No need for this struct and its allocations, we can just use the
->build_id member we already have in struct dso, then ask for it
to be read, and later traverse the dsos list, writing the
buildid table to the perf.data file.
As a bonus, one more die() function got killed.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258582853-8579-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we read the build_id from the DSO name to then index into
/usr/lib/debug/.buildid/DSO_BUILD_ID[0:2]/DSO_BUILD_ID[2:], we
were jumping directly to the comparision with the buildid we
already have in dso->build_id (that came from the perf.data
build_id section, collected at perf record time)
unconditionally, even if we didn't had recorded it, and
furthermore, comparing a formatted buildid with a rawbuildid, yikes.
Fix it by deleting the dso__read_build_id() function, that was
really misdesigned anyway, and do the necessary checks and
correct comparison of raw buildids.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258582853-8579-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
'perf bench mem memcpy' is a benchmark suite for measuring memcpy()
performance.
Example on a Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz:
| % perf bench mem memcpy -l 1GB
| # Running mem/memcpy benchmark...
| # Copying 1MB Bytes from 0xb7d98008 to 0xb7e99008 ...
|
| 726.216412 MB/Sec
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1258471212-30281-1-git-send-email-mitake@dcl.info.waseda.ac.jp>
[ v2: updated changelog, clarified history of builtin-bench.c ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Defer to parse_source() time allocating it.
Now we use about this much memory:
1724 root 20 0 42104 10m 940 S 0.0 0.4 0:00.23 perf
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258490282-1821-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We pre-calculate the symbol name length, then after we sort the
entries to print, calculate the biggest one and use that for the
symbol name width justification, then use the
dso->long_name->len to justificate the DSO name, deciding whether
using the short or long name depending on how much space we have
on the terminal.
IOW give as much info to the user as the terminal width allows.
Suggested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258479655-28662-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Using a two bytes hole we already had and since we also need to
calculate this strlen for fetching the buildids. We'll use it in
'perf top' to auto-adjust the output based on the terminal
width.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258479655-28662-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Compiler on ia64 rejects the "-m64" option.
Add arch specific pieces to perf.h
Signed-off-by: Tony Luck <tony.luck@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4b02d7f43514327a@agluck-desktop.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This makes it possible to build perf statically, by
performing:
make LDFLAGS=-static
Since static libraries are only searched in the order they are
specified, move library list from LDFLAGS to EXTLIBS, so that
they are put at the end of linker command line.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091029152002.GA5406@redhat.com>
[ v2: resolved conflicts ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Propagate the errors instead, the users are the ones to decide
what to do if a library call fails.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258427892-16312-4-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Propagate the errors instead, the users are the ones to decide
what to do if a library call fails.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258427892-16312-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Propagate the errors instead, the users are the ones to decide
what to do if a library call fails.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258427892-16312-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Propagate the errors instead, the users are the ones to decide
what to do if a library call fails.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258427892-16312-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Porcelain can ignore it, humans can make more sense of it.
Suggested-by: Frederic Weisbecker <fweisbec@gmail.com>
Suggested-by: Ingo Molnar <mingo@elte.hu>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258415125-15019-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Default continues to be showing all symbols. 'K' and 'U' can be
used to toggle showing kernel and user symbols.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258415125-15019-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
By querying the current number of rows, if the user specifies
the number of entries, use that instead. If the user uses the
'e' command to change the number of lines 0 will mean do it
automatically, any other number disables the auto resizing.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258407027-384-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We really should propagate such kinds of errors so that users of
these library functions decide what to do in such cases instead
of exiting in random places like now.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258407027-384-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
With this we can list the buildids in a perf.data file so that
we can pipe them to other, distro specific tools that from the
buildids can figure out separate packages (foo-debuginfo) where
we can find the matching symtabs so that perf report can do its
job.
