 0, HW_PAGE_SIZE);
paca[cpu].stab_addr = newstab;
paca[cpu].stab_real = __pa(newstab);
printk(KERN_INFO "Segment table for CPU %d at 0x%llx "
"virtual, 0x%llx absolute\n",
cpu, paca[cpu].stab_addr, paca[cpu].stab_real);
}
}
/*
* Build an entry for the base kernel segment and put it into
* the segment table or SLB. All other segment table or SLB
* entries are faulted in.
*/
void stab_initialize(unsigned long stab)
{
unsigned long vsid = get_kernel_vsid(PAGE_OFFSET, MMU_SEGSIZE_256M);
unsigned long stabreal;
asm volatile("isync; slbia; isync":::"memory");
make_ste(stab, GET_ESID(PAGE_OFFSET), vsid);
/* Order update */
asm volatile("sync":::"memory");
/* Set ASR */
stabreal = get_paca()->stab_real | 0x1ul;
mtspr(SPRN_ASR, stabreal);
}

69
arch/powerpc/mm/tlb_low_64e.S
View File

@ -296,9 +296,12 @@ itlb_miss_fault_bolted:
* r14 = page table base
* r13 = PACA
* r11 = tlb_per_core ptr
* r10 = cpu number
* r10 = crap (free to use)
*/
tlb_miss_common_e6500:
crmove cr2*4+2,cr0*4+2 /* cr2.eq != 0 if kernel address */
BEGIN_FTR_SECTION /* CPU_FTR_SMT */
/*
* Search if we already have an indirect entry for that virtual
* address, and if we do, bail out.
@ -309,6 +312,7 @@ tlb_miss_common_e6500:
lhz r10,PACAPACAINDEX(r13)
cmpdi r15,0
cmpdi cr1,r15,1 /* set cr1.eq = 0 for non-recursive */
addi r10,r10,1
bne 2f
stbcx. r10,0,r11
bne 1b
@ -322,18 +326,62 @@ tlb_miss_common_e6500:
b 1b
.previous
/*
* Erratum A-008139 says that we can't use tlbwe to change
* an indirect entry in any way (including replacing or
* invalidating) if the other thread could be in the process
* of a lookup. The workaround is to invalidate the entry
* with tlbilx before overwriting.
*/
lbz r15,TCD_ESEL_NEXT(r11)
rlwinm r10,r15,16,0xff0000
oris r10,r10,MAS0_TLBSEL(1)@h
mtspr SPRN_MAS0,r10
isync
tlbre
mfspr r15,SPRN_MAS1
andis. r15,r15,MAS1_VALID@h
beq 5f
BEGIN_FTR_SECTION_NESTED(532)
mfspr r10,SPRN_MAS8
rlwinm r10,r10,0,0x80000fff /* tgs,tlpid -> sgs,slpid */
mtspr SPRN_MAS5,r10
END_FTR_SECTION_NESTED(CPU_FTR_EMB_HV,CPU_FTR_EMB_HV,532)
mfspr r10,SPRN_MAS1
rlwinm r15,r10,0,0x3fff0000 /* tid -> spid */
rlwimi r15,r10,20,0x00000003 /* ind,ts -> sind,sas */
mfspr r10,SPRN_MAS6
mtspr SPRN_MAS6,r15
mfspr r15,SPRN_MAS2
isync
tlbilxva 0,r15
isync
mtspr SPRN_MAS6,r10
5:
BEGIN_FTR_SECTION_NESTED(532)
li r10,0
mtspr SPRN_MAS8,r10
mtspr SPRN_MAS5,r10
END_FTR_SECTION_NESTED(CPU_FTR_EMB_HV,CPU_FTR_EMB_HV,532)
tlbsx 0,r16
mfspr r10,SPRN_MAS1
andis. r10,r10,MAS1_VALID@h
andis. r15,r10,MAS1_VALID@h
bne tlb_miss_done_e6500
/* Undo MAS-damage from the tlbsx */
FTR_SECTION_ELSE
mfspr r10,SPRN_MAS1
ALT_FTR_SECTION_END_IFSET(CPU_FTR_SMT)
oris r10,r10,MAS1_VALID@h
mtspr SPRN_MAS1,r10
mtspr SPRN_MAS2,r15
beq cr2,4f
rlwinm r10,r10,0,16,1 /* Clear TID */
4: mtspr SPRN_MAS1,r10
/* Now, we need to walk the page tables. First check if we are in
* range.
@ -394,11 +442,13 @@ tlb_miss_common_e6500:
tlb_miss_done_e6500:
.macro tlb_unlock_e6500
BEGIN_FTR_SECTION
beq cr1,1f /* no unlock if lock was recursively grabbed */
li r15,0
isync
stb r15,0(r11)
1:
END_FTR_SECTION_IFSET(CPU_FTR_SMT)
.endm
tlb_unlock_e6500
@ -407,12 +457,9 @@ tlb_miss_done_e6500:
rfi
tlb_miss_kernel_e6500:
mfspr r10,SPRN_MAS1
ld r14,PACA_KERNELPGD(r13)
cmpldi cr0,r15,8 /* Check for vmalloc region */
rlwinm r10,r10,0,16,1 /* Clear TID */
mtspr SPRN_MAS1,r10
beq+ tlb_miss_common_e6500
cmpldi cr1,r15,8 /* Check for vmalloc region */
beq+ cr1,tlb_miss_common_e6500
tlb_miss_fault_e6500:
tlb_unlock_e6500

2
arch/powerpc/oprofile/Makefile
View File

@ -14,6 +14,6 @@ oprofile-y := $(DRIVER_OBJS) common.o backtrace.o
oprofile-$(CONFIG_OPROFILE_CELL) += op_model_cell.o \
cell/spu_profiler.o cell/vma_map.o \
cell/spu_task_sync.o
oprofile-$(CONFIG_PPC_BOOK3S_64) += op_model_rs64.o op_model_power4.o op_model_pa6t.o
oprofile-$(CONFIG_PPC_BOOK3S_64) += op_model_power4.o op_model_pa6t.o
oprofile-$(CONFIG_FSL_EMB_PERFMON) += op_model_fsl_emb.o
oprofile-$(CONFIG_6xx) += op_model_7450.o

3
arch/powerpc/oprofile/common.c
View File

@ -205,9 +205,6 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
ops->sync_stop = model->sync_stop;
break;
#endif
case PPC_OPROFILE_RS64:
model = &op_model_rs64;
break;
case PPC_OPROFILE_POWER4:
model = &op_model_power4;
break;

