As virtio-1 introduced the possibility of the device manipulating the
status byte, revision 2 of the virtio-ccw transport introduced a means
of getting the status byte from the device via READ_STATUS. Let's wire
it up for revisions >= 2 and fall back to returning the stored status
byte if not supported.
Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Make ringtest work on s390 too.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Since ef1b144d ("tools/virtio/ringtest: fix run-on-all.sh to work
without /dev/cpu") run-on-all.sh uses seq 0 $HOST_AFFINITY as the list
of ids of the CPUs to run the command on (assuming ids of online CPUs
are consecutive and start from 0), where $HOST_AFFINITY is the highest
CPU id in the system previously determined using lscpu. This can fail
on systems with offline CPUs.
Instead let's use lscpu to determine the list of online CPUs.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Fixes: ef1b144d ("tools/virtio/ringtest: fix run-on-all.sh to work without
/dev/cpu")
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Using control_work instead of config_work as the 3rd argument to
container_of results in an invalid portdev pointer. Indeed, the work
structure is initialized as below:
INIT_WORK(&portdev->config_work, &config_work_handler);
It leads to a crash when portdev->vdev is dereferenced later. This
bug
is triggered when the guest uses a virtio-console without multiport
feature and receives a config_changed virtio interrupt.
Signed-off-by: G. Campana <gcampana@quarkslab.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is to silence an uninitialized variable warning in debug output.
The problem is this line:
pr_debug("vhost_get_vq_desc: head: %d, out: %u in: %u\n",
head, out, in);
If "head == vq->num" is true on the first iteration then "out" and "in"
aren't initialized. We handle that a few lines after the printk. I was
tempted to just delete the pr_debug() but I decided to just initialize
them to zero instead.
Also checkpatch.pl complains if variables are declared as just
"unsigned" without the "int".
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Declare target_core_fabric_ops strucrues as const as they are only
passed as an argument to the functions target_register_template and
target_unregister_template. The arguments are of type const struct
target_core_fabric_ops *, so target_core_fabric_ops structures having
this property can be declared const.
Done using Coccinelle:
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct target_core_fabric_ops i@p={...};
@ok@
position p;
identifier r.i;
@@
(
target_register_template(&i@p)
|
target_unregister_template(&i@p)
)
@bad@
position p!={r.p,ok.p};
identifier r.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
+const
struct target_core_fabric_ops i;
File size before: drivers/vhost/scsi.o
text data bss dec hex filename
18063 2985 40 21088 5260 drivers/vhost/scsi.o
File size after: drivers/vhost/scsi.o
text data bss dec hex filename
18479 2601 40 21120 5280 drivers/vhost/scsi.o
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
A user noticed that write performance was horrible over loopback and we
traced it to an inversion of when we need to set MSG_MORE. It should be
set when we have more bvec's to send, not when we are on the last bvec.
This patch made the test go from 20 iops to 78k iops.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Fixes: 429a787be6 ("nbd: fix use-after-free of rq/bio in the xmit path")
Signed-off-by: Jens Axboe <axboe@fb.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=4X8Q
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- recognize that a PCI-to-PCIe bridge originates a PCIe hierarchy, so
we enumerate that hierarchy correctly
- X-Gene: fix a change merged for v4.10 that broke MSI
- Keystone: avoid reading undefined registers, which can cause
asynchronous external aborts
- Supermicro X8DTH-i/6/iF/6F: ignore broken _CRS that caused us to
change (and break) existing I/O port assignments
* tag 'pci-v4.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI/MSI: pci-xgene-msi: Fix CPU hotplug registration handling
PCI: Enumerate switches below PCI-to-PCIe bridges
x86/PCI: Ignore _CRS on Supermicro X8DTH-i/6/iF/6F
PCI: designware: Check for iATU unroll only on platforms that use ATU
Pull two s390 bug fixes from Martin Schwidefsky:
"Two changes, the first is a fix to add a missing memory clobber to the
inline assembly to load control registers. This has not caused any
issues so far, but who knows what code gcc will generate in future
versions.