E.g:
[acme@doppio linux-2.6-tip]$ perf buildid-list | head -5
8e08b117e5458ad3f85da16d42d0fc5cd21c5869
520c2387a587cc5acfcf881e27dba1caaeab4b1f
ec8dd400904ddfcac8b1c343263a790f977159dc
7caedbca5a6d8ab39a7fe44bd28c07d3e14a3f3f
379bb828fd08859dbea73279f04abefabc95a6a3
[acme@doppio linux-2.6-tip]$ perf buildid-list -v | head -5
8e08b117e5458ad3f85da16d42d0fc5cd21c5869 /sbin/init
520c2387a587cc5acfcf881e27dba1caaeab4b1f /lib64/ld-2.10.1.so
ec8dd400904ddfcac8b1c343263a790f977159dc /lib64/libc-2.10.1.so
7caedbca5a6d8ab39a7fe44bd28c07d3e14a3f3f /sbin/udevd
379bb828fd08859dbea73279f04abefabc95a6a3 /lib64/libdl-2.10.1.so
[acme@doppio linux-2.6-tip]$
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258396365-29217-5-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
To print the buildids in the list of dsos. Will be used by 'perf
buildid-list'
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258396365-29217-4-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Renaming it to perf_header__process_sections() and passing a
callback to handle each feature.
The next changesets will introduce 'perf buildid-list' that will
handle just the HEADER_BUILD_ID table, ignoring all the other
features.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258396365-29217-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We need to pass the symbol to the filter so that, for instance,
'perf top' can do filtering and also set the private area it
manages, setting the ->map pointer, etc.
I found this while running 'perf top' on a machine where hits
happened on PLT symbols, where ->map wasn't being set up and
segfaults thus happened.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258386491-20278-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The ratio between the number of events and the time elapsed makes
sense only if task-clock event is counted. Otherwise it will be
simply a (confusing)
# 0.000 M/sec
This patch outputs the ratio only if task-clock event is counted.
Some test examples of before and after:
Before:
[lucas@skywalker linux.trees.git]$ sudo perf stat -e branch-misses -a -- sleep 1
Performance counter stats for 'sleep 1':
1367818 branch-misses # 0.000 M/sec
1.001494325 seconds time elapsed
After (without task-clock):
[lucas@skywalker perf]$ sudo ./perf stat -e branch-misses -a -- sleep 1
Performance counter stats for 'sleep 1':
1135044 branch-misses
1.001370775 seconds time elapsed
After (with task-clock):
[lucas@skywalker perf]$ sudo ./perf stat -e branch-misses -e task-clock -a -- sleep 1
Performance counter stats for 'sleep 1':
1070111 branch-misses # 0.534 M/sec
2002.730893 task-clock-msecs # 1.999 CPUs
1.001640292 seconds time elapsed
Signed-off-by: Lucas De Marchi <lucas.de.marchi@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091115140507.GB21561@skywalker.lan>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch modifies util/string.[ch] to add new function:
perf_atoll() to parse string representing size in bytes.
This function parses (\d+)(b|B|kb|KB|mb|MB|gb|GB) (e.g. "256MB")
and returns its numeric value. (e.g. 268435456)
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1258285013-4759-1-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Some architectures (e.g. Alpha) do not support the
-fstack-protector-all compiler option and the use of the option
with -Werror causes the compiler to abort and the build fails.
Test that the compiler supports -fstack-protector-all before
inclusion in CFLAGS.
Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20091111074302.GA3728@omega>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Build a set of section headers for features right after the
datas. Each implemented feature will have one of such section
header that provides the offset and the size of the data
manipulated by the feature.
The trace informations have moved after the data and are
recorded on exit time.
The new layout is as follows:
-----------------------
___
[ magic ] |
[ header size ] |
[ attr size ] |
[ attr content offset ] |
[ attr content size ] |
[ data offset ] File Headers
[ data size ] |
[ event_types offset ] |
[ event_types size ] |
[ feature bitmap ] v
[ attr section ]
[ events section ]
___
[ X ] |
[ X ] |
[ X ] Datas
[ X ] |
[ X ] v
___
[ Feature 1 offset ] |
[ Feature 1 size ] Features headers
[ Feature 2 offset ] |
[ Feature 2 size ] v
[ Feature 1 content ]
[ Feature 2 content ]
-----------------------
We have as many feature's section headers as we have features in
use for the current file.
