SIOCADDMULTI/SIOCDELMULTI check whether the driver has a set_multicast_list
method to determine whether it supports multicast. Drivers implementing
secondary unicast support use set_rx_mode however.
Check for both dev->set_multicast_mode and dev->set_rx_mode to determine
multicast capabilities.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce an inline net_eq() to compare two namespaces.
Without CONFIG_NET_NS, since no namespace other than &init_net
exists, it is always 1.
We do not need to convert 1) inline vs inline and
2) inline vs &init_net comparisons.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Introduce neigh_parms/pneigh_entry inlines: neigh_parms_net(), pneigh_net().
Without CONFIG_NET_NS, no namespace other than &init_net exists.
Let's explicitly define them to help compiler optimizations.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Without CONFIG_NET_NS, no namespace other than &init_net exists,
no need to store net in seq_net_private.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Introduce per-sock inlines: sock_net(), sock_net_set()
and per-inet_timewait_sock inlines: twsk_net(), twsk_net_set().
Without CONFIG_NET_NS, no namespace other than &init_net exists.
Let's explicitly define them to help compiler optimizations.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Introduce per-net_device inlines: dev_net(), dev_net_set().
Without CONFIG_NET_NS, no namespace other than &init_net exists.
Let's explicitly define them to help compiler optimizations.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
This file displays the registered packet types, but some of them
(packet sockets creates such) can be bound to a net device and showing
them in a wrong namespace is not correct.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Proxy neighbors do not have any reference counting, so any caller
of pneigh_lookup (unless it's a netlink triggered add/del routine)
should _not_ perform any actions on the found proxy entry.
There's one exception from this rule - the ipv6's ndisc_recv_ns()
uses found entry to check the flags for NTF_ROUTER.
This creates a race between the ndisc and pneigh_delete - after
the pneigh is returned to the caller, the nd_tbl.lock is dropped
and the deleting procedure may proceed.
One of the fixes would be to add a reference counting, but this
problem exists for ndisc only. Besides such a patch would be too
big for -rc4.
So I propose to introduce a __pneigh_lookup() which is supposed
to be called with the lock held and use it in ndisc code to check
the flags on alive pneigh entry.
Changes from v2:
As David noticed, Exported the __pneigh_lookup() to ipv6 module.
The checkpatch generates a warning on it, since the EXPORT_SYMBOL
does not follow the symbol itself, but in this file all the
exports come at the end, so I decided no to break this harmony.
Changes from v1:
Fixed comments from YOSHIFUJI - indentation of prototype in header
and the pndisc_check_router() name - and a compilation fix, pointed
by Daniel - the is_routed was (falsely) considered as uninitialized
by gcc.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update: My mailer ate one of Jarek's feedback mails... Fixed the
parameter in netif_set_gso_max_size() to be u32, not u16. Fixed the
whitespace issue due to a patch import botch. Changed the types from
u32 to unsigned int to be more consistent with other variables in the
area. Also brought the patch up to the latest net-2.6.26 tree.
Update: Made gso_max_size container 32 bits, not 16. Moved the
location of gso_max_size within netdev to be less hotpath. Made more
consistent names between the sock and netdev layers, and added a
define for the max GSO size.
Update: Respun for net-2.6.26 tree.
Update: changed max_gso_frame_size and sk_gso_max_size from signed to
unsigned - thanks Stephen!
This patch adds the ability for device drivers to control the size of
the TSO frames being sent to them, per TCP connection. By setting the
netdevice's gso_max_size value, the socket layer will set the GSO
frame size based on that value. This will propogate into the TCP
layer, and send TSO's of that size to the hardware.
This can be desirable to help tune the bursty nature of TSO on a
per-adapter basis, where one may have 1 GbE and 10 GbE devices
coexisting in a system, one running multiqueue and the other not, etc.
This can also be desirable for devices that cannot support full 64 KB
TSO's, but still want to benefit from some level of segmentation
offloading.
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
zap_completion_queue() retrieves skbs from completion_queue where they have
zero skb->users counter. Before dev_kfree_skb_any() it should be non-zero
yet, so it's increased now.
Reported-and-tested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
'sync' wakeups are a hint towards the scheduler that (certain)
networking related wakeups likely create coupling between tasks.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Based upon a report by Andrew Morton and code analysis done
by Jarek Poplawski.
This reverts 33f807ba0d ("[NETPOLL]:
Kill NETPOLL_RX_DROP, set but never tested.") and
c7b6ea24b4 ("[NETPOLL]: Don't need
rx_flags.").
The rx_flags did get tested for zero vs. non-zero and therefore we do
need those tests and that code which sets NETPOLL_RX_DROP et al.
Signed-off-by: David S. Miller <davem@davemloft.net>
There are some place, that calculate the ARP header length. These
calculations are correct, but
a) some operate with "magic" constants,
b) enlarge the code length (sometimes at the cost of coding style),
c) are not informative from the first glance.
The proposal is to introduce a helper, that includes all the good
sides of these calculations.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
neigh_update sends skb from neigh->arp_queue while neigh_timer_handler
has increased skbs refcount and calls solicit with the
skb. neigh_timer_handler should not increase skbs refcount but make a
copy of the skb and do solicit with the copy.
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The seq_file_operations' dev_mc_seq_xxx callbacks do the same thing as
the dev_seq_xxx ones do, but skip the SEQ_START_TOKEN.
So use the existing exported dev_seq_xxx calls and handle the
SEQ_START_TOKEN in the dev_mc_seq_show().
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This staff will be needed for non-netlink kernel sockets, which should
also not pin a namespace like tcp_socket and icmp_socket.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Device inside the namespace can be started and downed. So, active routing
cache should be cleaned up on device stop.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Default ARP parameters should be findable regardless of the context.