The second change is an update for the default configurations. This
includes CONFIG_BUG_ON_DATA_CORRUPTION=y, we want this to be enabled
for s390. The usual approach to debug problems on production systems
is to use crash on a system dump and for us avoiding data corruptions
is priority one"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: update defconfigs
s390/ctl_reg: make __ctl_load a full memory barrier
For such a file mapping,
[0-4k][hole][8k-12k]
In NO_HOLES mode, we don't have the [hole] extent any more.
Commit c1aa45759e ("Btrfs: fix shrinking truncate when the no_holes feature is enabled")
fixed disk isize not being updated in NO_HOLES mode when data is not flushed.
However, even if data has been flushed, we can still have trouble
in updating disk isize since we updated disk isize to 'start' of
the last evicted extent.
Reviewed-by: Chris Mason <clm@fb.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The following deadlock is seen when executing generic/113 test,
---------------------------------------------------------+----------------------------------------------------
Direct I/O task Fast fsync task
---------------------------------------------------------+----------------------------------------------------
btrfs_direct_IO
__blockdev_direct_IO
do_blockdev_direct_IO
do_direct_IO
btrfs_get_blocks_direct
while (blocks needs to written)
get_more_blocks (first iteration)
btrfs_get_blocks_direct
btrfs_create_dio_extent
down_read(&BTRFS_I(inode) >dio_sem)
Create and add extent map and ordered extent
up_read(&BTRFS_I(inode) >dio_sem)
btrfs_sync_file
btrfs_log_dentry_safe
btrfs_log_inode_parent
btrfs_log_inode
btrfs_log_changed_extents
down_write(&BTRFS_I(inode) >dio_sem)
Collect new extent maps and ordered extents
wait for ordered extent completion
get_more_blocks (second iteration)
btrfs_get_blocks_direct
btrfs_create_dio_extent
down_read(&BTRFS_I(inode) >dio_sem)
--------------------------------------------------------------------------------------------------------------
In the above description, Btrfs direct I/O code path has not yet started
submitting bios for file range covered by the initial ordered
extent. Meanwhile, The fast fsync task obtains the write semaphore and
waits for I/O on the ordered extent to get completed. However, the
Direct I/O task is now blocked on obtaining the read semaphore.
To resolve the deadlock, this commit modifies the Direct I/O code path
to obtain the read semaphore before invoking
__blockdev_direct_IO(). The semaphore is then given up after
__blockdev_direct_IO() returns. This allows the Direct I/O code to
complete I/O on all the ordered extents it creates.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Below test script can reveal this bug:
dd if=/dev/zero of=fs.img bs=$((1024*1024)) count=100
dev=$(losetup --show -f fs.img)
mkdir -p /mnt/mntpoint
mkfs.btrfs -f $dev
mount $dev /mnt/mntpoint
cd /mnt/mntpoint
echo "workdir is: /mnt/mntpoint"
blocksize=$((128 * 1024))
dd if=/dev/zero of=testfile bs=$blocksize count=1
sync
count=$((17*1024*1024*1024/blocksize))
echo "file size is:" $((count*blocksize))
for ((i = 1; i <= $count; i++)); do
dst_offset=$((blocksize * i))
xfs_io -f -c "reflink testfile 0 $dst_offset $blocksize"\
testfile > /dev/null
done
sync
truncate --size 0 testfile
The last truncate operation will fail for ENOSPC reason, but indeed
it should not fail.
In btrfs_truncate(), we use a temporary block_rsv to do truncate
operation. With every btrfs_truncate_inode_items() call, we migrate space
to this block_rsv, but forget to cleanup previous reservation, which
will make this block_rsv's reserved bytes keep growing, and this reserved
space will only be released in the end of btrfs_truncate(), this metadata
leak will impact other's metadata reservation. In this case, it's
"btrfs_start_transaction(root, 2);" fails for enospc error, which make
this truncate operation fail.
Call btrfs_block_rsv_release() to fix this bug.