Say Feat 1 and Feat 3 are used by the file, but not Feat 2. Then
the feature headers will be like follows:
[ Feature 1 offset ] |
[ Feature 1 size ] Features headers
[ Feature 3 offset ] |
[ Feature 3 size ] v
There is no hole to cover Feature 2 that is not in use here. We
only need to cover the needed headers in order, from the lowest
feature bit to the highest.
Currently we have two features: HEADER_TRACE_INFO and
HEADER_BUILD_ID. Both have their contents that follow the
feature headers. Putting the contents right after the feature
headers is not mandatory though. While we keep the feature
headers right after the data and in order, their offsets can
point everywhere. We have just put the two above feature
contents in the end of the file for convenience.
The purpose of this layout change is to have a file format that
scales while keeping it simple: having such linear feature
headers is less error prone wrt forward/backward compatibility
as the content of a feature can be put anywhere, its location
can even change by the time, it's fine because its headers will
tell where it is. And we know how to find these headers,
following the above rules.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
LKML-Reference: <1257911467-28276-6-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
And drop the alternate checks/sets using set_bit or other kind
of helpers.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
LKML-Reference: <1257911467-28276-5-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Keep the build-ids reading implementation in the data mapping
but move its call to the headers so that we have a better
control on it (offset seeking, size passing, etc..).
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
LKML-Reference: <1257911467-28276-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We are saving the build id once we stop the profiling. And only
after doing that we know if we need to set that feature in the
header through the feature bitmap.
But if we want a proper feature support in the headers, using a
rule of offset/size pairs in sections, we need to know in
advance how many features we need to set in the headers, so that
we can reserve rooms for their section headers.
The current state doesn't allow that, as it forces us to first
save the build-ids to the file right after the datas instead of
planning any structured layout.
That's why this splits up the build-ids processing in two parts:
one that fetches the build-ids from the Dso objects, and one
that saves them into the file.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
LKML-Reference: <1257911467-28276-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
So that it makes easier to control it. Especially because we
plan to give it a feature section.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
LKML-Reference: <1257911467-28276-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Don't forget to also synthetize the targeted process from perf
record or we'll miss its dso in the events and then we won't be
able to deal with its build-id.
We are missing it because it is created after the existing
synthetized tasks but before the counters are enabled and can
send its mapping event.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
LKML-Reference: <1257911467-28276-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch improves sched-message.c with more comfortable output.
Change points are comment style description and
formatting numerical values and its units.
Example:
| % perf bench sched messaging
| # Running sched/messaging benchmark...
| # 20 sender and receiver processes per group
| # 10 groups == 400 processes run
|
| Total time: 1.490 [sec]
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1257865442-20252-4-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
This patch makes output of perf bench more friendly.
Current style of putput, keeping user wait
and printing everything suddenly when we finish,
may confuse users.
So I improved it:
| % perf bench sched messaging
| # Running sched/messaging benchmark... <- printed right after invocation
| # 20 sender and receiver processes per group
| # 10 groups == 400 processes run
|
| Total time: 1.476 [sec]
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1257865442-20252-2-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch modifies command-list.txt for the entry of
perf-bench. So perf will show 'bench' in command list.
Example:
% perf
usage: perf [--version] [--help] COMMAND [ARGS]
The most commonly used perf commands are:
annotate Read perf.data (created by perf record) and display annotated code
bench General framework for benchmark suites
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
list List all symbolic event types
probe Define new dynamic tracepoints
record Run a command and record its profile into perf.data
report Read perf.data (created by perf record) and display the profile
sched Tool to trace/measure scheduler properties (latencies)
stat Run a command and gather performance counter statistics
timechart Tool to visualize total system behavior during a workload
top System profiling tool.
trace Read perf.data (created by perf record) and display trace output
See 'perf help COMMAND' for more information on a specific command.
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1257853855-28934-4-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds new document about perf-bench.
Man page and html will be provided for user.
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1257853855-28934-3-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Clean up initializers in bench.h:
- No need to break the line for function prototypes, they are more
readable in a single line. (even if checkpatch complains about it
- We try to align definitions / structure fields vertically,
to make it all a bit more readable.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1257853855-28934-2-git-send-email-mitake@dcl.info.waseda.ac.jp>
This patch modifies builtin-pipe.c for processing common
options. The first option added is "--format".
