If all the codecs report ClkStopOK (OK to stop bus clock) after being put to
D3, this patch will reset the HDA link before the controller is put to D3.
So the link will be in reset during system or runtime suspend, the bus clock
stops and the codecs are in D3(ClkStop) state.
This may help to reduce power consumption by dozens of mW on some peripheral
hda codecs.
Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like the X220, this quirk was added to support docking station,
so enable the fixup instead.
According to Jan, the generic parser works equal or better
than the current parser. This was tested under a 3.9 kernel.
Reported-by: Jan Alexander Steffens <jan.steffens@gmail.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some VIA codecs like VT1708S have Mic boost amps in the mic pins but
they aren't exposed in the capability bits. In the past driver code,
we override the pin caps and create mic boost controls forcibly.
While transition to the generic parser, we lost the mic boost controls
although the pin caps are still overridden, because the generic parser
code checks the widget caps, too.
So this patch adds a new helper function to allow the override of the
given widget capability bits, and makes VIA codecs driver to add the
missing input-amp capability bit.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59861
Cc: <stable@vger.kernel.org> [v3.9+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For Intel Haswell HDMI codecs, the pins choose converter 0 by default.
This would cause conflict when playing audio on unused pins,the pin with
physical device connected would get audio data too.
i.e. Pin 0/1/2 default choose converter 0, pin 1 has HDMI monitor connected.
when play audio on Pin 0 or pin 2, pin 1 could get audio data too.
This patch configure unused pins to choose different converter.
Signed-off-by: Wang Xingchao <xingchao.wang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a selection to a converter MUX is changed in hdmi_pcm_open(), it
should be cached so that the given connection can be restored properly
at PM resume. We need just to replace the corresponding
snd_hda_codec_write() call with snd_hda_codec_write_cache().
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Haswell converters maybe in wrong power state before usage.
i.e. only converter 0 is in D0, converter 1/2 are in D3.
When pin choose converter 1/2, there's no audio output, this
cause dependency when playing differnt stream on pins.
AUD_PWRST ConvertorA_Widget_Power_State_Current D0
AUD_PWRST ConvertorA_Widget_Power_State_Requsted D0
AUD_PWRST ConvertorB_Widget_Power_State_Current D3
AUD_PWRST ConvertorB_Widget_Power_State_Requested D3
AUD_PWRST ConvC_Widget_PwrSt_Curr D3
AUD_PWRST ConvC_Widget_PwrSt_Req D3
This patch check converter's power state and set D0 if it's in D3 mode.
Signed-off-by: Wang Xingchao <xingchao.wang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The refactoring by commit 9040d102 introduced the new function
snd_hda_check_power_state(). This function is supposed to return true
if the state already reached to the target state, but it actually
returns false for that. An utterly stupid typo while copy & paste.
Fortunately this didn't influence on much behavior because powering up
AFG usually powers up the child widgets, too. But the finer power
control must have been broken by this bug.
Cc: <stable@vger.kernel.org> [v3.9+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These headset jacks keep coming in on more and more platforms, and
it's possible I don't catch them all. Make it easier to test and
verify by making models.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
* for-linus: (635 commits)
ALSA: usb-audio: Fix invalid volume resolution for Logitech HD Webcam c310
ALSA: hda - Fix pin configurations for MacBook Air 4,2
ALSA: usb-audio: work around Android accessory firmware bug
ALSA: hda - Headset mic support for three more machines
Linux 3.10-rc6
smp.h: Use local_irq_{save,restore}() in !SMP version of on_each_cpu().
powerpc: Fix missing/delayed calls to irq_work
powerpc: Fix emulation of illegal instructions on PowerNV platform
powerpc: Fix stack overflow crash in resume_kernel when ftracing
snd_pcm_link(): fix a leak...
use can_lookup() instead of direct checks of ->i_op->lookup
move exit_task_namespaces() outside of exit_notify()
fput: task_work_add() can fail if the caller has passed exit_task_work()
xfs: don't shutdown log recovery on validation errors
xfs: ensure btree root split sets blkno correctly
xfs: fix implicit padding in directory and attr CRC formats
xfs: don't emit v5 superblock warnings on write
mei: me: clear interrupts on the resume path
mei: nfc: fix nfc device freeing
mei: init: Flush scheduled work before resetting the device
...
MacBook Air 4,2 requires the whole default pin configuration table to
be overridden by the driver, as usual, as Apple's machines don't set
up properly after boot. Otherwise mic won't work, and other ill
effect may happen.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59381
Reported-and-tested-by: Peter John Hartman <peterjohnhartman@gmail.com>
Cc: <stable@vger.kernel.org> [v3.9+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
They need these quirks to have headset mic support.
