As data_disks is *less* than raid_disks, the current test here is obviously
wrong. And as the difference is already available in conf->max_degraded, it
makes much more sense to use that.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
RAID5 recently changed to RAID456
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I was experimenting with Linux SW raid today and found a spelling error when
reading the help menus... (and fly spell found more).
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The size calculation made assumtion which the new offset mode didn't
follow. This gets the size right in all cases.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix problems with new bmap based access to bitmap files.
1/ When not using a file based bitmap, attach a NULL list of buffers
to each page so the common free_buffer routine can cope.
2/ Use submit_bh to read as well as write, rather than vfs_read.
This makes read and write more symetric.
3/ sync the file before reading, to ensure that the page cache has no
dirty pages that might get written out later.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If md is asked to store a bitmap in a file, it tries to hold onto the page
cache pages for that file, manipulate them directly, and call a cocktail of
operations to write the file out. I don't believe this is a supportable
approach.
This patch changes the approach to use the same approach as swap files. i.e.
bmap is used to enumerate all the block address of parts of the file and we
write directly to those blocks of the device.
swapfile only uses parts of the file that provide a full pages at contiguous
addresses. We don't have that luxury so we have to cope with pages that are
non-contiguous in storage. To handle this we attach buffers to each page, and
store the addresses in those buffers.
With this approach the pagecache may contain data which is inconsistent with
what is on disk. To alleviate the problems this can cause, md invalidates the
pagecache when releasing the file. If the file is to be examined while the
array is active (a non-critical but occasionally useful function), O_DIRECT io
must be used. And new version of mdadm will have support for this.
This approach simplifies a lot of code:
- we no longer need to keep a list of pages which we need to wait for,
as the b_endio function can keep track of how many outstanding
writes there are. This saves a mempool.
- -EAGAIN returns from write_page are no longer possible (not sure if
they ever were actually).
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
md/bitmap modifies i_writecount of a bitmap file to make sure that no-one else
writes to it. The reverting of the change is sometimes done twice, and there
is one error path where it is omitted.
This patch tidies that up.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
bitmap_active is never called, and the BITMAP_ACTIVE flag is never users or
tested, so discard them both.
Also remove some out-of-date 'todo' comments.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
md/bitmap gets a collection of pages representing the bitmap when it
initialises the bitmap, and puts all the references when discarding the
bitmap.
It also occasionally takes extra references without any good reason, and
sometimes drops them ... though it doesn't always drop them, which can result
in a memory leak.
This patch removes the unnecessary 'get_page' calls, and the corresponding
'put_page' calls.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In particular, this means that we use 4 bits per page instead of a whole
unsigned long.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
md/bitmap has some attributes per-page. Handling of these attributes in
largely abstracted in set_page_attr and clear_page_attr. However
get_page_attr exposes the format used to store them. So prior to changing
that format, introduce test_page_attr instead of get_page_attr, and make
appropriate usage changes.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
md/bitmap currently has a separate thread to wait for writes to the bitmap
file to complete (as we cannot get a callback on that action).
However this isn't needed as bitmap_unplug is called from process context and
waits for the writeback thread to do it's work. The same result can be
achieved by doing the waiting directly in bitmap_unplug.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When "mdadm --grow /dev/mdX --bitmap=none" is used to remove a filebacked
bitmap, the bitmap was disconnected from the array, but the file wasn't closed
(until the array was stopped).
The file also wasn't closed if adding the bitmap file failed.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
... as raid5 sync_request is WAY too big.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch makes the needlessly global md_print_devices() static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The "industry standard" DDF format allows for a stripe/offset layout where
data is duplicated on different stripes. e.g.
A B C D
D A B C
E F G H
H E F G
(columns are drives, rows are stripes, LETTERS are chunks of data).
This is similar to raid10's 'far' mode, but not quite the same. So enhance
'far' mode with a 'far/offset' option which follows the layout of DDFs
stripe/offset.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
For a while we have had checkpointing of resync. The version-1 superblock
allows recovery to be checkpointed as well, and this patch implements that.
Due to early carelessness we need to add a feature flag to signal that the
recovery_offset field is in use, otherwise older kernels would assume that a
partially recovered array is in fact fully recovered.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
At shutdown, we switch all arrays to read-only, which creates a message for
every instantiated array, even those which aren't actually active.
So remove the message for non-active arrays.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There is a lot of commonality between raid5.c and raid6main.c. This patches
merges both into one module called raid456. This saves a lot of code, and
paves the way for online raid5->raid6 migrations.
There is still duplication, e.g. between handle_stripe5 and handle_stripe6.
This will probably be cleaned up later.
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When a md array has been idle (no writes) for 20msecs it is marked as 'clean'.
This delay turns out to be too short for some real workloads. So increase it
to 200msec (the time to update the metadata should be a tiny fraction of that)
and make it sysfs-configurable.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This warning was slightly useful back in 2.2 days, but is more an annoyance
now. It makes it awkward to add new ioctls (that we we are likely to do that
in the current climate, but it is possible).
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The largest chunk size the code can support without substantial surgery is
2^30 bytes, so make that the limit instead of an arbitrary 4Meg. Some day,
the 'chunksize' should change to a sector-shift instead of a byte-count. Then
no limit would be needed.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
A recent change made this goto unnecessary, so reformat the code to make it
clearer what is happening.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Tidy device-mapper error messages to include context information
automatically.
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If you misuse the device-mapper interface (or there's a bug in your userspace
tools) it's possible to end up with 'unlinked' mapped devices that cannot be
removed until you reboot (along with uninterruptible processes).
This patch prevents you from removing a device that is still open.
It introduces dm_lock_for_deletion() which is called when a device is about to
be removed to ensure that nothing has it open and nothing further can open it.
It uses a private open_count for this which also lets us remove one of the
problematic bdget_disk() calls elsewhere.
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add a library function dm_create_error_table() to create a table that rejects
any I/O sent to a device with EIO.
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Move definitions of core device-mapper functions for manipulating mapped
devices and their tables to <linux/device-mapper.h> advertising their
availability for use elsewhere in the kernel.
Protect the contents of device-mapper.h with ifdef __KERNEL__. And throw
in a few formatting clean-ups and extra comments.
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Merge dm_create() and dm_create_with_minor() by introducing the special value
DM_ANY_MINOR to request the allocation of the next available minor number.
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Return sense if dm_split_args is called with a NULL input parameter.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
kcopyd should accumulate errors - otherwise I/O failures may be ignored
unintentionally.
And invert 'success' (used in a future patch), using a more intuitive
!(read_err || write_err).
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When a mirror is reduced in size, clear the part of the bitmap that is no
longer used.
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix the 'sizeof' in the region log bitmap size calculation: it's uint32_t, not
unsigned long - this breaks on some archs.
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Refactor the code that creates the core and disk log contexts to avoid the
repeated allocation of clean_bits introduced by the last patch.