Required to make inetdev_event working.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
neigh_sysctl_register should register sysctl entries inside correct namespace
to avoid naming conflict. Typical example is a loopback. Entries for it
present in all namespaces.
Required to make inetdev_event working.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use proc_create() to make sure that ->proc_fops be setup before gluing
PDE to main tree.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use proc_create() to make sure that ->proc_fops be setup before gluing
PDE to main tree.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits)
[NETFILTER]: fix ebtable targets return
[IP_TUNNEL]: Don't limit the number of tunnels with generic name explicitly.
[NET]: Restore sanity wrt. print_mac().
[NEIGH]: Fix race between neighbor lookup and table's hash_rnd update.
[RTNL]: Validate hardware and broadcast address attribute for RTM_NEWLINK
tg3: ethtool phys_id default
[BNX2]: Update version to 1.7.4.
[BNX2]: Disable parallel detect on an HP blade.
[BNX2]: More 5706S link down workaround.
ssb: Fix support for PCI devices behind a SSB->PCI bridge
zd1211rw: fix sparse warnings
rtl818x: fix sparse warnings
ssb: Fix pcicore cardbus mode
ssb: Make the GPIO API reentrancy safe
ssb: Fix the GPIO API
ssb: Fix watchdog access for devices without a chipcommon
ssb: Fix serial console on new bcm47xx devices
ath5k: Fix build warnings on some 64-bit platforms.
WDEV, ath5k, don't return int from bool function
WDEV: ath5k, fix lock imbalance
...
The neigh_hash_grow() may update the tbl->hash_rnd value, which
is used in all tbl->hash callbacks to calculate the hashval.
Two lookup routines may race with this, since they call the
->hash callback without the tbl->lock held. Since the hash_rnd
is changed with this lock write-locked moving the calls to ->hash
under this lock read-locked closes this gap.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
RTM_NEWLINK allows for already existing links to be modified. For this
purpose do_setlink() is called which expects address attributes with a
payload length of at least dev->addr_len. This patch adds the necessary
validation for the RTM_NEWLINK case.
The address length for links to be created is not checked for now as the
actual attribute length is used when copying the address to the netdevice
structure. It might make sense to report an error if less than addr_len
bytes are provided but enforcing this might break drivers trying to be
smart with not transmitting all zero addresses.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
release_net is missed on the error path in pneigh_lookup.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
IFLA_LINK is no longer a write-only attribute on the kernel side and
must thus be validated. Same goes for the newly introduced
IFLA_LINKINFO.
Fixes undefined behaviour if either of the attributes are not well
formed.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit a0a400d79e ("[NET]: dev_mcast:
add multicast list synchronization helpers") from you introduced a new
field "da_synced" to struct dev_addr_list that is not properly
initialized to 0. So when any of the current users (8021q, macvlan,
mac80211) calls dev_mc_sync/unsync they mess the address list for both
devices.
The attached patch fixed it for me and avoid future problems.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (60 commits)
[NIU]: Bump driver version and release date.
[NIU]: Fix BMAC alternate MAC address indexing.
net: fix kernel-doc warnings in header files
[IPV6]: Use BUG_ON instead of if + BUG in fib6_del_route.
[IPV6]: dst_entry leak in ip4ip6_err. (resend)
bluetooth: do not move child device other than rfcomm
bluetooth: put hci dev after del conn
[NET]: Elminate spurious print_mac() calls.
[BLUETOOTH] hci_sysfs.c: Kill build warning.
[NET]: Remove MAC_FMT
net/8021q/vlan_dev.c: Use print_mac.
[XFRM]: Fix ordering issue in xfrm_dst_hash_transfer().
[BLUETOOTH] net/bluetooth/hci_core.c: Use time_* macros
[IPV6]: Fix hardcoded removing of old module code
[NETLABEL]: Move some initialization code into __init section.
[NETLABEL]: Shrink the genl-ops registration code.
[AX25] ax25_out: check skb for NULL in ax25_kick()
[TCP]: Fix tcp_v4_send_synack() comment
[IPV4]: fix alignment of IP-Config output
Documentation: fix tcp.txt
...
This reverts commit 69cc64d8d9.
It causes recursive locking in IPV6 because unlike other
neighbour layer clients, it even needs neighbour cache
entries to send neighbour soliciation messages :-(
We'll have to find another way to fix this race.
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 45b5035482.
It break locking around dev->link_mode as well as cause
other bootup problems.
Signed-off-by: David S. Miller <davem@davemloft.net>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (82 commits)
[NET]: Make sure sockets implement splice_read
netconsole: avoid null pointer dereference at show_local_mac()
[IPV6]: Fix reversed local_df test in ip6_fragment
[XFRM]: Avoid bogus BUG() when throwing new policy away.
[AF_KEY]: Fix bug in spdadd
[NETFILTER] nf_conntrack_proto_tcp.c: Mistyped state corrected.
net: xfrm statistics depend on INET
[NETFILTER]: make secmark_tg_destroy() static
[INET]: Unexport inet_listen_wlock
[INET]: Unexport __inet_hash_connect
[NET]: Improve cache line coherency of ingress qdisc
[NET]: Fix race in dev_close(). (Bug 9750)
[IPSEC]: Fix bogus usage of u64 on input sequence number
[RTNETLINK]: Send a single notification on device state changes.
[NETLABLE]: Hide netlbl_unlabel_audit_addr6 under ifdef CONFIG_IPV6.
[NETLABEL]: Don't produce unused variables when IPv6 is off.
[NETLABEL]: Compilation for CONFIG_AUDIT=n case.
[GENETLINK]: Relax dances with genl_lock.
[NETLABEL]: Fix lookup logic of netlbl_domhsh_search_def.