222
arch/powerpc/oprofile/op_model_rs64.c
View File

@ -1,222 +0,0 @@
/*
* Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/oprofile.h>
#include <linux/smp.h>
#include <asm/ptrace.h>
#include <asm/processor.h>
#include <asm/cputable.h>
#include <asm/oprofile_impl.h>
#define dbg(args...)
static void ctrl_write(unsigned int i, unsigned int val)
{
unsigned int tmp = 0;
unsigned long shift = 0, mask = 0;
dbg("ctrl_write %d %x\n", i, val);
switch(i) {
case 0:
tmp = mfspr(SPRN_MMCR0);
shift = 6;
mask = 0x7F;
break;
case 1:
tmp = mfspr(SPRN_MMCR0);
shift = 0;
mask = 0x3F;
break;
case 2:
tmp = mfspr(SPRN_MMCR1);
shift = 31 - 4;
mask = 0x1F;
break;
case 3:
tmp = mfspr(SPRN_MMCR1);
shift = 31 - 9;
mask = 0x1F;
break;
case 4:
tmp = mfspr(SPRN_MMCR1);
shift = 31 - 14;
mask = 0x1F;
break;
case 5:
tmp = mfspr(SPRN_MMCR1);
shift = 31 - 19;
mask = 0x1F;
break;
case 6:
tmp = mfspr(SPRN_MMCR1);
shift = 31 - 24;
mask = 0x1F;
break;
case 7:
tmp = mfspr(SPRN_MMCR1);
shift = 31 - 28;
mask = 0xF;
break;
}
tmp = tmp & ~(mask << shift);
tmp |= val << shift;
switch(i) {
case 0:
case 1:
mtspr(SPRN_MMCR0, tmp);
break;
default:
mtspr(SPRN_MMCR1, tmp);
}
dbg("ctrl_write mmcr0 %lx mmcr1 %lx\n", mfspr(SPRN_MMCR0),
mfspr(SPRN_MMCR1));
}
static unsigned long reset_value[OP_MAX_COUNTER];
static int num_counters;
static int rs64_reg_setup(struct op_counter_config *ctr,
struct op_system_config *sys,
int num_ctrs)
{
int i;
num_counters = num_ctrs;
for (i = 0; i < num_counters; ++i)
reset_value[i] = 0x80000000UL - ctr[i].count;
/* XXX setup user and kernel profiling */
return 0;
}
static int rs64_cpu_setup(struct op_counter_config *ctr)
{
unsigned int mmcr0;
/* reset MMCR0 and set the freeze bit */
mmcr0 = MMCR0_FC;
mtspr(SPRN_MMCR0, mmcr0);
/* reset MMCR1, MMCRA */
mtspr(SPRN_MMCR1, 0);
if (cpu_has_feature(CPU_FTR_MMCRA))
mtspr(SPRN_MMCRA, 0);
mmcr0 |= MMCR0_FCM1|MMCR0_PMXE|MMCR0_FCECE;
/* Only applies to POWER3, but should be safe on RS64 */
mmcr0 |= MMCR0_PMC1CE|MMCR0_PMCjCE;
mtspr(SPRN_MMCR0, mmcr0);
dbg("setup on cpu %d, mmcr0 %lx\n", smp_processor_id(),
mfspr(SPRN_MMCR0));
dbg("setup on cpu %d, mmcr1 %lx\n", smp_processor_id(),
mfspr(SPRN_MMCR1));
return 0;
}
static int rs64_start(struct op_counter_config *ctr)
{
int i;
unsigned int mmcr0;
/* set the PMM bit (see comment below) */
mtmsrd(mfmsr() | MSR_PMM);
for (i = 0; i < num_counters; ++i) {
if (ctr[i].enabled) {
classic_ctr_write(i, reset_value[i]);
ctrl_write(i, ctr[i].event);
} else {
classic_ctr_write(i, 0);
}
}
mmcr0 = mfspr(SPRN_MMCR0);
/*
* now clear the freeze bit, counting will not start until we
* rfid from this excetion, because only at that point will
* the PMM bit be cleared
*/
mmcr0 &= ~MMCR0_FC;
mtspr(SPRN_MMCR0, mmcr0);
dbg("start on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0);
return 0;
}
static void rs64_stop(void)
{
unsigned int mmcr0;
/* freeze counters */
mmcr0 = mfspr(SPRN_MMCR0);
mmcr0 |= MMCR0_FC;
mtspr(SPRN_MMCR0, mmcr0);
dbg("stop on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0);
mb();
}
static void rs64_handle_interrupt(struct pt_regs *regs,
struct op_counter_config *ctr)
{
unsigned int mmcr0;
int is_kernel;
int val;
int i;
unsigned long pc = mfspr(SPRN_SIAR);
is_kernel = is_kernel_addr(pc);
/* set the PMM bit (see comment below) */
mtmsrd(mfmsr() | MSR_PMM);
for (i = 0; i < num_counters; ++i) {
val = classic_ctr_read(i);
if (val < 0) {
if (ctr[i].enabled) {
oprofile_add_ext_sample(pc, regs, i, is_kernel);
classic_ctr_write(i, reset_value[i]);
} else {
classic_ctr_write(i, 0);
}
}
}
mmcr0 = mfspr(SPRN_MMCR0);
/* reset the perfmon trigger */
mmcr0 |= MMCR0_PMXE;
/*
* now clear the freeze bit, counting will not start until we
* rfid from this exception, because only at that point will
* the PMM bit be cleared
*/
mmcr0 &= ~MMCR0_FC;
mtspr(SPRN_MMCR0, mmcr0);
}
struct op_powerpc_model op_model_rs64 = {
.reg_setup = rs64_reg_setup,
.cpu_setup = rs64_cpu_setup,
.start = rs64_start,
.stop = rs64_stop,
.handle_interrupt = rs64_handle_interrupt,
};

73
arch/powerpc/perf/core-book3s.c
View File

@ -36,7 +36,12 @@ struct cpu_hw_events {
struct perf_event *event[MAX_HWEVENTS];
u64 events[MAX_HWEVENTS];
unsigned int flags[MAX_HWEVENTS];
unsigned long mmcr[3];
/*
* The order of the MMCR array is:
* - 64-bit, MMCR0, MMCR1, MMCRA, MMCR2
* - 32-bit, MMCR0, MMCR1, MMCR2
*/
unsigned long mmcr[4];
struct perf_event *limited_counter[MAX_LIMITED_HWCOUNTERS];
u8 limited_hwidx[MAX_LIMITED_HWCOUNTERS];
u64 alternatives[MAX_HWEVENTS][MAX_EVENT_ALTERNATIVES];
@ -112,9 +117,9 @@ static bool is_ebb_event(struct perf_event *event) { return false; }
static int ebb_event_check(struct perf_event *event) { return 0; }
static void ebb_event_add(struct perf_event *event) { }
static void ebb_switch_out(unsigned long mmcr0) { }
static unsigned long ebb_switch_in(bool ebb, unsigned long mmcr0)
static unsigned long ebb_switch_in(bool ebb, struct cpu_hw_events *cpuhw)
{
return mmcr0;
return cpuhw->mmcr[0];
}
static inline void power_pmu_bhrb_enable(struct perf_event *event) {}
@ -542,8 +547,10 @@ static void ebb_switch_out(unsigned long mmcr0)
current->thread.mmcr2 = mfspr(SPRN_MMCR2) & MMCR2_USER_MASK;
}
static unsigned long ebb_switch_in(bool ebb, unsigned long mmcr0)
static unsigned long ebb_switch_in(bool ebb, struct cpu_hw_events *cpuhw)
{
unsigned long mmcr0 = cpuhw->mmcr[0];
if (!ebb)
goto out;
@ -568,7 +575,15 @@ static unsigned long ebb_switch_in(bool ebb, unsigned long mmcr0)
mtspr(SPRN_SIAR, current->thread.siar);
mtspr(SPRN_SIER, current->thread.sier);
mtspr(SPRN_SDAR, current->thread.sdar);
mtspr(SPRN_MMCR2, current->thread.mmcr2);
/*
* Merge the kernel & user values of MMCR2. The semantics we implement
* are that the user MMCR2 can set bits, ie. cause counters to freeze,
* but not clear bits. If a task wants to be able to clear bits, ie.
* unfreeze counters, it should not set exclude_xxx in its events and
* instead manage the MMCR2 entirely by itself.
*/
mtspr(SPRN_MMCR2, cpuhw->mmcr[3] | current->thread.mmcr2);
out:
return mmcr0;
}
@ -915,6 +930,14 @@ static int check_excludes(struct perf_event **ctrs, unsigned int cflags[],
int i, n, first;
struct perf_event *event;
/*
* If the PMU we're on supports per event exclude settings then we
* don't need to do any of this logic. NB. This assumes no PMU has both
* per event exclude and limited PMCs.
*/
if (ppmu->flags & PPMU_ARCH_207S)
return 0;
n = n_prev + n_new;
if (n <= 1)
return 0;
@ -1219,28 +1242,31 @@ static void power_pmu_enable(struct pmu *pmu)
}
/*
* Compute MMCR* values for the new set of events
* Clear all MMCR settings and recompute them for the new set of events.
*/
memset(cpuhw->mmcr, 0, sizeof(cpuhw->mmcr));
if (ppmu->compute_mmcr(cpuhw->events, cpuhw->n_events, hwc_index,
cpuhw->mmcr)) {
cpuhw->mmcr, cpuhw->event)) {
/* shouldn't ever get here */
printk(KERN_ERR "oops compute_mmcr failed\n");
goto out;
}
/*
* Add in MMCR0 freeze bits corresponding to the
* attr.exclude_* bits for the first event.
* We have already checked that all events have the
* same values for these bits as the first event.
*/
event = cpuhw->event[0];
if (event->attr.exclude_user)
cpuhw->mmcr[0] |= MMCR0_FCP;
if (event->attr.exclude_kernel)
cpuhw->mmcr[0] |= freeze_events_kernel;
if (event->attr.exclude_hv)
cpuhw->mmcr[0] |= MMCR0_FCHV;
if (!(ppmu->flags & PPMU_ARCH_207S)) {
/*
* Add in MMCR0 freeze bits corresponding to the attr.exclude_*
* bits for the first event. We have already checked that all
* events have the same value for these bits as the first event.
*/
event = cpuhw->event[0];
if (event->attr.exclude_user)
cpuhw->mmcr[0] |= MMCR0_FCP;
if (event->attr.exclude_kernel)
cpuhw->mmcr[0] |= freeze_events_kernel;
if (event->attr.exclude_hv)
cpuhw->mmcr[0] |= MMCR0_FCHV;
}
/*
* Write the new configuration to MMCR* with the freeze
@ -1252,6 +1278,8 @@ static void power_pmu_enable(struct pmu *pmu)
mtspr(SPRN_MMCR1, cpuhw->mmcr[1]);
mtspr(SPRN_MMCR0, (cpuhw->mmcr[0] & ~(MMCR0_PMC1CE | MMCR0_PMCjCE))
| MMCR0_FC);
if (ppmu->flags & PPMU_ARCH_207S)
mtspr(SPRN_MMCR2, cpuhw->mmcr[3]);
/*
* Read off any pre-existing events that need to move
@ -1307,10 +1335,7 @@ static void power_pmu_enable(struct pmu *pmu)
out_enable:
pmao_restore_workaround(ebb);
if (ppmu->flags & PPMU_ARCH_207S)
mtspr(SPRN_MMCR2, 0);
mmcr0 = ebb_switch_in(ebb, cpuhw->mmcr[0]);
mmcr0 = ebb_switch_in(ebb, cpuhw);
mb();
if (cpuhw->bhrb_users)

