Add support for the MIPS Boston development board to generic kernels,
which essentially amounts to:
- Adding the device tree source for the MIPS Boston board.
- Adding a Kconfig fragment which enables the appropriate drivers for
the MIPS Boston board.
With these changes in place generic kernels will support the board by
default, and kernels with only the drivers needed for Boston enabled can
be configured by setting BOARDS=boston during configuration. For
example:
$ make ARCH=mips 64r6el_defconfig BOARDS=boston
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16485/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Enable the Octeon MMC driver in the defconfig.
Signed-off-by: Steven J. Hill <Steven.Hill@cavium.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The generic_defconfig is used for platforms like SEAD3 which do not
usually have fixed storage available, therefore NFS is the preferred
location of the RFS.
When the upstream kernel defconfig is built & tested on platforms such
as SEAD3 this leads to essentially false failures when the RFS fails to
mount.
There is little harm in having this feature enabled by default, so
enable it in the defconfig. Kernel autoconfiguration & DHCP must also be
selected to allow RFS on NFS.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15853/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Miscellaneous:
- Add IRQ stacks
- Add cacheinfo support
- Add "uzImage.bin" zboot target
- Unify performance counter definitions
- Export various (mainly assembly) symbols alongside their
definitions
- Audit and remove unnecessary uses of module.h
kexec & kdump:
- Lots of improvements and fixes
- Add correct copy_regs implementations
- Add debug logging of new kernel information
Security:
- Use Makefile.postlink to insert relocations into vmlinux
- Provide plat_post_relocation hook (used for Octeon KASLR)
- Add support for tuning mmap randomisation
- Relocate DTB
microMIPS:
- A load of unwind fixes
- Add some missing .insn to fix link errors
MIPSr6:
- Fix MULTU/MADDU/MSUBU sign extension in r2 emulation
- Remove r2_emul_return and use ERETNC unconditionally on MIPSr6
- Allow pre-r6 emulation on SMP MIPSr6 kernels
Cache management:
- Treat physically indexed dcache as non-aliasing
- Add return errors to protected cache ops for KVM
- CM3: Ensure L1 & L2 cache ECC checking matches
- CM3: Indicate inclusive caches
- I6400: Treat dcache as physically indexed
Memory management:
- Ensure bootmem doesn't corrupt reserved memory
- Export some TLB exception generation functions for KVM
OF
- NULL check initial_boot_params before use in of_scan_flat_dt()
- Fix unaligned access in of_alias_scan()
SMP:
- CPS: Don't BUG if a CPU fails to start
Other fixes
- Fix longstanding 64-bit IP checksum carry bug
- Fix KERN_CONT fallout in cpu-bugs64.c and sync-r4k.c
- Update defconfigs for NF_CT_PROTO_DCCP, DPLITE,
CPU_FREQ_STAT,SCSI_DH changes
- Disable certain builtin compiler options, stack-check (whole
kernel), asynchronous-unwind-tables (VDSO).