[IPV6]: remove unused method declaration (net/ndisc.h).
...
Move networking (core and drivers) docbook to its own networking book.
Fix a few kernel-doc errors in header and source files.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Neil Brown <neilb@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fastcall always expands to empty, remove it.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is a race in Linux kernel file net/core/dev.c, function dev_close.
The function calls function dev_deactivate, which calls function
dev_watchdog_down that deletes the watchdog timer. However, after that, a
driver can call netif_carrier_ok, which calls function
__netdev_watchdog_up that can add the watchdog timer again. Function
unregister_netdevice calls function dev_shutdown that traps the bug
!timer_pending(&dev->watchdog_timer). Moving dev_deactivate after
netif_running() has been cleared prevents function netif_carrier_on
from calling __netdev_watchdog_up and adding the watchdog timer again.
Signed-off-by: Matti Linnanvuori <mattilinnanvuori@yahoo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In do_setlink() a single notification is sent at the end of the
function if any modification occured. If the address has been changed,
another notification is sent.
Both of them is required because originally only the NETDEV_CHANGEADDR
notification was sent and although device state change implies address
change, some programs may expect the original notification. It remains
for compatibity.
If set_operstate() is called from do_setlink(), it doesn't send a
notification, only if it is called from rtnl_create_link() as earlier.
Signed-off-by: Laszlo Attila Toth <panther@balabit.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Frank Blaschka provided the bug report and the initial suggested fix
for this bug. He also validated this version of this fix.
The problem is that the access to neigh->arp_queue is inconsistent, we
grab references when dropping the lock lock to call
neigh->ops->solicit() but this does not prevent other threads of
control from trying to send out that packet at the same time causing
corruptions because both code paths believe they have exclusive access
to the skb.
The best option seems to be to hold the write lock on neigh->lock
during the ->solicit() call. I looked at all of the ndisc_ops
implementations and this seems workable. The only case that needs
special care is the IPV4 ARP implementation of arp_solicit(). It
wants to take neigh->lock as a reader to protect the header entry in
neigh->ha during the emission of the soliciation. We can simply
remove the read lock calls to take care of that since holding the lock
as a writer at the caller providers a superset of the protection
afforded by the existing read locking.
The rest of the ->solicit() implementations don't care whether the
neigh is locked or not.
Signed-off-by: David S. Miller <davem@davemloft.net>
1) We can shrink sizeof(struct flow_cache_entry) by 8 bytes on 64bit arches.
2) No need to align these structures to hardware cache lines, this only waste
ram for very litle gain.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We use a percpu variable named flow_hash_info, which holds 12 bytes.
It is currently marked as ____cacheline_aligned, which makes linker
skip space to properly align this variable.
Before :
c065cc90 D per_cpu__softnet_data
c065cd00 d per_cpu__flow_tables
<Here, hole of 124 bytes>
c065cd80 d per_cpu__flow_hash_info
<Here, hole of 116 bytes>
c065ce00 d per_cpu__flow_flush_tasklets
c065ce14 d per_cpu__rt_cache_stat
This alignement is quite unproductive, and removing it reduces the
size of percpu data (by 240 bytes on my x86 machine), and improves
performance (flow_tables & flow_hash_info can share a single cache
line)
After patch :
c065cc04 D per_cpu__softnet_data
c065cc4c d per_cpu__flow_tables
c065cc50 d per_cpu__flow_hash_info
c065cc5c d per_cpu__flow_flush_tasklets
c065cc70 d per_cpu__rt_cache_stat
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes the following no longer used functions:
- rtattr_parse()
- rtattr_strlcpy()
- __rtattr_parse_nested_compat()
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (25 commits)
virtio: balloon driver
virtio: Use PCI revision field to indicate virtio PCI ABI version
virtio: PCI device
virtio_blk: implement naming for vda-vdz,vdaa-vdzz,vdaaa-vdzzz
virtio_blk: Dont waste major numbers
virtio_blk: provide getgeo
virtio_net: parametrize the napi_weight for virtio receive queue.
virtio: free transmit skbs when notified, not on next xmit.
virtio: flush buffers on open
virtnet: remove double ether_setup
virtio: Allow virtio to be modular and used by modules
virtio: Use the sg_phys convenience function.
virtio: Put the virtio under the virtualization menu
virtio: handle interrupts after callbacks turned off
virtio: reset function
virtio: populate network rings in the probe routine, not open
virtio: Tweak virtio_net defines
virtio: Net header needs hdr_len
virtio: remove unused id field from struct virtio_blk_outhdr
virtio: clarify NO_NOTIFY flag usage
...
Use it in virtio_net (replacing buggy version there), it's also going
to be used by TAP for partial csum support.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: David S. Miller <davem@davemloft.net>
Changes the ANOM_PROMISCUOUS message to include uid and gid fields,
making it consistent with other AUDIT_ANOM_ messages and in the
format the userspace is expecting.
Signed-off-by: Klaus Heinrich Kiwi <klausk@br.ibm.com>
Acked-by: Eric Paris <eparis@redhat.com>
In order to correlate audit records to an individual login add a session
id. This is incremented every time a user logs in and is included in
almost all messages which currently output the auid. The field is
labeled ses= or oses=
Signed-off-by: Eric Paris <eparis@redhat.com>
when using pktgen to send delay packets the module prints repeatedly
to the kernel log:
sleeping for X
sleeping for X
...
This is probably just a debugging item left in and should not be
enabled for regular use of the module.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reuse the existing logic for multicast list synchronization for the
unicast address list. The core of dev_mc_sync/unsync are split out as
__dev_addr_sync/unsync and moved from dev_mcast.c to dev.c. These are
then used to implement dev_unicast_sync/unsync as well.