5
arch/powerpc/perf/mpc7450-pmu.c
View File

@ -260,8 +260,9 @@ static const u32 pmcsel_mask[N_COUNTER] = {
/*
* Compute MMCR0/1/2 values for a set of events.
*/
static int mpc7450_compute_mmcr(u64 event[], int n_ev,
unsigned int hwc[], unsigned long mmcr[])
static int mpc7450_compute_mmcr(u64 event[], int n_ev, unsigned int hwc[],
unsigned long mmcr[],
struct perf_event *pevents[])
{
u8 event_index[N_CLASSES][N_COUNTER];
int n_classevent[N_CLASSES];

2
arch/powerpc/perf/power4-pmu.c
View File

@ -356,7 +356,7 @@ static int p4_get_alternatives(u64 event, unsigned int flags, u64 alt[])
}
static int p4_compute_mmcr(u64 event[], int n_ev,
unsigned int hwc[], unsigned long mmcr[])
unsigned int hwc[], unsigned long mmcr[], struct perf_event *pevents[])
{
unsigned long mmcr0 = 0, mmcr1 = 0, mmcra = 0;
unsigned int pmc, unit, byte, psel, lower;

2
arch/powerpc/perf/power5+-pmu.c
View File

@ -452,7 +452,7 @@ static int power5p_marked_instr_event(u64 event)
}
static int power5p_compute_mmcr(u64 event[], int n_ev,
unsigned int hwc[], unsigned long mmcr[])
unsigned int hwc[], unsigned long mmcr[], struct perf_event *pevents[])
{
unsigned long mmcr1 = 0;
unsigned long mmcra = 0;

2
arch/powerpc/perf/power5-pmu.c
View File

@ -383,7 +383,7 @@ static int power5_marked_instr_event(u64 event)
}
static int power5_compute_mmcr(u64 event[], int n_ev,
unsigned int hwc[], unsigned long mmcr[])
unsigned int hwc[], unsigned long mmcr[], struct perf_event *pevents[])
{
unsigned long mmcr1 = 0;
unsigned long mmcra = MMCRA_SDAR_DCACHE_MISS | MMCRA_SDAR_ERAT_MISS;

2
arch/powerpc/perf/power6-pmu.c
View File

@ -175,7 +175,7 @@ static int power6_marked_instr_event(u64 event)
* Assign PMC numbers and compute MMCR1 value for a set of events
*/
static int p6_compute_mmcr(u64 event[], int n_ev,
unsigned int hwc[], unsigned long mmcr[])
unsigned int hwc[], unsigned long mmcr[], struct perf_event *pevents[])
{
unsigned long mmcr1 = 0;
unsigned long mmcra = MMCRA_SDAR_DCACHE_MISS | MMCRA_SDAR_ERAT_MISS;

2
arch/powerpc/perf/power7-pmu.c
View File

@ -245,7 +245,7 @@ static int power7_marked_instr_event(u64 event)
}
static int power7_compute_mmcr(u64 event[], int n_ev,
unsigned int hwc[], unsigned long mmcr[])
unsigned int hwc[], unsigned long mmcr[], struct perf_event *pevents[])
{
unsigned long mmcr1 = 0;
unsigned long mmcra = MMCRA_SDAR_DCACHE_MISS | MMCRA_SDAR_ERAT_MISS;

27
arch/powerpc/perf/power8-pmu.c
View File

@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/perf_event.h>
#include <asm/firmware.h>
#include <asm/cputable.h>
/*
@ -266,6 +267,11 @@
#define MMCRA_SDAR_MODE_TLB (1ull << 42)
#define MMCRA_IFM_SHIFT 30
/* Bits in MMCR2 for POWER8 */
#define MMCR2_FCS(pmc) (1ull << (63 - (((pmc) - 1) * 9)))
#define MMCR2_FCP(pmc) (1ull << (62 - (((pmc) - 1) * 9)))
#define MMCR2_FCH(pmc) (1ull << (57 - (((pmc) - 1) * 9)))
static inline bool event_is_fab_match(u64 event)
{
@ -393,9 +399,10 @@ static int power8_get_constraint(u64 event, unsigned long *maskp, unsigned long
}
static int power8_compute_mmcr(u64 event[], int n_ev,
unsigned int hwc[], unsigned long mmcr[])
unsigned int hwc[], unsigned long mmcr[],
struct perf_event *pevents[])
{
unsigned long mmcra, mmcr1, unit, combine, psel, cache, val;
unsigned long mmcra, mmcr1, mmcr2, unit, combine, psel, cache, val;
unsigned int pmc, pmc_inuse;
int i;
@ -410,7 +417,7 @@ static int power8_compute_mmcr(u64 event[], int n_ev,
/* In continous sampling mode, update SDAR on TLB miss */
mmcra = MMCRA_SDAR_MODE_TLB;
mmcr1 = 0;
mmcr1 = mmcr2 = 0;
/* Second pass: assign PMCs, set all MMCR1 fields */
for (i = 0; i < n_ev; ++i) {
@ -472,6 +479,19 @@ static int power8_compute_mmcr(u64 event[], int n_ev,
mmcra |= val << MMCRA_IFM_SHIFT;
}
if (pevents[i]->attr.exclude_user)
mmcr2 |= MMCR2_FCP(pmc);
if (pevents[i]->attr.exclude_hv)
mmcr2 |= MMCR2_FCH(pmc);
if (pevents[i]->attr.exclude_kernel) {
if (cpu_has_feature(CPU_FTR_HVMODE))
mmcr2 |= MMCR2_FCH(pmc);
else
mmcr2 |= MMCR2_FCS(pmc);
}
hwc[i] = pmc - 1;
}
@ -491,6 +511,7 @@ static int power8_compute_mmcr(u64 event[], int n_ev,
mmcr[1] = mmcr1;
mmcr[2] = mmcra;
mmcr[3] = mmcr2;
return 0;
}

