mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-24 10:28:57 +00:00
[media] af9013: rewrite whole driver
Rewrite whole af9013 demod driver in order to decrease I2C I/O. We need to decrease I2C load since AF9015 (I2C adapter / USB-bridge used) seems to have some problems under heavy I2C traffic. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This commit is contained in:
Antti Palosaari
Mauro Carvalho Chehab
parent
e90ab840fb
commit
f571e004c3
@ -50,14 +50,14 @@ static int af9015_properties_count = ARRAY_SIZE(af9015_properties);
|
||||
|
||||
static struct af9013_config af9015_af9013_config[] = {
|
||||
{
|
||||
.demod_address = AF9015_I2C_DEMOD,
|
||||
.output_mode = AF9013_OUTPUT_MODE_USB,
|
||||
.i2c_addr = AF9015_I2C_DEMOD,
|
||||
.ts_mode = AF9013_TS_USB,
|
||||
.api_version = { 0, 1, 9, 0 },
|
||||
.gpio[0] = AF9013_GPIO_HI,
|
||||
.gpio[3] = AF9013_GPIO_TUNER_ON,
|
||||
|
||||
}, {
|
||||
.output_mode = AF9013_OUTPUT_MODE_SERIAL,
|
||||
.ts_mode = AF9013_TS_SERIAL,
|
||||
.api_version = { 0, 1, 9, 0 },
|
||||
.gpio[0] = AF9013_GPIO_TUNER_ON,
|
||||
.gpio[1] = AF9013_GPIO_LO,
|
||||
@ -216,8 +216,8 @@ static int af9015_write_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg,
|
||||
{
|
||||
struct req_t req = {WRITE_I2C, addr, reg, 1, 1, 1, &val};
|
||||
|
||||
if (addr == af9015_af9013_config[0].demod_address ||
|
||||
addr == af9015_af9013_config[1].demod_address)
|
||||
if (addr == af9015_af9013_config[0].i2c_addr ||
|
||||
addr == af9015_af9013_config[1].i2c_addr)
|
||||
req.addr_len = 3;
|
||||
|
||||
return af9015_ctrl_msg(d, &req);
|
||||
@ -228,8 +228,8 @@ static int af9015_read_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg,
|
||||
{
|
||||
struct req_t req = {READ_I2C, addr, reg, 0, 1, 1, val};
|
||||
|
||||
if (addr == af9015_af9013_config[0].demod_address ||
|
||||
addr == af9015_af9013_config[1].demod_address)
|
||||
if (addr == af9015_af9013_config[0].i2c_addr ||
|
||||
addr == af9015_af9013_config[1].i2c_addr)
|
||||
req.addr_len = 3;
|
||||
|
||||
return af9015_ctrl_msg(d, &req);
|
||||
@ -271,8 +271,8 @@ Due to that the only way to select correct tuner is use demodulator I2C-gate.
|
||||
return -EAGAIN;
|
||||
|
||||
while (i < num) {
|
||||
if (msg[i].addr == af9015_af9013_config[0].demod_address ||
|
||||
msg[i].addr == af9015_af9013_config[1].demod_address) {
|
||||
if (msg[i].addr == af9015_af9013_config[0].i2c_addr ||
|
||||
msg[i].addr == af9015_af9013_config[1].i2c_addr) {
|
||||
addr = msg[i].buf[0] << 8;
|
||||
addr += msg[i].buf[1];
|
||||
mbox = msg[i].buf[2];
|
||||
@ -288,8 +288,7 @@ Due to that the only way to select correct tuner is use demodulator I2C-gate.
|
||||
ret = -EOPNOTSUPP;
|
||||
goto error;
|
||||
}
|
||||
if (msg[i].addr ==
|
||||
af9015_af9013_config[0].demod_address)
|
||||
if (msg[i].addr == af9015_af9013_config[0].i2c_addr)
|
||||
req.cmd = READ_MEMORY;
|
||||
else
|
||||
req.cmd = READ_I2C;
|
||||
@ -307,7 +306,7 @@ Due to that the only way to select correct tuner is use demodulator I2C-gate.
|
||||
goto error;
|
||||
}
|
||||
if (msg[i].addr ==
|
||||
af9015_af9013_config[0].demod_address) {
|
||||
af9015_af9013_config[0].i2c_addr) {
|
||||
ret = -EINVAL;
|
||||
goto error;
|
||||
}
|
||||
@ -325,8 +324,7 @@ Due to that the only way to select correct tuner is use demodulator I2C-gate.