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A driver using dev_alloc_page() must not reuse a page that had to
use emergency memory reserve.
Otherwise all packets using this page will be immediately dropped,
unless for very specific sockets having SOCK_MEMALLOC bit set.
This issue might be hard to debug, because only a fraction of the RX
ring buffer would suffer from drops.
Fixes: 75354148ce ("gianfar: Add paged allocation and Rx S/G")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Claudiu Manoil <claudiu.manoil@freescale.com>
Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Found that if we run LTP netstress test with large MSS (65K),
the first attempt from server to send data comparable to this
MSS on fastopen connection will be delayed by the probe timer.
Here is an example:
< S seq 0:0 win 43690 options [mss 65495 wscale 7 tfo cookie] length 32
> S. seq 0:0 ack 1 win 43690 options [mss 65495 wscale 7] length 0
< . ack 1 win 342 length 0
Inside tcp_sendmsg(), tcp_send_mss() returns max MSS in 'mss_now',
as well as in 'size_goal'. This results the segment not queued for
transmition until all the data copied from user buffer. Then, inside
__tcp_push_pending_frames(), it breaks on send window test and
continues with the check probe timer.
Fragmentation occurs in tcp_write_wakeup()...
+0.2 > P. seq 1:43777 ack 1 win 342 length 43776
< . ack 43777, win 1365 length 0
> P. seq 43777:65001 ack 1 win 342 options [...] length 21224
...
This also contradicts with the fact that we should bound to the half
of the window if it is large.
Fix this flaw by correctly initializing max_window. Before that, it
could have large values that affect further calculations of 'size_goal'.
Fixes: 168a8f5805 ("tcp: TCP Fast Open Server - main code path")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A cleanup removed the only user of this variable
mlx5/core/en_ethtool.c: In function 'mlx5e_set_channels':
mlx5/core/en_ethtool.c:546:6: error: unused variable 'ncv' [-Werror=unused-variable]
Let's remove the declaration as well.
Fixes: 639e9e9416 ("net/mlx5e: Remove unnecessary checks when setting num channels")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Just like commit 4acd4945cd ("ipv6: addrconf: Avoid calling
netdevice notifiers with RCU read-side lock"), it is unnecessary
to make addrconf_disable_change() use RCU iteration over the
netdev list, since it already holds the RTNL lock, or we may meet
Illegal context switch in RCU read-side critical section.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ganesg will be taking over as maintainer from now
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Generally, taking an unexpected exception should be a fatal event, and
bad_mode is intended to cater for this. However, it should be possible
to contain unexpected synchronous exceptions from EL0 without bringing
the kernel down, by sending a SIGILL to the task.
We tried to apply this approach in commit 9955ac47f4 ("arm64:
don't kill the kernel on a bad esr from el0"), by sending a signal for
any bad_mode call resulting from an EL0 exception.
However, this also applies to other unexpected exceptions, such as
SError and FIQ. The entry paths for these exceptions branch to bad_mode
without configuring the link register, and have no kernel_exit. Thus, if
we take one of these exceptions from EL0, bad_mode will eventually
return to the original user link register value.
This patch fixes this by introducing a new bad_el0_sync handler to cater
for the recoverable case, and restoring bad_mode to its original state,
whereby it calls panic() and never returns. The recoverable case
branches to bad_el0_sync with a bl, and returns to userspace via the
usual ret_to_user mechanism.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Fixes: 9955ac47f4 ("arm64: don't kill the kernel on a bad esr from el0")
Reported-by: Mark Salter <msalter@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This further refines the changes made to conntrack gc_worker in
commit e0df8cae6c ("netfilter: conntrack: refine gc worker heuristics").
The main idea of that change was to reduce the scan interval when evictions
take place.
However, on the reporters' setup, there are 1-2 million conntrack entries
in total and roughly 8k new (and closing) connections per second.
In this case we'll always evict at least one entry per gc cycle and scan
interval is always at 1 jiffy because of this test:
} else if (expired_count) {
gc_work->next_gc_run /= 2U;
next_run = msecs_to_jiffies(1);
being true almost all the time.