2
arch/powerpc/perf/ppc970-pmu.c
View File

@ -257,7 +257,7 @@ static int p970_get_alternatives(u64 event, unsigned int flags, u64 alt[])
}
static int p970_compute_mmcr(u64 event[], int n_ev,
unsigned int hwc[], unsigned long mmcr[])
unsigned int hwc[], unsigned long mmcr[], struct perf_event *pevents[])
{
unsigned long mmcr0 = 0, mmcr1 = 0, mmcra = 0;
unsigned int pmc, unit, byte, psel;

2
arch/powerpc/platforms/85xx/Kconfig
View File

@ -274,7 +274,7 @@ config CORENET_GENERIC
For 32bit kernel, the following boards are supported:
P2041 RDB, P3041 DS, P4080 DS, kmcoge4, and OCA4080
For 64bit kernel, the following boards are supported:
T4240 QDS and B4 QDS
T208x QDS/RDB, T4240 QDS/RDB and B4 QDS
The following boards are supported for both 32bit and 64bit kernel:
P5020 DS, P5040 DS and T104xQDS

53
arch/powerpc/platforms/85xx/corenet_generic.c
View File

@ -119,7 +119,11 @@ static const char * const boards[] __initconst = {
"fsl,P4080DS",
"fsl,P5020DS",
"fsl,P5040DS",
"fsl,T2080QDS",
"fsl,T2080RDB",
"fsl,T2081QDS",
"fsl,T4240QDS",
"fsl,T4240RDB",
"fsl,B4860QDS",
"fsl,B4420QDS",
"fsl,B4220QDS",
@ -129,28 +133,14 @@ static const char * const boards[] __initconst = {
NULL
};
static const char * const hv_boards[] __initconst = {
"fsl,P2041RDB-hv",
"fsl,P3041DS-hv",
"fsl,OCA4080-hv",
"fsl,P4080DS-hv",
"fsl,P5020DS-hv",
"fsl,P5040DS-hv",
"fsl,T4240QDS-hv",
"fsl,B4860QDS-hv",
"fsl,B4420QDS-hv",
"fsl,B4220QDS-hv",
"fsl,T1040QDS-hv",
"fsl,T1042QDS-hv",
NULL
};
/*
* Called very early, device-tree isn't unflattened
*/
static int __init corenet_generic_probe(void)
{
unsigned long root = of_get_flat_dt_root();
char hv_compat[24];
int i;
#ifdef CONFIG_SMP
extern struct smp_ops_t smp_85xx_ops;
#endif
@ -159,21 +149,26 @@ static int __init corenet_generic_probe(void)
return 1;
/* Check if we're running under the Freescale hypervisor */
if (of_flat_dt_match(root, hv_boards)) {
ppc_md.init_IRQ = ehv_pic_init;
ppc_md.get_irq = ehv_pic_get_irq;
ppc_md.restart = fsl_hv_restart;
ppc_md.power_off = fsl_hv_halt;
ppc_md.halt = fsl_hv_halt;
for (i = 0; boards[i]; i++) {
snprintf(hv_compat, sizeof(hv_compat), "%s-hv", boards[i]);
if (of_flat_dt_is_compatible(root, hv_compat)) {
ppc_md.init_IRQ = ehv_pic_init;
ppc_md.get_irq = ehv_pic_get_irq;
ppc_md.restart = fsl_hv_restart;
ppc_md.power_off = fsl_hv_halt;
ppc_md.halt = fsl_hv_halt;
#ifdef CONFIG_SMP
/*
* Disable the timebase sync operations because we can't write
* to the timebase registers under the hypervisor.
*/
smp_85xx_ops.give_timebase = NULL;
smp_85xx_ops.take_timebase = NULL;
/*
* Disable the timebase sync operations because we
* can't write to the timebase registers under the
* hypervisor.
*/
smp_85xx_ops.give_timebase = NULL;
smp_85xx_ops.take_timebase = NULL;
#endif
return 1;
return 1;
}
}
return 0;

44
arch/powerpc/platforms/85xx/smp.c
View File

@ -28,6 +28,7 @@
#include <asm/dbell.h>
#include <asm/fsl_guts.h>
#include <asm/code-patching.h>
#include <asm/cputhreads.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/mpic.h>
@ -168,6 +169,24 @@ static inline u32 read_spin_table_addr_l(void *spin_table)
return in_be32(&((struct epapr_spin_table *)spin_table)->addr_l);
}
#ifdef CONFIG_PPC64
static void wake_hw_thread(void *info)
{
void fsl_secondary_thread_init(void);
unsigned long imsr1, inia1;
int nr = *(const int *)info;
imsr1 = MSR_KERNEL;
inia1 = *(unsigned long *)fsl_secondary_thread_init;
mttmr(TMRN_IMSR1, imsr1);
mttmr(TMRN_INIA1, inia1);
mtspr(SPRN_TENS, TEN_THREAD(1));
smp_generic_kick_cpu(nr);
}
#endif
static int smp_85xx_kick_cpu(int nr)
{
unsigned long flags;
@ -183,6 +202,31 @@ static int smp_85xx_kick_cpu(int nr)
pr_debug("smp_85xx_kick_cpu: kick CPU #%d\n", nr);
#ifdef CONFIG_PPC64
/* Threads don't use the spin table */
if (cpu_thread_in_core(nr) != 0) {
int primary = cpu_first_thread_sibling(nr);
if (WARN_ON_ONCE(!cpu_has_feature(CPU_FTR_SMT)))
return -ENOENT;
if (cpu_thread_in_core(nr) != 1) {
pr_err("%s: cpu %d: invalid hw thread %d\n",
__func__, nr, cpu_thread_in_core(nr));
return -ENOENT;
}
if (!cpu_online(primary)) {
pr_err("%s: cpu %d: primary %d not online\n",
__func__, nr, primary);
return -ENOENT;
}
smp_call_function_single(primary, wake_hw_thread, &nr, 0);
return 0;
}
#endif
np = of_get_cpu_node(nr, NULL);
cpu_rel_addr = of_get_property(np, "cpu-release-addr", NULL);

3
arch/powerpc/platforms/8xx/m8xx_setup.c
View File

@ -18,7 +18,6 @@
#include <linux/fsl_devices.h>
#include <asm/io.h>
#include <asm/mpc8xx.h>
#include <asm/8xx_immap.h>
#include <asm/prom.h>
#include <asm/fs_pd.h>
@ -28,8 +27,6 @@
#include "mpc8xx.h"
struct mpc8xx_pcmcia_ops m8xx_pcmcia_ops;
extern int cpm_pic_init(void);
extern int cpm_get_irq(void);

62
arch/powerpc/platforms/8xx/mpc885ads_setup.c
View File

@ -35,7 +35,6 @@
#include <asm/page.h>
#include <asm/processor.h>
#include <asm/time.h>
#include <asm/mpc8xx.h>
#include <asm/8xx_immap.h>
#include <asm/cpm1.h>
#include <asm/fs_pd.h>
@ -46,61 +45,6 @@
static u32 __iomem *bcsr, *bcsr5;
#ifdef CONFIG_PCMCIA_M8XX
static void pcmcia_hw_setup(int slot, int enable)
{
if (enable)
clrbits32(&bcsr[1], BCSR1_PCCEN);
else
setbits32(&bcsr[1], BCSR1_PCCEN);
}
static int pcmcia_set_voltage(int slot, int vcc, int vpp)
{
u32 reg = 0;
switch (vcc) {
case 0:
break;
case 33:
reg |= BCSR1_PCCVCC0;
break;
case 50:
reg |= BCSR1_PCCVCC1;
break;
default:
return 1;
}
switch (vpp) {
case 0:
break;
case 33:
case 50:
if (vcc == vpp)
reg |= BCSR1_PCCVPP1;
else
return 1;
break;
case 120:
if ((vcc == 33) || (vcc == 50))
reg |= BCSR1_PCCVPP0;
else
return 1;
default:
return 1;
}
/* first, turn off all power */
clrbits32(&bcsr[1], 0x00610000);
/* enable new powersettings */
setbits32(&bcsr[1], reg);
return 0;
}
#endif
struct cpm_pin {
int port, pin, flags;
};
@ -245,12 +189,6 @@ static void __init mpc885ads_setup_arch(void)
of_detach_node(np);
of_node_put(np);
}
#ifdef CONFIG_PCMCIA_M8XX
/* Set up board specific hook-ups.*/
m8xx_pcmcia_ops.hw_ctrl = pcmcia_hw_setup;
m8xx_pcmcia_ops.voltage_set = pcmcia_set_voltage;
#endif
}
static int __init mpc885ads_probe(void)