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
On-disk logs for dm-mirror devices are currently hard-coded to use 512 byte
hard-sector-sizes. This patch fixes dm-log so it will work with devices with
non-512-byte hard-sector-sizes.
To maintain full compatibility, instead of moving the clean-bits bitset to a
bitset, and enlarges the disk-header buffer to encompass both the header and
the bitset. The I/O routines for the bitset are removed, and the I/O routines
for the disk-header now also read/write the bitset.
Signed-off-by: Kevin Corry <kevcorry@us.ibm.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The table is indexed from 0, so an index equal to t->num_targets should be
rejected.
(There is no code in the current tree that would exercise this bug.)
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The device-mapper core does not perform any remapping of bios before passing
them to the targets. If a particular mapping begins part-way into a device,
targets obtain the sector relative to the start of the mapping by subtracting
ti->begin.
The dm-raid1 target didn't do this everywhere: this patch fixes it, taking
care to subtract ti->begin exactly once for each bio.
[akpm: too late for 2.6.17 - suitable for 2.6.17.x after it has settled]
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In alloc_dev(), we register the device with the block layer and then continue
to initialize the device. But register_disk() makes the device available to
be opened before we have completed initialising it.
This patch moves the final bits of the initialization above the disk
registration.
[akpm: too late for 2.6.17 - suitable for 2.6.17.x after it has settled]
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The reference counting on dm-mod is zero if no mapped devices are open. This
is incorrect, and can lead to an oops if the module is unloaded while mapped
devices exist.
This patch claims a reference to the module whenever a device is created, and
drops it again when the device is freed.
Devices must be removed before dm-mod is unloaded.
[akpm: too late for 2.6.17 - suitable for 2.6.17.x after it has settled]
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
To avoid races, _minor_lock must be held while changing mapped device
reference counts.
There are a few paths where a mapped_device pointer is returned before a
reference is taken. This patch fixes them.
[akpm: too late for 2.6.17 - suitable for 2.6.17.x after it has settled]
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There is a chicken and egg problem between the block layer and dm in which the
gendisk associated with a mapping keeps a reference-less pointer to the
mapped_device.
This patch uses a new flag DMF_FREEING to indicate when the mapped_device is
no longer valid. This is checked to prevent any attempt to open the device
from succeeding while the device is being destroyed.
[akpm: too late for 2.6.17 - suitable for 2.6.17.x after it has settled]
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
While removing a device, another another thread might attempt to resurrect it.
This patch replaces the _minor_lock mutex with a spinlock and uses
atomic_dec_and_lock() to serialize reference counting in dm_put().
[akpm: too late for 2.6.17 - suitable for 2.6.17.x after it has settled]
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
idr_pre_get() can sleep while allocating memory.
The next patch will change _minor_lock into a spinlock, so this patch moves
idr_pre_get() outside the lock in preparation.
[akpm: too late for 2.6.17 - suitable for 2.6.17.x after it has settled]
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
One part of the system can attempt to use a mapped device before another has
finished initialising it or while it is being freed.
This patch introduces a place holder value, MINOR_ALLOCED, to mark the minor
as allocated but in a state where it can't be used, such as mid-allocation or
mid-free. At the end of the initialization, it replaces the place holder with
the pointer to the mapped_device, making it available to the rest of the dm
subsystem.
[akpm: too late for 2.6.17 - suitable for 2.6.17.x after it has settled]
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Persistent snapshots currently store a private copy of the chunk size.
Userspace also supplies the chunk size when loading a snapshot. Ensure
consistency by only storing the chunk_size in one place instead of two.
Currently the two sizes will differ if the chunk size supplied by userspace
does not match the chunk size an existing snapshot actually uses. Amongst
other problems, this causes an incorrect 'percentage full' to be reported.
The patch ensures consistency by only storing the chunk_size in one place,
removing it from struct pstore. Some initialisation is delayed until the
correct chunk_size is known. If read_header() discovers that the wrong chunk
size was supplied, the 'area' buffer (which the header already got read into)
is reinitialised to the correct size.
[akpm: too late for 2.6.17 - suitable for 2.6.17.x after it has settled]
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Do not mark sticon_startup() as __init
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Do not mark promcon_startup() and promcon_init_unimap() as __init
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- move register ioremap from newport_startup() to newport_console_init()
- fonts are freed multiple times, do it only once
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Do not mark mdacon_startup __init.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The class device "fbcon" does not need to be a device file. Do not create one
by passing a major and minor number of zero to
class_device_create()/destroy().
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
To enable this feature, CONFIG_VT_HW_CONSOLE_BINDING must be set to 'y'. This
feature will default to 'n' to minimize users accidentally corrupting their
virtual terminals.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add sysfs control to the VT layer. A new sysfs class, 'vtconsole', and class
devices 'vtcon[n]' are added. Each class device file has the following
attributes:
/sys/class/vtconsole/vtcon[n]/name - read-only attribute showing the
name of the current backend
/sys/class/vtconsole/vtcon[n]/bind - read/write attribute
where: 0 - backend is unbound/unbind backend from the VT layer
1 - backend is bound/bind backend to the VT layer
In addition, if any of the consoles are in KD_GRAPHICS mode, binding and
unbinding will not succeed. KD_GRAPHICS mode usually indicates that the
underlying console hardware is used for other purposes other than displaying
text (ie X). This feature should prevent binding/unbinding from interfering
with a graphics application using the VT.
[akpm@osdl.org: warning fixes]
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The control for binding/unbinding is moved from fbcon to the console layer.
Thus the fbcon sysfs attributes, attach and detach, are also gone.
1. Add a notifier event that tells fbcon if a framebuffer driver has been
unregistered. If no registered driver remains, fbcon will unregister
itself from the console layer.
2. Replaced calls to give_up_console() with unregister_con_driver().
3. Still use take_over_console() instead of register_con_driver() to
maintain compatibility
4. Respect the parameter first_fb_vc and last_fb_vc instead of using 0 and
MAX_NR_CONSOLES - 1. These parameters are settable by the user.
5. When fbcon is completely unbound from the console layer, fbcon will
also release (iow, decrement module reference counts to zero) all fbdev
drivers. In other words, a bind or unbind request from the console layer
will propagate down to the framebuffer drivers.
6. If fbcon is not bound to the console, it will ignore all notifier
events (except driver registration and unregistration) and all sysfs
requests.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The framebuffer console is now able to dynamically bind and unbind from the VT
console layer. Due to the way the VT console layer works, the drivers
themselves decide when to bind or unbind. However, it was decided that
binding must be controlled, not by the drivers themselves, but by the VT
console layer. With this, dynamic binding is possible for all VT console
drivers, not just fbcon.
Thus, the VT console layer will impose the following to all VT console
drivers:
- all registered VT console drivers will be entered in a private list
- drivers can register themselves to the VT console layer, but they cannot
decide when to bind or unbind. (Exception: To maintain backwards
compatibility, take_over_console() will automatically bind the driver after
registration.)
- drivers can remove themselves from the list by unregistering from the VT
console layer. A prerequisite for unregistration is that the driver must not
be bound.