|
||||
ret = -EOPNOTSUPP;
|
||||
goto error;
|
||||
}
|
||||
if (msg[i].addr ==
|
||||
af9015_af9013_config[0].demod_address)
|
||||
if (msg[i].addr == af9015_af9013_config[0].i2c_addr)
|
||||
req.cmd = WRITE_MEMORY;
|
||||
else
|
||||
req.cmd = WRITE_I2C;
|
||||
@ -508,7 +506,7 @@ static int af9015_copy_firmware(struct dvb_usb_device *d)
|
||||
msleep(100);
|
||||
|
||||
ret = af9015_read_reg_i2c(d,
|
||||
af9015_af9013_config[1].demod_address, 0x98be, &val);
|
||||
af9015_af9013_config[1].i2c_addr, 0x98be, &val);
|
||||
if (ret)
|
||||
goto error;
|
||||
else
|
||||
@ -536,7 +534,7 @@ static int af9015_copy_firmware(struct dvb_usb_device *d)
|
||||
goto error;
|
||||
|
||||
/* request boot firmware */
|
||||
ret = af9015_write_reg_i2c(d, af9015_af9013_config[1].demod_address,
|
||||
ret = af9015_write_reg_i2c(d, af9015_af9013_config[1].i2c_addr,
|
||||
0xe205, 1);
|
||||
deb_info("%s: firmware boot cmd status:%d\n", __func__, ret);
|
||||
if (ret)
|
||||
@ -547,7 +545,7 @@ static int af9015_copy_firmware(struct dvb_usb_device *d)
|
||||
|
||||
/* check firmware status */
|
||||
ret = af9015_read_reg_i2c(d,
|
||||
af9015_af9013_config[1].demod_address, 0x98be, &val);
|
||||
af9015_af9013_config[1].i2c_addr, 0x98be, &val);
|
||||
deb_info("%s: firmware status cmd status:%d fw status:%02x\n",
|
||||
__func__, ret, val);
|
||||
if (ret)
|
||||
@ -840,7 +838,7 @@ static int af9015_read_config(struct usb_device *udev)
|
||||
if (ret)
|
||||
goto error;
|
||||
|
||||
deb_info("%s: IR mode:%d\n", __func__, val);
|
||||
deb_info("%s: IR mode=%d\n", __func__, val);
|
||||
for (i = 0; i < af9015_properties_count; i++) {
|
||||
if (val == AF9015_IR_MODE_DISABLED)
|
||||
af9015_properties[i].rc.core.rc_codes = NULL;
|
||||
@ -854,7 +852,7 @@ static int af9015_read_config(struct usb_device *udev)
|
||||
if (ret)
|
||||
goto error;
|
||||
af9015_config.dual_mode = val;
|
||||
deb_info("%s: TS mode:%d\n", __func__, af9015_config.dual_mode);
|
||||
deb_info("%s: TS mode=%d\n", __func__, af9015_config.dual_mode);
|
||||
|
||||
/* Set adapter0 buffer size according to USB port speed, adapter1 buffer
|
||||
size can be static because it is enabled only USB2.0 */
|
||||
@ -878,7 +876,7 @@ static int af9015_read_config(struct usb_device *udev)
|
||||
ret = af9015_rw_udev(udev, &req);
|
||||
if (ret)
|
||||
goto error;
|
||||
af9015_af9013_config[1].demod_address = val;
|
||||
af9015_af9013_config[1].i2c_addr = val;
|
||||
|
||||
/* enable 2nd adapter */
|
||||
for (i = 0; i < af9015_properties_count; i++)
|
||||
@ -900,34 +898,38 @@ static int af9015_read_config(struct usb_device *udev)
|
||||
goto error;
|
||||
switch (val) {
|
||||
case 0:
|
||||
af9015_af9013_config[i].adc_clock = 28800;
|
||||
af9015_af9013_config[i].clock = 28800000;
|
||||
break;
|
||||
case 1:
|
||||
af9015_af9013_config[i].adc_clock = 20480;
|
||||
af9015_af9013_config[i].clock = 20480000;
|
||||
break;
|
||||
case 2:
|
||||
af9015_af9013_config[i].adc_clock = 28000;
|
||||
af9015_af9013_config[i].clock = 28000000;
|
||||
break;
|
||||
case 3:
|
||||
af9015_af9013_config[i].adc_clock = 25000;
|
||||
af9015_af9013_config[i].clock = 25000000;
|
||||
break;
|
||||
};
|
||||
deb_info("%s: [%d] xtal:%d set adc_clock:%d\n", __func__, i,
|
||||
val, af9015_af9013_config[i].adc_clock);
|
||||
deb_info("%s: [%d] xtal=%d set clock=%d\n", __func__, i,
|
||||
val, af9015_af9013_config[i].clock);
|
||||
|
||||