Given we scan ~10k entries per run its clearly wrong to reduce interval
based on nonzero eviction count, it will only waste cpu cycles since a vast
majorities of conntracks are not timed out.
Thus only look at the ratio (scanned entries vs. evicted entries) to make
a decision on whether to reduce or not.
Because evictor is supposed to only kick in when system turns idle after
a busy period, pick a high ratio -- this makes it 50%. We thus keep
the idea of increasing scan rate when its likely that table contains many
expired entries.
In order to not let timed-out entries hang around for too long
(important when using event logging, in which case we want to timely
destroy events), we now scan the full table within at most
GC_MAX_SCAN_JIFFIES (16 seconds) even in worst-case scenario where all
timed-out entries sit in same slot.
I tested this with a vm under synflood (with
sysctl net.netfilter.nf_conntrack_tcp_timeout_syn_recv=3).
While flood is ongoing, interval now stays at its max rate
(GC_MAX_SCAN_JIFFIES / GC_MAX_BUCKETS_DIV -> 125ms).
With feedback from Nicolas Dichtel.
Reported-by: Denys Fedoryshchenko <nuclearcat@nuclearcat.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Fixes: b87a2f9199 ("netfilter: conntrack: add gc worker to remove timed-out entries")
Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Tested-by: Denys Fedoryshchenko <nuclearcat@nuclearcat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Instead of breaking loop and instant resched, don't bother checking
this in first place (the loop calls cond_resched for every bucket anyway).
Suggested-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Commit 345857b ("HID: wacom: generic: Add support for sensor offsets") included
a change to the operation and location of the call to 'wacom_add_shared_data'
in 'wacom_parse_and_register'. The modifications included moving it higher up
so that it would occur before the call to 'wacom_retrieve_hid_descriptor'. This
was done to prevent a crash that would have occured when the report containing
tablet offsets was fed into the driver with 'wacom_hid_report_raw_event'
(specifically: the various 'wacom_wac_*_report' functions were written with the
assumption that they would only be called once tablet setup had completed;
'wacom_wac_pen_report' in particular dereferences 'shared' which wasn't yet
allocated).
Moving the call to 'wacom_add_shared_data' effectively prevented the crash but
also broke the sibiling detection code which assumes that the HID descriptor
has been read and the various device_type flags set.
To fix this situation, we restore the original 'wacom_add_shared_data'
operation and location and instead implement an alternative change that can
also prevent the crash. Specifically, we notice that the report functions
mentioned above expect to be called only for input reports. By adding a check,
we can prevent feature reports (such as the offset report) from
causing trouble.
Fixes: 345857bb49 ("HID: wacom: generic: Add support for sensor offsets")
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Ping Cheng <pingc@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The GXBB and GXL/GXM pinctrl drivers had a configuration which conflicts
with uart_ao_a. According to the GXBB ("S905") datasheet the AO UART
functions are:
- GPIOAO_0: Func1 = UART_TX_AO_A (bit 12), Func2 = UART_TX_AO_B (bit 26)
- GPIOAO_1: Func1 = UART_RX_AO_A (bit 11), Func2 = UART_RX_AO_B (bit 25)
- GPIOAO_4: Func2 = UART_TX_AO_B (bit 24)
- GPIOAO_5: Func2 = UART_RX_AO_B (bit 25)
The existing definition for uart_AO_A already uses GPIOAO_0 and GPIOAO_1.
The old definition of uart_AO_B however was broken, as it used GPIOAO_0
for TX (which would be fine) and two pins (GPIOAO_1 and GPIOAO_5) for RX
(which does not make any sense).
This fixes the uart_AO_B configuration by moving it to GPIOAO_4 and
GPIOAO_5 (it would be possible to use GPIOAO_0 and GPIOAO_1 in theory,
but all existing hardware uses uart_AO_A there).