The following functions are new in the vt.c:
register_con_driver() - public function, this function adds the VT console
driver to an internal list maintained by the VT console
bind_con_driver() - private function, it binds the driver to the console
take_over_console() is changed to call register_con_driver() followed by a
bind_con_driver(). This is the only time drivers can decide when to bind to
the VT layer. This is to maintain backwards compatibility.
unbind_con_driver() - private function, it unbinds the driver from its
console. The vacated consoles will be taken over by the default boot console
driver.
unregister_con_driver() - public function, removes the driver from the
internal list maintained by the VT console. It will only succeed if the
driver is currently unbound.
con_is_bound() checks if the driver is currently bound or not
give_up_console() is just a wrapper to unregister_con_driver().
There are also 3 additional functions meant to be called only by the tty layer
for sysfs control:
vt_bind() - calls bind_con_driver()
vt_unbind() - calls unbind_con_driver()
vt_show_drivers() - shows the list of registered drivers
Most VT console drivers will continue to work as is, but might have problems
when unbinding or binding which should be fixable with minimal changes.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add the ability to detach and attach the framebuffer console to and from the
vt layer. This is done by echo'ing any value to sysfs attributes located in
class/graphics/fbcon. The two attributes are:
attach - bind fbcon to the vt layer
detach - unbind fbcon from the vt layer
Once fbcon is detached from the vt layer, fbcon can be unloaded if compiled as
a module. This feature is quite useful for developers who work on the
framebuffer or console subsystem. This is also useful for users who want to
go to text mode or graphics mode without having to reboot.
Directly unloading the fbcon module is not possible because the vt layer
increments the module reference count for all bound consoles. Detaching fbcon
decrements the module reference count to zero so unloading becomes possible.
Detaching fbcon may interfere with X and/or DRM.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
To detach fbcon, it must also clean up all resources it allocated. This was
never done before because fbcon cannot be unloaded.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In order for this feature to work, an interface will be needed. The most
appropriate is sysfs. However, the framebuffer console has no sysfs entry
yet. This will create a sysfs class device entry for fbcon under
/sys/class/graphics.
Add a class_device entry 'fbcon' under class 'graphics'. Console-specific
attributes which where previously under class/graphics/fb[x] are moved to
class/graphics/fbcon. These attributes, 'con_rotate' and 'con_rotate_all',
are also renamed to 'rotate' and 'rotate_all' respectively.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Detaching fbcon allows individual drivers to be unloaded. However several
drivers call pci_disable_device() upon exit. This function will disable the
BAR's which will kill VGA text mode and/or affect X/DRM.
To prevent this, remove calls to pci_disable_device() from several drivers.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
To allow for detaching fbcon, it must be able to give up the console.
However, the function give_up_console() is plain broken. It just sets the
entries in the console driver map to NULL, it leaves the vt layer without a
console driver, and does not decrement the module reference count. Calling
give_up_console() is guaranteed to hang the machine..
To fix this problem, ensure that the virtual consoles are not left dangling
without a driver. All systems have a default boot driver (either vgacon or
dummycon) which is never unloaded. For those vt's that lost their driver, the
default boot driver is reassigned back to them.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
One of the limitations of the framebuffer console system is its inablity to
unload or detach itself from the console layer. And once it loads, it also
locks in framebuffer drivers preventing their unload. Although the con2fbmap
utility does provide a means to unload individual drivers, it requires that at
least one framebuffer driver is loaded for use by fbcon.
With this change, it is possible to detach fbcon from the console layer. If it
is detached, it will reattach the boot console driver (which is permanently
loaded) back to the console layer so the system can continue to work. As a
consequence, fbcon will also decrement its reference count of individual
framebuffer drivers, allowing all of these drivers to be unloaded even if
fbcon is still loaded.
Unless you use drivers that restores the display to text mode (rivafb and
i810fb, for example), detaching fbcon does require assistance from userspace
tools (ie, vbetools) for text mode to be restored completely. Without the
help of these tools, fbcon will leave the VGA console corrupted. The methods
that can be used will be described in Documentation/fb/fbcon.txt.
Because the vt layer also increments the module reference count for each
console driver, fbcon cannot be directly unloaded. It must be detached first
prior to unload.
Similarly, fbcon can be reattached to the console layer without having to
reload the module. A nice feature if fbcon is compiled statically.
Attaching and detaching fbcon is done via sysfs attributes. A class device
entry for fbcon is created in /sys/class/graphics. The two attributes that
controls this feature are detach and attach. Two other attributes that are
piggybacked under /sys/class/graphics/fb[n] that are fbcon-specific,
'con_rotate' and 'con_rotate_all' are moved to fbcon. They are renamed as
'rotate' and 'rotate_all' respectively.
Overall, this feature is a great help for developers working in the
framebuffer or console layer. There is not need to continually reboot the
kernel for every small change. It is also useful for regular users who wants
to choose between a graphical console or a text console without having to
reboot.
Example usage for x86:
/* start in text mode */
modprobe xxxfb
modprobe fbcon
/* graphical mode with fbcon using xxxfb */
echo 1 > /sys/class/graphics/fbcon/detach
/* back to text mode, will produce corrupt display unless vbetool is used */
rmmod xxxfb
modprobe yyyfb
/* back to graphical mode with fbcon using yyyfb */
Before trying out this feature, please read Documentation/fb/fbcon.txt.
This patch:
In order for fbcon to detach itself from the console layer, vgacon, which is a
boot console driver, must be fixed so it can retake the console multiple
times, not just during init. The following needs to be done:
- remove __init from the vgacon_startup, this is called again by
take_over_console().
- vc->rows and vc->cols are set manually by vgacon during init. After init,
vc_resize() can be used
- make sure the scrollback_buffer is not reallocated
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Modify the sysfs description of a video mode such that modes are tagged with
their scan type, (p)rogessive, (i)nterlaced, (d)ouble scan. For example,
U:1920x1080i-50. This is useful to disambiguate some of the 'consumer' video
timings found in CEA-861 (especially those for EDTV).
Signed-off-by: Daniel R Thompson <daniel.thompson@st.com>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch adds a new framebuffer driver for the Intel Based macs. This
framebuffer is needed when booting from EFI to get something out the box.
[akpm: note: doesn't support modular building]
[akpm@osdl.org: cleanups]
Signed-off-by: Edgar Hucek <hostmaster@ed-soft.at>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix the following warning:
WARNING: drivers/video/aty/atyfb.o - Section mismatch: reference to
.init.text:aty_init_cursor from .text between 'aty_init' (at offset 0x241d)
and 'atyfb_blank'
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Logo drawing crashes or produces a corrupt display if the logo width and
height are not equal. The dimensions are transposed prior to the actual
rotation and the width is used instead of the height in the actual rotation
code. These produce a corrupt image.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is a fix for the most annoying problem that remained with neofb:
After "setterm -powersave powerdown" the console blanker will disable the
backlight after the given timeout expires. If this happens after the lid
has been shut, we read "LCD off" from the register and store that in the
driver. Once the lid is opened, the backlight turns on, but any key press
that would awaken the blanked console will switch the backlight off again.