- A bunch of build fixes from kernelci.org testing
- Various other minor cleanups & corrections
BMIPS:
- Migrate interrupts during bmips_cpu_disable
- BCM47xx: Add Luxul devices
- BCM47xx: Fix Asus WL-500W button inversion
- BCM7xxx: Add SPI device nodes
Generic (multiplatform):
- Add kexec DTB passing
- Fix big endian
- Add cpp_its_S in ksym_dep_filter to silence build warning
IP22:
- Reformat inline assembler code to modern standards
- Fix binutils 2.25 build error
IP27:
- Fix duplicate CAC_BASE definition build error
- Disable qlge driver to workaround broken compiler
Lantiq:
- Refresh defconfig and activate more drivers
- Lock DMA register access
- Fix cascading IRQ setup
- Fix build of VPE loader
- xway: Fix ethernet packet header corruption over reboot
Loongson1
- Add watchdog support
- 1B: Reduce DEFAULT_MEMSIZE to 64MB
- 1B: Change OSC clock name to match rest of kernel
- 1C: Remove ARCH_WANT_OPTIONAL_GPIOLIB
Octeon:
- Add KASLR support
- Support Octeon III USB controller
- Fix large copy_from_user corner case
- Enable devtmpfs in defconfig
Netlogic:
- Fix non-default XLR build error due to netlogic,xlp-pic code
- Fix assembler warning from smpboot.S
pic32mzda:
- Fix linker error when early printk is disabled
Pistachio:
- Add base device tree
- Add Ci40 "Marduk" device tree
Ralink:
- Support raw appended DTB
- Add missing I2C & I2S clocks
- Add missing pinmux and fix pinmux function name typo
- Add missing clk_round_rate()
- Clean up prom_init()
- MT7621: Set SoC type
- MT7621: Support highmem
TXx9:
- Modernize printing of kernel messages and resolve KERN_CONT fallout
- 7segled: use permission-specific DEVICE_ATTR variants
XilFPGA:
- Add IRQ controller and UART IRQ
- Add AXI I2C and emaclite to DT & defconfig
-----BEGIN PGP SIGNATURE-----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=maZx
-----END PGP SIGNATURE-----
Merge tag 'mips_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips
Pull MIPS updates from James Hogan:
"Here's the main MIPS pull request for 4.11.
It contains a few new features such as IRQ stacks, cacheinfo support,
and KASLR for Octeon CPUs, and a variety of smaller improvements and
fixes including devicetree additions, kexec cleanups, microMIPS stack
unwinding fixes, and a bunch of build fixes to clean up continuous
integration builds.
Its all been in linux-next for at least a couple of days, most of it
far longer.
Miscellaneous:
- Add IRQ stacks
- Add cacheinfo support
- Add "uzImage.bin" zboot target
- Unify performance counter definitions
- Export various (mainly assembly) symbols alongside their
definitions
- Audit and remove unnecessary uses of module.h
kexec & kdump:
- Lots of improvements and fixes
- Add correct copy_regs implementations
- Add debug logging of new kernel information
Security:
- Use Makefile.postlink to insert relocations into vmlinux
- Provide plat_post_relocation hook (used for Octeon KASLR)
- Add support for tuning mmap randomisation
- Relocate DTB
microMIPS:
- A load of unwind fixes
- Add some missing .insn to fix link errors
MIPSr6:
- Fix MULTU/MADDU/MSUBU sign extension in r2 emulation
- Remove r2_emul_return and use ERETNC unconditionally on MIPSr6
- Allow pre-r6 emulation on SMP MIPSr6 kernels
Cache management:
- Treat physically indexed dcache as non-aliasing
- Add return errors to protected cache ops for KVM
- CM3: Ensure L1 & L2 cache ECC checking matches
- CM3: Indicate inclusive caches
- I6400: Treat dcache as physically indexed
Memory management:
- Ensure bootmem doesn't corrupt reserved memory
- Export some TLB exception generation functions for KVM
OF:
- NULL check initial_boot_params before use in of_scan_flat_dt()
- Fix unaligned access in of_alias_scan()
SMP:
- CPS: Don't BUG if a CPU fails to start
Other fixes:
- Fix longstanding 64-bit IP checksum carry bug
- Fix KERN_CONT fallout in cpu-bugs64.c and sync-r4k.c
- Update defconfigs for NF_CT_PROTO_DCCP, DPLITE,
CPU_FREQ_STAT,SCSI_DH changes
- Disable certain builtin compiler options, stack-check (whole
kernel), asynchronous-unwind-tables (VDSO).