Users of perf bench will be able to specify output style by
--format.
Usage example:
% ./perf bench sched pipe # with no style specify
(executing 1000000 pipe operations between two tasks)
Total time:5.855 sec
5.855061 usecs/op
170792 ops/sec
% ./perf bench --format=simple sched pipe # specified simple
5.988
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1257808802-9420-5-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
This patch modifies builtin-bench.c for processing common
options. The first option added is "--format".
Users of perf bench will be able to specify output style by
--format.
Usage example:
% ./perf bench sched messaging # with no style specify
(20 sender and receiver processes per group)
(10 groups == 400 processes run)
Total time:1.431 sec
% ./perf bench --format=simple sched messaging # specified
simple 1.431
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1257808802-9420-3-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds some constants and extern declaration to
bench.h. These are used for unified output formatting
of 'perf bench'.
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1257808802-9420-2-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo reported this small 'perf bench sched pipe' output problem:
| $ ./perf bench sched pipe
| (executing 1000000 pipe operations between two tasks)
|
| Total time:4.898 sec
| $ 4.898586 usecs/op
| 204140 ops/sec
|
| the shell prompt came back before the usecs/op and ops/sec line
| was printed. Process teardown race, lack of wait() or so?
This caused by lack of calling waitpid() by parent process,
so I added it.
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Kosina <jkosina@suse.cz>
LKML-Reference: <1257737465-7546-1-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
modify perf.c get_debugfs_mntpnt() to use the util/debugfs.c
debugfs_find_mountpoint()
modify util/parse-events.c to use debugfs_valid_mountpoint().
Signed-off-by: Clark Williams <williams@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20091101155720.624cc87e@torg>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add routines to locate the debugfs mount point and to manage the
mounting and unmounting of the debugfs.
Signed-off-by: Clark Williams <williams@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20091101155621.2b3503ee@torg>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The perf_event_open() system call returns EACCES if the user is
not root which results in a very confusing error message:
$ perf record -A -a -f
Error: perfcounter syscall returned with -1 (Permission denied)
Fatal: No CONFIG_PERF_EVENTS=y kernel support configured?
It turns out that's because perf tools are checking only for
EPERM. Fix that up to get a much better error message:
$ perf record -A -a -f
Fatal: Permission error - are you root?
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1257696066-4046-1-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
With this change 'perf record' will intercept PERF_RECORD_MMAP
calls, creating a linked list of DSOs, then when the session
finishes, it will traverse this list and read the buildids,
stashing them at the end of the file and will set up a new
feature bit in the header bitmask.
'perf report' will then notice this feature and populate the
'dsos' list and set the build ids.
When reading the symtabs it will refuse to load from a file that
doesn't have the same build id. This improves the
reliability of the profiler output, as symbols and profiling
data is more guaranteed to match.
Example:
[root@doppio ~]# perf report | head
/home/acme/bin/perf with build id b1ea544ac3746e7538972548a09aadecc5753868 not found, continuing without symbols
# Samples: 2621434559
#
# Overhead Command Shared Object Symbol
# ........ ............... ............................. ......
#
7.91% init [kernel] [k] read_hpet
7.64% init [kernel] [k] mwait_idle_with_hints
7.60% swapper [kernel] [k] read_hpet
7.60% swapper [kernel] [k] mwait_idle_with_hints
3.65% init [kernel] [k] 0xffffffffa02339d9
[root@doppio ~]#
In this case the 'perf' binary was an older one, vanished,
so its symbols probably wouldn't match or would cause subtly
different (and misleading) output.
Next patches will support the kernel as well, reading the build
id notes for it and the modules from /sys.
Another patch should also introduce a new plumbing command:
'perf list-buildids'
that will then be used in porcelain that is distro specific to
fetch -debuginfo packages where such buildids are present. This
will in turn allow for one to run 'perf record' in one machine
and 'perf report' in another.