The workaround so far was to use the "display config toggle" Fn key combo -
once if no external display is attached, otherwise as often as required to
restore the desired display setup.
The following patch fixes the issue at least for the LCD-only case, with no
external monitor attached. Other display setup permutations are pending
further testing, but so far I can guarantee at least no negative change in
behaviour, if any at all.
Signed-off-by: Christian Trefzer <ctrefzer@gmx.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
CONFIG_FB = m and CONFIG_{BACKLIGHT:LCD}_CLASS_DEVICE = y is possible
resulting in link errors. Fix by making backlight and lcd class also depend
on FB
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
regs.lcdcon1 was not updated on suspend. The result was a garbaged display on
resume. This bug was first noticed by Christer Weinigel. This patch is a
modified version of the one he sent to me.
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Delay the update of the visible framebuffer console until all other consoles
have been initialized in order to avoid losing information. This only seems
to be a problem with modules, not with built-in drivers.
Signed-off-by: David Hollister <david.hollister@amd.com>
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- As per VESA specs, use the VGA registers to set the palette if the mode is
VGA compatible. Otherwise, use the protected mode interface.
- Make pmi_setpal default to 1
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If the hardware palette cannot be accessed, make vesafb_setcolreg return a
nonzero value.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add support for Geforce 6100 and related chipsets (PCI device id 0x024x)
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- make firmware edid independent from framebuffer (No need to choose
framebuffer just to disable this option
- enable this option in X86_64
- check if VBE/DDC function is implemented before calling actual function
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
A static pseudocolor visual with depth less than 4 does exist, so let's not
accidentally upscale the depth with this configuration
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Set the appropriate acceleration flags so fbcon can choose the optimal
scrolling mode.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The drawing functions of atyfb is unecessary syncing the GPU which is
affecting performance. Remove the calls, any direct access by fbcon to the
framebuffer will always be preceeded by a call to atyfb_sync().
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix image and color handling in atyfb_cursor()
- In the 2-bit scheme of the cursor image, just set the first bit to be
always zero (turn off transparency and/or XOR), and just do the masking
manually
- The cursor color is converted into 32-bit RGBA8888 using struct fb_cmap.
Each component in the cmap is u16 in size, so mask the upper 8 bits.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
nVidia is churning out chipsets like there's no tomorrow. And even though the
pci_device_id table now has numerous entries, it is still not guaranteed that
all supported devices are included or will be included.
Fortunately, nvidiafb has chipset detection logic built in. So, change the
contents of the pci_device_id table so it will capture all nVidia devices of
the display class. Unsupported chipsets will then be filtered out by
nvidiafb's detection logic.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The EDID block should specify the display's operating limits (vertical and
horizontal sync ranges, and maximum dot clock). If not given by the EDID
block, the ranges are extrapolated from the modelist. However, the
computation used is only a rough approximation, and the resulting values may
not reflect the actual capability of the display. This problem is frequently
encountered when the EDID block has a single entry, the single mode entry will
fail validation.
To prevent this, calculate the values based on the same method used in
fb_validate_mode().
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove unneeded duplicate #include's of the same header file.
In the case of fbmon.c linux/pci.h is now #include'd unconditional, but
this should be safe.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We had three (sic) VIDEO_SELECT options:
- two in drivers/video/Kconfig
- one in drivers/video/console/Kconfig
This patch removes the two options in drivers/video/Kconfig and also removes
the unneeded usage in drivers/video/sis/sis_main.c .
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add backlight intensity control to the LOCOMO lcd/backlight driver using the
backlight class and add basic power management support.
This is a reimplementation and improvement of patches by John Lenz and Pavel
Machek
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Reported by: Rich (Bugzilla Bug 6417)
"if savage driver is used in x.org together with savagefb, it results in
seriously garbled and distorted screen - coupled with severe slowdowns."
This bug is the result of Xorg unable to handle savagefb altering the
hardware which results in X failing to start properly and/or failed console
switching.
Add savagefb_state_save and savagefb_state_restore. These hooks will only
save and restore the extended VGA registers. Standard VGA registers will be
left alone. This is enough to make savagefb play nicely with the latest
Xorg savage driver, and perhaps with savage DRI. (Transient screen artifacts
may appear before X loads and during console switches).
(Unfortunately, blanking the screen also leaves Xorg in a blanked state, so I
have to unblank the screen before Xorg loads. So I doubt if the transient
screen artifacts will be completely invisible but hopefully it will only be
for a shorter duration (not much).)
[akpm@osdl.org: cleanups]
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Cc: <rich@hq.vsaa.lv>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Allocate space for 2 register states: 'current' for the current state of
the hardware, and 'saved', to be used for restoring the hardware to a sane
state. This is in preparation for the addition of state save and restore
hooks to make savagefb work together with the latest Xorg savage driver.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The driver pdc202xx_old requires CONFIG_BLK_DEV_IDEDMA, so it's always
defined
Signed-off-by: Tobias Oed <tobiasoed@hotmail.com>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Michal Piotrowski reported the following validator assert:
hdd: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
hdd: set_drive_speed_status: error=0xb4 { AbortedCommand LastFailedSense=0x0b }
============================
[ BUG: illegal lock usage! ]
----------------------------
illegal {in-hardirq-W} -> {hardirq-on-W} usage.
hdparm/1821 [HC0[0]:SC0[0]:HE1:SE1] takes:
(ide_lock){++..}, at: [<c0268388>] ide_dump_opcode+0x13/0x9b
[...]
stack backtrace:
[<c0104513>] show_trace+0x1b/0x20
[<c01045f1>] dump_stack+0x1f/0x24
[<c013976c>] print_usage_bug+0x1a5/0x1b1
[<c0139e90>] mark_lock+0x2ca/0x4f7
[<c013aa96>] __lockdep_acquire+0x47e/0xaa4
[<c013b536>] lockdep_acquire+0x67/0x7f
[<c030552d>] _spin_lock+0x24/0x32
[<c0268388>] ide_dump_opcode+0x13/0x9b
[<c02688b6>] ide_dump_status+0x4a6/0x4cc
[<c0267ae6>] ide_config_drive_speed+0x32a/0x33a
[<c0262dc5>] piix_tune_chipset+0x2ed/0x2f8
[<c0262e31>] piix_config_drive_xfer_rate+0x61/0xb5
[<c0263a82>] set_using_dma+0x2f/0x60
[<c0263bee>] ide_write_setting+0x4a/0xc3
[<c02647ca>] generic_ide_ioctl+0x8a/0x47f
[<f886003a>] idecd_ioctl+0xfd/0x133 [ide_cd]
[<c01f1fff>] blkdev_driver_ioctl+0x4b/0x5f
[<c01f2783>] blkdev_ioctl+0x770/0x7bd
[<c017dc0d>] block_ioctl+0x1f/0x21
[<c0189353>] do_ioctl+0x27/0x6e
[<c0189604>] vfs_ioctl+0x26a/0x280
[<c0189667>] sys_ioctl+0x4d/0x7e
[<c0305ed2>] sysenter_past_esp+0x63/0xa1
in ide_dump_opcode() takes the ide_lock in an irq-unsafe manner, i.e. this
function expects to be called with irqs disabled. But
ide_dump_ata[pi]_status() doesnt do that - it enables interrupts specifically.
