radeon_vm_map_gart can use rdev->gart.pages_entry instead.
Also move the masking of the page address to radeon_vm_map_gart from its
callers.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The GART table BO has to be moved out of VRAM for suspend/resume. Any
updates to the GART table during that time were silently dropped without
this change. This caused GPU lockups on resume in some cases, see the bug
reports referenced below.
This might also make GPU reset more robust in some cases, as we no longer
rely on the GART table in VRAM being preserved across the GPU
lockup/reset.
v2: Add logic to radeon_gart_table_vram_pin directly instead of
reinstating radeon_gart_restore
v3: Move code after assignment of rdev->gart.table_addr so that the GART
TLB flush can work as intended, add code comment explaining why we're
doing this
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85204
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86267
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
get_page_entry calculates the GART page table entry, which is just written
to the GART page table by set_page_entry.
This is a prerequisite for the following fix.
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When using overlays with drivers calling of_populate the notifier
will try to create the device twice. Using the populated bit
before proceeding protects against this.
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
During the course of the rewrites a bug sneaked in when dealing
with children nodes of overlays, which ends up duplicating
sub nodes.
Simply remove the duplicate traversal of child nodes to fix.
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Since b2052564e6 ("mm: memcontrol: continue cache reclaim from
offlined groups"), re-mounting the memory controller after using it is
very likely to hang.
The cgroup core assumes that any remaining references after deleting a
cgroup are temporary in nature, and synchroneously waits for them, but
the above-mentioned commit has left-over page cache pin its css until
it is reclaimed naturally. That being said, swap entries and charged
kernel memory have been doing the same indefinite pinning forever, the
bug is just more likely to trigger with left-over page cache.
Reparenting kernel memory is highly impractical, which leaves changing
the cgroup assumptions to reflect this: once a controller has been
mounted and used, it has internal state that is independent from mount
and cgroup lifetime. It can be unmounted and remounted, but it can't
be reconfigured during subsequent mounts.
Don't offline the controller root as long as there are any children,
dead or alive. A remount will no longer wait for these old references
to drain, it will simply mount the persistent controller state again.
Reported-by: "Suzuki K. Poulose" <Suzuki.Poulose@arm.com>
Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
In that case the only failure possible is not to have enough memory, as
we are just creating the evsels, not trying to access any system
facility such as debugfs files or syscalls.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-7k6asvfhiwiu2zs6o2oknchk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was hardcoded for one specific tracepoint, leftover from its initial
user: 'perf trace'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-j1jicvwljy5qx1nah4mkmyke@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As this is not specific to an evlist and may be used with other tools.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-a9up9mivx1pzdf5tqrqsx62d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tools/perf/util/include/asm/hash.h
This patch fixes a bug where the first_pipe index passed into init_pipelines()
was a #define instead of the value that is passed into amdkfd by radeon
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
This patch fixes a bug when calling to init_pipeline() interface.
The index that was passed to that function didn't take into account the
first_pipe value, which represents the first pipe index that is under amdkfd's
responsibility.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
This patch fixes the behavior of kgd_init_pipeline in that this function
shouldn't automatically increase the pipe_id argument by 1 right at the start
of the function.
This is because the first_pipe value might not be always 1, and because a
proper interface function should not hide this info inside its implementation.
In other words, the calling function should provide the real pipe_id and not
count on kgd_init_pipeline to "fix" it.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
LPCR_PECE1 bit controls whether decrementer interrupts are allowed to
cause exit from power-saving mode. While waking up from winkle, restoring
LPCR with LPCR_PECE1 set (i.e Decrementer interrupts allowed) can cause
issue in the following scenario:
- All the threads in a core are offlined. The core enters deep winkle.
- Spurious interrupt wakes up a thread in the core. Here LPCR is restored
with LPCR_PECE1 bit set.
- Since it was a spurious interrupt on a offline thread, the thread clears
the interrupt and goes back to winkle.
- Here before the thread executes winkle and puts the core into deep winkle,
if a decrementer interrupt occurs on any of the sibling threads in the core
that thread wakes up.
- Since in offline loop we are flushing interrupt only in case of external
interrupt, the decrementer interrupt does not get flushed. So at this stage
the thread is stuck in this is loop of waking up at 0x100 due to decrementer
interrupt, not flushing the interrupt as only external interrupts get flushed,
entering winkle, waking up at 0x100 again.
Fix this by programming PORE to restore LPCR with LPCR_PECE1 bit
cleared when waking up from winkle.
Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* Instantiate GIC from C board code in legacy builds on r8a7778 and r8a7779
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Mb4f
-----END PGP SIGNATURE-----
Merge tag 'renesas-soc-fixes2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes
Merge "Second Round of Renesas ARM Based SoC Fixes for v3.19" from Simon
Horman:
* Instantiate GIC from C board code in legacy builds on r8a7778 and r8a7779
* tag 'renesas-soc-fixes2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: r8a7779: Instantiate GIC from C board code in legacy builds
ARM: shmobile: r8a7778: Instantiate GIC from C board code in legacy builds
Signed-off-by: Olof Johansson <olof@lixom.net>
James Bottomley points out that it will be -1 during unload. It's
only used for diagnostics, so let's not hide that as it could be a
clue as to what's gone wrong.
Cc: Jason Wessel <jason.wessel@windriver.com>
Acked-and-documention-added-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Masami Hiramatsu <maasami.hiramatsu.pt@hitachi.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
fix a vmwgfx regression sleeping wrong task state.
* 'vmwgfx-fixes-3.19' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Replace the hw mutex with a hw spinlock
device_caps in struct v4l2_capability were inadequately set in
VIDIOC_QUERYCAP. Fix this. Without this a WARN_ON in the v4l2 core
is triggered. This WARN_ON was added for kernel 3.19 exactly to
detect these situations.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The VIDIOC_QUERYCAP function should set device_caps, but this was missing.
In addition, it set the version field as well, but that should be done by
the core, not by the driver.
If a driver doesn't set device_caps the v4l2 core will issue a WARN_ON, so
it's important that this is set correctly.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The locking scheme inside the vb2 thread is unsafe when stopping the
thread. In particular kthread_stop was called *after* internal data
structures were cleaned up instead of doing that before. In addition,
internal vb2 functions were called after threadio->stop was set to
true and vb2_internal_streamoff was called. This is also not allowed.
All this led to a variety of race conditions and kernel warnings and/or
oopses.
Fixed by moving the kthread_stop call up before the cleanup takes
place, and by checking threadio->stop before calling internal vb2
queuing operations.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org> # for v3.16 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The V4L2 API requires both .capabilities and .device_caps fields of
struct v4l2_capability to be set. Otherwise the compliance checker
complains and since commit "v4l2-ioctl: WARN_ON if querycap didn't fill
device_caps" a compile-time warning is issued. Fix this non-compliance
in the rcar_vin driver.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The V4L2 API requires both .capabilities and .device_caps fields of
struct v4l2_capability to be set. Otherwise the compliance checker
complains and since commit "v4l2-ioctl: WARN_ON if querycap didn't fill
device_caps" a compile-time warning is issued. Fix this non-compliance
in several soc-camera camera host drivers.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Commit 2adb177e57 removed 2 devices
from the cxusb device table but failed to fix up the T230 properties
that follow, meaning that this device no longer gets detected properly.
Adjust the cxusb_table index appropriate so detection works.
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Reviewed-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Unconditionally attaching Si2161/Si2165 demod driver
breaks Hauppauge WinTV Starburst.
So create own card entry for this.
Add card name comments to the subsystem ids.
This fixes a regression introduced in 3.17 by
36efec48e2 ([media] cx23885: Add si2165 support for HVR-5500)
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Tested-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
CC: stable@vger.kernel.org # for 3.17 and upper
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
X-Patchwork-Delegate: m.chehab@samsung.com
Changeset ea2e813e8c moved the driver to staging, but it forgot to
preserve the existing dependency.
Fixes: ea2e813e8c ("[media] tlg2300: move to staging in preparation for removal")
Reported-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This function call was being optimized out during nfs_fhget(), leading
to situations where we have a valid fileid but still want to use the
mounted_on_fileid. For example, imagine we have our server configured
like this:
server % df
Filesystem Size Used Avail Use% Mounted on
/dev/vda1 9.1G 6.5G 1.9G 78% /
/dev/vdb1 487M 2.3M 456M 1% /exports
/dev/vdc1 487M 2.3M 456M 1% /exports/vol1
/dev/vdd1 487M 2.3M 456M 1% /exports/vol2
If our client mounts /exports and tries to do a "chown -R" across the
entire mountpoint, we will get a nasty message warning us about a circular
directory structure. Running chown with strace tells me that each directory
has the same device and inode number:
newfstatat(AT_FDCWD, "/nfs/", {st_dev=makedev(0, 38), st_ino=2, ...}) = 0
newfstatat(4, "vol1", {st_dev=makedev(0, 38), st_ino=2, ...}) = 0
newfstatat(4, "vol2", {st_dev=makedev(0, 38), st_ino=2, ...}) = 0
With this patch the mounted_on_fileid values are used for st_ino, so the
directory loop warning isn't reported.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We only support swap file calling nfs_direct_IO. However, application
might be able to get to nfs_direct_IO if it toggles O_DIRECT flag
during IO and it can deadlock because we grab inode->i_mutex in
nfs_file_direct_write(). So return 0 for such case. Then the generic
layer will fall back to buffer IO.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Put controller into init mode in network stop to end pending transmissions. The
issue is observed in cases when transmitted frame is not acked.
