Commit Graph

505605 Commits

Author SHA1 Message Date
Daniel Thompson
ab08e464a2 kdb: Fix a prompt management bug when using | grep
Currently when the "| grep" feature is used to filter the output of a
command then the prompt is not displayed for the subsequent command.
Likewise any characters typed by the user are also not echoed to the
display. This rather disconcerting problem eventually corrects itself
when the user presses Enter and the kdb_grepping_flag is cleared as
kdb_parse() tries to make sense of whatever they typed.

This patch resolves the problem by moving the clearing of this flag
from the middle of command processing to the beginning.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2015-02-19 12:39:03 -06:00
Daniel Thompson
5454388113 kdb: Remove stack dump when entering kgdb due to NMI
Issuing a stack dump feels ergonomically wrong when entering due to NMI.

Entering due to NMI is normally a reaction to a user request, either the
NMI button on a server or a "magic knock" on a UART. Therefore the
backtrace behaviour on entry due to NMI should be like SysRq-g (no stack
dump) rather than like oops.

Note also that the stack dump does not offer any information that
cannot be trivial retrieved using the 'bt' command.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2015-02-19 12:39:02 -06:00
Daniel Thompson
f7d4ca8bbf kdb: Avoid printing KERN_ levels to consoles
Currently when kdb traps printk messages then the raw log level prefix
(consisting of '\001' followed by a numeral) does not get stripped off
before the message is issued to the various I/O handlers supported by
kdb. This causes annoying visual noise as well as causing problems
grepping for ^. It is also a change of behaviour compared to normal usage
of printk() usage. For example <SysRq>-h ends up with different output to
that of kdb's "sr h".

This patch addresses the problem by stripping log levels from messages
before they are issued to the I/O handlers. printk() which can also
act as an i/o handler in some cases is special cased; if the caller
provided a log level then the prefix will be preserved when sent to
printk().

The addition of non-printable characters to the output of kdb commands is a
regression, albeit and extremely elderly one, introduced by commit
04d2c8c83d ("printk: convert the format for KERN_<LEVEL> to a 2 byte
pattern"). Note also that this patch does *not* restore the original
behaviour from v3.5. Instead it makes printk() from within a kdb command
display the message without any prefix (i.e. like printk() normally does).

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Joe Perches <joe@perches.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2015-02-19 12:39:02 -06:00
Jason Wessel
df0036d117 kdb: Fix off by one error in kdb_cpu()
There was a follow on replacement patch against the prior
"kgdb: Timeout if secondary CPUs ignore the roundup".

See: https://lkml.org/lkml/2015/1/7/442

This patch is the delta vs the patch that was committed upstream:
  * Fix an off-by-one error in kdb_cpu().
  * Replace NR_CPUS with CONFIG_NR_CPUS to tell checkpatch that we
    really want a static limit.
  * Removed the "KGDB: " prefix from the pr_crit() in debug_core.c
    (kgdb-next contains a patch which introduced pr_fmt() to this file
    to the tag will now be applied automatically).

Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2015-02-19 12:39:02 -06:00
Jay Lan
1467559232 kdb: fix incorrect counts in KDB summary command output
The output of KDB 'summary' command should report MemTotal, MemFree
and Buffers output in kB. Current codes report in unit of pages.

A define of K(x) as
is defined in the code, but not used.

This patch would apply the define to convert the values to kB.
Please include me on Cc on replies. I do not subscribe to linux-kernel.

Signed-off-by: Jay Lan <jlan@sgi.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2015-02-19 12:39:02 -06:00
Linus Torvalds
b11a278397 Merge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kconfig updates from Michal Marek:
 "Yann E Morin was supposed to take over kconfig maintainership, but
  this hasn't happened.  So I'm sending a few kconfig patches that I
  collected:

   - Fix for missing va_end in kconfig
   - merge_config.sh displays used if given too few arguments
   - s/boolean/bool/ in Kconfig files for consistency, with the plan to
     only support bool in the future"

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kconfig: use va_end to match corresponding va_start
  merge_config.sh: Display usage if given too few arguments
  kconfig: use bool instead of boolean for type definition attributes
2015-02-19 10:36:45 -08:00
Linus Torvalds
7734334337 Merge branch 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull misc kbuild changes from Michal Marek:
 "Just a few non-critical kbuild changes:

   - builddeb adds the actual distribution name in the changelog
   - documentation fixes"

