Commit Graph

76 Commits

Author SHA1 Message Date
Alex Elder
0bed54dc9a rbd: rename some fields in struct rbd_dev
An rbd image is not a single object, but a logical construct made up
of an aggregation of objects.

Rename some fields in struct rbd_dev, in hopes of reinforcing this.
    obj         --> image_name
    obj_len     --> image_name_len
    obj_md_name --> header_name

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 09:30:06 -07:00
Alex Elder
0ce1a79413 rbd: use rbd_dev consistently
Most variables that represent a struct rbd_device are named
"rbd_dev", but in some cases "dev" is used instead.  Change all the
"dev" references so they use "rbd_dev" consistently, to make it
clear from the name that we're working with an RBD device (as
opposed to, for example, a struct device).  Similarly, change the
name of the "dev" field in struct rbd_notify_info to be "rbd_dev".

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 09:30:05 -07:00
Alex Elder
820a5f3e94 rbd: dynamically allocate snapshot name
There is no need to impose a small limit the length of the snapshot
name recorded for an rbd image in a struct rbd_dev.  Remove the
limitation by allocating space for the snapshot name dynamically.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 09:30:04 -07:00
Alex Elder
bf3e5ae112 rbd: dynamically allocate image name
There is no need to impose a small limit the length of the rbd image
name recorded in a struct rbd_dev.  Remove the limitation by
allocating space for the image name dynamically.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 09:30:04 -07:00
Alex Elder
cb8627c76d rbd: dynamically allocate image header name
There is no need to impose a small limit the length of the header
name recorded for an rbd image in a struct rbd_dev.  Remove the
limitation by allocating space for the header name dynamically.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 09:30:03 -07:00
Alex Elder
849b4260d4 rbd: dynamically allocate object prefix
There is no need to impose a small limit the length of the object
prefix recorded for an rbd image in a struct rbd_image_header.
Remove the limitation by allocating space for the object prefix
dynamically.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 09:30:02 -07:00
Alex Elder
d22f76e703 rbd: dynamically allocate pool name
There is no need to impose a small limit the length of the pool name
recorded for an rbd image in a struct rbd_device.  Remove the
limitation by allocating space for the pool name ynamically.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 09:30:01 -07:00
Alex Elder
9bb2f334b9 rbd: create pool_id device attribute
Add an entry under /sys/bus/rbd/devices/<N>/ named "pool_id" that
provides the id for the pool the rbd image is assocatied with.  This
is in addition to the pool name already provided.

Rename the "poolid" field in struct rbd_device  to be "pool_id".

Update the documentation to reflect the addition of this new entry.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 09:30:00 -07:00
Alex Elder
ca1e49a6af rbd: rename rbd_dev->block_name
Each rbd image has a name that forms the basis of all data objects
backing the device.  Old (format 1) images refer to this name as the
"block name," while new (format 2) images use the term "object
prefix" for this.

Change the field name in the in-core rbd image header structure to
reflect the more modern usage.  We intentionally keep the the name
"block_name" in the on-disk definition for format 1 image headers.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 09:29:59 -07:00
Alex Elder
ea3352f4aa rbd: define dup_token()
Define a new function dup_token(), to be used during argument
parsing for making dynamically-allocated copies of tokens being
parsed.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 09:29:58 -07:00
Alex Elder
ad4f232f28 rbd: drop a useless local variable
In rbd_req_sync_notify_ack(), a local variable was needlessly being
used to hold a null pointer.  Just pass NULL instead.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 09:29:56 -07:00
Dan Carpenter
895cfcc810 rbd: endian bug in rbd_req_cb()
Sparse complains about this because:
drivers/block/rbd.c:996:20: warning: cast to restricted __le32
drivers/block/rbd.c:996:20: warning: cast from restricted __le16

These are set in osd_req_encode_op() and they are le16.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Alex Elder <elder@inktank.com>
2012-06-06 09:23:54 -05:00
Yan, Zheng
f9f9a19044 rbd: Fix ceph_snap_context size calculation
ceph_snap_context->snaps is an u64 array

Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
Reviewed-by: Alex Elder <elder@inktank.com>
2012-06-06 09:23:53 -05:00
Josh Durgin
263c6ca007 rbd: rename __rbd_update_snaps to __rbd_refresh_header
This function rereads the entire header and handles any changes in
it, not just changes in snapshots.

Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: Alex Elder <elder@dreamhost.com>
Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2012-05-14 12:13:09 -05:00
Josh Durgin
3591538fb2 rbd: fix snapshot size type
Snapshot sizes should be the same type as regular image sizes. This
only affects their displayed size in sysfs, not the reported size of
an actual block device sizes.

Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: Alex Elder <elder@dreamhost.com>
Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2012-05-14 12:13:03 -05:00
Josh Durgin
b06e6a6be7 rbd: remove conditional snapid parameters
The snapid parameters passed to rbd_do_op() and rbd_req_sync_op()
are now always either a valid snapid or an explicit CEPH_NOSNAP.

[elder@dreamhost.com: Rephrased the description]

Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: Alex Elder <elder@dreamhost.com>
Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2012-05-14 12:12:58 -05:00
Josh Durgin
77dfe99fe3 rbd: store snapshot id instead of index
When a device was open at a snapshot, and snapshots were deleted or
added, data from the wrong snapshot could be read. Instead of
assuming the snap context is constant, store the actual snap id when
the device is initialized, and rely on the OSDs to signal an error
if we try reading from a snapshot that was deleted.

Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: Alex Elder <elder@dreamhost.com>
Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2012-05-14 12:12:52 -05:00
Josh Durgin
403f24d3d5 rbd: protect read of snapshot sequence number
This is updated whenever a snapshot is added or deleted, and the
snapc pointer is changed with every refresh of the header.

Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: Alex Elder <elder@dreamhost.com>
Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2012-05-14 12:12:46 -05:00
Xi Wang
50f7c4c967 rbd: fix integer overflow in rbd_header_from_disk()
ondisk->snap_count is read from disk via rbd_req_sync_read() and thus
needs validation.  Otherwise, a bogus `snap_count' could overflow the
kmalloc() size, leading to memory corruption.

Also use `u32' consistently for `snap_count'.

[elder@dreamhost.com: changed to use UINT_MAX rather than ULONG_MAX]

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Reviewed-by: Alex Elder <elder@dreamhost.com>
2012-05-14 12:12:41 -05:00
Dan Carpenter
f8ad495a8a rbd: use gfp_flags parameter in rbd_header_from_disk()
We should use the gfp_flags that the caller specified instead of
GFP_KERNEL here.

There is only one caller and it uses GFP_KERNEL, so this change is
just a cleanup and doesn't change how the code works.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Alex Elder <elder@dreamhost.com>
2012-05-14 12:12:35 -05:00
Sage Weil
3469ac1aa3 ceph: drop support for preferred_osd pgs
This was an ill-conceived feature that has been removed from Ceph.  Do
this gracefully:

 - reject attempts to specify a preferred_osd via the ioctl
 - stop exposing this information via virtual xattrs
 - always fill in -1 for requests, in case we talk to an older server
 - don't calculate preferred_osd placements/pgids

Reviewed-by: Alex Elder <elder@inktank.com>
Signed-off-by: Sage Weil <sage@inktank.com>
2012-05-07 15:33:36 -07:00
Alex Elder
cd9d9f5df6 rbd: don't hold spinlock during messenger flush
A recent change made changes to the rbd_client_list be protected by
a spinlock.  Unfortunately in rbd_put_client(), the lock is taken
before possibly dropping the last reference to an rbd_client, and on
the last reference that eventually calls flush_workqueue() which can
sleep.

The problem was flagged by a debug spinlock warning:
    BUG: spinlock wrong CPU on CPU#3, rbd/27814

The solution is to move the spinlock acquisition and release inside
rbd_client_release(), which is the spot where it's really needed for
protecting the removal of the rbd_client from the client list.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Reviewed-by: Sage Weil <sage@newdream.net>
2012-04-05 15:43:58 -05:00
Josh Durgin
c666601a93 rbd: move snap_rwsem to the device, rename to header_rwsem
A new temporary header is allocated each time the header changes, but
only the changed properties are copied over. We don't need a new
semaphore for each header update.

This addresses http://tracker.newdream.net/issues/2174

Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: Alex Elder <elder@dreamhost.com>
2012-03-22 10:47:52 -05:00
Alex Elder
32eec68d2f rbd: don't drop the rbd_id too early
Currently an rbd device's id is released when it is removed, but it
is done before the code is run to clean up sysfs-related files (such
as /sys/bus/rbd/devices/1).

It's possible that an rbd is still in use after the rbd_remove()
call has been made.  It's essentially the same as an active inode
that stays around after it has been removed--until its final close
operation.  This means that the id shows up as free for reuse at a
time it should not be.