1
arch/powerpc/platforms/8xx/tqm8xx_setup.c
View File

@ -37,7 +37,6 @@
#include <asm/page.h>
#include <asm/processor.h>
#include <asm/time.h>
#include <asm/mpc8xx.h>
#include <asm/8xx_immap.h>
#include <asm/cpm1.h>
#include <asm/fs_pd.h>

18
arch/powerpc/platforms/Kconfig.cputype
View File

@ -61,7 +61,7 @@ choice
help
There are two families of 64 bit PowerPC chips supported.
The most common ones are the desktop and server CPUs
(POWER3, RS64, POWER4, POWER5, POWER5+, POWER6, ...)
(POWER4, POWER5, 970, POWER5+, POWER6, POWER7, POWER8 ...)
The other are the "embedded" processors compliant with the
"Book 3E" variant of the architecture
@ -140,14 +140,6 @@ config 6xx
depends on PPC32 && PPC_BOOK3S
select PPC_HAVE_PMU_SUPPORT
config POWER3
depends on PPC64 && PPC_BOOK3S
def_bool y
config POWER4
depends on PPC64 && PPC_BOOK3S
def_bool y
config TUNE_CELL
bool "Optimize for Cell Broadband Engine"
depends on PPC64 && PPC_BOOK3S
@ -244,7 +236,7 @@ config PHYS_64BIT
config ALTIVEC
bool "AltiVec Support"
depends on 6xx || POWER4 || (PPC_E500MC && PPC64)
depends on 6xx || PPC_BOOK3S_64 || (PPC_E500MC && PPC64)
---help---
This option enables kernel support for the Altivec extensions to the
PowerPC processor. The kernel currently supports saving and restoring
@ -260,7 +252,7 @@ config ALTIVEC
config VSX
bool "VSX Support"
depends on POWER4 && ALTIVEC && PPC_FPU
depends on PPC_BOOK3S_64 && ALTIVEC && PPC_FPU
---help---
This option enables kernel support for the Vector Scaler extensions
@ -276,7 +268,7 @@ config VSX
config PPC_ICSWX
bool "Support for PowerPC icswx coprocessor instruction"
depends on POWER4
depends on PPC_BOOK3S_64
default n
---help---
@ -294,7 +286,7 @@ config PPC_ICSWX
config PPC_ICSWX_PID
bool "icswx requires direct PID management"
depends on PPC_ICSWX && POWER4
depends on PPC_ICSWX
default y
---help---
The PID register in server is used explicitly for ICSWX. In

2
arch/powerpc/platforms/powermac/Kconfig
View File

@ -10,7 +10,7 @@ config PPC_PMAC
config PPC_PMAC64
bool
depends on PPC_PMAC && POWER4
depends on PPC_PMAC && PPC64
select MPIC
select U3_DART
select MPIC_U3_HT_IRQS

42
arch/powerpc/platforms/powermac/feature.c
View File

@ -158,7 +158,7 @@ static inline int simple_feature_tweak(struct device_node *node, int type,
return 0;
}
#ifndef CONFIG_POWER4
#ifndef CONFIG_PPC64
static long ohare_htw_scc_enable(struct device_node *node, long param,
long value)
@ -1318,7 +1318,7 @@ intrepid_aack_delay_enable(struct device_node *node, long param, long value)
}
#endif /* CONFIG_POWER4 */
#endif /* CONFIG_PPC64 */
static long
core99_read_gpio(struct device_node *node, long param, long value)
@ -1338,7 +1338,7 @@ core99_write_gpio(struct device_node *node, long param, long value)
return 0;
}
#ifdef CONFIG_POWER4
#ifdef CONFIG_PPC64
static long g5_gmac_enable(struct device_node *node, long param, long value)
{
struct macio_chip *macio = &macio_chips[0];
@ -1550,9 +1550,9 @@ void g5_phy_disable_cpu1(void)
if (uninorth_maj == 3)
UN_OUT(U3_API_PHY_CONFIG_1, 0);
}
#endif /* CONFIG_POWER4 */
#endif /* CONFIG_PPC64 */
#ifndef CONFIG_POWER4
#ifndef CONFIG_PPC64
#ifdef CONFIG_PM
@ -1864,7 +1864,7 @@ core99_sleep_state(struct device_node *node, long param, long value)
return 0;
}
#endif /* CONFIG_POWER4 */
#endif /* CONFIG_PPC64 */
static long
generic_dev_can_wake(struct device_node *node, long param, long value)
@ -1906,7 +1906,7 @@ static struct feature_table_entry any_features[] = {
{ 0, NULL }
};
#ifndef CONFIG_POWER4
#ifndef CONFIG_PPC64
/* OHare based motherboards. Currently, we only use these on the
* 2400,3400 and 3500 series powerbooks. Some older desktops seem
@ -2056,7 +2056,7 @@ static struct feature_table_entry intrepid_features[] = {
{ 0, NULL }
};
#else /* CONFIG_POWER4 */
#else /* CONFIG_PPC64 */
/* G5 features
*/
@ -2074,10 +2074,10 @@ static struct feature_table_entry g5_features[] = {
{ 0, NULL }
};
#endif /* CONFIG_POWER4 */
#endif /* CONFIG_PPC64 */
static struct pmac_mb_def pmac_mb_defs[] = {
#ifndef CONFIG_POWER4
#ifndef CONFIG_PPC64
/*
* Desktops
*/
@ -2342,7 +2342,7 @@ static struct pmac_mb_def pmac_mb_defs[] = {
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
},
#else /* CONFIG_POWER4 */
#else /* CONFIG_PPC64 */
{ "PowerMac7,2", "PowerMac G5",
PMAC_TYPE_POWERMAC_G5, g5_features,
0,
@ -2373,7 +2373,7 @@ static struct pmac_mb_def pmac_mb_defs[] = {
0,
},
#endif /* CONFIG_PPC64 */
#endif /* CONFIG_POWER4 */
#endif /* CONFIG_PPC64 */
};
/*
@ -2441,7 +2441,7 @@ static int __init probe_motherboard(void)
/* Fallback to selection depending on mac-io chip type */
switch(macio->type) {
#ifndef CONFIG_POWER4
#ifndef CONFIG_PPC64
case macio_grand_central:
pmac_mb.model_id = PMAC_TYPE_PSURGE;
pmac_mb.model_name = "Unknown PowerSurge";
@ -2475,7 +2475,7 @@ static int __init probe_motherboard(void)
pmac_mb.model_name = "Unknown Intrepid-based";
pmac_mb.features = intrepid_features;
break;
#else /* CONFIG_POWER4 */
#else /* CONFIG_PPC64 */
case macio_keylargo2:
pmac_mb.model_id = PMAC_TYPE_UNKNOWN_K2;
pmac_mb.model_name = "Unknown K2-based";
@ -2486,13 +2486,13 @@ static int __init probe_motherboard(void)
pmac_mb.model_name = "Unknown Shasta-based";
pmac_mb.features = g5_features;
break;
#endif /* CONFIG_POWER4 */
#endif /* CONFIG_PPC64 */
default:
ret = -ENODEV;
goto done;
}
found:
#ifndef CONFIG_POWER4
#ifndef CONFIG_PPC64
/* Fixup Hooper vs. Comet */
if (pmac_mb.model_id == PMAC_TYPE_HOOPER) {
u32 __iomem * mach_id_ptr = ioremap(0xf3000034, 4);
@ -2546,9 +2546,9 @@ found:
*/
powersave_lowspeed = 1;
#else /* CONFIG_POWER4 */
#else /* CONFIG_PPC64 */
powersave_nap = 1;
#endif /* CONFIG_POWER4 */
#endif /* CONFIG_PPC64 */
/* Check for "mobile" machine */
if (model && (strncmp(model, "PowerBook", 9) == 0
@ -2786,7 +2786,7 @@ set_initial_features(void)
MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
}
#ifdef CONFIG_POWER4
#ifdef CONFIG_PPC64
if (macio_chips[0].type == macio_keylargo2 ||
macio_chips[0].type == macio_shasta) {
#ifndef CONFIG_SMP
@ -2826,7 +2826,7 @@ set_initial_features(void)
np = of_find_node_by_name(np, "firewire");
}
}
#else /* CONFIG_POWER4 */
#else /* CONFIG_PPC64 */
if (macio_chips[0].type == macio_keylargo ||
macio_chips[0].type == macio_pangea ||
@ -2895,7 +2895,7 @@ set_initial_features(void)
MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N);
}
#endif /* CONFIG_POWER4 */
#endif /* CONFIG_PPC64 */
/* On all machines, switch modem & serial ports off */
for_each_node_by_name(np, "ch-a")

