This removes more dead code that was somehow missed by commit 0d99519efe
(writeback: remove unused nonblocking and congestion checks). There are
no behavior change except for the removal of two entries from one of the
ext4 tracing interface.
The nonblocking checks in ->writepages are no longer used because the
flusher now prefer to block on get_request_wait() than to skip inodes on
IO congestion. The latter will lead to more seeky IO.
The nonblocking checks in ->writepage are no longer used because it's
redundant with the WB_SYNC_NONE check.
We no long set ->nonblocking in VM page out and page migration, because
a) it's effectively redundant with WB_SYNC_NONE in current code
b) it's old semantic of "Don't get stuck on request queues" is mis-behavior:
that would skip some dirty inodes on congestion and page out others, which
is unfair in terms of LRU age.
Inspired by Christoph Hellwig. Thanks!
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: David Howells <dhowells@redhat.com>
Cc: Sage Weil <sage@newdream.net>
Cc: Steve French <sfrench@samba.org>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: (56 commits)
[CIFS] move close processing from cifs_close to cifsFileInfo_put
cifs: convert cifs_tcp_ses_lock from a rwlock to a spinlock
cifs: cancel_delayed_work() + flush_scheduled_work() -> cancel_delayed_work_sync()
Clean up two declarations of blob_len
cifs: move cifsFileInfo_put to file.c
cifs: convert GlobalSMBSeslock from a rwlock to regular spinlock
[CIFS] Fix minor checkpatch warning and update cifs version
cifs: move cifs_new_fileinfo to file.c
cifs: eliminate pfile pointer from cifsFileInfo
cifs: cifs_write argument change and cleanup
cifs: clean up cifs_reopen_file
cifs: eliminate the inode argument from cifs_new_fileinfo
cifs: eliminate oflags option from cifs_new_fileinfo
cifs: fix flags handling in cifs_posix_open
cifs: eliminate cifs_posix_open_inode_helper
cifs: handle FindFirst failure gracefully
NTLM authentication and signing - Calculate auth response per smb session
cifs: don't use vfsmount to pin superblock for oplock breaks
cifs: keep dentry reference in cifsFileInfo instead of inode reference
cifs: on multiuser mount, set ownership to current_fsuid/current_fsgid (try #7)
...
Fix up trivial conflict in fs/cifs/cifsfs.c due to added/removed header files
* 'vfs' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: (30 commits)
BKL: remove BKL from freevxfs
BKL: remove BKL from qnx4
autofs4: Only declare function when CONFIG_COMPAT is defined
autofs: Only declare function when CONFIG_COMPAT is defined
ncpfs: Lock socket in ncpfs while setting its callbacks
fs/locks.c: prepare for BKL removal
BKL: Remove BKL from ncpfs
BKL: Remove BKL from OCFS2
BKL: Remove BKL from squashfs
BKL: Remove BKL from jffs2
BKL: Remove BKL from ecryptfs
BKL: Remove BKL from afs
BKL: Remove BKL from USB gadgetfs
BKL: Remove BKL from autofs4
BKL: Remove BKL from isofs
BKL: Remove BKL from fat
BKL: Remove BKL from ext2 filesystem
BKL: Remove BKL from do_new_mount()
BKL: Remove BKL from cgroup
BKL: Remove BKL from NTFS
...
Now that it's feasible for a cifsFileInfo to outlive the filp under
which it was created, move the close processing into cifsFileInfo_put.
This means that the last user of the filehandle always does the actual
on the wire close call. This also allows us to get rid of the closePend
flag from cifsFileInfo. If we have an active reference to the file
then it's never going to have a close pending.
cifs_close is converted to simply put the filehandle.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
cifs_tcp_ses_lock is a rwlock with protects the cifs_tcp_ses_list,
server->smb_ses_list and the ses->tcon_list. It also protects a few
ref counters in server, ses and tcon. In most cases the critical section
doesn't seem to be large, in a few cases where it is slightly large, there
seem to be really no benefit from concurrent access. I briefly considered RCU
mechanism but it appears to me that there is no real need.
Replace it with a spinlock and get rid of the last rwlock in the cifs code.
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
flush_scheduled_work() is going away.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
- Eliminate double declaration of variable blob_len
- Modify function build_ntlmssp_auth_blob to return error code
as well as length of the blob.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
...and make it non-inlined in preparation for the move of most of
cifs_close to it.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Convert this lock to a regular spinlock
A rwlock_t offers little value here. It's more expensive than a regular
spinlock unless you have a fairly large section of code that runs under
the read lock and can benefit from the concurrency.
