Add the missing unlock before return from function ti_qspi_start_transfer_one()
in the error handling case.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Mark Brown <broonie@linaro.org>
spi: quad: fix the name of DT property in patch
The previous property name spi-tx-nbits and spi-rx-nbits looks not
human-readable. To make it consistent with other devices, using property
name spi-tx-bus-width and spi-rx-bus-width instead of the previous one
specify the number of data wires that spi controller will work in.
Add the specification in spi-bus.txt.
Signed-off-by: wangyuhang <wangyuhang2014@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
da9063_ldo_lim_event() is only referenced in this driver, make it static.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
This patch addresses a v3.11 specific regression where se_cmd->state_list
was being leaked during a fabric WRITE failure, when the fabric releases
an associated se_cmd descriptor before I/O submission occurs, and normal
fast path callbacks have a chance to call target_remove_from_state_list().
It was manifesting with Poison overwritten messages with iscsi-target
once an ImmediateData payload CRC32C failure occured.
This bug was originally introduced during v3.11-rc1 with the following
commit:
commit 0b66818ac6
Author: Nicholas Bellinger <nab@linux-iscsi.org>
Date: Thu Jun 6 01:36:41 2013 -0700
target: Drop unnecessary CMD_T_DEV_ACTIVE check from transport_lun_remove_cmd
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
In the case spi_master_initialize_queue() fails, current code calls
device_unregister() before return error from spi_register_master().
However, all the drivers call spi_master_put() in the error path if
spi_register_master() fails. Thus we should call device_del() rather than
device_unregister() before return error from spi_register_master().
This also makes all the spi_register_master() error handling consistent,
because all other error paths of spi_register_master() expect drivers to
call spi_master_put() if spi_register_master() fails.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Obviously the of_device_id table name is wrong.
Fix below build error:
CC [M] drivers/spi/spi-efm32.o
drivers/spi/spi-efm32.c:499:1: error: '__mod_of_device_table' aliased to undefined symbol 'efm32_uart_dt_ids'
make[2]: *** [drivers/spi/spi-efm32.o] Error 1
make[1]: *** [drivers/spi] Error 2
make: *** [drivers] Error 2
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
The Altera SPI hardware can be configured to support data width from 1 to 32
since Quartus II 8.1. To avoid truncation by integer division, use DIV_ROUND_UP
to calculate hw->bytes_per_word.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Mark Brown <broonie@linaro.org>
In rspi_remove(), current code dereferences rspi after spi_unregister_master(),
thus add an extra spi_master_get() call is necessary to prevent use after free.
Current code already has an extra spi_master_put() call in rspi_remove(), so
this patch just adds a spi_master_get() call rather than a spi_master_get() with
spi_master_put() calls.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
This patch fixes the incorrect assignment of a variable with type 'le16'
to a variable with type 'unsigned int'.
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since all of the memory hotplug operations have to be carried out
under device_hotplug_lock, they won't need to acquire pm_mutex if
device_hotplug_lock is held around hibernation.
For this reason, make the hibernation code acquire
device_hotplug_lock after freezing user space processes and
release it before thawing them. At the same tim drop the
lock_system_sleep() and unlock_system_sleep() calls from
lock_memory_hotplug() and unlock_memory_hotplug(), respectively.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
The hibernation core uses special memory bitmaps during image
creation and restoration and traditionally those bitmaps are
allocated before freezing tasks, because in the past GFP_KERNEL
allocations might not work after all tasks had been frozen.
However, this is an anachronism, because hibernation_snapshot()
now calls hibernate_preallocate_memory() which allocates memory
for the image upfront anyway, so the memory bitmaps may be
allocated after freezing user space safely.
For this reason, move all of the create_basic_memory_bitmaps()
calls after freeze_processes() and all of the corresponding
free_basic_memory_bitmaps() calls before thaw_processes().
This will allow us to hold device_hotplug_lock around hibernation
without the need to worry about freezing issues with user space
processes attempting to acquire it via sysfs attributes after the
creation of memory bitmaps and before the freezing of tasks.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Pull networking fixes from David Miller:
1) There was a simplification in the ipv6 ndisc packet sending
attempted here, which avoided using memory accounting on the
per-netns ndisc socket for sending NDISC packets. It did fix some
important issues, but it causes regressions so it gets reverted here
too. Specifically, the problem with this change is that the IPV6
output path really depends upon there being a valid skb->sk
attached.
The reason we want to do this change in some form when we figure out
how to do it right, is that if a device goes down the ndisc_sk
socket send queue will fill up and block NDISC packets that we want
to send to other devices too. That's really bad behavior.
Hopefully Thomas can come up with a better version of this change.