BugLink: https://bugs.launchpad.net/bugs/1189363
Tested-by: Shawn Wang <shawn.wang@canonical.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a codec is powered off, some systems don't respond properly after
D3 FG transition, while the driver still expects the response and
tries to fall back to different modes (polling and single-cmd). When
the fallback happens, the driver stays in that mode, and falling back
to the single-cmd mode means it'll loose the unsol event handling,
too.
The unresponsiveness at D3 isn't too serious, thus this fallback is
mostly superfluous. We can gracefully ignore the error there so that
the driver keeps the normal operation mode.
This patch adds a new bit flag for codec read/write, set in the power
transition stage, which is notified to the controller driver via a new
bus->no_response_fallback flag.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_hda_codec_read(), snd_hda_codec_write() & co take the argument
"direct" that indicates whether the given NID is a direct reference or
an indirect reference. However, the indirect reference is practically
unimplemented and never exists. And moreover, we don't need the
indication of indirect reference at this high level, as NID can be
represented in 16bit values at this point.
Meanwhile, there are some cases where it'd be nice to give some
operational options to these functions. So, we can reuse this
argument as a new bit flag! Pretty frugal, eh?
All callers so far pass zero to this argument, thus there is no
behavior change by this replacement.
The real usage of this new bit option will be added in the following
patches.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently HDMI codec driver sets the hard dependency (reverse
selection) on CONFIG_SND_DYNAMIC_MINORS because the recent codecs may
support more than two PCMs. But, this doesn't mean that we need
always this option, since there can be a single PCM stream even with
the modern codecs.
This patch drops the hard dependency again but give more sensible
error message when no enough PCMs are available due to the lack of
this option.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
* for-linus: (778 commits)
ALSA: usb-audio - Fix invalid volume resolution on Logitech HD webcam c270
ALSA: usb-audio - Apply Logitech QuickCam Pro 9000 quirk only to audio iface
ALSA: hda/via - Clean up duplicated codes
ALSA: hda/via - Fix wrongly cleared pins after suspend on VT1802
ALSA: hda - Add keep_eapd_on flag to generic parser
ALSA: hda - Allow setting automute/automic hooks after parsing
ALSA: hda/via - Disable broken dynamic power control
ALSA: usb-audio: fix Roland/Cakewalk UM-3G support
ALSA: hda - Add headset quirk for two Dell machines
ALSA: hda - add dock support for Thinkpad T431s
ALSA: sis7019: fix error return code in sis_chip_create()
ASoC: cs42l52: fix default value for MASTERA_VOL.
ASoC: wm8994: check for array index returned
ASoC: wm8994: Fix reporting of accessory removal on WM8958
ASoC: wm8994: use the correct pointer to get the control value
Linux 3.10-rc3
ipc/sem.c: Fix missing wakeups in do_smart_update_queue()
score: remove redundant kcore_list entries
ASoC: wm5110: Correct DSP4R Mixer control name
ARC: lazy dcache flush broke gdb in non-aliasing configs
...
This fixes the internal and external mic on Ordissimo EVE2, also known
as Malata PC-B1303.
We still don't know how to detect mic jack like Realtek's windows
driver.
Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The previous commit was written in the way to make the backport to
3.9.y easier, and left the duplicated open codes intentionally.
Now let's clean up the duplicated codes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
VIA driver has a special suspend handling only for VT1802 to reduce
the pop noise. During the transition to the generic parser, the
behavior of snd_hda_set_pin_ctl() was also changed to modify the
cached values, too. And this caused a regression where the pin is
still cleared even after the resume (including the resume from power
save), resulting in the silent output.
The fix is simply to replace snd_hda_set_pin_ctl() with the explicit
call of snd_hda_codec_write() again.
Reported-by: Alex Riesen <raa.lkml@gmail.com>
Cc: <stable@vger.kernel.org> [v3.9]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
VT1802 codec seems to reset EAPD of other pins in the hardware level,
and this was another reason of the silent headphone output on some
machines. As a workaround, introduce a new flag indicating to keep
the EPAD on to the generic parser, and set it in patch_via.c.
Reported-by: Alex Riesen <raa.lkml@gmail.com>
Cc: <stable@vger.kernel.org> [v3.9]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some codec drivers (VIA codecs and some Realtek fixups) set the
automute and automic hooks after calling
snd_hda_gen_parse_auto_config(). In the current code, the hook
pointers are referred only in snd_hda_gen_parse_auto_config() and
passed to snd_hda_jack_detect_enable_callback(), thus changing the
hook values won't change the actually called callbacks properly.
This patch fixes this bug by setting the static functions as the
primary callback functions for the jack detection, and let them
calling the appropriate hooks dynamically.