I'm working on cleaning up Intel's FCoE stack, which generates new MAC
addresses from the fibre channel device id assigned by the fabric as
per the current draft specification in T11. When using such a
protocol in a VLAN environment it would be nice to not always be
forced into promiscuous mode, assuming the underlying Ethernet driver
supports multiple unicast addresses as well.
Signed-off-by: Chris Leech <christopher.leech@intel.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
- Remove an unused definition (LAT_BUCKETS_MAX) in net/core/pktgen.c.
- Remove the corresponding comment.
- The LAT_BUCKETS_MAX seems to have to do with a patch from a long
time ago which was not applied (Ben Greear), which dealt with latency
counters.
See, for example : http://oss.sgi.com/archives/netdev/2002-09/msg00184.html
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A userspace program may wish to set the mark for each packets its send
without using the netfilter MARK target. Changing the mark can be used
for mark based routing without netfilter or for packet filtering.
It requires CAP_NET_ADMIN capability.
Signed-off-by: Laszlo Attila Toth <panther@balabit.hu>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert packet schedulers to use the netlink API. Unfortunately a gradual
conversion is not possible without breaking compilation in the middle or
adding lots of casts, so this patch converts them all in one step. The
patch has been mostly generated automatically with some minor edits to
at least allow seperate conversion of classifiers and actions.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This short patch modifies the IPv4 networking to enable use of the
240.0.0.0/4 (aka "class-E") address space as propsed in the internet
draft draft-fuller-240space-00.txt.
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
White spaces etc. are changed in gen_replace_estimator() to make it
similar to others in a file.
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Save namespace context on the fib rule at the rule creation time and
call routing lookup in the correct namespace.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During network namespace stop process kernel side netlink sockets
belonging to a namespace should be closed. They should not prevent
namespace to stop, so they do not increment namespace usage
counter. Though this counter will be put during last sock_put.
The raplacement of the correct netns for init_ns solves the problem
only partial as socket to be stoped until proper stop is a valid
netlink kernel socket and can be looked up by the user processes. This
is not a problem until it resides in initial namespace (no processes
inside this net), but this is not true for init_net.
So, hold the referrence for a socket, remove it from lookup tables and
only after that change namespace and perform a last put.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Tested-by: Alexey Dobriyan <adobriyan@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Create a specific helper for netlink kernel socket disposal. This just
let the code look better and provides a ground for proper disposal
inside a namespace.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Tested-by: Alexey Dobriyan <adobriyan@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Network namespace allocates 2 kernel netlink sockets, fibnl &
rtnl. These sockets should be disposed properly, i.e. by
sock_release. Plain sock_put is not enough.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Tested-by: Alexey Dobriyan <adobriyan@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The garbage collection function receive the dst_ops structure as
parameter. This is useful for the next incoming patchset because it
will need the dst_ops (there will be several instances) and the
network namespace pointer (contained in the dst_ops).
The protocols which do not take care of the namespaces will not be
impacted by this change (expect for the function signature), they do
just ignore the parameter.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make them static.
[ Moved the inline before, instead of after, call sites. -DaveM ]
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
No need for this. It is declared in the neighbour.h
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Valid network device is always passed into neigh_param_alloc, so
remove extra checking for dev == NULL. Additionally, cleanup bogus
netns assignment.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
fib_rules_unregister is called only after successful register and the
return code is never checked.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
seq_open_net requires that first field of the seq->private data to be
struct seq_net_private. In reality this is a single pointer to a
struct net for now. The patch makes code consistent.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move static rules_ops & rules_mod_lock to the struct net, register the
pernet subsys to init them and enjoy the fact that the core rules
infrastructure works in the namespace.
Real IPv4 fib rules virtualization requires fib tables support in the
namespace and will be done seriously later in the patchset.
Acked-by: Benjamin Thery <benjamin.thery@bull.net>
Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
fib_rules_ops contains operations and the list of configured rules. ops will
become per/namespace soon, so we need them to be known in the default_pref
callback.
Acked-by: Benjamin Thery <benjamin.thery@bull.net>
Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The patch extends the different fib rules API in order to pass the
network namespace pointer. That will allow to access the different
tables from a namespace relative object. As usual, the pointer to the
init_net variable is passed as parameter so we don't break the
network.
Acked-by: Benjamin Thery <benjamin.thery@bull.net>
Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
1) Cleanups (all functions are prefixed by sock_prot_inuse)
sock_prot_inc_use(prot) -> sock_prot_inuse_add(prot,-1)
sock_prot_dec_use(prot) -> sock_prot_inuse_add(prot,-1)
sock_prot_inuse() -> sock_prot_inuse_get()
New functions :
sock_prot_inuse_init() and sock_prot_inuse_free() to abstract pcounter use.
2) if CONFIG_PROC_FS=n, we can zap 'inuse' member from "struct proto",
since nobody wants to read the inuse value.
This saves 1372 bytes on i386/SMP and some cpu cycles.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can void divides (as seen with CONFIG_CC_OPTIMIZE_FOR_SIZE=y on x86)
changing ((HZ<<idx)/4) to ((HZ/4) << idx)
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add __acquires() and __releases() annotations to suppress some sparse
warnings.
example of warnings :
net/ipv4/udp.c:1555:14: warning: context imbalance in 'udp_seq_start' - wrong
count at exit
net/ipv4/udp.c:1571:13: warning: context imbalance in 'udp_seq_stop' -
unexpected unlock
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid an expensive divide (as done in commit
18030477e70a826b91608aee40a987bbd368fec6 but lost in commit
23821d2653111d20e75472c8c5003df1a55309a8)
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduces new memory accounting functions for each network
protocol. Most of them are renamed from memory accounting functions
for stream protocols. At the same time, some stream memory accounting
functions are removed since other functions do same thing.