That is a no-no - what guarantees that another IDE port couldnt generate an
IDE interrupt while we are dumping this error? The fix is to turn the
irq-enabling in these functions into irq-disabling.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove the busproc from pdc202xx_old.c because:
- it handles the obsolete HDIO_TRISTATE_HWIF ioctl instead of the modern
HDIO_SET_BUSSTATE, so treats its argument wrong;
- I don't think that tristating both channels is good idea (probably can't
be done otherwise since there seems to be only single bit controlling this).
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The function ide_timing_compute() fails to *actually* take drive's
specified minimum PIO/DMA cycle times into account -- when doing this, it
calls ide_timing_merge() on the 'struct ide_timing' argument which contains
garbage at the moment, and then ultimately destroys the read cycle time by
quantizing the ide_timing[] entry, instead of copying from that entry to
the argument structure, and only then doing a merge/quantize.
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
During an STR resume cycle, the ide master disk times-out when there is
also a slave present (especially CD). Increasing the timeout in ide-io
from 10,000 to 100,000 fixes this problem.
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This bit us a few kernels ago, and for some reason never made it's way
upstream.
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=144743
Kernel panic - not syncing: drivers/ide/pci/piix.c:231:
spin_lock(drivers/ide/ide.c:c03cef28) already locked by driver/ide/ide-iops.c/1153.
Signed-off-by: Dave Jones <davej@redhat.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Dave Jones <davej@redhat.com>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove a call to hwif->tuneproc() on the error path of
config_chipset_for_dma(), as its single caller
(pdc202xx_config_drive_xfer_rate()) will do the call in that case.
Signed-off-by: Tobias Oed <tobiasoed@hotmail.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The following patch to the common part of the Siemens Gigaset driver
prevents it from trying to send the +++ break sequence if the device has
been disconnected, and removes a couple of assignments which didn't have
any effect.
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Acked-by: Hansjoerg Lipp <hjlipp@web.de>
Cc: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The following patch to the Siemens Gigaset base driver adds graceful
recovery for some frequently encountered error conditions, by retrying
failed control requests (eg. stalled control pipe), and by closing and
reopening the AT command channel when it appears to be stuck.
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Acked-by: Hansjoerg Lipp <hjlipp@web.de>
Cc: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This fixes coverity bug #517.
Since IESIZE is greater than IESIZE_NI1 we might run past the end of
ielist_ni1. This fixes it by using the proper IESIZE_NI1 define.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I am getting more or less reproducible crashes from the CAPI subsystem
using the fcdsl driver:
Unable to handle kernel NULL pointer dereference at virtual address 00000010
printing eip:
c39bbca4
*pde = 00000000
Oops: 0000 [#1]
Modules linked in: netconsole capi capifs 3c59x mii fcdsl kernelcapi uhci_hcd usbcore ide_cd cdrom
CPU: 0
EIP: 0060:[<c39bbca4>] Tainted: P VLI
EFLAGS: 00010202 (2.6.16.11 #3)
EIP is at handle_minor_send+0x17a/0x241 [capi]
eax: c24abbc0 ebx: c0b4c980 ecx: 00000010 edx: 00000010
esi: c1679140 edi: c2783016 ebp: 0000c28d esp: c0327e24
ds: 007b es: 007b ss: 0068
Process swapper (pid: 0, threadinfo=c0326000 task=c02e1300)
Stack: <0>000005b4 c1679180 00000000 c28d0000 c1ce04e0 c2f69654 c221604e c1679140
c39bc19a 00000038 c20c0400 c075c560 c1f2f800 00000000 c01dc9b5 c1e96a40
c075c560 c2ed64c0 c1e96a40 c01dcd3b c2fb94e8 c075c560 c0327f00 c1e96a40
Call Trace:
[<c39bc19a>] capinc_tty_write+0xda/0xf3 [capi]
[<c01dc9b5>] ppp_sync_push+0x52/0xfe
[<c01dcd3b>] ppp_sync_send+0x1f5/0x204
[<c01d9bc1>] ppp_push+0x3e/0x9c
[<c01dacd4>] ppp_xmit_process+0x422/0x4cc
[<c01daf3f>] ppp_start_xmit+0x1c1/0x1f6
[<c0213ea5>] qdisc_restart+0xa7/0x135
[<c020b112>] dev_queue_xmit+0xba/0x19e
[<c0223f69>] ip_output+0x1eb/0x236
[<c0220907>] ip_forward+0x1c1/0x21a
[<c021fa6c>] ip_rcv+0x38e/0x3ea
[<c020b4c2>] netif_receive_skb+0x166/0x195
[<c020b55e>] process_backlog+0x6d/0xd2
[<c020a30f>] net_rx_action+0x6a/0xff
[<c0112909>] __do_softirq+0x35/0x7d
[<c0112973>] do_softirq+0x22/0x26
[<c0103a9d>] do_IRQ+0x1e/0x25
[<c010255a>] common_interrupt+0x1a/0x20
[<c01013c5>] default_idle+0x2b/0x53
[<c0101426>] cpu_idle+0x39/0x4e
[<c0328386>] start_kernel+0x20b/0x20d
Code: c0 e8 b3 b6 77 fc 85 c0 75 10 68 d8 c8 9b c3 e8 82 3d 75 fc 8b 43 60 5a eb 50 8d 56 50 c7 00 00 00 00 00 66 89 68 04 eb 02 89
ca <8b> 0a 85 c9 75 f8 89 02 89 da ff 46 54 8b 46 10 e8 30 79 fd ff
<0>Kernel panic - not syncing: Fatal exception in interrupt
That oops took me to the "ackqueue" implementation in capi.c. The crash
occured in capincci_add_ack() (auto-inlined by the compiler).
