spi/mpc52xx-psc-spi: check for valid PSC

This driver calls mpc52xx_set_psc_clkdiv() but doesn't check its return value
to see if the PSC is actually valid for SPI use. Add the check and a hint for
the user.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
This commit is contained in:
Wolfram Sang 2009-11-02 03:53:11 +00:00 committed by Grant Likely
parent 3c9059d79f
commit f856cf0178

View File

@ -314,11 +314,13 @@ static int mpc52xx_psc_spi_port_config(int psc_id, struct mpc52xx_psc_spi *mps)
struct mpc52xx_psc __iomem *psc = mps->psc;
struct mpc52xx_psc_fifo __iomem *fifo = mps->fifo;
u32 mclken_div;
int ret = 0;
int ret;
/* default sysclk is 512MHz */
mclken_div = (mps->sysclk ? mps->sysclk : 512000000) / MCLK;
mpc52xx_set_psc_clkdiv(psc_id, mclken_div);
ret = mpc52xx_set_psc_clkdiv(psc_id, mclken_div);
if (ret)
return ret;
/* Reset the PSC into a known state */
out_8(&psc->command, MPC52xx_PSC_RST_RX);
@ -342,7 +344,7 @@ static int mpc52xx_psc_spi_port_config(int psc_id, struct mpc52xx_psc_spi *mps)
mps->bits_per_word = 8;
return ret;
return 0;
}
static irqreturn_t mpc52xx_psc_spi_isr(int irq, void *dev_id)
@ -411,8 +413,10 @@ static int __init mpc52xx_psc_spi_do_probe(struct device *dev, u32 regaddr,
goto free_master;
ret = mpc52xx_psc_spi_port_config(master->bus_num, mps);
if (ret < 0)
if (ret < 0) {
dev_err(dev, "can't configure PSC! Is it capable of SPI?\n");
goto free_irq;
}
spin_lock_init(&mps->lock);
init_completion(&mps->done);