3
arch/powerpc/platforms/powernv/Makefile
View File

@ -1,10 +1,11 @@
obj-y += setup.o opal-wrappers.o opal.o opal-async.o
obj-y += opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o
obj-y += rng.o opal-elog.o opal-dump.o opal-sysparam.o opal-sensor.o
obj-y += opal-msglog.o
obj-y += opal-msglog.o opal-hmi.o
obj-$(CONFIG_SMP) += smp.o subcore.o subcore-asm.o
obj-$(CONFIG_PCI) += pci.o pci-p5ioc2.o pci-ioda.o
obj-$(CONFIG_EEH) += eeh-ioda.o eeh-powernv.o
obj-$(CONFIG_PPC_SCOM) += opal-xscom.o
obj-$(CONFIG_MEMORY_FAILURE) += opal-memory-errors.o
obj-$(CONFIG_TRACEPOINTS) += opal-tracepoints.o

439
arch/powerpc/platforms/powernv/eeh-ioda.c
View File

@ -187,10 +187,10 @@ static int ioda_eeh_post_init(struct pci_controller *hose)
*/
static int ioda_eeh_set_option(struct eeh_pe *pe, int option)
{
s64 ret;
u32 pe_no;
struct pci_controller *hose = pe->phb;
struct pnv_phb *phb = hose->private_data;
int enable, ret = 0;
s64 rc;
/* Check on PE number */
if (pe->addr < 0 || pe->addr >= phb->ioda.total_pe) {
@ -201,58 +201,185 @@ static int ioda_eeh_set_option(struct eeh_pe *pe, int option)
return -EINVAL;
}
pe_no = pe->addr;
switch (option) {
case EEH_OPT_DISABLE:
ret = -EEXIST;
break;
return -EPERM;
case EEH_OPT_ENABLE:
ret = 0;
break;
return 0;
case EEH_OPT_THAW_MMIO:
ret = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no,
OPAL_EEH_ACTION_CLEAR_FREEZE_MMIO);
if (ret) {
pr_warning("%s: Failed to enable MMIO for "
"PHB#%x-PE#%x, err=%lld\n",
__func__, hose->global_number, pe_no, ret);
return -EIO;
}
enable = OPAL_EEH_ACTION_CLEAR_FREEZE_MMIO;
break;
case EEH_OPT_THAW_DMA:
ret = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no,
OPAL_EEH_ACTION_CLEAR_FREEZE_DMA);
if (ret) {
pr_warning("%s: Failed to enable DMA for "
"PHB#%x-PE#%x, err=%lld\n",
__func__, hose->global_number, pe_no, ret);
return -EIO;
}
enable = OPAL_EEH_ACTION_CLEAR_FREEZE_DMA;
break;
default:
pr_warning("%s: Invalid option %d\n", __func__, option);
pr_warn("%s: Invalid option %d\n",
__func__, option);
return -EINVAL;
}
/* If PHB supports compound PE, to handle it */
if (phb->unfreeze_pe) {
ret = phb->unfreeze_pe(phb, pe->addr, enable);
} else {
rc = opal_pci_eeh_freeze_clear(phb->opal_id,
pe->addr,
enable);
if (rc != OPAL_SUCCESS) {
pr_warn("%s: Failure %lld enable %d for PHB#%x-PE#%x\n",
__func__, rc, option, phb->hose->global_number,
pe->addr);
ret = -EIO;
}
}
return ret;
}
static void ioda_eeh_phb_diag(struct pci_controller *hose)
static void ioda_eeh_phb_diag(struct eeh_pe *pe)
{
struct pnv_phb *phb = hose->private_data;
struct pnv_phb *phb = pe->phb->private_data;
long rc;
rc = opal_pci_get_phb_diag_data2(phb->opal_id, phb->diag.blob,
rc = opal_pci_get_phb_diag_data2(phb->opal_id, pe->data,
PNV_PCI_DIAG_BUF_SIZE);
if (rc != OPAL_SUCCESS)
pr_warn("%s: Failed to get diag-data for PHB#%x (%ld)\n",
__func__, pe->phb->global_number, rc);
}
static int ioda_eeh_get_phb_state(struct eeh_pe *pe)
{
struct pnv_phb *phb = pe->phb->private_data;
u8 fstate;
__be16 pcierr;
s64 rc;
int result = 0;
rc = opal_pci_eeh_freeze_status(phb->opal_id,
pe->addr,
&fstate,
&pcierr,
NULL);
if (rc != OPAL_SUCCESS) {
pr_warning("%s: Failed to get diag-data for PHB#%x (%ld)\n",
__func__, hose->global_number, rc);
return;
pr_warn("%s: Failure %lld getting PHB#%x state\n",
__func__, rc, phb->hose->global_number);
return EEH_STATE_NOT_SUPPORT;
}
pnv_pci_dump_phb_diag_data(hose, phb->diag.blob);
/*
* Check PHB state. If the PHB is frozen for the
* first time, to dump the PHB diag-data.
*/
if (be16_to_cpu(pcierr) != OPAL_EEH_PHB_ERROR) {
result = (EEH_STATE_MMIO_ACTIVE |
EEH_STATE_DMA_ACTIVE |
EEH_STATE_MMIO_ENABLED |
EEH_STATE_DMA_ENABLED);
} else if (!(pe->state & EEH_PE_ISOLATED)) {
eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
ioda_eeh_phb_diag(pe);
}
return result;
}
static int ioda_eeh_get_pe_state(struct eeh_pe *pe)
{
struct pnv_phb *phb = pe->phb->private_data;
u8 fstate;
__be16 pcierr;
s64 rc;
int result;
/*
* We don't clobber hardware frozen state until PE
* reset is completed. In order to keep EEH core
* moving forward, we have to return operational
* state during PE reset.
*/
if (pe->state & EEH_PE_RESET) {
result = (EEH_STATE_MMIO_ACTIVE |
EEH_STATE_DMA_ACTIVE |
EEH_STATE_MMIO_ENABLED |
EEH_STATE_DMA_ENABLED);
return result;
}
/*
* Fetch PE state from hardware. If the PHB
* supports compound PE, let it handle that.
*/
if (phb->get_pe_state) {
fstate = phb->get_pe_state(phb, pe->addr);
} else {
rc = opal_pci_eeh_freeze_status(phb->opal_id,
pe->addr,
&fstate,
&pcierr,
NULL);
if (rc != OPAL_SUCCESS) {
pr_warn("%s: Failure %lld getting PHB#%x-PE%x state\n",
__func__, rc, phb->hose->global_number, pe->addr);
return EEH_STATE_NOT_SUPPORT;
}
}
/* Figure out state */
switch (fstate) {
case OPAL_EEH_STOPPED_NOT_FROZEN:
result = (EEH_STATE_MMIO_ACTIVE |
EEH_STATE_DMA_ACTIVE |
EEH_STATE_MMIO_ENABLED |
EEH_STATE_DMA_ENABLED);
break;
case OPAL_EEH_STOPPED_MMIO_FREEZE:
result = (EEH_STATE_DMA_ACTIVE |
EEH_STATE_DMA_ENABLED);
break;
case OPAL_EEH_STOPPED_DMA_FREEZE:
result = (EEH_STATE_MMIO_ACTIVE |
EEH_STATE_MMIO_ENABLED);
break;
case OPAL_EEH_STOPPED_MMIO_DMA_FREEZE:
result = 0;
break;
case OPAL_EEH_STOPPED_RESET:
result = EEH_STATE_RESET_ACTIVE;
break;
case OPAL_EEH_STOPPED_TEMP_UNAVAIL:
result = EEH_STATE_UNAVAILABLE;
break;
case OPAL_EEH_STOPPED_PERM_UNAVAIL:
result = EEH_STATE_NOT_SUPPORT;