- A bunch of build fixes from kernelci.org testing
- Various other minor cleanups & corrections
BMIPS:
- Migrate interrupts during bmips_cpu_disable
- BCM47xx: Add Luxul devices
- BCM47xx: Fix Asus WL-500W button inversion
- BCM7xxx: Add SPI device nodes
Generic (multiplatform):
- Add kexec DTB passing
- Fix big endian
- Add cpp_its_S in ksym_dep_filter to silence build warning
IP22:
- Reformat inline assembler code to modern standards
- Fix binutils 2.25 build error
IP27:
- Fix duplicate CAC_BASE definition build error
- Disable qlge driver to workaround broken compiler
Lantiq:
- Refresh defconfig and activate more drivers
- Lock DMA register access
- Fix cascading IRQ setup
- Fix build of VPE loader
- xway: Fix ethernet packet header corruption over reboot
Loongson1
- Add watchdog support
- 1B: Reduce DEFAULT_MEMSIZE to 64MB
- 1B: Change OSC clock name to match rest of kernel
- 1C: Remove ARCH_WANT_OPTIONAL_GPIOLIB
Octeon:
- Add KASLR support
- Support Octeon III USB controller
- Fix large copy_from_user corner case
- Enable devtmpfs in defconfig
Netlogic:
- Fix non-default XLR build error due to netlogic,xlp-pic code
- Fix assembler warning from smpboot.S
pic32mzda:
- Fix linker error when early printk is disabled
Pistachio:
- Add base device tree
- Add Ci40 "Marduk" device tree
Ralink:
- Support raw appended DTB
- Add missing I2C & I2S clocks
- Add missing pinmux and fix pinmux function name typo
- Add missing clk_round_rate()
- Clean up prom_init()
- MT7621: Set SoC type
- MT7621: Support highmem
TXx9:
- Modernize printing of kernel messages and resolve KERN_CONT fallout
- 7segled: use permission-specific DEVICE_ATTR variants
XilFPGA:
- Add IRQ controller and UART IRQ
- Add AXI I2C and emaclite to DT & defconfig"
* tag 'mips_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (148 commits)
MIPS: VDSO: Explicitly use -fno-asynchronous-unwind-tables
MIPS: BCM47XX: Fix button inversion for Asus WL-500W
MIPS: DTS: Add img directory to Makefile
MIPS: ip27: Disable qlge driver in defconfig
MIPS: pic32mzda: Fix linker error for pic32_get_pbclk()
MIPS: Lantiq: Keep ethernet enabled during boot
MIPS: OCTEON: Fix copy_from_user fault handling for large buffers
MIPS: Fix special case in 64 bit IP checksumming.
MIPS: OCTEON: Enable DEVTMPFS
MIPS: lantiq: Set physical_memsize
MIPS: sysmips: Remove duplicated include from syscall.c
Kbuild: Add cpp_its_S in ksym_dep_filter
MIPS: Audit and remove any unnecessary uses of module.h
MIPS: Unify perf counter register definitions
MIPS: Disable stack checks on MIPS kernels
MIPS: OCTEON: Platform support for OCTEON III USB controller
MIPS: Lantiq: Fix cascaded IRQ setup
MIPS: sync-r4k: Fix KERN_CONT fallout
MIPS: IRQ Stack: Fix erroneous jal to plat_irq_dispatch
MIPS: Fix distclean with Makefile.postlink
...
One of the last remaining failures in kernelci.org is for a gcc bug:
drivers/net/ethernet/qlogic/qlge/qlge_main.c:4819:1: error: insn does not satisfy its constraints:
drivers/net/ethernet/qlogic/qlge/qlge_main.c:4819:1: internal compiler error: in extract_constrain_insn, at recog.c:2190
This is apparently broken in gcc-6 but fixed in gcc-7, and I cannot
reproduce the problem here. However, it is clear that ip27_defconfig
does not actually need this driver as the platform has only PCI-X but
not PCIe, and the qlge adapter in turn is PCIe-only.
The driver was originally enabled in 2010 along with lots of other
drivers.