/* tuner IF */
|
||||
/* IF frequency */
|
||||
req.addr = AF9015_EEPROM_IF1H + offset;
|
||||
ret = af9015_rw_udev(udev, &req);
|
||||
if (ret)
|
||||
goto error;
|
||||
af9015_af9013_config[i].tuner_if = val << 8;
|
||||
|
||||
af9015_af9013_config[i].if_frequency = val << 8;
|
||||
|
||||
req.addr = AF9015_EEPROM_IF1L + offset;
|
||||
ret = af9015_rw_udev(udev, &req);
|
||||
if (ret)
|
||||
goto error;
|
||||
af9015_af9013_config[i].tuner_if += val;
|
||||
deb_info("%s: [%d] IF1:%d\n", __func__, i,
|
||||
af9015_af9013_config[0].tuner_if);
|
||||
|
||||
af9015_af9013_config[i].if_frequency += val;
|
||||
af9015_af9013_config[i].if_frequency *= 1000;
|
||||
deb_info("%s: [%d] IF frequency=%d\n", __func__, i,
|
||||
af9015_af9013_config[0].if_frequency);
|
||||
|
||||
/* MT2060 IF1 */
|
||||
req.addr = AF9015_EEPROM_MT2060_IF1H + offset;
|
||||
@ -940,7 +942,7 @@ static int af9015_read_config(struct usb_device *udev)
|
||||
if (ret)
|
||||
goto error;
|
||||
af9015_config.mt2060_if1[i] += val;
|
||||
deb_info("%s: [%d] MT2060 IF1:%d\n", __func__, i,
|
||||
deb_info("%s: [%d] MT2060 IF1=%d\n", __func__, i,
|
||||
af9015_config.mt2060_if1[i]);
|
||||
|
||||
/* tuner */
|
||||
@ -957,30 +959,30 @@ static int af9015_read_config(struct usb_device *udev)
|
||||
case AF9013_TUNER_TDA18271:
|
||||
case AF9013_TUNER_QT1010A:
|
||||
case AF9013_TUNER_TDA18218:
|
||||
af9015_af9013_config[i].rf_spec_inv = 1;
|
||||
af9015_af9013_config[i].spec_inv = 1;
|
||||
break;
|
||||
case AF9013_TUNER_MXL5003D:
|
||||
case AF9013_TUNER_MXL5005D:
|
||||
case AF9013_TUNER_MXL5005R:
|
||||
case AF9013_TUNER_MXL5007T:
|
||||
af9015_af9013_config[i].rf_spec_inv = 0;
|
||||
af9015_af9013_config[i].spec_inv = 0;
|
||||
break;
|
||||
case AF9013_TUNER_MC44S803:
|
||||
af9015_af9013_config[i].gpio[1] = AF9013_GPIO_LO;
|
||||
af9015_af9013_config[i].rf_spec_inv = 1;
|
||||
af9015_af9013_config[i].spec_inv = 1;
|
||||
break;
|
||||
default:
|
||||
warn("tuner id:%d not supported, please report!", val);
|
||||
warn("tuner id=%d not supported, please report!", val);
|
||||
return -ENODEV;
|
||||
};
|
||||
|
||||
af9015_af9013_config[i].tuner = val;
|
||||
deb_info("%s: [%d] tuner id:%d\n", __func__, i, val);
|
||||
deb_info("%s: [%d] tuner id=%d\n", __func__, i, val);
|
||||
}
|
||||
|
||||
error:
|
||||
if (ret)
|
||||
err("eeprom read failed:%d", ret);
|
||||
err("eeprom read failed=%d", ret);
|
||||
|
||||
/* AverMedia AVerTV Volar Black HD (A850) device have bad EEPROM
|
||||
content :-( Override some wrong values here. Ditto for the
|
||||
@ -998,7 +1000,7 @@ error:
|
||||
af9015_properties[i].num_adapters = 1;
|
||||
|
||||
/* set correct IF */
|
||||
af9015_af9013_config[0].tuner_if = 4570;
|
||||
af9015_af9013_config[0].if_frequency = 4570000;
|
||||
}
|
||||
|
||||
return ret;
|
||||
@ -1156,7 +1158,7 @@ static int af9015_af9013_sleep(struct dvb_frontend *fe)
|
||||
if (mutex_lock_interruptible(&adap->dev->usb_mutex))
|
||||
return -EAGAIN;
|
||||
|
||||
ret = priv->init[adap->id](fe);
|
||||
ret = priv->sleep[adap->id](fe);
|
||||
|
||||
mutex_unlock(&adap->dev->usb_mutex);
|
||||
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@ -2,6 +2,7 @@
|
||||
* Afatech AF9013 demodulator driver
|
||||
*
|
||||
* Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
|
||||
* Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
|
||||
*
|
||||
* Thanks to Afatech who kindly provided information.