Cc: <stable@vger.kernel.org> [v3.9]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since the transition to the generic parser, the actual routes used
there don't match always with the assumed static paths in some
set_widgets_power_state callbacks. This results in the wrong power
setup in the end. As a temporary workaround, we need to disable the
calls together with the non-functional dynamic power control enum.
Reported-by: Alex Riesen <raa.lkml@gmail.com>
Cc: <stable@vger.kernel.org> [v3.9]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This quirk is required for the headset mic to work on these
two machines.
BugLink: https://bugs.launchpad.net/bugs/1186170
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a model/fixup string "lenovo-dock", for Thinkpad T431s, to allow sound in docking station.
Tested on Lenovo T431s with ThinkPad Mini Dock Plus Series 3
Signed-off-by: Ebben Aries <earies@dscp.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As drvdata is cleared to NULL at probe failure or at removal by the
driver core, we don't have to call pci_set_drvdata(pci, NULL) any
longer in each driver.
The only remaining pci_set_drvdata(NULL) is in azx_firmware_cb() in
hda_intel.c. Since this function itself releases the card instance,
we need to clear drvdata here as well, so that it won't be released
doubly in the remove callback.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The newer HP laptops have SSID 103c:20xx and 103c:21xx, and these
usually have the mic-mute LED on Fn-F8. Let's enable it, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add HD Audio Device PCI ID for the Intel BayTrail platform.
Signed-off-by: Chew, Chiau Ee <chiau.ee.chew@intel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When an inactive path is powered down with spec->power_down_unused
flag, we should check the activity of each widget in the path whether
it's still referred from any active path.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit affdb62b815b38261f09f9d4ec210a35c7ffb1f3.
The commit introduced a regression with AD codecs where the stream is
always clean up. Since the patch is just a minor optimization and
reverting the commit fixes the issue, let's just revert it.
Reported-and-tested-by: Michael Burian <michael.burian@sbg.at>
Cc: <stable@vger.kernel.org> [v3.9+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a revised patch based on Mengdong Lin's fix patch, which is a
supplement to a previous patch [1611a9c9: ALSA: hda - Add fixup for
Haswell to enable all pin and convertor widgets].
Some Haswell BIOS will disable the 2nd and 3rd pin/covertor widgets
when the HD-A controller changes state from D3 to D0. So when the
controller resumes after a system or runtime suspend, these widgets
are disabled and programming these widgets to D0 will cause H/W error
and codec will not respond.
In addition, we found out that some BIOS disables the pins at S3
although it shows up at boot. This confuses the driver utterly, and
the hardware falls into the fatal communication error like the above.
So in this patch, we apply intel_haswell_enable_all_pins() not only as
a fixup to a certain device (with 8086:2010) but to all Haswell
machines. The codec driver basically assumes that all pins are
exposed, so it's anyway better to see them from the beginning. Even
if all pins and converters are shown by this call, there should be no
regression in practice: the pin default configurations are still kept,
thus the disabled pins are handled as disabled by the driver
properly.
Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The interrupt handler azx_interrupt will call azx_update_rirb,
which may call snd_hda_queue_unsol_event, snd_hda_queue_unsol_event
will dereference chip->bus pointer.
The problem is we alloc chip->bus in azx_codec_create
which will be called after we enable IRQ and enable unsolicited
event in azx_probe.
This will cause Oops due dereference NULL pointer. I meet it, good luck:)
[Rearranged the NULL check before the tracepoint and added another
NULL check of bus->workq -- tiwai]
Signed-off-by: Wang YanQing <udknight@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The older Conexant codecs have up to two EAPDs and these are supposed
to be rather statically turned on. The new generic parser code
assumes the dynamic on/off per path usage, thus it resulted in the
silent output on some machines.
This patch fixes the problem by simply assuming the static EAPD on for
such old Conexant codecs as we did until 3.8 kernel.
Reported-and-tested-by: Christopher K. <c.krooss@gmail.com>
Cc: <stable@vger.kernel.org> [v3.9]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The audio driver mistakenly allows 64 bit addresses to be created for
the audio driver on Nvidia GPUs. Unfortunately, the hardware normally
only supports up to 40 bits of DMA. This can cause system panics as
well as misdirected data when the address is > 40 bits as the upper
part the address is truncated.
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Mike Habeck <habeck@sgi.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This enables better volume controls than the current model parser.
Also, because the original quirk for X220 was added to fix
docking station support, add the TP410 fixup instead.
Reported-by: Willian Jon McCann <william.jon.mccann@gmail.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These are being reported as being so noisy at high mic boost levels,
so they are unusable in practice.
Therefore artificially limit the boosts.