Fixes: 59d302b342 ("MIPS: IP27: Make defconfig useful again.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15197/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Recent versions of udev and systemd require the kernel to be compiled
with CONFIG_DEVTMPFS in order to populate the /dev directory. Most MIPS
platforms have it enabled by default, so enable it for the Cavium Octeon
defconfig as well. This will assist with automated kernel boot testing.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: David Daney <david.daney@cavium.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15294/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Enable all applicable CPUfreq options.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Ran "make savedefconfig" to bring bmips_stb_defconfig up to date.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This doesn't have any benefit apart from saving a small amount of memory
when it is disabled. The ifdef hackery in the code makes it dirty
unnecessarily.
Clean it up by removing the Kconfig option completely. Few defconfigs
are also updated and CONFIG_CPU_FREQ_STAT_DETAILS is replaced with
CONFIG_CPU_FREQ_STAT now in them, as users wanted stats to be enabled.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since linux-4.3, SCSI_DH is a bool symbol, causing a warning in
kernelci.org:
arch/mips/configs/ip27_defconfig:136:warning: symbol value 'm' invalid for SCSI_DH
This updates the defconfig to have the feature built-in.
Fixes: 086b91d052 ("scsi_dh: integrate into the core SCSI code")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15001/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Since linux-4.8, CPU_FREQ_STAT is a bool symbol, causing a warning in
kernelci.org:
arch/mips/configs/lemote2f_defconfig:42:warning: symbol value 'm' invalid for CPU_FREQ_STAT
This updates the defconfig to have the feature built-in.
Fixes: 1aefc75b24 ("cpufreq: stats: Make the stats code non-modular")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15000/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
In linux-4.10-rc, NF_CT_PROTO_UDPLITE and NF_CT_PROTO_DCCP are bool
symbols instead of tristate, and kernelci.org reports a bunch of
warnings for this, like:
arch/mips/configs/malta_kvm_guest_defconfig:63:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
arch/mips/configs/malta_defconfig:62:warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP
arch/mips/configs/malta_defconfig:63:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
arch/mips/configs/ip22_defconfig:70:warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP
arch/mips/configs/ip22_defconfig:71:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
This changes all the MIPS defconfigs with these symbols to have them
built-in.
Fixes: 9b91c96c5d ("netfilter: conntrack: built-in support for UDPlite")
Fixes: c51d39010a ("netfilter: conntrack: built-in support for DCCP")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14999/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This activates the following functionalities:
* SMP support (used on xRX200)
* PCI support
* NAND driver
* PHY driver
* UART
* Watchdog
* USB 2.0 controller
These driver are driving different IP cores found on the supported SoCs.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14628/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Just generate a configuration based on this default configuration and
store it again. This removed some old configuration options.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14629/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Convert the MIPS SEAD-3 board support to be a generic board, supported
by generic kernels.
Because the SEAD-3 boot protocol was defined long ago and we don't want
to force a switch to the UHI protocol, SEAD-3 is added as a legacy board
which is detected by reading the REVISION register. This may technically
not be a valid memory read & future work will include attempting to
handle that gracefully. In practice since SEAD-3 is the only legacy
board supported by the generic kernel so far the read will only happen
on SEAD-3 boards, and even once Malta is converted the same REVISION
register exists there too. Other boards such as Boston, Ci20 & Ci40 will
use the UHI boot protocol & thus not run any of the legacy board detect
functions.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14354/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Introduce a "generic" platform, which aims to be board-agnostic by
making use of device trees passed by the boot protocol defined in the
MIPS UHI (Universal Hosting Interface) specification. Provision is made
for supporting boards which use a legacy boot protocol that can't be
changed, but adding support for such boards or any others is left to
followon patches.
Right now the built kernels expect to be loaded to 0x80100000, ie. in
kseg0. This is fine for the vast majority of MIPS platforms, but
nevertheless it would be good to remove this limitation in the future by
mapping the kernel via the TLB such that it can be loaded anywhere & map
itself appropriately.