The fix for GXBB and GXL/GXM is identical since it seems that these
specific pins are identical on both SoC variants.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The helper function for adding a GPIO chip compiles in a lockdep
key for debugging, the same key is needed for nested chips as
well.
The macro construction is unreadable, replace this with two
static inlines instead.
The _gpiochip_irqchip_add prefixed function is not helpful,
rename it with gpiochip_irqchip_add_key() that tell us what the
function is actually doing.
Fixes: d245b3f9bd ("gpio: simplify adding threaded interrupts")
Cc: Roger Quadros <rogerq@ti.com>
Reported-by: Clemens Gruber <clemens.gruber@pqgruber.com>
Reported-by: Roger Quadros <rogerq@ti.com>
Reported-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Clemens Gruber <clemens.gruber@pqgruber.com>
Tested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The programming model has been fixed with prev patches so re-enable it
by default
This reverts commit 23cb1f6440.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
arc_cache_init() is called for each core so can't be tagged __init.
However bulk of it is only executed by master core and thus is candidate
for __init reaping.
So split it up to allow that.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
omap1, and then a handful of trivial fixes for boards and devices to
work:
- Fixes TI wilink bluetooth strange platform data baud rate
- Remove duplicate pinmux line for am335x-icev2
- Fix omap1 dma regression
- Fix uninitialized return value for wkup_m3_ipc_probe()
- Fix Ethernet PHY binding typo for dra72-evm
- Fix init for omap5 and dra7 sata ports
- Fix mmc card detect pin for Logic PD SOM-LV
-----BEGIN PGP SIGNATURE-----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=VJaM
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.10/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fixes for omaps for v4.10-rc cycle. Mostly a DMA regression fix for
omap1, and then a handful of trivial fixes for boards and devices to
work:
- Fixes TI wilink bluetooth strange platform data baud rate
- Remove duplicate pinmux line for am335x-icev2
- Fix omap1 dma regression
- Fix uninitialized return value for wkup_m3_ipc_probe()
- Fix Ethernet PHY binding typo for dra72-evm
- Fix init for omap5 and dra7 sata ports
- Fix mmc card detect pin for Logic PD SOM-LV
* tag 'omap-for-v4.10/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap3: Fix Card Detect and Write Protect on Logic PD SOM-LV
ARM: dts: OMAP5 / DRA7: indicate that SATA port 0 is available.
ARM: dts: dra72-evm-revc: fix typo in ethernet-phy node
soc: ti: wkup_m3_ipc: Fix error return code in wkup_m3_ipc_probe()
ARM: OMAP1: DMA: Correct the number of logical channels
ARM: dts: am335x-icev2: Remove the duplicated pinmux setting
ARM: OMAP2+: Fix WL1283 Bluetooth Baud Rate
Signed-off-by: Olof Johansson <olof@lixom.net>
vs. fixed 512M before.
But this still assumes that all of memory is under IOC which may not be
true for the SoC. Improve that later when this becomes a real issue, by
specifying this from DT.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
On AXS103 release bitfiles, DMA data corruptions were seen because IOC
setup was not following the recommended way in documentation.
Flipping IOC on when caches are enabled or coherency transactions are in
flight, might cause some of the memory operations to not observe
coherency as expected.
So strictly follow the programming model recommendations as documented
in comment header above arc_ioc_setup()
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
This patch adds two helpers, bpf_map_area_alloc() and bpf_map_area_free(),
that are to be used for map allocations. Using kmalloc() for very large
allocations can cause excessive work within the page allocator, so i) fall
back earlier to vmalloc() when the attempt is considered costly anyway,
and even more importantly ii) don't trigger OOM killer with any of the
allocators.
Since this is based on a user space request, for example, when creating
maps with element pre-allocation, we really want such requests to fail
instead of killing other user space processes.
Also, don't spam the kernel log with warnings should any of the allocations
fail under pressure. Given that, we can make backend selection in
bpf_map_area_alloc() generic, and convert all maps over to use this API
for spots with potentially large allocation requests.