The effect of this was seen by Jens Rehpoehler, who:
    - had a filesystem mounted on an rbd device
    - unmapped that filesystem (without unmounting)
    - found that the mount still worked properly
    - but hit a panic when he attempted to re-map a new rbd device

This re-map attempt found the previously-unmapped id available.
The subsequent attempt to reuse it was met with a panic while
attempting to (re-)install the sysfs entry for the new mapped
device.

Fix this by holding off "putting" the rbd id, until the rbd_device
release function is called--when the last reference is finally
dropped.

Note: This fixes: http://tracker.newdream.net/issues/1907

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:50 -05:00
Alex Elder
593a9e7b34 rbd: small changes
Here is another set of small code tidy-ups:
    - Define SECTOR_SHIFT and SECTOR_SIZE, and use these symbolic
      names throughout.  Tell the blk_queue system our physical
      block size, in the (unlikely) event we want to use something
      other than the default.
    - Delete the definition of struct rbd_info, which is never used.
    - Move the definition of dev_to_rbd() down in its source file,
      just above where it gets first used, and change its name to
      dev_to_rbd_dev().
    - Replace an open-coded operation in rbd_dev_release() to use
      dev_to_rbd_dev() instead.
    - Calculate the segment size for a given rbd_device just once in
      rbd_init_disk().
    - Use the '%zd' conversion specifier in rbd_snap_size_show(),
      since the value formatted is a size_t.
    - Switch to the '%llu' conversion specifier in rbd_snap_id_show().
      since the value formatted is unsigned.

Signed-off-by: Alex Elder <elder@dreamhost.com>
2012-03-22 10:47:50 -05:00
Alex Elder
00f1f36ffa rbd: do some refactoring
A few blocks of code are rearranged a bit here:
    - In rbd_header_from_disk():
	- Don't bother computing snap_count until we're sure the
	  on-disk header starts with a good signature.
	- Move a few independent lines of code so they are *after* a
	  check for a failed memory allocation.
	- Get rid of unnecessary local variable "ret".
    - Make a few other changes in rbd_read_header(), similar to the
      above--just moving things around a bit while preserving the
      functionality.
    - In rbd_rq_fn(), just assign rq in the while loop's controlling
      expression rather than duplicating it before and at the end of
      the loop body.  This allows the use of "continue" rather than
      "goto next" in a number of spots.
    - Rearrange the logic in snap_by_name().  End result is the same.

Signed-off-by: Alex Elder <elder@dreamhost.com>
2012-03-22 10:47:50 -05:00
Alex Elder
fed4c143ba rbd: fix module sysfs setup/teardown code
Once rbd_bus_type is registered, it allows an "add" operation via
the /sys/bus/rbd/add bus attribute, and adding a new rbd device that
way establishes a connection between the device and rbd_root_dev.
But rbd_root_dev is not registered until after the rbd_bus_type
registration is complete.  This could (in principle anyway) result
in an invalid state.

Since rbd_root_dev has no tie to rbd_bus_type we can reorder these
two initializations and never be faced with this scenario.

In addition, unregister the device in the event the bus registration
fails at module init time.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:50 -05:00
Alex Elder
7ef3214af2 rbd: don't allocate mon_addrs buffer in rbd_add()
The mon_addrs buffer in rbd_add is used to hold a copy of the
monitor IP addresses supplied via /sys/bus/rbd/add.  That is
passed to rbd_get_client(), which never modifies it (nor do
any of the functions it gets passed to thereafter)--the mon_addr
parameter to rbd_get_client() is a pointer to constant data, so it
can't be modifed.  Furthermore, rbd_get_client() has the length of
the mon_addrs buffer and that is used to ensure nothing goes beyond
its end.

Based on all this, there is no reason that a buffer needs to
be used to hold a copy of the mon_addrs provided via
/sys/bus/rbd/add.   Instead, the location within that passed-in
buffer can be provided, along with the length of the "token"
therein which represents the monitor IP's.

A small change to rbd_add_parse_args() allows the address within the
buffer to be passed back, and the length is already returned.  This
now means that, at least from the perspective of this interface,
there is no such thing as a list of monitor addresses that is too
long.

Signed-off-by: Alex Elder <elder@dreamhost.com>
2012-03-22 10:47:50 -05:00
Alex Elder
5214ecc45c rbd: have rbd_parse_args() report found mon_addrs size
The argument parsing routine already computes the size of the
mon_addrs buffer it extracts from the "command."  Pass it to the
caller so it can use it to provide the length to rbd_get_client().