Renaming:
sk_stream_free_skb() -> sk_wmem_free_skb()
__sk_stream_mem_reclaim() -> __sk_mem_reclaim()
sk_stream_mem_reclaim() -> sk_mem_reclaim()
sk_stream_mem_schedule -> __sk_mem_schedule()
sk_stream_pages() -> sk_mem_pages()
sk_stream_rmem_schedule() -> sk_rmem_schedule()
sk_stream_wmem_schedule() -> sk_wmem_schedule()
sk_charge_skb() -> sk_mem_charge()
Removeing
sk_stream_rfree(): consolidates into sock_rfree()
sk_stream_set_owner_r(): consolidates into skb_set_owner_r()
sk_stream_mem_schedule()
The following functions are added.
sk_has_account(): check if the protocol supports accounting
sk_mem_uncharge(): do the opposite of sk_mem_charge()
In addition, to achieve consolidation, updating sk_wmem_queued is
removed from sk_mem_charge().
Next, to consolidate memory accounting functions, this patch adds
memory accounting calls to network core functions. Moreover, present
memory accounting call is renamed to new accounting call.
Finally we replace present memory accounting calls with new interface
in TCP and SCTP.
Signed-off-by: Takahiro Yasui <tyasui@redhat.com>
Signed-off-by: Hideo Aoki <haoki@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
print_mac() used many most net drivers and format_addr() used by
net-sysfs.c are very similar and they can be intergrated.
format_addr() is also identically redefined in the qla4xxx iscsi
driver.
Export a new function sysfs_format_mac() to be used by net-sysfs,
qla4xxx and others in the future. Both print_mac() and
sysfs_format_mac() call _format_mac_addr() to do the formatting.
Changed print_mac() to use unsigned char * to be consistent with
net_device struct's dev_addr. Added buffer length overrun checking
as suggested by Joe Perches.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sk_forward_alloc being signed, we should take care of divides by
SK_STREAM_MEM_QUANTUM we do in sk_stream_pages() and
__sk_stream_mem_reclaim()
This patchs introduces SK_STREAM_MEM_QUANTUM_SHIFT, defined
as ilog2(SK_STREAM_MEM_QUANTUM), to be able to use right
shifts instead of plain divides.
This should help compiler to choose right shifts instead of
expensive divides (as seen with CONFIG_CC_OPTIMIZE_FOR_SIZE=y on x86)
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I'm actually surprised at how much was involved. At first glance it
appears that the neighbour table data structures are already split by
network device so all that should be needed is to modify the user
interface commands to filter the set of neighbours by the network
namespace of their devices.
However a couple things turned up while I was reading through the
code. The proxy neighbour table allows entries with no network
device, and the neighbour parms are per network device (except for the
defaults) so they now need a per network namespace default.
So I updated the two structures (which surprised me) with their very
own network namespace parameter. Updated the relevant lookup and
destroy routines with a network namespace parameter and modified the
code that interacts with users to filter out neighbour table entries
for devices of other namespaces.
I'm a little concerned that we can modify and display the global table
configuration and from all network namespaces. But this appears good
enough for now.
I keep thinking modifying the neighbour table to have per network
namespace instances of each table type would should be cleaner. The
hash table is already dynamically sized so there are it is not a
limiter. The default parameter would be straight forward to take care
of. However when I look at the how the network table is built and
used I still find some assumptions that there is only a single
neighbour table for each type of table in the kernel. The netlink
operations, neigh_seq_start, the non-core network users that call
neigh_lookup. So while it might be doable it would require more
refactoring than my current approach of just doing a little extra
filtering in the code.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The neigh_del_timer() looks sane - it removes the timer and
(conditionally) puts the neighbor. I expected, that the
neigh_add_timer() is symmetrical to the del one - i.e. it
holds the neighbor and arms the timer - but it turned out
that it was not so.
I think, that making them look symmetrical makes the code
more readable.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The caller must hold the RTNL so let's check it in unregister_netdevice.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This cleanup shrinks size of net/core/dst.o on i386 from 1299 to 1289 bytes.
(This is because dev_hold()/dev_put() are doing atomic_inc()/atomic_dec() and
force compiler to re-evaluate memory contents.)
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Just move the variable on the struct net and adjust
its usage.
Others sysctls from sys.net.core table are more
difficult to virtualize (i.e. make them per-namespace),
but I'll look at them as well a bit later.
Signed-off-by: Pavel Emelyanov <xemul@oenvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some of ctl variables are going to be on the struct
net. Here's the way to adjust the ->data pointer on the
ctl_table-s to point on the right variable.
Since some pointers still point on the global variables,
I keep turning the write bits off on such tables.
This looks to become a common procedure for net sysctls,
so later parts of this code may migrate to some more
generic place.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Making them per-namespace is required for the following
two reasons:
First, some ctl values have a per-namespace meaning.
Second, making them writable from the sub-namespace
is an isolation hole.
So I introduce the pernet operations to create these
tables. For init_net I use the existing statically
declared tables, for sub-namespace they are duplicated
and the write bits are removed from the mode.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
single list_head variable initialized with LIST_HEAD_INIT could almost
always can be replaced with LIST_HEAD declaration, this shrinks the code
and looks better.
Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the fib_rules initialization finished, no return code is provided
so there is no way to know, for the caller, if the initialization has
been successful or has failed. This patch fix that.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Acked-by: Benjamin Thery <benjamin.thery@bull.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move dst entries to a namespace loopback to catch refcounting leaks.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The previous move of the the UDP inDatagrams counter caused each
peek of the same packet to be counted separately. This may be
undesirable.
This patch fixes this by adding a bit to sk_buff to record whether
this packet has already been seen through skb_recv_datagram. We
then only increment the counter when the packet is seen for the
first time.