|
||||
*
|
||||
@ -21,33 +22,11 @@
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef _AF9013_H_
|
||||
#define _AF9013_H_
|
||||
#ifndef AF9013_H
|
||||
#define AF9013_H
|
||||
|
||||
#include <linux/dvb/frontend.h>
|
||||
|
||||
enum af9013_ts_mode {
|
||||
AF9013_OUTPUT_MODE_PARALLEL,
|
||||
AF9013_OUTPUT_MODE_SERIAL,
|
||||
AF9013_OUTPUT_MODE_USB, /* only for AF9015 */
|
||||
};
|
||||
|
||||
enum af9013_tuner {
|
||||
AF9013_TUNER_MXL5003D = 3, /* MaxLinear */
|
||||
AF9013_TUNER_MXL5005D = 13, /* MaxLinear */
|
||||
AF9013_TUNER_MXL5005R = 30, /* MaxLinear */
|
||||
AF9013_TUNER_ENV77H11D5 = 129, /* Panasonic */
|
||||
AF9013_TUNER_MT2060 = 130, /* Microtune */
|
||||
AF9013_TUNER_MC44S803 = 133, /* Freescale */
|
||||
AF9013_TUNER_QT1010 = 134, /* Quantek */
|
||||
AF9013_TUNER_UNKNOWN = 140, /* for can tuners ? */
|
||||
AF9013_TUNER_MT2060_2 = 147, /* Microtune */
|
||||
AF9013_TUNER_TDA18271 = 156, /* NXP */
|
||||
AF9013_TUNER_QT1010A = 162, /* Quantek */
|
||||
AF9013_TUNER_MXL5007T = 177, /* MaxLinear */
|
||||
AF9013_TUNER_TDA18218 = 179, /* NXP */
|
||||
};
|
||||
|
||||
/* AF9013/5 GPIOs (mostly guessed)
|
||||
demod#1-gpio#0 - set demod#2 i2c-addr for dual devices
|
||||
demod#1-gpio#1 - xtal setting (?)
|
||||
@ -55,44 +34,74 @@ enum af9013_tuner {
|
||||
demod#2-gpio#0 - tuner#2
|
||||
demod#2-gpio#1 - xtal setting (?)
|
||||
*/
|
||||
|
||||
struct af9013_config {
|
||||
/*
|
||||
* I2C address
|
||||
*/
|
||||
u8 i2c_addr;
|
||||
|
||||
/*
|
||||
* clock
|
||||
* 20480000, 25000000, 28000000, 28800000
|
||||
*/
|
||||
u32 clock;
|
||||
|
||||
/*
|
||||
* tuner
|
||||
*/
|
||||
#define AF9013_TUNER_MXL5003D 3 /* MaxLinear */
|
||||
#define AF9013_TUNER_MXL5005D 13 /* MaxLinear */
|
||||
#define AF9013_TUNER_MXL5005R 30 /* MaxLinear */
|
||||
#define AF9013_TUNER_ENV77H11D5 129 /* Panasonic */
|
||||
#define AF9013_TUNER_MT2060 130 /* Microtune */
|
||||
#define AF9013_TUNER_MC44S803 133 /* Freescale */
|
||||
#define AF9013_TUNER_QT1010 134 /* Quantek */
|
||||
#define AF9013_TUNER_UNKNOWN 140 /* for can tuners ? */
|
||||
#define AF9013_TUNER_MT2060_2 147 /* Microtune */
|
||||
#define AF9013_TUNER_TDA18271 156 /* NXP */
|
||||
#define AF9013_TUNER_QT1010A 162 /* Quantek */
|
||||
#define AF9013_TUNER_MXL5007T 177 /* MaxLinear */
|
||||
#define AF9013_TUNER_TDA18218 179 /* NXP */
|
||||
u8 tuner;
|
||||
|
||||
/*
|
||||
* IF frequency
|
||||
*/
|
||||
u32 if_frequency;
|
||||
|
||||
/*
|
||||
* TS settings
|
||||
*/
|
||||
#define AF9013_TS_USB 0
|
||||
#define AF9013_TS_PARALLEL 1
|
||||
#define AF9013_TS_SERIAL 2
|
||||
u8 ts_mode:2;
|
||||
|
||||
/*
|
||||
* input spectrum inversion
|
||||
*/
|
||||
bool spec_inv;
|
||||
|
||||
/*
|
||||
* firmware API version
|
||||
*/
|
||||
u8 api_version[4];
|
||||
|
||||
/*
|
||||
* GPIOs
|
||||
*/
|
||||
#define AF9013_GPIO_ON (1 << 0)
|
||||