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: trivial - fix the help doc of CONFIG_CC_OPTIMIZE_FOR_SIZE
  kbuild: Update documentation of clean-files and clean-dirs
  builddeb: Try to determine distribution
  builddeb: Update year and git repository URL in debian/copyright
2015-02-19 10:31:37 -08:00
Sage Weil
0f5417cea6 MAINTAINERS: update Ceph and RBD maintainers
- add Ilya, drop Yehuda as an RBD maintainer
- add Zheng as a Ceph maintainer
- update Yehuda and Sage's emails

Signed-off-by: Sage Weil <sage@redhat.com>
2015-02-19 10:11:20 -08:00
Linus Torvalds
27a22ee4c7 Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild updates from Michal Marek:

 - several cleanups in kbuild

 - serialize multiple *config targets so that 'make defconfig kvmconfig'
   works

 - The cc-ifversion macro got support for an else-branch

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild,gcov: simplify kernel/gcov/Makefile more
  kbuild: allow cc-ifversion to have the argument for false condition
  kbuild,gcov: simplify kernel/gcov/Makefile
  kbuild,gcov: remove unnecessary workaround
  kbuild: do not add $(call ...) to invoke cc-version or cc-fullversion
  kbuild: fix cc-ifversion macro
  kbuild: drop $(version_h) from MRPROPER_FILES
  kbuild: use mixed-targets when two or more config targets are given
  kbuild: remove redundant line from bounds.h/asm-offsets.h
  kbuild: merge bounds.h and asm-offsets.h rules
  kbuild: Drop support for clean-rule
2015-02-19 10:07:08 -08:00
Martin Schwidefsky
61b0b01686 s390/spinlock: disabled compare-and-delay by default
Until we have hard performance data about the effects of CAD in the
spinlock loop disable the instruction by default.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-02-19 18:05:38 +01:00
Wolfram Sang
b4ad0510f5 i2c: designware-baytrail: another fixup for proper Kconfig dependencies
IOSF_MBI is tristate. Baytrail driver isn't.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-02-19 17:02:59 +01:00
Baruch Siach
8421d4fe8e i2c: fix reference to functionality constants definition
Since commit 607ca46e97 ('UAPI: (Scripted) Disintegrate include/linux') the
list of functionality constants moved to include/uapi/linux/i2c.h. Update the
reference accordingly.

Fixes: 607ca46e97 ('UAPI: (Scripted) Disintegrate include/linux')
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-02-19 16:57:48 +01:00
Ralf Baechle
661af35e5f Merge branch 'mipsr6-for-3.20' of git://git.linux-mips.org/pub/scm/mchandras/linux into mips-for-linux-next 2015-02-19 16:00:34 +01:00
James Hogan
ca5d25642e MIPS: Export MSA functions used by lose_fpu(1) for KVM
Export the _save_msa asm function used by the lose_fpu(1) macro to GPL
modules so that KVM can make use of it when it is built as a module.

This fixes the following build error when CONFIG_KVM=m and
CONFIG_CPU_HAS_MSA=y due to commit f798217dfd ("KVM: MIPS: Don't leak
FPU/DSP to guest"):

ERROR: "_save_msa" [arch/mips/kvm/kvm.ko] undefined!

Fixes: f798217dfd (KVM: MIPS: Don't leak FPU/DSP to guest)
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.15+
Patchwork: https://patchwork.linux-mips.org/patch/9261/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-19 15:59:44 +01:00
James Hogan
3ce465e04b MIPS: Export FP functions used by lose_fpu(1) for KVM
Export the _save_fp asm function used by the lose_fpu(1) macro to GPL
modules so that KVM can make use of it when it is built as a module.

This fixes the following build error when CONFIG_KVM=m due to commit
f798217dfd ("KVM: MIPS: Don't leak FPU/DSP to guest"):

ERROR: "_save_fp" [arch/mips/kvm/kvm.ko] undefined!

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Fixes: f798217dfd (KVM: MIPS: Don't leak FPU/DSP to guest)
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.10+
Patchwork: https://patchwork.linux-mips.org/patch/9260/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-19 15:58:51 +01:00
Kevin Cernekee
0e16d1e340 MIPS: BCM3384: Fix outdated use of mips_cpu_intc_init()
This function was renamed to mips_cpu_irq_of_init(), so fix it to avoid
a compile error.

Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: f.fainelli@gmail.com
Cc: jaedon.shin@gmail.com
Cc: abrestic@chromium.org
Cc: tglx@linutronix.de
Cc: jason@lakedaemon.net
Cc: jogo@openwrt.org
Cc: arnd@arndb.de
Cc: computersforpeace@gmail.com
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8834/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-19 13:47:55 +01:00
Petr Malat
8cb48fe169 MIPS: Provide correct siginfo_t.si_stime
Provide correct siginfo_t.si_stime on MIPS64

Bug description:
MIPS version of copy_siginfo() is not aware of alignment on platforms with
64-bit long integers, which leads to an incorrect si_stime passed to signal
handlers, because the last element (si_stime) of _sifields._sigchld is not
copied. If _MIPS_SZLONG is 64, then the _sifields starts at the offset of
4 * sizeof(int).

Patch description:
Use the generic copy_siginfo, which doesn't have this problem.

Signed-off-by: Petr Malat <oss@malat.biz>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8671/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-19 13:47:46 +01:00
Markos Chandras
32098ec7bc MIPS: Makefile: Move the ASEs checks after setting the core's CFLAGS
We need to check the ASEs support against the core's CFLAGS instead
of depending to the default -march option from the toolchain.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9180/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-19 13:47:32 +01:00
Ralf Baechle
a8140f36af MIPS: Makefile: Pass -march option on Loongson3A cores
The loongson 3A cores do not select a suitable -march option so the build
system uses the default one from the toolchain. This may or may not be
suitable for a loongson 3A build. In order to avoid that, we explicitly set
a suitable -march option for that core.  Furthermore, some very old
compilers don't support -march= at all and there is the possibility of
toolchain combinations such as GCC 4.9 and binutils 2.24 for which
-march=loongson3a will result in MIPS64 R2 code being generated but then
rejected by GAS.  So treat the Longsoon 3A as an R2 CPU.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-19 13:47:20 +01:00
Ingo Molnar
1fbe23e0de * Two fixes hardening microcode data handling. (Quentin Casasnovas)
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU5cyVAAoJEBLB8Bhh3lVKJWEP/1eK+XyiVdxV7FRuPmmgjGUC
 mD6MypFCwc942orTdltm9vlRFTU6OE1AkfEVX3NKawy+lzt/mE+TbWzwx+mr26un
 pqyKgSGGKqACDBADgUiVxubXffhAx9Ke5obScZoFA/Yp+l7os8wkwr6AMjwU+XgU
 FMGKWra0yeZsfCSkQgQ+q+RjQe2TOjh3YYVcwpPRaU6jkJ3CR+MNQ2tVmJnEVMAq
 Q3xEce8mMN+xpuyTlCyvpSIid8M9klAeXb5kjqfffJGSBmtVJ+nn3mDV1a0ejeYQ
 aA6X6SBwpIBPPjhwJrsgUcGC0GeF4X0TKjg1F6ZEW0lN9/mipiM+t3OEgxcBH0G7
 SOAUtQTRDasj0bJd5qKOhAWWmFoXjSc61XiMYUreOWDPoaje76oql+iN1auZsRSh
 RS6KCwYgdqQYscN05L/l4iHgJXeGUTm45BJ6rJb1wEJ9OldO5yK4O42Tn0IZyQ4g
 w10poQY4jkjPnHVUWvk5IQpu7AcBiZtov201a89QpRyPGFoGgOOu7n5y0nDLxuvK
 m3L8LrEve8xO8xdqyidQKE3KGLnDcuuTx9XscbEGtoNWQ8oGIYuYW9DvKzCK/kmU
 u24tx65tygcQ6NJoUW/S3mIwnlyM1egqziXjpzmfR2TvGraqNCkIkocYyf1etVjh
 c0Mem02eJTvarxEpvHAa
 =qoLG
 -----END PGP SIGNATURE-----

Merge tag 'microcode_fixes_for-3.21' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp into x86/urgent

Pull microcode fixes from Borislav Petkov:

  - Two fixes hardening microcode data handling. (Quentin Casasnovas)

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-19 13:32:42 +01:00
Quentin Casasnovas
35a9ff4eec x86/microcode/intel: Handle truncated microcode images more robustly
We do not check the input data bounds containing the microcode before
copying a struct microcode_intel_header from it. A specially crafted
microcode could cause the kernel to read invalid memory and lead to a
denial-of-service.

Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1422964824-22056-3-git-send-email-quentin.casasnovas@oracle.com
[ Made error message differ from the next one and flipped comparison. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
2015-02-19 12:42:23 +01:00
Quentin Casasnovas
f84598bd7c x86/microcode/intel: Guard against stack overflow in the loader
mc_saved_tmp is a static array allocated on the stack, we need to make
sure mc_saved_count stays within its bounds, otherwise we're overflowing
the stack in _save_mc(). A specially crafted microcode header could lead
to a kernel crash or potentially kernel execution.

Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1422964824-22056-1-git-send-email-quentin.casasnovas@oracle.com
Signed-off-by: Borislav Petkov <bp@suse.de>
2015-02-19 12:41:37 +01:00
Ingo Molnar
a267b0a349 Merge branch 'tip-x86-kaslr' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp into x86/urgent
Pull ASLR and kASLR fixes from Borislav Petkov:

  - Add a global flag announcing KASLR state so that relevant code can do
    informed decisions based on its setting. (Jiri Kosina)

  - Fix a stack randomization entropy decrease bug. (Hector Marco-Gisbert)

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-19 12:31:34 +01:00
Ilya Dryomov
b28ec2f37e libceph: kfree() in put_osd() shouldn't depend on authorizer
a255651d4c ("ceph: ensure auth ops are defined before use") made
kfree() in put_osd() conditional on the authorizer.  A mechanical
mistake most likely - fix it.

Cc: Alex Elder <elder@linaro.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2015-02-19 14:27:51 +03:00
Ilya Dryomov
7eb71e0351 libceph: fix double __remove_osd() problem
It turns out it's possible to get __remove_osd() called twice on the
same OSD.  That doesn't sit well with rb_erase() - depending on the
shape of the tree we can get a NULL dereference, a soft lockup or
a random crash at some point in the future as we end up touching freed
memory.  One scenario that I was able to reproduce is as follows:

            <osd3 is idle, on the osd lru list>
<con reset - osd3>
con_fault_finish()
  osd_reset()
                              <osdmap - osd3 down>
                              ceph_osdc_handle_map()
                                <takes map_sem>
                                kick_requests()
                                  <takes request_mutex>
                                  reset_changed_osds()
                                    __reset_osd()
                                      __remove_osd()
                                  <releases request_mutex>
                                <releases map_sem>
    <takes map_sem>
    <takes request_mutex>
    __kick_osd_requests()
      __reset_osd()
        __remove_osd() <-- !!!

A case can be made that osd refcounting is imperfect and reworking it
would be a proper resolution, but for now Sage and I decided to fix
this by adding a safe guard around __remove_osd().

Fixes: http://tracker.ceph.com/issues/8087

Cc: Sage Weil <sage@redhat.com>
Cc: stable@vger.kernel.org # 3.9+: 7c6e6fc53e: libceph: assert both regular and lingering lists in __remove_osd()
Cc: stable@vger.kernel.org # 3.9+: cc9f1f518c: libceph: change from BUG to WARN for __remove_osd() asserts
Cc: stable@vger.kernel.org # 3.9+
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2015-02-19 14:27:50 +03:00
Christoph Hellwig
7ad18afad0 rbd: convert to blk-mq
This converts the rbd driver to use the blk-mq infrastructure.  Except
for switching to a per-request work item this is almost mechanical.

This was tested by Alexandre DERUMIER in November, and found to give
him 120000 iops, although the only comparism available was an old
3.10 kernel which gave 80000iops.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <elder@linaro.org>
[idryomov@gmail.com: context, blk_mq_init_queue() EH]
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2015-02-19 14:27:42 +03:00
Hector Marco-Gisbert
4e7c22d447 x86, mm/ASLR: Fix stack randomization on 64-bit systems
The issue is that the stack for processes is not properly randomized on
64 bit architectures due to an integer overflow.

The affected function is randomize_stack_top() in file
"fs/binfmt_elf.c":

  static unsigned long randomize_stack_top(unsigned long stack_top)
  {
           unsigned int random_variable = 0;

           if ((current->flags & PF_RANDOMIZE) &&
                   !(current->personality & ADDR_NO_RANDOMIZE)) {
                   random_variable = get_random_int() & STACK_RND_MASK;
                   random_variable <<= PAGE_SHIFT;
           }
           return PAGE_ALIGN(stack_top) + random_variable;
           return PAGE_ALIGN(stack_top) - random_variable;
  }

Note that, it declares the "random_variable" variable as "unsigned int".
Since the result of the shifting operation between STACK_RND_MASK (which
is 0x3fffff on x86_64, 22 bits) and PAGE_SHIFT (which is 12 on x86_64):

	  random_variable <<= PAGE_SHIFT;

then the two leftmost bits are dropped when storing the result in the
"random_variable". This variable shall be at least 34 bits long to hold
the (22+12) result.