The only dodgy part is the fact that skb_recv_datagram doesn't have
a good way of returning this new bit of information. So I've added
a new function __skb_recv_datagram that does return this and made
skb_recv_datagram a wrapper around it.
The plan is to eventually replace all uses of skb_recv_datagram with
this new function at which time it can be renamed its proper name.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently it is possible for two processes to peek on the same socket
and end up incrementing the error counter twice for the same packet.
This patch fixes it by making skb_kill_datagram return whether it
succeeded in unlinking the packet and only incrementing the counter
if it did.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using ctl paths we can put all the stuff, related to net/core/
sysctl table, into one file and remove all the references on it.
As a good side effect this hides the "core_table" name from
the global scope :)
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This file is already compiled out when the SYSCTL=n, so
these ifdefs, that enclose the whole file, can be removed.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The appropriate path is prepared right inside this function. It
is prepared similar to how the ctl tables were.
Since the path is modified, it is put on the stack, to avoid
possible races with multiple calls to neigh_sysctl_register() : it
is called by protocols and I didn't find any protection in this
case. Did I overlooked the rtnl lock?.
The stack growth of the neigh_sysctl_register() is 40 bytes. I
believe this is OK, since this is not that much and this function
is not called with the deep stack (device/protocols register).
The device's name is stored on the template to free it later.
This will help with the net namespaces, as each namespace should
have its own set of these ctls.
Besides, this saves ~350 bytes from the neigh template :)
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This mainly removes the err variable, as this call always
return the same error code (-ENOBUFS).
Besides, I moved the call to kmalloc() from the *t declaration
into the code (this is confusing when a variable is initialized
with the result of some call) and removed unneeded comment near
the error path.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows to get rid of the CONFIG_NETFILTER dependency of NET_ACT_NAT.
This patch redefines the old names to keep the noise low, the next patch
converts all users.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The
if (statement)
WARN_ON(1);
looks much better as
WARN_ON(statement);
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently this size is 16, but as the comment says this
is so only because all the chains (except one) has the
length 1. I think, that some day this may change, so
growing this hash will be much easier.
Besides, symbolic names are read better than magic constants.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sock_wake_async() performs a bit different actions
depending on "how" argument. Unfortunately this argument
ony has numerical magic values.
I propose to give names to their constants to help people
reading this function callers understand what's going on
without looking into this function all the time.
I suppose this is 2.6.25 material, but if it's not (or the
naming seems poor/bad/awful), I can rework it against the
current net-2.6 tree.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This function references sk->sk_prot->xxx for many times.
It turned out, that there's so many code in it, that gcc
cannot always optimize access to sk->sk_prot's fields.
After saving the sk->sk_prot on the stack and comparing
disassembled code, it turned out that the function became
~10 bytes shorter and made less dereferences (on i386 and
x86_64). Stack consumption didn't grow.
Besides, this patch drives most of this function into the
80 columns limit.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a separate workqueue for cleaning up a network
namespace. If we use the keventd workqueue to execute cleanup_net(),
there is a problem to unregister devices in IPv6. Indeed the code
that cleans up also schedule work in keventd: as long as cleanup_net()
hasn't return, dst_gc_task() cannot run and as long as dst_gc_task() has
not run, there are still some references pending on the net devices and
cleanup_net() can not unregister and exit the keventd workqueue.
Signed-off-by: Benjamin Thery <benjamin.thery@bull.net>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Acked-by: Denis V. Lunev <den@openvz.org>
Acked-By: Kirill Korotaev <dev@sw.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes the following unused EXPORT_SYMBOL's:
- reqsk_queue_alloc
- __reqsk_queue_destroy
- reqsk_queue_destroy
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
After the previous prep work this just consists of removing checks
limiting the code to work in the initial network namespace, and
updating rtmsg_ifinfo so we can generate events for devices in
something other then the initial network namespace.
Referring to network other network devices like the IFLA_LINK
and IFLA_MASTER attributes do, gets interesting if those network
devices happen to be in other network namespaces. Currently
ifindex numbers are allocated globally so I have taken the path
of least resistance and not still report the information even
though the devices they are talking about are invisible.
If applications start getting confused or when ifindex
numbers become local to the network namespace we may need
to do something different in the future.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Denis V. Lunev <den@openz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
After this patch none of the netlink callback support anything
except the initial network namespace but the rtnetlink infrastructure
now handles multiple network namespaces.
Changes from v2:
- IPv6 addrlabel processing
Changes from v1:
- no need for special rtnl_unlock handling
- fixed IPv6 ndisc
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before I can enable rtnetlink to work in all network namespaces I need
to be certain that something won't break. So this patch deliberately
disables all of the rtnletlink methods in everything except the
initial network namespace. After the methods have been audited this
extra check can be disabled.
Changes from v1:
- added IPv6 addrlabel protection
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The rx_flags variable is redundant. Turning rx on/off is done
via setting the rx_np pointer.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The local_mac is managed by the network device, no need to keep a
spare copy and all the management problems that could cause.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Restructure code slightly to improve readability:
* dereference device once
* change obvious while() loop
* let poll_napi() handle null list itself
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use standard routine for flushing queue.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a protocol/address family number, ARP hardware type,
ethernet packet type, and a line discipline number for the SocketCAN
implementation.
Signed-off-by: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
Signed-off-by: Urs Thuermann <urs.thuermann@volkswagen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sock_valbool_flag() helper is used in setsockopt to
set or reset some flag on the sock. This helper is required
in the net/socket.c only, so move it there.
Besides, patch two places in sys_setsockopt() that repeat
this helper functionality manually.
