mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-16 14:02:10 +00:00
siimage: fix ->set_pio_mode method to select PIO data transfer
* Remember to select PIO data transfer (with IORDY monitored) in sil_tune_pio() (->set_pio_mode method) so the controller is always programmed correctly for PIO transfers (this is important if DMA is not going to be used). * Don't set DMA/UDMA timings for PIO modes in siimage_tune_chipset(). * Bump driver version. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
This commit is contained in:
parent
326d72f437
commit
ffe5415c3d
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* linux/drivers/ide/pci/siimage.c Version 1.15 Jun 29 2007
|
||||
* linux/drivers/ide/pci/siimage.c Version 1.16 Jul 13 2007
|
||||
*
|
||||
* Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
|
||||
* Copyright (C) 2003 Red Hat <alan@redhat.com>
|
||||
@ -185,7 +185,12 @@ static void sil_tune_pio(ide_drive_t *drive, u8 pio)
|
||||
u16 speedp = 0;
|
||||
unsigned long addr = siimage_seldev(drive, 0x04);
|
||||
unsigned long tfaddr = siimage_selreg(hwif, 0x02);
|
||||
unsigned long base = (unsigned long)hwif->hwif_data;
|
||||
u8 tf_pio = pio;
|
||||
u8 addr_mask = hwif->channel ? (hwif->mmio ? 0xF4 : 0x84)
|
||||
: (hwif->mmio ? 0xB4 : 0x80);
|
||||
u8 mode = 0;
|
||||
u8 unit = drive->select.b.unit;
|
||||
|
||||
/* trim *taskfile* PIO to the slowest of the master/slave */
|
||||
if (pair->present) {
|
||||
@ -207,6 +212,11 @@ static void sil_tune_pio(ide_drive_t *drive, u8 pio)
|
||||
hwif->OUTW(hwif->INW(tfaddr-2)|0x200, tfaddr-2);
|
||||
else
|
||||
hwif->OUTW(hwif->INW(tfaddr-2)&~0x200, tfaddr-2);
|
||||
|
||||
mode = hwif->INB(base + addr_mask);
|
||||
mode &= ~(unit ? 0x30 : 0x03);
|
||||
mode |= (unit ? 0x10 : 0x01);
|
||||
hwif->OUTB(mode, base + addr_mask);
|
||||
} else {
|
||||
pci_write_config_word(hwif->pci_dev, addr, speedp);
|
||||
pci_write_config_word(hwif->pci_dev, tfaddr, speedt);
|
||||
@ -216,6 +226,11 @@ static void sil_tune_pio(ide_drive_t *drive, u8 pio)
|
||||
if (pio > 2)
|
||||
speedp |= 0x200;
|
||||
pci_write_config_word(hwif->pci_dev, tfaddr-2, speedp);
|
||||
|
||||
pci_read_config_byte(hwif->pci_dev, addr_mask, &mode);
|
||||
mode &= ~(unit ? 0x30 : 0x03);
|
||||
mode |= (unit ? 0x10 : 0x01);
|
||||
pci_write_config_byte(hwif->pci_dev, addr_mask, mode);
|
||||
}
|
||||
}
|
||||
|
||||
@ -275,8 +290,7 @@ static int siimage_tune_chipset(ide_drive_t *drive, const u8 speed)
|
||||
case XFER_PIO_1:
|
||||
case XFER_PIO_0:
|
||||
sil_tune_pio(drive, speed - XFER_PIO_0);
|
||||
mode |= ((unit) ? 0x10 : 0x01);
|
||||
break;
|
||||
return ide_config_drive_speed(drive, speed);
|
||||
case XFER_MW_DMA_2:
|
||||
case XFER_MW_DMA_1:
|
||||
case XFER_MW_DMA_0:
|
||||
|
Loading…
Reference in New Issue
Block a user