I read the code a bit and finally decided to replace the custom linked list
implementation (struct capiminor->ackqueue) by a struct list_head. That
did not solve the crash, but produced the following interresting oops:
Unable to handle kernel paging request at virtual address 00200200
printing eip:
c39bb1f5
*pde = 00000000
Oops: 0002 [#1]
Modules linked in: netconsole capi capifs 3c59x mii fcdsl kernelcapi uhci_hcd usbcore ide_cd cdrom
CPU: 0
EIP: 0060:[<c39bb1f5>] Tainted: P VLI
EFLAGS: 00010246 (2.6.16.11 #3)
EIP is at capiminor_del_ack+0x18/0x49 [capi]
eax: 00200200 ebx: c18d41a0 ecx: c1385620 edx: 00100100
esi: 0000d147 edi: 00001103 ebp: 0000d147 esp: c1093f3c
ds: 007b es: 007b ss: 0068
Process events/0 (pid: 3, threadinfo=c1092000 task=c1089030)
Stack: <0>c2a17580 c18d41a0 c39bbd16 00000038 c18d41e0 00000000 d147c640 c29e0b68
c29e0b90 00000212 c29e0b68 c39932b2 c29e0bb0 c10736a0 c0119ef0 c399326c
c10736a8 c10736a0 c10736b0 c0119f93 c011a06e 00000001 00000000 00000000
Call Trace:
[<c39bbd16>] handle_minor_send+0x1af/0x241 [capi]
[<c39932b2>] recv_handler+0x46/0x5f [kernelcapi]
[<c0119ef0>] run_workqueue+0x5e/0x8d
[<c399326c>] recv_handler+0x0/0x5f [kernelcapi]
[<c0119f93>] worker_thread+0x0/0x10b
[<c011a06e>] worker_thread+0xdb/0x10b
[<c010c998>] default_wake_function+0x0/0xc
[<c011c399>] kthread+0x90/0xbc
[<c011c309>] kthread+0x0/0xbc
[<c0100a65>] kernel_thread_helper+0x5/0xb
Code: 7e 02 89 ee 89 f0 5a f7 d0 c1 f8 1f 5b 21 f0 5e 5f 5d c3 56 53 8b 48 50 89 d6 89 c3 8b 11 eb 2f 66 39 71 08 75 25 8b 41 04 8b 11 <89> 10 89 42 04 c7 01 00 01 10 00 89 c8 c7 41 04 00 02 20 00 e8
The interresting part of it is the "virtual address 00200200", which is
LIST_POISON2. I thought about some race condition, but as this is an UP
system, it leads to questions on how it can happen. If we look at EFLAGS:
00010202, we see that interrupts are enabled at the time of the crash
(eflags & 0x200).
Finally, I don't understand all the capi code, but I think that
handle_minor_send() is racing somehow against capi_recv_message(), which
call both capiminor_del_ack(). So if an IRQ occurs in the middle of
capiminor_del_ack() and another instance of it is invoked, it leads to
linked list corruption.
I came up with the following patch. With this, I could not reproduce the
crash anymore. Clearly, this is not the correct fix for the issue. As this
seems to be some locking issue, there might be more locking issues in that
code. For example, doesn't the whole struct capiminor have to be locked
somehow?
Cc: Carsten Paeth <calle@calle.de>
Cc: Kai Germaschewski <kai.germaschewski@gmx.de>
Cc: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add a GTOD clocksource driver based on the Geode SCx200's Hi-Res Timer.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add a CLOCKSOURCE_MASK macro to simplify initializing the mask for a struct
clocksource, and use it to replace literal mask constants in the various
clocksource drivers.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- written on init only, accessed for every timer read --> __read_mostly
- fix broken sentence
Signed-off-by: Andreas Mohr <andi@lisas.de>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
As suggested by Roman Zippel, change clocksource functions to use
clocksource_xyz rather then xyz_clocksource to avoid polluting the
namespace.
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Implement the time sources for i386 (acpi_pm, cyclone, hpet, pit, and tsc).
With this patch, the conversion of the i386 arch to the generic timekeeping
code should be complete.
The patch should be fairly straight forward, only adding the new clocksources.
[hirofumi@mail.parknet.co.jp: acpi_pm cleanup]
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
As part of the i386 conversion to the generic timekeeping infrastructure, this
introduces a new tsc.c file. The code in this file replaces the TSC
initialization, management and access code currently in timer_tsc.c (which
will be removed) that we want to preserve.
The code also introduces the following functionality:
o tsc_khz: like cpu_khz but stores the TSC frequency on systems that do not
change TSC frequency w/ CPU frequency
o check/mark_tsc_unstable: accessor/modifier flag for TSC timekeeping
usability
o minor cleanups to calibration math.
This patch also includes a one line __cpuinitdata fix from Zwane Mwaikambo.
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
John's about to nuke x86's monotonic clock without grepping for it first. The
patch lamely borrows the ppc64 code for x86.
hangcheck-timer shouldn't be doing it this way
a) HAVE_MONOTONIC should be CONFIG_MONOTONIC_CLOCK and it should be defined
in arch/xxx/Kconfig.
b) That ifdef tangle shouldn't be in hangcheck-timer.c. It should be using
arch-provided helper functions, which CONFIG_MONOTONIC_CLOCK-enabling
architectures implement in arch/something.c
Cc: john stultz <johnstul@us.ibm.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch series replaces the old non-generic Hardware Random Number
Generator support by a fully generic RNG API.
This makes it possible to register additional RNGs from modules. With this
patch series applied, Laptops with a bcm43xx chip (PowerBook) have a HW RNG
available now.
Additionally two new RNG drivers are added for the "ixp4xx" and "omap"
devices. (Written by Deepak Saxena). This patch series includes the old
patches by Deepak Saxena.
The old x86-rng driver has beed split.
The userspace RNG daemon can later be updated to select the RNG through
/sys/class/misc/hw_random/ for convenience. For now it is sufficient to use
cat and echo -n on the sysfs attributes.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch converts the combination of list_del(A) and list_add(A, B) to
list_move(A, B) under drivers/.
Acked-by: Corey Minyard <minyard@mvista.com>
Cc: Ben Collins <bcollins@debian.org>
Acked-by: Roland Dreier <rolandd@cisco.com>
Cc: Alasdair Kergon <dm-devel@redhat.com>
Cc: Gerd Knorr <kraxel@bytesex.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frank Pavlic <fpavlic@de.ibm.com>
Acked-by: Matthew Wilcox <matthew@wil.cx>
Cc: Andrew Vasquez <linux-driver@qlogic.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Signed-off-by: Akinobu Mita <mita@miraclelinux.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch converts the combination of list_del(A) and list_add(A, B) to
list_move(A, B).
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Akinobu Mita <mita@miraclelinux.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Magic sysrq fails to work on many keyboards, particulary most of notebook
keyboards. This patch fixes it.
The idea is quite simple: Discard the SysRq break code if Alt is still being
held down. This way the broken keyboard can send the break code (or the user
with a normal keyboard can release the SysRq key) and the kernel waits until
the next key is pressed or the Alt key is released.
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There's a problem in drivers/bluetooth/dtl1_cs.c::dtl1_hci_send_frame()
If bt_skb_alloc() returns NULL, then skb_reserve(s, NSHL); will cause a
NULL pointer deref - ouch. If we can't allocate the resources we require
we need to tell the caller by returning -ENOMEM.
Found by the coverity checker as bug #409
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In a testament to the utter simplicity and logic of the English
language ;-), I found a single correct use - in kernel/panic.c - and
10-15 incorrect ones.
Signed-Off-By: Lee Revell <rlrevell@joe-job.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
While reviewing the IRQ autoprobing code i found the attached buglet.
probe_irq_on()/off() calls must always be in pairs, because the generic IRQ
code uses a global semaphore to serialize all autoprobing activites.