Since this is not a bugfix, but a trivial cleanup, I
prepared this patch against net-2.6.25, but it also
applies (with a single offset) to the latest net-2.6.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We have a number of copies of dst_discard scattered around the place
which all do the same thing, namely free a packet on the input or
output paths.
This patch deletes all of them except dst_discard and points all the
users to it.
The only non-trivial bit is decnet where it returns an error.
However, conceptually this is identical to the blackhole functions
used in IPv4 and IPv6 which do not return errors. So they should
either all return errors or all return zero. For now I've stuck with
the majority and picked zero as the return value.
It doesn't really matter in practice since few if any driver would
react differently depending on a zero return value or NET_RX_DROP.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Many-many code in the kernel initialized the timer->function
and timer->data together with calling init_timer(timer). There
is already a helper for this. Use it for networking code.
The patch is HUGE, but makes the code 130 lines shorter
(98 insertions(+), 228 deletions(-)).
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add raw drops counter for IPv4 in /proc/net/raw .
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace all lock_cpu_hotplug/unlock_cpu_hotplug from the kernel and use
get_online_cpus and put_online_cpus instead as it highlights the
refcount semantics in these operations.
The new API guarantees protection against the cpu-hotplug operation, but
it doesn't guarantee serialized access to any of the local data
structures. Hence the changes needs to be reviewed.
In case of pseries_add_processor/pseries_remove_processor, use
cpu_maps_update_begin()/cpu_maps_update_done() as we're modifying the
cpu_present_map there.
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
init_net is used added as a parameter to a lot of old API calls, f.e.
ip_dev_find. These calls were exported as EXPORT_SYMBOL. So, export init_net
as EXPORT_SYMBOL to keep networking API consistent.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When unregistering the rtnl_link_ops, all existing devices using
the ops are destroyed. With nested devices this may lead to a
use-after-free despite the use of for_each_netdev_safe() in case
the upper device is next in the device list and is destroyed
by the NETDEV_UNREGISTER notifier.
The easy fix is to restart scanning the device list after removing
a device. Alternatively we could add new devices to the front of
the list to avoid having dependant devices follow the device they
depend on. A third option would be to only restart scanning if
dev->iflink of the next device matches dev->ifindex of the current
one. For now this seems like the safest solution.
With this patch, the veth rtnl_link_ops unregistration can use
rtnl_link_unregister() directly since it now also handles destruction
of multiple devices at once.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 9cd4002942 (Fix race between
neigh_parms_release and neightbl_fill_parms) introduced device
reference counting regressions for several people, see:
http://bugzilla.kernel.org/show_bug.cgi?id=9778
for example.
Signed-off-by: David S. Miller <davem@davemloft.net>
The neightbl_fill_parms() is called under the write-locked tbl->lock
and accesses the parms->dev. The negh_parm_release() calls the
dev_put(parms->dev) without this lock. This creates a tiny race window
on which the parms contains potentially stale dev pointer.
To fix this race it's enough to move the dev_put() upper under the
tbl->lock, but note, that the parms are held by neighbors and thus can
live after the neigh_parms_release() is called, so we still can have a
parm with bad dev pointer.
I didn't find where the neigh->parms->dev is accessed, but still think
that putting the dev is to be done in a place, where the parms are
really freed. Am I right with that?
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Both NetLabel and SELinux (other LSMs may grow to use it as well) rely
on the 'iif' field to determine the receiving network interface of
inbound packets. Unfortunately, at present this field is not
preserved across a skb clone operation which can lead to garbage
values if the cloned skb is sent back through the network stack. This
patch corrects this problem by properly copying the 'iif' field in
__skb_clone() and removing the 'iif' field assignment from
skb_act_clone() since it is no longer needed.
Also, while we are here, put the assignments in the same order as the
offsets to reduce cacheline bounces.
Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This finally adds the code in net_rx_action() to break out of the
->poll()'ing loop when a napi_disable() is found to be pending.
Now, even if a device is being flooded with packets it can be cleanly
brought down.
Signed-off-by: David S. Miller <davem@davemloft.net>
When used function put_cmsg() to copy kernel information to user
application memory, if the memory length given by user application is
not enough, by the bad length calculate of msg.msg_controllen,
put_cmsg() function may cause the msg.msg_controllen to be a large
value, such as 0xFFFFFFF0, so the following put_cmsg() can also write
data to usr application memory even usr has no valid memory to store
this. This may cause usr application memory overflow.
int put_cmsg(struct msghdr * msg, int level, int type, int len, void *data)
{
struct cmsghdr __user *cm
= (__force struct cmsghdr __user *)msg->msg_control;
struct cmsghdr cmhdr;
int cmlen = CMSG_LEN(len);
~~~~~~~~~~~~~~~~~~~~~
int err;
if (MSG_CMSG_COMPAT & msg->msg_flags)
return put_cmsg_compat(msg, level, type, len, data);
if (cm==NULL || msg->msg_controllen < sizeof(*cm)) {
msg->msg_flags |= MSG_CTRUNC;
return 0; /* XXX: return error? check spec. */
}
if (msg->msg_controllen < cmlen) {
~~~~~~~~~~~~~~~~~~~~~~~~
msg->msg_flags |= MSG_CTRUNC;
cmlen = msg->msg_controllen;
}
cmhdr.cmsg_level = level;
cmhdr.cmsg_type = type;
cmhdr.cmsg_len = cmlen;
err = -EFAULT;
if (copy_to_user(cm, &cmhdr, sizeof cmhdr))
goto out;
if (copy_to_user(CMSG_DATA(cm), data, cmlen - sizeof(struct cmsghdr)))
goto out;
cmlen = CMSG_SPACE(len);
~~~~~~~~~~~~~~~~~~~~~~~~~~~
If MSG_CTRUNC flags is set, msg->msg_controllen is less than
CMSG_SPACE(len), "msg->msg_controllen -= cmlen" will cause unsinged int
type msg->msg_controllen to be a large value.