Additionally, we need to ensure that the refcounting for files isn't
racy and to do that we need to lock areas that can increment it for
write. That means that the areas that can actually use a read_lock are
very few and relatively infrequently used.
While we're at it, change the name to something easier to type, and fix
a bug in find_writable_file. cifsFileInfo_put can sleep and shouldn't be
called while holding the lock.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
It's currently in dir.c which makes little sense...
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Acked-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
All the remaining users of cifsFileInfo->pfile just use it to get
at the f_flags/f_mode. Now that we store that separately in the
cifsFileInfo, there's no need to consult the pfile at all from
a cifsFileInfo pointer.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Acked-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Have cifs_write take a cifsFileInfo pointer instead of a filp. Since
cifsFileInfo holds references on the dentry, and that holds one to
the inode, we can eliminate some unneeded NULL pointer checks.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Acked-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Add a f_flags field that holds the f_flags field from the filp. We'll
need this info in case the filp ever goes away before the cifsFileInfo
does. Have cifs_reopen_file use that value instead of filp->f_flags
too and have it take a cifsFileInfo arg instead of a filp.
While we're at it, get rid of some bogus cargo-cult NULL pointer
checks in that function and reduce the level of indentation.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Acked-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
It already takes a file pointer. The inode associated with that had damn
well better be the same one we're passing in anyway. Thus, there's no
need for a separate argument here.
Also, get rid of the bogus check for a null pCifsInode pointer. The
CIFS_I macro uses container_of(), and that will virtually never return a
NULL pointer anyway.
Finally, move the setting of the canCache* flags outside of the lock.
Other places in the code don't hold that lock when setting it, so I
assume it's not really needed here either.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Acked-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Eliminate the poor, misunderstood "oflags" option from cifs_new_fileinfo.
The callers mostly pass in the filp->f_flags here.
That's not correct however since we're checking that value for
the presence of FMODE_READ. Luckily that only affects how the f_list is
ordered. What it really wants here is the file->f_mode. Just use that
field from the filp to determine it.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
The way flags are passed and converted for cifs_posix_open is rather
non-sensical. Some callers call cifs_posix_convert_flags on the flags
before they pass them to cifs_posix_open, whereas some don't. Two flag
conversion steps is just confusing though.
Change the function instead to clearly expect input in f_flags format,
and fix the callers to pass that in. Then, have cifs_posix_open call
cifs_convert_posix_flags to do the conversion. Move cifs_posix_open to
file.c as well so we can keep cifs_convert_posix_flags as a static
function.
Fix it also to not ignore O_CREAT, O_EXCL and O_TRUNC, and instead have
cifs_reopen_file mask those bits off before calling cifs_posix_open.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
cifs: eliminate cifs_posix_open_inode_helper
This function is redundant. The only thing it does is set the canCache
flags, but those get set in cifs_new_fileinfo anyway.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Acked-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
FindFirst failure due to permission errors or any other errors are silently
ignored by cifs_readdir(). This could cause problem to applications that depend
on the error to do further processing.
Reproducer:
- mount a cifs share
- mkdir tdir;touch tdir/1 tdir/2 tdir/3
- chmod -x tdir
- ls tdir
Currently, we start calling filldir() for '.' and '..' before we know we
whether FindFirst could succeed or not. If FindFirst fails later, there is no
way to notify VFS by setting buf.error and so VFS won't be able to catch this.
Fix this by moving the call to initiate_cifs_search() before we start doing
filldir().
This fixes https://bugzilla.samba.org/show_bug.cgi?id=7535
Reported-by: Tom Dexter <digitalaudiorock@gmail.com>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Start calculation auth response within a session. Move/Add pertinet
data structures like session key, server challenge and ntlmv2_hash in
a session structure. We should do the calculations within a session
before copying session key and response over to server data
structures because a session setup can fail.
Only after a very first smb session succeeds, it copies/makes its
session key, session key of smb connection. This key stays with
the smb connection throughout its life.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Filesystems aren't really supposed to do anything with a vfsmount. It's
considered a layering violation since vfsmounts are entirely managed at
the VFS layer.
CIFS currently keeps an active reference to a vfsmount in order to
prevent the superblock vanishing before an oplock break has completed.