Signed-off-by: Viktor Babrian <babrian.viktor@renyi.mta.hu>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
because gcc 4.8 for superH does not support -m32, and the recordmcount.pl
script adds "-m32" when re-compiling the object files with the mcount
locations.
I was not able to reproduce this problem, as it seems that -m32 works fine
for my cross compiler gcc 4.6.3, but I have to assume that -m32 was
deprecated somewhere between 4.6 and 4.8. As it still seems to compile
fine without -m32, I have no reason not to add this patch, as having
-m32 seems to cause trouble for others.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUv9sOAAoJEEjnJuOKh9ldPUIIAJle6R3v+53gylalVhOnn56f
fQkONz1HvLteneBGTFG4xiwK6BJNeTOcLOQbCfBwNBZUjg7QG5eEU3wBG6DCZNIf
Tc1DqB78Fx9HnI0wJby/VtgIMbTqvPsXta0J75g7EFXwaP8bUZFL1s6QmskKlFTf
Gvhr93YP2SFawRf8Gy9AVCkLBSwU1T5y0IsQXPw49buNT+aWwoMWCNJb03rLfZYz
MCNgTfQxf4aYK1EThvb8xurjD2rZkJmRc/LN37vj8M+2e9HoIitCd4O/doxEQtvK
aFw7q/K23bFIXfjKoF1Yjk8hLoQZgCxruZwmZyxEEPtTGsUfNcSyfgpHTNeNDrk=
=d6qd
-----END PGP SIGNATURE-----
Merge tag 'trace-sh-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull superh tracing fix from Steven Rostedt:
"It's been reported that function tracing does not work on the sh
architecture because gcc 4.8 for superH does not support -m32, and the
recordmcount.pl script adds "-m32" when re-compiling the object files
with the mcount locations.
I was not able to reproduce this problem, as it seems that -m32 works
fine for my cross compiler gcc 4.6.3, but I have to assume that -m32
was deprecated somewhere between 4.6 and 4.8. As it still seems to
compile fine without -m32, I have no reason not to add this patch, as
having -m32 seems to cause trouble for others"
* tag 'trace-sh-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
scripts/recordmcount.pl: There is no -m32 gcc option on Super-H anymore
The prior change fixes default output ordering with each column but it
breaks -o/--order option. This patch prepends a new hpp fmt struct to
sort list but not to output field list so that it can affect ordering
without adding a new output column.
The new hpp fmt uses its own compare functions which treats dummy
entries (which have no baseline) little differently - the delta field
can be computed without baseline but others (ratio and wdiff) are not.
The new output will look like below:
$ perf diff -o 2 perf.data.{old,cur,new}
...
# Baseline/0 Delta/1 Delta/2 Shared Object Symbol
# .......... ....... ....... ................. ..........................................
22.98% +0.51% +0.52% libc-2.20.so [.] _int_malloc
5.70% +0.28% +0.30% libc-2.20.so [.] free
4.38% -0.21% +0.25% a.out [.] main
1.32% -0.15% +0.05% a.out [.] free@plt
+0.01% [kernel.kallsyms] [k] intel_pstate_timer_func
+0.01% [kernel.kallsyms] [k] _raw_spin_lock_irqsave
+0.01% [kernel.kallsyms] [k] timekeeping_update.constprop.8
+0.01% +0.01% [kernel.kallsyms] [k] apic_timer_interrupt
0.01% -0.00% [kernel.kallsyms] [k] native_read_msr_safe
0.01% -0.01% -0.01% [kernel.kallsyms] [k] native_write_msr_safe
1.31% +0.03% -0.06% a.out [.] malloc@plt
31.50% -0.74% -0.23% libc-2.20.so [.] _int_free
32.75% +0.28% -0.83% libc-2.20.so [.] malloc
0.01% [kernel.kallsyms] [k] scheduler_tick
+0.01% [kernel.kallsyms] [k] read_tsc
+0.01% [kernel.kallsyms] [k] perf_adjust_freq_unthr_context.part.82
In above example, the output was sorted by 'Delta/2' column first, and
then 'Baseline/0' and finally 'Delta/1'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1420677949-6719-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently ->cmp, ->collapse and ->sort callbacks doesn't pass
corresponding fmt. But it'll be needed by upcoming changes in
perf diff command.
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1420677949-6719-6-git-send-email-namhyung@kernel.org
[ fix build by passing perf_hpp_fmt pointer to hist_entry__cmp_ methods ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The fmt_to_data_file() is to retrieve struct data__file from
perf_hpp_fmt which is embedded in diff_hpp_fmt. It'll be used by sort
callback functions later.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1420677949-6719-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current perf diff result is somewhat confusing since it sometimes hide
small result and sometimes there's no result. So do not hide small
result (less than 0.01%) and print "N/A" if baseline is not
recorded (for ratio and wdiff only). Blank means the baseline is
available but its pairs are not.