~~~~~~~~~~~~~~~~~~~~~~~~~~~
msg->msg_control += cmlen;
msg->msg_controllen -= cmlen;
~~~~~~~~~~~~~~~~~~~~~
err = 0;
out:
return err;
}
The same promble exists in put_cmsg_compat(). This patch can fix this
problem.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are some return value comments for void functions.
Fixed it.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The skb_morph function only freed the data part of the dst skb, but leaked
the auxiliary data such as the netfilter fields. This patch fixes this by
moving the relevant parts from __kfree_skb to skb_release_all and calling
it in skb_morph.
It also makes kfree_skbmem static since it's no longer called anywhere else
and it now no longer does skb_release_data.
Thanks to Yasuyuki KOZAKAI for finding this problem and posting a patch for
it.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The pktgen_output_ipsec() function can unlock this lock twice
due to merged error and plain paths. Remove one of the calls
to spin_unlock.
Other possible solution would be to place "return 0" right
after the first unlock, but at this place the err is known
to be 0, so these solutions are the same except for this one
makes the code shorter.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The request_sock_queue's listen_opt is either vmalloc-ed or
kmalloc-ed depending on the number of table entries. Thus it
is expected to be handled properly on free, which is done in
the reqsk_queue_destroy().
However the error path in inet_csk_listen_start() calls
the lite version of reqsk_queue_destroy, called
__reqsk_queue_destroy, which calls the kfree unconditionally.
Fix this and move the __reqsk_queue_destroy into a .c file as
it looks too big to be inline.
As David also noticed, this is an error recovery path only,
so no locking is required and the lopt is known to be not NULL.
reqsk_queue_yank_listen_sk is also now only used in
net/core/request_sock.c so we should move it there too.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit fcc5a03ac4:
[NET]: Allow netdev REGISTER/CHANGENAME events to fail
makes the register_netdevice_notifier() handle the error from the
NETDEV_REGISTER event, sent to the registering block.
The bad news is that in this case the notifier block is
not removed from the list, but the error is returned to the
caller. In case the caller is in module init function and
handles this error this can abort the module loading. The
notifier block will be then removed from the kernel, but
will be left in the list. Oops :(
I think that the notifier block should be removed from the
chain in case of error, regardless whether this error is
handled by the caller or not. In the worst case (the error
is _not_ handled) module will not receive the events any
longer.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch reverts Eric's commit 2b008b0a8e
It diets .text & .data section of the kernel if CONFIG_NET_NS is not set.
This is safe after list operations cleanup.
Signed-of-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If CONFIG_NET_NS is not set, the only namespace is possible.
This patch removes list of pernet_operations and cleanups code a bit.
This list is not needed if there are no namespaces. We should just call
->init method.
Additionally, the ->exit will be called on module unloading only. This
case is safe - the code is not discarded. For the in/kernel code, ->exit
should never be called.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes a small memory leak. Default fib rules can be deleted by
the user if the rule does not carry FIB_RULE_PERMANENT flag, f.e. by
ip rule flush
Such a rule will not be freed as the ref-counter has 2 on start and becomes
clearly unreachable after removal.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
* it already statically initialized
* reinitializing live global spinlock every time netns is
setup is also wrong
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
The struct proto has the per-cpu "inuse" counter, which is handled
with a special care. All the handling code hides under the ifdef
CONFIG_SMP and it introduces some code duplication and makes it
look worse than it could.
Clean this.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Because net_free is called by copy_net_ns before its declaration, the
compiler gives an error. This patch puts net_free before copy_net_ns
to fix this.
The compiler error:
net/core/net_namespace.c: In function 'copy_net_ns':
net/core/net_namespace.c:97: error: implicit declaration of function 'net_free'
net/core/net_namespace.c: At top level:
net/core/net_namespace.c:104: warning: conflicting types for 'net_free'
net/core/net_namespace.c:104: error: static declaration of 'net_free' follows non-static declaration
net/core/net_namespace.c:97: error: previous implicit declaration of 'net_free' was here
The error was introduced by the '[NET]: Hide the dead code in the
net_namespace.c' patch (6a1a3b9f68).
Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
"struct proto" currently uses an array stats[NR_CPUS] to track change on
'inuse' sockets per protocol.
If NR_CPUS is big, this means we use a big memory area for this.
Moreover, all this memory area is located on a single node on NUMA
machines, increasing memory pressure on the boot node.
In this patch, I tried to :
- Keep a fast !CONFIG_SMP implementation
- Keep a fast CONFIG_SMP implementation for often used protocols
(tcp,udp,raw,...)
- Introduce a NUMA efficient implementation
Some helper macros are defined in include/net/sock.h
These macros take into account CONFIG_SMP
If a "struct proto" is declared without using DEFINE_PROTO_INUSE /
REF_PROTO_INUSE
macros, it will automatically use a default implementation, using a
dynamically allocated percpu zone.
This default implementation will be NUMA efficient, but might use 32/64
bytes per possible cpu
because of current alloc_percpu() implementation.
However it still should be better than previous implementation based on
stats[NR_CPUS] field.
When a "struct proto" is changed to use the new macros, we use a single
static "int" percpu variable,
lowering the memory and cpu costs, still preserving NUMA efficiency.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sg_mark_end() overwrites the page_link information, but all users want
__sg_mark_end() behaviour where we just set the end bit. That is the most
natural way to use the sg list, since you'll fill it in and then mark the
end point.
So change sg_mark_end() to only set the termination bit. Add a sg_magic
debug check as well, and clear a chain pointer if it is set.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