#define AF9013_GPIO_EN (1 << 1)
|
||||
#define AF9013_GPIO_O (1 << 2)
|
||||
#define AF9013_GPIO_I (1 << 3)
|
||||
|
||||
#define AF9013_GPIO_LO (AF9013_GPIO_ON|AF9013_GPIO_EN)
|
||||
#define AF9013_GPIO_HI (AF9013_GPIO_ON|AF9013_GPIO_EN|AF9013_GPIO_O)
|
||||
|
||||
#define AF9013_GPIO_TUNER_ON (AF9013_GPIO_ON|AF9013_GPIO_EN)
|
||||
#define AF9013_GPIO_TUNER_OFF (AF9013_GPIO_ON|AF9013_GPIO_EN|AF9013_GPIO_O)
|
||||
|
||||
struct af9013_config {
|
||||
/* demodulator's I2C address */
|
||||
u8 demod_address;
|
||||
|
||||
/* frequencies in kHz */
|
||||
u32 adc_clock;
|
||||
|
||||
/* tuner ID */
|
||||
u8 tuner;
|
||||
|
||||
/* tuner IF */
|
||||
u16 tuner_if;
|
||||
|
||||
/* TS data output mode */
|
||||
u8 output_mode:2;
|
||||
|
||||
/* RF spectrum inversion */
|
||||
u8 rf_spec_inv:1;
|
||||
|
||||
/* API version */
|
||||
u8 api_version[4];
|
||||
|
||||
/* GPIOs */
|
||||
u8 gpio[4];
|
||||
};
|
||||
|
||||
|
||||
#if defined(CONFIG_DVB_AF9013) || \
|
||||
(defined(CONFIG_DVB_AF9013_MODULE) && defined(MODULE))
|
||||
extern struct dvb_frontend *af9013_attach(const struct af9013_config *config,
|
||||
@ -106,4 +115,4 @@ const struct af9013_config *config, struct i2c_adapter *i2c)
|
||||
}
|
||||
#endif /* CONFIG_DVB_AF9013 */
|
||||
|
||||
#endif /* _AF9013_H_ */
|
||||
#endif /* AF9013_H */
|
||||
|
||||
@ -2,6 +2,7 @@
|
||||
* Afatech AF9013 demodulator driver
|
||||
*
|
||||
* Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
|
||||
* Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
|
||||
*
|
||||
* Thanks to Afatech who kindly provided information.
|
||||
*
|
||||
@ -21,24 +22,19 @@
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef _AF9013_PRIV_
|
||||
#define _AF9013_PRIV_
|
||||
#ifndef AF9013_PRIV_H
|
||||
#define AF9013_PRIV_H
|
||||
|
||||
#include "dvb_frontend.h"
|
||||
#include "af9013.h"
|
||||
#include <linux/firmware.h>
|
||||
|
||||
#define LOG_PREFIX "af9013"
|
||||
extern int af9013_debug;
|
||||
|
||||
#define dprintk(var, level, args...) \
|
||||
do { if ((var & level)) printk(args); } while (0)
|
||||
|
||||
#define debug_dump(b, l, func) {\
|
||||
int loop_; \
|
||||
for (loop_ = 0; loop_ < l; loop_++) \
|
||||
func("%02x ", b[loop_]); \
|
||||
func("\n");\
|
||||
}
|
||||
|
||||
#define deb_info(args...) dprintk(af9013_debug, 0x01, args)
|
||||
|
||||
#undef dbg
|
||||
#define dbg(f, arg...) \
|
||||
if (af9013_debug) \
|
||||
printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg)
|
||||
#undef err
|
||||
#define err(f, arg...) printk(KERN_ERR LOG_PREFIX": " f "\n" , ## arg)
|
||||
#undef info
|
||||
@ -48,70 +44,71 @@ extern int af9013_debug;
|
||||
|
||||
#define AF9013_DEFAULT_FIRMWARE "dvb-fe-af9013.fw"
|
||||
|
||||
struct regdesc {
|
||||
struct af9013_reg_bit {
|
||||
u16 addr;
|
||||
u8 pos:4;
|
||||
u8 len:4;
|
||||
u8 val;
|
||||
};
|
||||
|
||||