Before:
# Baseline Delta Shared Object Symbol
# ........ ....... ................. .........................
#
...
0.01% -0.01% [kernel.kallsyms] [k] native_write_msr_safe
0.01% [kernel.kallsyms] [k] scheduler_tick
0.01% [kernel.kallsyms] [k] native_read_msr_safe
0.00% [kernel.kallsyms] [k] __rcu_read_unlock
[kernel.kallsyms] [k] _raw_spin_lock
+0.01% [kernel.kallsyms] [k] apic_timer_interrupt
[kernel.kallsyms] [k] read_tsc
After:
# Baseline Delta Shared Object Symbol
# ........ ....... ................. .........................
#
...
0.01% -0.01% [kernel.kallsyms] [k] native_write_msr_safe
0.01% [kernel.kallsyms] [k] scheduler_tick
0.01% [kernel.kallsyms] [k] native_read_msr_safe
0.00% [kernel.kallsyms] [k] __rcu_read_unlock
+0.01% [kernel.kallsyms] [k] _raw_spin_lock
+0.01% [kernel.kallsyms] [k] apic_timer_interrupt
+0.01% [kernel.kallsyms] [k] read_tsc
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1419656793-32756-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hists__compute_resort() is to sort output fields based on the
given field/criteria. This was done without the sort list but as we
added the field to the sort list, we can do it with normal
hists__output_resort() using the ->sort callback.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1419656793-32756-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The exclusive options are to prohibit use of conflicting options at the
same time. But it had a side effect that it also limits a such option
can be used at most once. Currently the only user of the flag is perf
probe and it allows to use such options more than once, but when one
tries to use it, perf will fail like below:
$ sudo perf probe -x /lib/libc-2.20.so --add malloc --add free
Error: option `add' cannot be used with add
...
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1420886028-15135-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Event parameters are a basic way for partial events to be specified in
sysfs with per-event names given to the fields that need to be filled in
when using a particular event.
It is intended for supporting cases where the single 'cpu' parameter is
insufficient. For example, POWER 8 has events for physical
sockets/cores/cpus that are accessible from with virtual machines. To
keep using the single 'cpu' parameter we'd need to perform a mapping
between Linux's cpus and the physical machine's cpus (in this case Linux
is running under a hypervisor). This isn't possible because bindings
between our cpus and physical cpus may not be fixed, and we probably
won't have a "cpu" on each physical cpu.
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Cody P Schafer <dev@codyps.com>
Cc: Haren Myneni <hbabu@us.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1420679633-28856-4-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This causes `perf list pmu` to show parameters for parameterized events
like:
pmu/event_name,param1=?,param2=?/ [Kernel PMU event]
An example:
hv_24x7/HPM_TLBIE__PHYS_CORE,core=?/ [Kernel PMU event]
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Cody P Schafer <dev@codyps.com>
Cc: Haren Myneni <hbabu@us.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1420679633-28856-3-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removes some functions that are not used anywhere:
color_parse_mem()
color_parse()
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ramkumar Ramachandra <artagnon@gmail.com>
Link: http://lkml.kernel.org/r/1419079865-354-1-git-send-email-rickard_strandqvist@spectrumdigital.se
[ Remove now unused parse_{attr,color} routines too ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The report__inc_stat() function collects the number of hist entries in
the session in order to calculate the max size of the progess bar.
It'd be better if it does it during the addition of hist entries so that
it can be used by other places too.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1419223455-4362-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The code being used when decaying and deleting entries from a hists
instance was the same, provide a function to avoid code dup.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-j6ideab7lkakavfvfguw858z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No logic changes, just to be consistent.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-f7n5y0mvk6gew5185h6fg316@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just like the other parameters, grouping it on the builtin-mem specific
config area: struct perf_mem.
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Fowles <rfowles@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ad8ns5l51ongemfsir3zy09x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch modifies perf mem to default to sampling loads and stores
simultaneously. It could only do one or the other before yet there was
no hardware restriction preventing simultaneous collection. With this
patch, one run is sufficient to collect both.
It is still possible to sample only loads or stores by using the
-t option:
$ perf mem -t load rec
$ perf mem -t load rep
Or
$ perf mem -t store rec
$ perf mem -t store rep
The perf report TUI will show one event at a time. The store output will
contain a Weight column which will be empty.
In V2, we updated the man pages to reflect the change and also simplify
the initialization of the argv vector passed to the cmd_*() functions as
per LKML feedback.
In V3, we fixed typos in the changelog.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Fowles <rfowles@redhat.com>
Link: http://lkml.kernel.org/r/20141217152355.GA10053@thinkpad
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
