Commit Graph

14 Commits

Author SHA1 Message Date
H. Peter Anvin
37ba7ab5e3 x86, boot: make kernel_alignment adjustable; new bzImage fields
Make the kernel_alignment field adjustable; this allows us to set it
to a large value (intended to be 16 MB to avoid ZONE_DMA contention,
memory holes and other weirdness) while a smart bootloader can still
force a loading at a lesser alignment if absolutely necessary.

Also export pref_address (preferred loading address, corresponding to
the link-time address) and init_size, the total amount of linear
memory the kernel will require during initialization.

[ Impact: allows better kernel placement, gives bootloader more info ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-11 17:44:39 -07:00
H. Peter Anvin
77d1a49995 x86, boot: make symbols from the main vmlinux available
Make symbols from the main vmlinux, as opposed to just
compressed/vmlinux, available to header.S.  Also, export a few
additional symbols.

This will be used in a subsequent patch to export the total memory
footprint of the kernel.

[ Impact: enable future enhancement ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-11 14:40:50 -07:00
H. Peter Anvin
5e47c478b0 x86: remove zImage support
Impact: obsolete feature removal

The zImage kernel format has been functionally unused for a very long
time.  It is just barely possible to build a modern kernel that still
fits within the zImage size limit, but it is highly unlikely that
anyone ever uses it.  Furthermore, although it is still supported by
most bootloaders, it has been at best poorly tested (or not tested at
all); some bootloaders are even known to not support zImage at all and
not having even noticed.

Also remove some really obsolete constants that no longer have any
meaning.

LKML-Reference: <49B703D4.1000008@zytor.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-03-11 11:00:00 -07:00
Jeremy Fitzhardinge
0341c14da4 x86: use _types.h headers in asm where available
In general, the only definitions that assembly files can use
are in _types.S headers (where available), so convert them.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-02-13 11:35:01 -08:00
Paul Bolle
9985647891 x86 setup: drop SWAP_DEV
Impact: None (cleanup)

SWAP_DEV is unused since 2.6.23-rc1. The comment was already incorrect
since (at least) 2.6.12.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-09-16 09:57:36 -07:00
Huang, Ying
8b664aa66e x86, boot: add linked list of struct setup_data
This patch adds a field of 64-bit physical pointer to NULL terminated
single linked list of struct setup_data to real-mode kernel
header. This is used as a more extensible boot parameters passing
mechanism.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-26 21:34:42 +02:00
Ian Campbell
87253d1b4f x86: boot protocol updates
Also update field names to simply payload_{offset,length} so as to not rule
out uncompressed images.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 17:40:48 +02:00
Ingo Molnar
52b387197b x86: bump image header to version 2.08.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-17 17:40:46 +02:00
Ian Campbell
099e137726 x86: use ELF format in compressed images.
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: Ian Campbell <ijc@hellion.org.uk>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: virtualization@lists.linux-foundation.org
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-17 17:40:46 +02:00
H. Peter Anvin
cf8fa920cb i386: handle an initrd in highmem (version 2)
The boot protocol has until now required that the initrd be located in
lowmem, which makes the lowmem/highmem boundary visible to the boot
loader.  This was exported to the bootloader via a compile-time
field.  Unfortunately, the vmalloc= command-line option breaks this
part of the protocol; instead of adding yet another hack that affects
the bootloader, have the kernel relocate the initrd down below the
lowmem boundary inside the kernel itself.

Note that this does not rely on HIGHMEM being enabled in the kernel.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:32:51 +01:00
Jens Rottmann
16252da654 x86 setup: don't recalculate ss:esp unless really necessary
In order to work around old LILO versions providing an invalid ss
register, the current setup code always sets up a new stack,
immediately following .bss and the heap. But this breaks LOADLIN.

This rewrite of the workaround checks for an invalid stack (ss!=ds)
first, and leaves ss:sp alone otherwise (apart from aligning esp).

[hpa note: LOADLIN has a number of arbitrary hard-coded limits that
are being pushed up against.  Without some major revision of LOADLIN
itself it will not be sustainable keeping it alive.  This gives it
another brief lease on life, however.  This patch also helps the
cmdline truncation problem with old versions of SYSLINUX.]

Signed-off-by: Jens Rottmann <JRottmann at LiPPERT-AT. de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2007-11-28 18:17:17 -08:00
H. Peter Anvin
6b6815c6d5 x86 setup: handle boot loaders which set up the stack incorrectly
Apparently some specific versions of LILO enter the kernel with a
stack pointer that doesn't match the rest of the segments.  Make our
best attempt at untangling the resulting mess.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2007-10-25 19:55:03 -07:00
Rusty Russell
a24e785111 i386: paravirt boot sequence
This patch uses the updated boot protocol to do paravirtualized boot.
If the boot version is >= 2.07, then it will do two things:

 1. Check the bootparams loadflags to see if we should reload the
    segment registers and clear interrupts.  This is appropriate
    for normal native boot and some paravirtualized environments, but
    inapproprate for others.

 2. Check the hardware architecture, and dispatch to the appropriate
    kernel entrypoint.  If the bootloader doesn't set this, then we
    simply do the normal boot sequence.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Zachary Amsden <zach@vmware.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 08:13:17 -07:00
Thomas Gleixner
96ae6ea0be i386: move boot
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 11:16:45 +02:00