These two dropped bits have an impact on the entropy of process stack.
Concretely, the total stack entropy is reduced by four: from 2^28 to
2^30 (One fourth of expected entropy).

This patch restores back the entropy by correcting the types involved
in the operations in the functions randomize_stack_top() and
stack_maxrandom_size().

The successful fix can be tested with:

  $ for i in `seq 1 10`; do cat /proc/self/maps | grep stack; done
  7ffeda566000-7ffeda587000 rw-p 00000000 00:00 0                          [stack]
  7fff5a332000-7fff5a353000 rw-p 00000000 00:00 0                          [stack]
  7ffcdb7a1000-7ffcdb7c2000 rw-p 00000000 00:00 0                          [stack]
  7ffd5e2c4000-7ffd5e2e5000 rw-p 00000000 00:00 0                          [stack]
  ...

Once corrected, the leading bytes should be between 7ffc and 7fff,
rather than always being 7fff.

Signed-off-by: Hector Marco-Gisbert <hecmargi@upv.es>
Signed-off-by: Ismael Ripoll <iripoll@upv.es>
[ Rebased, fixed 80 char bugs, cleaned up commit message, added test example and CVE ]
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Fixes: CVE-2015-1593
Link: http://lkml.kernel.org/r/20150214173350.GA18393@www.outflux.net
Signed-off-by: Borislav Petkov <bp@suse.de>
2015-02-19 12:21:36 +01:00
Ingo Molnar
ee408b4207 Merge branch 'tip-x86-mm' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp into x86/urgent
Pull boot printout fix from Borislav Petkov.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-19 11:59:18 +01:00
Dave Hansen
f15e05186c x86/mm/init: Fix incorrect page size in init_memory_mapping() printks
With 32-bit non-PAE kernels, we have 2 page sizes available
(at most): 4k and 4M.

Enabling PAE replaces that 4M size with a 2M one (which 64-bit
systems use too).

But, when booting a 32-bit non-PAE kernel, in one of our
early-boot printouts, we say:

  init_memory_mapping: [mem 0x00000000-0x000fffff]
   [mem 0x00000000-0x000fffff] page 4k
  init_memory_mapping: [mem 0x37000000-0x373fffff]
   [mem 0x37000000-0x373fffff] page 2M
  init_memory_mapping: [mem 0x00100000-0x36ffffff]
   [mem 0x00100000-0x003fffff] page 4k
   [mem 0x00400000-0x36ffffff] page 2M
  init_memory_mapping: [mem 0x37400000-0x377fdfff]
   [mem 0x37400000-0x377fdfff] page 4k

Which is obviously wrong.  There is no 2M page available.  This
is probably because of a badly-named variable: in the map_range
code: PG_LEVEL_2M.

Instead of renaming all the PG_LEVEL_2M's.  This patch just
fixes the printout:

  init_memory_mapping: [mem 0x00000000-0x000fffff]
   [mem 0x00000000-0x000fffff] page 4k
  init_memory_mapping: [mem 0x37000000-0x373fffff]
   [mem 0x37000000-0x373fffff] page 4M
  init_memory_mapping: [mem 0x00100000-0x36ffffff]
   [mem 0x00100000-0x003fffff] page 4k
   [mem 0x00400000-0x36ffffff] page 4M
  init_memory_mapping: [mem 0x37400000-0x377fdfff]
   [mem 0x37400000-0x377fdfff] page 4k
  BRK [0x03206000, 0x03206fff] PGTABLE

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/20150210212030.665EC267@viggo.jf.intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
2015-02-19 11:45:27 +01:00
Jiri Kosina
f47233c2d3 x86/mm/ASLR: Propagate base load address calculation
Commit:

  e2b32e6785 ("x86, kaslr: randomize module base load address")

makes the base address for module to be unconditionally randomized in
case when CONFIG_RANDOMIZE_BASE is defined and "nokaslr" option isn't
present on the commandline.