Configuration is handled by dynamically generating configs using
scripts/kconfig/merge_config.sh, somewhat similar to the way powerpc
makes use of it. This allows for variations upon the configuration, eg.
differing architecture revisions or subsets of driver support for
differing boards, to be handled without having a large number of
defconfig files.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14353/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Make use of the generic syscon-reboot driver to reboot the Malta board,
reducing the amount of platform code it requires.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Stephan Linz <linz@li-pro.net>
Cc: Jacek Anaszewski <j.anaszewski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14279/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Add the DT nodes required to probe the CFI compatible parallel monitor
flash found on the Malta development board, and remove the platform
code that was previously doing it. Delete the now-empty malta-platform.c
file. Adjust the Malta defconfigs that enable MTD & the pflash/CFI
driver to enable CONFIG_MTD_PHYSMAP_OF rather than CONFIG_MTD_PHYSMAP in
order to preserve their behaviour.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14278/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Remove the custom platform code to restart when instructed to power off,
instead relying upon the generic restart-poweroff driver probed via DT
to do the same thing.
Remove also the halt implementation, which is incorrect. The generic
MIPS version will hang the system as halt should.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Jacek Anaszewski <j.anaszewski@samsung.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14057/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Probe a driver for the PLED & FLED LEDs found on the SEAD3 board using
the register-bit-led driver via device tree, rather than a custom driver
via platform code. Enable support for the register-bit-led driver & its
prerequisite syscon in sead3_defconfig.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Jacek Anaszewski <j.anaszewski@samsung.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14054/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Stop selecting SYS_HAS_EARLY_PRINTK & remove the custom support for
early output to the ns16550a UARTs, instead relying upon generic
ns16550a earlycon support. This reduces the amount of platform code
required for SEAD3 without losing any functionality.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Jacek Anaszewski <j.anaszewski@samsung.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14049/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Probe the UARTs on SEAD3 boards using device tree rather than platform
code, in order to reduce the amount of the latter. This requires that
CONFIG_SERIAL_OF_PLATFORM be enabled, so enable it in sead3_defconfig.
The SEAD3 DT shim code is extended to read bootloader environment
variables to determine the appropriate UART & mode for kernel console
output & set the stdout-path property of the chosen node accordingly.
In contrast to the old platform code, which appears to have only ever
set "console=ttyS0,38400n8r" with the code in console_config never
having an effect, this will honor the "yamontty" environment variable to
select between the 2 UARTs on the board and then check the "modetty0" or
"modetty1" variable as appropriate to determine the UART configuration.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14048/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Only one defconfig has a STACKPROTECTOR value. And it asks for
the strong variant, which isn't supported by older toolchains.
Due to the nature of MIPS having more platform specific code than say
x86, the allyesconfig and allmodconfig aren't as effective for build
coverage. So, in addition, I like to use a trivial script to walk all
the defconfigs and build each one.
However I will get false positives on unsupported stackprotector values
with an older toolchain like gcc-4.6.3. As in this instance I am just
using the compiler as a glorified syntax checker on a machine where I
build a bunch of other arch for the same reason, there is no real
motivation to get a newer toolchain for improved optimization etc.
Since there is only one of them, and there is nothing about these
settings that are board/platform specific, I propose we just eliminate
the existing instance and take the default.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: James Hartley <james.hartley@imgtec.com>
Cc: Ionela Voinescu <ionela.voinescu@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13846/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Pull MIPS updates from Ralf Baechle:
"This is the main pull request for MIPS for 4.8. Also includes is a
minor SSB cleanup as SSB code traditionally is merged through the MIPS
tree:
ATH25:
- MIPS: Add default configuration for ath25
Boot:
- For zboot, copy appended dtb to the end of the kernel
- store the appended dtb address in a variable
BPF:
- Fix off by one error in offset allocation
Cobalt code:
- Fix typos
Core code:
- debugfs_create_file returns NULL on error, so don't use IS_ERR for
testing for errors.