Note, replacing the one kmalloc_array() is fine as overflow checks happen
earlier in htab_map_alloc(), since it must also protect the multiplication
for vmalloc() should kmalloc_array() fail.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Trying to add an mpls encap route when the MPLS modules are not loaded
hangs. For example:
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
$ ip route add 10.10.10.10/32 encap mpls 100 via inet 10.100.1.2
The ip command hangs:
root 880 826 0 21:25 pts/0 00:00:00 ip route add 10.10.10.10/32 encap mpls 100 via inet 10.100.1.2
$ cat /proc/880/stack
[<ffffffff81065a9b>] call_usermodehelper_exec+0xd6/0x134
[<ffffffff81065efc>] __request_module+0x27b/0x30a
[<ffffffff814542f6>] lwtunnel_build_state+0xe4/0x178
[<ffffffff814aa1e4>] fib_create_info+0x47f/0xdd4
[<ffffffff814ae451>] fib_table_insert+0x90/0x41f
[<ffffffff814a8010>] inet_rtm_newroute+0x4b/0x52
...
modprobe is trying to load rtnl-lwt-MPLS:
root 881 5 0 21:25 ? 00:00:00 /sbin/modprobe -q -- rtnl-lwt-MPLS
and it hangs after loading mpls_router:
$ cat /proc/881/stack
[<ffffffff81441537>] rtnl_lock+0x12/0x14
[<ffffffff8142ca2a>] register_netdevice_notifier+0x16/0x179
[<ffffffffa0033025>] mpls_init+0x25/0x1000 [mpls_router]
[<ffffffff81000471>] do_one_initcall+0x8e/0x13f
[<ffffffff81119961>] do_init_module+0x5a/0x1e5
[<ffffffff810bd070>] load_module+0x13bd/0x17d6
...
The problem is that lwtunnel_build_state is called with rtnl lock
held preventing mpls_init from registering.
Given the potential references held by the time lwtunnel_build_state it
can not drop the rtnl lock to the load module. So, extract the module
loading code from lwtunnel_build_state into a new function to validate
the encap type. The new function is called while converting the user
request into a fib_config which is well before any table, device or
fib entries are examined.
Fixes: 745041e2aa ("lwtunnel: autoload of lwt modules")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the TPA GRO code path, initialize the tcp_opt_len variable to 0 so
that it will be correct for packets without TCP timestamps. The bug
caused the SKB fields to be incorrectly set up for packets without
TCP timestamps, leading to these packets being rejected by the stack.
Reported-by: Andy Gospodarek <andrew.gospodarek@broadocm.com>
Acked-by: Andy Gospodarek <andrew.gospodarek@broadocm.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- A long standing issue in UBIFS journal replay code
- Fallout from the merge window
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=GrH8
-----END PGP SIGNATURE-----
Merge tag 'upstream-4.10-rc5' of git://git.infradead.org/linux-ubifs
Pull UBIFS fixes from Richard Weinberger:
"This contains fixes for UBIFS:
- a long standing issue in UBIFS journal replay code
- fallout from the merge window"
* tag 'upstream-4.10-rc5' of git://git.infradead.org/linux-ubifs:
ubifs: Fix journal replay wrt. xattr nodes
ubifs: remove redundant checks for encryption key
ubifs: allow encryption ioctls in compat mode
ubifs: add CONFIG_BLOCK dependency for encryption
ubifs: fix unencrypted journal write
ubifs: ensure zero err is returned on successful return
Commit a1cba5613e ("net: phy: Add Broadcom phy library for common
interfaces") make the BCM63xx PHY driver utilize bcm_phy_config_intr()
which would appear to do the right thing, except that it does not write
to the MII_BCM63XX_IR register but to MII_BCM54XX_ECR which is
different.
This would be causing invalid link parameters and events from being
generated by the PHY interrupt.
Fixes: a1cba5613e ("net: phy: Add Broadcom phy library for common interfaces")
Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A harmless warning just got introduced:
fs/xfs/libxfs/xfs_dir2.h:40:8: error: type qualifiers ignored on function return type [-Werror=ignored-qualifiers]
Removing the 'const' modifier avoids the warning and has no
other effect.