2) Fix a severe TCP performance regression by reverting a change made
to dev_pick_tx() quite some time ago. From Eric Dumazet.
3) TIPC returns wrongly signed error codes, fix from Erik Hugne.
4) Fix OOPS when doing IPSEC over ipv4 tunnels due to orphaning the
skb->sk too early. Fix from Li Hongjun.
5) RAW ipv4 sockets can use the wrong routing key during lookup, from
Chris Clark.
6) Similar to #1 revert an older change that tried to use plain
alloc_skb() for SYN/ACK TCP packets, this broke the netfilter owner
mark which needs to see the skb->sk for such frames. From Phil
Oester.
7) BNX2x driver bug fixes from Ariel Elior and Yuval Mintz,
specifically in the handling of virtual functions.
8) IPSEC path error propagations to sockets is not done properly when
we have v4 in v6, and v6 in v4 type rules. Fix from Hannes Frederic
Sowa.
9) Fix missing channel context release in mac80211, from Johannes Berg.
10) Fix network namespace handing wrt. SCM_RIGHTS, from Andy
Lutomirski.
11) Fix usage of bogus NAPI weight in jme, netxen, and ps3_gelic
drivers. From Michal Schmidt.
12) Hopefully a complete and correct fix for the genetlink dump locking
and module reference counting. From Pravin B Shelar.
13) sk_busy_loop() must do a cpu_relax(), from Eliezer Tamir.
14) Fix handling of timestamp offset when restoring a snapshotted TCP
socket. From Andrew Vagin.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits)
net: fec: fix time stamping logic after napi conversion
net: bridge: convert MLDv2 Query MRC into msecs_to_jiffies for max_delay
mISDN: return -EINVAL on error in dsp_control_req()
net: revert 8728c544a9 ("net: dev_pick_tx() fix")
Revert "ipv6: Don't depend on per socket memory for neighbour discovery messages"
ipv4 tunnels: fix an oops when using ipip/sit with IPsec
tipc: set sk_err correctly when connection fails
tcp: tcp_make_synack() should use sock_wmalloc
bridge: separate querier and query timer into IGMP/IPv4 and MLD/IPv6 ones
ipv6: Don't depend on per socket memory for neighbour discovery messages
ipv4: sendto/hdrincl: don't use destination address found in header
tcp: don't apply tsoffset if rcv_tsecr is zero
tcp: initialize rcv_tstamp for restored sockets
net: xilinx: fix memleak
net: usb: Add HP hs2434 device to ZLP exception table
net: add cpu_relax to busy poll loop
net: stmmac: fixed the pbl setting with DT
genl: Hold reference on correct module while netlink-dump.
genl: Fix genl dumpit() locking.
xfrm: Fix potential null pointer dereference in xdst_queue_output
...
The addition SPI quad support made the DT properties mandatory, breaking
compatibility with existing systems. Fix that by making them optional,
also improving the error messages while we're at it.
Signed-off-by: Mark Brown <broonie@linaro.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Change the ordering of device hotplug locks in scan.c so that
acpi_scan_lock is always acquired after device_hotplug_lock.
This will make it possible to use device_hotplug_lock around some
code paths that acquire acpi_scan_lock safely (most importantly
system suspend and hibernation). Apart from that, acpi_scan_lock
is platform-specific and device_hotplug_lock is general, so the
new ordering appears to be more appropriate from the overall
design viewpoint.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Filtering capabilities on my work email are pretty much non-existent and this
has turned out to be something of a firehose...
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This contains two Oops fixes (opti9xx and HD-audio) and a simple
fixup for an Acer laptop. All marked as stable patches.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=c73B
-----END PGP SIGNATURE-----
Merge tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This contains two Oops fixes (opti9xx and HD-audio) and a simple fixup
for an Acer laptop. All marked as stable patches"
* tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: opti9xx: Fix conflicting driver object name
ALSA: hda - Fix NULL dereference with CONFIG_SND_DYNAMIC_MINORS=n
ALSA: hda - Add inverted digital mic fixup for Acer Aspire One
Two straggling fixes that I had missed as they were posted a couple of
weeks ago, causing problems with interrupts (breaking them completely)
on the CSR SiRF platforms.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=dbsG
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Two straggling fixes that I had missed as they were posted a couple of
weeks ago, causing problems with interrupts (breaking them completely)
on the CSR SiRF platforms"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm: prima2: drop nr_irqs in mach as we moved to linear irqdomain
irqchip: sirf: move from legacy mode to linear irqdomain
Pull drm fixes from Dave Airlie:
"Since we are getting to the pointy end, one i915 black screen on some
machines, and one vmwgfx stop userspace ability to nuke the VM,
There might be one or two ati or nouveau fixes trickle in before
final, but I think this should pretty much be it"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/vmwgfx: Split GMR2_REMAP commands if they are to large
drm/i915: ivb: fix edp voltage swing reg val
Pull input layer updates from Dmitry Torokhov:
"Just a couple of new IDs in Wacom and xpad drivers, i8042 is now
disabled on ARC, and data checks in Elantech driver that were overly
relaxed by the previous patch are now tightened"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: i8042 - disable the driver on ARC platforms
Input: xpad - add signature for Razer Onza Classic Edition
Input: elantech - fix packet check for v3 and v4 hardware
Input: wacom - add support for 0x300 and 0x301
Commit dc975382 "net: fec: add napi support to improve proformance"
converted the fec driver to the napi model. However, that commit
forgot to remove the call to skb_defer_rx_timestamp which is only
needed in non-napi drivers.