(which does make sense) The ARM code's probe_irq_*() implementation does
not do this, but if this driver is ever used on another platform, this bug
might bite.
(It probably does not trigger in practice, because a zero probing mask
returned should be rare - but still.)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
V4L2_CID_MPEG_STREAM_VBI_FMT controls if and how VBI data is embedded in
an MPEG stream. Currently only one format is supported: the format designed
for the ivtv driver. This should be extended with new standard formats
(such as defined for DVB) in the future.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Fixes the weird and incorrect condition in VIDIOC_S_FREQUENCY.
The tuner should always be switched to the mode specified in the
v4l2_frequency struct. Much simpler and also corresponding to the
v4l2 specification.
The old condition made it impossible to switch from radio to
analog tv mode using VIDIOC_S_FREQUENCY. Instead the (tv) frequency would
be given to the radio tuner.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Added support for the msp34x5 audio dac. Analog sound output of
Technotrend DVB-C 2300 (aka Hauppauge Nexus-CA) works now.
Signed-off-by: Tim Kaiser <timkaiser@t-online.de>
Signed-off-by: Marco Schluessler <marco@lordzodiac.de>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Thanks to Oliver Endriss for spotting this.
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
This patch creates a new Kconfig menu option, entitled,
"Blackbird MPEG encoder support (cx2388x + cx23416)"
so that the cx88-blackbird mpeg encoder module can be
chosen separately.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
The cx2341x mpeg encoder module is used by cx88-blackbird, pvrusb2 and
the external ivtv driver. This patch allows for cx2341x to be selected without
having to also select cx88-blackbird. This will be needed to build the external
ivtv driver or the standalone pvrusb2 driver against kernel 2.6.18
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Thanks to Johannes Stezenbach for pointing it out
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
i386 assembly has more compact instructions for accessing 7-bit offsets.
So by moving the large members to the end of the structure we can save
quite a bit of code size. This patch shaves about 10% or 300 bytes off
the padlock-aes file.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Up until now algorithms have been happy to get a context pointer since
they know everything that's in the tfm already (e.g., alignment, block
size).
However, once we have parameterised algorithms, such information will
be specific to each tfm. So the algorithm API needs to be changed to
pass the tfm structure instead of the context pointer.
This patch is basically a text substitution. The only tricky bit is
the assembly routines that need to get the context pointer offset
through asm-offsets.h.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The 'private' member of struct input_dev is a void*, so no need to
cast it when assigning it to a struct iforce* variable.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Add support for the H-Wheel present on Microsoft Intellimouse 4.0
(AKA "tilt mouse")
Signed-off-by: Pozsar Balazs <pozsy@uhulinux.hu>
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Make atkbd report HANGEUL/HANJA keys by default and use correct scan
codes for these keys (they were swapped). Also make sure their scancodes
reported as EV_MSC/MSC_SCAN events.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Fix a mispelling of the korean alphabet name in the input subsystem.
See http://en.wikipedia.org/wiki/Hangeul#Names for more details.
KEY_HANGUEL left to not break people
Signed-off-by: Jerome Pinot <ngc891@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Add an input device for the button and lid switch so that userspace gets
notified about the user pressing them via the standard input layer.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Name, phys and uniq are quite often constant strings in moules implementing
particular input device. If a module unregisters input device and then gets
unloaded, the device could still be present in memory (pinned via sysfs),
but aforementioned members would point to some random memory. Set them all
to NULL when unregistering so sysfs handlers won't try dereferencing them.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Change all sprintfs into snprintfs to make sure we won't stomp on
data adjacent to our buffers.
Noticed by Wouter Paesen <wouter@kangaroot.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
ColdFire serial driver support for the new 532x CPU family UARTs.
Patch submitted by Matt Waddel <Matt.Waddel@freescale.com>.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Specify the struct mapping used on the new Freescale 532x CPU family's
FEC ethernet core.
Patch submitted by Matt Waddel <Matt.Waddel@freescale.com>.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
IB/iser: iSER Kconfig and Makefile
IB/iser: iSER handling of memory for RDMA
IB/iser: iSER RDMA CM (CMA) and IB verbs interaction
IB/iser: iSER initiator iSCSI PDU and TX/RX
IB/iser: iSCSI iSER transport provider high level code
IB/iser: iSCSI iSER transport provider header file
IB/uverbs: Remove unnecessary list_del()s
IB/uverbs: Don't free wr list when it's known to be empty
* git://git.linux-nfs.org/pub/linux/nfs-2.6: (51 commits)
nfs: remove nfs_put_link()
nfs-build-fix-99
git-nfs-build-fixes
Merge branch 'odirect'
NFS: alloc nfs_read/write_data as direct I/O is scheduled
NFS: Eliminate nfs_get_user_pages()
NFS: refactor nfs_direct_free_user_pages
NFS: remove user_addr, user_count, and pos from nfs_direct_req
NFS: "open code" the NFS direct write rescheduler
NFS: Separate functions for counting outstanding NFS direct I/Os
NLM: Fix reclaim races
NLM: sem to mutex conversion
locks.c: add the fl_owner to nlm_compare_locks
NFS: Display the chosen RPCSEC_GSS security flavour in /proc/mounts
NFS: Split fs/nfs/inode.c
NFS: Fix typo in nfs_do_clone_mount()
NFS: Fix compile errors introduced by referrals patches
NFSv4: Ensure that referral mounts bind to a reserved port
NFSv4: A root pathname is sent as a zero component4
NFSv4: Follow a referral
...
* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (244 commits)
V4L/DVB (4210b): git-dvb: tea575x-tuner build fix
V4L/DVB (4210a): git-dvb versus matroxfb
V4L/DVB (4209): Added some BTTV PCI IDs for newer boards
Fixes some sync issues between V4L/DVB development and GIT
V4L/DVB (4206): Cx88-blackbird: always set encoder height based on tvnorm->id
V4L/DVB (4205): Merge tda9887 module into tuner.
V4L/DVB (4203): Explicitly set the enum values.
V4L/DVB (4202): allow selecting CX2341x port mode
V4L/DVB (4200): Disable bitrate_mode when encoding mpeg-1.
V4L/DVB (4199): Add cx2341x-specific control array to cx2341x.c
V4L/DVB (4198): Avoid newer usages of obsoleted experimental MPEGCOMP API
V4L/DVB (4197): Port new MPEG API to saa7134-empress with saa6752hs
V4L/DVB (4196): Port cx88-blackbird to the new MPEG API.
V4L/DVB (4193): Update cx2341x fw encoding API doc.
V4L/DVB (4192): Use control helpers for saa7115, cx25840, msp3400.
V4L/DVB (4191): Add CX2341X MPEG encoder module.
V4L/DVB (4190): Add helper functions for control processing to v4l2-common.
V4L/DVB (4189): Add videodev support for VIDIOC_S/G/TRY_EXT_CTRLS.