break;
default:
result = EEH_STATE_NOT_SUPPORT;
pr_warn("%s: Invalid PHB#%x-PE#%x state %x\n",
__func__, phb->hose->global_number,
pe->addr, fstate);
}
/*
* If PHB supports compound PE, to freeze all
* slave PEs for consistency.
*
* If the PE is switching to frozen state for the
* first time, to dump the PHB diag-data.
*/
if (!(result & EEH_STATE_NOT_SUPPORT) &&
!(result & EEH_STATE_UNAVAILABLE) &&
!(result & EEH_STATE_MMIO_ACTIVE) &&
!(result & EEH_STATE_DMA_ACTIVE) &&
!(pe->state & EEH_PE_ISOLATED)) {
if (phb->freeze_pe)
phb->freeze_pe(phb, pe->addr);
eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
ioda_eeh_phb_diag(pe);
}
return result;
}
/**
@ -265,118 +392,21 @@ static void ioda_eeh_phb_diag(struct pci_controller *hose)
*/
static int ioda_eeh_get_state(struct eeh_pe *pe)
{
s64 ret = 0;
u8 fstate;
__be16 pcierr;
u32 pe_no;
int result;
struct pci_controller *hose = pe->phb;
struct pnv_phb *phb = hose->private_data;
struct pnv_phb *phb = pe->phb->private_data;
/*
* Sanity check on PE address. The PHB PE address should
* be zero.
*/
if (pe->addr < 0 || pe->addr >= phb->ioda.total_pe) {
pr_err("%s: PE address %x out of range [0, %x] "
"on PHB#%x\n",
__func__, pe->addr, phb->ioda.total_pe,
hose->global_number);
/* Sanity check on PE number. PHB PE should have 0 */
if (pe->addr < 0 ||
pe->addr >= phb->ioda.total_pe) {
pr_warn("%s: PHB#%x-PE#%x out of range [0, %x]\n",
__func__, phb->hose->global_number,
pe->addr, phb->ioda.total_pe);
return EEH_STATE_NOT_SUPPORT;
}
/*
* If we're in middle of PE reset, return normal
* state to keep EEH core going. For PHB reset, we
* still expect to have fenced PHB cleared with
* PHB reset.
*/
if (!(pe->type & EEH_PE_PHB) &&
(pe->state & EEH_PE_RESET)) {
result = (EEH_STATE_MMIO_ACTIVE |
EEH_STATE_DMA_ACTIVE |
EEH_STATE_MMIO_ENABLED |
EEH_STATE_DMA_ENABLED);
return result;
}
if (pe->type & EEH_PE_PHB)
return ioda_eeh_get_phb_state(pe);
/* Retrieve PE status through OPAL */
pe_no = pe->addr;
ret = opal_pci_eeh_freeze_status(phb->opal_id, pe_no,
&fstate, &pcierr, NULL);
if (ret) {
pr_err("%s: Failed to get EEH status on "
"PHB#%x-PE#%x\n, err=%lld\n",
__func__, hose->global_number, pe_no, ret);
return EEH_STATE_NOT_SUPPORT;
}
/* Check PHB status */
if (pe->type & EEH_PE_PHB) {
result = 0;
result &= ~EEH_STATE_RESET_ACTIVE;
if (be16_to_cpu(pcierr) != OPAL_EEH_PHB_ERROR) {
result |= EEH_STATE_MMIO_ACTIVE;
result |= EEH_STATE_DMA_ACTIVE;
result |= EEH_STATE_MMIO_ENABLED;
result |= EEH_STATE_DMA_ENABLED;
} else if (!(pe->state & EEH_PE_ISOLATED)) {
eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
ioda_eeh_phb_diag(hose);
}
return result;
}
/* Parse result out */
result = 0;
switch (fstate) {
case OPAL_EEH_STOPPED_NOT_FROZEN:
result &= ~EEH_STATE_RESET_ACTIVE;
result |= EEH_STATE_MMIO_ACTIVE;
result |= EEH_STATE_DMA_ACTIVE;
result |= EEH_STATE_MMIO_ENABLED;
result |= EEH_STATE_DMA_ENABLED;
break;
case OPAL_EEH_STOPPED_MMIO_FREEZE:
result &= ~EEH_STATE_RESET_ACTIVE;
result |= EEH_STATE_DMA_ACTIVE;
result |= EEH_STATE_DMA_ENABLED;
break;
case OPAL_EEH_STOPPED_DMA_FREEZE:
result &= ~EEH_STATE_RESET_ACTIVE;
result |= EEH_STATE_MMIO_ACTIVE;
result |= EEH_STATE_MMIO_ENABLED;
break;
case OPAL_EEH_STOPPED_MMIO_DMA_FREEZE:
result &= ~EEH_STATE_RESET_ACTIVE;
break;
case OPAL_EEH_STOPPED_RESET:
result |= EEH_STATE_RESET_ACTIVE;
break;
case OPAL_EEH_STOPPED_TEMP_UNAVAIL:
result |= EEH_STATE_UNAVAILABLE;
break;
case OPAL_EEH_STOPPED_PERM_UNAVAIL:
result |= EEH_STATE_NOT_SUPPORT;
break;
default:
pr_warning("%s: Unexpected EEH status 0x%x "
"on PHB#%x-PE#%x\n",
__func__, fstate, hose->global_number, pe_no);
}
/* Dump PHB diag-data for frozen PE */
if (result != EEH_STATE_NOT_SUPPORT &&
(result & (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE)) !=
(EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE) &&
!(pe->state & EEH_PE_ISOLATED)) {
eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
ioda_eeh_phb_diag(hose);
}
return result;
return ioda_eeh_get_pe_state(pe);
}
static s64 ioda_eeh_phb_poll(struct pnv_phb *phb)
@ -588,6 +618,24 @@ static int ioda_eeh_reset(struct eeh_pe *pe, int option)
return ret;
}
/**
* ioda_eeh_get_log - Retrieve error log
* @pe: frozen PE
* @severity: permanent or temporary error
* @drv_log: device driver log
* @len: length of device driver log
*
* Retrieve error log, which contains log from device driver
* and firmware.
*/
int ioda_eeh_get_log(struct eeh_pe *pe, int severity,
char *drv_log, unsigned long len)
{
pnv_pci_dump_phb_diag_data(pe->phb, pe->data);
return 0;
}
/**
* ioda_eeh_configure_bridge - Configure the PCI bridges for the indicated PE
* @pe: EEH PE
@ -605,18 +653,24 @@ static int ioda_eeh_configure_bridge(struct eeh_pe *pe)
static void ioda_eeh_hub_diag_common(struct OpalIoP7IOCErrorData *data)
{
/* GEM */
pr_info(" GEM XFIR: %016llx\n", data->gemXfir);
pr_info(" GEM RFIR: %016llx\n", data->gemRfir);
pr_info(" GEM RIRQFIR: %016llx\n", data->gemRirqfir);
pr_info(" GEM Mask: %016llx\n", data->gemMask);
pr_info(" GEM RWOF: %016llx\n", data->gemRwof);
if (data->gemXfir || data->gemRfir ||
data->gemRirqfir || data->gemMask || data->gemRwof)
pr_info(" GEM: %016llx %016llx %016llx %016llx %016llx\n",
be64_to_cpu(data->gemXfir),
be64_to_cpu(data->gemRfir),
be64_to_cpu(data->gemRirqfir),
be64_to_cpu(data->gemMask),
be64_to_cpu(data->gemRwof));
/* LEM */