This is not consistent with how choose_kernel_location() decides whether
it will randomize kernel load base.

Namely, CONFIG_HIBERNATION disables kASLR (unless "kaslr" option is
explicitly specified on kernel commandline), which makes the state space
larger than what module loader is looking at. IOW CONFIG_HIBERNATION &&
CONFIG_RANDOMIZE_BASE is a valid config option, kASLR wouldn't be applied
by default in that case, but module loader is not aware of that.

Instead of fixing the logic in module.c, this patch takes more generic
aproach. It introduces a new bootparam setup data_type SETUP_KASLR and
uses that to pass the information whether kaslr has been applied during
kernel decompression, and sets a global 'kaslr_enabled' variable
accordingly, so that any kernel code (module loading, livepatching, ...)
can make decisions based on its value.

x86 module loader is converted to make use of this flag.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Link: https://lkml.kernel.org/r/alpine.LNX.2.00.1502101411280.10719@pobox.suse.cz
[ Always dump correct kaslr status when panicking ]
Signed-off-by: Borislav Petkov <bp@suse.de>
2015-02-19 11:38:54 +01:00
Yan, Zheng
4d41cef279 ceph: return error for traceless reply race
When we receives traceless reply for request that created new inode,
we re-send a lookup request to MDS get information of the newly created
inode. (VFS expects FS' callback return an inode in create case)
This breaks one request into two requests. Other client may modify or
move to the new inode in the middle.

When the race happens, ceph_handle_notrace_create() unconditionally
links the dentry for 'create' operation to the inode returned by lookup.
This may confuse VFS when the inode is a directory (VFS does not allow
multiple linkages for directory inode).

This patch makes ceph_handle_notrace_create() when it detect a race.
This event should be rare and it happens only when we talk to old MDS.
Recent MDS does not send traceless reply for request that creates new
inode.

Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-02-19 13:31:40 +03:00
Yan, Zheng
5cba372c0f ceph: fix dentry leaks
Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-02-19 13:31:40 +03:00
Yan, Zheng
3de22be677 ceph: re-send requests when MDS enters reconnecting stage
So that MDS can check if any request is already completed and process
completed requests in clientreplay stage. When completed requests are
processed in clientreplay stage, MDS can avoid sending traceless
replies.

Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-02-19 13:31:40 +03:00
Ilya Dryomov
2a0b61cefc ceph: show nocephx_require_signatures and notcp_nodelay options
Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
2015-02-19 13:31:40 +03:00
Chaitanya Huilgol
ba988f87f5 libceph: tcp_nodelay support
TCP_NODELAY socket option set on connection sockets,
disables Nagle’s algorithm and improves latency characteristics.
tcp_nodelay(default)/notcp_nodelay option flags provided to
enable/disable setting the socket option.

Signed-off-by: Chaitanya Huilgol <chaitanya.huilgol@sandisk.com>
[idryomov@redhat.com: NO_TCP_NODELAY -> TCP_NODELAY, minor adjustments]
Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
2015-02-19 13:31:40 +03:00
Ilya Dryomov
cf32bd9c86 rbd: do not treat standalone as flatten
If the clone is resized down to 0, it becomes standalone.  If such
resize is carried over while an image is mapped we would detect this
and call rbd_dev_parent_put() which means "let go of all parent state,
including the spec(s) of parent images(s)".  This leads to a mismatch
between "rbd info" and sysfs parent fields, so a fix is in order.

    # rbd create --image-format 2 --size 1 foo
    # rbd snap create foo@snap
    # rbd snap protect foo@snap
    # rbd clone foo@snap bar
    # DEV=$(rbd map bar)
    # rbd resize --allow-shrink --size 0 bar
    # rbd resize --size 1 bar
    # rbd info bar | grep parent
            parent: rbd/foo@snap

Before:

    # cat /sys/bus/rbd/devices/0/parent
    (no parent image)

After:

    # cat /sys/bus/rbd/devices/0/parent
    pool_id 0
    pool_name rbd
    image_id 10056b8b4567
    image_name foo
    snap_id 2
    snap_name snap
    overlap 0

Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
Reviewed-by: Josh Durgin <jdurgin@redhat.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2015-02-19 13:31:39 +03:00
Yan, Zheng
bf91c31508 ceph: fix atomic_open snapdir
ceph_handle_snapdir() checks ceph_mdsc_do_request()'s return value
and creates snapdir inode if it's -ENOENT

Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-02-19 13:31:39 +03:00
Yan, Zheng
2f92b3d0a9 ceph: properly mark empty directory as complete
ceph_add_cap() calls __check_cap_issue(), which clears directory
inode' complete flag. so we should set the complete flag for empty
directory should be set after calling ceph_add_cap().

Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-02-19 13:31:39 +03:00
Yan, Zheng
a6a5ce4f0d client: include kernel version in client metadata
Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-02-19 13:31:39 +03:00
Yan, Zheng
38c48b5f0a ceph: provide seperate {inode,file}_operations for snapdir
remove all unsupported operations from {inode,file}_operations.

Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-02-19 13:31:39 +03:00
Yan, Zheng
1f041a89b4 ceph: fix request time stamp encoding
struct timespec uses 'long' to present second and nanosecond. 'long'
is 64 bits on 64bits machine. ceph MDS expects time stamp to be
encoded as struct ceph_timespec, which uses 'u32' to present second
and nanosecond.

Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-02-19 13:31:39 +03:00
Yan, Zheng
fcc02d2a03 ceph: fix reading inline data when i_size > PAGE_SIZE
when inode has inline data but its size > PAGE_SIZE (it was truncated
to larger size), previous direct read code return -EIO. This patch adds
code to return zeros for data whose offset > PAGE_SIZE.

Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-02-19 13:31:39 +03:00
Yan, Zheng
86d8f67b26 ceph: avoid block operation when !TASK_RUNNING (ceph_mdsc_close_sessions)
use an atomic variable to track number of sessions, this can avoid block
operation inside wait loops.

Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-02-19 13:31:38 +03:00
Yan, Zheng
c4d4a582c5 ceph: avoid block operation when !TASK_RUNNING (ceph_get_caps)
we should not do block operation in wait_event_interruptible()'s condition
check function, but reading inline data can block. so move the read inline
data code to ceph_get_caps()

Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-02-19 13:31:38 +03:00
Yan, Zheng
d3383a8e37 ceph: avoid block operation when !TASK_RUNNING (ceph_mdsc_sync)
check_cap_flush() calls mutex_lock(), which may block. So we can't
use it as condition check function for wait_event();

Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-02-19 13:31:38 +03:00
Ilya Dryomov
73e39e4dba rbd: fix error paths in rbd_dev_refresh()
header_rwsem should be released on errors.  Also remove useless
rbd_dev->mapping.size != rbd_dev->header.image_size test.

Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
2015-02-19 13:31:38 +03:00
Yan, Zheng
982d6011bc ceph: improve reference tracking for snaprealm
When snaprealm is created, its initial reference count is zero.
But in some rare cases, the newly created snaprealm is not referenced
by anyone. This causes snaprealm with zero reference count not freed.

The fix is set reference count of newly snaprealm to 1. The reference
is return the function who requests to create the snaprealm. When the
function finishes its job, it releases the reference.

Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-02-19 13:31:38 +03:00
Yan, Zheng
1487a688d8 ceph: properly zero data pages for file holes.
A bug is found in striped_read() of fs/ceph/file.c. striped_read() calls
ceph_zero_pape_vector_range().  The first argument, page_align + read + ret,
passed to ceph_zero_pape_vector_range() is wrong.

When a file has holes, this wrong parameter may cause memory corruption
either in kernal space or user space. Kernel space memory may be corrupted in
the case of non direct IO; user space memory may be corrupted in the case of
direct IO. In the latter case, the application doing direct IO may crash due
to memory corruption, as we have experienced.

The correct value should be initial_align + read + ret, where intial_align =
o_direct ? buf_align : io_align.  Compared with page_align, the current page
offest, initial_align is the initial page offest, which should be used to
calculate the page and offset in ceph_zero_pape_vector_range().

Reported-by: caifeng zhu <zhucaifeng@unissoft-nj.com>
Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-02-19 13:31:38 +03:00
Rickard Strandqvist
671762f807 ceph: acl: Remove unused function
Remove the function ceph_get_cached_acl() that is not used anywhere.

This was partially found by using a static code analysis program called cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
2015-02-19 13:31:38 +03:00
Rickard Strandqvist
3a25cf43e0 rbd: nuke copy_token()
It's been largely superseded by dup_token() and unused for over
2 years, identified by cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
[idryomov@redhat.com: changelog]
Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
2015-02-19 13:31:38 +03:00