BugLink: https://bugs.launchpad.net/bugs/1089795
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When pin default configs are overridden via patch option, these are
evaluated before fixups are applied. Since some fixups change the
whole codec trees and/or add pins dynamically, this sanity check might
not pass when pins aren't present at the time the function is called.
We may reorder the execution, but an easier fix is simply to disable
this sanity check.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix to return a negative error code from the error handling
case instead of 0, as returned elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The flag bus->shutdown implies that the control elements might have
been already destroyed. When a codec is resumed at this state and
tries to call vmaster hook (e.g. in snd_hda_gen_init()), it would
refer to a non-existing object, resulting in Oops in the end.
This patch just adds a check of the flag in the caller side for
avoiding such a crash.
Though, the best would be to clear hook->sw_kctl by the destructor of
the corresponding ctl element, but vmaster uses its own private_free,
it can't be done easily. So let it be for a while.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When graphics initializes the HDMI chip, sometimes this leads to
pins going into D3 and right channel being muted. If the audio driver
finishes initialization before the graphic driver does, this situation
becomes permanent.
This is a workaround that checks for this situation and corrects it on
playback prepare. It has been verified working on at least one machine.
BugLink: https://bugs.launchpad.net/bugs/1167270
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When setting up the aamix output paths, use the primary DAC instead of
the individual DAC for each output as default. Otherwise multiple
DACs will be turned on for a single aamix widget, which results in
doubly or more volumes, because the duplicated signals will be sent
through all these DACs for a single stream.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When we have a loopback mixer control, this should manage the state
whether the output paths include the aamix or not. But the current
code blindly initializes the output paths with aamix = true, thus the
aamix is enabled unless the loopback mixer control is changed.
Also, update_aamix_paths() called by the loopback mixer control put
callback invokes snd_hda_activate_path() with aamix = true even for
disabling the mixing. This leaves the aamix path even though the
loopback control is turned off.
This patch fixes these issues:
- Introduced aamix_default() helper to indicate whether with_aamix is
true or false as default
- Fix the argument in update_aamix_paths() for disabling loopback
Reported-by: Lydia Wang <LydiaWang@viatech.com.cn>
Cc: <stable@vger.kernel.org> [v3.9+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For capture, the delay through the codec contributes to the time stamp
of the sample recorded at the A to D. Rename the codec time stamp
function appropriately.
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A bunch of changes here, the most interesting one subsystem wise being
Morimoto-san's work to create snd_soc_component which doesn't do much
for now but will be pretty important going forwards:
- Add a new component object type which will form the basis of moving
to a more generic handling of SoC and off-SoC components, contributed
by Kuninori Morimoto.
- A fairly large set of cleanups for the dmaengine integration from
Lars-Peter Clausen, starting to move towards being able to have a
generic driver based on the library.
- Performance optimisations to DAPM from Ryo Tsutsui.
- Support for mixer control sharing in DAPM from Stephen Warren.
- Multiplatform ARM cleanups from Arnd Bergmann.
- New CODEC drivers for AK5385 and TAS5086 from Daniel Mack.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=lx37
-----END PGP SIGNATURE-----
Merge tag 'asoc-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v3.10
A bunch of changes here, the most interesting one subsystem wise being
Morimoto-san's work to create snd_soc_component which doesn't do much
for now but will be pretty important going forwards:
- Add a new component object type which will form the basis of moving
to a more generic handling of SoC and off-SoC components, contributed
by Kuninori Morimoto.
- A fairly large set of cleanups for the dmaengine integration from
Lars-Peter Clausen, starting to move towards being able to have a
generic driver based on the library.
- Performance optimisations to DAPM from Ryo Tsutsui.
- Support for mixer control sharing in DAPM from Stephen Warren.
- Multiplatform ARM cleanups from Arnd Bergmann.
- New CODEC drivers for AK5385 and TAS5086 from Daniel Mack.
With this patch, a TRRS headset mic cannot be successfully detected
on the Asus X101CH, and we can also distinguish between headphone
and headset automatically.
Buglink: https://bugs.launchpad.net/bugs/1169138
Co-authored-by: Kailang <kailang@realtek.com>
Tested-by: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On some machines, there is a headset jack that can support both
headphone, headsets (of both CTIA and OMTP type) and mic-in.
On other machines, the headset jack supports headphone, headsets
(both CTIA and OMTP), but not mic-in.
This patch implements that functionality as different capture sources.
Buglink: https://bugs.launchpad.net/bugs/1169143
Tested-by: David Chen <david.chen@canonical.com>
Co-authored-by: Kailang <kailang@realtek.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that we have a flag for headphone mics, we can use that flag
in the jack creation instead of creating the jack manually.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