V4L/DVB (4188): Add new MPEG control/ioctl definitions to videodev2.h
V4L/DVB (4186): Add support for the DNTV Live! mini DVB-T card.
...
Add support for SyncLink GT2 adapter to driver.
Signed-off-by: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix diagnostics error reporting that was being overwritten by incorrect use
of return codes from individual diagnostic functions.
Signed-off-by: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add ability to return HDLC CRC to user application.
Signed-off-by: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add custom HDLC idle pattern feature.
It allows the user to specify an arbitrary 8 or 16 bit repeating pattern on
the transmit data pin between HDLC frames.
In most cases the idle pattern is continuous ones or flags as supported by off
the shelf synchronous controllers and defined in the ISO3309 standard. Some
applications (radio/satellite modems, connections to legacy military hardware)
require non-standard patterns.
Signed-off-by: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
drivers/net/irda/irda-usb.c: In function 'stir421x_patch_device':
drivers/net/irda/irda-usb.c:1108: warning: format '%u' expects type 'unsigned int', but argument 4 has type 'size_t'
Cc: Greg KH <greg@kroah.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add DMI interface functions to a new Firmware Interfaces chapter in the
kernel-api DocBook. Clean up kernel-doc in drivers/firmware/dmi_scan.c.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add an LED trigger acts like a heart beat. This can be used as a
replacement of CONFIG_HEARTBEAT code exists in some arch's timer code.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: Richard Purdie <rpurdie@rpsys.net>
Cc: "Nish Aravamudan" <nish.aravamudan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix memory leak caused by incorrect use of tty buffer facility. tty
buffers are allocated but never processed by call to tty_flip_buffer_push
so they accumulate on the full buffer list. Current code uses the buffers
as a temporary storage for data before passing it directly to the line
discipline.
Signed-off-by: Paul Fulghum <paulkf@microgate.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Make each one fit on a line so it's easier to read. I re-ordered
COMPAQ_CISSC/0x4091, which was out of order. I double-checked these, but it
would be good if you'd also check them to make sure I didn't miss any.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Jeff Garzik <jeff@garzik.org>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
cciss is full of inconsistent style ("for (" vs. "for(", lines that end with
whitespace, lines beginning with a mix of spaces & tabs, etc).
This patch changes only whitespace.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Typical Linux style is "return -EINVAL", not "return(-EINVAL)".
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix a few spelling errors.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It's easier to verify loop bounds if the array name is mentioned the for()
statement that steps through the array.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We already print "cciss: using DAC cycles" or similar for every adapter found:
why not just identify the device we're talking about and include other useful
information?
Jeff Garzik <jeff@garzik.org>:
Although this patch is correct, I would consider using dev_printk() rather
than referencing pci_name() in printk() arguments.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We should call pci_request_regions() to claim all resources the device
decodes. Previously, we claimed only the I/O port range.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If something fails after we call pci_enable_device(), we should call
pci_disable_device() before returning the failure.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Update loop.c to use a kthread instead of a deprecated kernel_thread for
loop devices.
[akpm@osdl.org: don't change the thread's name]
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Another bunch of checks in the char drivers .put_char() and .write()
routines, where tty can never be NULL. This patch removes these checks to
save some code. Coverity choked at those with the following bug ids:
isicom.c 767, 766
specialix.c 773, 774
synclink_cs.c 779, 781
synclink_gt.c 784, 785
synclinkmp.c 784, 785
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Cc: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
coverity choked at another two !tty checks, in places where tty can
never be NULL. Since it removes some code we should remove
these checks. (Coverity ids #763,#762)
Signed-off-by Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
coverity choked at two !tty checks, in places where tty can never be NULL.
Since it removes some code we should remove these checks. (Coverity ids
#763,#762)
[akpm@osdl.org: even cleaner!]
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In the error case, add_msg() gets called from timer functions, so should
be using GFP_ATOMIC instead of GFP_KERNEL.
Ref: http://bugzilla.kernel.org/show_bug.cgi?id=6659. Thanks to Christian
Werner <chw@ch-werner.de> for reporting, and for the initial fix.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Priority: not critical.
Mark 3 functions __init. Saves a little memory.
This makes these functions' calls to AdvWaitEEPCmd() (which is __init)
be clean (i.e., eliminates text -> init -> text call chain).
Fix multiple section mismatch warnings:
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7a22) and 'AdvSet38C0800EEPConfig'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7a4e) and 'AdvSet38C0800EEPConfig'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7a79) and 'AdvSet38C0800EEPConfig'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7aa2) and 'AdvSet38C0800EEPConfig'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7abb) and 'AdvSet38C0800EEPConfig'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7ae0) and 'AdvSet38C1600EEPConfig'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7b0c) and 'AdvSet38C1600EEPConfig'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7b37) and 'AdvSet38C1600EEPConfig'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7b60) and 'AdvSet38C1600EEPConfig'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7b79) and 'AdvSet38C1600EEPConfig'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7b9e) and 'AdvExeScsiQueue'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7bca) and 'AdvExeScsiQueue'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7bf5) and 'AdvExeScsiQueue'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7c1e) and 'AdvExeScsiQueue'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7c37) and 'AdvExeScsiQueue'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Priority: tossup.
In theory some of these (previously) __init functions could be called
after init, but that problem has not been observed AFAIK.
There were 2 cases of cleanup_module() (module_exit) calling __init
functions (clear_requested_irq() & have_requested_irq()).
These are more serious, but still not observed AFAIK.
Fix sections mismatch:
WARNING: drivers/char/ip2/ip2main.o - Section mismatch: reference to .init.text: from .text between 'cleanup_module' (at offset 0x228b) and 'ip2_loadmain'
WARNING: drivers/char/ip2/ip2main.o - Section mismatch: reference to .init.text: from .text between 'cleanup_module' (at offset 0x22ae) and 'ip2_loadmain'
WARNING: drivers/char/ip2/ip2main.o - Section mismatch: reference to .init.text: from .text between 'ip2_loadmain' (at offset 0x2501) and 'set_irq'
WARNING: drivers/char/ip2/ip2main.o - Section mismatch: reference to .init.text: from .text between 'ip2_loadmain' (at offset 0x25de) and 'set_irq'
WARNING: drivers/char/ip2/ip2main.o - Section mismatch: reference to .init.text: from .text between 'ip2_loadmain' (at offset 0x2698) and 'set_irq'
WARNING: drivers/char/ip2/ip2main.o - Section mismatch: reference to .init.text: from .text between 'ip2_loadmain' (at offset 0x2922) and 'set_irq'
WARNING: drivers/char/ip2/ip2main.o - Section mismatch: reference to .init.text: from .text between 'ip2_loadmain' (at offset 0x299e) and 'set_irq'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Priority: not critical.
Make __mcdx_init() __init and static. Saves a little memory.
Fix section mismatch warning and make the function static while there:
WARNING: drivers/cdrom/mcdx.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x8be) and 'mcdx_transfer'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