Signed-off-by: Alex Elder <elder@dreamhost.com>
2012-03-22 10:47:49 -05:00
Alex Elder
81a8979378 rbd: do a few checks at build time
This is a bit gratuitous, but there are a few things that can be
verified at build time rather than run time, so do that.

Signed-off-by: Alex Elder <elder@dreamhost.com>
2012-03-22 10:47:49 -05:00
Alex Elder
e28fff268e rbd: don't use sscanf() in rbd_add_parse_args()
Make use of a few simple helper routines to parse the arguments
rather than sscanf().  This will treat both missing and too-long
arguments as invalid input (rather than silently truncating the
input in the too-long case).  In time this can also be used by
rbd_add() to use the passed-in buffer in place, rather than copying
its contents into new buffers.

It appears to me that the sscanf() previously used would not
correctly handle a supplied snapshot--the two final "%s" conversion
specifications were not separated by a space, and I'm not sure
how sscanf() handles that situation.  It may not be well-defined.
So that may be a bug this change fixes (but I didn't verify that).

The sizes of the mon_addrs and options buffers are now passed to
rbd_add_parse_args(), so they can be supplied to copy_token().

Signed-off-by: Alex Elder <elder@dreamhost.com>
2012-03-22 10:47:49 -05:00
Alex Elder
a725f65e52 rbd: encapsulate argument parsing for rbd_add()
Move the code that parses the arguments provided to rbd_add() (which
are supplied via /sys/bus/rbd/add) into a separate function.

Also rename the "mon_dev_name" variable in rbd_add() to be
"mon_addrs".   The variable represents a list of one or more
comma-separated monitor IP addresses, each with an optional port
number.  I think "mon_addrs" captures that notion a little better.

Signed-off-by: Alex Elder <elder@dreamhost.com>
2012-03-22 10:47:48 -05:00
Alex Elder
27cc25943f rbd: simplify error handling in rbd_add()
If a couple pointers are initialized to NULL then a single
"out_nomem" label can be used for all of the memory allocation
failure cases in rbd_add().

Also, get rid of the "irc" local variable there.  There is no
real need for "rc" to be type ssize_t, and it can be used in
the spot "irc" was.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:48 -05:00
Alex Elder
60571c7d55 rbd: reduce memory used for rbd_dev fields
The length of the string containing the monitor address
specification(s) will never exceed the length of the string passed
in to rbd_add().  The same holds true for the ceph + rbd options
string.  So reduce the amount of memory allocated for these to
that length rather than the maximum (1024 bytes).

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:48 -05:00
Alex Elder
d720bcb0a8 rbd: have rbd_get_client() return a rbd_client
Since rbd_get_client() currently returns an error code.  It assigns
the rbd_client field of the rbd_device structure it is passed if
successful.  Instead, have it return the created rbd_client
structure and return a pointer-coded error if there is an error.
This makes the assignment of the client pointer more obvious at the
call site.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:48 -05:00
Alex Elder
f0f8cef5a3 rbd: a few simple changes
Here are a few very simple cleanups:
    - Add a "RBD_" prefix to the two driver name string definitions.
    - Move the definition of struct rbd_request below struct rbd_req_coll
      to avoid the need for an empty declaration of the latter.
    - Move and group the definitions of rbd_root_dev_release() and
      rbd_root_dev, as well as rbd_bus_type and rbd_bus_attrs[],
      close to the top of the file.  Arrange the latter so
      rbd_bus_type.bus_attrs can be initialized statically.
    - Get rid of an unnecessary local variable in rbd_open().
    - Rework some hokey logic in rbd_bus_add_dev(), so the value of
      "ret" at the end is either 0 or -ENOENT to avoid the need for
      the code duplication that was there.
    - Rename a goto target in rbd_add().

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:48 -05:00
Alex Elder
432b858749 rbd: rename "node_lock"
The spinlock used to protect rbd_client_list is named "node_lock".
Rename it to "rbd_client_list_lock" to make it more obvious what
it's for.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:48 -05:00
Alex Elder
bc534d86be rbd: move ctl_mutex lock inside rbd_client_create()
Since rbd_client_create() is only called in one place, move the
acquisition of the mutex around that call inside that function.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:47 -05:00
Alex Elder
d97081b0c7 rbd: move ctl_mutex lock inside rbd_get_client()
Since rbd_get_client() is only called in one place, move the
acquisition of the mutex around that call inside that function.

Furthermore, within rbd_get_client(), it appears the mutex only
needs to be held while calling rbd_client_create().  (Moving
the lock inside that function will wait for the next patch.)