struct snr_table {
|
||||
struct af9013_snr {
|
||||
u32 val;
|
||||
u8 snr;
|
||||
};
|
||||
|
||||
struct coeff {
|
||||
u32 adc_clock;
|
||||
fe_bandwidth_t bw;
|
||||
struct af9013_coeff {
|
||||
u32 clock;
|
||||
u32 bandwidth_hz;
|
||||
u8 val[24];
|
||||
};
|
||||
|
||||
/* pre-calculated coeff lookup table */
|
||||
static struct coeff coeff_table[] = {
|
||||
static const struct af9013_coeff coeff_lut[] = {
|
||||
/* 28.800 MHz */
|
||||
{ 28800, BANDWIDTH_8_MHZ, { 0x02, 0x8a, 0x28, 0xa3, 0x05, 0x14,
|
||||
{ 28800000, 8000000, { 0x02, 0x8a, 0x28, 0xa3, 0x05, 0x14,
|
||||
0x51, 0x11, 0x00, 0xa2, 0x8f, 0x3d, 0x00, 0xa2, 0x8a,
|
||||
0x29, 0x00, 0xa2, 0x85, 0x14, 0x01, 0x45, 0x14, 0x14 } },
|
||||
{ 28800, BANDWIDTH_7_MHZ, { 0x02, 0x38, 0xe3, 0x8e, 0x04, 0x71,
|
||||
{ 28800000, 7000000, { 0x02, 0x38, 0xe3, 0x8e, 0x04, 0x71,
|
||||
0xc7, 0x07, 0x00, 0x8e, 0x3d, 0x55, 0x00, 0x8e, 0x38,
|
||||
0xe4, 0x00, 0x8e, 0x34, 0x72, 0x01, 0x1c, 0x71, 0x32 } },
|
||||
{ 28800, BANDWIDTH_6_MHZ, { 0x01, 0xe7, 0x9e, 0x7a, 0x03, 0xcf,
|
||||
{ 28800000, 6000000, { 0x01, 0xe7, 0x9e, 0x7a, 0x03, 0xcf,
|
||||
0x3c, 0x3d, 0x00, 0x79, 0xeb, 0x6e, 0x00, 0x79, 0xe7,
|
||||
0x9e, 0x00, 0x79, 0xe3, 0xcf, 0x00, 0xf3, 0xcf, 0x0f } },
|
||||
/* 20.480 MHz */
|
||||
{ 20480, BANDWIDTH_8_MHZ, { 0x03, 0x92, 0x49, 0x26, 0x07, 0x24,
|
||||
{ 20480000, 8000000, { 0x03, 0x92, 0x49, 0x26, 0x07, 0x24,
|
||||
0x92, 0x13, 0x00, 0xe4, 0x99, 0x6e, 0x00, 0xe4, 0x92,
|
||||
0x49, 0x00, 0xe4, 0x8b, 0x25, 0x01, 0xc9, 0x24, 0x25 } },
|
||||
{ 20480, BANDWIDTH_7_MHZ, { 0x03, 0x20, 0x00, 0x01, 0x06, 0x40,
|
||||
{ 20480000, 7000000, { 0x03, 0x20, 0x00, 0x01, 0x06, 0x40,
|
||||
0x00, 0x00, 0x00, 0xc8, 0x06, 0x40, 0x00, 0xc8, 0x00,
|
||||
0x00, 0x00, 0xc7, 0xf9, 0xc0, 0x01, 0x90, 0x00, 0x00 } },
|
||||
{ 20480, BANDWIDTH_6_MHZ, { 0x02, 0xad, 0xb6, 0xdc, 0x05, 0x5b,
|
||||
{ 20480000, 6000000, { 0x02, 0xad, 0xb6, 0xdc, 0x05, 0x5b,
|
||||
0x6d, 0x2e, 0x00, 0xab, 0x73, 0x13, 0x00, 0xab, 0x6d,
|
||||
0xb7, 0x00, 0xab, 0x68, 0x5c, 0x01, 0x56, 0xdb, 0x1c } },
|
||||
/* 28.000 MHz */
|
||||
{ 28000, BANDWIDTH_8_MHZ, { 0x02, 0x9c, 0xbc, 0x15, 0x05, 0x39,
|
||||
{ 28000000, 8000000, { 0x02, 0x9c, 0xbc, 0x15, 0x05, 0x39,
|
||||
0x78, 0x0a, 0x00, 0xa7, 0x34, 0x3f, 0x00, 0xa7, 0x2f,
|
||||
0x05, 0x00, 0xa7, 0x29, 0xcc, 0x01, 0x4e, 0x5e, 0x03 } },
|
||||
{ 28000, BANDWIDTH_7_MHZ, { 0x02, 0x49, 0x24, 0x92, 0x04, 0x92,
|
||||
{ 28000000, 7000000, { 0x02, 0x49, 0x24, 0x92, 0x04, 0x92,
|
||||
0x49, 0x09, 0x00, 0x92, 0x4d, 0xb7, 0x00, 0x92, 0x49,
|
||||
0x25, 0x00, 0x92, 0x44, 0x92, 0x01, 0x24, 0x92, 0x12 } },
|
||||
{ 28000, BANDWIDTH_6_MHZ, { 0x01, 0xf5, 0x8d, 0x10, 0x03, 0xeb,
|
||||
{ 28000000, 6000000, { 0x01, 0xf5, 0x8d, 0x10, 0x03, 0xeb,
|
||||
0x1a, 0x08, 0x00, 0x7d, 0x67, 0x2f, 0x00, 0x7d, 0x63,
|
||||
0x44, 0x00, 0x7d, 0x5f, 0x59, 0x00, 0xfa, 0xc6, 0x22 } },
|
||||