Future work on having the buildid sent directly from the kernel
in the PERF_RECORD_MMAP event is needed to close races, as the
DSO can be changed during a 'perf record' session, but this
patch at least helps with non-corner cases and current/older
kernels.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: K. Prasad <prasad@linux.vnet.ibm.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roland McGrath <roland@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1257367843-26224-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch modifies Makefile for new files related to 'bench'
subcommand. The new code is active from this point on.
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: fweisbec@gmail.com
Cc: Jiri Kosina <jkosina@suse.cz>
LKML-Reference: <1257381097-4743-8-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds bench/sched-pipe.c.
bench/sched-pipe.c is a benchmark program
to measure performance of pipe() system call.
This benchmark is based on pipe-test-1m.c by Ingo Molnar:
http://people.redhat.com/mingo/cfs-scheduler/tools/pipe-test-1m.c
Example of use:
% perf bench sched pipe
(executing 1000000 pipe operations between two tasks)
Total time:4.499 sec
4.499179 usecs/op
222262 ops/sec
% perf bench sched pipe -s -l 1000
0.015
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: fweisbec@gmail.com
Cc: Jiri Kosina <jkosina@suse.cz>
LKML-Reference: <1257381097-4743-4-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds bench/sched-messaging.c.
This benchmark measures performance of scheduler and IPC
mechanisms, and is based on hackbench by Rusty Russell.
Example of usage:
% perf bench sched messaging -g 20 -l 1000 -s
5.432 # in sec
% perf bench sched messaging # run with default
options (20 sender and receiver processes per group)
(10 groups == 400 processes run)
Total time:0.308 sec
% perf bench sched messaging -t -g 20 # # be multi-thread,
with 20 groups (20 sender and receiver threads per group)
(20 groups == 800 threads run)
Total time:0.582 sec
( Rusty is the original author of hackbench.c and he said the code is
and was under the GPLv2 so fine to be merged. )
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: fweisbec@gmail.com
Cc: Jiri Kosina <jkosina@suse.cz>
LKML-Reference: <1257381097-4743-3-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fall back to non-dwarf probe point if the probe definition may
not need dwarf analysis, when perf can't find vmlinux/debuginfo.
This might skip some inlined code of target function.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091104001229.3454.63987.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
So that we can run it without having a DSO instance.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1257291970-8208-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Conflicts:
tools/perf/Makefile
Merge reason: Resolve the conflict, merge to upstream and merge in
perf fixes so we can add a dependent patch.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Brown paper bag bug introduced in:
66bd8424cc ("perf tools: Delay
loading symtabs till we hit a map with it")
Without this we were not loading any symtabs that happened to be
on a DSO for which the allocated memory for ->loaded was !0.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1257270738-5669-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Annotate away this false positive warning on older GCCs:
cc1: warnings being treated as errors
builtin-probe.c: In function ‘parse_probe_event’:
builtin-probe.c:72: warning: ‘nc’ is used uninitialized in this function
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
LKML-Reference: <1257254947-16789-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix:
util/map.c: In function ‘map__find_symbol’:
util/map.c:97: error: field precision should have type ‘int’, but argument 3 has type ‘size_t’
Also clean up some line wrap damage - we dont line-wrap printk
messages.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256927305-4628-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Instead of:
no symbols found in /usr/lib/gstreamer-0.10/libgsttypefindfunctions.so (deleted), maybe install a debug package?
no symbols found in /usr/lib/gstreamer-0.10/libgstaudioconvert.so (deleted), maybe install a debug package?
We now emit:
/usr/lib/gstreamer-0.10/libgsttypefindfunctions.so was updated, restart the long running apps that use it!
/usr/lib/gstreamer-0.10/libgstaudioconvert.so was updated, restart the long running apps that use it!