Fixes: 1fc4d33fed ("xfs: replace xfs_mode_to_ftype table with switch statement")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Ashizuka reported a highmem oddity and sent a patch for freescale
fec driver.
But the problem root cause is that core networking stack
must ensure no skb with highmem fragment is ever sent through
a device that does not assert NETIF_F_HIGHDMA in its features.
We need to call illegal_highdma() from harmonize_features()
regardless of CSUM checks.
Fixes: ec5f061564 ("net: Kill link between CSUM and SG features.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Pravin Shelar <pshelar@ovn.org>
Reported-by: "Ashizuka, Yuusuke" <ashiduka@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Druzhinin says:
====================
xen-netback: fix memory leaks on XenBus disconnect
Just split the initial patch in two as proposed by Wei.
Since the approach for locking netdev statistics is inconsistent (tends not
to have any locking at all) accross the kernel we'd better to rely on our
internal lock for this purpose.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
vif->lock is used to protect statistics gathering agents from using the
queue structure during cleaning.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eliminate memory leaks introduced several years ago by cleaning the
queue resources which are allocated on XenBus connection event. Namely, queue
structure array and pages used for IO rings.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can't access c->pde if CONFIG_PROC_FS is disabled:
net/ipv4/netfilter/ipt_CLUSTERIP.c: In function 'clusterip_config_find_get':
net/ipv4/netfilter/ipt_CLUSTERIP.c:147:9: error: 'struct clusterip_config' has no member named 'pde'
This moves the check inside of another #ifdef.
Fixes: 6c5d5cfbe3 ("netfilter: ipt_CLUSTERIP: check duplicate config when initializing")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Tariq Toukan says:
====================
ethtool fix
This patchset from Eran contains a fix to ethtool set_channels, where the call
to get_channels with an uninitialized parameter might result in garbage fields.
It also contains two followup changes in our mlx4/mlx5 Eth drivers.
Series generated against net commit:
0faa9cb5b3 net sched actions: fix refcnt when GETing of action after bind
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Boundaries checks for the number of RX and TX should be checked by the
caller and not in the driver.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Boundaries checks for the number of RX, TX, other and combined channels
should be checked by the caller and not in the driver.
In addition, remove wrong memset on get channels as it overrides the cmd
field in the requester struct.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ethtool channels respond struct was uninitialized when querying device
channel boundaries settings. As a result, unreported fields by the driver
hold garbage. This may cause sending unsupported params to driver.
Fixes: 8bf3686204 ('ethtool: ensure channel counts are within bounds ...')
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
CC: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull ARM fixes from Russell King:
"A few ARM fixes:
- fix a crash while performing TLB maintanence on early ARM SMP cores
- blacklist Scorpion CPUs for hardware breakpoints
- ARMs asm/types.h has been included as part of the UAPI due to the
way the makefiles work, move it to uapi/asm/types.h to make it
official
- fix up ftrace syscall name matching"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8613/1: Fix the uaccess crash on PB11MPCore
MAINTAINERS: update rmk's entries
ARM: put types.h in uapi
ARM: 8634/1: hw_breakpoint: blacklist Scorpion CPUs
ARM: 8632/1: ftrace: fix syscall name matching
commit d65283f7b6 added mod->arch.secstr under
CONFIG_ARC_DW2_UNWIND, but used it unconditionally which broke builds
when the option was disabled. Fix that by adjusting the #ifdef guard.
And while at it add a missing guard (for unwinder) in module.c as well
Reported-by: Waldemar Brodkorb <wbx@openadk.org>
Cc: stable@vger.kernel.org #4.9
Fixes: d65283f7b6 ("ARC: module: elide loop to save reference to .eh_frame")
Tested-by: Anton Kolesov <akolesov@synopsys.com>
Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com>
[abrodkin: provided fixlet to Kconfig per failure in allnoconfig build]
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