/* 25.000 MHz */
|
||||
{ 25000, BANDWIDTH_8_MHZ, { 0x02, 0xec, 0xfb, 0x9d, 0x05, 0xd9,
|
||||
{ 25000000, 8000000, { 0x02, 0xec, 0xfb, 0x9d, 0x05, 0xd9,
|
||||
0xf7, 0x0e, 0x00, 0xbb, 0x44, 0xc1, 0x00, 0xbb, 0x3e,
|
||||
0xe7, 0x00, 0xbb, 0x39, 0x0d, 0x01, 0x76, 0x7d, 0x34 } },
|
||||
{ 25000, BANDWIDTH_7_MHZ, { 0x02, 0x8f, 0x5c, 0x29, 0x05, 0x1e,
|
||||
{ 25000000, 7000000, { 0x02, 0x8f, 0x5c, 0x29, 0x05, 0x1e,
|
||||
0xb8, 0x14, 0x00, 0xa3, 0xdc, 0x29, 0x00, 0xa3, 0xd7,
|
||||
0x0a, 0x00, 0xa3, 0xd1, 0xec, 0x01, 0x47, 0xae, 0x05 } },
|
||||
{ 25000, BANDWIDTH_6_MHZ, { 0x02, 0x31, 0xbc, 0xb5, 0x04, 0x63,
|
||||
{ 25000000, 6000000, { 0x02, 0x31, 0xbc, 0xb5, 0x04, 0x63,
|
||||
0x79, 0x1b, 0x00, 0x8c, 0x73, 0x91, 0x00, 0x8c, 0x6f,
|
||||
0x2d, 0x00, 0x8c, 0x6a, 0xca, 0x01, 0x18, 0xde, 0x17 } },
|
||||
};
|
||||
|
||||
/* QPSK SNR lookup table */
|
||||
static struct snr_table qpsk_snr_table[] = {
|
||||
static const struct af9013_snr qpsk_snr_lut[] = {
|
||||
{ 0x000000, 0 },
|
||||
{ 0x0b4771, 0 },
|
||||
{ 0x0c1aed, 1 },
|
||||
{ 0x0d0d27, 2 },
|
||||
@ -131,7 +128,8 @@ static struct snr_table qpsk_snr_table[] = {
|
||||
};
|
||||
|
||||
/* QAM16 SNR lookup table */
|
||||
static struct snr_table qam16_snr_table[] = {
|
||||
static const struct af9013_snr qam16_snr_lut[] = {
|
||||
{ 0x000000, 0 },
|
||||
{ 0x05eb62, 5 },
|
||||
{ 0x05fecf, 6 },
|
||||
{ 0x060b80, 7 },
|
||||
@ -151,7 +149,8 @@ static struct snr_table qam16_snr_table[] = {
|
||||
};
|
||||
|
||||
/* QAM64 SNR lookup table */
|
||||
static struct snr_table qam64_snr_table[] = {
|
||||
static const struct af9013_snr qam64_snr_lut[] = {
|
||||
{ 0x000000, 0 },
|
||||
{ 0x03109b, 12 },
|
||||
{ 0x0310d4, 13 },
|
||||
{ 0x031920, 14 },
|
||||
@ -170,7 +169,7 @@ static struct snr_table qam64_snr_table[] = {
|
||||
{ 0xffffff, 27 },
|
||||
};
|
||||
|
||||
static struct regdesc ofsm_init[] = {
|
||||
static const struct af9013_reg_bit ofsm_init[] = {
|
||||
{ 0xd73a, 0, 8, 0xa1 },
|
||||
{ 0xd73b, 0, 8, 0x1f },
|
||||
{ 0xd73c, 4, 4, 0x0a },
|
||||
@ -252,7 +251,7 @@ static struct regdesc ofsm_init[] = {
|
||||
|
||||
/* Panasonic ENV77H11D5 tuner init
|
||||
AF9013_TUNER_ENV77H11D5 = 129 */
|
||||
static struct regdesc tuner_init_env77h11d5[] = {
|
||||
static const struct af9013_reg_bit tuner_init_env77h11d5[] = {
|
||||
{ 0x9bd5, 0, 8, 0x01 },
|
||||
{ 0x9bd6, 0, 8, 0x03 },
|
||||
{ 0x9bbe, 0, 8, 0x01 },
|
||||
@ -318,7 +317,7 @@ static struct regdesc tuner_init_env77h11d5[] = {
|
||||
|
||||
/* Microtune MT2060 tuner init
|
||||
AF9013_TUNER_MT2060 = 130 */
|
||||
static struct regdesc tuner_init_mt2060[] = {
|
||||
static const struct af9013_reg_bit tuner_init_mt2060[] = {
|
||||
{ 0x9bd5, 0, 8, 0x01 },
|
||||
{ 0x9bd6, 0, 8, 0x07 },
|
||||
{ 0xd1a0, 1, 1, 0x01 },
|
||||
@ -395,7 +394,7 @@ static struct regdesc tuner_init_mt2060[] = {
|
||||
|
||||