Which is far less misleading about what the cause of the
symbol mismatch is.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256927305-4628-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Before we were storing this in the DSO, but in fact this is a
property of the 'symbol' class, not something that will vary
among DSOs, so move it to a global variable and initialize it
using the existing symbol__init routine.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256927305-4628-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add function-entry relative line number specifying support to
perf-probe. This allows users to define probes by line number
from entry of the function.
e.g.
perf probe schedule:16
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091027204319.30545.30678.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This changes probe point syntax of perf-probe as below
<SRC>[:ABS_LN] [ARGS]
or
<FUNC>[+OFFS|%return][@SRC] [ARGS]
And event name and event group name are automatically
generated based on probe-symbol and offset as below.
perfprobes/SYMBOL_OFFSET[_NUM]
Where SYMBOL is the probing symbol and OFFSET is
the byte offset from the symbol.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091027204310.30545.84984.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Exit searching after finding real (not-inlined) function,
because there should be no same symbol in that CU.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091027204252.30545.19251.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
So that we can have a quicker start on perf top and even
speedups in the other tools, as we can have maps with no hits,
so no need to load its symtabs.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256773881-4191-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add two more software events that are common to many cpus.
Alignment faults: When a load or store is not aligned properly.
Emulation faults: When an instruction is emulated in software.
Both cause a very significant slowdown (100x or worse), so identifying and
fixing them is very important.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Writing to stdout is probably the expected behavior because the
user explicitly asked for a list.
Signed-off-by: Marti Raudsepp <marti@juffo.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4ebb59420ef057972167.1256603585@localhost>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Previously no indication was given about what went wrong.
Signed-off-by: Marti Raudsepp <marti@juffo.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <03ec9ee96f17cef05424.1256603584@localhost>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Because we will need it in 'perf top' to support userspace
symbols for existing threads.
Now we pass a callback that will receive the synthesized event
and then write it to the output file in 'perf record' and in the
upcoming patch for 'perf top' we will just immediatelly create
the in memory representation of threads and maps.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256592199-9608-2-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
For the perf tool the patch implements an Alpha specific section
in the perf.h header file.
Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1256545926-6972-1-git-send-email-mcree@orcon.net.nz>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The present use of -Wcast-align causes the build to blow up on
SH due to generating a "cast increases required alignment of
target type" error on each invocation of list_for_each_entry().
It seems that this was previously reported and killed off in the
ia64 support patch, but nothing seems to have happened with
that. Presumably the same problem still remains there, too.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
LKML-Reference: <20091026054000.GA13517@linux-sh.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The Makefile now automatically defines LIBELF_NO_MMAP when
libelf 0.8.x is detected. libelf 0.8 is still maintained and
some distributions such as Arch Linux use it instead of
elfutils.
Signed-off-by: Marti Raudsepp <marti@juffo.org>
Cc: Lucas De Marchi <lucas.de.marchi@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256400636.3007.16.camel@newn>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use the new pr_{err,warning,debug,etc} printout methods, just
like in the kernel.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256153646-10097-1-git-send-email-acme@redhat.com>
[ Split this patch out, to keep perf/probes separate. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Conflicts:
tools/perf/Makefile
Merge reason:
- fix the conflict
- pick up the pr_*() infrastructure to queue up dependent patch
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We were using eprintf in some places, that looks at a global
'verbose' level, and at other places passing a 'v' parameter to
specify the verbosity level, unify it by introducing
pr_{err,warning,debug,etc}, just like in the kernel.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256153646-10097-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Wrapping the kernel headers is dangerous when it comes to arch
headers. Once we wrap asm/types.h, it will also replace the
glibc asm/types.h, not only the kernel one.
This results in build errors on some machines.
Drop this wrapper and do its work from linux/types.h wrapper,
also the glibc asm/types.h can already handle most of the type
definition it was doing (typedef __u64, __u32, etc...).
Todo: Check the others asm/*.h wrappers to prevent from other
conflicts.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
LKML-Reference: <1256246604-17156-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently, the callchains are displayed using a constant left
margin. So depending on the current sort dimension
configuration, callchains may appear to be well attached to the
first sort dimension column field which is mostly the case,
except when the first dimension of sorting is done by comm,
because these are right aligned.
This patch binds the callchain to the first letter in the first
column, whatever type of column it is (dso, comm, symbol).