(The function napi_gro_receive eventually calls netif_receive_skb,
which in turn calls skb_defer_rx_timestamp.)
This patch should also be applied to the 3.9 and 3.10 kernels.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While looking into MLDv1/v2 code, I noticed that bridging code does
not convert it's max delay into jiffies for MLDv2 messages as we do
in core IPv6' multicast code.
RFC3810, 5.1.3. Maximum Response Code says:
The Maximum Response Code field specifies the maximum time allowed
before sending a responding Report. The actual time allowed, called
the Maximum Response Delay, is represented in units of milliseconds,
and is derived from the Maximum Response Code as follows: [...]
As we update timers that work with jiffies, we need to convert it.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Linus Lüssing <linus.luessing@web.de>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Delete a "return" when commit the patch to a new kernel version
by mistake. So recover it.
Signed-off-by: wangyuhang <wangyuhang2014@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
If skb->len is too short then we should return an error. Otherwise we
read beyond the end of skb->data for several bytes.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 8728c544a9 ("net: dev_pick_tx() fix") and commit
b6fe83e952 ("bonding: refine IFF_XMIT_DST_RELEASE capability")
are quite incompatible : Queue selection is disabled because skb
dst was dropped before entering bonding device.
This causes major performance regression, mainly because TCP packets
for a given flow can be sent to multiple queues.
This is particularly visible when using the new FQ packet scheduler
with MQ + FQ setup on the slaves.
We can safely revert the first commit now that 416186fbf8
("net: Split core bits of netdev_pick_tx into __netdev_pick_tx")
properly caps the queue_index.
Reported-by: Xi Wang <xii@google.com>
Diagnosed-by: Xi Wang <xii@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <therbert@google.com>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Cc: Denys Fedorysychenko <nuclearcat@nuclearcat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 1f324e3887.
It seems to cause regressions, and in particular the output path
really depends upon there being a socket attached to skb->sk for
checks such as sk_mc_loop(skb->sk) for example. See ip6_output_finish2().
Reported-by: Stephen Warren <swarren@wwwdotorg.org>
Reported-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The User space I/O drivers are useful, only when user space meaningful
(MMU must be enabled).
So need let it depend on MMU, or can not pass compiling, the related
error (allmodconfig for H8300):
CC [M] drivers/uio/uio.o
drivers/uio/uio.c: In function 'uio_mmap_physical':
drivers/uio/uio.c:650:2: error: implicit declaration of function 'pgprot_noncached' [-Werror=implicit-function-declaration]
drivers/uio/uio.c:650:20: error: incompatible types when assigning to type 'pgprot_t' from type 'int'
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some of the defaults were missing or unclear. In particular, I suspect
the defaults were documented assuming there were still module parameters
and taking the default module parameters into account. Now, the defaults
are the values that will get chosen when the params passed to
dwc2_hcd_init are all -1.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The HWCFG4 register stores the supported utmi width values (8, 16 or
both). This commit reads that value and validates the configured value
against that.
If no (valid) value is given, the parameter defaulted to 8 bits
previously. However, the documentation for dwc2_core_params_struct
suggests that the default should have been 16. Also, the pci bindings
explicitely set the value to 16, so this commit changes the default to
16 bits (if supported, 8 bits otherwise).
With the default changed, the value set in pci.c is changed to -1 to
make it autodetected as well.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before, the hwcfg registers were read at device init time, but
interpreted at various parts in the code. This commit unpacks the hwcfg
register values into a struct with properly labeled variables at init
time, which makes all the other code using these values more consise and
easier to read. Some values that were previously stored in the hsotg
struct are now moved into this new struct as well.
In addition to the hwcfg registers, the contents of some fifo size
registers are also unpacked. The hwcfg registers are read-only, so they
can be safely stored. The fifo size registers are read-write registers,
but their power-on values are significant: they give the maximum depth
of the fifo they describe.
This commit mostly moves code, but also attempts to simplify some
expressions from (val >> shift) & (mask >> shift) to
(val & mask) >> shift.