/* Microtune MT2060 tuner init
|
||||
AF9013_TUNER_MT2060_2 = 147 */
|
||||
static struct regdesc tuner_init_mt2060_2[] = {
|
||||
static const struct af9013_reg_bit tuner_init_mt2060_2[] = {
|
||||
{ 0x9bd5, 0, 8, 0x01 },
|
||||
{ 0x9bd6, 0, 8, 0x06 },
|
||||
{ 0x9bbe, 0, 8, 0x01 },
|
||||
@ -462,7 +461,7 @@ static struct regdesc tuner_init_mt2060_2[] = {
|
||||
|
||||
/* MaxLinear MXL5003 tuner init
|
||||
AF9013_TUNER_MXL5003D = 3 */
|
||||
static struct regdesc tuner_init_mxl5003d[] = {
|
||||
static const struct af9013_reg_bit tuner_init_mxl5003d[] = {
|
||||
{ 0x9bd5, 0, 8, 0x01 },
|
||||
{ 0x9bd6, 0, 8, 0x09 },
|
||||
{ 0xd1a0, 1, 1, 0x01 },
|
||||
@ -534,7 +533,7 @@ static struct regdesc tuner_init_mxl5003d[] = {
|
||||
AF9013_TUNER_MXL5005D = 13
|
||||
AF9013_TUNER_MXL5005R = 30
|
||||
AF9013_TUNER_MXL5007T = 177 */
|
||||
static struct regdesc tuner_init_mxl5005[] = {
|
||||
static const struct af9013_reg_bit tuner_init_mxl5005[] = {
|
||||
{ 0x9bd5, 0, 8, 0x01 },
|
||||
{ 0x9bd6, 0, 8, 0x07 },
|
||||
{ 0xd1a0, 1, 1, 0x01 },
|
||||
@ -613,7 +612,7 @@ static struct regdesc tuner_init_mxl5005[] = {
|
||||
/* Quantek QT1010 tuner init
|
||||
AF9013_TUNER_QT1010 = 134
|
||||
AF9013_TUNER_QT1010A = 162 */
|
||||
static struct regdesc tuner_init_qt1010[] = {
|
||||
static const struct af9013_reg_bit tuner_init_qt1010[] = {
|
||||
{ 0x9bd5, 0, 8, 0x01 },
|
||||
{ 0x9bd6, 0, 8, 0x09 },
|
||||
{ 0xd1a0, 1, 1, 0x01 },
|
||||
@ -690,7 +689,7 @@ static struct regdesc tuner_init_qt1010[] = {
|
||||
|
||||
/* Freescale MC44S803 tuner init
|
||||
AF9013_TUNER_MC44S803 = 133 */
|
||||
static struct regdesc tuner_init_mc44s803[] = {
|
||||
static const struct af9013_reg_bit tuner_init_mc44s803[] = {
|
||||
{ 0x9bd5, 0, 8, 0x01 },
|
||||
{ 0x9bd6, 0, 8, 0x06 },
|
||||
{ 0xd1a0, 1, 1, 0x01 },
|
||||
@ -772,7 +771,7 @@ static struct regdesc tuner_init_mc44s803[] = {
|
||||
|
||||
/* unknown, probably for tin can tuner, tuner init
|
||||
AF9013_TUNER_UNKNOWN = 140 */
|
||||
static struct regdesc tuner_init_unknown[] = {
|
||||
static const struct af9013_reg_bit tuner_init_unknown[] = {
|
||||
{ 0x9bd5, 0, 8, 0x01 },
|
||||
{ 0x9bd6, 0, 8, 0x02 },
|
||||
{ 0xd1a0, 1, 1, 0x01 },
|
||||
@ -845,7 +844,7 @@ static struct regdesc tuner_init_unknown[] = {
|
||||
/* NXP TDA18271 & TDA18218 tuner init
|
||||
AF9013_TUNER_TDA18271 = 156
|
||||
AF9013_TUNER_TDA18218 = 179 */
|
||||
static struct regdesc tuner_init_tda18271[] = {
|
||||
static const struct af9013_reg_bit tuner_init_tda18271[] = {
|
||||
{ 0x9bd5, 0, 8, 0x01 },
|
||||
{ 0x9bd6, 0, 8, 0x04 },
|
||||
{ 0xd1a0, 1, 1, 0x01 },
|
||||
@ -920,4 +919,4 @@ static struct regdesc tuner_init_tda18271[] = {
|
||||
{ 0x9bee, 0, 1, 0x01 },
|
||||
};
|
||||
|
||||
#endif /* _AF9013_PRIV_ */
|
||||
#endif /* AF9013_PRIV_H */
|
||||
|
||||
Loading…
Reference in New Issue
Block a user