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:47 -05:00
Alex Elder
e6994d3dde rbd: release client list lock sooner
In rbd_get_client(), if a client is reused, a number of things
get done while still holding the list lock unnecessarily.

This just moves a few things that need no lock protection outside
the lock.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:47 -05:00
Alex Elder
d184f6bfde rbd: restore previous rbd id sequence behavior
It used to be that selecting a new unique identifier for an added
rbd device required searching all existing ones to find the highest
id is used.  A recent change made that unnecessary, but made it
so that id's used were monotonically non-decreasing.  It's a bit
more pleasant to have smaller rbd id's though, and this change
makes ids get allocated as they were before--each new id is one more
than the maximum currently in use.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:47 -05:00
Alex Elder
499afd5b8e rbd: tie rbd_dev_list changes to rbd_id operations
The only time entries are added to or removed from the global
rbd_dev_list is exactly when a "put" or "get" operation is being
performed on a rbd_dev's id.  So just move the list management code
into get/put routines.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:47 -05:00
Alex Elder
e124a82f3c rbd: protect the rbd_dev_list with a spinlock
The rbd_dev_list is just a simple list of all the current
rbd_devices.  Using the ctl_mutex as a concurrency guard is
overkill.  Instead, use a spinlock for that specific purpose.

This also reduces the window that the ctl_mutex needs to be held in
rbd_add().

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:47 -05:00
Alex Elder
1ddbe94eda rbd: rework calculation of new rbd id's
In order to select a new unique identifier for an added rbd device,
the list of all existing ones is searched and a value one greater
than the highest id is used.

The list search can be avoided by using an atomic variable that
keeps track of the current highest id.  Using a get/put model for
id's we can limit the boundless growth of id numbers a bit by
arranging to reuse the current highest id once it gets released.
Add these calls to "put" the id when an rbd is getting removed.

Note that this changes the pattern of device id's used--new values
will never be below the highest one seen so far (even if there
exists an unused lower one).  I assert this is OK because the key
property of an rbd id is its uniqueness, not its magnitude.

Regardless, a follow-on patch will restore the old way of doing
things, I just think this commit just makes the incremental change
to atomics a little easier to understand.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:47 -05:00
Alex Elder
b7f23c361b rbd: encapsulate new rbd id selection
Move the loop that finds a new unique rbd id to use into
its own helper function.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:47 -05:00
Josh Durgin
cc9d734c3d rbd: use a single value of snap_name to mean no snap
There's already a constant for this anyway.

Since rbd_header_set_snap() is only used to set the rbd device
snap_name field, just do that within that function rather than
having it take the snap_name as an argument.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>

v2: Changed interface rbd_header_set_snap() so it explicitly updates
    the snap_name in the rbd_device.  Also added a BUILD_BUG_ON()
    to verify the size of the snap_name field is sufficient for
    SNAP_HEAD_NAME.
2012-03-22 10:47:47 -05:00
Alex Elder
1dbb439913 rbd: do not duplicate ceph_client pointer in rbd_device
The rbd_device structure maintains a duplicate copy of the
ceph_client pointer maintained in its rbd_client structure.  There
appears to be no good reason for this, and its presence presents a
risk of them getting out of synch or otherwise misused.  So kill it
off, and use the rbd_client copy only.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:47 -05:00
Alex Elder
ee57741c52 rbd: make ceph_parse_options() return a pointer
ceph_parse_options() takes the address of a pointer as an argument
and uses it to return the address of an allocated structure if
successful.  With this interface is not evident at call sites that
the pointer is always initialized.  Change the interface to return
the address instead (or a pointer-coded error code) to make the
validity of the returned pointer obvious.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:47 -05:00
Alex Elder
2107978668 rbd: a few small cleanups
Some minor cleanups in "drivers/block/rbd.c:
    - Use the more meaningful "RBD_MAX_OBJ_NAME_LEN" in place if "96"
      in the definition of RBD_MAX_MD_NAME_LEN.
    - Use DEFINE_SPINLOCK() to define and initialize node_lock.
    - Drop a needless (char *) cast in parse_rbd_opts_token().
    - Make a few minor formatting changes.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:46 -05:00
Linus Torvalds
6c073a7ee2 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  rbd: fix safety of rbd_put_client()
  rbd: fix a memory leak in rbd_get_client()
  ceph: create a new session lock to avoid lock inversion
  ceph: fix length validation in parse_reply_info()
  ceph: initialize client debugfs outside of monc->mutex
  ceph: change "ceph.layout" xattr to be "ceph.file.layout"
2012-02-02 15:47:33 -08:00