Finally, all of the parameters read from the hardware are debug printed
after unpacking them, so a bunch of debug prints can be removed from
other places.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bits 16-31 are reserved, so the old code just reads the whole register to
get bits 0-15, assuming the reserved bits would be 0 (which seems true
on current hardware, but who knows...).
This commit properly masks out the reserved bits when reading and
doesn't touch the reserved bits while writing.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For calculating FIFO offsets, the sizes of preceding fifos need to be
known. For filling the GDFIFOCFG register, these fifo sizes were read
from hardware registers. However, these values were written to these
registers just a few lines before, so we can just use the values written
instead.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For some reason, the value of the HPTXFSIZ register was built in the
ptxfsiz variable, while there was also a hptxfsiz variable availble.
Better just use that and remove the (now unused) ptxfsiz variable.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The value of the hcchar register is built from individual values by
shifting and masking. Before, the debug output extracted the individual
values out of the complete hcchar register again by doing the reverse.
This commit makes the debug output use the original values instead.
One debug message got removed, since it would always print a fixed value
of zero.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This line extracted the available queue space without properly shifting
it. Since the code only cared wether it was zero or not, it worked as
expected without the shift, but adding shift makes the code cleaner.
While we're here, store the result in a helper variable that was already
declared to increase readability a bit more.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This (read-only) register was read twice, storing it for later use the
second time. Now it is only read once, storing it right away.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Various register fields wider than one bit have constants defined for
their value. Previously, these registers would define the values as they
appear in the register, so shifted to the right to the position the
value appears in the register.
This commit changes those constants to their natural values (e.g, 0, 1,
2, etc.), as they are after shifting the register value to the right.
This also changes all relevant code to shift the values before comparing
them with constants.
This has the advantage that the values can be stored in smaller
variables (now they always require a u32) and makes the handling of
these values more consistent with other register fields that represent
natural numbers instead of enumerations (e.g., number of host channels).
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Previously, the max_packet_count could be set to 1 << x, where x is the
number of bits available (width + 4 in the code). Since 1 << x requires
x + 1 bits to represent, this will not work. The real maximum value is
(1 << x) - 1. This value is already used the default when the set value
is invalid, but the upper limit for the set value was off-by-one.
This change makes the check the same as the one for max_transfer_size,
which was already correct.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A generic set of FIFOSIZE_* constants is defined which applies to all
fifo size and offset registers. It is already used for both the
GNPTXFSIZ and HPTXFSIZ registers, but it applies to DPTXFSIZN as well.
Some of these also had specific constants defined. This patch removes
the specific constants and documents to use the generic constants.
Note that the removed constants weren't actually used. Instead, most of
the related code uses hardcoded masks and shifts. But given that
subsequent patches will be moving that code around and introducing the
constants in the process, this patch leaves those untouched.
Also note that the GRXFSIZ register also contains a fifo size, but
there is no corresponding start address register (it is always the first
fifo in memory), the layout of the GRXFSIZ register is different and
cannot use the same constants.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 3d7b46cd20 (ip_tunnel: push generic protocol handling to
ip_tunnel module.), an Oops is triggered when an xfrm policy is configured on
an IPv4 over IPv4 tunnel.
xfrm4_policy_check() calls __xfrm_policy_check2(), which uses skb_dst(skb). But
this field is NULL because iptunnel_pull_header() calls skb_dst_drop(skb).
Signed-off-by: Li Hongjun <hongjun.li@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The slave_config is not initialized, so some of its fields may
be set with random data which may causes the failure in the following
dmaengine_prep_slave_sg().
This patch fixes this issue.
Signed-off-by: Huang Shijie <b32955@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Modify the probe routine to get the port line number
from device tree if the 'of_node' is populated in the
platform device. The driver can be built as module,
thus add an OF specific module device table as well
to support module auto loading.
This makes it possible to use the driver for AR9330
UART devices specified in device tree.
Cc: devicetree@vger.kernel.org
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Should a connect fail, if the publication/server is unavailable or
due to some other error, a positive value will be returned and errno
is never set. If the application code checks for an explicit zero
return from connect (success) or a negative return (failure), it
will not catch the error and subsequent send() calls will fail as
shown from the strace snippet below.
socket(0x1e /* PF_??? */, SOCK_SEQPACKET, 0) = 3
connect(3, {sa_family=0x1e /* AF_??? */, sa_data="\2\1\322\4\0\0\322\4\0\0\0\0\0\0"}, 16) = 111
sendto(3, "test", 4, 0, NULL, 0) = -1 EPIPE (Broken pipe)
The reason for this behaviour is that TIPC wrongly inverts error
codes set in sk_err.
Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