Before:
0.80% perf [k] __lock_acquire
__lock_acquire
lock_acquire
|
|--58.33%-- _spin_lock
| |
| |--28.57%-- inotify_should_send_event
| | fsnotify
| | __fsnotify_parent
After:
0.80% perf [k] __lock_acquire
__lock_acquire
lock_acquire
|
|--58.33%-- _spin_lock
| |
| |--28.57%-- inotify_should_send_event
| | fsnotify
| | __fsnotify_parent
Also, for clarity, we don't put anymore the callchain as is but:
- If we have a top level ancestor in the callchain, start it
with a first ascii hook.
Before:
0.80% perf [kernel] [k] __lock_acquire
__lock_acquire
lock_acquire
|
|--58.33%-- _spin_lock
| |
| |--28.57%-- inotify_should_send_event
| | fsnotify
[..] [..]
After:
0.80% perf [kernel] [k] __lock_acquire
|
--- __lock_acquire
lock_acquire
|
|--58.33%-- _spin_lock
| |
| |--28.57%-- inotify_should_send_event
| | fsnotify
[..] [..]
- Otherwise, if we have several top level ancestors, then
display these like we did before:
1.69% Xorg
|
|--21.21%-- vread_hpet
| 0x7fffd85b46fc
| 0x7fffd85b494d
| 0x7f4fafb4e54d
|
|--15.15%-- exaOffscreenAlloc
|
|--9.09%-- I830WaitLpRing
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
LKML-Reference: <1256246604-17156-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
While recursively printing the branches of each callchains, we
forget to display the root. It is never printed.
Say we have:
symbol
f1
f2
|
-------- f3
| f4
|
---------f5
f6
Actually we never see that, instead it displays:
symbol
|
--------- f3
| f4
|
--------- f5
f6
However f1 is always the same than "symbol" and if we are
sorting by symbols first then "symbol", f1 and f2 will be well
aligned like in the above example, so displaying f1 looks
redundant here.
But if we are sorting by something else first (dso, comm,
etc...), displaying f1 doesn't look redundant but rather
necessary because the symbol is not well aligned anymore with
its callchain:
comm dso symbol
f1
f2
|
--------- [...]
And we want the callchain to be obvious.
So we fix the bug by printing the root branch, but we also
filter its first entry if we are sorting by symbols first.
Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1256246604-17156-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The second argument in the strtok_r() function is not to be used
generically and can have different implementations. Currently
the function parsing of the perf trace code uses the second
argument to copy data from. This can crash the tool or just have
unpredictable results.
The correct solution is to use strsep() which has a defined
result.
I also added a check to see if the result was correct, and will
break out of the loop in case it fails to parse as expected.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091020232034.237814877@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When using gdb to debug perf, it is practically impossible to
use when perf is compiled with -O6. For developers, this patch
adds the DEBUG feature to the make command line so that a
developer can easily remove the optimization flag.
LKML-Reference: <1255590330.8392.446.camel@twins>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091020232033.984323261@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We need to use map->unmap_ip() here too to match section
relative symbol address to the absolute address needed to match
objdump -dS addresses.
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1256061295-19835-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If the user doesn't pass a symbol name to annotate, it will
annotate all the symbols that have hits, in order, just like
'perf report -s comm,dso,symbol'.
This is a natural followup patch to the one that uses
output_hists to find the symbols with hits.
The common case is to annotate the first few entries at the top
of a perf report, so lets type less characters.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256058509-19678-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We have this sym_priv_size mechanism for attaching private areas
to struct symbol entries but annotate wasn't using it, adding
private areas to struct symbol in addition to a ->priv pointer.
Scrap all that and use the sym_priv_size mechanism.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256055940-19511-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We need this because we get section relative addresses when
reading the symtabs, but when a tool like 'perf annotate' needs
to match these address to what 'objdump -dS' produces we need
the address + section back again.
So in annotate now we look at the 'struct hist_entry' instances
(that weren't really being used) so that we iterate only over
the symbols that had some hit and get the map where that
particular hit happened so that we can get the right address to
match with annotate.
Verified that at least:
perf annotate mmap_read_counter # Uses the ~/bin/perf binary
perf annotate --vmlinux /home/acme/git/build/perf/vmlinux intel_pmu_enable_all
on a 'perf record perf top' session seems to work.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1255979877-12533-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