What we really want to do instead is to keep sb->s_active high until the
oplock break has completed. This patch borrows the scheme that NFS uses
for handling sillyrenames.
An atomic_t is added to the cifs_sb_info. When it transitions from 0 to
1, an extra reference to the superblock is taken (by bumping the
s_active value). When it transitions from 1 to 0, that reference is
dropped and a the superblock teardown may proceed if there are no more
references to it.
Also, the vfsmount pointer is removed from cifsFileInfo and from
cifs_new_fileinfo, and some bogus forward declarations are removed from
cifsfs.h.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Acked-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
cifsFileInfo is a bit problematic. It contains a reference back to the
struct file itself. This makes it difficult for a cifsFileInfo to exist
without a corresponding struct file.
It would be better instead of the cifsFileInfo just held info pertaining
to the open file on the server instead without any back refrences to the
struct file. This would allow it to exist after the filp to which it was
originally attached was closed.
Much of the use of the file pointer in this struct is to get at the
dentry. Begin divorcing the cifsFileInfo from the struct file by
keeping a reference to the dentry. Since the dentry will have a
reference to the inode, we can eliminate the "pInode" field too and
convert the igrab/iput to dget/dput.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Acked-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
commit 3aa1c8c290 made cifs_getattr set
the ownership of files to current_fsuid/current_fsgid when multiuser
mounts were in use and when mnt_uid/mnt_gid were non-zero.
It should have instead based that decision on the
CIFS_MOUNT_OVERR_UID/GID flags.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Build an av pair blob as part of ntlmv2 (without extended security) auth
request. Include netbios and dns names for domain and server and
a timestamp in the blob.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
find_domain_name() uses load_nls_default which takes a module reference
on the appropriate NLS module, but doesn't put it.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Cc: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Create a workqueue job that cleans out unused tlinks. For now, it uses
a hardcoded expire time of 10 minutes. When it's done, the work rearms
itself. On umount, the work is cancelled before tearing down the tlink
tree.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
...when unix extensions aren't enabled. This makes everything on the
mount appear to be owned by the current user.
This version of the patch differs from previous versions however in that
the admin can still force the ownership of all files to appear as a
single user via the uid=/gid= options.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
This allows someone to declare a mount as a multiuser mount.
Multiuser mounts also imply "noperm" since we want to allow the server
to handle permission checking. It also (for now) requires Kerberos
authentication. Eventually, we could expand this to other authtypes, but
that requires a scheme to allow per-user credential stashing in some
form.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
This patch is rather large, but it's a bit difficult to do piecemeal...
For non-multiuser mounts, everything will basically work as it does
today. A call to cifs_sb_tlink will return the "master" tcon link.
Turn the tcon pointer in the cifs_sb into a radix tree that uses the
fsuid of the process as a key. The value is a new "tcon_link" struct
that contains info about a tcon that's under construction.
When a new process needs a tcon, it'll call cifs_sb_tcon. That will
then look up the tcon_link in the radix tree. If it exists and is
valid, it's returned.
If it doesn't exist, then we stuff a new tcon_link into the tree and
mark it as pending and then go and try to build the session/tcon.
If that works, the tcon pointer in the tcon_link is updated and the
pending flag is cleared.
If the construction fails, then we set the tcon pointer to an ERR_PTR
and clear the pending flag.
If the radix tree is searched and the tcon_link is marked pending
then we go to sleep and wait for the pending flag to be cleared.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Fix incorrect calculation of case sensitive response length in the
ntlmv2 (without extended security) response.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
When we implement multiuser mounts, we'll need to filter filehandles
by fsuid. Add a flag for multiuser mounts and code to filter by
fsuid when it's set.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
cifsFileInfo needs a pointer to a tcon, but it doesn't currently hold a
reference to it. Change it to keep a pointer to a tcon_link instead and
hold a reference to it.
That will keep the tcon from being freed until the file is closed.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Eventually, we'll need to track the use of tcons on a per-sb basis, so that
we know when it's ok to tear them down. Begin this conversion by adding a
new "tcon_link" struct and accessors that get it. For now, the core data
structures are untouched -- cifs_sb still just points to a single tcon and
the pointers are just cast to deal with the accessor functions. A later
patch will flesh this out.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
This prepares the removal of the big kernel lock from the
file locking code. We still use the BKL as long as fs/lockd
uses it and ceph might sleep, but we can flip the definition
to a private spinlock as soon as that's done.