- Fix double locking issue in RM7000 S-cache code. This would only
affect RM7000 ARC systems on reboot.
- Fix page table corruption on THP permission changes.
- Use compat_sys_keyctl for 32 bit userspace on 64 bit kernels.
David says, there are no compatibility issues raised by this fix.
- Move some signal code around.
- Rewrite r4k count/compare clockevent device registration such that
min_delta_ticks/max_delta_ticks files are guaranteed to be
initialized.
- Only register r4k count/compare as clockevent device if we can
assume the clock to be constant.
- Fix MSA asm warnings in control reg accessors
- uasm and tlbex fixes and tweaking.
- Print segment physical address when EU=1.
- Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO.
- CP: Allow booting by VP other than VP 0
- Cache handling fixes and optimizations for r4k class caches
- Add hotplug support for R6 processors
- Cleanup hotplug bits in kconfig
- traps: return correct si code for accessing nonmapped addresses
- Remove cpu_has_safe_index_cacheops
Lantiq:
- Register IRQ handler for virtual IRQ number
- Fix EIU interrupt loading code
- Use the real EXIN count
- Fix build error.
Loongson 3:
- Increase HPET_MIN_PROG_DELTA and decrease HPET_MIN_CYCLES
Octeon:
- Delete built-in DTB pruning code for D-Link DSR-1000N.
- Clean up GPIO definitions in dlink_dsr-1000n.dts.
- Add more LEDs to the DSR-100n DTS
- Fix off by one in octeon_irq_gpio_map()
- Typo fixes
- Enable SATA by default in cavium_octeon_defconfig
- Support readq/writeq()
- Remove forced mappings of USB interrupts.
- Ensure DMA descriptors are always in the low 4GB
- Improve USB reset code for OCTEON II.
Pistachio:
- Add maintainers entry for pistachio SoC Support
- Remove plat_setup_iocoherency
Ralink:
- Fix pwm UART in spis group pinmux.
SSB:
- Change bare unsigned to unsigned int to suit coding style
Tools:
- Fix reloc tool compiler warnings.
Other:
- Delete use of ARCH_WANT_OPTIONAL_GPIOLIB"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (61 commits)
MIPS: mm: Fix definition of R6 cache instruction
MIPS: tools: Fix relocs tool compiler warnings
MIPS: Cobalt: Fix typo
MIPS: Octeon: Fix typo
MIPS: Lantiq: Fix build failure
MIPS: Use CPHYSADDR to implement mips32 __pa
MIPS: Octeon: Dlink_dsr-1000n.dts: add more leds.
MIPS: Octeon: Clean up GPIO definitions in dlink_dsr-1000n.dts.
MIPS: Octeon: Delete built-in DTB pruning code for D-Link DSR-1000N.
MIPS: store the appended dtb address in a variable
MIPS: ZBOOT: copy appended dtb to the end of the kernel
MIPS: ralink: fix spis group pinmux
MIPS: Factor o32 specific code into signal_o32.c
MIPS: non-exec stack & heap when non-exec PT_GNU_STACK is present
MIPS: Use per-mm page to execute branch delay slot instructions
MIPS: Modify error handling
MIPS: c-r4k: Use SMP calls for CM indexed cache ops
MIPS: c-r4k: Avoid small flush_icache_range SMP calls
MIPS: c-r4k: Local flush_icache_range cache op override
MIPS: c-r4k: Split r4k_flush_kernel_vmap_range()
...
- platform: rename 'ide-disk' to 'disk-activity'
- defconfig: rename 'LEDS_TRIGGER_IDE_DISK' to 'LEDS_TRIGGER_DISK'
Signed-off-by: Stephan Linz <linz@li-pro.net>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
This option was replaced by PAGE_COUNTER which is selected by MEMCG.