pr_info(" LEM FIR: %016llx\n", data->lemFir);
pr_info(" LEM Error Mask: %016llx\n", data->lemErrMask);
pr_info(" LEM Action 0: %016llx\n", data->lemAction0);
pr_info(" LEM Action 1: %016llx\n", data->lemAction1);
pr_info(" LEM WOF: %016llx\n", data->lemWof);
if (data->lemFir || data->lemErrMask ||
data->lemAction0 || data->lemAction1 || data->lemWof)
pr_info(" LEM: %016llx %016llx %016llx %016llx %016llx\n",
be64_to_cpu(data->lemFir),
be64_to_cpu(data->lemErrMask),
be64_to_cpu(data->lemAction0),
be64_to_cpu(data->lemAction1),
be64_to_cpu(data->lemWof));
}
static void ioda_eeh_hub_diag(struct pci_controller *hose)
@ -627,8 +681,8 @@ static void ioda_eeh_hub_diag(struct pci_controller *hose)
rc = opal_pci_get_hub_diag_data(phb->hub_id, data, sizeof(*data));
if (rc != OPAL_SUCCESS) {
pr_warning("%s: Failed to get HUB#%llx diag-data (%ld)\n",
__func__, phb->hub_id, rc);
pr_warn("%s: Failed to get HUB#%llx diag-data (%ld)\n",
__func__, phb->hub_id, rc);
return;
}
@ -636,24 +690,31 @@ static void ioda_eeh_hub_diag(struct pci_controller *hose)
case OPAL_P7IOC_DIAG_TYPE_RGC:
pr_info("P7IOC diag-data for RGC\n\n");
ioda_eeh_hub_diag_common(data);
pr_info(" RGC Status: %016llx\n", data->rgc.rgcStatus);
pr_info(" RGC LDCP: %016llx\n", data->rgc.rgcLdcp);
if (data->rgc.rgcStatus || data->rgc.rgcLdcp)
pr_info(" RGC: %016llx %016llx\n",
be64_to_cpu(data->rgc.rgcStatus),
be64_to_cpu(data->rgc.rgcLdcp));
break;
case OPAL_P7IOC_DIAG_TYPE_BI:
pr_info("P7IOC diag-data for BI %s\n\n",
data->bi.biDownbound ? "Downbound" : "Upbound");
ioda_eeh_hub_diag_common(data);
pr_info(" BI LDCP 0: %016llx\n", data->bi.biLdcp0);
pr_info(" BI LDCP 1: %016llx\n", data->bi.biLdcp1);
pr_info(" BI LDCP 2: %016llx\n", data->bi.biLdcp2);
pr_info(" BI Fence Status: %016llx\n", data->bi.biFenceStatus);
if (data->bi.biLdcp0 || data->bi.biLdcp1 ||
data->bi.biLdcp2 || data->bi.biFenceStatus)
pr_info(" BI: %016llx %016llx %016llx %016llx\n",
be64_to_cpu(data->bi.biLdcp0),
be64_to_cpu(data->bi.biLdcp1),
be64_to_cpu(data->bi.biLdcp2),
be64_to_cpu(data->bi.biFenceStatus));
break;
case OPAL_P7IOC_DIAG_TYPE_CI:
pr_info("P7IOC diag-data for CI Port %d\\nn",
pr_info("P7IOC diag-data for CI Port %d\n\n",
data->ci.ciPort);
ioda_eeh_hub_diag_common(data);
pr_info(" CI Port Status: %016llx\n", data->ci.ciPortStatus);
pr_info(" CI Port LDCP: %016llx\n", data->ci.ciPortLdcp);
if (data->ci.ciPortStatus || data->ci.ciPortLdcp)
pr_info(" CI: %016llx %016llx\n",
be64_to_cpu(data->ci.ciPortStatus),
be64_to_cpu(data->ci.ciPortLdcp));
break;
case OPAL_P7IOC_DIAG_TYPE_MISC:
pr_info("P7IOC diag-data for MISC\n\n");
@ -664,30 +725,51 @@ static void ioda_eeh_hub_diag(struct pci_controller *hose)
ioda_eeh_hub_diag_common(data);
break;
default:
pr_warning("%s: Invalid type of HUB#%llx diag-data (%d)\n",
__func__, phb->hub_id, data->type);
pr_warn("%s: Invalid type of HUB#%llx diag-data (%d)\n",
__func__, phb->hub_id, data->type);
}
}
static int ioda_eeh_get_pe(struct pci_controller *hose,
u16 pe_no, struct eeh_pe **pe)
{
struct eeh_pe *phb_pe, *dev_pe;
struct eeh_dev dev;
struct pnv_phb *phb = hose->private_data;
struct pnv_ioda_pe *pnv_pe;
struct eeh_pe *dev_pe;
struct eeh_dev edev;
/* Find the PHB PE */
phb_pe = eeh_phb_pe_get(hose);
if (!phb_pe)
return -EEXIST;
/*
* If PHB supports compound PE, to fetch
* the master PE because slave PE is invisible
* to EEH core.
*/
if (phb->get_pe_state) {
pnv_pe = &phb->ioda.pe_array[pe_no];
if (pnv_pe->flags & PNV_IODA_PE_SLAVE) {
pnv_pe = pnv_pe->master;
WARN_ON(!pnv_pe ||
!(pnv_pe->flags & PNV_IODA_PE_MASTER));
pe_no = pnv_pe->pe_number;
}
}
/* Find the PE according to PE# */
memset(&dev, 0, sizeof(struct eeh_dev));
dev.phb = hose;
dev.pe_config_addr = pe_no;
dev_pe = eeh_pe_get(&dev);
if (!dev_pe) return -EEXIST;
memset(&edev, 0, sizeof(struct eeh_dev));
edev.phb = hose;
edev.pe_config_addr = pe_no;
dev_pe = eeh_pe_get(&edev);
if (!dev_pe)
return -EEXIST;
/*
* At this point, we're sure the compound PE should
* be put into frozen state.
*/
*pe = dev_pe;
if (phb->freeze_pe &&
!(dev_pe->state & EEH_PE_ISOLATED))
phb->freeze_pe(phb, pe_no);
return 0;
}
@ -792,7 +874,8 @@ static int ioda_eeh_next_error(struct eeh_pe **pe)
"detected, location: %s\n",
hose->global_number,
eeh_pe_loc_get(phb_pe));
ioda_eeh_phb_diag(hose);
ioda_eeh_phb_diag(phb_pe);
pnv_pci_dump_phb_diag_data(hose, phb_pe->data);
ret = EEH_NEXT_ERR_NONE;
}
@ -812,7 +895,8 @@ static int ioda_eeh_next_error(struct eeh_pe **pe)
opal_pci_eeh_freeze_clear(phb->opal_id, frozen_pe_no,
OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
ret = EEH_NEXT_ERR_NONE;
} else if ((*pe)->state & EEH_PE_ISOLATED) {
} else if ((*pe)->state & EEH_PE_ISOLATED ||
eeh_pe_passed(*pe)) {
ret = EEH_NEXT_ERR_NONE;
} else {
pr_err("EEH: Frozen PE#%x on PHB#%x detected\n",
@ -839,7 +923,7 @@ static int ioda_eeh_next_error(struct eeh_pe **pe)
ret == EEH_NEXT_ERR_FENCED_PHB) &&
!((*pe)->state & EEH_PE_ISOLATED)) {
eeh_pe_state_mark(*pe, EEH_PE_ISOLATED);
ioda_eeh_phb_diag(hose);
ioda_eeh_phb_diag(*pe);
}
/*
@ -885,6 +969,7 @@ struct pnv_eeh_ops ioda_eeh_ops = {
.set_option = ioda_eeh_set_option,
.get_state = ioda_eeh_get_state,
.reset = ioda_eeh_reset,
.get_log = ioda_eeh_get_log,
.configure_bridge = ioda_eeh_configure_bridge,
.next_error = ioda_eeh_next_error
};

Some files were not shown because too many files have changed in this diff Show More