All users outside of fs/lockd get converted to use
lock_flocks() instead of lock_kernel() where appropriate.
Based on an earlier patch to use a spinlock from Matthew
Wilcox, who has attempted this a few times before, the
earliest patch from over 10 years ago turned it into
a semaphore, which ended up being slower than the BKL
and was subsequently reverted.
Someone should do some serious performance testing when
this becomes a spinlock, since this has caused problems
before. Using a spinlock should be at least as good
as the BKL in theory, but who knows...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Miklos Szeredi <mszeredi@suse.cz>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Sage Weil <sage@newdream.net>
Cc: linux-kernel@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
The BKL is only used in put_super and fill_super that are both protected by
the superblocks s_umount rw_semaphore. Therefore it is safe to remove the
BKL entirely.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Cc: Steve French <smfrench@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch is a preparation necessary to remove the BKL from do_new_mount().
It explicitly adds calls to lock_kernel()/unlock_kernel() around
get_sb/fill_super operations for filesystems that still uses the BKL.
I've read through all the code formerly covered by the BKL inside
do_kern_mount() and have satisfied myself that it doesn't need the BKL
any more.
do_kern_mount() is already called without the BKL when mounting the rootfs
and in nfsctl. do_kern_mount() calls vfs_kern_mount(), which is called
from various places without BKL: simple_pin_fs(), nfs_do_clone_mount()
through nfs_follow_mountpoint(), afs_mntpt_do_automount() through
afs_mntpt_follow_link(). Both later functions are actually the filesystems
follow_link inode operation. vfs_kern_mount() is calling the specified
get_sb function and lets the filesystem do its job by calling the given
fill_super function.
Therefore I think it is safe to push down the BKL from the VFS to the
low-level filesystems get_sb/fill_super operation.
[arnd: do not add the BKL to those file systems that already
don't use it elsewhere]
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Christoph Hellwig <hch@infradead.org>
cifs_reconnect_tcon is called from smb_init. After a successful
reconnect, cifs_reconnect_tcon will call reset_cifs_unix_caps. That
function will, in turn call CIFSSMBQFSUnixInfo and CIFSSMBSetFSUnixInfo.
Those functions also call smb_init.
It's possible for the session and tcon reconnect to succeed, and then
for another cifs_reconnect to occur before CIFSSMBQFSUnixInfo or
CIFSSMBSetFSUnixInfo to be called. That'll cause those functions to call
smb_init and cifs_reconnect_tcon again, ad infinitum...
Break the infinite recursion by having those functions use a new
smb_init variant that doesn't attempt to perform a reconnect.
Reported-and-Tested-by: Michal Suchanek <hramrach@centrum.cz>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Testing on very recent kernel (2.6.36-rc6) made this warning pop:
WARNING: at fs/fs-writeback.c:87 inode_to_bdi+0x65/0x70()
Hardware name:
Dirtiable inode bdi default != sb bdi cifs
...the following patch fixes it and seems to be the obviously correct
thing to do for cifs.
Cc: stable@kernel.org
Acked-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Get a reference to the file early so we can eventually base the decision
about signing on the correct tcon. If that doesn't work for some reason,
then fall back to generic_writepages. That's just as likely to fail, but
it simplifies the error handling.
In truth, I'm not sure how that could occur anyway, so maybe a NULL
open_file here ought to be a BUG()?
After that, we drop the reference to the open_file and then we re-get
one prior to each WriteAndX call. This helps ensure that the filehandle
isn't held open any longer than necessary and that open files are
reclaimed prior to each write call.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
To minimize calls to cifs_sb_tcon and to allow for a clear error path if
a tcon can't be acquired.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
At mount time, we'll always need to create a tcon that will serve as a
template for others that are associated with the mount. This tcon is
known as the "master" tcon.
In some cases, we'll need to use that tcon regardless of who's accessing
the mount. Add an accessor function for the master tcon and go ahead and
switch the appropriate places to use it.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
When we convert cifs to do multiple sessions per mount, we'll need more
than one tcon per superblock. At that point "cifs_sb->tcon" will make
no sense. Add a new accessor function that gets a tcon given a cifs_sb.
For now, it just returns cifs_sb->tcon. Later it'll do more.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
If registering fs cache failed, we weren't cleaning up proc.
Acked-by: Jeff Layton <jlayton@redhat.com>
CC: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