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Enable CONFIG_MTD_BCM63XX_PARTS in arch/mips/configs/bmips_be_defconfig
since this is a necessary option to parse the built-in flash partition
table on BMIPS big-endian SoCs (Cable Modem and DSL).
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Cc: cernekee@gmail.com
Cc: jogo@openwrt.org
Cc: simon@fire.lp0.eu
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12256/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Some drivers for SoC provided functionality are missing.
Enable to those in defconfig to provide better build/testing coverage.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: David Daney <ddaney.cavm@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12750/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
CONFIG_KEYS_DEBUG_PROC_KEYS is no longer an option as /proc/keys is now
mandatory if the keyrings facility is enabled (it's used by libkeyutils in
userspace).
The defconfig references were removed with:
perl -p -i -e 's/CONFIG_KEYS_DEBUG_PROC_KEYS=y\n//' \
`git grep -l CONFIG_KEYS_DEBUG_PROC_KEYS=y`
and the integrity Kconfig fixed by hand.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Andreas Ziegler <andreas.ziegler@fau.de>
cc: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
Pull MIPS updates from Ralf Baechle:
"These are the highlists of the main MIPS pull request for 4.4:
- Add latencytop support
- Support appended DTBs
- VDSO support and initially use it for gettimeofday.
- Drop the .MIPS.abiflags and ELF NOTE sections from vmlinux
- Support for the 5KE, an internal test core.
- Switch all MIPS platfroms to libata drivers.
- Improved support, cleanups for ralink and Lantiq platforms.
- Support for the new xilfpga platform.
- A number of DTB improvments for BMIPS.
- Improved support for CM and CPS.
- Minor JZ4740 and BCM47xx enhancements"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (120 commits)
MIPS: idle: add case for CPU_5KE
MIPS: Octeon: Support APPENDED_DTB
MIPS: vmlinux: create a section for appended DTB
MIPS: Clean up compat_siginfo_t
MIPS: Fix PAGE_MASK definition
MIPS: BMIPS: Enable GZIP ramdisk and timed printks
MIPS: Add xilfpga defconfig
MIPS: xilfpga: Add mipsfpga platform code
MIPS: xilfpga: Add xilfpga device tree files.
dt-bindings: MIPS: Document xilfpga bindings and boot style
MIPS: Make MIPS_CMDLINE_DTB default
MIPS: Make the kernel arguments from dtb available
MIPS: Use USE_OF as the guard for appended dtb
MIPS: BCM63XX: Use pr_* instead of printk
MIPS: Loongson: Cleanup CONFIG_LOONGSON_SUSPEND.
MIPS: lantiq: Disable xbar fpi burst mode
MIPS: lantiq: Force the crossbar to big endian
MIPS: lantiq: Initialize the USB core on boot
MIPS: lantiq: Return correct value for fpi clock on ar9
MIPS: ralink: Add missing clock on rt305x
...
Update bmips_be_defconfig and bmips_stb_defconfig to have GZIP ramdisk
support enabled by default as well was timed printks.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Kevin Cernekee <cernekee@gmail.com>
Reviewed-by: Dragan Stancevic <dragan.stancevic@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: blogic@openwrt.org
Cc: jogo@openwrt.org
Patchwork: https://patchwork.linux-mips.org/patch/11307/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts mpc30x_defconfig to use libata PATA
drivers.
PS This platform still uses "ide0=base[,ctl[,irq]]" hack in
its defconfig. The hack itself has been removed in 2008 and
this platform should be converted to using PATA platform host
driver (pata_platform) instead.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: linux-mips@linux-mips.org
Cc: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11141/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts maltaup_xpa_defconfig to use libata PATA
drivers (tc86c001 IDE host driver has no corresponding libata
driver yet so it is not converted).
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11140/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts maltaup_defconfig to use libata PATA
drivers.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11142/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts maltasmvp_eva_defconfig to use libata PATA
drivers.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11139/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
